NEW 7 SERIES MINI EXCAVATOR

Size: px
Start display at page:

Download "NEW 7 SERIES MINI EXCAVATOR"

Transcription

1 Working ranges A A' Boom length Arm length A Max. digging reach,000 mm(9' 10") 1,600 mm(5' ") 1,900 mm(6' ") 6,150 mm(20' 2") 6,400 mm(21' 0") A' Max. digging reach at ground 6,010 mm(19' 9") 6,270 mm(20' 7") B Max. digging depth B' Max. digging depth(8ft level),820 mm(12' 6"),420 mm(11' ") 4,060 mm(1' 4"),700 mm(12' 2") C Max. vertical wall digging depth,200 mm(10' 6"),460 mm(11' 4") 5,780 mm(18' 12") 4,050 mm(1' ") 2,50 mm( 7' 9") 5,920 mm(19' 5") 4,180 mm(1' 9") 2,60 mm( 7' 9") D Max. digging height E Max. dumping height F Min. front radius C B' B E D F Dimensions NEW 7 SERIES MINI EXCAVATOR Yanmar 4TNV94L Engine 40kW/5HP Operating weight 5,700 (12,570 ) Bucket capacity, SAE 0.06~0.18m (0.08~0.24yd) Standard Equipment 420 2,550 1, ,990 2,50 5,900 Door and cab locks, one key AM/FM radio and cassette Two outside rear view mirrors Fully adjustable suspension seat with seat belt Console box tilting system(lh.) Four front working lights Electric horn Battery (1 x 12 V x 100 AH) Battery master switch 12 volt power supply(dc-dc converter) Removable clean out screen for radiator Automatic swing brake Removable reservoir tank Water separator, fuel line Counterweight (210, 460 ) Mono boom (.0 m, 9 10 ) Arm (1.6 m, 5 ) Track shoes (400 mm, 15.7 ) Track rail guard Optional Equipment 80 2, ISO standard cabin ᴌCabin ROPS(ISO 471) FOPS(ISO 449) TOPS(ISO 12117) ᴌAll-weather steel cab with all-around visibility ᴌSafety glass windows ᴌSliding fold-in front window ᴌSliding side window ᴌLockable door ᴌAccessory box & Ash-tray Heater & Defroster Centralized monitoring ᴌEngine speed ᴌGauges Fuel level gauge Engine coolant temperature gauge ᴌWarning Engine coolant & Fuel level Engine oil pressure Engine coolant temperature Hyd. oil temperature Low battery Air cleaner closing 1,500 1,920 Air-conditioner(4000 kcal/hr, 16000BTU/hr) Fuel filler pump(5ὀ/min, 9.2 US gpm) Beacon lamp Safety lock valve for boom cylinder Single acting piping kit( breaker, etc) Double acting piping kit(clamshell, etc) Accumulator, work equipment lowering Electric transducer Travel alarm Quick coupler Rubber crawler (400mm, 15.7 ) Narrow bucket(0.07m, 0.09yd) Arm (1.9m) Tool kit Operator suit Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards. All US measurment are rounded off to nearest pound or inche. PLEASE CONTACT Rev 0.

2 Hyundai Robex 55-7 Maximized Workability Comfortable Operating Environment Advanced Hydraulic System Enhanced Durability & Reliability Improved Fuel Efficiency 2

3 Technology in Cab Design Wide, Comfortable Operating Space All the controls are designed and positioned according to the latest ergonomic research. Reinforced pillars have also been added for greater cab rigidity. Reliable Instrument Panel All information from the devices such as engine RPM, engine water temp, fuel status and the state of all types of electric switches provide the operator with an exact condition of machine. This feature makes troubleshooting much easier. Various Storage Spaces Inside Cabin Radio & Cassette Player Standard Deluxe radio & cassette player are installed. Convenient and Comfortable Space 755mm Wide Cab with Excellent Visibility High-output Air Conditioner & Heater Sensitive Joystick and Easy Entrance Sliding Side Window Big Sized Sun Visor & Top Glass The cab is roomy and ergonomically designed with low noise level and good visibility. A full view front window and large rear and side windows provide excellent visibility in all directions. Large capacity air conditioning system is installed for operator s comfort in all climate. For more convenience, the cab is equipped with defroster for the cold seasons. The big sun visor and top glass are Rise-up wiper gives better front Sliding fold-in front window is easily installed on the top of the front view to operator. opened and safely maintained in window to block direct sunlight open position to improve the working and increase operator s visibility. condition. New joystick grips for precise and The sliding side window provides convenient control. The large door more convenience for the operator allows the operator to enter and without having to opening the door. exit easily. ᵉ Rise-up Wiper Easy to Open Front Window Smooth Travel Pedals and Foot Rests Travel pedals and levers are equipped with ergonomically designed foot rests. It enables the operator to work easily and quickly. Top Glass : Bronze color and laminated glass 4 5

4 Unparalleled Technology of R55-7. It will fulfill your dreams The Highest Engine Power in its Class Tier II YANMAR 4TNV94L 5 HP / 2,200 rpm 6 Yanmar 4TNV94L engine provides 20.6 f. m (149. ft) of maximum torque with 5 HP at 2,200rpm of rated power. This means the R55-7 runs with the most power in its class, giving you more power to get the job done. 7

5 Powerful & Dynamic Work! Hyundai Mini Excavator R55-7 Powerful and Dynamic Work! Exceptional Traction and Lifting Capacity Reinforced Bucket Reinforced Arm Slope-type Side Member The considerable traction and lifting The design includes bucket link Reinforcements are welded to Applied slope type side member capacity enable all work to be done durability and anti-wear characteristics protect the arm from impacts and prevents soil stocking and extends quickly. with additional reinforcement plates on wear. life of the machine. cutting edge section. Reinforced bucket is made with thicker steel and additional lateral plate. Impressive Gradeability Centralized Grease Fittings Installation for Breaker Operation 5 degree(70%) of high gradeability Grease fittings are highlighted and Overload relief value and pipes are and long tumbler distance may be centralized for fast access when installed as standard for customer s doing your service checks. Save convenience. easier to work at slope area. time and money during routine maintenance. Offset Boom Swing The R55-7 is designed for efficient work in congested residential and urban areas. The boom can be offset within a range of 10 degrees. 8 9

6 Increased Higher Performance and Durability Strong and Stable Lower Frame Reinforced box-section frame is all welded with low-stress and high-strength. It guarantees safety and resistance through high tensile strength steel panels, with highly durable upper and lower rollers and track guards against external impact when driving on rough terrain. Performance and Durability Arrangement Between Bucket and Blade Powerful Dozer Blade Tough, Durable Undercarriage The bucket is designed to minimize Large size blade improves work The R55-7 has an undercarriage constructed with tough, durable, roboticallythe gap with blade. efficiency and equipment durability. welded steel. Tapered, upper roller side supports were installed to keep tracks This feature improves working properly aligned at all times. efficiency in grading. 10 Rectangular Tube Cabin FEM(Finite Element Method) Applied Side Protector Large Capacity Radiator The cabin style protects the operator against falling objects, ensuring operator safety. (ROPS, FOPS, TOPS STD.) Durability of structure is proven When the machine turns, the side To improve the performance in through FEM(Finite Element protector prevents any damage to oveload or continual work, large Method) analysis and long term engine hood. capacity radiator was installed. durability test. 11

7 Reliability and Serviceability Reliability and Serviceability Easy to Maintain Engine Components Easy Change Air Cleaner Easy to Fill up with Fuel(Option) The R55-7 was built with accessibility in The R55-7 is fitted with durable The Fuel filler pump provide easy mind. All doors, covers and hoods were plastic air cleaner for easy filling of fuel tank from other tanks built for complete open access. You ll maintenance and quick service. by electric device. find that the R55-7 offers plenty of space to complete your regular maintenance and service hassle-free. 12 High Capacity Water Separator & Fuel Filter Centralized Fuse Box Large Capacity Fuel and Hydraulic Tank Battery Master Switch Powerful and Precise Swing Control To protect the injection system and minimize the risks of fuel breakdowns, high capacity fuel filter and transparent water separator is applied for durability. Fuse box is arranged on the rear of The capacity of fuel and hydraulic The battery master switch enables Improved shock absorbing seat for easy service. tank is increased to extend the checking and maintaining the characteristics makes stopping a working time. battery while minimizing the precise and smooth action. discharge of battery. 1

8 Specifications Engine Rated flywheel horse power Model Yanmar 4TNV94L Type Water cooled, 4 cycle Diesel 4 cylinders in line, direct injection, low emission J1995 (gross) SAE J149 (net) 6271/1 (gross) DIN 6271/1 (net) Max. torque Bore x stroke Displacement Battery Starter motor Alternator 5 HP (40 kw) at 2200 rpm 52 HP (9 kw) at 2200 rpm 54 PS (9 kw) at 2200 rpm 5 PS (9 kw) at 2200 rpm 20.6 f.m (149 f.ft) at 1400 rpm 94 mm (.70") x 110 mm (4.") 054 cc (186 cu in) 1 x 12 V x 100 AH 12V-.0 kw 12V-55 A Hydraulic System Main pump Type Rated flow Sub-pump for pilot circuit Hydraulic motors Two Variable displacement piston pumps 2 x 55ὀ/min(14.5 US gpm/12 UK gpm) Gear pump Pilot pressure-operated joysticks and pedal with detachable lever provide almost effortless and fatigueless operation. Pilot control Two joysticks with one safety lever (LH): Swing and arm, (RH): Boom and bucket(iso) Traveling and steering Engine throttle Two levers with pedals Mechanical, cable type External Lights Two lights mounted on the boom one below the cab Capacity 0.07 m (0.09 yd ) 0.06 m (0.08 yd ) * 0.18 m (0.24 yd ) 0.15 m (0.20 yd ) 220 f/cm (10 psi) 220 f/cm2 (10 psi) 215 f/cm2 (060 psi) 0 f/cm2 ( 40 psi) Installed 2 Boom : Arm : Bucket : Boom swing : Dozer blade : x 65 x 715 mm (4." x 2.6" x 28.1") 1-90 x 55 x 850 mm (.5" x 2.2" x.5") 1-80 x 50 x 660 mm (.1" x 2.0" x 26.0") 1-95 x 50 x 527 mm (.7" x 2.0" x 20.7") x 50 x 191 mm (4." x 2.0" x 7.5") ᅐ 15 mm(12.4") 60 mm(14.2") 84 (185 ) ᅐ 770 mm(0.") 17 (00 ) ᅐ 705 mm(27.8") 1.6m (5'") arm Applicable for materials with density 1600 /m (2,700 /yd) or less Length * 1,600 mm (5' ") 1,900 mm (6' ") Weight 210 (460 ) 7.7 kn 850 f 9940 f 42.4 kn 40 f 9550 f 28.4 kn 2900 f 690 f 1.9 kn 260 f 7190 f 20 (510 ) 7.7 kn 850 f 9940 f 42.4 kn 40 f 9550 f Remark 25.5 kn 2600 f 570 f 28.7 kn 290 f 6460 f SAE Coolant & Lubricant Capacity liter (refilling) Fuel tank Engine coolant Engine oil Swing device-gear oil Final drive(each) Hydraulic tank Hydraulic system ISO US gal UK gal SAE SAE heaped 0.07 m (0.09 yd) Arm crowd force *0.18 m (0.24 yd) ISO * : Standard Arm(Arm weight including cylinder and linkage) Lifting Capacities R55-7 Rating over-front Rating over-side or 60 degree Boom :.0m( 9'10") Arm : 1.6m( 5' ") Bucket : 0.18 m (0.24 yd) SAE heaped Shoe : 400 mm(16 ) triple grouser shoe, the dozer blade up with 210 (460 ) Counterweight Undercarriage 5.0m (15ft) 4.0m (15ft).0m (10ft) 2.0m (5ft) 1.0m (5ft) Ground Line -1.0m (-5ft) -2.0m (-5ft) -.0m (-10ft) X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricate rollers, track adjusters with shock absorbing springs and sprockets, and track chain with triple grouser shoes. X - leg type Pentagonal box type Center frame Track frame No. of shoes on each side No. of carrier roller on each side No. of track roller on each side At max. reach Capacity Load radius Load point height m(ft) 2.0m(5ft) 4.0m(15ft).0m(10ft) 5.0m(15ft) Reach m (ft) *6500 *6500 *20 *5140 *560 *7850 *780 *80 *2100 *460 *20 * *2100 *460 *1660 *660 *220 *5110 *2670 *5890 *2660 *5860 *200 *5070 *1660 * *990 *2180 *1070 *260 *100 *2870 *1580 *480 *1770 *900 *1790 *950 *990 *2180 *1070 * *1150 *2540 *1260 *2780 * *950 *2090 *970 *2140 *1000 *2200 *1050 *210 *1090 *2400 *1140 *2510 *1170 *2580 *1140 *2510 *950 * (1.4) 5.04 (16.5) 5.57 (18.) 5.81 (19.1) 5.82 (19.1) 5.60 (18.4) 5.11 (16.8) 4.21 (1.8) Boom :.0m( 9'10") Arm : 1.6m( 5' ") Bucket : 0.18 m (0.24 yd) SAE heaped Shoe : 400 mm(16 ) triple grouser shoe, the dozer blade down with 210 (460 ) Counterweight Full hydrostatic type Axial piston motor, in-shoe design Planetary reduction gear 5,00 f (11,700 f) 4.0 km/hr (2.5 mph) / 2.2 km/hr (1.4 mph) 5ᴋ(70%) Multi-wet disc Operating Weight (approximate) Operating weight, including,000 mm (9' 6") boom, 1,600 mm (5'") arm, SAE heaped 0.18 m (0.24 yd) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment. Major component weight Upper structure Counterweight Mono boom(with arm cylinder) 5.0m (15ft) 4.0m (15ft).0m (10ft) 2.0m (5ft) 1.0m (5ft) Ground Line -1.0m (-5ft) -2.0m (-5ft) -.0m (-10ft) 2,160 ( 4,760 ) 210 ( 460 ) 10 ( 680 ) Axial piston motor Planetary gear reduction Grease - bathed Multi wet disc 9.6 rpm Operating Weight Shoes(Triple grouser) Operating weight Ground pressure mm (in) () f/cm2 (psi) 400 (15.7") 5,700 (12,570) 0.(4.69) At max. reach Capacity Load radius Load point height m(ft) NOTES 14 With side cutters Bucket digging force Swing System Swing motor Swing reduction Swing circuit lubrication Swing brake Swing speed.0m (9' 10") Boom Weight Without side cutters Arm Drives & Brakes Drive method Drive motor Reduction system Max. drawbar pull Max. travel speed(high) / (low) Gradeability Parking brake * : Standard backhoe bucket Axial piston motor with automatic brake Swing Relief valve setting Implement circuits Travel circuit Swing circuit Pilot circuit Service valve Hydraulic cylinders Width CECE heaped SAE heaped Two speed axial piston motor with counter balance valve and parking brake Travel No. of cylinderbore x rod x stroke Buckets Control 2.0m(5ft).0m(10ft) 4.0m(15ft) 5.0m(15ft) Reach m (ft) *6500 *6500 *20 *5140 *560 *7850 *780 *80 *2100 *460 *20 * *2100 *460 *1660 *660 *220 *5110 *2670 *5890 *2660 *5860 *200 * Lifting capacity are based on SAE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. *1660 * *990 *2180 *1070 *260 *100 *2870 *1580 *480 *1770 *900 *1790 *950 *990 *2180 *1070 * *1150 *2540 *1260 *2780 * *950 *2090 *970 *2140 *1000 *2200 *1050 *210 *1090 *2400 *1140 *2510 *1170 *2580 *1140 *2510 *950 * (1.4) 5.04 (16.5) 5.57 (18.) 5.81 (19.1) 5.82 (19.1) 5.60 (18.4) 5.11 (16.8) 4.21 (1.8). The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 15 Powered by TCPDF (

55-7A. Dimensions. Working Ranges. Standard Equipment

55-7A. Dimensions. Working Ranges. Standard Equipment Dimensions Unit (mm) Working Ranges Standard Equipment Boom length 3,000 mm(9' 10") Arm length 1,600 mm(5' 3") 1,900 mm(6' 3") A Max. digging reach A' Max. digging reach at ground B Max. digging depth

More information

7 SERIES MINI EXCAVATOR

7 SERIES MINI EXCAVATOR Dimensions 1,650 986 Standard Equipment 2,850 2,610 290 6,100 2,100 1,600 1,925 7 SERIES MINI EXCAVATOR ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with

More information

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT

Dimensions. Optional Equipment. MINI EXCAVATOR Applied Tier 2 Engine PLEASE CONTACT Dimensions 1,650 986 Standard Equipment Working ranges ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1

NEW 7 SERIES MINI EXCAVATOR. Yanmar 4TNV94L Engine. Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) R55W-7_taal_en :20 Pagina 1 R55W-7_taal_en 05-09-2005 15:20 Pagina 1 NEW 7 SERIES MINI EXCAVATOR Yanmar 4TNV94L Engine 42kW/57HP Operating weight 5,450 (12,020 ) Bucket capacity, SAE 0.07~0.18m 3 (0.09~0.24yd 3 ) Photo may include

More information

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side.

CONTROL. No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. SPECIFICATIONS ENGINE Maker / Model Type Rated flywheel horse power SAE DIN Perkins 1204F Water-cooled, 4-cycle diesel, 4-cylinder inline, Direct injection, Turbocharged, Charge and air cooled J1995 (gross)

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 Specifications R145LCR-9A ENGINE MODEL Type PERKINS 1204E Water cooled, 4 cycle Diesel, 4-Cylinders in line, direct injection, turbocharged,

More information

Specif ications R125LCR-9A

Specif ications R125LCR-9A Specif ications R125LCR-9A ENGINE MODEL PERKINS 1204E Water cooled, 4 cycle Diesel, 4-cylinders Type in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel horse power

More information

Dimensions & Working Range

Dimensions & Working Range We build a better future Dimensions & Working Range R35Z-9 Dimensions With Tier 4 Engine installed mm (ft.in) A B C D E F Overall width of upper structure Overall width of cab Overall height of cab Tail

More information

With Tier 4 Interim Engine installed. hyundai heavy industries

With Tier 4 Interim Engine installed. hyundai heavy industries With Tier 4 Interim Engine installed hyundai heavy industries 1 Pride at Work Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed. * Photo may include optional equipment.

HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed. * Photo may include optional equipment. STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level Ⅰ) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield

More information

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment

HYUNDAI MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed. *Photo may include optional equipment With Tier 4 Interim Engine installed MOVING YOU FURTHER hyundai heavy industries *Photo may include optional equipment HYUNDAI CONSTRUCTION EQUIPMENT AMERICAS, INC. Pride at Work Hyundai Heavy Industries

More information

STANDARD EQUIPMENT MOVING YOU FURTHER OPTIONAL EQUIPMENT HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed

STANDARD EQUIPMENT MOVING YOU FURTHER OPTIONAL EQUIPMENT HYUNDAI HEAVY INDUSTRIES. With Tier 4 Final Engine installed STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front

More information

MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed Rev 0

MOVING YOU FURTHER. hyundai heavy industries. With Tier 4 Interim Engine installed Rev 0 Standard Equipment ISO standard cabin Cabin ROPS(ISO 3471) FOG(ISO 10262 LevelI) FOPS(ISO 3449) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving

More information

Tool kit Long Arm (1.35m, 4'5") Heater & Defroster Lever pattern change valve Additional CWT

Tool kit Long Arm (1.35m, 4'5) Heater & Defroster Lever pattern change valve Additional CWT STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 3471) TOPS(ISO 12117) FOPS(ISO 3449) FOG(ISO 10262 Level I) All-weather steel cab with all-around visibility Safety glass windows Sliding fold-in front

More information

Standard Equipment. We build a better future. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

Standard Equipment. We build a better future. With Tier 4 Interim Engine installed. *Photo may include optional equipment. Standard Equipment We build a better future ISO standard cabin Cabin ROPS(ISO 12117-2) FOPS(ISO 3449) FOG(ISO 10262 Level ) All-weather steel cab with all-around visibility Safety glass windows Rise-up

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. We build a better future. *Photo may include optional equipment Rev.

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. We build a better future. *Photo may include optional equipment Rev. We build a better future STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 106 Level I) TOPS(ISO 1117) Centralized monitoring Gauges Fuel level gauge Engine coolant temperature

More information

The print quality of this copy is not an accurate representation of the original.

The print quality of this copy is not an accurate representation of the original. We build a better future Equipped with Tier 3a engine *Photo may include optional equipment. Pleasure works an operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. *Photo may include optional equipment Rev. 0

STANDARD EQUIPMENT OPTIONAL EQUIPMENT. *Photo may include optional equipment Rev. 0 STANDARD EQUIPMENT ISO standard canopy Canopy ROPS(ISO 3471) FOPS(ISO 3449) FOG(ISO 10262 Level I) TOPS(ISO 12117) Centralized monitoring Gauges Fuel level gauge OPTIONAL EQUIPMENT Engine coolant temperature

More information

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, optimal

More information

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Final Engine installed HYUNDAI HEAVY INDUSTRIES PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance, more

More information

Specifications R220LC-9A / R220NLC-9A

Specifications R220LC-9A / R220NLC-9A Specifications R220LC9A / R220NLC9A ENGINE MODEL Type CUMMINS QSB6.7 Water cooled, 4 cycle Diesel, 6Cylinders in line, direct injection, turbocharged, charged air cooled and low emission Rated flywheel

More information

We build a better future

We build a better future We build a better future * Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine may vary according to International standards. * The photos may include

More information

Quick coupler Rubber crawler (450 mm, 1 6 ) Narrow bucket (0.14m 3, 0.18yd 3 ) Long arm (2.2m, 7' 3") Tool kit Operator suit

Quick coupler Rubber crawler (450 mm, 1 6 ) Narrow bucket (0.14m 3, 0.18yd 3 ) Long arm (2.2m, 7' 3) Tool kit Operator suit STANDARD EQUIPMENT ISO standard cabin Cabin ROPS(ISO 12117-2) FOG(ISO 10262 Level I) TOPS(ISO 12117) All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper

More information

NEW 7A SERIES. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT

NEW 7A SERIES. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 250LC-7A PLEASE CONTACT Standard Equipment Optional Equipment Robex 250LC-7A ISO standard cab All-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries

More information

We build a better future

We build a better future We build a better future Equipped with Tier Engine *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite technology, provides our customers

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. BUILT FOR MAXIMUM POWER, PERFORMANCE AND RELIABILITY. Hyundai Heavy Industries enters a new chapter in construction

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. *Photo may include optional equipment. Hi-mate, Hyundai s newly developed remote management system, using GPS-satellite

More information

WHEELED EXCAVATOR NEW 7 SERIES. Tier II Engine. CUMMINS B5.9-C Engine : Operating Weight(STD) : 124 kw / 166 HP 20,500 kg (45,200 lb)

WHEELED EXCAVATOR NEW 7 SERIES. Tier II Engine. CUMMINS B5.9-C Engine : Operating Weight(STD) : 124 kw / 166 HP 20,500 kg (45,200 lb) R200W-7_taal_en 26-08-2005 14:29 Pagina 1 NEW 7 SERIES WHEELED EXCAVATOR CUMMINS B5.9-C Engine : Operating Weight(STD) : 124 kw / 166 HP 20,500 (45,200 ) Bucket Capacity, SAE : 0.51 ~ 1.34 m 3 (0.67 ~

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment

40,7 kw / 54,6 Hp at rpm kg mm DX80R. Compact Equipment 40,7 kw / 54,6 Hp at 2.000 rpm 8.330 kg 4.180-4.675 mm DX80R Compact Equipment Doosan DX80R hydraulic excavator: a new model with novel features The new DX80R hydraulic excavator offers additional value

More information

37,6 kw / 50,4 Hp at rpm kg mm DX60R. Compact Equipment

37,6 kw / 50,4 Hp at rpm kg mm DX60R. Compact Equipment 37,6 kw / 50,4 Hp at 2.200 rpm 5.875 kg 3.725-4.145 mm DX60R Compact Equipment Doosan DX60R hydraulic excavator: a new model with novel features The new DX60R hydraulic excavator offers additional value

More information

*Photo may include optional equipment. Equipped with Tier 3 Engine

*Photo may include optional equipment. Equipped with Tier 3 Engine *Photo may include optional equipment. Equipped with Tier 3 Engine Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy Industries do everything

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator

TXC 225LC-1 HYDRAULIC EXCAVATOR TXC 225LC-1. Hydraulic Excavator Hydraulic Excavator OPERATING WEIGHT NET ENGINE POWER MAX DIG DEPTH MAX REACH 47,400 lbs (21,500 kg) 148 hp (110 kw) @ 1,950 rpm 21' 9" (6,630 mm) 32' 6" (9,910 mm) HYDRAULIC EXCAVATOR FEATURES Powerful,

More information

NEW 7 SERIES. Tier II Engine CRAWLER EXCAVATOR ROBEX 320LC-7

NEW 7 SERIES. Tier II Engine CRAWLER EXCAVATOR ROBEX 320LC-7 ROBEX 320LC-7 Standard Equipment ISO standard cab!all-weather steel cab with all-around visibility!safety glass windows!rise-up type windshield wiper!sliding fold-in front window!sliding side window!lockable

More information

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP

More information

*Photo may include optional equipment. We build a better future

*Photo may include optional equipment. We build a better future *Photo may include optional equipment. We build a better future Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy Industries do everything we

More information

Doosan Infracore DX55W TECHNICAL DATA

Doosan Infracore DX55W TECHNICAL DATA Doosan Infracore Construction Equipment DX55W TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Yanmar 4TNV98-E NUMBER OF CYLINDERS 4 RATED FLYWHEEL POWER hp / rpm 56.8 / 2,400 (hp PER SAE

More information

DX140LC TECHNICAL DATA

DX140LC TECHNICAL DATA DX140LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 98.6 / 1,850 (hp PER SAE J1995) GROSS

More information

DX420LC TECHNICAL DATA

DX420LC TECHNICAL DATA DX420LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DV11 Diesel, Tier III Certified NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 293 / 1,800 (hp PER SAE J1995) GROSS kw

More information

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type SPCIICTIONS NGIN Maker / Model Type Rated flywheel horse power S DIN Scania DC13 084c 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 444 HP (331 kw) at 1,900 rpm J1349 (net) 424 HP

More information

STANDARD EQUIPMENT OPTIONAL EQUIPMENT

STANDARD EQUIPMENT OPTIONAL EQUIPMENT STANDARD EQUIPMENT OPTIONAL EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window

More information

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES

With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES 1 PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving equipment to give every operator maximum performance,

More information

EC140B LC VOLVO EXCAVATOR

EC140B LC VOLVO EXCAVATOR VOLVO EXCAVATOR EC140B LC Engine power, gross: 73 kw 98 hp Operating weight: 13.4 ~ 15.2 t 29,529 ~ 33,450 lb Buckets (SAE): 600 ~ 975 l 0.78 ~ 1.28 yd 3 Turbocharged Volvo diesel engine with direct injection

More information

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type

No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side. Type SPIITIONS NGIN Maker / Model Type Rated flywheel horse power S DIN ummins QSL9 4-cycle turbocharged, charge air cooled diesel engine J1995 (gross) 267 kw (359 HP) at 1,650 rpm J1349 (net) 257 kw (344 HP)

More information

40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment

40,8 kw / 54,7 Hp at rpm kg mm. DX55w. Compact Equipment 40,8 kw / 54,7 Hp at 2.400 rpm 5.550 kg 3.495-3.795 mm DX55w Compact Equipment Doosan DX55w hydraulic excavator: a new model with novel features The new DX55w hydraulic excavator offers additional value

More information

15.8 kw / 21.2 Hp at 2200 rpm 2790 kg mm kw / 24.3 Hp at 2400 rpm 3180 kg mm. DX27z - DX30z.

15.8 kw / 21.2 Hp at 2200 rpm 2790 kg mm kw / 24.3 Hp at 2400 rpm 3180 kg mm. DX27z - DX30z. 15.8 kw / 21.2 Hp at 2200 rpm 2790 kg 2490-2690 18.1 kw / 24.3 Hp at 2400 rpm 3180 kg 2838-2948 - Compact Equipment DOOSAN & hydraulic excavators: two new models with novel features The new & (zero tail

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 129 kw (173 HP) at 1,950 rpm Gross Power SAE J1995 / 136 kw (183 HP) at 1,950 rpm Travel Speed

More information

301.5, 301.6, Mini Hydraulic Excavator

301.5, 301.6, Mini Hydraulic Excavator 301.5, 301.6, 301.8 Mini Hydraulic Excavator 301.5 301.6 301.8 Cat 3003 Naturally Aspirated Diesel Engine Flywheel Power 13 kw 17.4 hp 13 kw 17.4 hp 13 kw 17.4 hp Operating Weight With canopy 1616 kg 3563

More information

We build a better future

We build a better future STANDARD EQUIPMENT ISO Standard cabin All-weather steel cab with 360 0 visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window(lh) Lockable door Hot

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed HYUNDAI HEAVY INDUSTRIES MOVING YOU FURTHER *Photo may include optional equipment. 330LC-9A(resized).indd 2 1/11/2013 1:54:28 PM PRIDE AT WORK Hyundai Heavy Industries

More information

EC210B LC EC210B NC/EC210B NLC

EC210B LC EC210B NC/EC210B NLC VOLVO EXCAVATOR EC210B LC EC210B NC/EC210B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 119 kw (159 hp) Operating weight: LC: 21,3 ~ 22,3 t NC: 20,9 ~ 21,8 t NLC: 21,5 ~ 22,2 t Buckets (SAE): 750 ~

More information

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb

HYDRAULIC EXCAVATOR PC308USLC-3 308US. NET HORSEPOWER 134 kw rpm OPERATING WEIGHT kg 70,383 73,146 lb NET HORSEPOWER 134 kw 179 HP @ 2050 rpm OPERATING WEIGHT 31925 33178 kg 70,383 73,146 lb PC308USLC-3 BUCKET CAPACITY 0.74 1.87 m 3 0.97 2.45 yd 3 PC 308US LC Photo may include optional equipment. HYDRAULIC

More information

250LC-7 / 250NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 250LC-7 PLEASE CONTACT

250LC-7 / 250NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 250LC-7 PLEASE CONTACT Robex 250LC7 Standard Equipment ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window Lockable

More information

350 MH. Material Handler

350 MH. Material Handler 0 MH Material Handler The Cat 0 Material Handler is specifically designed for the scrap and material handling customer. This machine uses the most sophisticated manufacturing technology to ensure the highest

More information

Mini Hydraulic Excavator

Mini Hydraulic Excavator 302.5 Mini Hydraulic Excavator Cat 3013 Naturally Aspirated Diesel Engine Flywheel Power 17.1 kw 22.9 hp Operating Weight With canopy 2660 kg 5864 lb With cab 2783 kg 6135 lb 302.5 Mini Hydraulic Excavator

More information

303 CR. Mini Hydraulic Excavator

303 CR. Mini Hydraulic Excavator 303 CR Mini Hydraulic Excavator Engine Power Gross 20.2 kw 27.1 hp Net 19.5 kw 26.1 hp Maximum Operating Weight With cab 3420 kg 7524 lb With canopy 3330 kg 7326 lb 303 CR Mini Hydraulic Excavator Designed

More information

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR

EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM. more care. built in. VOLVO EXCAVATOR VOLVO EXCAVATOR EC240B Lc EC240B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 134 kw (180 hp) Operating weight: LC: 24.2 ~ 25.8 t NLC: 24.8 ~ 25.7 t Turbocharged VOLVO diesel engine with water cooling,

More information

We build a better future

We build a better future We build a better future Equipped with Tier 3 Engine *Photo may include optional equipment. Pleasure works An operator, who takes pleasure in his work, does a better job. That is why we at Hyundai Heavy

More information

305 CR. Mini Hydraulic Excavator

305 CR. Mini Hydraulic Excavator 305 CR Mini Hydraulic Excavator Engine Power Gross 32 kw 43 hp Net 31.3 kw 42 hp Maximum Operating Weight With cab 4990 kg 11,000 lb With canopy 4940 kg 10,890 lb 305 CR Mini Hydraulic Excavator Designed

More information

Doosan Infracore DX700LC TECHNICAL DATA

Doosan Infracore DX700LC TECHNICAL DATA Doosan Infracore Construction Equipment DX700LC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ISUZU AH6WG1XYSC01 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 463 / 1,800 (GROSS)

More information

500LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 500LC-7A PLEASE CONTACT

500LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 500LC-7A PLEASE CONTACT Standard Equipment Optional Equipment ROBEX 500LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding

More information

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM

EC160B NLC VOLVO EXCAVATOR MONOBLOCK/2-PIECE BOOM VOLVO EXCAVATOR EC160B LC EC160B NLC MONOBLOCK/2-PIECE BOOM Engine power, gross: 90 kw (121 hp) Operating weight: LC: 16.6 ~ 18.4 t NLC: 16.5 ~ 18.3 t Buckets (SAE) 775 ~ 1,225 l Turbocharged VOLVO diesel

More information

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0

HYDRAULIC EXCAVATOR. PC210LC-8M0 Super Long Front PC210LC-8M0 GROSS HORSEPOWER 110 KW 147 HP NET HORSEPOWER 103 KW 138 HP OPERATING WEIGHT 23,350 kg MAX HORIZONTAL REACH 15,240 mm Super Long Front PC 210 HYDRAULIC EXCAVATOR H Y D R A U L I C E X C A V A T O R WALK

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed 5.5 km/hr (3.4 mph) / 3.3 km/hr (2.1 mph)

More information

290LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 290LC-7A PLEASE CONTACT

290LC-7A. CRAWLER EXCAVATOR Applied Tier 3 Engine. Robex 290LC-7A PLEASE CONTACT Standard Equipment Optional Equipment Robex 290LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding

More information

TB240 COMPACT EXCAVATOR. Operating Weight: 4,070 kg. From World First to World Leader

TB240 COMPACT EXCAVATOR. Operating Weight: 4,070 kg. From World First to World Leader COMPACT EXCAVATOR TB240 From World First to World Leader Operating Weight: 4,070 kg Product Features & Specifications ENGINE - Machine Models 124000003 or Later: EU Stage III A / EPA Tier 4 Emission Compliant

More information

We build a better future

We build a better future STANDARD EQUIPMENT optional EQUIPMENT We build a better future ISO Standard cabin All-weather steel cab with 360 O visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): ~ l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 45,1 ~ 47,9 t Buckets (SAE): 1 800 ~ 3 775 l Turbocharged VOLVO diesel engine with direct injection and charged air cooler

More information

TOUGH WORLD. TOUGH EQUIPMENT.

TOUGH WORLD. TOUGH EQUIPMENT. Engine Yanmar 4TNV98 Net Power 44.5 kw (60 hp) Operating Weight 7,500 kg Bucket Capacity 0.32 m³ 908E EXCAVATOR TOUGH WORLD. TOUGH EQUIPMENT. 1 MAXIMIZE YOUR RETURN ON INVESTMENT POWERFUL ENGINE The 908E

More information

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version ZAXIS-3 series Short-tail-swing version HYDRAULIC EXCAVATOR Model Code: ZX29U-3 Engine Rated Power: 19.7 kw (26.4 HP) Operating Weight: 3 060-3 230 kg Backhoe Bucket: 0.08 m 3 Advances in Hitachi Design

More information

COMPACT HYDRAULIC EXCAVATOR

COMPACT HYDRAULIC EXCAVATOR OPERATING WEIGHT,780 kg 3,20 lb 2,55 kg,750 lb 2,80 kg 6,3 lb 3, kg 6,20 lb 3,575 kg 7,880 lb,755 kg 0,80 lb 5,60 kg,380 lb COMPACT HYDRAULIC EXCAVATOR C OMPACT H YDRAULIC E XCAVATOR WALK-AROUND OPERATING

More information

With Tier 4 final / Stage III B Engine installed

With Tier 4 final / Stage III B Engine installed With Tier 4 final / Stage III B Engine installed *Foto kan optionele uitrusting omvatten. Net Power SAE J1349 / 53 kw (71 HP) at 2,200 rpm Gross Power SAE J1995 / 55 kw (74 HP) at 2,200 rpm Travel Speed

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 230 HP (171 kw) at 1,950 rpm Gross Power SAE J1995 / 242 HP (180 kw) at 1,950 rpm Travel Speed

More information

7. 5 M E T R I C T O N EXCAVATOR C 7 5 C

7. 5 M E T R I C T O N EXCAVATOR C 7 5 C 7. 5 M E T R I C T O N C EXCAVATOR Specifications Engine Type................................... Isuzu CC-4JG1 naturally aspirated direct-injection diesel; certified to EPA Tier 2 emissions Net Peak Power

More information

EC55D. Volvo Compact Excavators t 36.5 kw

EC55D. Volvo Compact Excavators t 36.5 kw EC55D Volvo Compact Excavators 5.4-5.63 t 36.5 kw A machine you can rely on Volvo s EC55D high quality compact excavator is designed to work harder for longer. Using high quality components and Volvo design,

More information

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment.

MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES. With Tier 4 Interim Engine installed. *Photo may include optional equipment. With Tier 4 Interim Engine installed MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES *Photo may include optional equipment. PRIDE AT WORK Hyundai Heavy Industries strives to build state-of-the art earthmoving

More information

Number of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70%

Number of rollers Top, each track 1 Bottom, each track 5 Number of shoes Triple grouser each side 39. Gradeability 70% CX75 EXCAVATOR TIER III CERTIFIED ENGINE Model Isuzu AU-4LE2X,Tier III certified Type 4-stroke turbocharged Cylinders 4 Bore/Stroke 3.35 in x 3.78 in (85 x 96 mm) Displacement 133 in 3 (2179 cc) Fuel injection

More information

800LC-7A PLEASE CONTACT. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 800LC-7A

800LC-7A PLEASE CONTACT. CRAWLER EXCAVATOR Applied Tier 3 Engine ROBEX 800LC-7A Standard Equipment Optional Equipment ROBEX 800LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding

More information

LIUGONG & DEALERS GLOBAL>>>

LIUGONG & DEALERS GLOBAL>>> LIUGONG & DEALERS GLOBAL>>> STRONG PRESENCE, SUBLIME SUPPORT LiuGong has established a solid infrastructure with over 12,000 employees worldwide, 320 dealers, 7 regional parts depots and 9 strategically

More information

800LC-7A PLEASE CONTACT. CRAWLER EXCAVATOR With Tier 3 Engine installed. Robex 800LC-7A

800LC-7A PLEASE CONTACT. CRAWLER EXCAVATOR With Tier 3 Engine installed. Robex 800LC-7A Standard Equipment Optional Equipment Robex 800LC7A ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding

More information

EQUIPMENT ENGINE HYDRAULIC SYSTEM

EQUIPMENT ENGINE HYDRAULIC SYSTEM EQUIPMENT ENGINE Model... Isuzu AI-4JJ1X Type... 4-cycle water-cooled, direct injection Aspiration... Turbocharged, intercooled No. of cylinders... 4 Rated power ISO 9249, net... 90.2 kw (121 HP) at 2

More information

Doosan Infracore DX225LL TECHNICAL DATA

Doosan Infracore DX225LL TECHNICAL DATA Doosan Infracore Construction Equipment DX225LL TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL Doosan DL06 NUMBER OF CYLINDERS 6 RATED FLYWHEEL POWER hp / rpm 155 / 1,900 (hp PER SAE J1995)

More information

DL250TC TECHNICAL DATA

DL250TC TECHNICAL DATA DL250TC TECHNICAL DATA GENERAL SPECIFICATIONS ITEMS UNIT STANDARD MODEL ea. Doosan DL06 NUMBER OF CYLINDERS ea. 6 RATED FLYWHEEL POWER hp / rpm 163 / 2,100 (GROSS) (SAE J1995) kw / rpm 121 / 2,100 RATED

More information

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version

HYDRAULIC EXCAVATOR. ZAXIS-3 series Short-tail-swing version ZAXIS-3 series Short-tail-swing version HYDRAULIC EXCAVATOR Model Code: ZX38U-3 Engine Rated Power: 21.3 kw (28.5 HP) Operating Weight: 3 790-3 960 kg Backhoe Bucket: 0.11 m 3 Advances in Hitachi Design

More information

TB138FR COMPACT EXCAVATOR. Operating Weight: 3,935 kg. From World First to World Leader

TB138FR COMPACT EXCAVATOR. Operating Weight: 3,935 kg. From World First to World Leader COMPACT EXCAVATOR TB138FR From World First to World Leader Operating Weight: 3,935 kg Product Features & Specifications ENGINE - EU Stage III A / EPA Interim Tier 4 Emission Compliant - Automatic Fuel

More information

CX135. Variable displacement axial piston design

CX135. Variable displacement axial piston design CX135 EXCAVATOR TIER III CERTIFIED ENGINE Model Type Isuzu AJ-4JJ1X, Tier III certified 4-stroke, turbocharged Cylinders 4 Bore/Stroke Displacement Fuel injection Fuel injection pump Fuel Fuel filter Cooling

More information

With Tier 4 final / Stage IV Engine installed

With Tier 4 final / Stage IV Engine installed With Tier 4 final / Stage IV Engine installed *Photo may include optional equipment. Net Power SAE J1349 / 424 HP (316 kw) at 1,900 rpm Gross Power SAE J1995 / 444 HP (331 kw) at 1,900 rpm Travel Speed

More information

305 CR. Mini Hydraulic Excavator. Stage II Compliant. Engine Power kw/42 hp. Maximum Operating Weight

305 CR. Mini Hydraulic Excavator. Stage II Compliant. Engine Power kw/42 hp. Maximum Operating Weight 305 CR Mini Hydraulic Excavator Stage II Compliant Engine Power Gross Net Maximum Operating Weight With cab With canopy 32 kw/43 hp 31.3 kw/42 hp 4990 kg 4940 kg 305 CR Mini Hydraulic Excavator Designed

More information

ZAXIS-6 series HYDRAULIC EXCAVATOR

ZAXIS-6 series HYDRAULIC EXCAVATOR ZAXIS-6 series HYDRAULIC EXCAVATOR Model code : ZX65USB 6 Engine rated power : 42.4 kw (ISO14396) Operating weight : 6 140 6 290 kg Bucket ISO heaped : 0.22 0.24 m³ ZX65USB-6 ZX65USB-6 The efficient excavator

More information

307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.

307E2. Mini Hydraulic Excavator. Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55. 307E2 Mini Hydraulic Excavator Bucket Engine Standard Bucket Size 0.33 m 3 Engine Model Cat C2.6 DI Turbo Bucket Width 854 mm Net Power 41.5 kw (55.6 hp) Gross Power @ 2,000 rpm 43 kw (57.6 hp) Weights

More information

CRAWLER EXCAVATOR Applied Tier 2 Engine ROBEX 500LC-7 PLEASE CONTACT Rev 7.

CRAWLER EXCAVATOR Applied Tier 2 Engine ROBEX 500LC-7 PLEASE CONTACT Rev 7. Standard Equipment Optional Equipment ROBEX 500LC7 ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Raiseup type windshield wiper Sliding foldin front window Sliding

More information

320LC-7 / 320NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 320LC-7 PLEASE CONTACT

320LC-7 / 320NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 320LC-7 PLEASE CONTACT Standard Equipment Optional Equipment Robex 320LC7 ISO standard cab Allweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding

More information

HITACHI ZAXIS80SB. engine rated power 39 kw / 52 HP. operating weight ZAXIS80SB : kg ZAXIS80SBLC : kg

HITACHI ZAXIS80SB. engine rated power 39 kw / 52 HP. operating weight ZAXIS80SB : kg ZAXIS80SBLC : kg HITACHI ZAXIS80SB engine rated power 39 kw / 52 HP operating weight ZAXIS80SB : 7 360-8 120 kg ZAXIS80SBLC : 7 440-8 210 kg bucket capacity SAE, PCSA heaped : 0.13-0.33 m 3 CECE heaped : 0.12-0.29 m 3

More information

44.3 kw (59.4 HP) at 2100 rpm kg mm DX85R-3. Compact Excavator

44.3 kw (59.4 HP) at 2100 rpm kg mm DX85R-3. Compact Excavator 44.3 kw (59.4 HP) at 2100 rpm 8540-8600 kg 4175-4725 mm DX85R-3 Compact Excavator All-round versatility and improved fuel efficiency Whatever your application you can rely on the DX85R-3 ideal working

More information

EC360B Lc EC360B NLC. more care. built in. VOLVO EXCAVATOR. Engine power, gross: 198 kw (265 hp) Operating weight: LC: 36.8 ~ 38.7 t LC: 36.5 ~ 38.

EC360B Lc EC360B NLC. more care. built in. VOLVO EXCAVATOR. Engine power, gross: 198 kw (265 hp) Operating weight: LC: 36.8 ~ 38.7 t LC: 36.5 ~ 38. VOLVO EXCAVATOR EC360B Lc EC360B NLC Engine power, gross: 198 kw (265 hp) Operating weight: LC: 36.8 ~ 38.7 t LC: 36.5 ~ 38.4 t Turbocharged VOLVO diesel engine with water cooling, direct injection and

More information

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l

EC460B LC VOLVO EXCAVATOR. Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l VOLVO EXCAVATOR EC460B LC Engine power, gross: 245 kw (329 hp) Operating weight: 44.5 ~ 47.9 t Buckets (SAE): 1,725 ~ 3,775 l Turbocharged VOLVO diesel engine with water cooling, direct injection and charged

More information