High Reach Demolition
|
|
|
- Tyler Harmon
- 5 years ago
- Views:
Transcription
1 abin RISR / LVTIN / TILTIN abin Riser abin levating abin Tilting R0L-7 R30L-7 / R30L-7 R360L-7 R450L-7 / R450L-7 RL-7 / RL-7 R800L-7 5,560 (18 3 ) 4,730 (15 6 ) 7,750 (5 5 ) 3,360 (11 0 ) 5,50 (18 4 ) 5,10 (17 0 ) 4,360 (14 4 ) 1, (4 11 ),000 5,730 (18 10 ) 4,760 (15 7 ) 7,0 (5 1 ) 3,30 (11 1 ) 5,750 (18 10 ) 5,10 (17 1 ) 4,360 (14 4 ) 1, (4 11 ),000 6,000 5,330 (17 6 ) 8,510 (7 11 ) 3,450 (11 4 ) 5,840 (1 ) 5,80 (17 4 ) 4,460 (14 8 ),000,000 6, (0 1 ) 5,380 (17 8 ) 8,30 ( 4 ) 3, 6,70 (0 7 ) 5,330 (17 6 ) 4,510 (14 10 ),000,000 6, (0 1 ) 5,50 (18 1 ) 8,30 ( 4 ) 3,640 (11 11 ) 6,70 (0 7 ) 5,470 (17 11 ) 4,650 (15 3 ),000,000 7,370 (4 ) 4,780 / 5,830 (15 8 ) / (1 ) 8,640 /,60 (8 4 ) / (31 ) 3,850 7,370 (4 ) 5,70 (18 1 ) 4,850 (15 11 ) 50 /,000 (3 1 ) /,000 mm(ft. in) Some of the Photo may include optional equipment. HYUNI ONSTRUTION QUIPMNT R0L-7 / R30L-7 / R30L-7 / R360L-7 R450L-7 / R450L-7 / RL-7 / RL-7 / R800L-7 PLS ONTT Rev 0
2 uilt for Maximum Power, Performance, Reliability. new chapter in construction equipment has now begun. Making the dream a reality. eatures _Reinforced box section with high strength and low alloy steel yields maximum strength to weight ratio. _Large diameter pins and wide joints absorb the strain of big loads. _oom angle sensor and warning device _oom can be divided for the machine to be used for standard excavation purpose.(option) Some of the Photo may include optional equipment.
3 Robex 0L-7 Robex 30L-7 / 7 Specifications _ Robex 0L-7 Specifications _ Robex 30L-7 / /1 (gross) 67 1/1 (net) circuit ummins QS 6.7 X 5 l/min (68.7 US gpm / 57. UK gpm) 7 (16) / 1,00 17 (147) / 1,00 30 (16) / 1,00 00 (147) / 1, () / 1, 107 (4.) x 14(4.) 6, (40) X 1V X 160H 4V, 4.5kw 4V, 50mp with automatic brake 330 kgf/cm (4,60 psi) 360 kgf/cm (4,765 psi) 360 kgf/cm (5,10 psi) 65 kgf/cm (3,770 psi) 35 kgf/cm (48 psi) oom : -140 X 1,465 mm (5.5 X 57.7 ) rm(middle) : X 1,755 mm (5. X 6.1 ) rm(nd) : X 1,150 mm (5.5 X 45.3 ) RIVS & RKS, in-shoe design 7,300 kgf (60,00 lbf) 5. km/hr (3. mph) / 3.1 km/hr (1. mph) ing and steering (LH): and arm, (RH): oom and bucket(iso) ngine throttle lectric, ial type xternal Lights Two lights mounted on the boom one under the battery box motor reduction bearing lubrication brake speed device(each) 10. rpm R0L ,800kg (17,00lb) 8,kg (18,740lb) 4,860kg (10,710lb) Shoes round pressure (4 ) 34,50 (77,050) kgf/cm (psi) 0.67 (.53) (8 ) 35,530 (78,330) 0.58 (8.5) 800 (3 ) 36,110 (7,610) 0.5 (7.3) 00 (36 ) 36,60 (80,80) 0.47 (6.68) 710 (8 ) 36,10 (7,630) 0.5 (8.3) 67 1/1 (gross) 67 1/1 (net) circuit R30L-7 ummins 8.3- R30L-7 ummins QS X 60 l/min (68.7 US gpm / 57. UK gpm) 5 (13) / 1,750 3 (173) / 1, (13) / 1, (173) / 1, (8) / 1, (4.5) X 135(5.3) (506) X 1V X 160H 4V, 7.kw 4V, 50mp with automatic brake 330 kgf/cm (4,60 psi) 330 kgf/cm (4,60 psi) 360 kgf/cm (5,10 psi) 65 kgf/cm (3,770 psi) 35 kgf/cm ( psi) oom : -150 X 1,480mm (5. X 58.3 ) rm(middle) : X 1,755 mm (5. X 6.1 ) rm(nd) : X 1,150 mm (5.5 X 45.3 ) RIVS & RKS 58 (13) / 1, (177) / 1,750 6 (13) / 1, (177) / 1, (830) / 1, 114 (4.5) X 135 (5.3) (506) X 1V X 160H 4V, 7.kw 4V, 50mp, in-shoe design 8, kgf (6,830 lbf) 5.4 km/hr (3.4 mph) / 3. km/hr (.0 mph) ing and steering (LH): and arm, (RH): oom and bucket(iso) ngine throttle lectric, ial type xternal Lights Two lights mounted on the boom one under the battery box motor reduction bearing lubrication brake speed device(each).1 rpm / * / * R30L-7 / ,50kg (18,780lb) 8,kg (1,180lb) 4,860kg (10,710lb) / * * R30L-7 Shoes round pressure (4 ) 36,080 (7,540) kgf/cm (psi) 0.6 (.81) (8 ) 36,680 (80,860) 0.60 (8.53) 800 (3 ) 37,080 (81,750) 0.53 (7.54) 00 (36 ) 37,480 (8,630) 0.48 (6.83) 710 (8 ) 37,560 (8,800) 0.6 (8.8) HIH RH MOLITION _ 04 HIH RH MOLITION _ 05
4 Robex 360L-7 Robex 450L-7 / 7 Specifications _ Robex 360L-7 Specifications _ Robex 450L-7 / /1 (gross) 67 1/1 (net) circuit ummins QSL X88 l/min (76.6 US gpm / 63.8 UK gpm) 6 (11) / 1, (0) / 1, (11) / 1, (0) / 1, (1,070) / 1, 114 (4.5) x 145(5.7) 8.00 (540) X 1V X 160H 4V, 7.kw 4V, 50mp with automatic brake 330 kgf/cm (4,60 psi) 360 kgf/cm (4,765 psi) 360 kgf/cm (5,10 psi) 60 kgf/cm (3, psi) 35 kgf/cm ( psi) oom : -160 X 1, mm (6.3 X 5.1 ) rm(middle) : X 1,81 mm (6.7 X 7 ) rm(nd) : X 1,150 mm (5.5 X 45.3 ) RIVS & RKS, in-shoe design 31,000 kgf (68,3 lbf) 4.8 km/hr (.8 mph) / 3.0 km/hr (.0 mph) ing and steering (LH): and arm, (RH): oom and bucket(iso) ngine throttle lectric, ial type xternal Lights Two lights mounted on the boom one under the battery box motor reduction bearing lubrication brake speed device(each).0 rpm R360L ,840kg (1,40lb) 11,000kg (4,50lb) 6,0kg (13,870lb) Shoes round pressure (4 ) (8 ) 750 (30 ) 800 (3 ) 00 (36 ) (4 ) 43,080 (4,70) 43,480 (5,860) 43,705 (6,350) 43,30 (6,850) 44,380 (7,840) 43,350 (5,570) kgf/cm (psi) 0.77 (10.5) 0.67 (.53) 0.6 (8.8) 0.5 (8.3) 0.53 (7.54) 0.77 (10.5) (8 ) 43,850 (6,670) 0.67 (.53) 67 1/1 (gross) 67 1/1 (net) circuit R450L-7 ummins QSM11- R450L-7 ummins QSM11 X380 l/min (100.4 US gpm / 83.6 UK gpm) 353 (63) / 1, (66) / 1,00 30 (3) / 1,00 30 (3) / 1, (63) / 1,00 36 (66) / 1,00 35 (3) / 1,00 35 (3) / 1, (1,30) / 1, (1,34) / 1, 15 (4.) X 147(5.7) 15 (4.) X 147(5.7) 10,800 (65) 10,800 (65) X 1V X 00H X 1V X 00H 4V, 7.kw 4V, 7.kw 4V, 50mp 4V, 50mp with automatic brake 330 kgf/cm (4,60 psi) 345 kgf/cm (4,10 psi) 360 kgf/cm (5,10 psi) 85 kgf/cm (3,770 psi) 35 kgf/cm ( psi) oom : -170 X 1,570 mm (6.7 X 61.8 ) rm(middle) : X 1,80 mm (7.3 X 71.7 ) rm(nd) : X 1,5 mm (5. X 51.0 ) RIVS & RKS, in-shoe design 37,00 kgf (8,000 lbf) 5.3 km/hr (3.3 mph) / 3. km/hr (.0 mph) ing and steering (LH): and arm, (RH): oom and bucket(iso) ngine throttle lectric, ial type xternal Lights Two lights mounted on the boom one under the battery box motor reduction bearing lubrication brake speed device(each) 10.3 rpm.0 rpm R450L-7 / ,610kg (3,30lb) 14,kg (3,410lb) 8,30kg (1,60lb) Shoes round pressure (4 ) (8 ) 750 (30 ) 800 (3 ) 00 (36 ) (4 ) (8 ) 55,30 (1,110) 55,80 (13,0) 56,10 (13,880) 56,40 (14,540) 56,0 (15,640) 55,30 (1,110) 55,80 (13,0) kgf/cm (psi) 0.6 (13.65) 0.83 (11.80) 0.78 () 0.73 (10.38) 0.66 (.3) 0.6 (13.65) 0.83 (11.80) HIH RH MOLITION _ 06 HIH RH MOLITION _ 07
5 Robex L-7 / 7 Robex 800L-7 Specifications _ Robex L-7 / 7 Specifications _ Robex 800L /1 (gross) 67 1/1 (net) circuit RL-7 RL-7 ummins QSM11- ummins QSM11 X380 l/min (100.4 US gpm / 83.6 UK gpm) with automatic brake 330 kgf/cm (4,60 psi) 345 kgf/cm (4,10 psi) 360 kgf/cm (5,10 psi) 85 kgf/cm (3,770 psi) 35 kgf/cm ( psi) oom : -170 X 1,570 mm (6.7 X 61.8 ) rm(middle) : X 1,80 mm (7.3 X 71.7 ) rm(nd) : X 1,5 mm (5. X 51.0 ) RIVS & RKS 353 (63) / 1, (66) / 1,00 30 (3) / 1,00 30 (3) / 1, (63) / 1,00 36 (66) / 1,00 35 (3) / 1,00 35 (3) / 1, (1,30) / 1, (1,34) / 1, 15 (4.) X 147(5.7) 15 (4.) X 147(5.7) 10,800 (65) 10,800 (65) X 1V X 00H X 1V X 00H 4V, 7.kw 4V, 7.kw 4V, 50mp 4V, 50mp, in-shoe design 38, kgf (8,000 lbf) 5. km/hr (3.3 mph) / 3.3 km/hr (.0 mph) motor reduction bearing lubrication brake speed device(each) 10.0 rpm.0 rpm RL-7 / ,110kg (4,40lb) 15,kg (34,610lb) 8,30kg (1,60lb) Shoes round pressure (4 ) (8 ) 750 (30 ) 800 (3 ) (4 ) (8 ) 58,760 (1,540) 5,300 (130,730) 5,550 (131,80) 5,810 (131,860) 58,760 (1,540) 5,300 (130,730) kgf/cm (psi) 1.01 (14.36) 0.88 (1.51) 0.8 (11.66) 0.77 (10.5) 1.01 (14.36) 0.88 (1.51) 67 1/1 (gross) 67 1/1 (net) circuit ummins QSX15 Variable displacement tandem axis piston pumps X540 l/min (133.1 US gpm / 110. UK gpm) with automatic brake 330 kgf/cm (4,60 psi) 350 kgf/cm (4,80 psi) 360 kgf/cm (5,10 psi) 60 kgf/cm (3, psi) 40 kgf/cm (56 psi) oom : -00 X 1,8 mm (7. X 74.5 ) rm : 1-15 X,50 mm (8.5 X 88.6 ) ucket() : 1-00 X 1,53 mm (7. X 6.7 ) ucket() : 1-15 X 1,53 mm (8.5 X 6.7 ) RIVS & RKS 510 (380) / 1, (366) / 1, (380) / 1, (366) / 1,800 4 (1,744) / 1, 137 (5.3) X 16(6.65) 15,000 (15) 4 X 1V X 00H 4V,.0kw 4V, 100mp, in-shoe design 5,300 kgf (130,730 lbf) 4 km/hr (.5 mph) / 3.6 km/hr (1.6 mph) motor reduction bearing lubrication brake speed device(each) 6.3 rpm The design includes dry tracks, lubricated rollers, idlers, sprockets, hydraulic track adjusters with shock absorbing springs and assembled track-type tractor shoes with triple grousers. R800L ,300kg (57,80lb) 16,kg (36,380lb) 10,380kg (,880lb) Shoes round pressure (8 ) 800 (3 ) 00 (35 ) 86,80(11,410) 87,560(13,040) 88,0(14,650) kgf/cm (psi) 3(16.07) 1.00(14.) 0.8(1.66) ing and steering ngine throttle xternal Lights (LH): and arm, (RH): oom and bucket(iso) lectric, ial type Two lights mounted on the boom one under the battery box ing and steering ngine throttle xternal Lights (LH): and arm, (RH): oom and bucket(iso) lectric, ial type Two lights mounted on the boom one under the battery box HIH RH MOLITION _ 08 HIH RH MOLITION _ 0
6 imensions & Working ranges IMNSIONS WORKIN RNS Shipping Specifications xtension oom H Middle rm nd rm J L I K Shipping Specifications xtension oom Middle rm nd rm H Width I J Width K L Width R0L-7 R30L-7 / R30L-7 R360L-7 R450L-7 / R450L-7 RL-7 / RL-7 3,00 (10 6 ) (4 ) 1,560 (41 ) 3,340 (10 11 ) 6, 3,30 (10 7 ) 5,80 (1 1 ) (3 ) ( 4 ),810 ( 3 ) 1,010 (3 4 ) 5,170 (16 1 ) (3 ) 3,80 (10 ) (4 ) 1,740 (41 10 ) 3,350 (10 1 ) 6,760 ( ) 3,80 (10 ) 5,80 (1 1 ) (3 ) ( 4 ),850 ( 4 ) 1,010 (3 4 ) 5,170 (16 1 ) (3 ) 3,340 (10 11 ) (4 ) 14,080 (46 ) 3, 6,80 ( 7 ) 3,330 (10 11 ) 7,00 (3 0 ) 1,70 (4 ) 1,160 (3 10 ),800 ( ) 1,040 (3 5 ) 7,170 (3 6 ) 1,10 (3 11 ) 3,40 (11 5 ) (4 ) 17,110 (56 ) 3,510 7,840 (5 ) 3,380 (11 1 ),170 (30 1 ) 1,450 (4 ) 1,300 (4 3 ),50 ( 8 ) 80 (3 3 ) 7,80 (6 ) 1,050 (3 5 ) 3,540 (11 7 ) xtended,0 ( 10 ) Retracted (4 ) 17,140 (56 3 ) 3,750 7,870 (5 10 ) 3,50 (11 7 ),170 (30 1 ) 1,450 (4 ) 1,300 (4 3 ),50 ( 8 ) 80 (3 3 ) 7,80 (6 ) 1,050 (3 5 ) R800L-7 4,35 (14 5 ) xtended 3,675 (1 1 ) Retracted (8 ) 0,864 (68 5 ) 6,735 ( 1 ),181 (30 1 ) 3,580 (11 ) 11,670 (38 3 ) 1,14 (6 3 ) 00 ( 11 ) 3,75 (11 5 ) 1,350 (4 5 ) ( 4 ) 11,503 (37 ) 1,80 (4 ) 550 (1 10 ) R0L-7 R30L-7 / R30L-7 R360L-7 R450L-7 / R450L-7 RL-7 / RL-7 mm(ft. in) HIH RH MOLITION _ 10 HIH RH MOLITION _ 11 oom Length Middle rm Length nd rm (Maximum Working Reach) (Maximum Height) 8,00 ( ), (8 6 ) 5,000 (16 5 ) 10,360 (33 1 ) 17,870 (58 8 ) 8,00 ( ), (8 6 ) 5,000 (16 5 ) 10,380 (34 1 ) 17,40 (58 10 ) 10,110 (33 ), (8 6 ) 7,000 ( 1 ) 13,100 (4 1 ) 0,40 (68 8 ) 1,680 (41 7 ),70 (8 11 ) 7,800 (5 7 ) 15,0 (5 6 ) 4,540 (80 6 ) 1,680 (41 7 ),70 (8 11 ) 7,800 (5 7 ) 15,70 (5 5 ) 4,740 (81 ) R800L-7 16,450 (53 1 ) 3, 11,300 (37 1 ) 0,066 (65 10 ) 3,0 (108 0 ) mm(ft. in)
No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type
SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S DIN ummins QSL9 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 267 kw (359 HP) at 1,650 rpm J1349 (net) 257 kw (344 HP)
CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.
SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,
No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type
SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP
No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type
SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084c 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP
Specif ications R125LCR-9A
Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power
HX210S HX210S L A MORE RELIABLE WAY TO REACH YOUR DREAM ENGINE STD OPT
NGIN ST OPT Hyundai 6T-5.9 (HM5.9) HYRULI SYSTM ST OPT 3-power mode, 2-work mode, user mode Variable power control ngine auto idle & INTRIOR ST OPT ISO Standard abin Rise-up type windshield wiper Radio
With Tier 4 Interim Engine installed. hyundai heavy industries
With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
55-7A. Dimensions. Working Ranges. Standard Equipment
Dimensions Unit (mm) Working Ranges Standard Equipment Boom length 3,000 mm(9' 10") Arm length 1,600 mm(5' 3") 1,900 mm(6' 3") A Max. digging reach A' Max. digging reach at ground B Max. digging depth
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed. * Photo may include optional equipment.
STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level Ⅰ) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield
250LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT
Standard Equipment Optional Equipment Robex 250L-7 ISO standard cab ll-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding
STANDARD EQUIPMENT OPTIONAL EQUIPMENT. We build a better future. *Photo may include optional equipment Rev.
We build a better future STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 106 Level I) TOPS(ISO 1117) Centralized monitoring Gauges Fuel level gauge Engine coolant temperature
We build a better future
We build a better future * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include
With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, optimal
NEW 7 SERIES MINI EXCAVATOR
Working ranges A A' Boom length Arm length A Max. digging reach,000 mm(9' 10") 1,600 mm(5' ") 1,900 mm(6' ") 6,150 mm(20' 2") 6,400 mm(21' 0") A' Max. digging reach at ground 6,010 mm(19' 9") 6,270 mm(20'
Dimensions & Working Range
We build a better future Dimensions & Working Range R35Z-9 Dimensions With Tier 4 Engine installed mm (ft.in) A B C D E F Overall width of upper structure Overall width of cab Overall height of cab Tail
Quick coupler Rubber crawler (450 mm, 1 6 ) Narrow bucket (0.14m 3, 0.18yd 3 ) Long arm (2.2m, 7' 3") Tool kit Operator suit
STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 12117-2) FOG(ISO 10262 Level I) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper
Specifications R220LC-9A / R220NLC-9A
Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel
250LC-7 / 250NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 250LC-7 PLEASE CONTACT
Robex 250L-7 Standard Equipment ISO standard cab ll-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window Lockable
NEW 7A SERIES. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT
Standard Equipment Optional Equipment Robex 250LC-7A ISO standard cab All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding
With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more
Isuzu BB-6BG1T 396 CID (6.5 L) 138 HP (103 1,950 rpm 392 lbf ft (532 1,600 rpm
Specifications Engine Electronic engine control, water cooled, 4-cycle diesel, 6 cylinder, turbocharged. Model Displacement Net horsepower Torque 210TL 240TL 290TL 350TL 370TL Isuzu BB-6BG1T 396 CID (6.5
NEW 7 SERIES. Applied Tier II Engine CRAWLER EXCAVATOR. Optional Equipment. Standard Equipment ROBEX 290LC-7. CUMMINS QSB5.9-C Engine : 159 kw/213 HP
ROX 90L7 Standard quipment ISO standard cab llweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window Lockable door
STANDARD EQUIPMENT OPTIONAL EQUIPMENT. *Photo may include optional equipment Rev. 0
STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level I) TOPS(ISO 12117) Centralized monitoring Gauges Fuel level gauge OPTIONAL EQUIPMENT Engine coolant temperature
STANDARD EQUIPMENT MOVING YOU FURTHER OPTIONAL EQUIPMENT HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed
STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front
With Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129 kw (173 HP) at 1,950 rpm Gross Power SAE J1995 / 136 kw (183 HP) at 1,950 rpm Travel Speed
With Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 424 HP (316 kw) at 1,900 rpm Gross Power SAE J1995 / 444 HP (331 kw) at 1,900 rpm Travel Speed
Standard Equipment. We build a better future. With Tier 4 Interim Engine installed. *Photo may include optional equipment.
Standard Equipment We build a better future ISO standard cabin Cabin ROPS(ISO 12117-2) FOPS(ISO 3449) FOG(ISO 10262 Level ) All-weather steel cab with all-around visibility Safety glass windows Rise-up
Tool kit Long Arm (1.35m, 4'5") Heater & Defroster Lever pattern change valve Additional CWT
STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front
Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive
330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier
The print quality of this copy is not an accurate representation of the original.
We build a better future Equipped with Tier 3a engine *Photo may include optional equipment. Pleasure works an operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy
DOOSAN DAEWOO NEW CRAWLER TYPE LOG LOADER EXCAVATOR. SOLAR 225LL Operating Weight (Without Grapple) : 27,450 kg (60,500lb) Rated Engine Power :
DOOSN DEWOO NEW CRWLER TYPE LOG LODER EXCVTOR SOLR 225LL Operating Weight (Without Grapple) : 27,450 kg (60,500lb) Rated Engine Power : DIN 6271,gross 114kw (155ps)/ 2,000rpm DIN 6271,net 110kw (150ps)/
EX5500 BACKHOE ATTACHMENT. Engine Gross Power : 2 x kw (2 x hp) Operating Weight Loading Shovel : kg ( lb) Backhoe only
EX00 BACKHOE ATTACHMENT Bucket assembly with bucket points Weight: 29 200 kg (6 390 lb) Capacity: 29.0 m3 (38.0 yd3; PCSA heaped) Width: 3 900 (12'") BE-Arm assembly Weight: 37 000 kg (81 600 lb) Width:
HX330 L With Tier4 final / Stage Ⅳ Engine installed
ngine STD OPT ummins QSL 9 engine HYDRULI SYSTM Intelligent Power ontrol (IP) 3-power mode, 2-work mode, user mode Variable Power ontrol Pump low ontrol ttachment Mode low ontrol ngine uto Idle ngine uto
CX HYDRAULIC EXCAVATORS PRELIMINARY. CX75 LR specifications. Weight and ground pressure. Electrical system. Engine. Undercarriage.
X HYRULI XVTORS X75 LR X130 LR PRLIMINRY X75 LR specifications ngine Make ISUZU Type U-4L2X Water-cooled, 4-cycle diesel, 4-cylinder in line, direct injection, Turbocharger with air cooled intercooler
PC138US-11 PC210LC-11 PC240LC/NLC-11 Super Long Front Specification. PC360LC-11 Long Reach Specification Super Long Front Specification
PC138US-11 PC210LC-11 PC240LC/NLC-11 Super Long ront Specification PC360LC-11 Long Reach Specification Super Long ront Specification HYRULIC XCVTOR NGIN POWR 72,6 kw / 97,3 HP to 202 kw / 271 HP OPRTING
With Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 230 HP (171 kw) at 1,950 rpm Gross Power SAE J1995 / 242 HP (180 kw) at 1,950 rpm Travel Speed
EX mm (16'5") mm (17'9") mm (5'10") mm (15'11") mm (15'7") mm (17'8") Overall height of cab
EX100 Engine Gross Power... 7 kw (70 HP) Operating... ackhoe: 000 kg (3 0 lb) E-front: 9 000 kg (0 0 lb) Loading Shovel: 111 000 kg ( 00 lb) ackhoe ucket... PCS (1:1) Heaped: 3.0-. m 3 (3.9-.0 yd 3 ) CECE
STANDARD EQUIPMENT OPTIONAL EQUIPMENT
STANDARD EQUIPMENT OPTIONAL EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window
HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment
With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS, INC. Pride at Work Hyundai Heavy Industries
NEW 7 SERIES. Tier II Engine CRAWLER EXCAVATOR ROBEX 320LC-7
ROBEX 320LC-7 Standard Equipment ISO standard cab!all-weather steel cab with all-around visibility!safety glass windows!rise-up type windshield wiper!sliding fold-in front window!sliding side window!lockable
MINI EXCAVATORS 8014/8016/8018/8020 CTS
MINI XVTORS /// TS OPRTIN WIHT: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs) NTT NIN POWR:. kw (9hp) K L H I J STTI IMNSIONS Machine model TS TS TS TS mm (ft-in) mm (ft-in) mm (ft-in) mm (ft-in)
C SERIES COMPACT EXCAVATORS
03 ELECTRICAL Voltage Alternator rating 60 amp 80 amp Battery 1 x 12 V x 45 Ah 420 CCA 1 x 12 V x 58 Ah 680 CCA HYDRAULICS Main s Variable Variable Variable Variable Variable Variable + gear Max. rated
JCB MINI EXCAVATORS 8014 / 8016 / 8018 / 8020
J MINI XVTORS / / / OPRTIN WIHT: NTT NIN POWR: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs). kw (9hp) K L H I J STTI IMNSIONS Machine model mm (ft-in) mm (ft-in) mm (ft-in) mm (ft-in) Sprocket
210LC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 210LC-7 PLEASE CONTACT
Standard quipment Optional quipment Robex 0L7 ISO standard cabin llweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side
CX55BMTS OPERATING WEIGHT. Cab with 165 lb (75 kg) operator, 247 lb (112 kg) bucket, full fuel and standard equipment: 11,312 lb (5 130 kg)
CX55BMTS COMPACT EXCAVATOR TIER 4 FINAL CERTIFIED ENGINE Model Yanmar 4TNV88-C-PYB Tier 4 Final Certified Cylinders 4 Bore/ 3.46 x 3.54 in (88 x 90 mm) Displacement 133.6 in 3 (2.2 L) Fuel injection Direct
We build a better future
We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries
Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT
Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up
7 SERIES MINI EXCAVATOR
Dimensions 1,650 986 Standard Equipment 2,850 2,610 290 6,100 2,100 1,600 1,925 7 SERIES MINI EXCAVATOR ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with
ZAXIS-2 series. HYDRAULIC EXCAVATOR Model Code: ZX10U-2 Engine Rated Power: 9.5 kw (12.8 HP) Operating Weight: kg Backhoe Bucket: 0.
ZXIS-2 series HYDRULI EXVTOR Model ode: ZX10U-2 Engine Rated Power: 9.5 kw (12.8 HP) Operating Weight: 1 110 kg ackhoe ucket: 0.022 m 3 Versatile excavator with adjustable width for efficient use in various
HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (22.8 L/min) Relief pressure psi (3.
CX130 Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct
NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC35MR-3 PC 35MR. Photo may include optional equipment.
NET HORSEPOWER 21.4 kw 29 HP OPERATING WEIGHT 3595 kg 7,909 lb PC 35MR COMPACT HYDRAULIC EXCAVATOR Photo may include optional equipment. C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND Performance and Versatility
MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.
With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving
MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed Rev 0
Standard Equipment ISO standard cabin Cabin ROPS(ISO 3471) FOG(ISO 10262 LevelI) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield
D7G. Track-Type Tractor
D7G Track-Type Tractor Cat 3306 turbocharged engine Net power 149 kw 200 hp Operating weight With 7S blade 20 094 kg 44,300 lb With 7A blade 19 660 kg 43,300 lb Blade capacity 7S blade 4.2 m 3 5.5 yd 3
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES
With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,
HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)
9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...
DAEWOO NEW CRAWLER TYPE EXCAVATOR
D E W O O H Y D R U L I E X V T O R DEWOO NEW RWLER TYPE EXVTOR Operating Weight : 13,900kg (30,00 lb) ucket apacity (PS) : 0.4~0.7m 3 (0.5~0.99cu yd) Rated Engine Power : 10HP / 1,50 rpm 1kw / 1,50 rpm
CX210C HYDRAULIC EXCAVATOR HYDRAULIC SYSTEM HYDRAULIC CONTROLS ENGINE MONITOR SYSTEM ELECTRICAL SYSTEM
CX210C HYDRAULIC EXCAVATOR ENGINE Brand Model Type ISUZU GI-4HK1X 4-stroke engine, water-cooled, 4 cylinder common rail injection system, turbocharged with air-cooled intercooler, with tier 3 emission
325 COMPACT EXCAVATOR SPECIFICATIONS
325 COMPACT EXCAVATOR SPECIFICATIONS F WORKING RANGE D E Standard Arm Long Arm A. Maximum Blade Depth... 16.9" (429 mm)... 16.9" (429 mm) B. Maximum Blade Height... 15.5" (393 mm)... 15.5" (393 mm) C.
Undercarriage. Lubricant and Coolant Capacity. Travel System
MATERIAL HANDLER Operating Weight: 76,49 lbs (8, kg) SAE Net Horsepower: with fan pump 49 HP (69 kw) without fan pump HP (97 kw) Swing Torque: 96,6 lbf-ft. (66. kn m) Engine Isuzu AH-6WGXYSS- Tier turbocharged
With Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed 5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph)
HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (20 L/min) Relief pressure psi (3900 kpa)
9010B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L) Fuel injection... Direct
Short Tail Swing Mini Excavators 45V4-F / 55V4-F / 60V4-F
Short Tail Swing Mini xcavators 45V4-F / 55V4-F / 60V4-F Please read carefully instruction manuals before operating machines, and use them correctly and safely. Please perform periodically check and maintenance
NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR. Photo may include optional equipment.
NET HORSEPOWER 11.2 kw 15 HP OPERATING WEIGHT 1855 kg 4,090 lb PC18MR-3 PC 18MR COMPACT HYDRAULIC EXCAVATOR Photo may include optional equipment. PC18MR-3 C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND Performance
MATERIAL HANDLING MACHINE
Material Handling Machine MTRIL HNDLING MHIN P P L I T I O N & T T H M N T Model ode: ZX210L-3 ngine Rated Power: 122 kw (164 HP) Operating Weight: 23 000-25 000 kg Model ode: ZX250L-3 ngine Rated Power:
CX17BCOMPACT EXCAVATOR
CX17BCOMPACT EXCAVATOR ENGINE Model Mitsubishi L3E-W231KBS Cylinders 3 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling 2.99 in x 2.76 in (76 x 70 mm) 58.1 in 3 (952
MATERIAL HANDLING MACHINE
ZXIS-5 series MTRIL HNLING MHIN P P L I T I O N Model ode ngine Rated Power Operating Weight ZX50L-5 13 kw (177 HP) 7 900-9 000 kg Model ode ngine Rated Power Operating Weight & ZX350L-5 0 kw (71 HP) 38
We build a better future
We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries enters a new chapter in construction
. Four turn signal Switches
ucket Selection uide m 3 (yd 3 ) ucket apacity 7.0 (9.2) 6.5 (8.5) 6.0 (7.8) 5.5 (7.2) 5.0 (6.5) 4.5 (5.9) 4.0 (5.2) 1200 1400 1600 1800 2000 2200 kg/m 3 2000 2500 3000 3500 4000 Material ensity Standard
We build a better future
We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite
Standards. Engine. Hydraulic System. Weights. Service Refill Capacities. Drive. Swing Mechanism. Sound Performance. Track
Engine Engine Model Cat T Diesel Engine Flywheel Power kw hp ISO kw hp SAE J kw hp EEC / kw hp Bore mm. in Stroke mm. in Displacement. L in Gross Power kw hp The C/C L meets US Tier and EU Stage II emissions
With Tier 4 final / Stage III B Engine installed
With Tier 4 final / Stage III B Engine installed *Foto kan optionele uitrusting omvatten. Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed
We build a better future
We build a better future Equipped with Tier Engine *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite technology, provides our customers
HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version
ZAXIS-3 series Short-tail-swing version HYDRAULIC EXCAVATOR Model Code: ZX29U-3 Engine Rated Power: 19.7 kw (26.4 HP) Operating Weight: 3 060-3 230 kg Backhoe Bucket: 0.08 m 3 Advances in Hitachi Design
NET HORSEPOWER 29.5 kw rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb
NET HORSEPOWER 29.5 kw 40 HP @ 2450 rpm OPERATING WEIGHT D21A-8: 3940 kg 8,690 lb D21P-8: 4240 kg 9,350 lb D21A-8 D21P-8 D 21 CRAWLER DOZER Photos may include optional equipment. D21A/P-8 C R A W L E R
ZAXIS-2 series HYDRAULIC EXCAVATOR. Model Code : ZX17U-2 Engine Rated Power : 11.0 kw (15.0 PS) Operating Weight : kg Backhoe Bucket : 0.
ZXIS-2 series HYDRULI EXVTOR Model ode : ZX17U-2 Engine Rated Power : 11.0 kw (15.0 PS) Operating Weight : 1 850 kg ackhoe ucket : 0.044 m 3 Versatile excavator with adjustable width for efficient use
Doosan Infracore DX700LC TECHNICAL DATA
Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)
We build a better future
STNR QUPMNT optional QUPMNT We build a better future SO Standard cabin llweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side
Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)
9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...
DAEWOO NEW CRAWLER TYPE EXCAVATOR
D E W O O H Y D R U L I C E X C V T O R DEWOO NEW CRWLER TYPE EXCVTOR Operating Weight : 33,00 kg (73,000 lb) ucket Capacity(PCS) :.5~.83m 3 (.63~.39cu yd) Rated Engine Power : 45HP/,950rpm 83kw /,950rpm
With Tier 4 final / Stage IV Engine installed
With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 87 kw (116 HP) at 1,950 rpm Gross Power SAE J1995 / 92.7 kw (124 HP) at 1,950 rpm Travel Speed
MONO BOOM / STRAIGHT BOOM DEMOLITION EXCAVATORS PC210LC-11 PC240LC/NLC-11 PC290LC/NLC-11 PC360LC/NLC-11 PC490LC-11 DEMOLITION EXCAVATORS ENGINE POWER
MONO OOM / STRT OOM MOLTON XVTORS P210L-11 P240L/NL-11 P290L/NL-11 P360L/NL-11 P490L-11 MOLTON XVTORS NN POWR 123 kw (165 P) - 270 kw (362 P) OPRTN WT 23.260-48.470 kg TTMNT WT 2.500-6.100 kg Walk-round
ZAXIS-5 series SUPER LONG FRONT. ZX470LCH-5B 270 kw (362 HP) kg. Model Code Engine Rated Power Operating Weight
ZXIS-5 series SUPER LONG FRONT P P L I T I O N & T T H M E N T Model ode Engine Rated Power Operating Weight ZX70LH-5 70 kw (3 HP) 0-50 300 kg SPEIFITIONS ZX70LH-5 TYPE 1 / TYPE 1 / TYPE 0 SUPER LONG FRONT
9.50M BACKHOE LOADER. Net Horsepower 70 kw (95 hp) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3")
9.50M BACKHOE LOADER Net Horsepower 70 kw (95 hp) Operating Weight 8900 kg (19,621 lb) Digging depth, boom retracted 4760 mm (15'7") Digging depth, boom extended 5860 mm (19'3") Safe ROPS/FOPS operator
CRAWLER EXCAVATOR Applied Tier 2 Engine ROBEX 500LC-7 PLEASE CONTACT Rev 7.
Standard Equipment Optional Equipment ROBEX 500LC7 ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding
SUPER LONG FRONT. ZAXIS-5G series Super Long Front A P P L I C A T I O N & A T T A C H M E N T. Model Code Engine Rated Power Operating Weight
ZXIS-5G series Super Long Front SUPER LONG FRONT P P L I T I O N & T T H M E N T Model ode Engine Rated Power Operating Weight 5 kw (1 HP) 00 kg SPEIFITIONS TYPE H15 SUPER LONG FRONT ENGINE Model... Isuzu
Unprecedented precision and ease of operation.
REX130 EXCAVATOR Unprecedented precision and ease of operation. This Rhino excavator is loaded with enhancements that not only increase productivity and uptime, but lower daily operating costs, too. A
We build a better future
STANDARD EQUIPMENT ISO Standard cabin All-weather steel cab with 360 0 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(lh) Lockable door Hot
CX135. Variable displacement axial piston design
CX135 EXCAVATOR TIER III CERTIFIED ENGINE Model Type Isuzu AJ-4JJ1X, Tier III certified 4-stroke, turbocharged Cylinders 4 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling
Doosan Infracore DX225LL TECHNICAL DATA
Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)
HYDRAULIC EXCAVATOR Model Code: ZX48U-3 Engine Rated Power: 28.4 kw (38.1 HP) Operating Weight: kg Backhoe Bucket: 0.
ZAXIS-3 series Short-tail-swing version HYDRAULIC EXCAVATOR Model Code: ZX48U-3 Engine Rated Power: 28.4 kw (38.1 HP) Operating Weight: 4 850-5 010 kg Backhoe Bucket: 0.14 m 3 Advances in Hitachi Design
TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator
Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,
CX36B MINI EXCAVATOR TIER 4 FINAL CERTIFIED
CX36 MN EXCVTOR TER 4 FNL CERTFED ENGNE Model Emissions Certification Fuel Yanmar 3TNV88F-E Tier 4 Final Diesel Cylinders 3 Displacement 100 in 3 (1.6 L) Fuel injection Fuel injection pump Mechanical w/
STANDARD EQUIPMENT MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment.
STNR QUPMNT optional QUPMNT SO Standard cabin O ll-weather steel cab with 60 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(h) ockable door
MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment.
STNR QUPMNT optional QUPMNT SO Standard cabin ll-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window() ockable door
500LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 500LC-7A PLEASE CONTACT
Standard Equipment Optional Equipment ROBEX 500LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding
HYDRAULIC EXCAVATOR. Printed in Japan IP.As CEN
STANDARD EQUIPMENT Alternator, 0 Ampere, 4V Anti-slip plates Auto-decel Automatic engine warm-up system atteries, 1 Ah/ x 1V oom holding valve ROPS cab (ISO 1117-) Corrosion resistor Counterweight Dry
301.7D CR. Mini Hydraulic Excavator
301.7D CR Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Transport Weight with Canopy 1610 kg 3,550 lb Rated Net Power @ 2,200 rpm (ISO 9249) 13.2 kw 17.7 hp Operating