210LC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 210LC-7 PLEASE CONTACT

Transcription

1 Standard quipment Optional quipment Robex 0L7 ISO standard cabin llweather steel cab with allaround visibility Safety glass windows Riseup type windshield wiper Sliding foldin front window Sliding side window Lockable door Hot & cool box ccessory box & shtray omputer ided Power Optimization (New PO) system power mode, work mode, user mode uto deceleration & one touch deceleration system uto warm up system uto overheat prevention system Heater & efroster (700 Kcal/hr, 0000 TU/hr) Self diagnostic system Starting id (air grid heater), cold weather entralized monitoring L display ngine speed lock & rror code Gauges uel level gauge ngine coolant temperature gauge Hyd. oil temperature gauge Warning uel level PU ngine oil pressure ngine coolant temperature Hyd. oil temperature Low battery ir cleaner clogging Indicator Power max Preheat & ngine warmingup One touch decel oor and cab locks, one key M/M radio and US player Remote control switch Two outside rearview mirrors ully adjustable suspension seat with seat belt Slidable joystick, pilotoperated onsole box tilting system(lh.) Three front working lights lectric horn atteries ( x V x 00 H) attery master switch Removable clean out screen for oil cooler utomatic swing brake Removable reservoir tank uel prefilter with fuel warmer oom holding system rm holding system ounterweight (800, 880) Mono boom (.68m, 8 8 ) rm (.9m, 9 7 ) Track shoes (600m, 4 ) Track rail guard irconditioner (,000 kcal/hr, 0,000 TU/hr) T (ull utomatic Temperature ontrol) Sun visor for cabin inside uel filler pump (/min, 9. US gpm) eacon lamp Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Single acting piping kit (breaker, etc) ouble acting piping kit (clamshell, etc) Quick coupler ccumulator, work equipment lowering volt power outlet (4V to V converter) lectric transducer Travel alarm Various optional rms Super short arm (.00 m, 6 7 ) Short arm (.40 m, 7 0 ) Long arm (.90 m, 0 ) Various optional uckets (S heaped) Standard bucket (0.9 m,.0 yd ) Narrow bucket (0. m, 0.67 yd ) Narrow bucket (0.80 m,.0 yd ) Light duty bucket (.0 m,.44 yd ) Light duty bucket (.0 m,.7 yd ) Light duty bucket (.4 m,.7 yd ) Heavy duty bucket (0.74 m, 0.97 yd ) Heavy duty bucket (0.90 m,.8 yd ) Heavy duty bucket (.0 m,.7 yd ) RockHeavy duty bucket (0.87 m,.4 yd ) RockHeavy duty bucket (.0 m,.7 yd ) Slope fishing bucket (0.7 m, 0.98 yd ) abin OPS/OG(ISO/IS 06) OPS(alling Object Protective Structure) OG(alling Object Guard) abin Roofcover Transparent abin lights Track shoes Triple grousers shoe (700 mm, 8) Triple grousers shoe (800 mm, ) ouble grousers shoe (700 mm, 8) Lower frame under cover Pre heating system, coolant Tool kit Operator suit Special cooling ir vent type side door Louver type side door Low noise kit ngine emergency control cable Seat djustable air suspension seat djustable air suspension seat with heater Mechanical suspension seat with heater Pattern changer (pattern) Some of the Photo may include optional equipment. 0L7 RWLR XVTOR pplied Tier ngine Standard and optional equipment may vary. ontact your Hyundai dealer for more information. The machine may vary according to International standards. ll imperial measurements rounded off to the nearest pounds or inchs. PLS ONTT Rev 4.

2 NW 7 SRIS Robex 0L7 uilt for Maximum Power, Performance, Reliability. new chapter in construction equipment has now begun. Making the dream a reality. Some of the Photo may include optional equipment. 0 ROX 0L7 ROX 0L7 0

3 Operator s omfort is oremost. Wide ab xceeds Industry Standards. Operating nvironment The best working conditions in a pleasant environment. entralized control panel Horn button Option button Remote radio control Travel lever luster One touch decel button Hour meter Travel pedal ully adjustable suspension seat Safety lever Power boost button Joystick control lever ir conditioner and heater controller Rear mergency xit Window Rear xit Window is designed with easy exit for operator's safety. Visibility ven more visibility than before, for safer, more efficient operating. xcellent Ventilation Ventilation has been improved by the addition of the larger fresh air intake system, and by providing additional air flow throughout the cab. Sliding front and side windows provide improved ventilation. large sunroof offers upward visibility and additional ventilation. Low Noise esign The Robex 7 series was designed with low operation noise in mind. Hyundai engineering helps to keep interior and exterior noise levels to a minimum. The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments. n insulated diesel engine compartment with sounddamping material also reduces noise. Wide ab with xcellent Visibility The cab is roomy and ergonomically designed with low noise level and good visibility. full view front window and large rear and side windows provide excellent visibility in all directions. Highly Sensitive Joystick and asy ntrance New joystick grips for precise control have been equipped with double switches. (Left: Power boost / One touch deceleration, Right: Horn/Optional) Wide, omfortable Operating Space ll the controls are designed and positioned according to the latest ergonomic research. Reinforced pillars have also been added for greater cab rigidity. Riseup Wiper and abin Lights Raiseup wiper has enhanced for the better front view. abin Lights enhances safety by brightly lighting the surroundings during night work(optional) omfortable Operator nvironment The control levers and seat can be adjusted to provide maximum operator comfort. The seat is fully adjustable for optimum operating position, reducing operator fatigue. onsole boxes slide forward and backward for improved accessibility. The proportional pressure controls reduce unnecessary exertion while ensuring precise operation. Large windows allow excellent visibility in all directions. Smooth Travel Pedal and oot Rests Improved Intelligent isplay Instrument Panel is installed in front of RH console box. It is easy to check all critical systems with easytoread indicators. asytoreach ontrol Panels Switches and other essential controls are located near the operator. This helps keep operator movement to a minimum, enhancing control with less operator fatigue. Radio / US Player & Remote ontrol Switch Wide, omfortable Operating Space Steel over Sunroof ial Type ngine Speed Switch and Key Switch Storage box and up Holder n additional storage box and cup holder are located behind operator s seat, and it keeps food and beverages cool or hot. 04 ROX 0L7 ROX 0L7 0

4 U dvanced Hydraulic System dvanced capo system New mode control system POWR MO H mode: High power S mode: Standard power WORK MO : Heavy duty work : General work : reaker USR MO M mode: Maximum Power U mode: Memorizing Operator s Preferable Power Setting Strong and Stable Lower rame Reinforced boxsection frame is all welded, lowstress, highstrength steel. It guarantees safety and resistance against external impact when driving on rough ground and working on wet sites through high tensile strength steel panels, with highly durable upper and lower rollers and track guards. Long undercarriage incorporates heavy duty excavator style components. Xleg type center frame is integrally welded for maximum strength and durability. Increased Higher Performance UMMINS.9 NGIN The six cylinders, turbocharged, 4 cycle, charger air cooled engine is built for power, reliability, economy and low emissions. dvanced PO System The dvanced PO(omputer ided Power Optimization) system maintains engine and mutual pump power at optimum levels. Mode selections are designed for various work loads and maintaining high performance while reducing fuel consumption. eatures such as auto deceleration and power boost are included in the system. The system monitors engine speed, coolant temperature, and hydraulic oil temperature. ontained within the system are self diagnostic capabilities, which are displayed by error codes on the cluster. Self iagnosis System The PU controller diagnoses problems in the PO system caused by electric and hydraulic malfunctions and displays them on the L monitor of the cluster by error codes. This controller has the capacity to identify 48 distinct types of errors. s the information from this device, such as engine rpm, main pump delivery pressure, battery voltage, hyd. temperature, and the state of all types of electric switches, provides the operator with a much more exact state of machine operating condition. This makes the machine easier to troubleshoot when anything does go wrong. rm low Regeneration System rm flow regeneration valve provides smooth armin operation without cavitation. oom & rm Holding System The Holding valves in the main control valve prevents the boom & arm from dropping over an extended period in neutral position. One Touch eceleration When the one touch deceleration button on top of LH joystick is pushed once, the engine rpm will be immediately down to low idle rpm. ngine speed will be recovered to its preselected rpm in case the button is pushed once more. Max. low utoff System or precise control and finishing work, the Max. low utoff System reduces pump flow, thus allowing smooth operation. utomatic ngine Overheat Prevention If the engine coolant temperature gets too high, the PU controller lowers the engine speed and cools the engine. nti Restart System The new system protects the starter from restarting during engine operation, even if the operator accidentally turns the start key again. Power boost control System When the power boost system is activated, digging power increases about 0%. It is especially useful when extra power is temporarily needed, for instance, when digging hard earth and rock, or if the bucket teeth are stopped by a stubborn tree root. utomatic Warmingup System fter the engine is started, if the engine coolant temperature is low, the PU controller increases the engine speed and automatically to warm up the engine more effectively. Pump low ontrol System In neutral position: Pump flow is reduced to a minimum to eliminate power loss. In operation: Maximum pump flow is delivered to the actuator to increase the speed. With movement of the control lever, pump flow is automatically adjusted and the actuator speed can be proportionally controlled. Hydraulic amper in Travel Pedal Improved travel control ability & feeling by shock reducing when starting and stopping. Track Rail Guide & djusters urable track rail guides keep track links in place. Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing springs. Powerful and Preciser Swing ontrol Improved shock absorbing characteristics make stopping a precise and smooth action Minimization of Shock and Vibration through ab Mounting System The application of Viscous Mounting to the cabin support provides the operator with a much improved ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases. More Reliable Way To Reach Your ream. The ummins.9 engine has been designed with 40% fewer parts than the competition. That means there's less that can go wrong when you need it most. It also means fewer parts to inventory. Repairs are simplified because no special tools are needed for maintenance. The weight of the machine is reduced without sacrificing strength. The.9 engine is capable of reaching emission standards without electronic engine controls. You get a proven power plant that meets ecological concerns, without paying a premium for technology you don t need. Reinforced ucket and ucket Linkage Sealed and adjustable bucket linkage provides less wear of pins and bushes as well as silent operation. The design includes bucket link durability and anti wear characteristics. dditional reinforcement plates on cutting edge section. Reinforced bucket is made with thicker steel and additional lateral plate. 06 ROX 0L7 ROX 0L7 07

5 NW 7 SRIS Robex 0L7 Reliability & Serviceability asy to Maintain ngine omponents The cooling and preheating system are provided for optimum and immediate operation, guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility. entralized lectric ontrol ox and asy hange ir leaner ssembly lectric control box and ir cleaner are centralized in one or the same compartment for easy service. Side over with Left & Right Swing Open Type asy access to vital components gives unrestricted view of component allows easy maintenance and repair. urability of structure proven through M(inite lement Method) analysis and long term durability test. Large Tool ox for xtra Storage Highly fficient Hydraulic Pump pilot pump has been installed resulting in improved control sensitivity. Some of the Photo may include optional equipment. 08 ROX 0L7 ROX 0L7 09

6 Specifications ackhoe attachment Rated flywheel horse power ngine Model Type Max. torque ore stroke Piston displacement atteries Starting motor lternator S J99 (gross) J49 (net) IN 67/ (gross) 67/ (net) Hydraulic system Water cooled, 4 cycle iesel, 6ylinders in line, direct injection, Turbocharged, charge air cooled, Low emission 0HP (kw) /,90rpm 4HP (07kW) /,90rpm PS (kw) /,90rpm 4PS (07kW) /,90rpm 6.6f.m (4f.ft) /,00rpm 0mm (4.0in) 0mm(4.7in),880cc (9 in ) x V 00H 4V, 4.kw 4V, 70mp Main pump Type Two variable displacement piston pumps Max. flow 0/min (8. US gpm / 48.4 UK gpm) Subpump for pilot circuit Gear pump rosssensing and fuel saving pump system Hydraulic motors Two speed axial piston motor Travel with brake valve and parking brake Swing xial piston motor with automatic brake Relief valve setting Implement circuits 0 f/cm (4,690 psi) Travel 0 f/cm (4,690 psi) Power boost (boom, arm, bucket) 60 f/cm (,0 psi) Swing circuit 40 f/cm (,40 psi) Pilot circuit f/cm (00 psi) Service valve Installed Hydraulic cylinders No. of cylinderbore stroke rives & rakes rive method rive motor Reduction system ST/H Max. drawbar pull Max. travel speed(high) / (low) Gradeability Parking brake ontrol ummins.9 Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Pilot control Traveling and steering ngine throttle Lights oom: 090 mm ( ) rm: 400 mm (. 9.4 ) ucket: 0 mm ( ) ully hydrostatic type xial piston motor, inshoe design Planetary reduction gear,00 f (46,00 f). km/hr (. mph) /.4 km/hr (. mph) (70 %) Multi wet disc Two joysticks with one safety lever (LH): Swing and arm, (RH): oom and bucket(iso) Two levers with pedals lectric, ial type Two lights mounted on the boom and one in the battery box Swing system Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed oolant & Lubricant capacity (refilling) uel tank ngine coolant ngine oil Swing device inal drive(each) ST/H Hydraulic system(including tank) Hydraulic tank Undercarriage Operating weight (approximate) xial piston motor Planetary gear reduction Greasebathed Multi wet disc. rpm liter US gal UK gal Xleg type center frame is integrally welded with reinforced boxsection track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing spring and sprockets, and track chain with double or triple grouser shoes. enter frame Track frame No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of rail guard on each side X leg type Pentagonal box type 49 9 Operating weight, including 680mm (8 8 ) boom, 90m arm, S heaped 0.9m (.0 yd ) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment. Major component weight Upperstructure ounterweight oom (with rm cylinder) Operating weight,80 (,900),800 (8,80),90 (4,00) Shoes Operating weight pressure Type Width mm(in) () f/cm (psi) Triple grouser ouble grouser 600 mm (4 ) 700 mm (8 ) 800 mm ( ) 900 mm (.4 ) 700 mm (8 ) Standard equipment R0L7 R0L7 H/ R0L7 R0L7 H/ R0L7 R0L7 H/,700 (47,800),60 (,060),980 (48,460),440 (7,680),70 (49,070),70(,0) 0.46 (6.4) 0.49 (6.97) 0.40 (.69) 0.4 (6.) 0. (4.98) 0.8 (.40) R0L7,60 (49,740) 0. (4.) R0L7 H/,770 (,400) 0.4 (6.) S heaped m (yd ) S heaped apacity m (yd ) heaped 0.(0.67 ) 0.4(0.9) 0.80(.0) 0.70(0.9) 0.9(.0) 0.80(.0).0(.44) 0.96(.6).0(.7).00(.).4(.7). (.0) 0.74(0.97) 0.6(0.8) 0.90(.8) 0.80(.0).0(.7) 0.9(.0) 0.87(.4) 0.7(0.98).0(.7).00(.) 0.7(0.98) 0.6(0.8) : Standard backhoe bucket : Heavy duty : RockHeavy duty bucket : Slope finishing bucket rm ucket digging force rm crowd force uckets 0.(0.67) 0.80(.0) 0.9(.0) Length Weight S ISO S ISO Without side cutters 700(7.6) 000(9.4) 0(4.) 0(.0) 400(.) 0(6.0) 98(8.8) 070(4.0) 90(0.8) 40(44.9) 40(.) 790(70.) ackhoe ttachment mm(ft.in) () kn f f kn f f kn f f kn f f Width mm (in) With side cutters 80(.) 0(44.) 70(0.0) 440(6.7) 0(9.8) 670(6.7), (,890).4 [4.] 600 [4840] 9980 [70].0 [6.8] 00 [690] 470 [780]. [47.6] 800 [00] 040 [90] 4.[.] 400[80] 970 [4880] Weight () 70(60) 700(40) 770(700) 80(80) 80(870) 90(00) 770(700) 80(790) 890(960) 900(980) 00(70) 880(940) oom rm,400 (7 0 ) 90 (,090).4 [4.] 600 [4840] 9980 [70].0 [6.8] 00 [690] 470 [780].8 [.] 00 [0] 0 [760] 7.7 [8.4] 000 [090] 6460 [8870],000 Recommendation,400 (7 0 ), (,80).4 [4.] 600 [4840] 9980 [70].0 [6.8] 00 [690] 470 [780] 97. [0.9] 9900 [0800] 80 [80] 0.0 [0.] 000 [40] 70 [4770],680 (8 8 ),90 ( 0 ),00 (,60).4 [4.] 600 [4840] 9980 [70].0 [6.8] 00 [690] 470 [780] 79.4 [86.6] 800 [8840] 7860 [9480] 8. [9.0] 8700 [9490] 980 [090] ( 0 ) mm(ft.in) pplicable for materials with density of,000 /m (,70 / yd ) or less pplicable for materials with density of,600 /m (,700 / yd ) or less pplicable for materials with density of,00 /m (,80 / yd ) or less oom and arms are of allwelded, lowstress, fullbox section design..68m(8 8 ) mono boom and.0m,.4m (7 0 ),.9m,.90m ( 0 ) arm are available. uckets are allwelded, highstrength steel implements. igging force Note : rm weight including bucket cylinder and linkage..0(.44).0(.7) Standard arm.4(.7) 0.74(0.97) 0.87(.4) 0.7(0.98) 0.90(.8).0(.7).0(.7).0 m.40 m (7 0 ).9 m.90 m ( 0 ) Remark [ ]: Power oost 0 ROX 0L7 ROX 0L7

7 imensions & Working ranges imensions R0L7 imensions R0L7 High hassis, ', ' G G J J I K H L I K H L G H Tumbler distance Overall length of crawler clearance of counterweight Tail swing radius Rearend length Overall width of upperstructure Overall of cab Min. ground clearance Track gauge mm (ftin),60 ( 0 ) 4,440 (4 7 ),060 ( 6 ),80 (9 ),770 (9 ),700 (8 0 ), ( 7 ),90 (7 0 ) I J K L oom length rm length Overall length Overall of boom Track shoe width Overall width Standard quipment,000 9,60 ( 8 ),00 (0 6 ) 600 (4 ),990 (9 0 ),680 (8 8 ),400 (7 0 ) 9,70 ( ),0 (0 ) 700 (8 ),090 (0 ),90 9,0 ( ),990 (9 0 ) 800 ( ),90 (0 6 ) mm (ftin) ( 0 ) 9,0 ( ),480 ( ) 900 (.4 ),90 (0 0 ) G H Tumbler distance Overall length of crawler clearance of counterweight Tail swing radius Rearend length Overall width of upperstructure Overall of cab Min. ground clearance Track gauge mm (ftin),60 ( 0 ) 4,440 (4 7 ),60 (4 ),80 (9 ),770 (9 ),700 (8 0 ),00 (0 ) 660 ( ),79 (9 ) I J K L oom length rm length Overall length Overall of boom Track shoe width Overall width,000 9,640 ( 7 ),0 (0 ) Type width 600 (4 ),9 ( ),680 (8 8 ),400 (7 0 ) 9,0 ( 4 ),0 (0 7 ) Triple grouser 700 (8 ),49 ( 6 ),90 9,470 ( ),080 (0 ) 800 ( ),9 ( 0 ) mm (ftin) ( 0 ) 9,60 ( 4 ),490 ( ) ouble grouser 70 (8 ),0 ( 6 ) Standard quipment Working ranges R0L7 Working ranges R0L7 High hassis (ft) ' ' (meters) (meters) (ft) oom length rm length Max. digging reach Max. digging reach on ground Max. digging depth Max. digging depth (8' level) Max. vertical wall digging depth Max. digging Max. dumping Min. swing radius Standard quipment,000 9,40 (0 0 ) 8,960 (9 ),80 (9 ),80 (8 4 ),80 (7 4 ) 9,40 (0 0 ) 6,0 (0 9 ),70 ( 4 ),680 (8 8 ),400 (7 0 ) 9,00 ( ) 9,0 (0 7 ) 6,0 (0 ) 6,00 (9 9 ),70 (8 9 ) 9,40 (0 8 ) 6,0 ( ),740 ( ),90 9,940 ( 7 ) 9,780 ( ) 6,740 ( ) 6,0 ( 6 ) 6,0 (0 ) 9,470 ( ) 6,670 ( ),640 ( ) mm (ftin) ( 0 ) 0,90 ( 0 ) 0,770 ( 4 ) 7,70 ( 4 ) 7,80 (4 0 ) 7,40 ( 9 ) 0,0 ( ) 7,90 ( ),60 ( ) (ft) ' ' (meters) (meters) (ft) oom length rm length Max. digging reach Max. digging reach on ground Max. digging depth Max. digging depth (8' level) Max. vertical wall digging depth Max. digging Max. dumping Min. swing radius Standard quipment,000 9,40 (0 0 ) 8,90 (9 ),60 (8 6 ),90 (7 8 ),090 (6 8 ) 9,0 (0 7 ) 6,0 ( ),70 ( 4 ),680 (8 8 ),400 (7 0 ) 9,00 ( ) 9,90 (0 6 ) 6,00 (9 9 ),80 (9 ),0 (8 ) 9,0 ( ) 6,70 ( 0 ),740 ( ),90 9,940 ( 7 ) 9,740 ( ) 6,0 ( 6 ) 6,60 (0 0 ),90 (9 ) 9,660 ( 8 ) 6,860 ( 6 ),640 ( ) mm (ftin) ( 0 ) 0,90 ( 0 ) 0,70 ( ) 7,0 (4 8 ) 7,90 (4 ) 7,00 ( ) 0,00 ( 9 ) 7,480 (4 6 ),60 ( ) ROX 0L7 ROX 0L7

8 Lifting apacities Lifting capacities R0L7 *00 *8700 *60 *60 *8770 * *60 *60 *8770 *90 *60 *80 *6970 *70 *880 *8470 *900 *9890 *8960 *970 *80 *800 *60 * *40 *90 *440 *000 *40 *0 *90 *0 *640 *480 *60 *40 *90 *00 *40 *90 *440 * Rating overfront oom :.68m (8 8 ) rm :.0 m ucket : 0.9 m (.0 yd ) S heaped Shoe : 600mm(4 ) triple grouser with,800 (8,80 ) counterweight *90 *00 *940 *400 *990 *480 * *800 *880 *90 *860 *400 * *40 *000 *40 *9940 Rating overside or 60 degree apacity Reach oom :.68m (8 8 ) rm :.4 m (7 0 ) ucket : 0.9 m (.0 yd ) S heaped Shoe : 600mm(4 ) triple grouser with,800 (8,80 ) counterweight apacity Reach *80 *880 *700 *790 *90 *00 *940 *80 *880 *700 *790 *800 *800 *70 *80 *80 *7070 *9840 *690 *960 *090 *9090 *90 *00 *60 *680 *00 *8700 *040 *440 *800 * *9840 *690 *960 *090 *9090 *90 * *040 *440 *40 *7960 *70 *880 *9440 *8970 *9780 *840 *880 *680 *00 *760 *700 *740 *680 *80 *880 *890 *970 *8680 *940 *760 *6670 * *760 * *490 *940 *490 *080 *690 *40 *660 *800 *6460 *440 *60 *470 *40 *80 *860 *6060 *60 *6400 *40 *680 *80 *490 * *940 *8690 *440 *90 *460 *090 *490 *080 oom :.68m (8 8 ) rm :.9 m ucket : 0.9 m (.0 yd ) S heaped Shoe : 600mm(4 ) triple grouser with,800 (8,80 ) counterweight apacity Reach *90 *790 *90 *870 *490 *9680 *4770 * *60 *8000 *0 *7760 *40 * *400 *9480 *460 *960 *0 *0 *7080 *490 * *40 *90 *440 * *40 *760 * *440 * (.8) 7.78 (.) 8.4 (7.7) 8.74 (8.7) 8.7 (8.6) 8.4 (7.6) 7.76 (.) 6.6 (.7) 7. (.) 8.0 (6.9) 8.8 (8.9) 9. (9.9) 9.0 (9.9) 8.8 (8.9) 8.8 (6.8) 7. (.4) 7.7 (.) 8.69 (8.) 9.7 (0.4) 9. (.) 9.4 (.) 9.6 (0.4) 8.67 (8.4) 7.69 (.) 6.09 (0.0) oom :.68m (8 8 ) rm :.9 m ( 9 ) ucket : 0.9 m (.0 yd ) S heaped Shoe : 600mm(4 ) triple grouser with,800 (8,80 ) counterweight 9.0 m (0.0 ft) oom :.68m (8 8 ) rm :.0 m ucket : 0.9 m (.0 yd ) S heaped Shoe : 800mm( ) triple grouser with,800 (8,80 ) counterweight *00 *8700 *60 *60 *8770 *90 *90 *00 *940 apacity Reach *90 *00 * *60 *60 *8770 *90 *800 *800 *70 *80 *80 *7070 *9840 *690 *60 *80 *6970 *70 *880 *8470 *900 *9890 *8960 *970 *80 *800 *800 * *80 *7070 *9840 *690 *60 *80 *6970 * *40 *7960 *70 *880 *9440 *8970 *9780 *840 *880 *680 *00 *40 *90 *440 *000 *40 *0 *90 *0 *640 *480 *60 *40 *90 *00 * *490 *940 *490 *080 *690 *40 *660 *800 *6460 *440 *60 *470 *40 *90 *440 * *490 * *400 *990 *480 *060 *040 *0 *940 *8690 *440 *90 *460 *090 *490 * *800 *880 *90 *860 *400 * *40 *000 *40 *9940 oom :.68m (8 8 ) rm :.4 m (7 0 ) ucket : 0.9 m (.0 yd ) S heaped Shoe : 800mm( ) triple grouser with,800 (8,80 ) counterweight 9.0 m (0.0 ft) apacity Reach *490 *090 *7060 *60 *070 *0 *690 *490 *090 *7060 *60 *070 *0 *690 *040 *990 *00 *0980 *40 *0 *980 *480 *70 *9890 *800 *040 *990 *00 *0980 * *9890 *800 *60 *70 *770 *700 *860 *8870 *8760 *90 *80 *890 *660 *490 *60 * *70 *880 *4640 *00 *490 *00 *6070 *80 *670 *80 *90 *00 *70 * *870 *40 *670 *890 *90 *860 *80 *460 *960 *470 * apacity Reach. Lifting capacity is based on S J097, ISO Lifting capacity of the Robex Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. *870 *40 *670 *890 * *90 *40 *70 *6060 *60 *790 *40 *90 * *40 *760 *0 *7760 *60 *8000 *780 * *400 *9480 *460 *960 *90 *70 *640 *80 *70 *6000 *80 * *60 * *40 * *90 * (.) 8.94 (9.) 9.77 (.) 0.8 (.7) 0. (4.) 0. (4.) 0.7 (.7) 9.7 (.0) 8.9 (9.) 7.6 (.0) 6.64 (.8) 7.78 (.) 8.4 (7.7) 8.74 (8.7) 8.7 (8.6) 8.4 (7.6) 7.76 (.) 6.6 (.7) 7. (.) 8.0 (6.9) 8.8 (8.9) 9. (9.9) 9.0 (9.9) 8.8 (8.9) 8.8 (6.8) 7. (.4) 4 ROX 0L7 ROX 0L7

9 Lifting apacities oom :.68m (8 8 ) rm :.9 m ucket : 0.9 m (.0 yd ) S heaped Shoe : 800mm( ) triple grouser with,800 (8,80 ) counterweight apacity Reach oom :.68m (8 8 ) rm :.4 m (7 0 ) ucket : 0.9 m (.0 yd ) S heaped Shoe : 600mm(4 ) triple grouser with,800 (8,80 ) counterweight apacity Reach *80 *880 *700 *790 *80 *880 *700 *790 *960 *090 *9090 *90 *00 *60 *680 *00 *8700 *040 *440 *960 *090 *9090 *90 * *040 *440 *760 *700 *740 *680 *80 *880 *890 *970 *8680 *940 *760 *6670 *760 * *40 *80 *860 *6060 *60 *6400 *40 *680 *80 * *90 *790 *90 *870 *490 *9680 *4770 *00 * *0 *0 *7080 *490 * *4070 *8970 *40 *90 *440 *90 * *440 * (.) 8.69 (8.) 9.7 (0.4) 9. (.) 9.4 (.) 9.6 (0.4) 8.67 (8.4) 7.69 (.) 6.09 (0.0) *970 *40 *90 *0690 *970 *40 *90 *0690 *880 *9470 *70 *9480 *060 *690 *990 *0700 *880 *9470 *70 *9480 *060 *690 *990 *0700v *00 *00 *6640 *4640 *80 *7880 *8870 *90 *8940 *970 *80 *600 *40 *00 *00 *6640 *4640 *80 * *600 *40 *780 *80 *470 *00 *070 *780 *740 *60 *90 *6460 *440 *6000 *0 *780 *80 *470 *00 * *960 *870 *490 *9460 *4670 *000 *0890 *960 * *60 *800 *0 *7780 *460 *760 *800 *880 *970 *870 *40 *90 *40 *90 *40 * *460 * (.8) 8.07 (6.) 8.7 (8.7) 9.08 (9.8) 9. (9.9) 8.87 (9.) 8.0 (7.) 7. (4.0) oom :.68m (8 8 ) rm :.9 m ( 9 ) ucket : 0.9 m (.0 yd ) S heaped Shoe : 800mm( ) triple grouser with,800 (8,80 ) counterweight 9.0 m (0.0 ft) 9.0 m (0.0 ft) apacity Reach *490 *090 *7060 *60 *070 *0 *690 *490 *090 *7060 *60 *070 *0 *690 *040 *990 *00 *0980 *40 *0 *980 *480 *70 *9890 *800 *040 *990 *00 *0980 * *9890 *800 *60 *70 *770 *700 *860 *8870 *8760 *90 *80 *890 *660 *490 *60 * *70 *880 *4640 *00 *490 *00 *6070 *80 *670 *80 *90 *00 *70 * *870 *40 *670 *890 *90 *860 *80 *460 *960 *470 *080 *4780 *040 *870 *40 *670 *890 * *90 *40 *70 *6060 *60 *790 *40 *90 * *90 *70 *640 *80 *70 *6000 *80 *640 *960 * *60 *800 *90 * (.) 8.94 (9.) 9.77 (.) 0.8 (.7) 0. (4.) 0. (4.) 0.7 (.7) 9.7 (.0) 8.9 (9.) 7.6 (.0) oom :.68m (8 8 ) rm :.9 m ucket : 0.9 m (.0 yd ) S heaped Shoe : 600mm(4 ) triple grouser with,800 (8,80 ) counterweight apacity Reach *890 *9690 *0 *6740 *890 *9690 *0 *6740 *9770 *40 *8460 *860 *9600 *60 *600 *7780 *840 *80 *0670 *0 *9770 *40 *8460 *860 *9600 *60 *600 *7780 *840 *80 *0670 *0 *990 *0 *760 *6780 *8640 *900 *890 *970 *8600 *8960 *70 *640 *990 *0 *760 * *70 *640 *80 *8490 *4640 *00 *470 *060 *60 *490 *40 *60 *70 *80 *8490 *4640 * *90 *70 *60 *7980 *400 *8840 *440 *980 *480 *0600 *0890 oom :.68m (8 8 ) rm :.9 m ( 9 ) ucket : 0.9 m (.0 yd ) S heaped Shoe : 600mm(4 ) triple grouser with,800 (8,80 ) counterweight *90 *70 *60 * *0 *6900 *0 *70 *60 *740 *0 *7740 *690 *840 *880 *80 *4090 *900 *440 *90 *0 * (.8) 8.79 (8.8) 9. (0.6) 9.6 (.4) 9. (.) 9. (0.) 8.7 (8.) 7. (4.7) Lifting capacities R0L7 High hassis *8080 *780 *900 *8440 *70 *070 *8080 *780 *900 *8440 *70 *070 *0 *40 *770 *80 *80 *8760 *900 *990 *890 *9640 *8040 *770 *0 *40 *770 * *8040 *770 *470 *990 *460 *090 *0 *70 *600 *90 *6470 *460 *6480 *490 *470 *990 *460 *090 *0 * *440 *000 *4860 *070 *00 *0 Rating overfront oom :.68m (8 8 ) rm :.0 m ucket : 0.9 m (.0 yd ) S heaped Shoe : 600mm(4 ) triple grouser with,800 (8,80 ) counterweight *80 *8400 *90 *8640 *4070 *8970 *40 *970 *440 *9770 *460 *000 *4470 *980 Rating overside or 60 degree apacity Reach *80 * *4470 * (.4) 7.88 (.9) 8.49 (7.9) 8.7 (8.7) 8.7 (8.6) 8.6 (7.4) 7.64 (.) 6.4 (.0) 9.0 m (0.0 ft) 9.0 m (0.0 ft) apacity Reach *0 *490 *740 *680 *970 *40 *60 *7800 *0 *490 *740 *680 *970 *40 *60 *7800 *0900 *400 *9980 *000 *0 *4760 *80 *9940 *0 *700 *070 *0900 *400 *9980 *000 *0 *4760 *80 *9940 *0 *700 *070 *640 *40 *7870 *70 *860 *9000 *870 *90 *80 *7900 *670 *80 *640 *40 *7870 * *670 *80 *80 *840 *4760 *0490 *80 *00 *60 *490 *660 *800 *80 *80 *80 *840 *4760 * *00 *460 *690 *90 *960 *60 *40 *70 *90 *440 *970 *4740 *040 *4760 *0490. Lifting capacity is based on S J097, ISO Lifting capacity of the Robex Series does not exceed 7% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity.. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. *00 *460 *690 *90 *960 *60 *40 * *060 *440 *80 *640 *00 *780 *80 *70 *060 *440 *80 * *90 *70 *60 *840 *70 *600 *80 *680 *980 *670 *0 *0 *70 *490 *7690 *670 *8090 *90 *70 *60 * (.8) 9.06 (9.7) 9.8 (.) 0. (.9) 0.4 (4.6) 0.0 (4.4) 0. (.) 9.67 (.7) 8.78 (8.8) 7.4 (4.) ROX 0L7 6 ROX 0L7 7