Specifications R220LC-9A / R220NLC-9A

Size: px
Start display at page:

Download "Specifications R220LC-9A / R220NLC-9A"

Transcription

1 Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power SAE J1995 (gross) 167 HP (124 kw) / 1,950 rpm J1349 (net) 157 HP (117 kw) / 1,950 rpm DIN 6271/1 (gross) 169 PS (124 kw) / 1,950 rpm 6271/1 (net) 159 PS (117 kw) / 1,950 rpm Max. torque 74.7.m (540.ft) / 1,500 rpm Bore x stroke 107 mm x 124 mm (4.2 x 4.9 ) Piston displacement 6,700 cc (409 in 3 ) Batteries 2 x 12 V x 100 AH Starting motor 24 V; 4.8 kw Alternator 24 V, 95 Amp * This engine meets the EPA (Tier 4 interim) / EU (Stage IIIB) Emission regulation. HYDRAULIC SYSTEM MAIN PUMP Type Two variable displacement axial piston pumps Max. flow 2 x l/min (60.3 US gpm/50.2 UK gpm) Subpump for pilot circuit Gear pump Crosssensing and fuel saving pump system HYDRAULIC MOTORS Travel Twospeed axial piston motor with brake valve and parking brake Swing Axial piston motor with automatic brake RELIEF VALVE SETTING Implement circuits Travel Power boost (boom, arm, bucket) Swing circuit Pilot circuit Service valve HYDRAULIC CYLINDERS No. of cylinderbore x stroke DRIVES & BRAKES 350 /cm 2 (4,978 psi) 350 /cm 2 (4,978 psi) 380 /cm 2 (5,404 psi) 265 /cm 2 (3,769 psi) 40 /cm 2 (568 psi) Installed Boom: 2120 x 1,290 mm (4.7 x 50.8 ) Arm: 1140 x 1,510 mm (5.5 x 59.4 ) Bucket: 1120 x 1,055 mm (4.7 x 41.5 ) Drive method Fully hydrostatic type Drive motor Axial piston motor, inshoe design Reduction system Planetary reduction gear Max. drawbar pull 21,100 (46,500 ) Max. travel speed (high) / (low) 5.7 km/h (3.5 mph) / 3.6 km/h (2.2 mph) Gradeability 35 (70 %) Parking brake Multi wet disc CONTROL Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Pilot control Two joysticks with one safety lever (LH): Swing and arm (RH): Boom and bucket (ISO) SWING SYSTEM Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed Fixed displacement axial piston motor Planetary gear reduction Greasebathed Multi wet disc 10.7 rpm COOLANT & LUBRICANT CAPACITY Refilling liter US gal UK gal Fuel tank Engine coolant Engine oil Swing device Final drive (each) Hydraulic system (including tank) Hydraulic tank UNDERCARRIAGE The Xleg type center frame is integrally welded with reinforced boxsection track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing springs and sprockets, and a track chain with double or triple grouser shoes. Center frame X leg type Track frame Pentagonal box type No. of shoes on each side 49 No. of carrier rollers on each side 2 No. of track rollers on each side 9 No. of rail guards on each side 2 OPERATING WEIGHT (APPROXIMATE) Operating weight, including 5,680 mm (18 8 ) boom, 2,920 mm (9 7 ) arm, SAE heaped 0.92 m 3 (1.20 yd 3 ) bucket, lubricant, coolant, full fuel tank, full hydraulic tank and all standard equipments. MAJOR COMPONENT WEIGHT Upperstructure 5,600 kg (12,350 lb) Boom (with arm cylinder) 1,950 kg (4,300 lb) Arm (with bucket cylinder) 1,095 kg (2,410 lb) OPERATING WEIGHT Shoes Operating weight pressure Type Width mm (in) kg (lb) /cm 2 (psi) 500 (20 ) R220NLC9A 2 (48,500) 0.55 (7.82) R220NLC9A 2pc 22,480 (49,560) 0.56 (7.97) R220LC9A 21,900 (48,280) 0.46 (6.54) R220NLC9A 22,350 (49,280) 0.47 (6.68) 600 (24 ) R220NLC9A 2pc 22,830 (50,330) 0.48 (6.83) R220LC9A H/W 23,360 (51,500) 0.50 (7.11) R220LC9A LR 24,360 (53,700) 0.51 (7.25) R220LC9A 22,250 (49,050) 0.40 (5.69) Triple grouser R220NLC9A 22,700 (50,050) 0.41 (5.83) 700 (28 ) R220NLC9A 2pc 23,180 (51,100) 0.42 (5.98) R220LC9A H/W 23,710 (52,270) 0.43 (6.11) R220LC9A LR 24,710 (54,500) 0.45 (6.40) R220LC9A 22,515 (49,640) 0.36 (5.12) 800 (32 ) R220LC9A H/W 23,975 (52,860) 0.38 (5.40) R220LC9A LR 24,975 (55,050) 0.40 (5.69) 900 (36 ) R220LC9A 22,760 (50,180) 0.32 (4.55) R220LC9A LR 25,220 (55,600) 0.36 (5.12) Double grouser 700 (28 ) R220LC9A H/W 24,135 (53,210) 0.43 (6.11) Traveling and steering Engine throttle Two levers with pedals Electric, Dial type 1

2 BUCKETS R220LC9A / R220LC9A LR / R220LC9A H/W All buckets are welded with highstrength steel. SAE heaped m 3 (yd 3 ) 0.51 (0.67) 0.80 (1.05) 0.92 (1.20) 1.10 (1.44) 1.20 (1.57) 1.34 (1.75) 0.74 (0.97) 0.90 (1.18) 1.05 (1.37) 0.87 (1.14) 1.20 (1.57) 0.75 (0.98) 0.52 (0.68) m 3 (yd 3 ) SAE heaped CECE heaped Without side cutters Width mm (in) With side cutters Weight kg (lb) Recommendation m (ft.in) 5.68 (18 8 ) Boom 2.0 Arm 2.4 Arm 2.92 (9 7 ) Arm 3.9 (12 10 ) Arm 8.2 (26 11 ) Boom 6.3 (20 8 ) Arm 0.51 (0.67) 0.80 (1.05) 0.92 (1.20) 1.10 (1.44) 1.20 (1.57) 1.34 (1.75) 0.74 (0.97) 0.90 (1.18) 1.05 (1.37) 0.87 (1.14) 1.20 (1.57) 0.75 (0.98) 0.52 (0.68) 0.45 (0.59) 0.70 (0.92) 0.80 (1.05) 0.96 (1.26) 1.00 (1.31) 1.15 (1.50) 0.65 (0.85) 0.80 (1.05) 0.92 (1.20) 0.75 (0.98) 1.00 (1.31) 0.65 (0.85) 0.45 (0.59) 700 (27.6) 1,000 (39.4) 1,150 (45.3) 1,320 (52.0) 1,400 (55.1) 1,550 (61.0) 985 (38.8) 1,070 (42.1) 1,290 (50.8) 1,140 (44.9) 1,410 (55.5) 1,790 (70.5) 935 (36.8) 820 (32.3) 1,120 (44.1) 1,270 (50.0) 1,440 (56.7) 1,520 (59.8) 1,670 (65.7) 1,035 (40.7) 570 (1,260) 700 (1,540) 770 (1,700) 830 (1,830) 850 (1,870) 920 (2,030) 770 (1,700) 810 (1,790) 890 (1,960) 900 (1,980) 1,030 (2,270) 880 (1,940) 460 (1,010) Heavyduty bucket Heavy duty Rockbucket Slope finishing bucket Long reach bucket Applicable for materials with density of kg/m 3 (3,370 lb/yd 3 ) or less Applicable for materials with density of 1,600 kg/m 3 (2,700 lb/yd 3 ) or less Applicable for materials with density of 1,100 kg/m 3 (1,850 lb/yd 3 ) or less ATTACHMENT R220LC9A / R220LC9A LR / R220LC9A H/W Booms and arms are welded, a lowstress, fullbox section design m (18 8 ) & 8.2 m (26 11 ) Booms and 2.0 m ; 2.4 m ; 2.92 m (9 7 ); 3.9 m (12 10 ) & 6.3 m (20 8 ) Arms are available. DIGGING FORCE R220LC9A / R220LC9A LR / R220LC9A H/W Boom Arm Bucket digging force Arm crowd force Length Weight Length Weight SAE ISO SAE ISO mm (ft.in) kg (lb) mm (ft.in) kg (lb) 975 (2,150) [144.8] [14770] [32550] [165.0] [16830] [37100] [156.5] [15960] [35190] [164.0] [16720] [36860] 5,680 (18 8 ) 1,950 (4,300) 2,920 (9 7 ) 1,045 (2,300) 1,095 (2,410) [144.8] [144.8] [14770] [14770] [32550] [32550] [165.0] [165.0] [16830] [16830] [37100] [37100] [129.9] [110.7] [13250] [11290] [29210] [24900] [136.3] [116.1] [13900] [11830] [30640] [26090] 3,900 (12 10 ) 1,295 (2,850) [144.8] [14770] [32550] [165.0] [16830] [37100] 84.3 [91.6] 8600 [9340] [20590] 87.3 [94.8] 8900 [9660] [21300] 8,200 (26 11 ) 2,350 (5,180) 6,300 (20 8 ) 1,330 (2,930) Remarks [ ]: Power Boost Note: Boom weight includes arm cylinder, piping and pin. Arm weight includes bucket cylinder, linkage and pin. 2

3 BUCKETS R220NLC9A All buckets are welded with highstrength steel. SAE heaped m 3 (yd 3 ) 0.51 (0.67) 0.80 (1.05) 0.87 (1.14) 0.92 (1.20) 1.10 (1.44) 1.20 (1.57) 1.34 (1.75) 0.74 (0.97) 0.90 (1.18) 1.05 (1.37) 0.87 (1.14) 0.75 (0.98) m 3 (yd 3 ) SAE heaped CECE heaped Without side cutters Width mm (in) With side cutters Weight kg (lb) Recommendation m (ft.in) 5.65 (18 6 ) Mono boom 5.65 (18 6 ) Hydraulic adjustable boom 2.00 Arm 2.40 Arm 2.92 (9 7 ) Arm 2.00 Arm 2.40 Arm 0.51 (0.67) 0.80 (1.05) 0.87 (1.14) 0.92 (1.20) 1.10 (1.44) 1.20 (1.57) 1.34 (1.75) 0.74 (0.97) 0.90 (1.18) 1.05 (1.37) 0.87 (1.14) 0.75 (0.98) 0.45 (0.59) 0.70 (0.92) 0.75 (0.98) 0.80 (1.05) 0.96 (1.26) 1.00 (1.31) 1.15 (1.50) 0.65 (0.85) 0.80 (1.05) 0.92 (1.20) 0.75 (0.98) 0.65 (0.85) 700 (27.6) 1,000 (39.4) 1,090 (42.9) 1,150 (45.3) 1,320 (52.0) 1,400 (55.1) 1,550 (61.0) 985 (38.8) 1,070 (42.0) 1,290 (50.8) 1,140 (44.9) 1,790 (70.5) 820 (32.3) 1,120 (44.1) 1,210 (47.6) 1,270 (50.0) 1,440 (56.7) 1,520 (59.8) 1,670 (65.7) 570 (1,260) 700 (1,540) 740 (1,630) 770 (1,700) 830 (1,830) 850 (1,870) 920 (2,030) 770 (1,700) 810 (1,790) 890 (1,960) 900 (1,980) 880 (1,940) Heavyduty bucket Heavy duty Rockbucket Slope finishing bucket : Applicable for materials with density of kg/m 3 (3,370 lb/yd 3 ) or less : Applicable for materials with density of 1,600 kg/m 3 (2,700 lb/yd 3 ) or less : Applicable for materials with density of 1,100 kg/m 3 (1,850 lb/yd 3 ) or less ATTACHMENT R220NLC9A Booms and arms are welded, a lowstress, fullbox section design m (18 6 ) mono boom, 5.65 m (18 6 ) hydraulic adjustable boom and 2.00 m ; 2.40 m and 2.92 m (9 7 ) arms are available. DIGGING FORCE R220NLC9A Boom Arm Bucket digging force Arm crowd force Length Weight Length Weight SAE ISO SAE ISO mm (ft.in) kg (lb) mm (ft.in) kg (lb) 975 (2,150) [141.6] 13,300 [14,440] 29,320 [31,830] [161.8] 15,200 [16,500] 33,510 [36,380] [156.5] 14,700 [15,960] 32,410 [35,190] [164.0] 15,400 [16,720] 33,950 [36,860] 5,650 (18 6 ) 1,950 (4,300) 1,045 (2,300) [141.6] 13,300 [14,440] 29,320 [31,830] [161.8] 15,200 [16,500] 33,510 [36,380] [129.9] 12,200 [13,250] 26,900 [29,210] [136.3] 12,800 [13,900] 28,220 [30,640] 2,920 (9 7 ) 1,095 (2,410) [141.6] 13,300 [14,440] 29,320 [31,830] [161.8] 15,200 [16,500] 33,510 [36,380] [110.7] 10,400 [11,290] 22,930 [24,900] [116.1] 10,900 [11,830] 24,030 [26,090] Remarks [ ]: Power Boost Note: Boom weight includes arm cylinder, piping and pin. Arm weight includes bucket cylinder, linkage and pin. 3

4 Dimensions & Working Ranges DIMENSIONS R220LC9A / R220LC9A LR mm (ft. in) A Tumbler distance 3,650 (11 12 ) B Overall length of crawler 4,440 (14 7 ) C clearance of counterweight 1,060 (3 6 ) D Tail swing radius 2,840 (9 4 ) D Rearend length 2,770 (9 1 ) E Overall width of upperstructure 2,740 (8 12 ) F Overall of cab 2,920 (9 7 ) G Min. ground clearance 480 (1 7 ) H Track gauge 2,390 5,680 (18 8 ) 8,200 (26 11 ) 2,920 (9 7 ) 3,900 (12 10 ) 6,300 (20 8 ) I Overall length 9,650 (31 8 ) 9,570 (31 5 ) 9,530 (31 3 ) 9,520 (31 3 ) 12,030 (39 6 ) J Overall of boom 3,200 (10 6 ) 3,110 (10 2 ) 3,030 (9 11 ) 3,480 (11 5 ) 3,280 (10 9 ) K Track shoe width L Overall width 600 (24 ) 700 (28 ) 800 (32 ) 900 (36 ) 2,990 (9 10 ) 3,090 (10 2 ) 3,190 (10 6 ) 3,290 (10 10 ) WORKING RANGES R220LC9A / R220LC9A LR 8,200 (26 11 ) 5,680 (18 8 ) 2,920 (9 7 ) 3,900 (12 10 ) 6,300 (20 8 ) A reach 9,140 (29 12 ) 9,500 (31 2 ) 9,980 (32 9 ) 10,910 (35 10 ) 15,220 (49 11 ) reach on ground 8,960 (29 5 ) 9,330 (30 7 ) 9,820 (32 3 ) 10,770 (35 4 ) 15,120 (49 7 ) B depth 5,820 (19 1 ) 6,220 (20 5 ) 6,730 (22 1 ) 7,720 (25 4 ) 11,760 (38 7 ) B depth (8 level) 5,580 (18 4 ) 6,010 (19 9 ) 6,560 (21 6 ) 7,580 (24 10 ) 11,650 (38 3 ) C Max. vertical wall digging depth 5,280 (17 4 ) 5,720 (18 9 ) 6,280 (20 7 ) 7,240 (23 9 ) 9,610 (31 6 ) D 9,140 (29 12 ) 9,340 (30 8 ) 9,600 (31 6 ) 10,110 (33 2 ) 12,550 (41 2 ) E Max. dumping 6,330 (20 9 ) 6,520 (21 5 ) 6,780 (22 3 ) 7,290 (23 11 ) 10,280 (33 9 ) F Min. front swing radius 3,750 (12 4 ) 3,740 (12 3 ) 3,740 (12 3 ) 3,650 (11 12 ) 4,870 (15 12 ) A 4

5 Dimensions & Working Ranges DIMENSIONS R220NLC9A D (D') E J F C G I A B K H L mm (ft. in) A Tumbler distance B Overall length of crawler C clearance of counterweight D Tail swing radius D Rearend length E Overall width of upperstructure 3,650 (12 0 ) 4,440 (14 7 ) 1,060 (3 6 ) 2,800 (9 2 ) 2,770 (9 1 ) 2,530 (8 4 ) I J Overall length Overall of boom 9,650 (31 8 ) 3,250 (10 8 ) 5,650 (18 6 ) 9,570 (31 5 ) 3,170 (10 5 ) 2,920 (9 7 ) 9,510 (31 2 ) 3,100 (10 2 ) F G H Overall of cab Min. ground clearance Track gauge 2,920 (9 7 ) 480 (1 7 ) K L Track shoe width Overall width 500 (20 ) 2,500 (8 2 ) 600 (24 ) 2,600 (8 6 ) 700 (28 ) 2,700 (8 9 ) WORKING RANGES R220NLC9A 5,650 (18 6 ) 2,920 (9 7 ) A reach 9,140 (29 12 ) 9,510 (31 2 ) 9,960 (32 8 ) A reach on ground 8,960 (29 5 ) 9,340 (30 8 ) 9,800 (32 2 ) B depth 5,750 (18 10 ) 6,150 (20 2 ) 6,640 (21 9 ) B depth (8 level) 5,520 (18 1 ) 5,950 (19 6 ) 6,470 (21 3 ) C Max. vertical wall digging depth 5,320 (17 5 ) 5,780 (19 0 ) 6,250 (20 6 ) D 9,270 (30 5 ) 9,500 (31 2 ) 9,740 (31 11 ) E Max. dumping 6,450 (21 2 ) 6,660 (21 10 ) 6,900 (22 8 ) F Min. front swing radius 3,710 (12 2 ) 3,630 (11 11 ) 3,580 (11 9 ) 5

6 Dimensions & Working Ranges DIMENSIONS R220NLC9A HYDRAULIC ADJUSTABLE BOOM D (D') E J F C G I A B K H L mm (ft. in) A Tumbler distance B Overall length of crawler C clearance of counterweight D Tail swing radius D Rearend length E Overall width of upperstructure 3,650 (12 0 ) 4,440 (14 7 ) 1,060 (3 6 ) 2,800 (9 2 ) 2,770 (9 1 ) 2,530 (8 4 ) I J Overall length Overall of boom 9,620 (31 7 ) 3,050 (10 0 ) 5,650 (18 6 ) 9,550 (31 4 ) 3,000 (9 10 ) F G H Overall of cab Min. ground clearance Track gauge 2,920 (9 7 ) 480 (1 7 ) K L Track shoe width Overall width 500 (20 ) 2,500 (8 2 ) 600 (24 ) 2,600 (8 6 ) 700 (28 ) 2,700 (8 9 ) WORKING RANGES R220NLC9A HYDRAULIC ADJUSTABLE BOOM 5,650 (18 6 ) A A B reach reach on ground depth B depth (8 level) Max. vertical wall C digging depth D E F Max. dumping Min. front swing radius 9,120 (29 11 ) 8,940 (29 4 ) 5,480 (17 12 ) 5,360 (17 7 ) 4,560 (14 12 ) 10,300 (33 10 ) 7,390 (24 3 ) 2,870 (9 5 ) 9,530 (31 3 ) 9,360 (30 9 ) 5,890 (19 4 ) 5,770 (18 11 ) 4,990 (16 4 ) 10,670 (35 0 ) 7,740 (25 5 ) 2,670 (8 9 ) 6

7 Dimensions & Working Ranges DIMENSIONS R220LC9A HIGH WALKER mm (ft. in) A Tumbler distance 3,650 (11 12 ) B Overall length of crawler 4,440 (14 7 ) C clearance of counterweight 1,240 (4 1 ) D Tail swing radius 2,840 (9 4 ) D Rearend length 2,770 (9 1 ) E Overall width of upperstructure 2,740 (8 12 ) F Overall of cab 3,100 (10 2 ) G Min. ground clearance 660 (2 2 ) H Track gauge 2,790 (9 2 ) 5,680 (18 8 ) 2,920 (9 7 ) 3,900 (12 10 ) I Overall length 9,650 (31 8 ) 9,550 (31 4 ) 9,470 (31 1 ) 9,560 (31 4 ) J Overall of boom 3,290 (10 10 ) 3,170 (10 5 ) 3,060 (10 0 ) 3,450 (11 4 ) K Track shoe width Type Width L Overall width 600 (24 ) Triple grouser 700 (28 ) 800 (32 ) Double grouser 710 (28 ) 3,395 (11 2 ) 3,495 (11 6 ) 3,595 (11 10 ) 3,505 (11 6 ) WORKING RANGES R220LC9A HIGH WALKER 5,680 (18 8 ) 2,920 (9 7 ) 3,900 (12 10 ) A reach 9,140 (29 12 ) 9,500 (31 2 ) 9,980 (32 9 ) 10,910 (35 10 ) reach on ground 8,920 (29 3 ) 9,290 (30 6 ) 9,820 (32 3 ) 10,730 (35 2 ) B depth 5,630 (18 6 ) 6,010 (19 9 ) 6,550 (21 6 ) 7,530 (24 8 ) B depth (8 level) 5,390 (17 8 ) 5,820 (19 1 ) 6,380 (20 11 ) 7,390 (24 3 ) C Max. vertical wall digging depth 5,090 (16 8 ) 5,630 (18 6 ) 6,100 (20 0 ) 7,050 (23 2 ) D 9,330 (30 7 ) 9,530 (31 3 ) 9,780 (32 1 ) 10,300 (33 10 ) E Max. dumping 6,520 (21 5 ) 6,710 (22 0 ) 6,960 (22 10 ) 7,480 (24 6 ) F Min. front swing radius 3,750 (12 4 ) 3,740 (12 3 ) 3,740 (12 3 ) 3,650 (11 12 ) A 7

8 Lifting Capacities R220LC9A Boom : 5.68 m (18 8 ) / Arm : 2.0 m / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 600 mm (24 ) triple grouser Rating overfront Rating overside or 360 degrees Boom : 5.68 m (18 8 ) / Arm : 2.40 m / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 600 mm (24 ) triple grouser Boom : 5.68 m (18 8 ) / Arm : 2.92 m (9 7 ) / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 600 mm (24 ) triple grouser 1. Lifting capacity is based on SAE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates the load limited by hydraulic capacity. 8

9 Lifting Capacities R220LC9A Boom : 5.68 m (18 8 ) / Arm : 3.90 m (12 10 ) / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 600 mm (24 ) triple grouser Rating overfront Rating overside or 360 degrees R220LC9A HIGH WALKER Boom : 5.68 m (18 8 ) / Arm : 2.40 m / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 600 mm (24 ) triple grouser Rating overfront Rating overside or 360 degrees Boom : 5.68 m (18 8 ) / Arm : 2.92 m (9 7 ) / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 600 mm (24 ) triple grouser 9

10 Lifting Capacities R220LC9A HIGH WALKER Boom : 5.68 m (18 8 ) / Arm : 3.90 m (12 10 ) / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 600 mm (24 ) triple grouser Rating overfront Rating overside or 360 degrees Boom : 5.68 m (18 8 ) / Arm : 2.40 m / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 800 mm (32 ) triple grouser Boom : 5.68 m (18 8 ) / Arm : 2.92 m (9 7 ) / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 800 mm (32 ) triple grouser 10

11 Lifting Capacities R220LC9A HIGH WALKER Boom : 5.68 m (18 8 ) / Arm : 3.90 m (12 10 ) / Bucket : 0.92 m 3 (1.20 yd 3 ) SAE heaped / Shoe : 600 mm (24 ) triple grouser Rating overfront Rating overside or 360 degrees R220LC9A LONG REACH Boom : 8.2 m (26 11 ) / Arm : 6.3 m (20 8 ) / Bucket : 0.52 m 3 (0.68 yd 3 ) SAE heaped / Shoe : 800 mm (32 ) triple grouser with 5,300 kg (11,680 lb) Counterweight Rating overfront Rating overside or 360 degrees 1. Lifting capacity is based on SAE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates the load limited by hydraulic capacity. 11

12 Lifting Capacities R220NLC9A MONO BOOM Boom : 5.65 m (18 6 ) / Arm : 2.00 m / Bucket : 0.87 m 3 (1.14 yd 3 ) SAE heaped / Shoe : 500 mm (20 ) triple grouser Rating overfront Rating overside or 360 degrees Boom : 5.65 m (18 6 ) / Arm : 2.40 m / Bucket : 0.87 m 3 (1.14 yd 3 ) SAE heaped / Shoe : 500 mm (20 ) triple grouser Boom : 5.65 m (18 6 ) / Arm : 2.92 m (9 7 ) / Bucket : 0.87 m 3 (1.14 yd 3 ) SAE heaped / Shoe : 500 mm (20 ) triple grouser 1. Lifting capacity is based on SAE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates the load limited by hydraulic capacity. 12

13 Lifting Capacities R220NLC9A / HYDRAULIC ADJUSTABLE BOOM Boom : 5.65 m (18 6 ) / Arm : 2.00 m / Bucket : 0.87 m 3 (1.14 yd 3 ) SAE heaped / Shoe : 500 mm (20 ) triple grouser Rating overfront Rating overside or 360 degrees Boom : 5.65 m (18 6 ) / Arm : 2.40 m / Bucket : 0.87 m 3 (1.14 yd 3 ) SAE heaped / Shoe : 500 mm (20 ) triple grouser 1. Lifting capacity is based on SAE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of the tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook located on the back of the bucket. 4. (*) indicates the load limited by hydraulic capacity. 13

14 STANDARD EQUIPMENT R220LC9A / R220NLC9A ISO Standard cabin Allweather steel cab with 360 visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window (LH) One key fits all lockable doors Hot & cool box Storage compartment & Ashtray Radio / MP3 Player with remote control and USBinput Handsfree mobile phone system with USBcharging device Transparent cabin roofcover 12 volt power outlet (24V DC to 12V DC converter) Sun visor Rain guard front window Computer aided power optimization (CAPO) system 3power modes, 2work modes, User mode Auto & onetouch deceleration system Auto warmup system Overheat prevention system Automatic temperature control Air conditioner & heater Defroster Selfdiagnostics system Starting Aid (air grid heater) for cold weather Centralized monitoring LCD display Engine speed or Trip meter Clock Gauges Fuel level gauge Engine coolant temperature gauge Hyd. oil temperature gauge Warning lamps Engine warning Overload Communication error Low battery Air filter clogging Indicators Max power Low speed/high speed Fuel warmer Auto deceleration Rearview camera Door and cab locks, one key Three outside rearview mirrors Mechanical suspension seat with heater Adjustable joysticks Console box tilting system Four front working lights Electric horn Batteries (2 x 12V x 100 AH) Battery master switch Removable cleanout screen for coolers Automatic swing brake Fuel prefilter with fuel warmer Boom holding system Arm holding system Track shoes (600 mm; 24 ) Track rail guard Accumulator for lowering work equipment Lower frame under cover Viscous fan clutch Fuel filler pump (50 l/min) Safety lock valve for boom cylinder with overload warning device Doubleacting piping kit (clamshell, etc.) Travel alarm Boom 5.68 m; 18 8 Arm 2.92 m; 9 7 Cabin ROPS (ISO ) ROPS (Roll Over Protective Structure) Himate (Remote Management System) OPTIONAL EQUIPMENT R220LC9A / R220NLC9A Beacon lamp Safety lock valve for arm cylinder Singleacting piping kit (breaker, etc.) Quick coupler Boom R220LC9A 5.68 m; 18 8 Heavy duty 8.2 m; Long reach Boom R220NLC9A 5.65 m; m; 18 6 hydraulic adjustable Arm R220LC9A 2.0 m; m; m; 9 7 Heavy duty 3.9 m; m, 20 8 Long reach Arm R220NLC9A 2.0 m; m; m; 9 7 not for hydraulic adjustable boom Cabin FOPS/FOG (ISO/DIS Level II) FOPS (Falling Object Protective Structure) FOG (Falling Object Guard) Cabin guard front Wire net Fine net Cabin roofsteel cover Cabin lights Track shoes R220LC9A Triple grousers shoe (700 mm; 28 ) Triple grousers shoe (800 mm; 32 ) Triple grousers shoe (900 mm; 36 ) Double grousers shoe (700 mm; 28 ) Full track rail guard (High walker only) Track shoes R220NLC9A Triple grousers shoe (500 mm; 20 ) Triple grousers shoe (600 mm; 25 ) Triple grousers shoe (700 mm; 28 ) Additional lower frame reinforced under cover Seat Adjustable air suspension seat Adjustable air suspension seat with heater Mechanical suspension seat Pattern change valve (2 patterns) Air compressor * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to international standards. * The photos may include attachments and optional equipment that are not available in your area. * Materials and specifications are subject to change without advance notice. * All imperial measurements rounded off to the nearest pound or inch. PLEASE CONTACT EN Rev 0

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries enters a new chapter in construction

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite

More information

With Tier 4 Interim Engine installed. hyundai heavy industries

With Tier 4 Interim Engine installed. hyundai heavy industries With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

We build a better future

We build a better future We build a better future Equipped with Tier Engine *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite technology, provides our customers

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

*Photo may include optional equipment. Equipped with Tier 3 Engine

*Photo may include optional equipment. Equipped with Tier 3 Engine *Photo may include optional equipment. Equipped with Tier 3 Engine Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy Industries do everything

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP

More information

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084c 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP

More information

55-7A. Dimensions. Working Ranges. Standard Equipment

55-7A. Dimensions. Working Ranges. Standard Equipment Dimensions Unit (mm) Working Ranges Standard Equipment Boom length 3,000 mm(9' 10") Arm length 1,600 mm(5' 3") 1,900 mm(6' 3") A Max. digging reach A' Max. digging reach at ground B Max. digging depth

More information

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

290LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 290LC-7A PLEASE CONTACT

290LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 290LC-7A PLEASE CONTACT Standard Equipment Optional Equipment Robex 290LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding

More information

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S DIN ummins QSL9 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 267 kw (359 HP) at 1,650 rpm J1349 (net) 257 kw (344 HP)

More information

250LC-7 / 250NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 250LC-7 PLEASE CONTACT

250LC-7 / 250NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 250LC-7 PLEASE CONTACT Robex 250LC7 Standard Equipment ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window Lockable

More information

7 SERIES MINI EXCAVATOR

7 SERIES MINI EXCAVATOR Dimensions 1,650 986 Standard Equipment 2,850 2,610 290 6,100 2,100 1,600 1,925 7 SERIES MINI EXCAVATOR ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with

More information

*Photo may include optional equipment. We build a better future

*Photo may include optional equipment. We build a better future *Photo may include optional equipment. We build a better future Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy Industries do everything we

More information

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, optimal

More information

Dimensions & Working Range

Dimensions & Working Range We build a better future Dimensions & Working Range R35Z-9 Dimensions With Tier 4 Engine installed mm (ft.in) A B C D E F Overall width of upper structure Overall width of cab Overall height of cab Tail

More information

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more

More information

The print quality of this copy is not an accurate representation of the original.

The print quality of this copy is not an accurate representation of the original. We build a better future Equipped with Tier 3a engine *Photo may include optional equipment. Pleasure works an operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

CRAWLER EXCAVATOR Applied Tier 2 Engine ROBEX 500LC-7 PLEASE CONTACT Rev 7.

CRAWLER EXCAVATOR Applied Tier 2 Engine ROBEX 500LC-7 PLEASE CONTACT Rev 7. Standard Equipment Optional Equipment ROBEX 500LC7 ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding

More information

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS, INC. Pride at Work Hyundai Heavy Industries

More information

500LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 500LC-7A PLEASE CONTACT

500LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 500LC-7A PLEASE CONTACT Standard Equipment Optional Equipment ROBEX 500LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

NEW 7 SERIES MINI EXCAVATOR

NEW 7 SERIES MINI EXCAVATOR Working ranges A A' Boom length Arm length A Max. digging reach,000 mm(9' 10") 1,600 mm(5' ") 1,900 mm(6' ") 6,150 mm(20' 2") 6,400 mm(21' 0") A' Max. digging reach at ground 6,010 mm(19' 9") 6,270 mm(20'

More information

We build a better future

We build a better future STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin Allweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window

More information

HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed. * Photo may include optional equipment.

HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed. * Photo may include optional equipment. STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level Ⅰ) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield

More information

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1 R55W-7_taal_en 05-09-2005 15:20 Pagina 1 NEW 7 SERIES MINI EXCAVATOR Yanmar 4TNV94L Engine 42kW/57HP Operating weight 5,450 (12,020 ) Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) Photo may include

More information

NEW 7A SERIES. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT

NEW 7A SERIES. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT Standard Equipment Optional Equipment Robex 250LC-7A ISO standard cab All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129 kw (173 HP) at 1,950 rpm Gross Power SAE J1995 / 136 kw (183 HP) at 1,950 rpm Travel Speed

More information

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS, INC. Pride at Work Hyundai Heavy Industries

More information

800LC-7A PLEASE CONTACT. CRAWLER EXCAVATOR With Tier 3 Engine installed. Robex 800LC-7A

800LC-7A PLEASE CONTACT. CRAWLER EXCAVATOR With Tier 3 Engine installed. Robex 800LC-7A Standard Equipment Optional Equipment Robex 800LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES MOVING YOU FURTHER *Photo may include optional equipment. 330LC-9A(resized).indd 2 1/11/2013 1:54:28 PM PRIDE AT WORK Hyundai Heavy Industries

More information

800LC-7A PLEASE CONTACT. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 800LC-7A

800LC-7A PLEASE CONTACT. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 800LC-7A Standard Equipment Optional Equipment ROBEX 800LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

STANDARD EQUIPMENT OPTIONAL EQUIPMENT STANDARD EQUIPMENT OPTIONAL EQUIPMENT We build a better future ISO Standard cabin Allweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window

More information

We build a better future

We build a better future STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin Allweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window

More information

We build a better future

We build a better future STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin Allweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window

More information

We build a better future

We build a better future STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin Allweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window

More information

We build a better future. With Tier 3 Engine installed. *Photo may include optional equipment Rev. 0

We build a better future. With Tier 3 Engine installed. *Photo may include optional equipment Rev. 0 STANDARD EQUIPMENT optional EQUIPMENT ISO Standard cabin Allweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window(lh)

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. 520LC9A(resized).indd 3 1/11/2013 3:58:28 PM PRIDE AT WORK Hyundai Heavy Industries

More information

Tool kit Long Arm (1.35m, 4'5") Heater & Defroster Lever pattern change valve Additional CWT

Tool kit Long Arm (1.35m, 4'5) Heater & Defroster Lever pattern change valve Additional CWT STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 230 HP (171 kw) at 1,950 rpm Gross Power SAE J1995 / 242 HP (180 kw) at 1,950 rpm Travel Speed

More information

We build a better future

We build a better future STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin Allweather steel cab with 30 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window

More information

Standard Equipment. We build a better future. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

Standard Equipment. We build a better future. With Tier 4 Interim Engine installed. *Photo may include optional equipment. Standard Equipment We build a better future ISO standard cabin Cabin ROPS(ISO 12117-2) FOPS(ISO 3449) FOG(ISO 10262 Level ) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

STANDARD EQUIPMENT MOVING YOU FURTHER OPTIONAL EQUIPMENT HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed

STANDARD EQUIPMENT MOVING YOU FURTHER OPTIONAL EQUIPMENT HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front

More information

MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment. Pride at Work Hyundai Heavy Industries strives to build stateofthe art earthmoving

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

STANDARD EQUIPMENT OPTIONAL EQUIPMENT STANDARD EQUIPMENT OPTIONAL EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window

More information

We build a better future

We build a better future We build a better future With Tier 2 Engine installed PLEASE CONTACT Head Office (Sales Office) 18TH FI., DIGITAL CUBE BLDG. 34, SANGAMSANRO, MAPOGU, SEOUL 121904, KOREA TEL: 82 2 6424 1118 FAX: 82264241129

More information

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34.

Two variable displacement piston pumps L/min (2 x 79.3 gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) Travel circuit 34. 922E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 22,800 kg (50,265 lb) SWING SYSTEM ELECTRIC SYSTEM Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes,

More information

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi)

Swing torque 80,800 N m (59,595 lbf ft) Two variable displacement piston pumps L/min ( gal/min) 34.3/37.3 MPa (4,975 / 5,410 psi) 925E EXCAVATOR Tier 4 Final / Stage IV Specifications Operating weight 25,500 kg (56,218 lb) Operating weight includes coolant, lubricants, full fuel tank, cab, standard shoes, boom, arm, bucket and operator

More information

320LC-7 / 320NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 320LC-7 PLEASE CONTACT

320LC-7 / 320NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 320LC-7 PLEASE CONTACT Standard Equipment Optional Equipment Robex 320LC7 ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding

More information

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,

More information

Doosan Infracore DX700LC TECHNICAL DATA

Doosan Infracore DX700LC TECHNICAL DATA Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 87 kw (116 HP) at 1,950 rpm Gross Power SAE J1995 / 92.7 kw (124 HP) at 1,950 rpm Travel Speed

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving

More information

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp)

ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC kw (159 hp) ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS ZX245LC-5 119 kw (159 hp) ZX245LC-5 ZAXIS DASH-5 Ultrashort-CLASS EXCAVATORS Engine ZX245LC-5 Manufacturer and Model Isuzu 4HK1 Non-Road Emissions Standard EPA

More information

MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed Rev 0

MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed Rev 0 Standard Equipment ISO standard cabin Cabin ROPS(ISO 3471) FOG(ISO 10262 LevelI) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield

More information

We build a better future

We build a better future STANDARD EQUIPMENT ISO Standard cabin All-weather steel cab with 360 0 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(lh) Lockable door Hot

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. *Photo may include optional equipment Rev. 0

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. *Photo may include optional equipment Rev. 0 STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level I) TOPS(ISO 12117) Centralized monitoring Gauges Fuel level gauge OPTIONAL EQUIPMENT Engine coolant temperature

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. We build a better future. *Photo may include optional equipment Rev.

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. We build a better future. *Photo may include optional equipment Rev. We build a better future STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 106 Level I) TOPS(ISO 1117) Centralized monitoring Gauges Fuel level gauge Engine coolant temperature

More information

Quick coupler Rubber crawler (450 mm, 1 6 ) Narrow bucket (0.14m 3, 0.18yd 3 ) Long arm (2.2m, 7' 3") Tool kit Operator suit

Quick coupler Rubber crawler (450 mm, 1 6 ) Narrow bucket (0.14m 3, 0.18yd 3 ) Long arm (2.2m, 7' 3) Tool kit Operator suit STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 12117-2) FOG(ISO 10262 Level I) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed 5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph)

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51

CX800B EXCAVATOR. Number of rollers Top, each track 3 Bottom, each track 9 Number of shoes Double grouser each side 51 CX800B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/ Displacement Fuel injection Fuel Fuel filter Cooling Horsepower per SAE J1349

More information

EQUIPMENT ENGINE HYDRAULIC SYSTEM

EQUIPMENT ENGINE HYDRAULIC SYSTEM EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

STANDARD EQUIPMENT OPTIONAL EQUIPMENT STANDARD EQUIPMENT OPTIONAL EQUIPMENT ISO Standard cabin O All-weather steel cab with 360 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(lh)

More information

With Tier 4 final / Stage III B Engine installed

With Tier 4 final / Stage III B Engine installed With Tier 4 final / Stage III B Engine installed *Foto kan optionele uitrusting omvatten. Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed

More information

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive

Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier 3, Tier 4) 6 8.3(506) 188(252) Direct Injection Turbocharged, air-to-air charge air cooler COOLING Fan Drive 330 EXCAVATOR ENGINE Engine Make/ Engine Model Emission Rating (optional) Cylinders Displacement L (cu. In) Net Power kw (Hp) @2,200 rpm Fuel System Aspiration Cummins / 6CTA8.3-C or Rhino Tier 2 (Tier

More information

We build a better future

We build a better future STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 424 HP (316 kw) at 1,900 rpm Gross Power SAE J1995 / 444 HP (331 kw) at 1,900 rpm Travel Speed

More information

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC

More information

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump

Hydraulic. Open center, load sensing Main Pumps. 2 variable-displacement axial-piston pumps Maximum Rated Flow 105 L/m (28 gpm) x 2 Pilot Pump 14 Engine Base engine for use in the U.S., U.S. Territories, and Canada Optional engine for use outside the U.S. and U.S. Territories Manufacturer and Model John Deere PowerTech PWX John Deere 4045H Non-Road

More information

Technical specifications

Technical specifications Technical specifications Q Engine Model Doosan DL06K 4-Cycle Water-Cooled, Turbocharged, Coon Rail Direct Injection, Exhaust Gas Recirculation Diesel Particulate Filter (DPF) No. of cylinders 6 Rated power

More information

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design

Number of rollers Top, each track 3 Bottom, each track 8 Number of shoes Double grouser each side 47. Variable displacement axial piston design CX700B EXCAVATOR TIER III CERTIFIED ENGINE Model Type AH-6WG1XYSS, Tier III certified 4-stroke, turbocharged Cylinders 6 Bore/Stroke Displacement 5.79 in x 6.07 in (147 x 154 mm) 957 in 3 (15 700 cc) Grade

More information

We build a better future

We build a better future STNDRD EQUIPMENT optional EQUIPMENT ISO Standard cabin llweather steel cab with 360 O visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window(lh) Lockable

More information

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,

More information

37,6 kw / 50,4 Hp at rpm kg mm DX60R. Compact Equipment

37,6 kw / 50,4 Hp at rpm kg mm DX60R. Compact Equipment 37,6 kw / 50,4 Hp at 2.200 rpm 5.875 kg 3.725-4.145 mm DX60R Compact Equipment Doosan DX60R hydraulic excavator: a new model with novel features The new DX60R hydraulic excavator offers additional value

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129.4 kw (174 HP) at 2,000 rpm Gross Power SAE J1995 / 136.8 kw (183 HP) at 2,000 rpm Travel Speed

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment

40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment 40,7 kw / 54,6 Hp at 2.000 rpm 8.330 kg 4.180-4.675 mm DX80R Compact Equipment Doosan DX80R hydraulic excavator: a new model with novel features The new DX80R hydraulic excavator offers additional value

More information

ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp)

ZAXIS DASH-5 utility-class EXCAVAtORS. ZX250lC kw (188 hp) ZAXIS DASH-5 utility-class EXCAVAtORS ZX250lC-5 140 kw (188 hp) ZX250lC-5 ZAXIS DASH-5 utility-class EXCAVAtORS Engine ZX250LC-5 Manufacturer and Model Isuzu 4HKIZXSA-01 Non-Road Emissions Standards EPA

More information

We build a better future

We build a better future We build a better future * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include

More information

Doosan Infracore DX225LL TECHNICAL DATA

Doosan Infracore DX225LL TECHNICAL DATA Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 127 kw (171 HP) at 1,800 rpm Gross Power SAE J1995 / 134 kw (180 HP) at 1,800 rpm Travel Speed

More information

Doosan Infracore DX55W TECHNICAL DATA

Doosan Infracore DX55W TECHNICAL DATA Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE

More information

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0 GROSS HORSEPOWER 110 KW 147 HP NET HORSEPOWER 103 KW 138 HP OPERATING WEIGHT 23,350 kg MAX HORIZONTAL REACH 15,240 mm Super Long Front PC 210 HYDRAULIC EXCAVATOR H Y D R A U L I C E X C A V A T O R WALK

More information

EC460 VOLVO EXCAVATOR LONG CRAWLER

EC460 VOLVO EXCAVATOR LONG CRAWLER VOLVO EXCAVATOR EC460 LONG CRAWLER Engine power, gross: 239 kw (321 hp) Operating weight: 44.3 ~ 46.0 t Buckets (SAE): 1900 ~ 2300 l Low-emission, turbocharged Cummins diesel engine with direct injection

More information

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel

More information

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa)

HYDRAULICS. Pilot control hydraulic system Pump (1)... Gear design Maximum capacity gpm (21 L/min) Relief pressure psi (3900 kpa) 9020B Excavator ENGINE Model... Case 4TA-390 Type... 4-stroke, turbocharged and aftercooled Cylinders... 4 Bore/Stroke... 4.02 x 4.72 (102 x 120 mm) Displacement... 239 in 3 (3.9 L ) Fuel injection...

More information

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp)

ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC kw (121 hp) ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS ZX180LC-5 90 kw (121 hp) ZX180LC-5 ZAXIS DASH-5 UTILITY-CLASS EXCAVATORS Engine ZX180LC-5 Manufacturer and Model Isuzu 4JJ1 Non-Road Emissions Standards Certified

More information

TOUGH WORLD. TOUGH EQUIPMENT.

TOUGH WORLD. TOUGH EQUIPMENT. Engine Yanmar 4TNV98 Net Power 44.5 kw (60 hp) Operating Weight 7,500 kg Bucket Capacity 0.32 m³ 908E EXCAVATOR TOUGH WORLD. TOUGH EQUIPMENT. 1 MAXIMIZE YOUR RETURN ON INVESTMENT POWERFUL ENGINE The 908E

More information