250LC-7 / 250NLC-7. CRAWLER EXCAVATOR Applied Tier 2 Engine. Robex 250LC-7 PLEASE CONTACT

Transcription

1 Robex 250L-7 Standard Equipment ISO standard cab ll-weather steel cab with all-around visibility Safety glass windows Rise-up type windshield wiper Sliding fold-in front window Sliding side window Lockable door Hot & cool box ccessory box & sh-tray omputer ided Power Optimization (New PO) system 2-power mode, 3-work mode, 2-user mode uto deceleration & one touch deceleration system uto warm up system uto overheat prevention system Heater & Defroster (7,500kcal/hr, 30,000TU/hr) Self diagnostic system Starting id (air grid heater), cold weather entralized monitoring LD display Engine speed lock & Error code Gauges Fuel level gauge Engine coolant temperature gauge Hyd. oil temperature gauge Warning Fuel level heck Engine & PU Engine oil pressure Engine coolant temperature Hyd. oil temperature Low battery ir cleaner clogging Indicator Power max Preheat & Engine warming-up One touch decel Optional Equipment ir-conditioner (5000 kcal/hr, TU/hr) FT(Full utomatic Temperature ontrol) Sun visor for cabin inside Fuel filler pump (35 /min, 9.5 USgpm) eacon lamp Safety lock valve for boom cylinder with overload warning device Safety lock valve for arm cylinder Single acting piping kit (breaker, etc) Double acting piping kit (cramshell, etc) ccumulator, work equipment lowering 12 volt power outlet (24V D to 12V D converter) Electric transducer Travel alarm Various optional rms Super short arm (2.10m, 6 11 ) Short arm (2.50m, 8 2 ) Long arm (3.60m, ) Various optional uckets (SE heaped) Standard bucket (1.08 m 3, 1.41 yd 3 ) Narrow bucket (0.60 m 3, 0.78 yd 3 ) Narrow bucket (0.79 m 3, 1.03 yd 3 ) Narrow bucket (1.03 m 3, 1.35 yd 3 ) Light duty bucket (1.50 m 3, 1.96 yd 3 ) Heavy duty bucket (1.07 m 3, 1.40 yd 3 ) Heavy duty bucket (1.15 m 3, 1.50 yd 3 ) Heavy duty bucket (1.27 m 3, 1.66 yd 3 ) Heavy duty bucket (1.46 m 3, 1.91 yd 3 ) Rock-Heavy duty bucket (1.16 m 3, 1.52 yd 3 ) abin FOPS/FOG(ISO/DIS Level II) abin Roof-cover Transparent type abin lights Engine emergency control cable Track shoes Triple grousers shoe (700mm, 28 ) Triple grousers shoe (800mm, 32 ) Triple grousers shoe (900mm, 36 ) Double grousers shoe (700mm, 28 ) Door and cab locks, one key M/FM radio and US player Remote control switch Two outside rearview mirrors Fully adjustable suspension seat with seat belt Slidable joystic, pilot-operated onsole box tilting system(lh.) Three front working lights Electric horn atteries (2 x 12V x 100 H) attery master switch Removable clean out screen for Hyd. oil cooler utomatic swing brake Removable reservoir tank Fuel pre-filter oom holding system rm holding system ounterweight (4600, ) Mono boom (5.85 m, 19 2 ) rm (3.05 m, 10 0 ) Track shoes (600 mm, 24 ) Track rail guard Fuel warmer Lower frame under cover Tool kit Operator suit Special cowl ir vent type side door Low noise kit Engine emergency control cable Pre-heating system Seat djustable air suspension seat djustable air suspension seat with heater Mechanical suspension seat with heater Pattern change valve (2 patterns) RWLER EXVTOR pplied Tier 2 Engine 250L-7 / 250NL-7 *Photo may include optional equipment. Standard and optional equipment may vary. ontact your Hyundai dealer for more information. The machine may vary according to International standards. ll imperial measurements rounded off to the nearest pound or inch. PLESE ONTT Rev.8

2 HYUNDI ONSTRUTION EQUIPMENT 02 / 03 uilt for Maximum Power, Performance, Reliability. new chapter in construction equipment has now begun. Making the dream a reality. *Photo may include optional equipment.

3 Technology in ab Design TEHNOLOGY IN DESIGN 04 / Operator s omfort is Foremost. Wide ab Exceeds Industry Standards. Visibility Even more visibility than before, for safer, more efficient operating. Excellent Ventilation Ventilation has been improved by the addition of the larger fresh air intake system, and by providing additional air flow throughout the cab. Sliding front and side windows provide improved ventilation. large sunroof offers upward visibility and additional ventilation. omfortable Operator Environment The control levers and seat can be adjusted to provide maximum operator comfort. The seat is fully adjustable for optimum operating position, reducing operator fatigue. onsole boxes slide forward and backward for improved accessibility. The proportional pressure controls reduce unnecessary exertion while ensuring precise operation. Large windows allow excellent visibility in all directions. Low noise design The Robex 7 series was designed with low operation noise in mind. Hyundai engineering helps to keep interior and exterior noise levels to a minimum. The cab's noise levels have been additionally reduced by improving the door seals for the cab and engine compartments. n insulated diesel engine compartment with sound-damping material also reduces noise Wide, omfortable Operating Space Steel over Sunroof Dial Type Engine Speed Switch and Key Switch 05

4 Operating Environment OPERTING ENVIRONMENT 06 / Wide, omfortable Operating Space ll the controls are designed and positioned according to the latest ergonomic research. Reinforced pillars have also been added for greater cab rigidity. 07 Radio/US Player & Remote ontrol Switch Rise-up Wiper and abin Lights Wide ab with Excellent Visibility The cab is roomy and ergonomically designed with low noise level and good visibility. full view front window and large rear and side windows provide excellent visibility in all directions. Highly Sensitive Joystick and Easy Entrance New joystick grips for precise control have been equiped with double switches. (Left: Power boost / One touch deceleration, Right: Horn/Optional) Raise-up wiper has enhanced for the better front view. abin Lights enhances safety by brightly lighting the surroundings during night work(optional) Easy-to-Reach ontrol Panels Switches and other essential controls are located near the operator. This helps keep operator movement to a minimum, enhancing control with less operator fatigue. Minimization of Shock and Vibration through ab Mounting System The best working conditions in a pleasant environment. The application of Viscous Mounting to the cabin support provides the operator with a much improved ride. The operator work efficiency will increase as the shock and noise level in the cabin decreases. Rear Emergency Exit Window Rear Exit Window is designed with easy exit for operator's safety. Improved Intelligent Display Instrument Panel is installed in front of RH console box. It is easy to check all critical systems with easy-to-read indicators. Smooth Travel Pedal and Foot Rests Hot & ool ox The New ab has even more space for the operator. n dditional storage box is located behind operators seat, and it keeps food and beverages cool or hot. entralized control panel Horn button Option button Remote Radio control Travel lever luster One touch decel button Hour meter Travel pedal Fully adjustable suspension seat Safety lever Power boost button Joystick control lever ir onditioner and Heater controller

5 dvanced Hydraulic System Increased Higher Performance DVNED PO SYSTEM NEW MODE ONTROL SYSTEM 08 / UMMINS 5.9- ENGINE Strong and Stable Lower Frame The six cylinders, turbo-charged, 4 cycle, charger air cooled engine is built for power, reliability, economy and low emissions. Reinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough ground and working on wet sites through high tensile strength steel panels, with highly durable upper and lower rollers and track guards. Long undercarriage incoporates heavy duty excavator style components. X-leg type center frame is integrally welded for maximum strength and durability. 09 ᶀ POWER MODE H mode: High power S mode: Standard power ᶀ WORK MODE : Heavy duty work : General work : reaker ᶀ USER MODE M mode: Maximum Power U mode: Memorizing Operator s Preferable Power Setting utomatic Engine Overheat Prevention If the engine coolant temperature gets too high, the PU controller lowers the engine speed and cools the engine. nti Restart System dvanced PO System rm Flow Regeneration System The dvanced PO(omputer ided Power Optimization) system maintains engine and mutual pump power at optimum levels. Mode selections are designed for various work loads and maintaining high performance while reducing fuel consumption. Features such as auto deceleration and power boost are included in the system. The system monitors engine speed, coolant temperature, and hydraulic oil temperature. ontained within the system are self diagnostic capabilities which are displayed by error codes on the cluster. rm flow regeneration valve provides smooth arm-in operation without cavitation. Power boost control System oom & rm Holding System The Holding valves in the main control valve prevents the boom & arm from dropping over an extended period in neutral position. uto Deceleration System When remote-control valves are in neutral position more than 4 seconds, PU controller reduces engine speed to 1200rpm. This decreases fuel consumption and reduced cab noise levels. Self Diagnosis System The PU controller diagnoses problems in the PO system caused by electric and hydraulic malfunctions and displays them on the LD monitor of the cluster by error codes. This controller has the capacity to identify 48 distinct types of errors. s the information from this device, such as engine rpm, main pump delivery pressure, battery voltage, hyd. temperature, and the state of all types of electric switches, provides the operator with a much more exact state of machine operating condition. This makes the machine easier to troubleshoot when anything does go wrong. The new system protects the starter from restarting during engine operation, even if the operator accidentally turns the start key again. One Touch Decel System When the one touch decel switch is pressed, PU controller controls the accel actuator to reduce engine speed to low idle. nd then the one touch decel switch is pressed again, the engine speed recovers. Max. Flow ut-off System For precise control and finishing work, the Max. Flow ut-off System reduces pump flow, thus allowing smooth operation. When the power boost system is activated, digging power increases about 10%. It is especially useful when extra power is temporarily needed, for instance, when digging hard earth and rock, or if the bucket teeth are stopped by a stubborn tree root. utomatic Warming-up System fter the engine is started, if the engine coolant temperature is low, the PU controller increases the engine speed and automatically to warm up the engine more effectively. Pump Flow ontrol System In neutral position: Pump flow is reduced to a minimum to eliminate power loss. In operation: Maximum pump flow is delivered to the actuator to increase the speed. With movement of the control lever, pump flow is automatically adjusted and the actuator speed can be proportionally controlled. More Reliable Way To Reach Your Dream. The ummins 5.9- engine has been designed with 40% fewer parts than the competition. That means there's less that can go wrong when you need it most. It also means fewer parts to inventory. Repairs are simplified because no special tools are needed for maintenance. The weight of the machine is reduced without sacrificing strength. The 5.9- engine is capable of reaching emission standards without electronic engine controls. You get a proven power plant that meets ecological concerns, without paying a premium for technology you don t need. Track Rail Guide & djusters Durable track rail guides keep track links in place. Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing springs. Reinforced ucket and ucket Linkage Sealed and adjustable bucket linkage provides less wear of pins and bushes as well as silent operation.the design includes bucket link durability and anti wear characteristics. dditional reinforcement plates on cutting edge section. Reinforced bucket is made with thicker steel and additional lateral plate. Powerful and Precise Swing ontrol Improved shock absorbing characteristics make stopping a precise and smooth action Hydraulic Damper in Travel Pedal Improved travel control ability & feeling by shock reducing when starting and stopping.

6 Reliability & Serviceability RELIILITY & SERVIEILITY 10 / 11 Full open doors and master key system provide easy access for servicing. Handrails and foot steps are applied for safety Durability of structure proven through FEM(Finite Element Method) analysis and long term durability test. Large tool box for extra storage Side over with Left & Right Swing Open Type Highly efficient Hydraulic Pump Easy access to vital components gives unrestricted view of component allows easy maintenance and repair. pilot pump has been installed resulting in improved control sensitivity. entralized Electric ontrol ox and Easy hange ir leaner ssembly Easy to maintain engine components The cooling and preheating system are provided for optimum and immediate operation, guaranteeing longer life for the engine and hydraulic components. Servicing of the engine and hydraulics is considerably simplified due to total accessibility. Electric control box and ir cleaner are centralized in one or the same compartment for easy service. *Photo may include optional equipment.

7 Specifications ackhoe attachment Engine Rated flywheel horse power Swing system Model ummins 5.9- Type Watercooled, 4 cycle Diesel,6-ylinders in line, direct injection,turbo charged, charger air cooled, low emission J1995 (gross) J1349 (net) 6271/1 (gross) DIN 6271/1 (net) Max. torque ore ᴧ stroke Piston atteries Starting motor lternator SE 178 HP (133 kw) at 2000 rpm 163 HP (121 kw) at 2000 rpm 180 PS (133 kw) at 2000 rpm 165 PS (121 kw) at 2000 rpm 72.2 f.m(522 f.ft) at 1500 rpm 102 x 120 mm (4 x 4.7 ) 5,880 cc (359 cu in) 2 x 12 V x 100 H 24 V, 4.5kW 24 V, 70 mp Hydraulic system Main pump Type Two variable displacement piston pumps 2ᴧ224ὀ/min (59.2 US gpm / 49.3 UK gpm) Max. flow Gear pump Sub-pump for pilot circuit ross-sensing and fuel saving pump system Hydraulic motors Two speed axial piston motor with brake valve and parking brake Travel xial piston motor with automatic brake Swing Relief valve setting Implement circuits 330 f/cm2 (4690 psi) Travel 330 f/cm2 (4690 psi) Power boost (boom, arm, bucket) 360 f/cm2 (5120 psi) Swing circuit 280 f/cm2 (3982 psi) Pilot circuit 35 f/cm2 (500 psi) Service valve Installed Hydraulic cylinders oom : 2-140ᴧ1345 mm (5.5 ᴧ52.9 ) No. of cylinderrm : 1-150ᴧ1620 mm (5.9 ᴧ63.8 ) bore ᴧ stroke ucket : 1-135ᴧ1185 mm (5.3 ᴧ46.7 ) 12 / 13 uckets Swing motor Swing reduction Swing bearing lubrication Swing brake Swing speed xial piston motor Planetary gear reduction Grease-bathed Multi wet disc 12.6 rpm SE heaped m3 (yd3) oolant & Lubricant capacity (refilling) Fuel tank Engine coolant Engine oil Swing device Final drive(each) Hydraulic system(including tank) Hydraulic tank liter US gal UK gal Undercarriage X-leg type center frame is integrally welded with reinforced boxsection track frames. The undercarriage includes lubricated rollers, idlers, track adjusters with shock absorbing spring and sprocket, assembled trak chain with triple grouser shoes. enter frame Track frame No. of shoes on each side No. of carrier roller on each side No. of track roller on each side No. of track guard on each side X - leg type Pentagonal box type (0.78) 0.79 (1.03) apacity m3 (yd3) SE heaped ᵀ1.08 (1,41) 1.50 (1,96) 1.03 (1.35) Width mm (in) EE heaped Without side cutters With side cutters 0.55 (0.72) 0.70 (0.92) 0.90 (1.18) 0.95 (1.24) 1.10 (1.44) 1.30 (1.70) 0.95 (1.24) 1.00 (1.31) 1.10 (1.44) 1.28 (1.67) 1.00 (1.31) 760 (29.9) 890 (35.0) 1090 (42.9) 1130 (44.5) 1290 (50.7) 1490 (58.7) 1150 (45.3) 1210 (47.6) 1310 (51.6) 1460 (57.5) 1340 (52.8) 880 (34.6) 1010 (39.8) 1210 (47.6) 1250 (49.2) 1410(55.5) 1610 (63.4) (0.78) 0.79 (1.03) 1.03 (1.35) ᵀ 1.08 (1.41) 1.27 (1.66) 1.50 (1.96) ᶉ 1.07 (1.40) ᶉ 1.15 (1.50) ᶉ 1.27 (1.66) ᶉ 1.46 (1.91) 1.16 (1.52) ᶉ1.07(1.40) ᶉ1.27(1.66) ᶉ1.15(1.50) ᶉ1.46(1.91) Weight () Recommendation mm(ft.in) ᵀ5850 (19 2 ) oom rm 720 (1590) 790 (1740) 890 (1960) 910 (2010) 1010 (2230) 1080 (2380) 1120 (2470) 1160 (2560) 1240 (2730) 1320 (2910) 1280 (2820) 1.16 (1.52) (6 11 ) 2500 (8 2 ) 3050 (10 0 ) 3600 M M M : M pplicable for materials with density of 2,000 / m (3,370 / yd ) or less pplicable for materials with density of 1,600 / m3 (2,700 / yd3) or less : pplicable for materials with density of 1,100 / m3 (1,850 / yd3) or less ᵀ: Standard backhoe bucket ᶉ: Heavy-duty : Rock-Heavy duty bucket 3 3 : rms oom and arms are of all-welded, low-stress, full-box section design mm(19 2 ) mono boom and mm(6 11 ), 2500 mm(8 2 ), 3050 mm(10 0 ), 3600 mm, arms are available. uckets are all-welded, high-strength steel implements. Operating weight (approximate) Operating weight, including 5850mm (19 2 ) boom, 3050m (10 0 ) arm, SE heaped 1.08m3 (1.41 yd3) backhoe bucket, lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment. Major component weight Drives & rakes Drive method Drive motor Reduction system Max. drawbar pull Max. travel speed(high) / (low) Gradeability Parking brake Fully hydrostatic type xial piston motor, in-shoe design Planetary reduction gear f (47600 f) 5.5 km/hr (3.4 mph) / 3.5 km/hr (2.2 mph) 35ᴋ(70 %) Multi wet disc ontrol Pilot pressure operated joysticks and pedals with detachable lever provide almost effortless and fatigueless operation. Pilot control Two joysticks with one safety lever (LH): Swing and arm, (RH): oom and bucket(iso) Traveling and steering Engine throttle External Lights Two levers with pedals Electric, Dial type Two lights mounted on the boom one under the battery box Upperstructure ounterweight oom (with rm cylinder) 5520 (12170 ) 4600 (10140 ) 2280 (5030 ) Triple grouser Double grouser Shoes Width mm(in) Operating weight () pressure f / cm2(psi) ᵀ600 (24) R250NL-7 H/ 25,200(55,600) 25,100(55,300) 27,450(60,520) 0.51(7.25) 0.51(7.25) 0.53(7.54) 700 (28) H/ 25,500(56,200) 28,020(61,770) 0.44(6.26) 0.46(6.54) 800 (32) H/ 25,800(56,900) 28,400(62,610) 0.39(5.55) 0.41(5.83) 900 (36) 26,100(57,500) 0.35(4.98) 700 (28) H/ 28,620(63,100) 0.46(6.54) ᵀStandard equipment 3600mm (11ᴯ10ᴰ) Digging force Operating weight Type ᵀ3050mm (10ᴯ0ᴰ) mm (6ᴯ11ᴰ) 2500mm (8ᴯ2ᴰ) rm ucket digging force rm crowd force Length Weight mm(ft.in) () (6 11 ) 1330 (2930) 2500 (8 2 ) 1360 (3000) ᵀ3050 (10 0 ) 1450 (3200) (3350) SE kn f f [171.2] [17450] [38480] [171.2] [17450] [38480] [171.2] [17450] [38480] [171.2] [17450] [38480] ISO kn f f [194.7] [19850] [43770] [194.7] [19850] [43770] [194.7] [19850] [43770] [194.7] [19850] [43770] SE kn f f [147.6] [15050] [33190] [142.3] [14510] [31990] [125.2] [12760] [28130] [127.3] [12980] [28610] ISO kn f f [153.0] [15600] [34400] [146.6] [14950] [32950] [129.4] 1 [13200] [29110] [131.6] [13420] [29590] Note : rm weight including bucket cylinder and linkage. Remark [ ]: Power oost ᵀStandard arm

8 Dimensions & Working ranges 14 / Dimensions / R250NL-7 15 Dimensions High hassis E G J F D, D' K H L I D D E F G H Tumbler distance R250NL-7 Overall length of crawler clearance of counterweight Tail swing radius Rear-end length Overall width of upperstructure Overall of cab Min. ground clearance Track gauge R250NL (12 7 ) (12 7 ) (15 3 ) (3 8 ) (9 9 ) (9 11 ) (9 11 ) (9 10 ) (1 7 ) (8 6 ) (7 10 ) ᵀ5850 (19 2 ) oom length rm length (6 11 ) 2500 (8 2 ) ᵀ3050 (10 0 ) 3600 I Overall length (33 0 ) (32 10 ) 9920 (32 7 ) 9910 (32 6 ) J Overall of boom 3530 (11 7 ) 3590 (11 9 ) 3220 (10 7 ) 3590 (11 9 ) K Track shoe width ᵀ600 (24 ) 700 (28 ) 800 (32 ) 900 (36 ) L Overall width 3180 (10 5 ) 3280 (10 9 ) 3380 (11 1 ) 3480 (11 5 ) R250NL (9 9 ) D D E F G H Tumbler distance Overall length of crawler clearance of counterweight Tail swing radius Rear-end length Overall width of upperstructure Overall of cab Min. ground clearance Track gauge 4030 (13 3 ) 4940 (16 2 ) 1470 (4 10 ) 2965 (9 9 ) 2870 (9 5 ) 2840 (9 4 ) 3345 (10 12 ) 765 (2 6 ) 2790 (9 2 ) ᵀ5850 (19 2 ) oom length rm length (6 11 ) 2500 (8 2 ) ᵀ3050 (10 6 ) 3600 I Overall length (33 0 ) 9970 (32 9 ) 9760 (32 0 ) 9930 (32 7 ) J Overall of boom (12 4 ) 3240 (10 8 ) 3620 (11 11 ) K Track shoe width ᵀ600 (23.6 ) 700 (27.6 ) 800 (31.5 ) 900 (35.4 ) L Overall width 3390 (11 1 ) 3490 (11 5 ) 3590 (11 9 ) 3690 (12 1 ) ᵀStandard Equipment ᵀStandard Equipment Working ranges / R250NL-7 Working ranges High hassis ᵀ5850(19 2 ) oom length ᵀ5850(19 2 ) oom length rm length (6 11 ) 2500 (8 2 ) ᵀ3050 (10 0 ) 3600 rm length (6 11 ) 2500 (8 2 ) ᵀ3050 (10 6 ) 3600 Max. digging reach 9550 (31 4 ) 9870 (32 5 ) (34 0 ) (35 8 ) Max. digging reach 9550 (31 4 ) 9870 (32 5 ) (33 12 ) (35 8 ) Max. digging reach on ground 9360 (30 9 ) 9680 (31 9 ) (33 5 ) (35 1 ) Max. digging reach on ground 9280 (30 5 ) 9160 (31 6 ) (33 2 ) (34 11 ) Max. digging depth 6050 (19 10 ) 6450 (21 2 ) 7000 (23 0 ) 7550 (24 9 ) Max. digging depth 5680 (18 8 ) 6080 (19 11 ) 6630 (21 9 ) 7180 (23 7 ) Max. digging depth (8' level) 5840 (19 2 ) 6260 (20 6 ) 6830 (22 5 ) 7400 (24 3 ) Max. digging depth (8' level) 5470 (17 11 ) 5890 (19 4 ) 6460 (21 2 ) 7030 (23 1 ) Max. vertical wall digging depth 5480 (18 0 ) 5640 (18 6 ) 6150 (20 2 ) 6830 (22 5 ) Max. vertical wall digging depth 5120 (16 10 ) 5300 (17 5 ) 5790 (18 12 ) 6470 (21 3 ) D Max. digging 9450 (31 0 ) 9460 (31 0 ) 9670 (31 9 ) 9920 (32 7 ) D Max. digging 9820 (32 3 ) 9840 (32 3 ) (32 11 ) (33 9 ) E Max. dumping 6360 (20 10 ) 6420 (21 1 ) 6630 (21 9 ) 6860 (22 6 ) E Max. dumping 6730 (22 1 ) 6790 (22 3 ) 7000 (22 12 ) 7220 (23 8 ) F Min. swing radius 4420 (14 6 ) 4200 (13 9 ) 3980 (13 1 ) 3900 (12 10 ) F Min. swing radius 4140 (13 7 ) 4030 (13 3 ) 3940 (12 11 ) 3900 (12 10 ) ᵀStandard Equipment ᵀStandard Equipment

9 Lifting apacities 16 / 17 Lifting capacities - Rating over-front Rating over-side or 360 degree oom : 5.85m (19 2 ) rm : 2.10 m (6 11 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight oom : 5.85m (19 2 ) rm : 3.60 m ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight 7.5 m (25 ft) apacity Reach 7.5 m (25 ft) 9.0 m (30 ft) apacity Reach *15590 *34370 *17410 *38380 *13610 * *13610 *30000 *7950 *10440 *23020 *12520 * *12310 *27140 *9640 *21250 * *5900 *13010 *6630 *14620 *7750 * *6420 * (27.3) 8.91 (29.2) 9.17 (30.1) 9.14 (30.0) 8.80 (28.9) 8.13 (26.7) 6.98 (22.9) *9080 *20020 *9080 *20020 *12710 *28020 *11110 *24490 *13310 *29340 *16960 *37390 *18260 *40260 *12170 *28020 *11110 *24490 *13310 * *10140 *22350 *12150 * *12250 * *6010 *13250 *7400 * *4210 *9280 *4620 *10190 *5300 * *2800 *6170 *3990 * *5900 * (32.1) (33.7) (34.4) (34.3) (33.4) 9.62 (31.6) 8.71 (28.6) 7.30 (24.0) oom : 5.85m (19 2 ) rm : 2.50 m (8 2 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight m (25 ft) apacity Reach *16500 *36380 *16500 *36380 *15230 *33580 *18440 *40650 *15140 * *15140 *33380 *9730 *21450 *12000 * *12700 *28000 *10620 * *6190 *7350 * *5740 * (28.4) 9.23 (30.3) 9.48 (31.1) 9.45 (31.0) 9.13 (30.0) 8.49 (27.9) 7.41 (24.3) Lifting capacities - R250NL-7 *15590 *34370 *17410 *38380 *13610 * m (25 ft) apacity Reach *13610 *30000 *7950 *10440 *23020 *12520 * *12310 *27140 *9640 *21250 * *5900 *13010 *6630 *14620 *7750 * Rating over-front Rating over-side or 360 degree oom : 5.85m (19 2 ) rm : 2.10 m (6 11 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight *6420 * (27.3) 8.91 (29.2) 9.17 (30.1) 9.14 (30.0) 8.80 (28.9) 8.13 (26.7) 6.98 (22.9) oom : 5.85m (19 82 ) rm : 3.05 m (10 0 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight m (25 ft) apacity Reach *10020 *22090 *30090 *17980 *39640 *10020 *22090 *30090 *17980 *39640 *13880 *30600 *9530 *21010 *10660 *23500 *13980 *30820 *18590 *40980 *16880 *37210 *13880 *30600 *9530 *21010 *10660 *23500 *13980 * Lifting capacity is based on SE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. *8560 *18870 *11070 *24410 *12720 * *11570 *25510 *8560 * *5460 *12040 *6670 *14700 *7970 * *5460 * *4100 *9040 *5160 *11380 *5780 * *6060 * The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity (30.2) 9.74 (32.0) 9.98 (32.7) 9.95 (32.6) 9.65 (31.7) 9.05 (29.7) 8.06 (26.4) 6.48 (21.3) oom : 5.85m (19 2 ) rm : 2.50 m (8 2 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight m (25 ft) apacity Reach *16500 *36380 *16500 *36380 *15230 *33580 *18440 *40650 *15140 * Lifting capacity is based on SE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. *9730 *21450 *12000 * *12700 *28000 *10620 * *6190 *7350 * *5740 * The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity (28.4) 9.23 (30.3) 9.48 (31.1) 9.45 (31.0) 9.13 (30.0) 8.49 (27.9) 7.41 (24.3)

10 Lifting apacities 18 / 19 oom : 5.85m (19 2 ) rm : 3.05 m (10 0 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight oom : 5.85m (19 2 ) rm : 2.50 m (8 2 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight 7.5 m (25 ft) apacity Reach 7.5 m (25 ft) apacity Reach *10020 *22090 *30090 *17980 *39640 *10020 *22090 *30090 *17980 *39640 *13880 *30600 *9530 *21010 *10660 *23500 *13980 *30820 *18590 *40980 *16880 *37210 *13880 *30600 *9530 *21010 *10660 * *8560 *18870 *11070 *24410 *12720 * *11570 * *5460 *12040 *6670 *14700 *7970 * *4100 *9040 *5160 *11380 *5780 * *6060 * (30.2) 9.74 (32.0) 9.98 (32.7) 9.95 (32.6) 9.65 (31.7) 9.05 (29.7) 8.06 (26.4) 6.48 (21.3) *17990 *39660 *17990 *39660 *16770 *36970 *17840 *39330 *13960 *30780 *16770 *36970 *17840 *39330 *13960 *30780 *7770 *17130 *10330 *22770 *12400 *27340 *13360 *29450 *13340 *29410 *12370 *27270 *9750 *21500 *7770 * *5540 *12210 *6440 *14200 *7650 *16870 *8780 *19360 *9520 * *9020 *19890 *5540 *12210 *6440 * *5850 *12900 *6430 * *5050 * *6400 * (29.0) 9.32 (30.6) 9.50 (31.2) 9.40 (30.8) 9.01 (29.6) 8.28 (27.2) 7.07 (23.2) oom : 5.85m (19 2 ) rm : 3.60 m ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight m (25 ft) 9.0 m (30 ft) apacity Reach *9080 *20020 *9080 *20020 *12710 *28020 *11110 *24490 *13310 *29340 *16960 *37390 *18260 *40260 *12710 *28020 *11110 * *10140 *22350 *12150 * *12250 * *6010 *13250 *7400 * *4210 *9280 *4620 *10190 *5300 * *2800 *6170 *3990 * *5900 * (32.1) (33.7) (34.4) (34.3) (33.4) 9.62 (31.6) 8.71 (28.6) 7.30 (24.0) oom : 5.85m (19 2 ) rm : 3.05 m ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight *7400 *16310 *10840 *23900 *14600 * m (25 ft) apacity Reach *7400 *16310 *10840 *23900 *14600 *32190 *15600 *34390 *9380 *20680 *11330 *24980 *14940 *32940 *19040 *41980 *15600 *34390 *9380 *20680 *11330 *24980 *14940 *32940 *19040 *41980 *9200 *20280 *11560 *25490 *12950 *28550 *13340 *29410 *12790 *28200 *10980 *24210 *9200 * *5720 *12610 *6980 *15390 *8240 *18170 *9180 * *9310 *20530 *5720 * *4570 *10080 *5290 *11660 *5940 *13100 *6640 * *4570 * *4600 * * (30.7) 9.82 (32.2) 9.99 (32.8) 9.90 (32.5) 9.53 (31.3) 8.85 (29.0) 7.76 (25.5) Lifting capacities - High hassis Rating over-front Rating over-side or 360 degree oom : 5.85m (19 2 ) rm : 3.60 m ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140 ) counterweight oom : 5.85m (19 2 ) rm : 2.10 m (6 11 ) ucket : 1.08 m 3 SE heaped Shoe : 600mm(24 ) triple grouser with 4,600 (10,140) counterweight - - *17660 *38930 *16740 * m (25 ft) apacity Reach *17660 *38930 *16740 *36910 *8510 *18760 *11020 *24290 *12840 *28310 *13480 *29720 *13180 *29060 *11890 *26210 *8510 * *6020 *13270 *6870 *15150 *8020 *17680 *9060 * *8600 *18960 *6020 * *6200 *13670 *6710 * *5390 * *6310 * (27.9) 9.00 (29.5) 9.19 (30.2) 9.09 (29.8) 8.68 (28.5) 7.91 (26.0) 6.61 (21.7) m (25 ft) 9.0 m (30 ft) apacity Reach *6860 *15120 *9790 *21580 *13030 *28730 *16990 *37460 *6860 *15120 *9790 *21580 *13030 *28730 *16990 *37460 *12780 *28180 *11520 *25400 *11460 *25260 *14050 *30970 *18050 *39790 *38650 *12780 *28180 *11520 *25400 *11460 *25260 *14050 *30970 *18050 *39790 *38650 *8090 *17840 *10710 *23610 *12470 *27490 *13240 *29190 *13080 *28840 *11820 *26060 *8090 * *6340 *13980 *7720 *17020 *8820 * *8500 *18740 *6340 * *4280 *9440 *4760 *10490 *5480 * *4280 * *3150 *6940 *4200 *9260 *4810 *10600 *4500 *9920 *3150 * *4210 * *5890 * (32.5) (33.9) (34.4) (34.2) (33.0) 9.44 (31.0) 8.43 (27.7) 6.86 (22.5) 1. Lifting capacity is based on SE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity. 1. Lifting capacity is based on SE J1097, ISO Lifting capacity of the Robex Series does not exceed 75% of tipping load with the machine on firm, level ground or 87% of full hydraulic capacity. 3. The load point is a hook (standard equipment) located on the back of the bucket. 4. (*) indicates load limited by hydraulic capacity.