CRAWLER EXCAVATORS EH160 LC. Specifications.

Size: px

Start display at page:

Download "CRAWLER EXCAVATORS EH160 LC. Specifications."

Horatio Heath
5 years ago
Views:

1 CRAWLER EXCAVATORS Specifications EH160 LC

2 EH160 LC MACHINE DIMENSIONS A M C E I F L G H D K J B Standard Arm Optional Arm Arm Length 10 2 (3.10 m) 8 6 (2.60 m) A. Overall Length (8.65 m) (8.65 m) B. Overall Width (w/ 31.5 crawler shoe) (2.59 m) (2.59 m) C. Overall Height (to top of lowered boom) (2.96 m) (2.80 m) D. Base Machine Length (4.54 m) (4.54 m) E. Overall Height (to top of cab) (2.95 m) (2.95 m) F. Ground Clearance of Rear End 3 5 (1.03 m) 3 5 (1.03 m) Standard Arm Optional Arm G. Center to Center Distance of Tumblers (3.28 m) (3.28 m) H. Overall Length of Crawler (4.08 m) (4.08 m) I. Crawler Height at Tumbler Center (0.950 m) (0.950 m) J. Track Gauge (1.99 m) (1.99 m) K. Width of Crawler Shoe (0.60 m) (0.60 m) L. Ground Clearance of Undercarriage (0.48 m) (0.48 m) M.Tail Swing Radius (2.50 m) (2.50 m) Height Dimensions exclude the height of grouser bar EH160 LC WORKING RANGES D C I J E G F A B H 35 (10.66) 30 (9.14) 25 (7.62) 20 (6.10) 15 (4.57) 10 (3.05) -5 (1.52) 10-2 arm (3.1m) -10 (3.05) 8-6 arm (2.6m) -15 (4.57) Standard Arm Optional Arm Attachment 10 2 (3.10 m) 8 6 (2.60 m) A. Maximum digging reach (9.50 m) (8.98 m) B. Ground Level Reach (9.33 m) (8.81 m) C. Maximum Digging Depth (6.57 m) (6.07 m) D. Maximum Digging Height (9.62 m) (9.20 m) E. Dumping Height (6.96 m) (6.57 m) F. Minimum Dumping Clearance (2.07 m) (2.57 m) G. Maximum Vertical Wall Digging Depth (6.02 m) (5.18 m) H. Minimum Front Swing Radius (2.83 m) (2.83 m) I. Height At Minimum Front Swing Radius (7.32 m) (7.34 m) J. Digging Depth For 8 (2.4m) flat bottom (6.40 m) (5.83 m) -20 (6.10) ft (m) 35 (10.66) 30 (9.14) 25 (7.62) 20 (6.10) 15 (4.57) 10 (3.05) 5 (1.52) -25 (7.62)

3 OPERATING WEIGHTS AND WIDTH with 23.6 (600 mm) shoes: Operating weight...36,800 lb. (16,700 kg) Ground pressure psi (0.38 kg/cm 2 ) Width (2.59 m) with 31.5 (800 mm) shoes: Operating weight...38,100 lb. (17,300 kg) Ground pressure psi (0.30 kg/cm 2 ) Width (2.79 m) Bucket Capacity Range....45~1.36 yd. 3 (.34~1.04 m 3 ) ENGINE-MITSUBISHI Make and Model...4D34-TEG Displacement in. 3 (3.91 L) Bore and Stroke x 4.53 (104 x 115 mm) Horsepower-SAE Rated RPM ,200 rpm (82 2,200 rpm) WORKING FORCES 10 2 Arm Selection (3.10 m) Bucket Digging Force - SAE...24,900 lbf (11,300 kgf) Bucket Digging Force - ISO...28,000 lbf (12,700 kgf) Arm Digging Force - SAE...17,200 lbf (7,800 kgf) Arm Digging Force - ISO...17,700 lbf (8,020 kgf) 8 6 Arm Selection (2.60 m) Bucket Digging Force - SAE...24,900 lbf (11,300 kgf) Bucket Digging Force - ISO...28,000 lbf (12,700 kgf) Arm Digging Force - SAE...19,700 lbf (8,935 kgf) Arm Digging Force - ISO)...20,275 lbf (9,195 kgf) UNDERCARRIAGE Track Overall Length (4.08 m) Track Overall Width w/ Std. Shoe (2.59 m) Travel Speed...3.7/2.5 mph (6.0/4.0 km/h) Draw Bar Pull...35,100 lbf (156 kn) Gradeability...35 (0.70%) Ground Clearance...19 in. (0.48 m) SWING Swing Speed...11 rpm Swing Torque...38,722 lb. ft. (52.50 kn-m) Tail Swing Radius (2.59 m) Automatic Swing Brake...Yes SHIPPING DIMENSIONS Height (2.96 m) Width w/ Std. Shoe (2.59 m) Length (8.65 m) REFILL CAPACITIES Fuel Tank gal. (281 L) Hydraulic Reservoir gal. (143 L) Hydraulic system (including reservoir)...42 gal. (159 L) Cooling system...5 gal. (19 L) Lubrication: Engine oil...4 gal. (15 L) HYDRAULIC SYSTEM Hydraulic Pump...2VP + 1FG Rated Oil Flow...2 x gpm (2 x ) Operating Pressure Implement...4,980 psi (34.30 MPa) Travel...4,980 psi (34.50 MPa) Swing...4,050 psi (27.90 MPa) Power boost...5,470 psi (37.80 MPa) Pilot psi (4.90 MPa) Control valve...6 spool Control...Pilot Operated

4 BUCKET SELECTION Capacity (SAE) Width Bucket weight Arm length ft.-in. (m) Application yd 3 (m 3 ) in. (m) lb. (kg) 10 2 (3.1) 8 6 (2.6) General 0.45 (0.34) 20 (0.51) 1045 (474) H H 0.58 (0.44) 24 (0.61) 1120 (508) H H 0.77 (0.59) 30 (0.76) 1280 (581) M H 0.97 (0.74) 36 (0.91) 1395 (633) L M 1.16 (0.89) 42 (1.07) 1550 (703) X L 1.36 (1.04) 48 (1.22) 1710 (776) X L Heavy 0.45 (0.34) 20 (0.51) 1120 (508) H H 0.58 (0.44) 24 (0.61) 1200 (544) H H 0.77 (0.59) 30 (0.76) 1365 (619) M H 0.97 (0.74) 36 (0.91) 1485 (678) L M 1.16 (0.88) 42 (1.07) 1660 (753) X L Severe 0.56 (0.43) 26 (0.66) 1405 (637) H H 0.69 (0.53) 31 (0.79) 1540 (698) M H 0.85 (0.65) 37 (0.94) 1740 (789) L M H - Used with material weight (density) up to 3,000 lbs./yd 3 (1,780 kg/m 3 ) M - Used with material weight (density) up to 2,500 lbs./yd 3 (1,483 kg/m 3 ) L - Used with material weight (density) up to 2,000 lbs./yd 3 (1,196 kg/m 3 ) X - Not recommended

5 EH160 LC LIFTING CAPACITIES A C B Arm: 10 2 Bucket: 816 lbs. Shoes: 600mm (23.6 ) triple grouser Boom: 17 1 EXTENSION RADIUS (A) BUCKET HOOK 5 ft. 10 ft. 15 ft. 20 ft. 25 ft. HEIGHT (B) front side front side front side front side front side 20 ft. lb. *6,760 6,680 (6.1 m) kg *3,060 3, ft. lb. *8,660 6,470 *4,380 4,260 (4.6 m) kg *3,920 2,930 *1,980 1, ft. lb. *16,810 *16,810 *11,960 9,710 *9,850 6,080 *6,880 4,100 (3.0 m) kg *7,620 *7,620 *5,420 4,400 *4,460 2,750 *3,120 1,860 5 ft. lb. *24,010 16,180 *14,860 8,770 9,950 5,640 6,950 3,890 (1.5 m) kg *10,890 7,340 *6,740 3,980 4,510 2,550 3,150 1,760 Ground level lb. *8,260 *8,260 *20,830 14,960 15,120 8,100 9,550 5,280 6,750 3,720 kg *3,740 *3,740 *9,440 6,780 6,850 3,670 4,330 2,390 3,060 1,680-5 ft. lb. *13,940 *13,940 *24,630 14,690 14,760 7,790 9,340 5,090 (-1.5 m) kg *6,320 *6,320 *11,170 6,660 6,690 3,530 4,230 2, ft. lb. *20,200 *20,200 *22,970 14,870 14,760 7,800 9,350 5,100 (-3.0 m) kg *9,160 *9,160 *10,410 6,740 6,690 3,530 4,240 2, ft. lb. *27,100 *27,100 *17,050 14,450 *11,730 8,120 (-4.6 m) kg *12,290 *12,290 *7,730 7,000 *5,320 3,680 Arm: 8 6 Bucket: 992 lbs. Shoes: 600mm (23.6 ) triple grouser Boom: ft. lb. *6,190 *6,190 (6.1 m) kg *2,800 *2, ft. lb. *10,470 10,260 *9,380 6,290 (4.6 m) kg *4,750 4,650 *4,250 2, ft. lb. *19,470 17,960 *13,060 9,430 10,280 5,930 *4,830 4,000 (3.0 m) kg *8,830 8,140 *5,920 4,270 4,660 2,690 *2,190 1,810 5 ft. lb. *21,800 15,620 15,670 8,570 9,840 5,540 *6,600 3,830 (1.5 m) kg *9,890 7,080 7,110 3,880 4,460 2,510 *2,990 1,730 Ground level lb. *20,530 14,860 15,020 8,010 9,500 5,240 kg *9,310 6,740 6,810 3,630 4,310 2,370-5 ft. lb. *16,290 *16,290 *25,060 14,820 14,780 7,820 9,360 5,110 (-1.5 m) kg *7,380 *7,380 *11,360 6,720 6,700 3,540 4,240 2, ft. lb. *23,830 *23,830 *21,220 15,130 *14,800 7,910 (-3.0 m) kg *10,800 *10,800 *9,620 6,860 *6,710 3, ft. lb. *14,050 *14,050 (-4.6 m) kg *6,370 *6, Do not attempt to lift of hold any load that is greater than these rated values at their specified load radius and height. Weight of all accessories must be deducted from the above lifting capacities. 2. Lifting capacities are based on machine standing on level, firm and uniform ground. 3. User must make allowance for job conditions such as soft or uneven ground, out of level conditions, experience of personnel, etc. 4. Ratings at bucket lift hook. 5. The above rated loads are in compliance with SAE Hydraulic Excavator Lift Capacity Rating Standard J They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. 6. Rated loads are marked with an asterisk (*) are limited by hydraulic capacity rather than tipping load. 7. Operator should be fully acquainted with the operator's and Maintenance Instructions before operating this machine and rules for safe operation of equipment should be adhered to at all times. 8. Capacities apply to only machine as originally manufactured and normally equipped by NEW HOLLAND CONSTRUCTION NORTH AMERICA.

6 EH160 LC Standards & Options STANDARD SPECIFICATION MACHINE DIESEL ENGINE Mitsubishi 4D34-TEG, 4 stroke, 6 cylinder Water cooled direct injection turbo charged Diesel engine -112 SAE NET 2,200 RPM -238 cu. in displacement US EPA Tier II compliant Air intake pre-heat starting aid Air cleaner - dry type, dual element Fuel Tank: 74.2 gallons (281 liters) ELECTRICAL SYSTEM 24 Volt System Heavy duty batteries - (2x12V-80AH) Starting motor - 24V- 5KW Alternator - 35 Amp Front working lights - 2 switchable Rear working lights - 2 switchable Swing flashers - 2 switchable 24 volt to 12 volt converter with 12 volt power outlet HYDRAULIC SYSTEM Two in-line variable displacement axial piston pumps Pilot pump Hydraulic oil cooler and filter Sequenced arm recharge system Standard factory fill ISO-VG46 hydraulic oil. Boom hoist cylinders Boom and arm anti-drift valves Swing shockless valve Swing brake and Travel brake both spring applied and hydraulically released Engine and hydraulic oil warm-up TRAVEL SYSTEM Automatic two-speed travel Travel alarm Straight propel Independent travel BOOM AND ARM Boom (5.2 m) monoboom reinforced Arm (3.1 m) reinforced Rock guard Reinforcement for auxiliary hydraulics UNDERCARRIAGE Long carriage with standard 23.6 (600 mm) wide triple grouser track pads Lifetime lubricated track rollers, idlers and sprockets Grease cylinder track adjuster Master track link disassembly mechanism Long pitch tracks with strut reinforcement. Center track guides. OPERATOR STATION Die formed, modular steel full vision cab Silicon viscous mounts Sound insulated Windshield wiper and washer Lap safety belt High capacity climate controlled air conditioning and heating system AM/FM stereo radio with speakers Defroster Large capacity cup holder Cigarette lighter Ashtray Coathook Floor mat Control lever lock Storage compartment behind seat Skylight with sunshade Large exterior left and right rearview mirrors Horn Air suspension seat 7 way adjustable Two lever control for boom, arm, bucket, and swing Pilot operated semi-long controls Travel levers with foot pedals and toe tabs removable travel levers with storage area Manual engine shut off INSTRUMENTS Multi-display monitor includes System status Engine-preheat status Low engine oil pressure warning Engine coolant temperature warning Engine air cleaner restriction Battery charging system, low fuel level CPU error indicator lamp Hour meter Fuel level gauge Water temperature gauge Travel speed switch Swing brake release Low engine oil pressure buzzer indicator High engine temperature audible alarm OPERATING FEATURES Working modes - Assist (default) with "fuzzy logic" mode change responding to operator control lever movements - Manual - Breaker with in cab flow adjustment Power boost - with NO time limit Heavy lift - with NO time limit Swing priority system for trenching Auto engine decel - switchable ON/OFF - with direct return to throttle setting for reduced fuel consumption. SERVICEABILITY Large clearance between radiator and oil Advanced diagnostics - in-cab pressure / engine characteristics readout - without additional equipment Fault code monitor and history MISCELLANEOUS Counterweight - 6,629 lbs. WARRANTY New Holland Standard Warranty Applies FREIGHT AND SHIPPING POINT FOB Port of Entry Does Not Include Bucket. OPTIONAL EQUIPMENT 27.6 (700 mm) double grouser track shoes 31.5 (800 mm) triple grouser track shoes Boom and Arm load (lock) valves 45 long reach boom/arm with heavy counterweight Single pedal travel Combined one-way or two-way auxiliary hydraulics piping and valve (one or two pump) with hand controls Independent low-flow rotation auxiliary hydraulics Control pattern changer (ISO / BHL) Hydraulic oil substitution for cold or tropical climates Vandalism guards Bucket selection Quick coupler selection Design, materials and/or specifications are subject to change without notice and without liability therefor. Specifications are applicable to units sold in Canada, the United States, its territories and possessions, and may vary outside these areas. Visit our website at CNH America LLC Safety begins with a thorough understanding of the equipment. Always make sure you and your operators read the Operator s Manual before using the equipment. Pay close attention to all safety and operating decals and never operate machinery without all shields, protective devices and structures in place. Stock #NHC SS API PRINTED IN U.S.A. NEW HOLLAND CONSTRUCTION IS A BRAND OF CNH. A GLOBAL LEADER FOR CONSTRUCTION EQUIPMENT, AGRICULTURE EQUIPMENT AND FINANCIAL SERVICES.

CRAWLER EXCAVATORS EH215 LC. Specifications.

CRAWLER EXCAVATORS EH215 LC. Specifications. RAWLER EXAVATORS Specifications EH215 L www.newhollandconstruction.com EH215 L MAHINE DIMENSIONS A M E G H D I F K L J B Standard Arm Optional Arm Arm Length 9 8 (2.94 m) 11 6 (3.50 m) A. Overall Length...30