Viper clamping technology and accessories
|
|
|
- Barrie McDonald
- 5 years ago
- Views:
Transcription
1 Viper clamping technology and accessories good better BLUE
2 GDS VIPER VIPER is the powerhouse of our GDS clamping series Precise, fast, versatile & strong perfectly equipped for wide variety of applications VIPER technology has been developed especially for highperformance grinding centers. Built for use with high precision ~8º collets, Viper delivers intense holding forces for a consistent grinding process. Its fast setup, huge diameter range, deep collet depth, and high repeatability make it perfect for a wide variety of tool manufacturing and regrinding needs. Combined with our CoFix wrench, you reduce set-up times to a minimum as you change your collets easier, quicker and safer than ever before. VIPER technology perfectly equipped for a wide variety of applications GDS - The Precision Makers Intense holding forces, versatile applicability and high repeatability with minimal set-up times are basic requirements of economical and cost-efficient manufacturing. Extreme holding forces for consistent grinding performance High concentricity and repeatability: TIR of ~5 microns at 2½xD Adjustable run-out Huge clamping range using standard Nann collets Extremely durable Safe and easy collet change within seconds using GDS CoFix wrench 2 Due to constant improvements to and further developments of our designs, the information and illustrations in this brochure are non-binding. The specifications and mounted lengths provided by the machine manufacturer must be observed. All specifications are in mm.
3 GDS VIPER VIPER Micro VIPER Mini VIPER L VIPER S VIPER XL 3
4 GDS VIPER S Nann 3148E VIPER S Nann 3148E Collet - maximum bore ø10 4 Due to constant improvements to and further developments of our designs, the information and illustrations in this brochure are non-binding. The specifications and mounted lengths provided by the machine manufacturer must be observed. All specifications are in mm.
5 GDS VIPER S Nann 3148E VIPER S Nann 3148E Collet - maximum bore ø10 (15) 55 40, ø100 ø61 ø42 ø25 ø69,95 (30 ) (21,8 ) (36 ) Delivery includes: USB flash drive with instructions D L VIPER S Nann 3148E 69,95 70 Helitronic Mini Power ((excluding Helitronic Mini Automation)) Helitronic Power Helitronic Vision Helitronic Essential Essential Automation MX7 MX7 Linear MX5 MX5 Linear Accessories: Cofix 12 (for W15 and Nann 3148E) Screw-in tool for clamping sleeves Adapter flange ANCA with actuating pushrod 30 ø64 ANCA MX 5, ANCA MX 7 5
6 GDS VIPER L Nann 3718E VIPER L Nann 3718E Collet - maximum bore ø27 6 Due to constant improvements to and further developments of our designs, the information and illustrations in this brochure are non-binding. The specifications and mounted lengths provided by the machine manufacturer must be observed. All specifications are in mm.
7 GDS VIPER L Nann 3718E VIPER L Nann 3718E Collet - maximum bore ø27 (22) ø114 ø102 ø76,4 ø51 ø69,95 (30 ) (20,4 ) Delivery includes: USB flash drive with instructions D L VIPER L Nann 3718E 69,95 90 Helitronic Mini Power ((excluding Helitronic Mini Automation)) Helitronic Power Helitronic Vision Helitronic Essential MX7 MX7 Linear MX5 MX5 Linear Accessories: Cofix 32 (for Nann 3718E) Screw-in tool for clamping sleeves Adapter flange ANCA with actuating pushrod ø96 ANCA MX 5, ANCA MX 7 7
8 GDS VIPER XL Nann 3851E VIPER XL Nann 3851E Collet - maximum bore ø36 8 Due to constant improvements to and further developments of our designs, the information and illustrations in this brochure are non-binding. The specifications and mounted lengths provided by the machine manufacturer must be observed. All specifications are in mm.
9 GDS VIPER XL Nann 3851E VIPER XL Nann 3851E Collet - maximum bore ø36 (25) ø114 ø102 ø95 ø66 ø69,95 (30 ) (9,15 ) Delivery includes: USB flash drive with instructions D L VIPER XL Nann 3851E 69, Helitronic Mini Power ((excluding Helitronic Mini Automation)) Helitronic Power Helitronic Vision Helitronic Essential MX7 MX7 Linear MX5 MX5 Linear Accessories: Cofix 45 (for Nann 3851E) Screw-in tool for clamping sleeves Adapter flange ANCA with actuating pushrod ø96 ANCA MX 5, ANCA MX 7 9
10 GDS VIPER Nann 3409E Micro VIPER Nann 3409E Micro Collet - maximum bore ø16 10 Due to constant improvements to and further developments of our designs, the information and illustrations in this brochure are non-binding. The specifications and mounted lengths provided by the machine manufacturer must be observed. All specifications are in mm.
11 GDS VIPER Nann 3409E Micro VIPER Nann 3409E Micro Collet - maximum bore ø16 (22) ø89 ø78 ø59,4 ø34 ø49,95 (30 ) (20,6 ) Delivery includes: USB flash drive with instructions D L Helitronic Micro VIPER Nann 3409E Micro 49,95 80 Accessories: CoFix 20 (for W20 and Nann 3409E) Screw-in tool for clamping sleeves 30 ø64 11
12 GDS VIPER Nann 3409E Mini VIPER Nann 3409E Mini Collet - maximum bore ø16 12 Due to constant improvements to and further developments of our designs, the information and illustrations in this brochure are non-binding. The specifications and mounted lengths provided by the machine manufacturer must be observed. All specifications are in mm.
13 GDS VIPER Nann 3409E Mini VIPER Nann 3409E Mini Collet - maximum bore ø16 (22) ø89 ø78 ø59,4 ø34 ø49,95 (30 ) (20,6 ) Delivery includes: USB flash drive with instructions D L Helitronic Mini Automation VIPER Nann 3409E Mini 49,95 80 Accessories: CoFix 20 (for W20 and Nann 3409E) Screw-in tool for clamping sleeves 30 ø64 13
14 μgrind HPS 20 // HPS 20L Nann 3409E μgrind HSK μgrind Hydro In North America contact: Toolroom Solutions Inc Old Block House Ln Spotsylvania, VA USA Tel: +1 (540) Web:
grindsmart 529xw english
grindsmart 529xw english smart grinding unlimited grinding solutions The GrindSmart 529XW is a 5-axis precision tool grinder for the manufacturing of standard and high performance cutting tools from Ø
Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
SHRINK FIT CHUCKS CAT BT HSK CAPTO.
SHRINK FIT CHUCKS CAT BT HSK CAPTO www.haimer.com HAIMER SHRINK FIT TECHNOLOGY Features Benefits 360 Clamping, Multiple planes Precision bore, no wear components No mechanical moving parts Induction shrink
Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY
Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service
PERFORMANCE AND SPECIFICATION. BORING DIAMETER RANGE 1.5 to 24 BORING BAR STROKE 305, 610 or 915mm 12, 24, or 36
MLB610 Line Boring Machine Rev 1.0 Page 1 of 9 DESCRIPTION A versatile and modular line boring machine offering a choice of electric, hydraulic and pneumatic boring bar drive motors, with a mechanical
GTO Precise, universal stationary chuck for collets
Precise, universal stationary chuck for collets Advantages of the stationary chuck: Rapid and easy mounting Quick change of the standard collets Sensitive adjustment of the clamping force possible Highest
SERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
Extremely small dimensions, extremely high precision.
Product innovations Edition 2011-1 Drilling and threading _TOOL INNOVATIONS IN DRILLING Extremely small dimensions, extremely high precision. SOLID CARBIDE DRILLS Walter Titex X treme the universal high-performance
Metalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
ER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
Diamond Roller Dressers for Conventional Grinding Wheels, Diamond & CBN Wheels. Diamond Roller Dressers for Gear Manufacturing - Worm Grinding.
Diamond Roller Dressers for Conventional Grinding Wheels, Diamond & CBN Wheels. Diamond Roller Dressers for Gear Manufacturing - Worm Grinding. Shinhan Diamond Industrial Co., Ltd. has produced a variety
CrazyDrill TM Cool XL
CrazyDrill TM Cool XL NEW Extra long High Performance Drills 2 1 shot = 1 hole CrazyDrill Cool XL for deep hole drilling With the new CrazyDrill Cool XL, the engineers from Mikron Tool have developed a
4000 Series Windows. Value and Versatility from Vytex Windows
4000 Series Windows Value and Versatility from Vytex Windows Energy Efficient Single-Hung Windows for All Your Needs. WINDOW ANATOMY Block and tackle mechanism guarantees easy, dependable operation every
powrgrip for mold & die Trustworthy toolholding solutions
powrgrip for mold & die Trustworthy toolholding solutions REGO-FIX Corporation Providing solutions for cutting-edge toolholding table of contents powrgrip for Medical/Dental Introduction 01 Features and
HIGH PRECISION HIGH PERFORMANCE
Tool holders www.haimer-usa.com HIGH PRECISION HIGH PERFORMANCE HAIMER Family owned & operated since 1977 Global Headquarters located in Igenhausen Germany North America operation and stocking facility
IN-FURROW PARALLELOGRAM PLOUGH Adjustments have never been so quick! Unico
IN-FURROW PARALLELOGRAM PLOUGH Adjustments have never been so quick! Unico IN-FURROW MOUNTED PLOUGH STRONG, ACCURATE, SMART... UNICO! UNICO is featured with a special parallelogram linkage system designed
Ring Type. Lever Type. Straight Type. Torque Type. Long Type. 90 Mini Angle Type. 90 Mini Angle Type (Very Small Head) 90 Angle Type.
ULTRA-PRECISION HIGH TORQUE AIR GRINDER System Chart Model Price Attachment ispeed E0 E0 E00 E000 RE00 IR-0 9.00 RE0 IH-00 9.00 IG-00.00 RE0 HG-00 9.00,000 min - (rpm) Max. ( ) RE0 BMH-00 9.00 RE0 MFC-00S.00,000
DME HYDRAULIC LOCKING CORE PULL CYLINDERS Specification No. ME-E (A) Part No. HLCP-PS02 Page 1 of 13
Specification No. ME-E32-0002(A) Part No. HLCP-PS02 Page 1 of 13 IMPORTANT SAFETY INFORMATION 1. To avoid injury, exercise caution by reading these instructions before servicing or operating the system.
ACE LOCK Milling Chucks
ACE LOCK Milling Chucks Run-out accuracy: 10 µm/0.0004 at the distance of 100 mm/4.00 from the end of the holder. Milling Chucks Spiral slits are precision-machined with a laser securely hold the cutter
FEEDING BUCKETS MX BD1202 MX BD1402 MX BD2002 MX BD2402 MX BD3102
FEEDING BUCKETS MX BD1202 MX BD1402 MX BD2002 MX BD2402 MX BD3102 We dare to innovate; in our relationships, in our techniques, in our products and services. Together with our business partners, our ambition
Features and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
Air Polishers. effective high power output - low weight ergonomic long lifespan
Screwdriving Technology Automation Air Motors Air Tools Air s effective high power output - low weight ergonomic long lifespan Our polishers are designed to perform best on heavy duty, industrial applications.
SG9MTS Cylinder Head Seat & Guide Machine
SG9MTS Cylinder Head Seat & Guide Machine The Speed of Live and the Accuracy of Fixed Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. SG9MTSMTS CYLINDER
BMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
Collet Chucks and Collets
ollet hucks and ollets a complete collection of top quality products for bar and second operation work from the world s number one name in workholding Product Index Short Length ollet hucks... 5 5 & 16
1 Collets and collet sleeves
1 1.3 Wibemo - Honing sleeve 1.4 Wibemo - Extenso collets 1.6 Wibemo - Croco collets 1.10 Wibemo - CuBe collets 1.11 Wibemo - Phenol collets 1.12 Custom made collets 1.18 Wibemo - Wifex collets 1.22 Tornos
Modules for fine machining. Guhring modules 6x6 and 4x4. NEW: Module 6x6
NEW: Module 6x6 simple, quick and highly accurate setting of 6-fluted tools minimal tension thanks to 6 setting elements perfect balancing with 6 balancing screws Modules for fine machining Guhring modules
STANDARD ONDUFIL TM MULTI-TURN SPRING WASHER RANGE
per turn RD0223S320025IX 22.0 18.0 2.0 x 0.25 3.5 3 5.8 3.0 4.0 1.4 RD0223S420025IX 4 7.8 4.0 4.0 1.0 RD0223S520025IX 5 9.6 4.3 4.0 0.7 RD0223S620025IX 6 11.0 5.0 4.0 0.7 RD0223S720025IX 7 12.7 5.8 4.0
WORKHOLDING SYSTEMS
www.ptgworkholding.co.uk WORKHOLDING SYSTEMS INSTALLATION & PRE-LOADING INSTRUCTIONS INSTALLATION & PRE-LOADING INSTRUCTIONS Pre-load Flats Machine Drawbar M/C Spindle Pre-load Adjustment Screw Mandrel
Stainless Steel Air Motors P1V-S
Stainless Steel Air Motors P1V-S An ideal choice for the food grade applications, and in all other ATEX applications where there is a risk of corrosion. Designed for demanding applications and available
CAT PG 5 TC PG 6 BT PG 7 CYL PG 8 HSK PG 9 REGO-FIX CAPTO PG 10 REGO-PLUS CAT+ PG
powrgrip System 1 powrgrip Toolholders - Features Benefits 2 Features Benefits 3 Information 4 CAT Toolholders 5 TC Toolholders 6 BT Toolholders 7 CY Toolholders 8 HSK Toolholders 9 REGO-FIX CAPTO Toolholders
Typical Installation Schematic
The 760 Gate Automation System The FAAC 760 automation system consists of a monoblock hydraulic unit and foundation box assembly. The system is designed for underground installation, and will not alter
HES810 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE
ispeed E0 E0 E00 E000 ø0." ø0.9" ø0." ø0.9" HES0 -p0 ULTRA-PRECISION HIGH-SPEED MILLING SPINDLE Specifications Speed... 0,000-0,000 min - (rpm) Ideal Operating Speed... 0,000-0,000 min - (rpm) Max. Output
Locking Assemblies Shrink Discs Rigid Couplings.
M I N I Locking Assemblies Shrink Discs Rigid Couplings www.mav.it our company We are an Italian company world renowned for our creativity and ethics. Established in 1989 we have rapidly built a reputation
SE SE8000 SERIES. Choppers for all needs and working conditions
SE KUBOTA CHOPPERS SE1000 - SE8000 SERIES Choppers for all needs and working conditions 2 VERSATILE, RELIABLE , EFFICIENT! CHOPPERS FOR ALL CONDITIONS The hallmark of Kubota grass and straw choppers is
Swiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
Accessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
ONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps. 82M-3E Series Enclosed Power Clamp. destaco.com
ONE WORLD. ONE CLAMP. YOUR WAY. The Most Flexible and Complete Family of Clamps 82M-3E Series Enclosed Power Clamp destaco.com 2 A Global Presence Netherlands Charlevoix, MI USA UK Red Wing, MN USA Wheeling,
YAMAHA PROPELLERS YAMAHA MARINE POWER PROPELLERS YAMAHA PROPELLERS
Your choice of propeller makes a huge difference in a Yamaha outboard s acceleration, top-end speed, handling even it s fuel efficiency. Only Yamaha has access to the proprietary information that can produce
Alberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30
350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &
ACTUATING Standard programme TOOLTRONIC and facing heads
84 ACTUATING Standard programme TOOLTRONIC and facing heads ACTUATING Standard programme TOOLTRONIC and facing heads 85 85 Standard programme TOOLTRONIC / facing heads FACING HEADS Facing heads are used
MX U6 MX U8 MX U10 MX U12. Economical solution. to your daily handling requirements
MX U6 MX U8 MX U10 MX U12 UTILITY LADERS AGRICULTURE Economical solution to your daily handling requirements UTILITY LADERS AGRICULTURE Quick and effective to use with maximum ease MX SYSTEM Instant hitching
Stub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
A popular tool grinder just got better
A popular tool grinder just got better The MX Linear tool grinder range is specifically designed to meet the needs of tool production facilities seeking maximum output while remaining flexible to customer
Rotac Plus. Automationware. High rigidity, accuracy and positioning repeatability on large variety of sizes.
48 65 85 100 130 200 High rigidity, accuracy and positioning repeatability on large variety of sizes. 48 65 85 100 130 200 High rigidity, accuracy and positioning repeatability on large variety of sizes
E2530 SERIES E2550 SERIES E3000 SERIES E3200 SERIES E4000 SERIES 5 AIR LINE KIT 7 TECHNICAL DATA 8 APPLICATION EXAMPLES
ispeed E0 SERIES,000~0,000 min - (rpm) Output W Outside Diameter (ø. mm) The E0 Series is capable of up to 0,000 min - (rpm) and employs a high-speed, ultra-quiet brushless motor. High-performance system
ROWEKO LOAD-SECURING EQUIPMENT
84 www.roweko.de Transportation tube for roof rack How long do you need to securely tie tubes or similar long goods onto your roof rack? How certain are you that you don t lose anything during your journey
cost-effective automation
cost-effective automation compact units for drilling tapping milling www.e2systems.com AIR HYDRAULIC DRILLING UNIT BE(FP)22 AIR HYDRAULIC DRILLING UNIT BE(F) 22 The basic design of the BE(F) 22 consists
MAINTENANCE TOOLS. Equipping you to install, remove and service bearings, gears, wheels and other industrial and automotive parts.
MAINTENANCE TOOLS Equipping you to install, remove and service bearings, gears, wheels and other industrial and automotive parts. CONTENTS: User Safety Instructions.....................................3
CAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
Multi-Lock Milling Chuck
Multi-Lock Milling Chuck KEY BENEFITS: Built-in Major Dream vibration dampening system Incredible gripping force Superior rigidity & durability Exacting run-out accuracy Increased tool life improved cutting
Toolholder Bushings TYPE C. Note: Special bore sizes made to order. TYPE Z 3 Lengths Available
Toolholder ushings TYPE C This CNC Type C ushing is designed for universal use on all CNC turning machines. To adapt a wide variety of oring ars, Drills, Reamers and Shank type tools. Precision machine
brochure PN
brochure PN-2013-01 www.bitorq.com/pneumatic.html Pneumatic Actuators PAGES 4-11 ON THE WEB AT BITORQ.COM/PNEUMATIC_PN.HTML COMPACT, RELIABLE DESIGN OPEN-CLOSED ADJUSTMENT STOPS DOUBLE ACTING AND SPRING
ZINSSER-MINILAB A Complete Laboratory in a Case
ZINSSER-MINILAB A Complete Laboratory in a Case The Zinsser-Minilab has been used in many European schools since the late 80s, but has also become a useful tool for the development and testing of new strategies
WINNER! ALBRECHT. Precision Chucks
WINNER! ALBRECHT Precision Chucks At present, the Albrecht APC is the best performing chuck world wide. In the area of speed, tool life and safety. 3 4 You can expect: A clearly higher chip removal rate
Compact. Flat. Productive. Compact Change System CWS
CWS Compact. Flat. Productive. Compact Change System CWS Compact manual change system with integrated air feed-through for the most important SCHUNK gripping and compensating modules. Field of Application
Info Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
EDM Drilling Power. start
EDM Drilling Power Three models and endless possibilities. Mitsubishi Electric.... 5 Highlights... 7 Design.... 9 Simple operation.... 11. Practical and well thought out.... 13 Service... 15 Key data...
isaregisteredtrademarkofcustom Machine&ToolCo.,Inc.Copyright Custom Machine&ToolCo.,Inc.Alrightsreserved.
CMT isaregisteredtrademarkofcustom Machine&ToolCo.,Inc.Copyright 1998-2017Custom Machine&ToolCo.,Inc.Alrightsreserved. WHAT IS CONCENTRIC MAXI TORQUE? CMT is a revolutionary new keyless tapered bushing,
Actuator Capabilities
Actuator Capabilities The Compact Difference... Compact Automation Products brand, is a market-leading manufacturer of space-efficient linear actuator solutions including, industry standard and custom
PVC Casing Cutter - Single Cutting Wheel (SCW) Sizes & , Operators Manual
Brook Engineering Pty. Ltd. 13 Pleasant Grove, Holden Hill, S.A. 5088 Ph +61 8 8264 3895 Fax +61 8 8396 4788 Email brook@brookeng.com.au Web www.brookeng.com.au Brook Engineering is a diversified and experienced
CrazyDrill TM Cool. The Mikron Tool drilling concept
CrazyDrill TM Cool The Mikron Tool drilling concept 2 Usable length x d 25 coated Item number uncoated d (k5) l (± 0.1) D (h) L D Powerchamber L effective length l Shank with Coolant Powerchamber for small
Integrated Process Solutions. Series 88. CF Component Ultra high vacuum fittings Sizes 1 1/3'' to 4 5/8''
Integrated Process Solutions w w w. m k s i n s t. c o m Series 88 CF Component Ultra high vacuum fittings Sizes '' to '' Manufactured by MKS to industry standards, Series 88 components are a full line
K mAh Jump Starter
K12 8000mAh Jump Starter User Manual Thank you for choosing Suaoki. Suaoki K12 is a 3-in-1 device, functioning as a jump starter to boost flat car battery, as a portable power bank to charge your electronic
Measuring Spark Plug M10x1
Pressure Measuring Spark Plug M10x1 with Integral 3 mm Cylinder Pressure Sensor and Replaceable Cable Measuring spark plug Type 6113B... allows cylinder pressure measurement without the effort of providing
SRU-mini. Application example. Pneumatic Rotary Actuators Universal Rotary Actuators. Weight 0.15 kg 0.65 kg. Torque 0.16 Nm 1.
SRU-mini Sizes 8 14 Weight 0.15 kg 0.65 kg Torque 0.16 Nm 1.15 Nm Axial force 255 N 330 N Bending moment 2.5 Nm 4.5 Nm Application example Reversing unit for the economical reorientation of cylindrical
Balanced to G RPM s. the nose nut to be tightened to 100% Inspected,
WEER CHUCKS Mae in Why is the Weler Chuck the Best Choice? WHY THE esigne for Milling & rilling WEER CHUCK? The Weler Chuck is the most versatile chuck available in the market place toay! Balance to G2.5
Leading the Way... In CNC Tooling Technology in the 21 st Century
Leading the Way... In CNC Tooling Technology in the 21 st Century Leading the Way... In CNC Tooling Technology in the 21 st Century We specialize in CNC tooling and workholding devices for horizontal and
PERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES
The lightweight, durable, low-profile H-Block design is the most versatile of our rod cylinder slides. It also has one of the highest ratings of load weight vs extension for its kind in the industry. The
Solid Carbide Performance Routers
Solid Carbide Routers Manufactured in Manufactured inthe theus US Distributed in Distributed inthe theuk UK Plastics crylic BS luminium PVC Nylon Polypropylene Polycarbonate Solid Carbide 1-Flute O-Flute
Machine Tool Grade Ball Screw Linear Actuators
Machine Tool Grade Ball crew Linear Actuators High Precision With Force To 15,000 LBf Rugged teel Construction Designed For High ystem tiffness Flexible Design To uit Any Motor Protected From Contamination
NFPA Style Hydraulic Rod Clamps RCH SERIES ROD LOCKS
NFPA Style Hydraulic Rod Clamps RCH SERIES ROD LOCKS FEATURES AND BENEFITS The AMLOK Rod Clamp has been developed to provide poweroff clamping of rods and shafts. The type RCH Rod Clamps are actuated by
Series 16: ø 8, 10, 12 mm Series 24: ø 16, 20, 25 mm - magnetic Series 25: 16, 20, 25 mm - magnetic, cushioned
> Series 6, 24 and 25 mini-cylinders Series 6, 24 and 25 mini-cylinders Series 6: ø 8, 0, 2 mm Series 24: ø 6, 20, 25 mm - magnetic Series 25: 6, 20, 25 mm - magnetic, cushioned» Single-acting and double-acting»
AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 250 WEST DUARTE ROAD, #E MONROVIA, CA USA
AMERICAN ROTARY TOOLS CO. (ARTCO TOOLS) 0 WEST DUARTE ROAD, #E MONROVIA, CA USA 90- Tel: () - Fax: () -00 Toll Free USA Tel: (00) - Fax: (00) -0 Email: info@artcotools.com HAND WORK SOLUTIONS Micro-Grinder
POSITIONERS and Controls for Complete Valve Automation
CONTROLS A Division of AT Controls Pneumatic & Electro-Pneumatic POSITIONERS and Controls for Complete Valve Automation 1 SS SERIES SS Features Easy and quick auto-calibration Detecting RA (reverse acting)
Tradition in Perfection.
Angular Heads Tradition in Perfection. For more than 50 years the name ROMAI has stood for the highest precision and process reliability in machining. The next generation begins today. We have succeeded
SBT SERIES SWING BEAM SHEAR
The Winning Force SBT SERIES SWING BEAM SHEAR Perfect Cutting Hi-Speed Heavy Duty Accurate Efficient 1 SBT_ENG_V.indd 1 24.09.2016 17:52 The Winning Force 2 SBT_ENG_V.indd 2 24.09.2016 17:53 As a total
GMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
E Range of Electro - Hydraulic Linear and Rotary Actuators. Technical Specification.
E Range of Electro - Hydraulic Linear and Rotary Actuators Technical Specification www.advanced-actuators.com Basic Design Concept Please note this brochure is purely an overview of our product range.
Maximum productivity even on the most challenging sites.
Igo T Range Maximum productivity even on the most challenging sites www.manitowoccranes.com The Igo T range Successfully combining Power & Productivity Improving site productivity is a daily challenge.
METAL. Faster core drilling. In metal, in any situation. FEIN core drills KBU and KBH powerful and universal tools for efficient metal drilling.
METAL Faster core drilling. In metal, in any situation. FEIN core drills KBU and KBH powerful and universal tools for efficient metal drilling. NEW CORE DRILLING Get to the core of the matter faster. With
Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :
![Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :](/thumbs/93/112621325.jpg "Factor 1) Modulating torque 4) [Nm] 200 F14 G1/2 GK : :")
Nominal Max. valve 4) Valve Valve attachment Type Reduction ratio EN ISO 5210 Factor 1) Nominal Gearbox Max. input s Input shaft 2) Weight 3) Option DIN 3210 Option [kg] 120 60 GK 10.2 1:1 0.9 135 66 20
KRANE-KING Jib & Gantry Cranes Gantries Free Standing Jibs Tension & Cantilevered Jibs Hoists
KRANE-KING Jib & Gantry Cranes Gantries Pages H.4 - H.17 Free Standing Jibs Pages H.18 - H.30 Tension & Cantilevered Jibs Pages H.31 - H.35 Hoists Pages H.36 - H.42 Index to Krane-King Jib & Gantry Cranes
ESPERT ROTUS ECOMO IMPULSE PRESTO II SHEENUS
HAND WORK E0 E0 ø." ø.0" E00 ø.0" ø." ø0.9" ø.0" HES0 HES0 HAND WORK SOLUTIONS Micro-Grinder Electrically Driven Emax EVOlution,000~0,000 min - (rpm) ULTRA-PRECISION BRUSHLESS MICRO-GRINDER Digital display
Creating Linear Motion One Step at a Time Precision Linear Motion Accomplished Easily and Economically
Creating Linear Motion One Step at a Time Precision Linear Motion Accomplished Easily and Economically How Is a Linear Actuator Sized? Sizing a linear actuator is quite easy once you understand the basic
E3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
The Winning Force SBT SERIES SWING BEAM SHEAR. Perfect Cutting Hi-Speed Heavy Duty Accurate Efficient
The Winning Force SBT SERIES SWING BEAM SHEAR Perfect Cutting Hi-Speed Heavy Duty Accurate Efficient 1 2 The Winning Force As a total supplier for sheet metal manufacturing with almost 60 years of experience,
Model MC-21 Impact Press. Operation & Maintenance Instructions. Revised 9/20/07
Model MC-21 Impact Press Operation & Maintenance Instructions Revised 9/20/07 1 WARNINGS 1. Safety glasses must always be worn by the machine operator, as well as any co-workers, or any other persons in
QUARTER-TURN ELECTRIC ACTUATORS
QUARTER-TURN ELECTRIC ACTUATORS PRODUCT FEATURES & BENEFITS Sizes: QTE-1.5 / QTE-3.0 / QTE-6.0 Motor split-phase, capacitor driven; 25% Duty cycle 24/115/230VAC, 80% Duty Cycle 12/24 VDC Gearing hardened
PNEUMATIC LINEAR ACTUATORS SECTION 1
PNEUMATIC LINEAR ACTUATORS SECTION 1 1-888-638-6337 Typical Applications: Larger versions of these examples are available on the CD-ROM version of our catalog or on our web site: www.meto-fer.com Subject
MaxiFit. Wide Tolerance Range Mechanical Pipe Fitting Technology. Universal. Includes. Plus. Pioneers in pipe solutions
Universal MaxiFit Wide Tolerance Range Mechanical Pipe Fitting Technology NOW Includes MaxiFit Plus Easier to fit Reduces installation costs Pioneers in pipe solutions MaxiFit Overview A Versatile Solution
Changeover in seconds!
Changeover in seconds! PZ QUIRI HYDROMECANIQUE 6 Rue Denis Papin 67120 DUTTLENHEIM Tél. : +33 3 88 04 84 00 Fax. : +33 3 88 04 84 01 Email : quiri.hydro@quiri.com QUIRI Hydromécanique is specialized in
Clamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
LM5200 MILLING MACHINE
LM5200 MILLING MACHINE Linear and Gantry Milling in one machine, for X-Axis travel of up to 84 inches (2133.6 mm) and Y-Axis travel of up to 34 inches (863.6 mm). 04 2018 LM52 The Climax LM5200 Milling
Actuator Units NEW All-in-one-solution
Actuator Units NEW All-in-one-solution Axis Servo Motor Amplifier Actuator Units Economy Series ES4 p. 06-07 ES6 p. 08-09 EC3 p. 10-11 EC4 p. 12-13 LM Guide Actuator KR26 p. 16-17 KR33 p. 18-19 Linear
V200 Positioner. V200 P Pneumatic Positioner. V200 E Electropneumatic Positioner. Housing Material: Cast aluminium with polyester coating
V200 Positioner Housing Material: Cast aluminium with polyester coating Indicator Options: Flat pointed indicator or raised indicator (red/green or yellow/black) One housing for pneumatic or electropneumatic
TERRA SPIKE XF / XD. TERRA SPIKE XF and TERRA SPIKE XD the revolution in deep loosening.
Deep aeration and removal of compaction up to a depth of 27 cm, central tine adjustment, central depth adjustment, integrated damping system, integrated tine fitting and removal system, wide range of tines
( 6 ) Technical Data
31494_Jung_JE_engl_lux.qxd 08.03.2003 15:18 Uhr Seite 1 ( 6 ) Technical Data The design principle of the JE series Jung's legendary double V guide is custom-manufactured for each machine in special clamping
Pulley pitch range. Pulley pitch range - Overview. Pulleys and Components. Selftracking Series. Standard Pulley ATL-Series. T-Series.
Pulley pitch range Pulley pitch range - Overview AN-Series A-Series AN 10 AN 12.7 AN 20 Selftracking SFA-Series SFA 10 SFA 15 SFA 20 A 3 A 5 A 10 A(S) 15 A 20 HD/SD-Series HD 3M*) HD 5M*) HD 8M*) HD 14M*)
SPECIFICATIONS Power input (W) No load speed (rpm) Hammer rate (under load) Drilling concrete / steel / wood 24 / 13 / 30 mm
BH 24 IE 24 MM SDS-Plus Rotary Hammer Powerful 800 watt motor 24 mm drilling capacity in concrete Safety clutch for user protection Variable speed electronics for control Hammer action stop for drilling