No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

Size: px
Start display at page:

Download "No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type"

Transcription

1 SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP (316 kw) at 1,900 rpm 6271/1 (gross) 450 PS (331 kw) at 1,900 rpm 6271/1 (net) 430 PS (316 kw) at 1,900 rpm 232 kgf m (1.678 lbf ft) at 1,250 rpm Max. torque ore stroke mm ( ) Piston displacement 12,700 cc (775 cu in) atteries 24 V 200 h Starting motor 24 V 6 kw lternator 24 V 100 HYDRULIC SYSTM MIN PUMP Variable displacement tandem axis piston Type pumps Max. flow l/min (100.4 U.S. gpm / 83.6 U.K. gpm) Sub-pump for pilot circuit Gear pump Cross-sensing and fuel saving pump system HYDRULIC MOTORS Two speed axial pistons motor with Travel brake valve and parking brake Swing xial piston motor with automatic brake RLI VLV STTING Implement circuits 330 kgf/cm 2 (4,690 psi) Travel 330 kgf/cm 2 (4,690 psi) Power boost (boom, arm, bucket) 360 kgf/cm 2 (5,120 psi) Swing circuit 285 kgf/cm 2 (4,050 psi) Pilot circuit 40 kgf/cm 2 (569 psi) Service valve Installed HYDRULIC CYLINDRS No. of cylinder bore stroke oom: Ø 170 1,570 mm : Ø 190 1,820 mm ucket: Ø 170 1,370 mm DRIVS & RKS Drive method ully hydrostatic type Drive motor xial piston motor, in-shoe design Reduction system Planetary reduction gear Max. drawbar pull 34,100 kgf (75,180 lbf) Max. travel speed (high / low) 5.3 km/hr (3.29 mph) / 3.3 km/hr (2.05 mph) Gradeability 35 (70%) Parking brake Multi wet disc SWING SYSTM Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed ixed displacement axial piston motor Planetary gear reduction Grease-bathed Multi wet disc 8.6 rpm SRVIC RILL CPCITIS Re-filling liter US gal UK gal uel tank ngine coolant ngine oil Swing device inal drive (each) Hydraulic system (including tank) Hydraulic tank D/dlue UNDRCRRIG The X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing springs and sprockets and a track chain with double or triple grouser shoes. Center frame X - leg type Track frame Pentagonal box type No. of shoes on each side 53 No. of carrier roller on each side 3 No. of track roller on each side 9 No. of rail guard on each side 2 OPRTING WIGHT (PPROXIMT) Operating weight, including 6,250 mm (20 6 ) boom; 3,050 mm (10 0 ) arm; S heaped 1.27 m 3 (1.66 yd 3 ) bucket, lubricant, coolant, full fuel tank, full hydraulic tank and all standard equipments. OPRTING WIGHT Shoes Operating weight pressure Type Width mm (in) kg (lb) kgf/cm 2 (psi) 600 (24 ) HX520 L 5 (115,520) 0.91 (12.94) Triple grouser 700 (28 ) HX520 L 52,920 (116,670) 0.79 (11.23) 800 (32 ) HX520 L 53,180 (117,240) 0.74 (10.52) Double 600 (24 ) HX520 L 52,215 (115,110) 0.91 (12.94) grouser 700 (28 ) HX520 L 52,735 (116,260) 0.78 (11.09) Heavy duty 600 (24 ) HX520 HD 52,580 (115,920) 0.91 (12.94) grouser 700 (28 ) HX520 HD 53,130 (117,130) 0.79 (11.2) CONTROL Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Two joysticks with one safety lever Pilot control (LH): Swing and arm (RH): oom and bucket (ISO) Traveling and steering Two levers with pedals ngine throttle lectric, Dial type 1

2 UCKT SLCTION GUID & DIGGING ORC UCKTS S heaped 1.00 (1.31) 2.20 (2.88) 2.20 (2.88) 1.81 (2.37) 2.70 (3.53) m 3 (yd 3 ) 1.38 (1.8) 2.43 (3.18) 2.43 (3.18) 3.00 (3.92) 2.20 (2.88) 2.79 (3.65) 2.79 (3.65) 2.79 (3.65) 3.20 (4.19) 3.20 (4.19) 3.00 (3.92) S heaped Capacity m 3 (yd 3 ) CC heaped Width mm (in) Weight kg (lb) 6,550 (21 6 ) oom Recommendation mm (ft.in) 7,060 (23 2 ) oom 3,380 (11 1 ) 4,000 9,000 (29 6 ) oom 6,000 (19 8 ) 1.00 (1.31) 0.90 (1.18) 1,030 (41 ) 1,450 (3,200) 1.38 (1.8) 1.24 (1.62) 1,215 (48 ) 1,670 (3,680) 2.20 (2.88) 1.93 (2.52) 1,685 (66 ) 2,030 (4,480) (3.65) 2.47 (3.23) 1,865 (73 ) 2,300 (5,070) (3.92) 2.70 (3.53) 1,985 (78 ) 2,440 (5,380) (2.88) 1.93 (2.52) 1,685 (66 ) 2,320 (5,110) (3.18) 2.11 (2.76) 1,830 (72 ) 2,450 (5,400) (3.65) 2.47 (3.23) 1,865 (73 ) 2,630 (5,800) (4.19) 2.82 (3.69) 2,075 (82 ) 2,870 (6,330) (2.37) 1.50 (1.96) 1,540 (61 ) 2,650 (5,840) (2.88) 1.93 (2.52) 1,685 (66 ) 2,610 (5,750) (3.18) 2.11 (2.76) 1,830 (72 ) 2,730 (6,020) (3.65) 2.47 (3.23) 1,865 (73 ) 2,950 (6,500) (4.19) 2.82 (3.69) 2,075 (82 ) 3,230 (7,120) (3.53) 2.39 (3.13) 1,800 (71 ) 2,770 (6,110) (3.92) 2.76 (3.61) 1,995 (79 ) 3,040 (6,700) - - Heavy duty bucket Rock-Heavy duty bucket : pplicable for materials with density of 2,000 kg /m 3 (3,370 lb/ yd 3 ) or less : pplicable for materials with density of 1,600 kg /m 3 (2,700 lb/ yd 3 ) or less : pplicable for materials with density of 1,100 kg /m 3 (1,850 lb/ yd 3 ) or less TTCHMNT ooms and arms are welded with a low-stress, full-box section design m (21 6 ); 7.06 m (23 2 ) & 9.0 m (29 6 ) ooms and 2.4 m ; 2.9 m ; 3.38 m (11 1 ); 4.0 m & 6.0 m (19 8 ) s are available. DIGGING ORC oom Length Weight Length Weight mm (ft.in) 6,550 (21 6 ) 7,060 (23 2 ) 9,000 (29 6 ) kg (lb) 4,340 (9,570) 4,370 (9,630) 5,130 (11,310) mm (ft.in) 3,380 (11 1 ) 4,000 (13 1 ) 6,000 (19 8 ) kg (lb) 2,430 (5,360) 2,630 (5,800) 2,430 (5,360) 2,630 (5,800) 2,670 (5,890) 2,760 (6,080) 3,290 (7,250) kn [263.2] [263.2] [263.2] [263.2] [263.2] [263.2] kgf [26840] [26840] [26840] [26840] [26840] [26840] lbf [59170] [59170] [59170] [59170] [59170] [59170] kn [306.0] [306.0] [306.0] [306.0] [306.0] [306.0] kgf [31200] [31200] [31200] [31200] [31200] [31200] lbf [68780] [68780] [68780] [68780] [68780] [68780] kn [303.8] [246.1] [303.8] [246.1] [209.7] [187.2] kgf [30980] [25090] [30980] [25090] [21380] [19090] lbf [68300] [55310] [68300] [55310] [47130] [42090] kn [317.7] [256.7] [317.7] [256.7] [218.2] [193.7] kgf [32400] [26180] [32400] [26180] [22250] [19750] lbf [71430] [57720] [71430] [57720] [49050] [43540] Remarks: ucket digging force crowd force S ISO S ISO [ ]: Power oost Note : oom weight includes arm cylinder, piping, and pin weight includes bucket cylinder, linkage, and pin 2

3 DIMNSIONS & WORKING RNG HX520 L DIMNSIONS 6.55 m (21 6 ); 7.06 m (23 2 ) & 9.0 m (29 6 ) OOM and 2.4 m ; 2.9 m ; 3.38 m (11 1 ); 4.09 m (13 1 ) & 6.0 m (19 8 ) RM D (D') I K C G H L M J Unit : mm (ft in) Tumbler distance 4,470 (14 8 ) Overall length of crawler 5,460 (17 11 ) C clearance of counterweight 1,445 (4 9 ) D Tail swing radius 3,940 (12 11 ) D Rear-end length 3,885 (12 9 ) Overall width of upperstructure 2,980 (9 9 ) Overall of cab 3,340 (10 11 ) G Min. ground clearance Track gauge I Overall of guardrail 2,940 (9 8 ) Retracted 9,000 (29 6 ) 3,380 (11 1 ) 4,000 (13 8 ) 6,000 (19 8 ) J Overall length 12,000 11,870 12,510 (39 4 ) (38 11 ) (41 1 ) 12,380 (40 7 ) 12,260 (40 3 ) 12,250 (40 2 ) 14,200 (46 7 ) K Overall of boom 4,190 (13 9 ) 4,070 3,920 3,790 (13 4 ) (12 10 ) (12 5 ) 4,090 (13 5 ) 3,960 (13 0 ) 4,080 (13 5 ) 600 (24 ) 700 (28 ) 750 (30 ) 800 (32 ) xtended 3,540 (11 7 ) 3,640 (11 11 ) 3,690 (12 1 ) 3,740 (12 3 ) Retracted 2,980 (9 10 ) 3,080 (10 1 ) 3,130 (10 3 ) 3,180 (10 5 ) L Track shoe width M Overall width 2,380 3,595 (11 8 ) 7,060 (23 2 ) length 770 (2 6 ) xtended H oom length 6,550 (21 6 ) HX520 L WORKING RNG Unit : mm (ft in) oom length ' ' C 7,060 (23 2 ) 9,000 (29 6 ) length 3,380 (11 1 ) 4,000 (13 1 ) 6,000 (19 8 ) Max. digging reach 10,690 (35 1 ) 11,130 (36 6 ) 11,200 (36 9 ) 11,620 (38 1 ) 12,040 (39 6 ) 12,600 (41 4 ) 16,180 (53 1 ) Max. digging reach on ground 10,430 (34 3 ) 10,870 10,950 11,380 (35 8 ) (35 11 ) (37 4 ) 11,810 (38 9 ) 12,380 (40 7 ) 16,010 (52 6 ) Max. digging depth 6,240 (20 6 ) 6,740 (22 1 ) 7,610 (25 0 ) 8,230 11,870 (27 0 ) (38 11 ) Max. digging depth (8 level) 6,060 6,580 (19 11 ) (21 7 ) 6,460 6,980 7,470 (21 2 ) (22 11 ) (24 6 ) C Max. vertical wall digging depth 4,370 (14 4 ) 5,420 (17 9 ) D Max. digging 10,390 (34 1 ) Max. dumping 7,040 (23 1 ) Min. front swing radius 4,870 4,540 5,160 4,890 4,850 4,710 (16 0 ) (14 11 ) (16 11 ) (16 1 ) (15 11 ) (15 5 ) D 6,550 (21 6 ) 6,630 (21 9 ) 7,130 (23 5 ) 8,110 (26 7 ) 11,770 (38 7 ) 4,650 (15 3 ) 5,660 5,770 6,320 (18 7 ) (18 11 ) (20 9 ) 8,360 (27 5 ) 10,660 (35 0 ) 10,750 (35 3 ) 10,980 (36 0 ) 11,060 (36 3 ) 12,590 (41 4 ) 7,210 (23 8 ) 7,410 (24 4 ) 7,540 (24 9 ) 7,690 7,910 9,410 (25 3 ) (25 11 ) (30 10 ) 11,280 (37 0 ) 6,140 (20 2 ) 8ft 3

4 LITING CPCITY Rating over-front Rating over-side or 360 degrees HX520 L 6.55 m (21 6 ) boom; 2.40 m arm equipped with 0.92 m 3 (S heaped) bucket and 600 mm (24 ) triple grouser shoes. 3.0 m (10 ft) 4.5 m (15 ft) 6.0 m (20 ft) 7.5 m (25 ft) Capacity Reach 6.0 m kg *13290 *13290 * * (20 ft) lb *29290 *29290 * * m kg *19010 *19010 *15250 *15250 * (15 ft) lb *41910 *41910 *33630 *33630 * m kg * * (10 ft) lb * * m kg * * (5 ft) lb * * kg * * * lb * * * m kg *26490 *26490 * * * * (-5 ft) lb *58390 *58390 * * * * m kg *26910 *26910 *21450 *21450 * * (-10 ft) lb *59330 *59330 *47290 *47290 * * m kg *17540 *17540 *10720 * (-15 ft) lb *38660 *38660 *23640 * m (21 6 ) boom; 2.90 m arm equipped with 0.92 m 3 (S heaped) bucket and 600 mm (24 ) triple grouser shoes. Capacity Reach 7.5 m kg *11640 *11640 * (25 ft) lb *25650 *25650 * m kg * * (20 ft) lb * * m kg *17530 *17530 *14570 *14570 * * (15 ft) lb *38640 *38640 *32110 *32110 * * m kg *22060 *22060 * * * (10 ft) lb *48640 *48640 * * * m kg * * * * (5 ft) lb * * * * kg * * * * lb * * * * m kg *24530 *24530 * * * * (-5 ft) lb *54080 *54080 * * * * m kg *29690 *29690 * * * * (-10 ft) lb *65460 *65460 * * * * m kg *19480 *19490 * *10840 * (-15 ft) lb *42950 *42950 * *23900 * Lifting capacity are based on S J1097 and ISO Lifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 4

5 LITING CPCITY Rating over-front Rating over-side or 360 degrees HX520 L 7.06 m (23 2 ) boom; 2.40 m arm equipped with 0.92 m 3 (S heaped) bucket and 600 mm (24 ) triple grouser shoes. 7.5 m kg * * (25 ft) lb * * m kg *13590 *13590 * (20 ft) lb *29970 *29970 * m kg * * * (15 ft) lb * * * m kg * * (10 ft) lb * * m kg * * (5 ft) lb * * kg * lb * m kg * * * (-5 ft) lb * * * m kg *26500 *26500 *21830 *21830 * * * (-10 ft) lb *58420 *58420 *48130 *48130 * * * m kg *18680 *18680 * * (-15 ft) lb *41180 *41180 * * m (23 2 ) boom; 2.90 m arm equipped with 0.92 m 3 (S heaped) bucket and 600 mm (24 ) triple grouser shoes. 7.5 m kg *11360 *11360 * (25 ft) lb *25050 *25050 * m kg * * (20 ft) lb * * m kg *19010 *19010 *15110 *15110 * * (15 ft) lb *41900 *41900 *33310 *33310 * * m kg * * * (10 ft) lb * * * m kg *21570 *21570 * * (5 ft) lb *47560 *47560 * * kg * * lb * * m kg *20350 *20350 * * (-5 ft) lb *44860 *44560 * * m kg *28610 *28610 * * * * (-10 ft) lb *63060 *63060 * * * * m kg *20370 *20370 * * (-15 ft) lb *44710 *44910 * * m (23 2 ) boom; 3.38 m (11 1 ) arm equipped with 0.92 m 3 (S heaped) bucket and 600 mm (24 ) triple grouser shoes. 6.0 m kg *11640 *11640 * * (20 ft) lb *25650 *25650 * * m kg *17410 *17410 *14350 *14350 * * * (15 ft) lb *38390 *38390 *31640 *31640 * * * m kg *22210 *22210 * * * (10 ft) lb *48960 *48960 * * * m kg * * * (5 ft) lb * * * kg * * lb * * m kg *19680 *19680 * * (-5 ft) lb *43390 *43390 * * m kg *25950 *25950 * * * (-10 ft) lb *57200 *57200 * * * m kg *27870 *27870 *21540 *21540 * * (-15 ft) lb *61430 *61430 *47480 *47480 * * Lifting capacity are based on S J1097 and ISO Lifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 5

6 LITING CPCITY Rating over-front Rating over-side or 360 degrees HX520 L 7.06 m (23 2 ) boom; 4.0 m (13 1 ) arm equipped with 0.92 m 3 (S heaped) bucket and 600 mm (24 ) triple grouser shoes. 1.5 m (5 ft) 10.5 m (35 ft) 7.5 m kg * * (25 ft) lb * * m kg * * (20 ft) lb * * m kg * * * * (15 ft) lb * * * * m kg *20300 *20300 * * * * (10 ft) lb *44750 *44750 * * * * m kg * * * (5 ft) lb * * * kg *14190 *14190 * * * lb *31290 *31290 * * * m kg *14900 *14900 *18380 *18380 * * (-5 ft) lb *32850 *32850 *40520 *40520 * * m kg *19020 *19020 *23290 *23290 * * (-10 ft) lb *41940 *41940 *51340 *51340 * * m kg *29320 *29320 * * * (-15 ft) lb *64640 *64640 * * * m kg *19800 *19800 * (-20 ft) lb *43650 *43550 * m (29 6 ) boom; 6.0 m (19 8 ) arm equipped with 0.92 m 3 (S heaped) bucket and 600 mm (24 ) triple grouser shoes. 3.0m (9.8ft) 5.0m (16.3ft) 7.0m (22.9ft) 9.0m (29.4ft) 11.0m (35.9ft) 13.0m (42.5ft) 8.0 m kg * * (26 ft) lb * * m kg * (20 ft) lb * m kg * (13 ft) lb * m kg * * (7 ft) lb * * kg *9910 *9910 * lb *21840 *21840 * m kg *12430 *12430 * (-7 ft) lb *27400 *27400 * m kg *15220 *15220 * (-13 ft) lb *33560 *33560 * m kg *18350 *18350 * (-20 ft) lb *40460 *40460 * m kg *21930 *21930 * (-26 ft) lb *48340 *48340 * m kg *17820 *17820 * * (-33 ft) lb *39280 *39280 * * Lifting capacity are based on S J1097 and ISO Lifting capacity of the ROX series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 6

7 NGIN Scania DC engine HYDRULIC SYSTM Intelligent Power Control (IPC) 3-power mode, 2-work mode, user mode Variable Power Control Pump low Control ttachment Mode low Control ngine uto Idle ngine uto Shutdown Control CIN & INTRIOR ISO Standard cabin Rise-up type windshield wiper Radio / US player Handsfree mobile phone system with US 12 volt power outlet (24V DC to 12V DC converter) lectric horn ll-weather steel cab with 360 visibility Safety glass windows Sliding fold-in front window Sliding side window (LH) Lockable door Hot & cool box Storage compartment & shtray Transparent cabin roof-cover Sun visor Door and cab locks, one key Mechanical suspension seat with heater Pilot-operated slidable joystick Console box adjust system utomatic climate control ir conditioner & heater Defroster Starting id (air grid heater) for cold weather Centralized monitoring 8 LCD display ngine speed or Trip meter/ccel. ngine coolant temperature gauge Max power Low speed/high speed uto idle Overload Check ngine ir cleaner clogging Indicators CO Gauges uel level gauge Hyd. oil temperature gauge uel warmer Warnings Communication error Low battery Clock Cabin lights Cabin front window rain guard Cabin roof-steel cover Seat djustable air suspension seat with heater Cabin OPS/OG (ISO/DIS 10262) Level 2 OPS (alling Object Protective Structure) ISO 3449 Level 2 OG (alling Object Guard) Cabin ROPS (ISO ) ROPS (Roll Over Protective Structure) STD OPT STY attery master switch Rearview camera VM (dvanced round View Monitoring) our front working lights Travel alarm Rear work lamp eacon lamp utomatic swing brake oom holding system holding system Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Three outside rearview mirrors OTHR ooms 6.55 m; m; m; 29 6 s 2.4 m; m; m; m; m; 19 8 Removable clean-out dust net for cooler Removable reservoir tank uel pre-filter with fuel warmer Rain cap Pre-cleaner Self-diagnostics system Hi-mate (Remote Management System) atteries (2 12 V 200 h) uel filler pump (50 l/min) Single-acting piping kit (breaker, etc.) Double-acting piping kit (clamshell, etc.) Rotating Piping Kit Quick coupler piping Quick coupler oom floating control ccumulator for lowering work equipment Pattern change valve (2 patterns) Tool kit UNDRCRRIG Lower frame under cover (dditional) Lower frame under cover (Normal) Track shoes Triple grouser shoes (600 mm; 24 ) Triple grouser shoes (700 mm; 28 ) Triple grouser shoes (750 mm; 30 ) Triple grouser shoes (800 mm; 32 ) Double grouser shoes (600 mm; 24 ) Double grouser shoes (700 mm; 28 ) Heavy duty grouser shoes (600 mm; 24 ) Heavy duty grouser shoes (700 mm; 28 ) Track rail guard ull track rail guard high walker STD = Standard OPT = Optional STD OPT * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include attachments and optional equipment that are not available in your area. * Materials and specifications are subject to change without advance notice. * ll imperial measurements rounded off to the nearest pound or inch. PLS CONTCT N Rev 0

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084c 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP

More information

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S DIN ummins QSL9 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 267 kw (359 HP) at 1,650 rpm J1349 (net) 257 kw (344 HP)

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

Specifications R220LC-9A / R220NLC-9A

Specifications R220LC-9A / R220NLC-9A Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

With Tier 4 Interim Engine installed. hyundai heavy industries

With Tier 4 Interim Engine installed. hyundai heavy industries With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries enters a new chapter in construction

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries

More information

We build a better future

We build a better future We build a better future Equipped with Tier Engine *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite technology, provides our customers

More information

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more

More information

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, optimal

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 424 HP (316 kw) at 1,900 rpm Gross Power SAE J1995 / 444 HP (331 kw) at 1,900 rpm Travel Speed

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129 kw (173 HP) at 1,950 rpm Gross Power SAE J1995 / 136 kw (183 HP) at 1,950 rpm Travel Speed

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 230 HP (171 kw) at 1,950 rpm Gross Power SAE J1995 / 242 HP (180 kw) at 1,950 rpm Travel Speed

More information

The print quality of this copy is not an accurate representation of the original.

The print quality of this copy is not an accurate representation of the original. We build a better future Equipped with Tier 3a engine *Photo may include optional equipment. Pleasure works an operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

Dimensions & Working Range

Dimensions & Working Range We build a better future Dimensions & Working Range R35Z-9 Dimensions With Tier 4 Engine installed mm (ft.in) A B C D E F Overall width of upper structure Overall width of cab Overall height of cab Tail

More information

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

55-7A. Dimensions. Working Ranges. Standard Equipment

55-7A. Dimensions. Working Ranges. Standard Equipment Dimensions Unit (mm) Working Ranges Standard Equipment Boom length 3,000 mm(9' 10") Arm length 1,600 mm(5' 3") 1,900 mm(6' 3") A Max. digging reach A' Max. digging reach at ground B Max. digging depth

More information

7 SERIES MINI EXCAVATOR

7 SERIES MINI EXCAVATOR Dimensions 1,650 986 Standard Equipment 2,850 2,610 290 6,100 2,100 1,600 1,925 7 SERIES MINI EXCAVATOR ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with

More information

*Photo may include optional equipment. Equipped with Tier 3 Engine

*Photo may include optional equipment. Equipped with Tier 3 Engine *Photo may include optional equipment. Equipped with Tier 3 Engine Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy Industries do everything

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed 5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph)

More information

HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed. * Photo may include optional equipment.

HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed. * Photo may include optional equipment. STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level Ⅰ) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield

More information

NEW 7 SERIES MINI EXCAVATOR

NEW 7 SERIES MINI EXCAVATOR Working ranges A A' Boom length Arm length A Max. digging reach,000 mm(9' 10") 1,600 mm(5' ") 1,900 mm(6' ") 6,150 mm(20' 2") 6,400 mm(21' 0") A' Max. digging reach at ground 6,010 mm(19' 9") 6,270 mm(20'

More information

With Tier 4 final / Stage III B Engine installed

With Tier 4 final / Stage III B Engine installed With Tier 4 final / Stage III B Engine installed *Foto kan optionele uitrusting omvatten. Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed

More information

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS, INC. Pride at Work Hyundai Heavy Industries

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 87 kw (116 HP) at 1,950 rpm Gross Power SAE J1995 / 92.7 kw (124 HP) at 1,950 rpm Travel Speed

More information

*Photo may include optional equipment. We build a better future

*Photo may include optional equipment. We build a better future *Photo may include optional equipment. We build a better future Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy Industries do everything we

More information

STANDARD EQUIPMENT MOVING YOU FURTHER OPTIONAL EQUIPMENT HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed

STANDARD EQUIPMENT MOVING YOU FURTHER OPTIONAL EQUIPMENT HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

Tool kit Long Arm (1.35m, 4'5") Heater & Defroster Lever pattern change valve Additional CWT

Tool kit Long Arm (1.35m, 4'5) Heater & Defroster Lever pattern change valve Additional CWT STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1 R55W-7_taal_en 05-09-2005 15:20 Pagina 1 NEW 7 SERIES MINI EXCAVATOR Yanmar 4TNV94L Engine 42kW/57HP Operating weight 5,450 (12,020 ) Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) Photo may include

More information

NEW 7A SERIES. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT

NEW 7A SERIES. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT Standard Equipment Optional Equipment Robex 250LC-7A ISO standard cab All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding

More information

HX210S HX210S L A MORE RELIABLE WAY TO REACH YOUR DREAM ENGINE STD OPT

HX210S HX210S L A MORE RELIABLE WAY TO REACH YOUR DREAM ENGINE STD OPT NGIN ST OPT Hyundai 6T-5.9 (HM5.9) HYRULI SYSTM ST OPT 3-power mode, 2-work mode, user mode Variable power control ngine auto idle & INTRIOR ST OPT ISO Standard abin Rise-up type windshield wiper Radio

More information

Standard Equipment. We build a better future. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

Standard Equipment. We build a better future. With Tier 4 Interim Engine installed. *Photo may include optional equipment. Standard Equipment We build a better future ISO standard cabin Cabin ROPS(ISO 12117-2) FOPS(ISO 3449) FOG(ISO 10262 Level ) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp) ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES MOVING YOU FURTHER *Photo may include optional equipment. 330LC-9A(resized).indd 2 1/11/2013 1:54:28 PM PRIDE AT WORK Hyundai Heavy Industries

More information

EQUIPMENT ENGINE HYDRAULIC SYSTEM

EQUIPMENT ENGINE HYDRAULIC SYSTEM EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2

More information

PC138US-11 PC210LC-11 PC240LC/NLC-11 Super Long Front Specification. PC360LC-11 Long Reach Specification Super Long Front Specification

PC138US-11 PC210LC-11 PC240LC/NLC-11 Super Long Front Specification. PC360LC-11 Long Reach Specification Super Long Front Specification PC138US-11 PC210LC-11 PC240LC/NLC-11 Super Long ront Specification PC360LC-11 Long Reach Specification Super Long ront Specification HYRULIC XCVTOR NGIN POWR 72,6 kw / 97,3 HP to 202 kw / 271 HP OPRTING

More information

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,

More information

Doosan Infracore DX700LC TECHNICAL DATA

Doosan Infracore DX700LC TECHNICAL DATA Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)

More information

Quick coupler Rubber crawler (450 mm, 1 6 ) Narrow bucket (0.14m 3, 0.18yd 3 ) Long arm (2.2m, 7' 3") Tool kit Operator suit

Quick coupler Rubber crawler (450 mm, 1 6 ) Narrow bucket (0.14m 3, 0.18yd 3 ) Long arm (2.2m, 7' 3) Tool kit Operator suit STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 12117-2) FOG(ISO 10262 Level I) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

STANDARD EQUIPMENT OPTIONAL EQUIPMENT STANDARD EQUIPMENT OPTIONAL EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window

More information

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC

More information

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) 925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator

More information

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp) ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC-5 90 kw (121 hp) ZX180LC-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX180LC-5 Manufacturer and Model Isuzu 4JJ1 Non-Road Emissions Standards Certified

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. *Photo may include optional equipment Rev. 0

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. *Photo may include optional equipment Rev. 0 STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level I) TOPS(ISO 12117) Centralized monitoring Gauges Fuel level gauge OPTIONAL EQUIPMENT Engine coolant temperature

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. We build a better future. *Photo may include optional equipment Rev.

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. We build a better future. *Photo may include optional equipment Rev. We build a better future STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 106 Level I) TOPS(ISO 1117) Centralized monitoring Gauges Fuel level gauge Engine coolant temperature

More information

MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed Rev 0

MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed Rev 0 Standard Equipment ISO standard cabin Cabin ROPS(ISO 3471) FOG(ISO 10262 LevelI) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield

More information

We build a better future

We build a better future STANDARD EQUIPMENT ISO Standard cabin All-weather steel cab with 360 0 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(lh) Lockable door Hot

More information

Doosan Infracore DX55W TECHNICAL DATA

Doosan Infracore DX55W TECHNICAL DATA Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE

More information

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m)

CX130C. Swing mechanism. Swing torque 24,400 lb ft (33,000 N m) Length 12 ft 4 in (3.76 m) Track gauge 6 ft 6 in (1.99 m) CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Isuzu AM-4JJ1X, Tier 4 Interim Certified (Cooled EGR) Fuel Type Cylinders Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump 14 Engine Base engine for use in the U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Manufacturer and Model John Deere PowerTech PWX John Deere 4045H Non-Road

More information

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive 330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier

More information

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC kw (150 hp) ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX210/210LC-5 119 kw (150 hp) zx210/210lc-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX210-5 / ZX210LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emission Standards

More information

HX330 L With Tier4 final / Stage Ⅳ Engine installed

HX330 L With Tier4 final / Stage Ⅳ Engine installed ngine STD OPT ummins QSL 9 engine HYDRULI SYSTM Intelligent Power ontrol (IP) 3-power mode, 2-work mode, user mode Variable Power ontrol Pump low ontrol ttachment Mode low ontrol ngine uto Idle ngine uto

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving

More information

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34. 922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,

More information

ZAXIS. 210/210LC-5 n 119 kw (159 hp)

ZAXIS. 210/210LC-5 n 119 kw (159 hp) n 119 kw (159 hp) EnginE Manufacturer and Model... Isuzu 4HK1 Non-Road Emission Standards... certified to IT4 / Stage IIIB emissions Net Rated Power (ISO 9249)... 119 kw (159 hp) @ 1,900 rpm Cylinders...

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 127 kw (171 HP) at 1,800 rpm Gross Power SAE J1995 / 134 kw (180 HP) at 1,800 rpm Travel Speed

More information

Technical specifications

Technical specifications Technical specifications Q Engine Model Doosan DL06K 4-Cycle Water-Cooled, Turbocharged, Coon Rail Direct Injection, Exhaust Gas Recirculation Diesel Particulate Filter (DPF) No. of cylinders 6 Rated power

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129.4 kw (174 HP) at 2,000 rpm Gross Power SAE J1995 / 136.8 kw (183 HP) at 2,000 rpm Travel Speed

More information

HITACHI ZAXIS80SB. engine rated power 39 kw / 52 HP. operating weight ZAXIS80SB : kg ZAXIS80SBLC : kg

HITACHI ZAXIS80SB. engine rated power 39 kw / 52 HP. operating weight ZAXIS80SB : kg ZAXIS80SBLC : kg HITACHI ZAXIS80SB engine rated power 39 kw / 52 HP operating weight ZAXIS80SB : 7 360-8 120 kg ZAXIS80SBLC : 7 440-8 210 kg bucket capacity SAE, PCSA heaped : 0.13-0.33 m 3 CECE heaped : 0.12-0.29 m 3

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler

More information

HYDRAULIC EXCAVATOR HB335/335LC-1 HB365/365LC-1. Preliminary. HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1

HYDRAULIC EXCAVATOR HB335/335LC-1 HB365/365LC-1. Preliminary. HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1 HORSEPOWER Gross: 202 kw 271 HP / 1950 min -1 Net: 189 kw 253 HP / 1950 min -1 H335/335LC-1 H365/365LC-1 Preliminary OPERTING WEIGHT H335-1: 32200-33100 kg H335LC-1: 33500-34500 kg H365-1: 34400-34700

More information

DL250TC TECHNICAL DATA

DL250TC TECHNICAL DATA DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

STANDARD EQUIPMENT OPTIONAL EQUIPMENT STANDARD EQUIPMENT OPTIONAL EQUIPMENT ISO Standard cabin O All-weather steel cab with 360 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(lh)

More information

We build a better future

We build a better future STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp)

ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp) ZAXIS DASH-5 utility-class EXCAVAtORS ZX250lC-5 140 kw (188 hp) ZX250lC-5 ZAXIS DASH-5 utility-class EXCAVAtORS Engine ZX250LC-5 Manufacturer and Model Isuzu 4HKIZXSA-01 Non-Road Emissions Standards EPA

More information

CRAWLER EXCAVATORS EH160 LC. Specifications.

CRAWLER EXCAVATORS EH160 LC. Specifications. CRAWLER EXCAVATORS Specifications EH160 LC www.newhollandconstruction.com EH160 LC MACHINE DIMENSIONS A M C E I F L G H D K J B Standard Arm Optional Arm Arm Length 10 2 (3.10 m) 8 6 (2.60 m) A. Overall

More information

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51 CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349

More information

CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted

CX210C EXCAVATOR. Swing mechanism. Length 14 ft 8 in (4.47 m) Track gauge 7 ft 10 in (2.4 m) Track Grease lubricated / strutted CX210C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED engine Model Fuel Type Cylinders Isuzu AM-4HK1X Tier 4 Interim Certified (Cooled EGR) Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

We build a better future

We build a better future We build a better future * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include

More information

DL250 TECHNICAL DATA

DL250 TECHNICAL DATA DL250 TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment

40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment 40,7 kw / 54,6 Hp at 2.000 rpm 8.330 kg 4.180-4.675 mm DX80R Compact Equipment Doosan DX80R hydraulic excavator: a new model with novel features The new DX80R hydraulic excavator offers additional value

More information

Lubricant and Coolant Capacity

Lubricant and Coolant Capacity Engine Isuzu AI-4HK1X Tier 3 turbocharged diesel engine with electronic fuel control, 153 Net HP (114 kw), 5.2 Liter displacement, 4-cylinder, water-cooled, EGR with cooler, air-toair intercooler, 24-volt

More information

CRAWLER EXCAVATOR SERIES PC600-6

CRAWLER EXCAVATOR SERIES PC600-6 RWLER EXVTOR SERIES P600-6 The machine shown may vary according to territory specifications The P600-6 is a state of the art European made excavator, setting new standards for cycle times, operator comfort,

More information

250LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT

250LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT Standard Equipment Optional Equipment Robex 250L-7 ISO standard cab ll-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding

More information

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade

More information

37,6 kw / 50,4 Hp at rpm kg mm DX60R. Compact Equipment

37,6 kw / 50,4 Hp at rpm kg mm DX60R. Compact Equipment 37,6 kw / 50,4 Hp at 2.200 rpm 5.875 kg 3.725-4.145 mm DX60R Compact Equipment Doosan DX60R hydraulic excavator: a new model with novel features The new DX60R hydraulic excavator offers additional value

More information

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,

More information

Doosan Infracore DX225LL TECHNICAL DATA

Doosan Infracore DX225LL TECHNICAL DATA Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)

More information

ZAXIS-5 series SUPER LONG FRONT. ZX85US-5B 34.1 kw (45.7 HP) kg. Model Code Engine Rated Power Operating Weight

ZAXIS-5 series SUPER LONG FRONT. ZX85US-5B 34.1 kw (45.7 HP) kg. Model Code Engine Rated Power Operating Weight ZAXIS-5 series SUPER LONG FRONT A P P L I C A T I O N & A T T A C H M E N T Model Code Engine Rated Power Operating Weight ZX85US-5B 34.1 kw (45.7 HP) 9 170-9 340 kg SPECIFICATIONS ENGINE Model... Yanmar

More information

290G LC. 147 kw (197 hp)

290G LC. 147 kw (197 hp) 290G LC 147 kw (197 hp) 290G LC Engine 290G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the

More information

CX130C OPERATOR ENVIRONMENT. Sound level ISO6395 inside cab 70 dba Electrical outlet Cab interior light (1) Rear-view camera (1) Air-suspension

CX130C OPERATOR ENVIRONMENT. Sound level ISO6395 inside cab 70 dba Electrical outlet Cab interior light (1) Rear-view camera (1) Air-suspension CX130C EXCAVATOR LONG UNDERCARRIAGE (LC) TIER 4 INTERIM CERTIFIED ENGINE Model Emissions Certification Fuel Isuzu AM-4JJ1X, Cooled EGR Tier 4 Interim Requires ultra low-sulfur fuel B5 biodiesel tolerant

More information

250G LC. 142 kw (191 hp)

250G LC. 142 kw (191 hp) 250G LC 142 kw (191 hp) 250G LC Engine 250G LC Base engine for use in U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Optional engine for use outside the

More information

350 MH. Material Handler

350 MH. Material Handler 0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest

More information

EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED

EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED CX225 MSR EXCAVATOR STANDARD & DOZER BLADE EQUIPPED TIER 3 CERTIFIED ENGINE Model Type Isuzu AI-4HK1X, Tier 3 certified 4-stroke, turbocharged Cylinders 4 Displacement Bore/Stroke Fuel injection Fuel filter

More information

We build a better future

We build a better future STNDRD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin llweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding

More information

EC140C VOLVO EXCAVATOR. 28,110 32,370 lb, 92 hp

EC140C VOLVO EXCAVATOR. 28,110 32,370 lb, 92 hp EC140C VOLVO EXCAVATOR 28,110 32,370 lb, 92 hp SPECIFICATIONS Engine The Volvo diesel engine delivers lower emissions, along with superior performance and fuel efficiency. The EPA Tier 3 compliant engine

More information