NEW 7 SERIES. Applied Tier II Engine CRAWLER EXCAVATOR. Optional Equipment. Standard Equipment ROBEX 290LC-7. CUMMINS QSB5.9-C Engine : 159 kw/213 HP

Transcription

1 ROX 90L7 Standard quipment ISO standard cab llweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window Lockable door Hot & cool box ccessory box & shtray omputer ided Power Optimization (New PO) system power mode, 3work mode, user mode uto deceleration & one touch deceleration system uto warm up system uto overheat prevention system Heater(700 kcal/hr, 30000TU/hr) & efroster Self diagnostic system entralized monitoring L display ngine speed lock & rror code Gauges uel level gauge ngine coolant temperature gauge Hyd. oil temperature gauge Warning uel level heck ngine & PU ngine oil pressure ngine coolant temperature Hyd. oil temperature Low battery ir cleaner clogging Indicator Power max. Preheat & ngine warmingup One touch decel Removable clean out screen for oil cooler oor and cab locks, one key Two outside rearview mirrors ully adjustable suspension seat with seat belt Slidable joystick, pilotoperated utomatic swing brake Removable reservoir tank Water separator & uel prefilter, fuel line oom holding system rm holding system ounterweight (00, 11460) mono boom (6.m, 0 6 ) rm (3.0m, 0 ) Track shoes (600mm, 3.6 ) Track rail guard m/m radio and cassette Radio remote switch onsole box tilting system (LH.) Three front working light lectric horn atteries ( x 1V x 160H) attery master switch Starting id(air grid heater) cold weather Optional quipment irconditioner (000kcal/hr, 0000TU/hr) Sun visor for cabin inside uel filler pump (36/min, 9. USgpm) eacon lamp Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Single acting piping kit (breaker, etc) ouble acting piping kit (cramshell, etc) ccumulator, work equipment lowering 1 volt power supply ( converter) lectric. transducer Travel alarm Various optional rms Super short arm (.m, 6 11 ) Short arm (.0m, 8 ) Long arm (3.7m, 1 4 ) Various optional uckets (PS heaped) Standard bucket (1.7m 3, 1.66yd 3 ) Narrow bucket (0.79m 3, 1.03yd 3 ) Narrow bucket (1.03m 3, 1.3yd 3 ) Light duty bucket (1.0m 3, 1.96yd 3 ) Light duty bucket (1.73m 3,.6yd 3 ) Light duty bucket (1.8m 3,.4yd 3 ) Heavy duty bucket (1.07m 3, 1.40yd 3 ) Heavy duty bucket (1.7m 3, 1.66yd 3 ) Heavy duty bucket (1.46m 3, 1.91yd 3 ) Rock bucket (1.16m 3, 1.yd 3 ) abin antivandalism kit abin lights OG(alling object guards, IOS/IS 6) Track shoes Triple grousers shoe (700mm, 8 ) Triple grousers shoe (800mm, 3 ) Triple grousers shoe (900mm, 36 ) Lower frame under cover Pre heating system uel warmer Tool kit Operator suit Special cowling ir vent type side door NW 7 SRIS pplied Tier II ngine Standard and optional equipment may vary. ontact your Hyundai dealer for more information. The machine shown may vary according to International standards. ll US measurment rounded off to nearest pounds or inches. PLS ONTT RWLR XVTOR UMMINS QS.9 ngine : 19 kw/13 HP Operating Weight : 9,300 ~ 33,3 (64,600 ~ 73,440 ) Rev. ucket apacity, PS : 0.79 ~ 1.8 m 3 (1.03 ~.4 yd 3 ) Photo may include optional equipment. HVY INUSTRIS O., LT.

2 HYUNI ONSTRUTION QUIPMNT 0 / 03 uilt for Maximum Power, Performance, Reliability. new chapter in construction equipment has now begun. Making the dream a reality. Photo may include optional equipment.

3 Technology in ab esign THNOLOGY IN SIGN 04 / 0 Operator s omfort is oremost. Wide ab xceeds Industry Standards. Visibility ven more visibility than before, for safer, more efficient operating. xcellent Ventilation Ventilation has been improved by the addition of the larger fresh air intake system, and by providing additional air flow throughout the cab. Sliding front and side windows provide improved ventilation. large sunroof offers upward visibility and additional ventilation. omfortable Operator nvironment The control levers and seat can be adjusted to provide maximum operator comfort. The seat is fully adjustable for optimum operating position, reducing operator fatigue. onsole boxes slide forward and backward for improved accessibility. The proportional pressure controls reduce unnecessary exertion while ensuring precise operation. Large windows allow excellent visibility in all directions. Low noise design The Robex 7 series was designed with low operation noise in mind. Hyundai engineering helps to keep interior and exterior noise levels to a minimum. The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments. n insulated diesel engine compartment with sounddamping material also reduces noise. 1 3 Wide, omfortable Operating Space Steel over Sunroof ial Type ngine Speed Switch and Key Switch

4 Operating nvironment OPRTING NVIRONMNT 06 / 07 Wide, omfortable Operating Space ll the controls are designed and positioned according to the latest ergonomic research. Reinforced pillars have also been added for greater cab rigidity. Remote Radio ontrol and eluxe assette Wide ab with xcellent Visibility The cab is roomy and ergonomically designed with low noise level and good visibility. full view front window and large rear and side windows provide excellent visibility in all directions. Highly Sensitive Joystick and asy ntrance New joystick grips for precise control have been equiped with double switches. (Left: Power boost / One touch deceleration, Right: Horn/Optional) asytoreach ontrol Panels Switches and other essential controls are located near the operator. This helps keep operator movement to a minimum, enhancing control with less operator fatigue. Riseup Wiper and abin Lights Raiseup wiper has enhanced for the better front view. abin Lights enhances safety by brightly lighting the surroundings during night work(optional) The best working conditions in a pleasant environment. Improved Intelligent isplay Instrument Panel is installed in front of RH console box. It is easy to check all critical systems with easytoread indicators. Minimization of Shock and Vibration through ab Mounting System The application of Viscous Mounting to the cabin support provides the operator with a much improved ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases. Smooth Travel Pedal and oot Rests Rear mergency xit Window Rear xit Window is designed with easy exit for operator's safety. entralized control pannel Horn button Option button Remote Radio control Travel lever luster One touch decel button Hour meter Travel pedal ully adjustable suspension seat Safety lever Power boost button Joystick control lever ir onditioner and Heater controller Hot & ool ox The New ab has even more space for the operator. n dditional storage box is located behind operators seat, and it keeps food and beverages cool or hot.

5 dvanced Hydraulic System Increased Higher Performance 08 / 09 VN PO SYSTM NW MO ONTROL SYSTM Track Rail Guide & djusters urable track rail guides keep track links in place. Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing springs. dvanced PO System The dvanced PO(omputer ided Power Optimization) system maintains engine and mutual pump power at optimum levels. Mode selections are designed for various work loads and maintaining high performance while reducing fuel consumption. eatures such as auto deceleration and power boost are included in the system. The system monitors engine speed, coolant temperature, and hydraulic oil temperature. ontained within the system are self diagnostic capabilities which are displayed by error codes on the cluster. Self iagnosis System The PU controller diagnoses problems in the PO system caused by electric and hydraulic malfunctions and displays them on the L monitor of the cluster through error codes. This controller has the capacity to identify 48 distinct types of errors. s the information from this device, such as engine rpm, main pump delivery pressure, battery voltage, hyd. temperature, and the state of all types of electric switches, provides the operator with a much more exact state of machine operating condition. This makes the machine easier to troubleshoot when anything does go wrong. rm low Regeneration System rm flow regeneration valve provides smooth armin operation without cavitation. oom & rm Holding System The Holding valves in the main control valve prevents the boom & arm from dropping over an extended period in neutral position. uto eceleration System When remotecontrol valves are in neutral position more than 4 seconds, PU controller instructs the accel actuator to reduce engine speed to 0rpm. This decreases, fuel consumption and reduced cab noise levels. One Touch ecel System When the one touch decel switch is pressed, PU controller controls the accel actuator to reduce engine speed to 90 rpm. nd then the one touch decel switch is pressed again, the engine speed recovers. Max. low utoff System or precise control and finishing work, the Max. low utoff System reduces pump flow, thus allowing smooth operation. POWR MO H mode: High power S mode: Standard power WORK MO : Heavy duty work : General work : reaker USR MO M mode: Maximum Power U mode: Memorizing Operator s Preferable Power Setting utomatic ngine Overheat Prevention If the engine coolant temperature gets too high, the PU controller lowers the engine speed and cools the engine. nti Restart System The new system protects the starter from restarting during engine operation, even if the operator accidentally turns the start key again. Power boost control System When the power boost system is activated, digging power increases about %. It is especially useful when extra power is temporarily needed, for instance, when digging hard earth and rock, or if the bucket teeth are stopped by a stubborn tree root. utomatic Warmingup System fter the engine is started, if the engine coolant temperature is low, the PU controller increases the engine speed and automatically increases the pump flow rate to warm up the engine more effectively. Pump low ontrol System In neutral position: Pump flow is reduced to a minimum to eliminate power loss. In operation: Maximum pump flow is delivered to the actuator to increase the speed. With movement of the control lever, pump flow is automatically adjusted and the actuator speed can be proportionally controlled. Hydraulic amper in Travel Pedal Improved travel controllability & feeling by shock reducing when starting and stopping. UMMINS QS.9 ngine The six cylinders, turbocharged, 4 cycle, harger air cooled engine is built for power, reliability, economy and low emissions. This engine meets Tieremissions regulations. The efinition of Progress The Quantum System Series.9liter engine combiness fullauthority electronic controls with the reliable performance. The electronics in the QS.9 have been proven in our highhorsepower productsworking in the harshest, most demanding environmentslike dusty, nonstop mining operationswhile meeting emissions regulations worldwide. The QS.9 is the only engine in its class to feature 4valve design with centered injectors and a symmetrical piston bowl. The combination of improved airflow and evenly dispersed fuel results in increased power, improved transient reponse and reduced fuel consumption. Reinforced ucket and ucket Linkage Sealed and adjustable bucket linkage provides less wear of pins and bushes as well as silent operation.the design includes bucket link durability and anti wear characteristics. dditional reinforcement plates on cutting edge section. Reinforced bucket is made with thicker steel and additional lateral plate. Strong and Stable Lower rame Reinforced boxsection frame is all welded, lowstress, highstrength steel. It guarantees safety and resistance against external impact when driving on rough ground and working on wet sites through high tensile strength steel panels, with highly durable upper and lower rollers and track guards. Long undercarriage incoporates heavy duty excavator style components. Xleg type center frame is integrally welded for maximum strength and durability. Powerful and Preciser Swing ontrol Improved shock absorbing characteristics make stopping a precise and smooth action

6 Reliability & Serviceability RLIILITY & SRVIILITY / 11 ull open doors and master key system provide easy access for servicing. Handrails and foot steps are applied for safety Side over with Left & Right Swing Open Type asy access to vital components gives unrestricted view of component allows easy maintenance and repair. urability of structure proven through M(inite lement Method) analysis and long term durability test. Large tool box for extra storage Highly efficient Hydraulic Pump Pump output and Hydraulic tank capacity have been increased. pilot pump has been installed resulting in improved control sensitivity. entralized lectric ontrol ox and asy hange ir leaner ssembly lectric control box and ir cleaner are centralized in one or the same compartment for easy service. asy to maintain engine components The cooling and preheating system are provided for optimum and immediate operation, guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility. Photo may include optional equipment.

7 Specifications ackhoe attachment 1 / 13 Rated flywheel horse power ngine Type S IN Model J199 (gross) J1349 (net) 671/1 (gross) 671/1 (net) Max. torque ore x stroke Piston atteries Starting motor lternator Hydraulic system rives & rakes rive method rive motor Reduction system Max. drawbar pull Max. travel speed(high) / (low) Gradeability Parking brake ummins QS.9 Watercooled, 4 cycle iesel,6ylinders in line, direct injection,turbo charged, charger air cooled and low emission 13 HP (19 kw) at 1900 rpm 197 HP (147 kw) at 1900 rpm 16 PS (19 kw) at 1900 rpm 00 PS (147 kw) at 1900 rpm 94.7 f.m(68 f.ft) at 100 rpm x mm (4 x 4.7 ),880 cc (39 cu in) x 1 V x 160 H 4 V, 4.kW 0 mp Main pump Type Two variable displacement piston pumps Max. flow x60 /min (68.7 US gpm / 7. UK gpm) Subpump for pilot circuit Gear pump rosssensing and fuel saving pump system Hydraulic motors Travel Swing Relief valve setting Implement circuits Travel Power boost (boom, arm, bucket) Swing circuit Pilot circuit Service valve Hydraulic cylinders No. of cylinderbore x rod x stroke ontrol Two speed axial piston motor with brake valve and parking brake xial piston motor with automatic brake 330 f/cm (4690 psi) 330 f/cm (4690 psi) 360 f/cm ( psi) 6 f/cm (3770 psi) 40 f/cm (00 psi) Installed oom: mm ( ) rm: mm ( ) ucket: mm ( ) ully hydrostatic type xial piston motor, inshoe design Planetary reduction gear 7300 f (6000 f). km/hr (3. mph) / 3.1 km/hr (1.9 mph) 3(70 %) multi wet disc Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Pilot control Traveling and steering ngine throttle xternal Lights Two joysticks with one safety lever (LH): Swing and arm, (RH): oom and bucket(iso) Two levers with pedals lectric, ial type Two lights mounted on the boom one under the battery box Shoes Operating weight pressure Type Width mm (in) () f / cm (psi) Triple grouser ouble grouser Swing system Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed oolant & Lubricant capacity (refilling) uel tank ngine coolant ngine oil Swing device inal drive(each) Hydraulic system(including tank) Hydraulic tank Undercarriage enter frame Track frame No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guides on each side 600 (4) 700 (8) 800 (3) 900 (36) 7 (8) R90L7 R90NL7 R90L7 H/ R90L7 R90L7 H/ R90L7 R90L7 H/ R90L7 R90L7 H/ xial piston motor Planetary gear reduction Greasebathed multi wet disc 11.0 rpm liter ,300 (64,600) 9,0 (64,10) 3,140 (70,860) 9,880 (6,870) 3,70 (7,140) 30,460 (67,10) 33,300 (73,4) 31,040 (68,430) 33,3 (73,440) US gal X leg type Pentagonal box type 48 9 UK gal Xleg type center frame is integrally welded with reinforced boxsection track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing spring and sprocket, assembled trak chain with triple grouser shoes. Operating weight (approximate) Operating weight, including 6. m (0 6 ) boom, ( 0 ) arm, PS heaped 1.7 m 3 (1.66 yd 3 ) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment. Major component weight Upperstructure ounterweight oom (with arm cylinder) Operating weight Standard equipment 7,040 (1,0 ),00 (11,460 ),670 (,900 ) 0.6 (7.97) 0. (7.8) 0.6 (8.8) 0.49 (6.97) 0.4 (7.68) 0.44 (6.6) 0.48 (6.83) 0.38 (.40) 0.4 (7.68) uckets PS heaped 0.79 (1.03) 1.03 (1.3) 1.7 (1.66) 1.0 (1.96) 1.73 (.6) 1.8 (.4) 1.07 (1.40) 1.7 (1.66) 1.46 (1.91) 1.16 (1.) 0.79 (1.03) 1.03 (1.3) 1.7 (1.66) 1.0 (1.96) 1.73 (.6) PS heaped m 3 (yd 3 ) 1.8 (.4) apacity m 3 (yd 3 ) : Standard backhoe bucket : Heavyduty : Rock bucketheavy rms heaped 0.70 (0.9) 0.90 (1.18) 1. (1.44) 1.30 (1.70) 1.0 (1.96) 1.60 (.09) 0.9 (1.4) 1. (1.44) 1.8 (1.67) 1.00 (1.0) Without side cutters 890 (3.0) 90 (4.9) 190 (0.8) 1490 (8.7) 1700 (66.9) 1800 (70.9) 60 (4.0) (48.0) 1370 (4.0) 13 (1.6) Width mm (in) With side cutters (39.8) 1 (47.6) 14 (.) 1490 (8.7) 16 (63.4) Weight () 740 (1630) 80 (1870) 960 () 0 (0) 1 (470) 1160 (60) 10 (40) 1130 (490) 160 (780) 160 (780) oom rm 0 (6 11 ) 1.07 (1.40) 1.7 (1.66) 1.46 (1.91) Recommendation mm(ft.in) 60 (0 6 ) 00 (8 ) 300 ( 0 ) 1.16 (1.) (1 4 ) : pplicable for materials with density of,000 / m 3 (3,370 / yd 3 ) or less : pplicable for materials with density of 1,600 / m 3 (,700 / yd 3 ) or less : pplicable for materials with density of 1,0 / m 3 (1,80 / yd 3 ) or less oom and arms are of allwelded, lowstress, fulox section design. 6.m(0 6 ) boom and.m(6 11 ),.0m(8 ), 3.0m( 0 ), 3.7m(1 4 ) arms are available. uckets are allwelded, highstrength steel implements. rm ucket digging force rm crowd force. m (6 11 ) igging force Length Weight S ISO S ISO mm(ft.in) () kn f f kn f f kn f f kn f f 0 (6 11 ) 14 (31) [184] 1700 [18760] 3790 [41370] 19. [09.7] [1380] 43 [47140] [18.1] [18870] [416] Note : rm weight including bucket cylinder and linkage..0 m (8 ) ( 0 ) 3.7 m (1 4 ) 177. [193.6] 180 [1970] [4330] Standard arm 00 (8 ) 1390 (3060) [184] 1700 [18760] 3790 [41370] 19. [09.7] [1380] 43 [47140] [160.] 1000 [16360] [36080] 14.0 [168.0] 1700 [17130] 346 [37760] 300 ( 0 ) 100 (33) [184] 1700 [18760] 3790 [41370] 19. [09.7] [1380] 43 [47140] 13.6 [134.8] 1600 [1] 7780 [303] 18. [140.] 130 [1490] 8880 [31] (1 4 ) 1640 (360) [184] 1700 [18760] 3790 [41370] 19. [09.7] [1380] 43 [47140] 8.9 [118.8] 110 [11] 4470 [6690] [1.0] [1440] 130 [74] Remark [ ]: Power oost

8 boom boom imensions & Working ranges IMNSIONS & WORKING RNGS 14 / 1 imensions R90L7, R90NL7 imensions R90L7 High hassis,, J J G G I K H L I K H L G H Tumbler distance Overall length of crawler clearance of counterweight Tail swing radius Rearend length Overall width of upperstructure Overall height of cab Min. ground clearance Track gauge R90L7 R90NL7 R90L7 R90NL7 mm (ftin) 4030 (13 3 ) 4030 (13 3 ) 4940 (16 ) 1190 (3 11 ) 300 ( 6 ) 3 ( 3 ) 980 (9 9 ) 30 (9 11 ) 00 (1 8 ) 600 (8 6 ) 390 (7 ) I J K L oom length rm length Overall length Overall height of boom Track shoe width Overall width R90L7 R90NL7 0 (6 11 ) 700 (3 1 ) 390 (11 9 ) 600 (4 ) 300 ( 6 ) 990 (9 ) 60 (0 6 ) 00 (8 ) 60 (34 11 ) 3470 (11 ) 700 (8 ) 3300 ( ) 300 ( 0 ) 60 (34 8 ) 390 ( ) 800 (3 ) 3400 (11 ) mm (ftin) (1 4 ) 630 (34 11 ) 300 (11 6 ) 900 (36 ) 300 (11 6 ) G H Tumbler distance Overall length of crawler clearance of counterweight Tail swing radius Rearend length Overall width of upperstructure Overall height of cab Min. ground clearance Track gauge mm (ftin) 4030 (13 3 ) 490 (16 3 ) 100 (4 11 ) 300 ( 6 ) 3 ( 3 ) 980 (9 9 ) 3380 (11 1 ) 76 ( 6 ) 870 (9 ) I J K L oom length rm length Overall length Overall height of boom Track shoe Overall width Type Width 0 (6 11 ) 690 (3 1 ) 3740 (1 3 ) 600 (4 ) 60 (0 6 ) Triple grouser Triple grouser Triple grouser ouble grouser 3470 (11 ) 00 (8 ) 6 (34 ) 390 (11 9 ) 700 (8 ) 370 (11 9 ) 300 ( 0 ) 430 (34 3 ) 330 (11 0 ) 800 (3 ) 3670 (1 0 ) mm (ftin) (1 4 ) 30 (34 7 ) 3 (11 6 ) 7 (8 ) 380 (11 9 ) Working ranges R90L7, R90NL7 Working ranges R90L7 High hassis feet meter meter oom length rm length Max. digging reach Max. digging reach on ground Max. digging depth Max. digging depth (8' level) Max. vertical wall digging depth Max. digging height Max. dumping height Min. swing radius 0 (6 11 ) 00 (3 ) 980 (3 3 ) 6440 (1 1 ) 640 (0 6 ) 6000 (19 8 ) 070 (33 0 ) 6940 ( 9 ) 4380 (14 4 ) 60 (0 6 ) 00 (8 ) 80 (33 7 ) 080 (33 1 ) 6840 ( ) 6630 (1 9 ) 80 (19 ) 1 (33 ) 7030 (3 1 ) 460 (14 0 ) 300 ( 0 ) 80 (3 6 ) 60 (34 ) 700 (4 7 ) 7300 (3 11 ) 64 (1 0 ) 160 (33 4 ) 71 (3 4 ) 430 (13 11 ) mm (ftin) (1 4 ) (37 ) 1 (36 ) 8090 (6 7 ) 790 (6 0 ) 7080 (3 3 ) 360 (34 0 ) 73 (4 0 ) 4140 (13 7 ) feet meter meter oom length rm length Max. digging reach Max. digging reach on ground Max. digging depth Max. digging depth (8' level) Max. vertical wall digging depth Max. digging height Max. dumping height Min. swing radius 0 (6 11 ) 00 (3 ) 970 (3 0 ) 6140 (0 ) 930 (19 ) 700 (18 8 ) 370 (34 0 ) 740 (3 9 ) 4380 (14 4 ) 60 (0 6 ) 00 (8 ) 80 (33 7 ) 00 (3 ) 640 (1 ) 6330 (0 9 ) 60 (18 3 ) 0 (33 6 ) 7170 (3 6 ) 460 (14 0 ) 300 ( 0 ) 790 (3 ) 30 (34 7 ) 7090 (3 3 ) 69 ( 8 ) 6090 (0 0 ) 440 (34 3 ) 7400 (4 3 ) 430 (13 11 ) mm (ftin) (1 4 ) (37 ) (36 7 ) 7790 ( 7 ) 7630 ( 0 ) 6790 ( 3 ) 660 (3 0 ) 76 ( 0 ) 4140 (13 7 ) feet Standard quipment feet Standard quipment

9 Lifting apacities LITING PITIS 16 / 17 Lifting capacities R90L7 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft *1670 *3870 *1670 *3870 *14370 *31680 *18700 *4130 *160 *34440 *14370 *31680 *18700 *4130 *160 *34440 *8180 *18030 *9 *400 *13040 *870 *1390 *3070 *13930 *307 *131 *8900 *11170 *4630 *8180 * *66 *1470 *7890 *17390 *9080 *000 *9870 *1760 * *3 *9690 *1360 Rating overfront *66 * *470 *60 *880 *1960 *630 *14400 *7190 * Rating overside or 360 degree oom: 6. m (0 6 ) rm:.0 m (8 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) apacity Reach *4880 *760 *00 * *63 *139 oom: 6. m (0 6 ) rm: ( 0 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight (7.4) 9.19 (30.) 9.69 (31.) 9.90 (3.) 9.84 (3.3) 9.1 (31.) 8.87 (9.1) 7.8 (.7) t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) 9.0 m (30.0 ft) apacity Reach oom: 6. m (0 6 ) rm: ( 0 ) ucket: 1.7 m 3 PS heaped Shoe : 800mm(3 ) triple grouser with.ton(11,460 ) counterweight 7.m.0ft 6.0m 0.0ft 4.m 1.0ft 3.0m.0ft 1.m.0ft 1.m.0ft 3.0m.0ft 4.m 1.0ft Rating overfront Rating overside or 360 degree oom: 6. m (0 6 ) rm:. m (6 11 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight 1. m (.0 ft) (.0 ft) *390 *9 *300 *18380 *400 *390 *9 *300 *18380 *400 *99 *180 *990 *1140 *9700 *18180 *40080 *17190 *37900 Lifting capacities R90NL7 *99 *180 *990 *1140 *9700 *18180 *40080 *17190 *37900 t max. reach 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) 9.0 m (30.0 ft) apacity Reach *980 *160 *10 *70 *1380 *9940 *1390 *30690 *13440 *9630 *11970 *6390 *980 * *960 *780 *1600 *890 *18940 *90 *0 *000 *00 *1670 *870 *1990 * *49 *80 *390 *11880 *6090 *13430 *6830 *1060 *740 * *49 * *4140 *9130 *4900 *800 *43 * *4460 *4600 *140 *4780 * *980 *13180 *960 t max. reach (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) apacity (9.3) 9.74 (3.0).0 (33.).40 (34.1).3 (34.0).04 (3.9) 9.44 (31.0) 8.48 (7.8) 6.97 (.9) Reach 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft *390 *9 *300 *18380 *400 *390 *9 *300 *18380 *400 *99 *180 *990 *1140 *9700 *18180 *40080 *17190 *37900 *99 *180 *990 *1140 *9700 *18180 *40080 *17190 *37900 *980 *160 *10 *70 *1380 *9940 *1390 *30690 *13440 *9630 *11970 *6390 *980 * *960 *780 *1600 *890 *18940 *90 *0 *000 *00 *1670 *870 *1990 * *49 *80 *390 *11880 *6090 *13430 *6830 * *49 * *4140 *9130 *4900 *800 *43 * *4460 *4600 * *980 *13180 * (9.3) 9.74 (3.0).0 (33.).40 (34.1).3 (34.0).04 (3.9) 9.44 (31.0) 8.48 (7.8) 6.97 (.9) 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft *9700 *1770 *38740 *1410 *30 * *1410 *30 *8940 *197 *11660 *7 *130 *98 *300 *13770 *30360 *17 *800 *330 *770 *8940 * *760 *1700 *6090 *13430 *7040 *10 *870 *1830 *9370 *0660 *00 *090 *1 *90 *9440 *08 *760 *1700 *6090 * *900 *130 *6 *13690 *6800 * *90 *11660 *380 * *6180 * (6.3) 8.90 (9.) 9.4 (30.9) 9.64 (31.6) 9.8 (31.4) 9.3 (30.3) 8.7 (8.1) 7.47 (4.) oom: 6. m (0 6 ) rm: 3.7 m (1 4 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) 9.0 m (30.0 ft) apacity Reach oom: 6. m (0 6 ) rm:.0 m (8 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) apacity Reach 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft *6470 *1460 *93 *030 *6470 *1460 *93 *030 *13490 *9740 *9980 *000 *13490 *9740 *830 *18340 *9980 *10 *000 *4360 *300 *300 *1890 *7 *7 *840 *1760 *8130 *1760 *8130 *1370 *300 *190 *7090 *190 *7090 *1640 *3800 *1640 *3800 *13690 *30180 *1740 *1740 *18940 *18940 *1770 *34700 *34700 *41760 *41760 *810 *830 * NOTS 1. Lifting capacity are based on S J97, ISO 67.. Lifting capacity of the Robex Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. *64 *14130 *780 *173 *900 *19890 *9730 *140 *9880 *1780 *93 *030 *64 * *4160 *9170 *47 *380 *470 *60 *6300 *13890 *7030 * *4160 *9170 *47 * *370 *0 *370 *800 *4740 *40 *440 * *370 * *3930 *8660 *4090 * *780 * The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity (31.7).40 (34.1).83 (3.) 11.0 (36.).97 (36.0).68 (3.0).1 (33.) 9. (30.3) 7.9 (6.0) 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft *1670 *3870 *1670 *3870 *14370 *31680 *18700 *4130 *160 *34440 *14370 * *160 *34440 *8180 *18030 *9 *400 *13040 *870 *1390 *3070 *13930 *307 *131 *8900 *11170 *4630 NOTS 1. Lifting capacity are based on S J97, ISO 67.. Lifting capacity of the Robex Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. *8180 * *66 *1470 *7890 *17390 *9080 *000 *9870 * *9690 * *470 *60 *880 *1960 *630 *14400 *7190 * *4880 *760 *00 * *63 * The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity (7.4) 9.19 (30.) 9.69 (31.8) 9.90 (3.) 9.84 (3.3) 9.1 (31.) 8.87 (9.1) 7.8 (.7)

10 Lifting capacities LITING PITIS 18 / 19 oom: 6. m (0 6 ) rm: ( 0 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) 9.0 m (30.0 ft) apacity Reach oom: 6. m (0 6 ) rm: ( 0 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) 9.0 m (30.0 ft) apacity Reach 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft *99 *180 *990 *1140 *99 *180 *980 *160 *10 *70 *990 *1140 *1380 *9940 *390 *390 *1390 *9 *9 *9700 *9700 *30690 *300 *300 *18180 *40080 *18380 *18380 *17190 *400 *400 * *13440 * *11970 * *960 *780 *1600 *890 *18940 *90 *0 *000 *00 *1670 *870 *1990 * *49 *80 *390 *11880 *6090 *13430 *6830 * *4140 *9130 *4900 *800 *43 * *4460 *4600 * *980 *13180 * (9.3) 9.74 (3.0).0 (33.).40 (34.1).3 (34.0).04 (3.9) 9.44 (31.0) 8.48 (7.8) 6.97 (.9) 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft *680 *10 *0 *600 *680 *10 *0 *600 *137 *3030 *10 *10 *1440 *1440 *13900 *490 *490 *31390 *31390 *30640 *30 *70 *30 *70 *180 *7730 *14780 *380 *14780 *380 *19180 *480 *19180 *480 *1360 *930 *1980 *1980 *160 *160 *110 *4 *4 *3640 *3640 * *6180 *1360 *730 *16600 *8790 *19380 *9670 * *00 * *970 *1430 *8370 *1840 *6180 *1360 *730 * *3300 *780 *4980 *980 * *110 *630 *13730 *690 *130 *700 *1630 *770 *1700 *7360 *1630 *3300 *780 *4980 *980 * * *9 *640 *4340 *970 *490 *80 *9 * *4480 *9880 *4630 * *480 * *60 * (9.9) 9.84 (3.3).6 (33.7).41 (34.).31 (33.8) 9.9 (3.6) 9.9 (30.) 8. (7.1) oom: 6. m (0 6 ) rm: 3.7 m (1 4 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) 9.0 m (30.0 ft) apacity Reach *6470 *1460 *93 *030 *190 *7090 *1740 *34700 *6470 *1460 *93 *030 *190 *7090 *1740 *34700 *13490 *9740 *9980 *000 *300 *7 *1760 *8130 *1640 *3800 *18940 *41760 *13490 *9740 *9980 *000 *300 *7 *1760 *8130 *1640 * *830 *18340 *10 *4360 *1890 *840 *1370 *300 *13690 *30180 *1770 *810 *830 * *64 *14130 *780 *173 *900 *19890 *9730 *140 *9880 *1780 *93 * *4160 *9170 *47 *380 *470 *60 *6300 *13890 *7030 * *4160 * *370 *0 *370 *800 *4740 * *370 * *3930 *8660 *4090 * *780 * (31.7).40 (34.1).83 (3.) 11.0 (36.).97 (36.0).68 (3.0).1 (33.) 9. (30.3) 7.9 (6.0) oom: 6. m (0 6 ) rm: 3.7 m (1 4 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) 9.0 m (30.0 ft) apacity Reach *6990 *14 *1670 *1870 *8370 *1640 *3670 *6990 *14 *1670 *1870 *8370 *1640 *3670 *14870 *3780 *9690 *1360 *660 *300 *1330 *9370 *16990 *37460 *18430 *40630 *14870 *3780 *9690 *1360 *660 *300 *1330 *9370 *16990 *37460 *18430 *40630 *880 *19 *11460 *60 *13 *890 *13780 *30380 *1390 *9960 *1480 *7 *880 *19 *11460 * *6680 *14730 *8090 *17840 *9190 *060 *9800 *16 *9840 *1690 *90 *0060 *6680 * *440 *930 *4830 *60 *60 *1390 *640 *140 *7130 *170 *70 *16640 *730 *16600 *440 *930 *4830 *60 *60 * *680 *9 *39 *860 *4930 *870 *30 * *4790 *60 *680 *9 *39 * *3960 *8730 *4 *9080 *43 * *6 *1370 *790 * (3.3).0 (34.4).89 (3.7) (36.).93 (3.9).60 (34.8) 9.99 (3.8) 9.04 (9.7) 7.61 (.0) Lifting capacities R90L7 (High hassis) Rating overfront Rating overside or 360 degree oom: 6. m (0 6 ) rm:.0 m (8 ) ucket: 1.7 m 3 PS heaped Shoe : 600mm(4 ) triple grouser with.ton(11,460 ) counterweight 7. m.0 ft 0.0 ft 4. m 1.0 ft.0 ft 1. m.0 ft 1. m.0 ft.0 ft 4. m 1.0 ft t max. reach 1. m (.0 ft) (.0 ft) 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) apacity Reach *1300 *7 *1740 *380 *1300 *7 *1740 *380 *930 * *1460 *34080 *1870 *4080 *1480 *3670 *930 * *1460 *34080 *1870 *4080 *1480 *3670 *8660 *19090 *11380 *090 *13300 *930 *140 *30890 *13840 *30 *1870 *8370 *6 *3390 NOTS 1. Lifting capacity are based on S J97, ISO 67.. Lifting capacity of the Robex Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. *8660 *19090 *11380 * *6 *3390 *770 *170 *6830 *1060 *8130 *1790 *960 *04 *9960 *1960 *0 *70 *9 *0970 *770 *170 *6830 * *0 *1170 *990 *13 *660 *14660 *7300 *16090 *7730 *17040 *7780 *1710 *0 * *49 *80 *060 *11160 *40 * *6 *13690 *6300 *13890 *49 * The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 8. (8.0) 9.30 (30.) 9.7 (3.0) 9.91 (3.) 9.80 (3.) 9.4 (30.9) 8.71 (8.6) 7.8 (4.9) oom: 6. m (0 6 ) rm: ( 0 ) ucket: 1.7 m 3 PS heaped Shoe : 800mm(3 ) triple grouser with.ton(11,460 ) counterweight 7.m.0ft 6.0m 0.0ft 4.m 1.0ft 3.0m.0ft 1.m.0ft 1.m.0ft 3.0m.0ft 4.m 1.0ft 1. m (.0 ft) (.0 ft) *10 *4360 *148 *360 *193 *470 *10 *4360 *148 *360 *193 *470 *6870 *110 *80 *660 *1480 *31480 *190 *4370 *1600 *36380 *6870 *110 *80 *660 *1480 *31480 *190 *4370 *1600 *36380 *340 *800 *190 *7760 *1370 *300 *13890 *3060 *130 *9 *1130 *40 *340 *800 *190 * *1130 *40 NOTS 1. Lifting capacity are based on S J97, ISO 67.. Lifting capacity of the Robex Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. t max. reach 4. m (1.0 ft) (0.0 ft) 7. m (.0 ft) 9.0 m (30.0 ft) apacity Reach *6190 *1360 *740 *1660 *8800 *19400 *9670 *130 *00 *090 *970 *1430 *830 *184 *6190 *1360 *740 * *330 *730 *4980 *980 * *110 *630 *13730 *6960 *1340 *7 *1660 *770 *1700 *730 *1600 *330 *730 *4980 *980 * * *90 *6440 *4340 *970 *490 *80 *90 *6440 *4340 *970 *440 *98 *4480 *9880 *4640 *30 *480 *630 *040 *111 *80 *11640 *40 *1 *8 *18 *60 * The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. *4480 * (9.9) 9.8 (3.3).6 (33.7).41 (34.).31 (33.8) 9.9 (3.6) 9.9 (30.) 8.4 (7.0)