MaxiFit. Wide Tolerance Range Mechanical Pipe Fitting Technology. Universal. Includes. Plus. Pioneers in pipe solutions
|
|
- Aileen Pope
- 6 years ago
- Views:
Transcription
1 Universal MaxiFit Wide Tolerance Range Mechanical Pipe Fitting Technology NOW Includes MaxiFit Plus Easier to fit Reduces installation costs Pioneers in pipe solutions
2 MaxiFit Overview A Versatile Solution for Pipe Jointing MaxiFit universal pipe couplings are designed to accommodate plain ended pipes with different outside diameters. One fitting is able to connect a wide variety of pipe materials including steel, ductile iron, PVC, cast iron, GRP and asbestos cement pipes amongst others. The range includes the following product lines MaxiFit Plus DN 50 DN 50 MaxiFit small diameter DN 0 DN 00 MaxiFit large diameter DN 50 DN 700 The MaxiFit range is designed and manufactured under quality management systems to BS EN ISO 900 and meets the requirements of the UK Water Regulations & EN 55. Wide Tolerance With up to mm tolerance on the pipe OD it not only eases installation but can reduce the need for expensive and time consuming trial holes, reduce stock holding and increase stock turn over. MaxiFit is an adaptable and economic solution to most pipe connections. MaxiThread MaxiFit Coupling All products in the range have a test pressure of bar on water (9bar on gas) and are suitable for 6bar working pressure for water (6bar on gas). Extensive Range The expansive range is available in sizes DN0 up to DN700 and includes MaxiFit couplings & MaxiFit Xtra long sleeved couplings, MaxiStep reducing couplings, MaxiDaptor flange adaptors, MaxiCap, MaxiThread End Cap, & MaxiFit Large Diameter couplings & flange adaptors. Now Includes MaxiFit Plus couplings and flange adaptors. Quick & Efficient Installation The versatile range is pre-assembled with an innovative gasket which has slide easy ribs that reduce friction on pipes at the upper tolerance range of the fitting, providing maximum sealing pressure, even on scored, pitted and corroded pipe surfaces. The captive non-rotating bolt heads require just a single spanner to install with just one standard bolt torque across the range. The MaxiFit Plus range offers better access to bolts when installing, even in narrow and congested trench conditions. Large Diameter MaxiFit Coupling Pipe Materials Large Diameter MaxiDaptor MaxiStep MaxiDaptor MaxiFit Plus Flange Adaptor MaxiFit Plus Coupling Viking Johnson MaxiFit Telephone: + (0)6
3 MaxiFit Plus Range Product Design Benefits Optimised Design A unique gasket with distinctive circumferential ribs provides a slide easy fit for maximum sealing on scored, corroded or pitted pipe. Excellent Corrosion & Damage Resistance Coated in black Rilsan Nylon which is WRAS listed and has excellent resistance to impact, abrasion, weathering and chemicals. It also has good thermal stability and flexibility to accommodate for rough site handling. Flexible Fit Flared end to the sleeve forms a deep gasket chamber to give maximum possible pipe adjustment. Simple Installation Unique bolt system for quicker and easier installation even in a narrow trench by using readily available hand tools. Customer Benefits Unique three bolt design that allows quicker installation thereby reducing trench risk, available in sizes DN65, DN80 and DN00 MaxiFit Plus offers better leverage for torque Better access to bolts especially when installing in narrow or harsh trench conditions Lighter product for easier handling, storage and shipping, thereby reducing costs. MaxiFit Plus available in sizes DN50 to DN50 Wide tolerance permits lower stock holding All models accommodate angularity between pipes, allowing for normal pipeline movement caused by ground settlement* Design life expectancy of 50 years, established by rigorous Accelerated Age Testing which subjects product to working pressure at 80 C for 000 hours A rigorous bolt torque test is completed to confirm that the bolt, end ring and adaptor body are capable of withstanding bolt over-tightening to.5 times maximum recommended torque Note: *Angularity - Couplings and reducing couplings: offer a maximum of 6 degrees total angular deflection. Flange Adaptors: offer a maximum of degrees total angular deflection; these figures are calculated when using the product on maximum pipe outside diameters. Larger degrees of angular deflection are achievable when product is fitted on smaller pipe outside diameters. Viking Johnson MaxiFit
4 MaxiFit Plus DN50 DN50 Coupling L A A Flange Adaptor L T Maximum Gap M M Maximum Flange S T Maximum Gap MaxiFit Plus Couplings & End Caps Nominal Size MaxiFit Plus Flange Adaptors Nominal Size Size Range Size Range Diameter Overall Sleeve Length Length x Thickness Sleeve Min Max M L (A) x (T) Min Max Diameter Bore Overall Length L Sleeve Length x Thickness Flange Drilling Min Max M S (A) x (T) Min Max DN x 5 60 PN0:6, 65 PN0:6, 80 PN0:6, BS0 Table ADE,.5 ANSI5, ANSI5, 80 AS9 CD, 80 AS087 6 Bolts No-Dia X Length DN x Steel 0 0 -Mx80 9/.7 DN x.5 Ductile Iron 0 0 -Mx80 9/.5 DN x Steel 0 0 -Mx80 9/. DN x.5 Ductile Iron 0 0 -Mx80 9/. DN x Steel 0 0 -Mx80 9/.6 DN x.5 Ductile Iron 0 0 -Mx80 9/.8 DN x Steel 0 0 -Mx80 9/. DN x Steel 0 0 -Mx80 9/6 5. DN x Steel 0 0 -Mx80 9/7 6 Mould Bolts No-Dia X Length Kg Mould MaxiCap Available Kg 0 0 -M x 5 9/.8 DN x 5 DN x 5 80 PN0:6, ANSI5,.5 BS0 Table AD,.5 BS0 Table E 00 PN0:6, BS0 Table AD, BS0 Table E, AWWAC07 D 00 AS9 CD, 00 AS M x 5 9/ M x 5 9/.7 Note: For other sizes of flange adapters, please see MaxiDapter Flange Adapter section. *Angularity - Couplings and reducing couplings: offer a maximum of 6 degrees total angular deflection. Flange Adaptors: offer a maximum of degrees total angular deflection; these figures are calculated when using the product on maximum pipe outside diameters. Larger degrees of angular deflection are achievable when product is fitted on smaller pipe outside diameters. End Ring and Adaptor Body Ductile Iron to BS EN 56 Symbol EN GJS-50-0 Centre Sleeve Sleeve material is rolled Steel to bs en005- grade S75 or Ductile Iron to bs EN56 symbol en gjs-50-0 Compliance with EN 55 EPDM compound Grade E to BS EN 68-, Type WA, WC Nitrile compound to Grade G BS EN 68, Type G Tee Bolts/Bolts Steel to BS EN ISO 898- Property Class.8 Bolt Torque/Spanner Bolt torque 55-65Nm, Spanner size A/F 9mm Nuts Steel to BS EN 90 Grade Washers Stainless Steel to BS 9:Part Grade 0S5 Standard The full MaxiFit Range consists of: MaxiFit Plus MaxiFit MaxiFit Xtra MaxiStep MaxiDaptor MaxiFit Large Diameter MaxiCap MaxiThread End Cap For further info visit: 5 Viking Johnson MaxiFit Telephone: + (0)6
5 MaxiFit Range Product Design Benefits Excellent Corrosion & Damage Resistance Optimised Design A unique gasket with distinctive circumferential ribs provides a slide easy fit for maximum sealing on scored, corroded or pitted pipe. Coated in black Rilsan Nylon which is WRAS listed and has excellent resistance to impact, abrasion, weathering and chemicals. It also has good thermal stability and flexibility to accommodate for rough site handling. Flexible Fit Flared end to the sleeve forms a deep gasket chamber to give maximum possible pipe adjustment. Simple Installation Captive, non-rotating bolt heads require just a torque wrench to install. Customer Benefits Design life expectancy of 50 years, established by rigorous Accelerated Age Testing which subjects product to working pressure at 80 C for 000 hours. Wide tolerances permit lower stock holding. All models accommodate angularity between pipes which allows for normal pipeline movement caused by ground settlement. Couplings and reducing couplings allowing for 6 total angular deflection total on the flange adaptors. A rigorous bolt torque test is completed to confirm that the bolt, end ring and adaptor body are capable of withstanding bolt over-tightening to.5 times maximum recommended torque. Viking Johnson MaxiFit 6
6 MaxiFit, MaxiFit Xtra & MaxiStep Product Design Benefits Simple Installation Available as standard and long sleeved versions, the MaxiFit Xtra simplifies the installation further, allowing for greater cutting tolerances and a greater pipe insertion depth - sealing beyond corrosion damaged pipe ends to create a safe and permanent repair. Excellent Repair Product MaxiStep reducing couplings are designed to provide transitions between pipes of different nominal bores simplifying installations when repairing old pipe with new. Accommodates Pipe Movement All models accommodate angularity between pipes which allows for normal pipeline movement due to ground settlement. Couplings and reducing couplings allow for 6 total angular deflection. MaxiDaptor Product Design Benefits Ultimate Flexibility All cast flanges have multi drilling including; BS EN 09-, ISO 7005 :99, (PN0/6), BS0: 96 (Table ADE), ANSI/AWWA. Exceptional Sealing Capabilities Flanges have an extended sealing face. Accommodates Pipe Movement All models accommodate angularity between pipes which allows for normal pipeline movement caused by to ground settlement. Flange adaptors have a total angular deflection of. 7 Viking Johnson MaxiFit Telephone: + (0)6
7 MaxiFit & MaxiFit Xtra Couplings & End Caps L A Working Pressure = 6bar (water) T M Coupling Maximum Gap Coupling - Standard Sleeve (MaxiFit) Nominal Size Size Range Diameter Overall Length Sleeve Length x Thickness Min Max M L (A) x (T) Min Max Bolts No.-Dia x Length Mould No. DN x M x (kg) MaxiCap Available Maximum Threaded Outlet DN x M x 80 9/.0 DN x M x 80 9/.6 DN x M x 80 9/. DN x M x 80 9/.8 DN x M x 80 9/6 6.0 DN x M x 80 9/7 6.9 DN x M x 0 9/9 9. DN x M x 0 9/0 0.9 DN x M x 0 9/. DN x M x 0 9/.6 DN x M x 0 9/ 9. Coupling - Long Sleeve (MaxiFit Xtra) DN x M x 75 9/.6 DN x M x 75 9/ 5. DN x M x 75 9/ 6. DN x M x 75 9/ 7. DN x M x 75 9/6 9.0 DN x M x 75 9/7 0. DN x M x 75 9/9. DN x M x 75 9/0. DN x M x 0 9/ 8.6 DN x M x 0 9/. DN x M x 0 9/ 7.0 MaxiFit Plus Available End Ring and Adaptor Body/Centre Sleeve Ductile Iron to BS EN 56:997 Symbol EN GJS-50-0 EPDM compound Grade E to BS EN 68-:996, Type WA, WC Nitrile compound to Grade G BS EN 68:00, Type G Tee Bolts/Bolts Steel to BS EN ISO 898-:009 Property Class.8 Bolt Torque/Spanner Bolt torque 55-65Nm, Spanner size A/F 9mm Nuts Steel to BS EN 90:00 Grade Washers Stainless Steel to BS 9:Part : 98 Grade 0S5 Standard Viking Johnson MaxiFit 8
8 MaxiStep Reducing Couplings L A Working Pressure = 6bar (water) T Ai B Reducing Coupling Maximum Gap Nom Size Size Range Small End Large End Overall Length Sleeve Length x Thickness Diameter Bolts Mould No. No.-Dia x Length Min Max Min Max Ai B L (A) x (T) Min Max Small End Large End 50/ x M x 00 9/ 9/.5 50/ x M x 00 9/ 9/.9 65/ x M x 00 9/ 9/. 80/ x M x 00 9/ 9/.8 00/ x M x 0 9/ 9/6 6. 5/ x M x 0 9/6 9/ / x M x 0 9/7 9/ / x M x 0 9/9 9/ / x M x 0 9/0 9/. 5/ x M x 0 9/ 9/.7 (kg) End Ring and Adaptor Body/Centre Sleeve Ductile Iron to BS EN 56:997 Symbol EN GJS-50-0 EPDM compound Grade E to BS EN 68-:996, Type WA, WC Nitrile compound to Grade G BS EN 68:00, Type G Tee Bolts/Bolts Steel to BS EN ISO 898-:009 Property Class.8 Bolt Torque/Spanner Bolt torque 55-65Nm, Spanner size A/F 9mm Nuts Steel to BS EN 90:00 Grade Washers Stainless Steel to BS 9:Part : 98 Grade 0S5 Standard 9 Viking Johnson MaxiFit Telephone: + (0)6
9 MaxiDaptor Flange Adaptors A L Working Pressure = 6bar (water) M Maximum Flange S T Maximum Gap Flange Adaptor Nom Size Size Range Diameter Bores Overall Length Sleeve Length x Thickness Flange Drilling Min Max M S L (A) x (T) Min Max Bolts No.-Dia x Length Mould No. (kg) MaxiFit Plus Available x x.5 50 PN0:6,.5" BS0 Table ADE, " ANSI5 60 PN0:6, 65 PN0:6, 80 PN0:6, " BS0 Table ADE,.5" ANSI5, " ANSI5 80 AS9 CD, 80 AS087 E M x 5 9/ M x 5 9/ x.5 80 PN0:6, "ANSI5,.5" BS0 Table AD,.5" BS0 Table E M x 5 9/ x.5 00 PN 0:6, " BS0 Table AD, " BS0 Table E, " AWWA C07 D, 00 AS9 CD, 00 AS087 E M x 5 9/ x PN0:6, 50 PN0:6 5" BS0 Table A, 5" BS0 Table DE, 6" BS0 Table A, 6" BS0 Table D, 6" BS0 Table E, 6" AWWA C07 D, 5 AS9 CD, 50 AS9 CD, 5 AS087 E, 50 AS087 E M x 5 9/ x PN0:6, 6" BS0 Table A, 6" BS0 Table D, 6" AWWA, C07 D, 50 AS087 E, 50 AS9 CD, M x 5 9/ x PN0:6, 8" BS0 Table AD, 8" AWWA C07 D, 00 AS9 CD, 00 AS087 E M x 5 9/ x PN0:6, 8" BS0 Table AD, 8" AWWA C07 D, 00 AS9 CD M x 5 9/ x PN0:6, 50 AS087 E M x 5 9/ x PN0:6, 50 AS087 E M x 5 9/ x PN0:6, " BS0 Table D, 00 AS9 CD M x 5 9/.8 End Ring and Adaptor Body/Centre Sleeve Ductile Iron to BS EN 56:997 Symbol EN GJS-50-0 EPDM compound Grade E to BS EN 68-:996, Type WA, WC Nitrile compound to Grade G BS EN 68:00, Type G Tee Bolts/Bolts Steel to BS EN ISO 898-:009 Property Class.8 Bolt Torque/Spanner Bolt torque 55-65Nm, Spanner size A/F 9mm Nuts Steel to BS EN 90:00 Grade Washers Stainless Steel to BS 9:Part : 98 Grade 0S5 Standard Viking Johnson MaxiFit 0
10 United Kingdom - Lancashire Hodder Aqueduct MaxiStep Reducing Coupling - DN700 Project Relining & Cleaning Scheme - The 8 mile Hodder Aqueduct was originally constructed in 95 by Flyde Water Board to supply water to Blackpool from Stocks reservoir. Client United Utilities Viking Johnson MaxiFit Telephone: + (0)6
11 MaxiFit Large Diameter Product Design Benefits Designed for repairs or connection of pipes ranging over DN00 to DN700. Simple to Fit All Large Diameter MaxiFit, MaxiStep & MaxiDaptor products (DN50 DN600) have a long sleeve length as standard; this is a major benefit to the installer, allowing for greater cutting tolerances and a greater pipe insertion depth sealing beyond corrosion damaged pipe ends to create a safe and permanent repair. MaxiCap & MaxiThread End Cap Product Design Benefits Designed for testing and blanking off a pipe end, although the assembly must have suitable external support to prevent movement under pressure. Alternatively, the MaxiCap provides a connection between a plain ended and a threaded pipe. Dual Purpose The MaxiCap end cap fits inside the end ring to the MaxiFit and can be drilled and tapped to form an outlet (up to depending on size). Enables Testing On-Site Converts product to cap end for testing and blanking off (Although the assembly must have suitable external support to prevent movement under pressure). Connects to Threaded Pipe The MaxiThread threaded end cap is designed to provide a connection between plain-ended and threaded pipe. Outlets are available with,.5 and.5 BSP threads. It is constructed with a MaxiFit coupling body with one standard end ring and one threaded end ring. Viking Johnson MaxiFit
12 MaxiFit Large Diameter Couplings = Sleeve = End Ring = = Bolts, Nuts & Washer Working Pressure = 6bar (water) Coupling OD Range Dimensions Min Max End Ring Diameter A Mould No. Bolts No.-Dia x Length M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x /9 -M x M x M x (kg) Sleeve Rolled Steel to BS EN 005-:00 Grade S75 End Ring Rolled Steel to BS EN 005-:00 Grade S75 EPDM Grade E to BS EN Type WA WRAS Listed Bolt Torque / Spanner Bolt torque Nm / Spanner size - A/F 9mm Bolts, Nuts & Washer Bolts - Steel to BS EN ISO 898-:009 Property Class.8 Nuts - Steel to BS EN 90:00 Grade Washer - Stainless Steel to BS 9:Part :98 Grade 0 S5 Coating Sleeve & End Ring = Rilsan Nylon to WIS -5-0 Part Bolts & Nuts = Sheraplex to WIS -5-0 Viking Johnson MaxiFit Telephone: + (0)6
13 MaxiStep Large Diameter Expanded Sleeve Stepped Couplings = Sleeve = End Ring = = Bolts, Nuts & Washer Working Pressure = 6bar (water) Expanded Sleeve Stepped Coupling OD Range Mould No. Dimensions Bolts Small End Large End No.-Dia x Length End Ring Diameter Small End Large End Min Max Min Max Small End A Large End B M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x M x /6 05/5 6-M x Make Up Ring Sleeve Mild Steel to BS EN 005-:00 Grade S75 Rolled Steel to BS EN 005-:00 Grade S75 End Ring Rolled Steel to BS EN 005-:00 Grade S75 EPDM Grade E to BS EN Type WA WRAS Listed Bolt Torque / Spanner Bolt torque Nm / Spanner size - A/F 9mm Bolts, Nuts & Washer Bolts - Steel to BS EN ISO 898-:009 Property Class.8 Nuts - Steel to BS EN 90:00 Grade Washer - Stainless Steel to BS 9:Part :98 Grade 0 S5 Coating Sleeve & End Ring = Rilsan Nylon to WIS -5-0 Part Bolts & Nuts = Sheraplex to WIS -5-0 (kg) Viking Johnson MaxiFit
14 MaxiStep Large Diameter Make Up Ring Stepped Couplings Working Pressure = 6bar (water) = Make Up Ring Sleeve = End Ring = = Stud, Nut & Washer Make Up Ring Stepped Couplings Small End OD Range Mould Studs Dimensions Large End Min Max Min Max Small End Large End Small End No.-Dia x Length Large End No.-Dia x Length Overall Diameter B Overall Length L M x 5 8-M x M x 5 8-M x M x 5 8-M x M x 5 8-M x M x 5 0-M x M x 5 8-M x M x 05 8-M x M x 05 8-M x M x 05 8-M x M x 05 -M x M x 05 8-M x M x 05 0-M x M x 05 0-M x M x 05 8-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 0-M x M x 05 0-M x M x 05 0-M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x M x 05 -M x /9 -M x 05 -M x M x 05 -M x Make Up Ring Sleeve Mild Steel to BS EN 005-:00 Grade S75 Rolled Steel to BS EN 005-:00 Grade S75 End Ring Rolled Steel to BS EN 005-:00 Grade S75 EPDM Grade E to BS EN Type WA WRAS Listed Bolt Torque / Spanner Bolt torque Nm / Spanner size - A/F 9mm Bolts, Nuts & Washer Bolts - Steel to BS EN ISO 898-:009 Property Class.8 Nuts - Steel to BS EN 90:00 Grade Washer - Stainless Steel to BS 9:Part :98 Grade 0 S5 Coating Sleeve & End Ring = Rilsan Nylon to WIS -5-0 Part Bolts & Nuts = Sheraplex to WIS -5-0 (Kg) 5 Viking Johnson MaxiFit Telephone: + (0)6
15 MaxiDaptor Large Diameter Flange Adaptor PN0 TYPE TYPE TYPE = Make Up Ring Sleeve = End Ring = = Stud, Nut & Washer Working Pressure = 6bar (water) Flange Adaptor PN0 OD Range Flange Details Min Max Flange Diameter Flange Bore Flange Thickness Sleeve Length Overall Length Mould Nom. Drilling Type OD S T A L No. Studs No.-Dia x Length PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x Min Max (kg) Flange Adaptor Body Mild Steel to BS EN 005-:00 Grade S75 End Ring Rolled Steel to BS EN 005-:00 Grade S75 EPDM Grade E to BS EN Type WA WRAS Listed Bolt Torque / Spanner Bolt torque Nm / Spanner size - A/F 9mm Studs, Nuts & Washer Studs - Steel to BS EN ISO 898-:009 Property Class.8 Nuts - Steel to BS EN 90:00 Grade Washer - Stainless Steel to BS 9:Part :98 Grade 0 S5 Coating Flange Adaptor Body & End Ring = Rilsan Nylon to WIS -5-0 Part Bolts & Nuts = Sheraplex to WIS -5-0 Viking Johnson MaxiFit 6
16 MaxiDaptor Large Diameter Flange Adaptor PN0 TYPE TYPE TYPE = Make Up Ring Sleeve = End Ring = = Stud, Nut & Washer Working Pressure = 6bar (water) Flange Adaptor PN0 OD Range Flange Details Min Max Flange Diameter Flange Bore Flange Thickness Sleeve Length Overall Length Mould Nom. Drilling Type OD S T A L No. Studs No.-Dia x Length PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN /9 0-M x PN M x PN /50 -M x Min Max (kg) Flange Adaptor Body Mild Steel to BS EN 005-:00 Grade S75 End Ring Rolled Steel to BS EN 005-:00 Grade S75 EPDM Grade E to BS EN Type WA WRAS Listed Bolt Torque / Spanner Bolt torque Nm / Spanner size - A/F 9mm Studs, Nuts & Washer Studs - Steel to BS EN ISO 898-:009 Property Class.8 Nuts - Steel to BS EN 90:00 Grade Washer - Stainless Steel to BS 9:Part :98 Grade 0 S5 Coating Flange Adaptor Body & End Ring = Rilsan Nylon to WIS -5-0 Part Bolts & Nuts = Sheraplex to WIS Viking Johnson MaxiFit Telephone: + (0)6
17 MaxiDaptor Large Diameter Flange Adaptor PN6 TYPE TYPE TYPE = Make Up Ring Sleeve = End Ring = = Stud, Nut & Washer Working Pressure = 6bar (water) Flange Adaptor PN6 OD Range Flange Details Min Max Flange Diameter Flange Bore Flange Thickness Sleeve Length Overall Length Mould Nom. Drilling Type OD S T A L No. Studs No.-Dia x Length PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN /0 8-M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x Min Max (kg) Flange Adaptor Body Mild Steel to BS EN 005-:00 Grade S75 End Ring Rolled Steel to BS EN 005-:00 Grade S75 EPDM Grade E to BS EN Type WA WRAS Listed Bolt Torque / Spanner Bolt torque Nm / Spanner size - A/F 9mm Studs, Nuts & Washer Studs - Steel to BS EN ISO 898-:009 Property Class.8 Nuts - Steel to BS EN 90:00 Grade Washer - Stainless Steel to BS 9:Part :98 Grade 0 S5 Coating Flange Adaptor Body & End Ring = Rilsan Nylon to WIS -5-0 Part Bolts & Nuts = Sheraplex to WIS -5-0 Viking Johnson MaxiFit 8
18 MaxiDaptor Large Diameter Flange Adaptor PN6 TYPE TYPE TYPE = Make Up Ring Sleeve = End Ring = = Stud, Nut & Washer Working Pressure = 6bar (water) Flange Adaptor PN6 Continued OD Range Flange Details Min Max Flange Diameter Flange Bore Flange Thickness Sleeve Length Overall Length Mould Nom. Drilling Type OD S T A L No. Studs No.-Dia x Length PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x PN M x Min Max (kg) Flange Adaptor Body Mild Steel to BS EN 005-:00 Grade S75 End Ring Rolled Steel to BS EN 005-:00 Grade S75 EPDM Grade E to BS EN Type WA WRAS Listed Bolt Torque / Spanner Bolt torque Nm / Spanner size - A/F 9mm Studs, Nuts & Washer Studs - Steel to BS EN ISO 898-:009 Property Class.8 Nuts - Steel to BS EN 90:00 Grade Washer - Stainless Steel to BS 9:Part :98 Grade 0 S5 Coating Flange Adaptor Body & End Ring = Rilsan Nylon to WIS -5-0 Part Bolts & Nuts = Sheraplex to WIS Viking Johnson MaxiFit Telephone: + (0)6
19 MaxiDaptor Large Diameter Flange Adaptor ANSI Flange Drilling TYPE TYPE TYPE = Make Up Ring Sleeve = End Ring = = Stud, Nut & Washer Working Pressure = 6bar (water) Flange Adaptor ANSI OD Range Flange Details Min Max Flange Diameter Flange Bore Flange Thickness Sleeve Length Overall Length Mould Nom. Drilling Type OD S T A L No. Studs No.-Dia x Length ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x ANSI M x Min Max (kg) Flange Adaptor Body Mild Steel to BS EN 005-:00 Grade S75 End Ring Rolled Steel to BS EN 005-:00 Grade S75 EPDM Grade E to BS EN Type WA WRAS Listed Bolt Torque / Spanner Bolt torque Nm / Spanner size - A/F 9mm Studs, Nuts & Washer Studs - Steel to BS EN ISO 898-:009 Property Class.8 Nuts - Steel to BS EN 90:00 Grade Washer - Stainless Steel to BS 9:Part :98 Grade 0 S5 Coating Flange Adaptor Body & End Ring = Rilsan Nylon to WIS -5-0 Part Bolts & Nuts = Sheraplex to WIS -5-0 Viking Johnson MaxiFit 0
20 United Kingdom - Canterbury South East Water MaxiFit Couplings - DN500 Project MaxiFit Couplings were used for the emergency repair of a mains pipe in Canterbury. It meant thousands of customers in the city had either no water or low water pressure. Client South East Water Viking Johnson MaxiFit Telephone: + (0)6
21 Distributor details To visit our Video Library go to: WILBURY WAY HITCHIN, HERTFORDSHIRE SG 0UD. UNITED KINGDOM TELEPHONE: + (0)6 fax: + (0)6 info@vikingjohnson.com ISO 00 EMS ISO 900 FM 00 Visit to order your copy of the New Technical Paper 0. Designed and manufactured under quality management systems in accordance with BS EN ISO 900. Environmental Management System accredited to ISO 00. For full terms and conditions, please visit our website. Every effort has been made to ensure that the information contained in this publication is accurate at the time of publishing. Crane Ltd assumes no responsibility or liability for typographical errors DR7676_0_0_V
Universal. Wide Tolerance Range. Mechanical Pipe Fitting Technology PIONEERS IN PIPE SOLUTIONS
Universal MaxiFit Wide Tolerance Range Mechanical Pipe Fitting Technology PIONEERS IN PIPE SOLUTIONS United Kingdom - Canterbury South East Water MaxiFit Couplings - DN500 Project MaxiFit Couplings were
More informationMaxiFit. High Tolerance Mechanical Pipe Fittings. World leaders in pipe joint, repair & flow control products
World leaders in pipe joint, repair & flow control products The Viking Johnson range of MaxiFit universal pipe couplings represents the very latest in mechanical pipe coupling technology. MaxiFit products
More informationQuickFit. Simple. Couplings & Flange Adaptors. Pioneers in pipe solutions. Close Tolerance Preassembled Fittings
Simple QuickFit Couplings & Flange Adaptors Close Tolerance Preassembled Fittings Pioneers in pipe solutions QuickFit Overview Dedicated Couplings & Flange Adaptors The QuickFit coupling range is designed
More informationAquaGrip. Unique. Couplings & Flange Adaptors. For Polyethylene Pipe Connections
Unique AquaGrip Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS, REPAIR & FLOW CONTROL PRODUCTS FOR THE UTILITIES INDUSTRY AquaGrip Overview A High Performance Polyethylene
More informationPre assembled for quick installation. One fitting is able to connect multiple pipes materials. Approvals/Standards BS EN ISO 9001
Technical Guide WM5.1 Viking Johnson Couplers and Flange Adaptors Viking Johnson Maxi Range of universal pipe couplings represents the very latest in mechanical pipe coupling technology. Scan for more
More informationPioneers in pipe solutions NOW. up to DN600
Pioneers in pipe solutions NOW Available up to DN600 Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded pipes Increased diameter range and wide tolerance delivers a reduction
More informationAquaGrip. Unique. Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS
Unique AquaGrip Couplings & Flange Adaptors For Polyethylene Pipe Connections PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS AquaGrip Overview A High Performance Polyethylene Pipe Jointing System The AquaGrip
More informationNEW AL OR COILED PIPES ENHANCED DESIGN VAILABLE IN 280MM DIAMETER EASIER FITTING ON OV NOW A
NEW ENHANCED DESIGN EASIER FITTING ON OVAL OR COILED PIPES NOW AVAILABLE IN 280MM DIAMETER Responsive AquaFast Couplings & Flange Adaptors For Polyethylene & PVC Connections PIPE CONNECTIONS REPAIR FLOW
More informationBespoke. Large Diameter Fittings to Suit any Pipe Specification
Bespoke Large Diameter Fittings to Suit any Specification P I P E C O N N E C T I O N S R E PA I R F L O W C O N T R O L P R O D U C T S Large Diameter Overview Robust, Reliable, Proven Solution for New
More informationThe Simple, yet advanced repair solution
Versatile EasiRange EasiClamp, EasiTap, EasiTee & EasiCollar A Rapid Solution for Pipe Repair & Tapping PIPE CONNECTIONS REPAIR FLOW CONTROL PRODUCTS EasiRange Overview The Simple, yet advanced repair
More informationLarge. Bespoke. Diameter. Fittings to Suit any Pipe Specification
Bespoke Large Fittings to Suit any Specification pipe ONNEIONS, repair & flow control products for the utilities industry Large Overview Robust, Reliable, Proven Solution for New Lay s ustomer Design Liaison
More informationDismantling. Joint Range. Flexible. Fully Restrained Double Flanged Fitting
Flexible ismantling Joint Range Fully Restrained ouble Flanged Fitting pipe ONNETIONS, repair & flow control products for the utilities industry Overview eveloped for omplete Versatility The range was
More informationRANGER FLANGE ADAPTORS
RANGER ADAPTORS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the
More informationTHOMAS. Unifit Premier Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Premier Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe J1 Unifit Premier Series Application Locally
More informationViking Johnson Ultragrip Restraint Couplings
Viking Johnson Ultragrip Restraint Couplings Scan for more information echnical Guide W5.3 high tolerance product range with end restraint. ccommodates various metal and plastic pipe material. 2016 PRESSURE
More informationTHOMAS. Unifit Series. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Unifit Series Universal Pipe Couplings and Flange Adaptors for all Rigid Pipe H1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED BELLVILLE
More informationGeneration. UltraGrip. Next. Optimum Wide Tolerance & Full End Restraint PIONEERS IN PIPE SOLUTIONS
Next Generation UltraGrip Optimum Wide Tolerance & Full End Restraint PIONEERS IN PIPE SOLUTIONS Get to grips with the NEW DN600 Key Benefits Grips and seals on the most corroded pipes Increased diameter
More informationDismantling. Joint Range. Flexible PIONEERS IN PIPE SOLUTIONS. Fully Restrained Double Flanged Fitting
Flexible Dismantling Joint Range Fully Restrained Double d Fitting PIONEERS IN PIPE SOLUTIONS Dismantling Joint Overview Developed for Complete Versatility The Dismantling Joint range was developed to
More informationATLANTIC PLASTICS is a company of. UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors
ATLANTIC PLASTICS is a company of UPE Multi Diameter Wide tolerance Couplings and Flange Adaptors The UPE MultiDiameter range of wide tolerance couplings and flange adaptors can be used for almost any
More informationTHOMAS. G-Flex Install Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS. Fully Rubber Lined Flexible Couplings
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS G-Flex Install Couplings Fully Rubber Lined Flexible Couplings E1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED VAAL DAM - Gauteng
More informationValves, Hydrants & Fittings. Water Valves Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories
Valves, Hydrants & Fittings AVK Water Valves 126-134 Gate Valves / Fire Hydrants / Check Valves / Air Valves / Accessories Gas Valves 135-143 Gate Valves / Drilling Valves / Ball Valves / Accessories Water
More informationTHOMAS. Large Diameter Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Large Diameter Couplings Dedicated Connections For Rigid Large Diameter Pipework F1 COUPLINGS & FLANGE ADAPTORS - NON RESTRAINED
More informationEccentric. Plug Valve Flow Control & Isolation Solved. Versatile PIONEERS IN PIPE SOLUTIONS
Versatile Eccentric Plug Valve Flow Control & Isolation Solved PIONEERS IN PIPE SOLUTIONS Eccentric Plug Valve - Series 601 Overview Flow Control & Isolation Solved Numerous applications Eccentric Plug
More informationTHOMAS. Ultra Saddles & Tees. Tap In Products PIPE PRODUCTS. Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps
THOMAS PIPE PRODUCTS Tap In Products Ultra Saddles & Tees Full Circle Stainless Steel Repair Saddle Clamps and Tee Clamps E1 Ultra Saddles & Tees Overview For a Permanent and Simple Tap In Solution for
More informationRANGER COUPLINGS RANGER COUPLINGS
RANGER COUPINGS RANGER products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. ecause of the
More informationSmith-Blair OMNI Coupling System Advantages:
OMNI Coupling System SmithBlair s OMNI Coupling System utilizes the tremendous tensile strength of ductile iron to your best advantage. Applying the principles of space age technology to engineer the OMNI
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationUNIJOINT is a company of. UNIJOINT Eurocoup Flange Adaptors & Couplings
UNIJOINT is a company of UNIJOINT Eurocoup Flange Adaptors & Couplings UNIJOINT For Challenging Pipe Connections UNIJOINT, established in 1992 in the Netherlands, is a company with a vast experience in
More informationDid You Know...? Underground drainage products are also available from BSS Drainage from the following sources
Did You Know...? Underground drainage products are also available from BSS Drainage from the following sources Polypipe Terrain The comprehensive range of underground drainage offers both rigid and core
More informationREPAMAX. Versatile Stainless Steel Coupling. Versatile Stainless Steel. By Krausz Wide-Range Couplings. Joins as a coupling. Repairs as a clamp.
JOIN REPAIR RESTRAIN REPAMAX Versatile Stainless Steel By Krausz Wide-Range Couplings Joins as a coupling. Repairs as a clamp. Versatile Stainless Steel Coupling REPAMAX Product Information Versatile Stainless
More informationHYMAX VERSA by Krausz Coupling and Repair Solutions
HYMAX VERSA by Krausz Coupling and Repair Solutions HYMAX VERSA. VERSATILE STAINLESS STEEL COUPLING. Krausz HYMAX VERSA products provide a highly versatile stainless steel coupling solution for connecting
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationJCM 101 Universal Clamp Couplings
JCM 1 Universal Clamp Couplings JCM 1 Universal Clamp Coupling - Single Band JCM Universal Clamp Couplings provide a full circumferential seal and wide range for the permanent repair or reconnection of
More informationWide-Range Coupling Solutions
Wide-Range Coupling Solutions HYMAX. CONNECTING THE FUTURE. A revolutionary product that set a new industry standard, the HYMAX* product line has been field-proven in millions of installations world-wide.
More informationThe Number One Choice of Line Stopping Contractors
JCM 0 Line Stop Fittings Take a Look!!! JCM 0 FAMILY OF LINE STOP FITTINGS HAS EPANDED New Plug Option - New Numbering System Whatever your application needs, JCM has it! JCM Industries offers the largest
More informationROMACON COUPLINGS AND FLANGE ADAPTORS
ROMACON COUPLINGS AND FLANGE ADAPTORS Couplings DN mm DN inches Range Romafit Weight kg 50 2 59-73 3,8 65 2,5 72-85 4,3 80 3 88-103 4,5 100 4 108-128 5,6 125 5 132-146 6,8 125 5 139-153 6,9 150 6 159-182
More informationStyle 234 Restrained Flexible Single-Gasket Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date
Victaulic Bolted Split-Sleeve Products (VBSP) Style 234 carbon steel couplings (formerly Depend-O-Lok Air/FluidMaster) are single-arch couplings that are commonly used in buried or exposed steel pipe applications
More informationFord Bolted Flex Couplings. Section M. 5/2008; Web Revision 10/2010
Section M 5/2008; Web Revision 10/2010 Ford Bolted Flex Couplings The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171 FAX: 800-826-3487
More informationROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT. RESTRAINED END CAP page 6-7 NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
ROMAC INDUSTRIES, INC. WIDE RANGE RESTRAINT RESTRAINED COUPLING page 4-5 RESTRAINED END CAP page 6-7 RESTRAINED FLANGED COUPLING coming soon JUNE 2014 UPDATE NOW AVAILABLE FOR HDPE PIPE NO STIFFENER REQUIRED
More informationTalbot Pushfit Service Fittings
Talbot Pushfit Service Fittings Talbot Pushfit Talbot Pushfit fittings are quick and easy to use, with no nuts to loose or leave undone. Simply push the pipe into the fitting, The grip and seal on the
More informationSection 8 AMERICAN. Flanged Pipe
Section 8 AMERICAN Flanged Pipe The principal standards covering Flanged Pipe are ANSI/AWWA C115/A21.15 and ANSI/AWWA C110/A21.10. These and other standards are referenced throughout this Section either
More informationTOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP
TOTAL PIPING SOLUTIONS, INC. TRIPLE-TAP Extended Range Stainless Steel Push Plug Line Stop Tapping Sleeve Technical Specifications Controlled Document: ENGTS-05/120417 December 2017 TRIPLE TAP Extended
More informationP I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS
MALLEABLE P I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS Specification Pipe Threads The machined threads of Crane fittings are supplied to conform with the gauging requirements of BS EN 10226-2 and
More informationHole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
More informationHeavy welded steel outlet half. 3/4-inch NPT test plug. Benefits
622 Tapping Sleeve Recessed cavity for mating to lip on standard tapping valves per MSS SP60. Heavy welded steel outlet half. 3/4-inch NPT test plug. Roll resistant, self-energizing concave wedge gasket.
More informationUNIJOINT is a company of. UNIJOINT Dismantling Joints
UNIJOINT is a company of UNIJOINT Dismantling Joints Essential for straightforward and secure installation Source: ABB Dismantling joints play a decisive role in the design and layout of pipelines and
More informationEccentric. P l u g V a l v e. Versatile PIPE CONNECTIONS, REPAIR & FLOW CONTROL PRODUCTS FOR THE UTILITIES INDUSTRY
Versatile Eccentric P l u g V a l v e Flow Control & Isolation Solved PIPE CONNECTIONS, REPAIR & FLOW CONTROL PRODUCTS FOR THE UTILITIES INDUSTRY Eccentric Plug Valve - Series 601 Overview Flow control
More informationMULTI/JOINT. One size fits and grips all End-load resistant - Flexible DN50 - DN600
MULTI/JOINT One size fits and grips all End-load resistant - Flexible DN50 - DN600 1 MULTI/JOINT FITTINGS large tolerance fittings It means that pipes that can be fitted may have different diameters, with
More informationSteel Fabricated Coupling
Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection
More informationINSERTA VALVE SLEEVE INSERTA VALVE ASSEMBLY. Valve insertion, simplified MATERIAL SPECIFICATIONS MATERIAL SPECIFICATIONS.
MADE IN U.S.A. Valve insertion, simplified 10-12 installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than 2 hours Much
More informationTABLE OF CONTENTS. Pipe Diameter Chart (Reference Only)..50 Extensions 38,40,42,44
TABLE OF CONTENTS Item Page Item Page ANSI/AWWA Compact & Full Body Pipe Fittings: Product Submittals and Installation: Mechanical & Flange Joint C153. 3-9 20U Protective Fusion Bonded Epoxy....5,5 Mechanical
More informationBritish Standard Underground Hydrant Range
AVK UNDERGROUND HYDRANTS British Standard Underground Hydrant Range THE AVK BRITISH STANDARD HYDRANT RANGE AVK are the renowned market leading innovators, manufacturers and suppliers of BS 750 fire hydrants
More informationMACRO HP. NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes. patent number:
ACROMACROMACROMA MACRO HP ROMAC S SECOND GENERATION TWO-BOLT E X T E N D E D R A N G E C O U P L I N G NEW SMALLER SIZES Macro HP is Now Available for 2-12 inch Pipe Sizes patent number: 8448993 BMACROHP
More informationFlexible Couplings. Large Diameter Coupling. Global leaders in flexible couplings, drainage & plumbing systems. Benefits
Flexible Couplings Large Diameter Coupling Flexseal can provide Large Diameter Couplings that are manufactured to order, thereby meeting the specific contractor and site requirements. Large Diameter Couplings
More informationTHOMAS. Low Pressure SS Couplings. Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS
THOMAS Couplings & Flange Adaptors Non Restrained Products PIPE PRODUCTS Low Pressure SS Couplings Couplings for Structured Wall HDPE Pipe & Low Pressure Applications G1 COUPLINGS & FLANGE ADAPTORS - NON
More informationDismantling Joint RESTRAINED DOUBLE FLANGED FITTING EASY TO INSTALL ALLOWS FOR ADJUSTMENT 316 STAINLESS STEEL FASTENERS
WM22 Helden RESTRINE OULE FLNGE FITTING ESY TO INSTLL LLOWS FOR JUSTMENT 316 STINLESS STEEL FSTENERS WM22 Helden eveloped for complete versatility, the range was developed to provide greater versatility
More informationWater, Sewer & Drain Fittings
Why Compact? Compact Joint are manufactured from a high strength, impact resistant ductile iron that offers a great margin of safety against service failures and provides vastly increased resistance to
More information411 Steel Couplings Material Specifications
411 Steel Couplings Material Specifications Gasket Material Specifications STANDARD: Nitrile (Buna-N)-NSF 61 Compounded to produce superior storage and performance characteristics while resisting water,
More informationINFACT CORPORATION WATERWORKS PRODUCTS FLEX ADAPTOR SPECIFICATION S TOLL FREE:
INFACT CORPORATION WATERWORKS PRODUCTS SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com ENGINEERING DATA / PRODUCT CHECKLIST EASY-TO-INSTALL SPACE-SAVING RESTRAINT
More informationtwo pipes. two screws. two minutes 1
two pipes. two screws. two minutes 1 www.teekaycouplings.com Contents Introducing the Teekay Pipe Coupling System... 3 Mechanical and Sealing Concepts... 4 Axilock-S and Axilock... 6 Axilock-FP and Axilock-FP
More informationDUCTILE IRON FITTINGS
APPLICATIONS Water reticulation applications. Potable and non-potable pressure pipelines including rising mains and pump stations Fire service mains Irrigation pressure systems FEATURES High strength and
More informationNOTE: Please ask James Hardie on for delivery timeframes and terms and conditions. STORMWATER PIPES & FITTINGS
Description James Hardie manufactures an extensive range of fittings which are intended to provide maximum flexibility in the design and installation of stormwater drainage systems. Application As an integral
More informationInsertaValve Sleeve. InsertaValve Valve Assembly. Valve Insertion, simplified. Material Specifications. Transmate InsertaValve
Material Specifications Material Specifications Sleeve 10" - 12" installations in cast iron, ductile iron, A/C, PVC C-900 and steel pipe No Loss of Pressure Minimal Water Loss Completion time is less than
More informationh Technical Product Data CC Pressure Pipe Systems
h Technical Product Data CC Pressure Pipe Systems Amiblu Holding GmbH All rights reserved. Publication: 09/2018 This version replaces all previous versions. For all current data please visit our website
More informationSeries 800 AWWA Butterfly Valves
Series 800 AWWA Butterfly Valves Valve and Gate Group A Century of Experience GA valves are known for long term reliability in the most demanding water and wastewater applications. Whether a simple check
More informationNew! NiroTherm. Premium solution for corrosive environments. exclusively from SANHA
NiroTherm New! = Tool Compatibility + Push & Stay + Leak Path Feature exclusively from SANHA Premium solution for corrosive environments Optimal for heating, cooling and compressed air installations high
More informationUNION-TITE DUCTILE IRON C153 COMPACT FITTINGS
Sizes 4"-12" UL Listed for Fire Main Equipment SAMPLE SPECIFICATIONS (Current ANSI/AWWA revisions apply) 4" through 24" Push-On joint ductile iron fittings shall be produced in accordance with all applicable
More informationWorcester 18/19 Series. Modular Multi-Way Ball Valves
Worcester 18/19 Series Modular Multi-Way Ball Valves The Modular Approach To Flexibility As part of Worcester's policy of continuous product development, the modular Series 18/19 multi-way valve has been
More informationATLANTIC PLASTICS is a company of. Gunmetal Service Fittings Data Sheet
ATLANTIC PLASTICS is a company of Gunmetal Service Fittings Data Sheet EBCO - Service Connections The EBCO range of gunmetal service fittings covers a variety of pipe material and sizes. Fittings for steel
More informationTHOMAS. Fabricated Steel Pipe Specials. Pipe Fittings PIPE PRODUCTS. Standard & Socketed Pipe Fittings for All Rigid Pipe Materials
THOMAS PIPE PRODUCTS Pipe Fittings Fabricated Steel Pipe Specials Standard & Socketed Pipe Fittings for All Rigid Pipe Materials B1 PIPE FITTINGS LEPHALALE - Limpopo - South Africa PROJECT Medupe Power
More informationMALLEABLE PIPE FITTINGS
M A L L E A B L E P I P E F I T T I N G S O UR GENI US I S PIPE FIT TI NG S Specification Pipe Threads The machined threads of Crane fittings are supplied to conform with the gauging requirements of BS
More informationHYMAX GRIP Wide-Range Restraint Solutions
HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine
More informationSection N. 09/2017 Web Revision 10/23/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001: Ford Fabricated Steel Products
DQS Inc. THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Section N 09/2017 Web Revision 10/23/2017 Ford Fabricated Steel Products Contents Page Product Numbering System... 3 Information...............................................................
More informationPipe Repair Products. A complete selection for all types of pipe
Pipe Repair Products A complete selection for all types of pipe Mueller Service Saddles Manufactured and tested in accordance with ANSI/AWWA C800 & NSF 61 certified. Mueller service saddles, available
More informationIW Quarter-turn. Keeping the World Flowing. IW Quarter-turn Gear Series. Gearboxes
IW Quarter-turn Gear Series The IW series of quadrant worm operators has been designed with customer stocking in mind, and features a removable steel output sleeve to facilitate bore and keyway machining.
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
More informationHYMAX GRIP by Krausz Restraint Solutions
HYMAX GRIP by Krausz Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. Krausz restraint products combine
More informationPIPE REPAIR PRODUCTS REPAIR CLAMPS
PIPE REPAIR PRODUCTS REPAIR CLAMPS The Standard of Excellence in the Industry 1213 BADGER STREET YORKVILLE, ILLINOIS 60560 (630) 553-0840 (800) 426-4301 FAX (630) 553-0181 www.cascademfg.com 2007-2015
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
More informationFord Service Saddles and Tapping Sleeves
DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast
More informationwith the specific application. Always read and understand the installation
Worldwide Contacts www.tyco-fire.com Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Resilient-Seated Gate Valves are used in Fire Protection Systems for on/off operation.
More information1008 thru 3030 sizes. C Hub Dia. Short No. Std. Hex Capacity. Key u. F Wrench D Steel Qty. Size Install.
TAPER-LOCK ings - Dimensions PT6-3 1008 thru 3030 sizes DIMENSIONS FOR 1008 THRU 3030 TAPER-LOCK BUSHINGS RATINGS (Lb-in) C Hub Dia. F L M Wrench Torque A B D Std. Short Short No. Torque CL 30 Std. Hex
More informationStarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines
Joint Restraint Products StarFlex series 5000 Double-Ball Flexible Expansion Joint for the Protection of Water Wastewater, and Industrial Pipelines INFORMATION StarFlex Flexible Expansion Joints can deflect
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Pressure Sewerage Products Valves Section SPO 01 Last updated Jan 2007 CONTENTS SPO 1-S1 GAS RELEASE VALVE A SPO 1-S2 COMBINATION GAS
More informationcontents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.
contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug
More informationHDPE Pipe. Catalogue
HDPE Pipe Catalogue HDPE PIPE Catalogue Overview Proplastics is a leading supplier of world class plastic pipe systems for water and sewer reticulation to Southern Africa. Proplastics produces a wide range
More informationValves Range YSTF Y-Strainer PN16 Flanged. Applicable Standards. Technical Data. Material Certification
Valves Range YSTF Y-Strainer PN16 Flanged No Component Material 1 Body Ductile iron GGG40 2 Bonnet Ductile iron GGG40 3 Screen SS304 4 Gasket EPDM 5 Washer 140HV 6 Drain Plug KTH330-08 7 Nut Gade 8.8 8
More informationUtilities Catalog. PC-U2008, February, 2008
Utilities Catalog PC-U2008, February, 2008 Tyler Utilities 11910 CR. 492 Tyler, Texas 75706 (800) 527-8478 Union Foundry Company Box 309 Anniston, Alabama 3602 (800) 226-7601 TABLE OF CONTENTS Item Page
More informationGRINNELL Model B302 and Model BN302 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description
Technical Services -00- +-0--0 www.grinnell.com GRINNELL Model B0 and Model BN0 Grooved End Butterfly Valves with Gear Operators or Lever-Lock Operators General Description The GRINNELL Models B0 and BN0
More informationButterfly Valves Eccentric Disc Design: BS 5155
Butterfly Valves Eccentric Disc Design: BS 5155 THE PREFFERED VALVE PARTNER IN INDUSTRY Introduction Ithuba Valves, established in year 2000 as a BEE valve company, has been manufacturing and refurbishing
More informationK81-D FIRE HYDRANT GUARDIAN AWWA C502 NSF YEARS. For Generations CERTIFICATIONS ISO 9001 ISO BS OHSAS
GUARDIAN K81-D FIRE HYDRANT CERTIFICATIONS ISO 9001 ISO 14001 BS OHSAS 18001 AWWA C502 NSF 61 140 YEARS WWW.KENNEDYVALVE.COM C For Generations COMPONENTS AND FEATURES A B C E D F G H J L M K N P Q S R
More informationUniclass L L2123 EPIC J3413. CI/SfB (52.5) If9. Surface drainage for heavy duty traffic applications ACO RoadDrain
Uniclass L7315 + L2123 EPIC J3413 CI/SfB (52.5) If9 Surface drainage for heavy duty traffic applications ACO RoadDrain ACO RoadDrain CHANNEL DRAINS Load Class (BS EN 1433:2002) Optimum solution ACO RoadDrain
More informationFounded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry.
Founded in 1941 The World s Largest Manufacturer and Supplier of Piping Components for the Pneumatic Conveying Industry. COUPLING PRODUCTS Compression Couplings Side-Band Couplings Quickon II Couplers
More information37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
More informationPlast/Joint. The mechanical connection with unique one bolt system for plastic pipes d63 d315
Plast/Joint The mechanical connection with unique one bolt system for plastic pipes d63 d315 Plast/Joint >> Quick and efficient installation due to one bolt system >> Do you encounter repairs at difficult
More informationRESILIENT SEATED GATE VALVE FAF 6200
PRODUCTION STANDARTS DN40 DN800 PN 10-16 Design EN 1171 / EN 1074 Connection Face to Face EN 1092-2 / ISO 7005-2 - Flanged EN 558 Series 15 / DIN 3202 F5 Marking EN 19 Tests EN 12266-1 Corrosion Protection
More informationBS up.v.c PRESSURE PIPE FITTINGS
BS Equal Elbow 90 Faucet Elbow 90 Equal Tee Reducing Tee To solvent weld to pipes at both end. L A B Dia. d (Gram) ½ 1 5mm 16.5 17.4 16.5 21.50mm 20 ¾ 2 0mm 19.5 19.6 18.8 26.90mm 45 1 25m m 25.5 21.9
More information