Flexible Conduit Systems for Critical Power & Data Cable Protection
|
|
- Aileen Wilkins
- 5 years ago
- Views:
Transcription
1 Flexible Conduit Systems for Critical Power & Data Cable Protection
2 Contents Applications Quality Approvals... Machine Tools... 4 Marine... Automation... 6 Multiple Applications... 7 Metallic Systems Quick Selection Guide... 8 Conduit, Fittings & Accessories Overview... 9 Adaptasteel S & SS Flexible Steel Conduit & S Fittings... 0 Adaptasteel SP, SN & LFH-SP Covered Steel Flexible Conduit & SP Fittings Adaptasteel SPL & SPLHC Covered Steel Flexible Conduit & SPL Fittings... 7 Adaptasteel SB, STC, SSB & SSBGS Specialist EMI Screen Conduit & SB Fittings Adaptasteel SPB & SPTC Specialist Liquid-Resistant, EMI Screen Conduit & SPB Fittings Adaptasteel SPLHCB Specialist Liquidtight -Strength Conduit & SPLB Fittings... 2 Accessories Locknuts, P-Clips, 90 and 4 Elbows, Proximity Switch Adapters, Female Couplers, Enlargers, Reducers & Converters Cutting Tools CUT-VICE, ROTOCUT, SWINGCUT Non-Metallic Systems Quick Selection Guide... 2 HI-SPEC Flexible Systems Technical Thread Data EMI Screen System & Fire Performance IP Ratings & Fitting Characteristics... 0 Chemical Resistance... Reference Index
3 Introduction QUALITY APPROVALS Industry Standards As a major player in the flexible conduit market, Adaptaflex has gained many international approvals. We continuously monitor our own quality levels, but we also go a step further by having our products independently tested. As a result, you don t have to just take our word for it. Third Party Testing & Approvals IEC 686 Performance Classification Standard Adaptaflex is the first major conduit manufacturer to achieve third party accreditation to the IEC 686 Standard from the British Standards Institution (BSI). IEC 686 conformance guarantees that our products meet performance specifications for fatigue life, operating temperature, non-flame propagation and IP ratings, among other criteria. IEC 686 has replaced EN0086. ISO 900 Quality Standard Adaptaflex conforms to ISO 900:2000, the internationally recognized standard for Quality Management Systems. This standard reflects the procedures and management processes throughout the whole of the company. BS EN ISO 400 Environmental Standard Controlling the impact of manufacturing activities on the environment is a major challenge. Again, Adaptaflex leads the way by being the first conduit manufacturer to comply with this standard. Compliance for the North American Market Adaptaflex products are approved by a range of recognized industry standards. We produce products specifically to meet the needs of the North Amercan market, complying with standards that include: UR Approval ASTM, Lloyds Register Approvals Protection Ratings to NEMA 6 & 6P (IP67) Product Characteristics Adaptaflex offers an extensive range of products designed for a wide range of market applications: Metallic conduit and tubing systems Comprehensive range of US Trade Sizes ( 4" 2") NPT and UNEF threads available
4 Applications MACHINE TOOLS Machine Tools Overview This market is driven by the need to meet the best in lean manufacturing. To achieve this, every piece of equipment in this sector is pushed for greater efficiency by working more intensely and faster. As a result, any conduit installed in these applications needs to provide excellent mechanical strength, flexibility and abrasion resistance to provide protection along the entire length of all the moving parts. In this hardworking environment of both dynamic and static applications, it is essential that cable management products continue to deliver performance in areas where resistance to oils and chemicals is paramount. Any down time in manufacturing can be very costly, so products that offer high ingress protection are fundamental. Adaptaflex offers a wide range of solutions to meet all of these needs. Technology is increasingly being used in modern machine tools, and the need to interface conduit to multipin connectors is escalating. Typical Applications Metal Cutting and Fabrication Milling Machines CNC Machine Tool Technology Molding Machinery Wood Turning Equipment Product Recommendations SPL Liquidtight Conduit Systems Overbraided Conduit Systems 4
5 Applications MARINE Marine Overview Safety and reliability are vital considerations in this harsh operational environment. Products specified and installed in exposed areas have to face damaging effects from wind, wave and salt spray conditions. This environment also demands the most robust products that can withstand vibration and temperature extremes. Typical Applications Ship/Boat Engine Rooms Ship and Dock Yards Leisure Boats and Cruisers Marina Developments Ocean-Going Craft Adaptaflex offers a broad range of solutions to suit this sector. They provide minimum environmental impact, corrosion and chemical resistance, long service life and low fire hazard properties.
6 Applications AUTOMATION Automation Overview In the field of automation, all cable management systems need to withstand some grueling conditions concerning flexibility. Motionintensive, continuous cycling machinery can stress conduit systems in every direction with high-speed repetitive movements, including swivel actions. The ability to work at high speed for long periods is a prerequisite, with total reliability in hostile or no-maintenance applications essential. Any conduit system installed in this environment requires one or all of the following properties: high fatigue life performance, protection from abrasion, high flexibility and first-class pullout strength. Adaptaflex provides a wealth of technical expertise to ensure you have the right product for the job. Typical Applications Pick and Place Robotics Conveyor Systems Spray Painting and Coating Equipment Clean Room Applications Measuring and Testing Automation Product Recommendations Braided Conduit Adaptasteel Conduit 6
7 Applications MULTIPLE APPLICATIONS Multiple Applications Overview The range of applications for Adaptaflex cable and energy management systems is almost limitless. Whenever cable needs protection and wherever cable connections are required, Adaptaflex provides superior systems for every cable management challenge. The range of products and variety of materials to choose from are immense. With different materials providing different performance characteristics, it is important that you select the right product for your particular application as well as the right material to give you superior performance. s of Individual Markets Served Telecommunications Medical Mining/Quarrying Automotive Rail Systems Subway and Light Rail Systems Security and CCTV MOD Adaptaflex Applications Engineers offer 0+ years of experience gained internationally across all different market sectors. Our custom design service and expert technical knowledge guarantee you will find the perfect Adaptaflex solution for your application. 7
8 Metallic Systems QUICK SELECTION GUIDE Quick Selection Guide - Metallic Systems TYPE S STEEL CONDUIT TYPE SS STAINLESS STEEL CONDUIT TYPE SP LIQUID-RESISTANT CONDUIT TYPE SN LIQUID-RESISTANT NYLON CONDUIT TYPE LFH-SP LOW FIRE HAZARD CONDUIT TYPE SPL LIQUIDTIGHT CONDUIT TYPE SPLHC EXTREME TEMPERATURE CONDUIT TYPE SB STEEL BRAIDED CONDUIT TYPE STC STEEL-TINNED COPPER BRAIDED CONDUIT TYPE SSB STAINLESS STEEL BRAIDED CONDUIT TYPE SSBGS STAINLESS STEEL BRAIDED CONDUIT TYPE SPB LIQUID-RESISTANT BRAIDED CONDUIT TYPE SPTC LIQUID-RESISTANT TINNED COPPER BRAIDED CONDUIT TYPE SPLHCB LIQUIDTIGHT EXTREME TEMPERATURE CONDUIT Conduit Material Covering/Overbraid IP RATING (with appropriate fitting) IP40 IP4 IP6 IP66 IP67 IP68 IP69k Galvanized Stainless Galvanized Galvanized Galvanized Galvanized Galvanized Galvanized Galvanized Stainless Galvanized Galvanized Galvanized Galvanized Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel Steel PVC PA (Nylon) Polyolefin PVC Thermoplastic Rubber Galvanized Steel Tinned Copper Stainless Steel Stainless Steel PVC & Stainless Steel PVC & Tinned Copper Rubber & Stainless Steel Static Temp - Min. Max. -8 F +7 F -8 F +660 F - F +60 F -40 F +20 F - F +9 F - F +220 F -8 F +27 F -8 F +7 F -8 F +7 F -8 F +7 F -8 F +7 F - F +60 F - F +60 F -8 F +27 F UV Resistance Flexibility Medium Medium Medium Medium Medium Fatigue Life Low Fire Hazard Halogen Free Self Extinguishing EMI Screen Mechanical Strength Abrasion Resistance Approvals Medium Medium Medium Medium Medium Medium Inherent Inherent Enhanced Inherent Inherent Inherent Inherent Enhanced Standard Standard Enhanced Standard Page Number
9 Metallic Systems Conduit, Fittings & Accessories Range Overview Adaptaflex offers individual metallic conduit systems manufactured either in galvanized steel or stainless steel. Three different conduit types provide liquid resistance, and three additional liquidtight covered steel conduit options are able to withstand especially demanding environments. Conduit ranges from mm for CCTV/roller shutter doors and for protecting fiber optic cables to 7mm for larger cable carrying capacity. Overbraided conduits are particularly suitable for installation in abrasive environments. Where applications call for enhanced low fire hazard properties or EMI screening, there is the option of high-specification tinned copper overbraided for greater EMI protection levels. In addition, a range of fittings is specifically designed to maintain system integrity. These include fixed and swivel fittings, straights, 90, 4, and a host of accessories including locknuts, enlargers, reducers and converters. Advantages compression/crush strength Tensile strength pull off load under tension Impact resistance Inherent fire protection on uncoated versions Corrosion-resistant, stainless steel options Braided level EMI screening with tinned copper overbraided Greater temperature tolerances System approvals available: Ranges include: 9
10 Adaptasteel Metallic Systems TYPE S & SS FLEXIBLE STEEL CONDUIT & TYPE S FITTINGS PRODUCT CHARACTERISTICS To order, quote part no. and reel length e.g. S0/2M Materials TYPE S INHERENT LOW FIRE HAZARD STEEL CONDUIT Galvanized steel - general purpose TYPE SS INHERENT LOW FIRE HAZARD STEEL CONDUIT Stainless steel - corrosion resistant TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a locknut. NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) TYPE S DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) TYPE S ONLY TYPE S DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) TYPE S ONLY S , 0 S , 2, 0 S , 2, 0 S , 2, 0 S , 2 S , 2 S , 2 S S SS SS SS SS SS SS SS SS SS M2 S0/M2/A M6 S2/M6/A M6 S6/M6/A M20 S6/M20/A M20 S20/M20/A M2 S2/M2/A M2 S2/M2/A M40 S40/M40/A M0 S0/M0/A M6 S6/M6/A M7 S7/M7/A Note: PG thread sizes available. IP Rating with appropriate fitting S Fittings S Fittings S & SS Conduit IP40 S Fittings - A, B, F & C S Fittings - A, B, F & C S & SS Conduit IP6 IP66 IP67 IP68 NEW IP69k Temperature Range Static Applications: -8 F to +7 F Static Applications: -8 F to +660 F Static Applications: -8 F to +7 F UV Resistance Flexibility & Fatigue Life Flexiblity - Fatigue Life Flexiblity - Fatigue Life Fire Performance & EMI Screen Approvals System Applications Lighting/Cable Track Light Industrial OEM Food Industry Railway Corrosive Environments 0
11 PRODUCT CHARACTERISTICS Materials TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries and knockouts. TYPE F STRAIGHT FITTING - FIXED INTERNAL THREAD For attachment to external threads and other fittings. TYPE C SMOOTH ENTRY BUSH For locking conduit into plain holes in enclosures. NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) HOLE SIZE (mm) M2 S0/M2/B M6 S2/M6/B M6 S6/M6/B M20 S6/M20/B M20 S20/M20/B M2 S2/M2/B M2 S2/M2/B M40 S40/M40/B M0 S0/M0/B M20 S20/M20/F M2 S2/M2/F M2 S2/M2/F 9 S0/9/C 2 S2/2/C 6 S6/6/C 6 S6/6/C 20 S20/20/C 2 S2/2/C 2 S2/2/C 40 S40/40/C S0//C 6 S6/6/C 7 S7/7/C Note: PG thread sizes available. IP Rating with appropriate fitting S & SS Conduit S & SS Conduit S & SS Conduit IP40 S & SS Conduit S & SS Conduit S & SS Conduit IP6 IP66 IP67 IP68 NEW IP69k Temperature Range Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Fitting Characteristics Approvals
12 Adaptasteel Liquid-Resistant Metallic Systems TYPE SP, SN & LFH-SP COVERED STEEL FLEXIBLE CONDUIT & TYPE SP FITTINGS PRODUCT CHARACTERISTICS To order, quote part no., color and reel length e.g. SP0/BL/2M Materials TYPE SP LIQUID-RESISTANT GENERAL-PURPOSE COVERED STEEL FLEXIBLE CONDUIT PVC covered galvanized steel Color Black (BL), Gray (GR) & Orange (OR). TYPE SN LIQUID-RESISTANT, ABRASION- & SOLVENT-RESISTANT COVERED STEEL FLEXIBLE CONDUIT PA (nylon) covered galvanized steel Color Black (BL) only. TYPE LFH-SP LIQUID-RESISTANT ENHANCED LOW FIRE HAZARD COVERED STEEL FLEXIBLE CONDUIT Polyolefin covered galvanized steel Color Black (BL) only. NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) TYPE S ONLY DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) TYPE S ONLY DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) TYPE S ONLY SP , 0 SP , 0 SP , 2, 0 SP , 2, 0 SP , 2, 0 SP , 2 SP , 2 SP , 2 SP SP SN , 0 SN , 2, 0 SN , 2, 0 SN , 2, 0 SN , 2 LFH-SP LFH-SP LFH-SP , 0 LFH-SP , 2, 0 LFH-SP , 2 LFH-SP LFH-SP LFH-SP LFH-SP LFH-SP , 20 IR Rating with appropriate fitting IP4 SP Fittings SP Fittings - A, B, C, E & F SP Fittings SP Fittings - A, B, C, E & F SP Fittings SP Fittings - A, B, C, E & F IP6 SP Fittings - M & C90 SP Fittings - M & C90 SP Fittings - M & C90 IP66 IP67 IP68 NEW IP69k Temperature Range Static Applications: - F to +60 F Moving Applications: +2 F to +9 F Static Applications: -40 F to +20 F Moving Applications: - F to +00 F Static Applications: - F to +9 F Moving Applications: +2 F to +220 F UV Resistance Flexibility & Fatigue Life Flexiblity - Medium Fatigue Life Medium Flexiblity - Medium Fatigue Life Medium Flexiblity - Medium Fatigue Life Fire Performance & EMI Screen Self Extinguishing Self Extinguishing Halogen Free Approvals System Applications Machine Tools Indoor/Outdoor General Purpose Industrial Food Industry Manufacturing Areas Rail Food Industry Public Buildings 2
13 PRODUCT CHARACTERISTICS Materials TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a locknut. TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries and knockouts. TYPE C90 NEW 90 COMBINED FITTING & ELBOW with male external thread. Nickel-plated steel NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) M2 M6 M6 M20 M20 M2 M2 M40 M0 M6 M7 SP0/M2/A SP2/M6/A SP6/M6/A SP6/M20/A SP20/M20/A SP2/M2/A SP2/M2/A SP40/M40/A SP0/M0/A SP6/M6/A SP7/M7/A M2 SP0/M2/B M6 SP2/M6/B M6 SP6/M6/B M20 SP6/M20/B M20 SP20/M20/B M2 SP2/M2/B M2 SP2/M2/B M40 SP40/M40/B M0 SP0/M0/B M6 SP6/M6/C90 M20 SP6/M20/C90 M20 SP20/M20/C90 M2 SP2/M2/C90 M2 SP2/M2/C90 Note: PG thread sizes available. Note: PG thread sizes available. IP Rating with appropriate fitting SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit IP4 SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit IP6 SP, SN & LFH-SP Conduit IP66 IP67 IP68 NEW IP69k Temperature Range Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Fitting Characteristics Approvals
14 PRODUCT CHARACTERISTICS Materials TYPE M STRAIGHT SWIVEL FITTING - EXTERNAL THREAD For insertion into threaded entries and knockouts. TYPE F TYPE C STRAIGHT FITTING - FIXED INTERNAL THREAD SMOOTH ENTRY BUSH For attachment to external threads & other fittings. For locking conduit into plain holes in enclosures. TYPE E CONDUIT TERMINATOR Cable protection at exit point. NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) NPT THREAD HOLE SIZE (in.) HOLE SIZE (mm) M6 SP2/M6/M 8 SP6/08/M M6 SP6/M6/M 8 SP6/08/M M20 SP6/M20/M 2 SP20/00/M M20 SP20/M20/M 4 SP2/07/M M2 SP2/M2/M SP2/00/M M2 SP2/M2/M M40 SP40/M40/M M0 SP0/M0/M Note: PG thread sizes available. M20 SP20/M20/F M2 SP2/M2/F M2 SP2/M2/F 0. SP0/9/C 0.48 SP2/2/C 0.6 SP6/6/C 0.6 SP6/6/C 0.78 SP20/20/C.00 SP2/2/C.26 SP2/2/C.60 SP40/40/C 2.00 SP0/0/C 2.40 SP6/6/C 2.9 SP7/7/C SP2/E SP6/E SP6/E SP20/E SP2/E SP2/E SP40/E SP0/E SP6/E IP Rating with appropriate fitting SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit IP4 SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit SP, SN & LFH-SP Conduit IP6 SP, SN & LFH-SP Conduit IP66 IP67 IP68 NEW IP69k Temperature Range Static Applications: -8 F to +7 F Moving Applications: -0 C to +480 F Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Moving Applications: -0 F to +480 F Fitting Characteristics Approvals 4
15 Adaptasteel Liquidtight Metallic Systems TYPE SPL & SPLHC COVERED STEEL FLEXIBLE CONDUIT & TYPE SPL FITTINGS Materials PRODUCT CHARACTERISTICS TYPE SPLHC LIQUIDTIGHT EXTREME TEMPERATURE COVERED STEEL FLEXIBLE CONDUIT Thermoplastic rubber-covered galvanized steel. Color Black (BL) only. To order, quote part no., color and reel length e.g. SPL0/GR/0M TYPE SPL LIQUIDTIGHT OIL-RESISTANT COVERED STEEL FLEXIBLE CONDUIT PVC-covered galvanized steel. Color Black (BL), Gray (GR) & Orange (OR). NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) SPLHC , 0 SPLHC , 0 SPLHC SPLHC SPLHC SPLHC SPLHC SPLHC SPLHC SPL , 2, 0 SPL , 2, 0 SPL , 2, 0 SPL , 2, 0 SPL , 2, 0 SPL , 2, 0 SPL , 2 SPL , 2 SPL , 2 IP Rating with appropriate fitting IP40 IP6 IP66 IP67 IP68 NEW IP69k SPL Fittings SPL Fittings - M & C90 SPL Fittings - A, B & M SPL Fittings - M SPL Fittings - M SPL fittings SPL Fittings - M & C90 SPL Fittings - A, B & M SPL Fittings - M SPL Fittings - M Temperature Range UV Resistance Flexibility & Fatigue Life Fire Performance & EMI Screen Static Applications: -8 F to +27 F Moving Applications: -0 F to +00 F Flexiblity - Fatigue Life Self Extinguishing Halogen Free Static Applications: - F to +220 F Moving Applications: +2 F to +220 F Medium Flexiblity - Medium Fatigue Life Self Extinguishing Approvals System Applications Extreme Temperature Environments Chemical Plant Steel Mills Machine Tools
16 Adaptasteel Liquidtight Metallic Systems TYPE SPL & SPLHC COVERED STEEL FLEXIBLE CONDUIT & TYPE SPL FITTINGS PRODUCT CHARACTERISTICS Materials TYPE M STRAIGHT SWIVEL FITTING - EXTERNAL THREAD For insertion into threaded entries and knockouts. TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a locknut. TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries and knockouts. NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) NPT THREAD M2 SPL0/M2/M M6 SPL2/M6/M 8 SPL6/08/M M6 SPL6/M6/M 8 SPL6/08/M M20 SPL6/M20/M 2 SPL20/00/M M20 SPL20/M20/M 4 SPL2/07/M M2 SPL2/M2/M SPL2/00/M M2 SPL2/M2/M 4 SPL40/2/M M40 SPL40/M40/M 2 SPL0/0/M M0 SPL0/M0/M 2 SPL6/200/M M6 SPL6/M6/M M6 SPL6/M6/A M20 SPL6/M20/A M20 SPL20/M20/A M2 SPL2/M2/A M2 SPL2/M2/A M6 SPL6/M6/B M20 SPL6/M20/B M20 SPL20/M20/B M2 SPL2/M2/B M2 SPL2/M2/B Note: PG thread sizes available. IP Rating with appropriate fitting SPL & SPLHC Conduit SPL & SPLHC Conduit SPL & SPLHC Conduit IP4 IP6 IP66 SPL & SPLHC Conduit IP67 SPL & SPLHC Conduit SPL & SPLHC Conduit SPL & SPLHC Conduit IP68 SPL & SPLHC Conduit 0bar 0 mins NEW IP69k SPL & SPLHC Conduit Temperature Range Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Fitting Characteristics Approvals 6
17 PRODUCT CHARACTERISTICS Materials TYPE E CONDUIT TERMINATOR Cable protection at exit point. TYPE C90 90 COMBINED FITTING & ELBOW with male external thread. Hot-dipped galvanized steel NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) SPL0/E SPL2/E SPL6/E SPL6/E SPL20/E SPL2/E SPL2/E SPL40/E SPL0/E SPL6/E M6 SPL6/M6/C90 M20 SPL6/M20/C90 M20 SPL20/M20/C90 M2 SPL2/M2/C90 M2 SPL2/M2/C90 IP Rating with appropriate fitting IP4 IP6 IP66 IP67 IP68 NEW IP69k SPL & SPLHC Conduit SPL & SPLHC Conduit SPL & SPLHC Conduit Temperature Range Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Fitting Characteristics None None Approvals 7
18 Adaptasteel Overbraided Metallic System TYPE SB, STC, SSB & SSBGS SPECIALIST EMI SCREEN CONDUIT & TYPE SB FITTINGS PRODUCT CHARACTERISTICS To order, quote part no. and reel length e.g. SB0/2M TYPE SB OVERBRAIDED FLEXIBLE CONDUIT TYPE STC OVERBRAIDED FLEXIBLE CONDUIT TYPE SSB OVERBRAIDED FLEXIBLE CONDUIT TYPE SSBGS OVERBRAIDED FLEXIBLE CONDUIT Materials Galvanized steel conduit Galvanized steel overbraid Galvanized steel conduit Tinned copper overbraid Stainless steel conduit Stainless steel overbraid Galvanized steel conduit Stainless steel overbraid NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) SB SB SB SB SB SB SB SB SB SB STC STC STC STC STC STC STC STC SSB SSB SSB SSB SSB SSBGS SSBGS SSBGS SSBGS SSBGS IP Rating with appropriate fitting SB Fittings SB Fittings SB Fittings SB Fittings IP40 SB Fittings - A & B SB Fittings - A & B SB Fittings - A & B SB Fittings - A & B IP6 IP66 IP67 IP68 IP69k NEW Temperature Range Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F Moving Applications: -8 F to +660 F Static Applications: -8 F to +7 F UV Resistance Flexibility & Fatigue Life Flexiblity - Fatigue Life Flexiblity - Fatigue Life Flexiblity - Fatigue Life Flexiblity - Fatigue Life Fire Performance, EMI Screen & Fitting Characteristics Approvals System Applications Industrial OEM Rail OEM Corrosive Environments OEM Chemicals Heavy Industrial 8
19 PRODUCT CHARACTERISTICS Materials TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a locknut. TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries and knockouts. NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) IP Rating with appropriate fitting IP40 IP6 IP66 IP67 IP68 NEW IP69k M2 SB0/M2/A M6 SB2/M6/A M6 SB6/M6/A M20 SB20/M20/A M2 SB2/M2/A M2 SB2/M2/A M40 SB40/M40/A M0 SB0/M0/A M6 SB6/M6/A M7 SB7/M7/A Note: PG thread sizes available. SB, STC, SSB & SSBGS Conduit SB, STC, SSB & SSBGS Conduit M2 SB0/M2/B M6 SB2/M6/B M6 SB6/M6/B M20 SB20/M20/B M2 SB2/M2/B M2 SB2/M2/B M40 SB40/M40/B M0 SB0/M0/B Note: PG thread sizes available. SB, STC, SSB & SSBGS Conduit SB, STC, SSB & SSBGS Conduit Temperature Range Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F UV Resistance Flexibility & Fatigue Life Fitting Characteristics Approvals 9
20 Adaptasteel Overbraided Metallic System TYPE SPB & SPTC SPECIALIST LIQUID-RESISTANT, EMI SCREEN CONDUIT & TYPE SPB FITTINGS PRODUCT CHARACTERISTICS To order, quote part no. and reel length e.g. SPB0/2M TYPE SPB OVERBRAIDED FLEXIBLE CONDUIT TYPE SPTC OVERBRAIDED FLEXIBLE CONDUIT TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a locknut. TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries and knockouts. Materials Galvanized steel conduit with PVC covering Galvanized steel overbraid Galvanized steel conduit with PVC covering Tinned copper overbraid NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) NOMINAL CONDUIT SIZE (mm) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) SPB SPB SPB SPB SPB SPB SPB SPB SPTC SPTC SPTC SPTC SPTC SPTC SPTC SPTC M2 M6 M6 M20 M2 M2 M40 M0 SPB0/M2/A SPB2/M6/A SPB6/M6/A SPB20/M20/A SPB2/M2/A SPB2/M2/A SPB40/M40/A SPB0/M0/A Note: PG thread sizes available. M2 M6 M6 M20 M2 M2 M40 M0 SPB0/M2/B SPB2/M6/B SPB6/M6/B SPB20/M20/B SPB2/M2/B SPB2/M2/B SPB40/M40/B SPB0/M0/B Note: PG thread sizes available. IP Rating with appropriate fitting SPB Fittings SPB Fittings SPB & SPTC Conduit SPB & SPTC Conduit IP4 SPB Fitting - A & B SPB Fitting - A & B SPB & SPTC Conduit SPB & SPTC Conduit IP6 IP66 IP67 IP68 NEW IP69k Temperature Range Static Applications: -8 F to +60 F Moving Applications: +2 F to +9 F Static Applications: -8 F to +60 F Moving Applications: +2 F to +9 F Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F UV Resistance Flexibility & Fatigue Life Flexiblity - Medium Fatigue Life Flexiblity - Medium Fatigue Life Fire Performance, EMI Screen & Fitting Characteristics Approvals System Applications Security Lighting Hospitals External Safety Critical Areas 20
21 Adaptasteel Overbraided Metallic System TYPE SPLHCB SPECIALIST LIQUIDTIGHT HIGH-STRENGTH CONDUIT & TYPE SPLB FITTINGS PRODUCT CHARACTERISTICS To order, quote part no. and reel length e.g. SPB0/2M TYPE SPLHCB EXTREME TEMPERATURE, ABUSE-RESISTANT, OVERBRAIDED FLEXIBLE CONDUIT TYPE A STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a locknut. TYPE B STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries and knockouts. Materials Galvanized steel conduit, smooth thermoplatic rubber covering, stainless steel overbraid NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) TYPE SB DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB M6 M20 M20 M2 M2 M40 M0 M6 SPLB6/M6/A SPLB6/M20/A SPLB20/M20/A SPLB2/M2/A SPLB2/M2/A SPLB40/M40/A SPLB0/M0/A SPLB6/M6/A M6 SPLB6/M6/B M20 SPLB6/M20/B M20 SPLB20/M20/B M2 SPLB2/M2/B M2 SPLB2/M2/B Note: PG thread sizes available. Note: PG thread sizes available. IP Rating with appropriate fitting SPLB Fittings SPLHCB Conduit SPLHCB Conduit IP40 IP6 IP66 SPLB Fittings - A & B SPLHCB Conduit SPLHCB Conduit IP67 SPLB Fittings - A & B SPLHCB Conduit SPLHCB Conduit IP68 SPLB Fittings - A & B SPLHCB Conduit - 0bar 0 mins SPLHCB Conduit - 0bar 0 mins NEW IP69k Temperature Range Static Applications: -8 F to +27 F Moving Applications: -0 F to +00 F Static Applications: -8 F to +7 F Static Applications: -8 F to +7 F UV Resistance Flexibility & Fatigue Life Flexiblity - Fatigue Life Fire Performance, EMI Screen & Fitting Characteristics Approvals System Applications Railways Underground Steel Mills 2
22 Metallic Accessories LOCKNUTS, P-CLIPS, 90 & 4 ELBOWS, PROXIMITY SWITCH ADAPTERS & FEMALE COUPLERS PRODUCT CHARACTERISTICS TYPE LNB/LNS METALLIC LOCKNUTS TYPE P P-CLIP CONDUIT SUPPORT TYPE 90/4 BRASS ELBOWS Materials Galvanized steel Plated steel construction with PVC insert NPT THREAD STEEL NICKEL-PLATED BRASS GALVANIZED STEEL NOMINAL CONDUIT SIZE (mm) METRIC INTERNAL THREAD EXTERNAL THREAD 90 ELBOW 4 ELBOW 6" M2 x.0 6" M2 x. 8" LNS/08 M6 2" LNS/00 M20 4" LNS/07 M2 " LNS/00 M2 4" LNS/2 M40 2" LNS/0 M0 2" LNS/200 M6 2 2" M7 LNB/M2 x LNB/M2 LNB/M6 LNS/M6 LNB/M20 LNS/M20 LNB/M2 LNS/M2 LNB/M2 LNS/M2 LNB/M40 LNB/M0 LNB/M6 LNB/M7 4 P CLIP/0 6 P CLIP/2 8 P CLIP/6 8 P CLIP/6 2 P CLIP/20 4 P CLIP/2 P CLIP/2 4 P CLIP/40 2 P CLIP/0 2 P CLIP/6 2 2 P CLIP/7 M20 2" NPT B/00/90 B/00/4 M2 4 " NPT B/07/90 B/07/4 M2 " NPT B/00/90 B/00/4 M6 M6 B/PG9/90 M20 M6 B/M6/4 M20 M20 B/M20/90 B/M20/4 M2 M2 B/M2/90 B/M2/4 M2 M2 B/M2/90 B/M2/4 Materials TYPE TC UNEF THREAD CONVERTERS WITH TWO INTERNAL THREADS FEMALE COUPLER BRASS FEMALE COUPLER INTERNAL THREAD TO M6 INTERNAL THREAD TO M20 INTERNAL THREAD TO M2 INTERNAL THREAD TO M2 INTERNAL THREAD TO PG2 INTERNAL THREAD 8" UNEF B/06U-M6/TC 4" UNEF B/07U-M6/TC B/07U-M20/TC 7 8" UNEF B/088U-M20/TC " UNEF B/00U-M20/TC B/00U-M2/TC 6" UNEF B/9U-M20/TC B/9U-M2/TC 6" UNEF B/U-M20/TC 7 6" UNEF B/44U-M2/TC B/44U-M2/TC B/44U-PG2/TC THREAD M6 M20 M2 M2 M40 M0 M6 M7 PART NUMBER B/M6/C B/M20/C B/M2/C B/M2/C B/M40/C B/M0/C B/M6/C B/M7/C 22
23 Metallic Accessories ENLARGERS, REDUCERS & CONVERTERS PRODUCT CHARACTERISTICS TYPE E, TYPE R & TYPE TC ENLARGERS, REDUCERS & CONVERTERS Materials EXTERNAL THREAD TO M0 TO M2 TO M6 INTERNAL THREAD TO M20 TO M2 TO M2 TO M40 8" NPT B/08-M6/TC 2" NPT B/00-M6/TC B/00-M20/TC 4 " NPT B/07-M2/TC " NPT B/00-M2/TC M6 B/M6-M0/R B/M6-M2/R B/M6-M20/E M20 B/M6-M0/R B/M20-M2/R B/M20-M6/R B/M20-M2/E M2 B/M2-M20/R B/M2-M2/E M2 B/M2-M2/R M40 B/M40-M2/R M0 _ B/M0-M40/R EXTERNAL THREAD TO PG7 INTERNAL THREAD TO PG9 INTERNAL THREAD TO PG INTERNAL THREAD TO PG. INTERNAL THREAD TO PG6 INTERNAL THREAD TO PG2 INTERNAL THREAD TO PG29 INTERNAL THREAD TO PG6 INTERNAL THREAD TO PG42 INTERNAL THREAD TO PG48 INTERNAL THREAD M6 B/M6-PG7/TC B/M6-PG9/TC B/M6-PG/TC M20 B/M20-PG7/TC B/M20-PG9/TC B/M20-PG/TC B/M20-PG/TC B/M20-PG6/TC B/M20-PG2/TC M2 B/M2-PG2/TC M2 B/M2-PG29/TC M40 M0 2
24 Cutting Tools CUT-VICE, ROTOCUT & SWINGCUT PRODUCT CHARACTERISTICS CUT-VICE Cut-vice offers the ability to produce a clean cut for conduit sizes 6mm to 40mm. ROTOCUT Rotocut offers a simple but effective method for cutting 20mm and 2mm S, SS, SP, LFH-SP and SN steel conduit types. INSTRUCTIONS Place the conduit along the vice body and tighten the clamp. Holding the conduit and integral handle together, insert a hacksaw blade into the guide and cut. For braided conduit, wrap adhesive tape around the cutting point to secure braid. Remove tape after cutting. Adjust the clamping pin so that the conduit is just held in the recess. Squeeze the lever and body while rotating the cutting blade. When the blade appears on the inside of the conduit, release the pressure and remove the conduit. A simple twist will then separate the two parts. Where the conduit is covered, the covering can be cut prior to separation. Spare blades are available. SWINGCUT Swingcut is a versatile vice and saw combination tool which facilitates a neat, square cut for liquidtight and pliable conduits between 0mm and 2mm. Six to one leverage advantage provides a strong cutting action. Warning: When operating these or other cutting tools, always keep hands clear of the cutting blades to avoid injury. INSTRUCTIONS Place the conduit in the vice and secure. Move the operating handle backwards and forwards while applying increasing pressure to the supporting handle. Hardened, captive spring-loaded retaining pins make blade replacement easy. Spare blades are available. 24
25 Non-Metallic Systems QUICK SELECTION GUIDE Quick Selection Guide Non-Metallic Systems TYPE PK UNBRAIDED CONDUIT TYPE PKTC LIGHTWEIGHT CONDUIT TYPE PKSS LIGHTWEIGHT CONDUIT TYPE PRTC STANDARD WEIGHT CONDUIT TYPE PRSS STANDARD WEIGHT CONDUIT Conduit Material PK PK PK PA6 PA6 Covering/Overbraid IP RATING (with appropriate fitting) IP40 IP4 IP6 IP66 IP67 IP68 IP69k Tinned Copper Stainless Steel Tinned Copper Stainless Steel Static Temp - Min. Max. -76 F +00 F -76 F +00 F -76 F +00 F -40 F +20 F -40 F +20 F UV Resistance Flexibility Fatigue Life Medium Medium Low Fire Hazard Super Super Super Enhanced Enhanced Halogen Free Self Extinguishing EMI Screen Standard Standard Mechanical Strength Abrasion Resistance Approvals Page Number
26 HI-SPEC Non-Metallic Flexible Systems TYPE PK, PKTC, PKSS, PRTC & PRSS SPECIALIST LOW FIRE HAZARD, EMI SCREEN CONDUIT & FITTINGS PRODUCT CHARACTERISTICS To order, quote part no., color and reel length e.g. PKFS/BL/80FT TYPE PK - PEEK SUPER-LOW FIRE HAZARD CONDUIT TYPE A - PEEK STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into knockouts using a locknut. TYPE PKTC SUPER-LOW FIRE HAZARD OVERBRAIDED TYPE PKSS SUPER-LOW FIRE HAZARD OVERBRAIDED Materials Polyketone Color Black (BL) only. Polyketone conduit/tinned copper overbraid Polyketone conduit/stainless steel overbraid NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE DIAMETER (in.) RADIUS (in.) REEL LENGTH (m) TYPE PKTC DIAMETER (in.) RADIUS (in.) REEL LENGTH (ft.) TYPE PKSS DIAMETER (mm) RADIUS (mm) REEL LENGTH (ft.) 6 0. F F F C.6 4 C PKFS , 60 PKFS , 60 PKFS , 60 PKCS , 60 PKCS , 60 M6 M6 M20 M2 M2 PK/M6/A PK6/M6/A PK2/M20/A PK28/M2/A PK4/M2/A PKFSTC , 60 PKFSTC , 60 PKFSTC , 60 PKCSTC , 60 PKCSTC , 60 PKFSSS , 60 PKFSSS , 60 PKFSSS , 60 PKCSSS , 60 PKCSSS , 60 IP Rating with appropriate fitting PK PEEK PK HI-SPEC A & B HI-SPEC A & B IP40 IP6 IP66 PK Fitting PK Conduit HI-SPEC A & B Fittings HI-SPEC A & B Fittings IP67 PK Fitting PK Conduit HI-SPEC A & B Fittings HI-SPEC A & B Fittings IP68 NEW IP69k Temperature Range Static Applications: -76 F to +00 F Moving Applications: -0 F to +00 F Static Applications: -76 F to +00 F Moving Applications: -0 F to +00 F Static Applications: -76 F to +00 F Moving Applications: -0 F to +00 F Static Applications: -76 F to +00 F Moving Applications: -0 F to +00 F UV Resistance Flexibility & Fatigue Life Flexiblity - Fatigue Life Flexiblity - Fatigue Life Flexiblity - Fatigue Life Fire Performance & EMI Screen Approvals System Applications Railways Underground Public Buildings Safety Critical Environment Nuclear Plant Harsh Environments Petrochemical Offshore 26
27 PRODUCT CHARACTERISTICS TYPE PRTC ENHANCED LOW FIRE HAZARD OVERBRAIDED TYPE PRSS ENHANCED LOW FIRE HAZARD OVERBRAIDED TYPE A - HI-SPEC STRAIGHT FITTING - FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. TYPE B - HI-SPEC STRAIGHT FITTING - SWIVEL EXTERNAL THREAD For insertion into threaded entries & knockouts. Materials PA (nylon) 6 conduit/tinned copper overbraid PA (nylon) 6 conduit/tinned stainless steel overbraid NOMINAL CONDUIT SIZE (in.) OUTSIDE DIAMETER (in.) METRIC CONDUIT SIZE (mm) CONDUIT PITCH F = FINE C= COARSE TYPE PRTC DIAMETER (in.) RADIUS (in.) REEL LENGTH (ft.) TYPE PRSS DIAMETER (in.) RADIUS (in.) REEL LENGTH (ft.) F F C.6 4 C C C PRFSTC PRFSTC PRCSTC PRCSTC PRCSTC PRCSTC PRFSSS PRFSSS PRCSSS PRCSSS PRCSSS PRCSSS M6 PBF6/M6/A M20 PBF2/M20/A M2 PBC28/M2/A M2 PBC4/M2/A M6 M20 M2 M2 M40 M0 PBF6/M6/B PBF2/M20/B PBC28/M2/B PBC4/M2/B PBC42/M40/B PBC4/M0/B IP Rating with appropriate fitting HI-SPEC A & B HI-SPEC A & B PKTC, PKSS, PRTC & PRSS PKTC, PKSS, PRTC & PRSS IP40 IP6 IP66 HI-SPEC A & B Fittings HI-SPEC A & B Fittings PKTC, PKSS, PRTC & PRSS Conduit PKTC, PKSS, PRTC & PRSS Conduit IP67 HI-SPEC A & B Fittings HI-SPEC A & B Fittings PKTC, PKSS, PRTC & PRSS Conduit PKTC, PKSS, PRTC & PRSS Conduit IP68 NEW IP69k Temperature Range Static Applications: -40 F to +20 F Moving Applications: +2 F to +20 F Static Applications: -40 F to +20 F Moving Applications: +2 F to +20 F Static Applications: -7 F to +00 F Moving Applications: -0 F to +00 F Static Applications: -7 F to +00 F Moving Applications: -0 F to +00 F UV Resistance Flexibility & Fatigue Life Medium Flexiblity - Fatigue Life Medium Flexiblity - Fatigue Life Fire Performance & EMI Screen Approvals System Applications Rail Systems Safety Critical Environments Rail Systems Harsh Environments 27
28 Technical Section THREAD DATA Thread Data NPT US taper seal pipe thread conforming to ANSI/ASME B UNEF American Unified Thread conforming to ANSI/ASME B. 200 METRIC Standard thread conforming to EN6042 & BS64 PG German Standard thread conforming to DIN4040 PF Japanese conduit thread conforming to JIS B 0202 THREAD SIZE (in.) EXT THREAD OUTSIDE DIAMETER PITCH THREAD SIZE (in.) EXT THREAD OUTSIDE DIAMETER INT THREAD DIAMETER PITCH THREAD SIZE (in.) EXT THREAD OUTSIDE DIAMETER INT THREAD DIAMETER PITCH THREAD SIZE mm EXT THREAD OUTSIDE DIAMETER PITCH THREAD SIZE (in.) EXT THREAD OUTSIDE DIAMETER INT THREAD DIAMETER PITCH NOTE: Dimensions are nominal and in mm unless otherwise stated M M M M M M M M M M M M M M
29 Technical Section EMI SCREEN SYSTEM & FIRE PERFORMANCE EMI Screen System STANDARD EMI SCREEN ENHANCED EMI SCREEN HIGH EMI SCREEN For applications where electromagnetic interference is of particular concern, we have classified suitable conduit systems by means of symbols. These are related in an ascending scale of performance from Standard EMI Screen (products featuring a stainless steel overbraid) through to EMI Screen (products featuring a tinned copper overbraid). Fire Performance LOW FIRE HAZARD ENHANCED LOW FIRE HAZARD SUPER-LOW FIRE HAZARD INHERENT LOW FIRE HAZARD PROPERTY LFH ELFH SLFH ILFH OXYGEN INDEX ISO489 % OI 28% OI % OI % Inherent Low BS68 SMOKE DENSITY m 0.02 A A A Fire Hazard ZERO HALOGEN i.e. ZERO PHOSPHORUS S, SS, SPB ZERO SULPHUR STC, SSB & SSBGS LONDON UNDERGROUND CONCESSION APPROVED APPROVED Metallic Conduit TOXICITY INDEX NES7 ISSUE.0 TI TI.0 TI 0. & Fittings NFF6-02 IF2 I2F2 I2F Adaptaflex has introduced a set of symbols to help the user specify conduit systems for installations where fire performance is of particular concern. Each symbol encompasses a range of properties relevant to the high specification materials used in the construction of the conduit. They are in an ascending scale of performance from Low Fire Hazard (LFH) featuring zero halogen through to Super-Low Fire Hazard (SLFH) featuring zero nitrogen. In addition, Inherent Low Fire Hazard systems (ILFH) are classified as being all metal systems. 29
30 Technical Section IP RATINGS & FITTING CHARACTERISTICS Ingress Protection (IP) Rating according to EN 6029/DIN 4000 IP suitability ratings are a system for classifying the degree of protection provided by enclosures of electrical equipment. The higher the number, the greater the degree of protection; they apply ONLY to properly installed equipment. The numerals stand for the following: 0 The first digit stands for: Protection against Dust Protection against Solid Bodies Degree of protection for persons against access to hazardous parts inside the enclosure and/or against the ingress of solid foreign objects. 0 IP68 No protection Objects greater than 0mm, accidental touch by hands Objects greater than 2mm, accidental touch by fingers Objects greater than 2.mm, e.g. tools/wires Objects greater than mm, e.g. tools/wires/small wires Protected against dust; limited ingress (no harmful deposits) Totally protected against dust (dust-tight) NEMA 20 TO IEC 6029 NEMA NEMA S NEMA 4 & 4X NEMA 6 & 6P NEMA This is offered as a guide only. IP4 IP4 IP6 IP 6 7 IP4 IP68 The second digit stands for: Protection against Water Protection against Water Degree of protection of equipment inside enclosures against damage from the ingress of water. 0 No protection Protected against vertically falling drops of water k Protected against direct sprays of water up to from vertical Protected against sprays of water to 60 from vertical Protected against water sprayed from all directions; limited ingress permitted Protected against low-pressure jets of water from all directions; limited ingress permitted Protected against strong-pressure jets of water, heavy seas; limited ingress permitted Protection against the effects of immersion between cm m Protection against long periods of immersion under a quoted pressure (e.g. 2bar at 24 hours) IP69k automotive standard DIN4000 and signifies resistance to high-pressure jets of water (up to 80bar) from any angle Fitting Characteristics Fitting or thread swivels independently of conduit during installation but is not suitable as a rotating joint in constantly moving applications. Fitting rotates independently of the conduit to act as a rotating joint within constantly moving applications.
31 Technical Section CHEMICAL RESISTANCE Chemical resistance comparison table Products S (including braid) SS (including braid) LFH-SP SPL SPLHC TC braid Nickel-Plated Brass Fittings Chemical ASTM No. ASTM No. 2 ASTM No. Acetic Acid (0%) Acetone Aluminium Chloride NT Aniline Benzaldehyde Benzene Carbon tetrachloride Chlorine Water Chloroform Citric Acid Copper Sulphate Cresol Diesel Oil Diethylamine Ethanol Ether Ethylamine Ethylene Glycol Ethyl Ethanoate Freon 2 Hydrchloric Acid (0%) Hydrchloric Acid (6%) Hydrogen Peroxide (%) Hydrogen Peroxide (87%) Lactic Acid Lubricating Oil Methanol Methyl Bromide MEK Nitric Acid (0%) Nitric Acid (70%) Oxalic Acid Ozone (gas) Paraffin Oil Petrol Phenol Sea Water Silver Nitrate Skydrol Sodium Chloride Sodium Hydroxide (0%) Sodium Hydroxide (60%) Sulphur Dioxide (gas) Sulphuric Acid (0%) Sulphuric Acid (70%) Toluene Transformer Oil,,-Trichloroethane Trichloroethylene Turpentine Vegetable Oil Vinyl Acetate Water White Spirit Zinc chloride Key SUITABLE Note The information above is given as a guide only and is based on published technical data and experience. LIMITED SUITABILITY The chemical resistance of the above products is dependant on factors such as chemical exposure, concentration of the UNSUITABLE chemical and temperature. The above chemical table is valid for a temperature of 2 C. NOT TESTED NT Use of the above table is at the user s own discretion and risk. Those using it must satisfy themselves that their application presents no health and safety risks. The end user should assess compatibility with their application and contact Adaptaflex for further information.
32 Reference INDEX Part No.... Page Part No.... Page Part No.... Page 2 B/08-M6/TC... 2 B/00/ B/00/ B/00-M6/TC... 2 B/00-M20/TC... 2 B/06U-M6/TC B/07/ B/07/ B/07-M2/TC... 2 B/07U-M6/TC B/07U-M20/TC B/088U-M20/TC B/00/ B/00/ B/00-M2/TC... 2 B/00U-M20/TC B/9U-M20/TC B/9U-M2/TC B/U-M20/TC B/44U-M2/TC B/44U-M2/TC B/44U-PG2/TC B/M6/ B/M6/ B/M6/C B/M6-M0/R... 2 B/M6-M2/R... 2 B/M6-M20/E... 2 B/M20/ B/M20/ B/M20/C B/M20-00/TC... 2 B/M20-M2/R... 2 B/M20-M6/R... 2 B/M20-M2/E... 2 B/M2/ B/M2/ B/M2/C B/M2-M20/R... 2 B/M2-M2/E... 2 B/M2/ B/M2/ B/M2/C B/M2-M2/R... 2 B/M40/C B/M40-M2/R... 2 B/M0/C B/M0-M40/R... 2 B/M6/C B/M7/C B00U-M2/TC CUT-VICE LFH-SP LFH-SP LFH-SP LFH-SP LFH-SP LFH-SP LFH-SP LFH-SP LFH-SP LFH-SP LNB/M2x LNB/M LNB/M LNB/M LNB/M LNB/M LNB/M LNB/M LNB/M LNB/M LNS/ LNS/ LNS/ LNS/ LNS/ LNS/ LNS/ LNS/M LNS/M LNS/M LNS/M PBC28/M2/A PBC28/M2/B PBC4/M2/A PBC4/M2/B PBC42/M40/B PBC4/M0/B PBF6/M6/A PBF6/M6/B PBF2/M20/A PBF2/M20/B PK/M6/A PK6/M6/A PK2/M20/A PK28/M2/A PK4/M2/A PKCS PKCS PKCSSS PKCSSS PKCSTC PKCSTC PKFS... 22
33 Reference INDEX Part No.... Page Part No.... Page Part No.... Page PKFS PKFS PKFSSS PKFSSS PKFSSS PKFSTC PKFSTC PKFSTC PRCSSS PRCSSS PRCSSS PRCSSS PRCSTC PRCSTC PRCSTC PRCSTC PRFSSS PRFSSS PRFSTC PRFSTC ROTOCUT ROTOCUT-BLADE S S0/9/C... S0/M2/A... 0 S0/M2/B... S2/2/C... S S2/M6/A... 0 S2/M6/B... S6/6/C... S S6/M6/A... 0 S6/M6/B... S6/M20/A... 0 S6/M20/B... S S20/20/C... S20/M20/A... 0 S20/M20/B... S20/M20/F... S S2/2/C... S2/M2/A... 0 S2/M2/B... S2/M2/F... S S2/2/C... S2/M2/A... 0 S2/M2/B... S2/M2/F... S S40/40/C... S40/M40/A... 0 S40/M40/B... S S0//C... S0/M0/A... 0 S0/M0/B... S S6/6/C... S6/M6/A... 0 S S7/7/C... S7/M7/A... 0 SB SB0/M2/A... 9 SB0/M2/B... 9 SB SB2/M6/A SB2/M6/B... 9 SB SB6/M6/A... 9 SB6/M6/B... 9 SB SB20/M20/A... 9 SB20/M20/B... 9 SB SB2/M2/A... 9 SB2/M2/B... 9 SB SB2/M2/A... 9 SB2/M2/B... 9 SB SB40/M40/A... 9 SB40/M40/B... 9 SB SB0/M0/A... 9 SB0/M0/B... 9 SB SB6/M6/A... 9 SB SB7/M7/A... 9 SN SN SN SN SN SN SN SP0/9/C... 4 SP SP0/M2/A... SP0/M2/B... SP2/2/C... 4
34 Reference INDEX Part No.... Page SP SP2/E... 4 SP2/M6/A... SP2/M6/B... SP2/M6/M... 4 SP6/08/M... 4 SP6/6/C... 4 SP SP6/E... 4 SP6/M6/A... SP6/M6/B... SP6/M6/C90... SP6/M6/M... 4 SP6/M20/A... SP6/M20/B... SP6/M20/C90... SP6/M20/M... 4 SP20/00/M... 4 SP20/20/C... 4 SP SP20/E... 4 SP20/M20/A... SP20/M20/B... SP20/M20/C90... SP20/M20/F... 4 SP20/M20/M... 4 SP2/07/M... 4 SP2/2/C... 4 SP SP2/E... 4 SP2/M2/A... SP2/M2/B... SP2/M2/C90... SP2/M2/F... 4 SP2/M2/M... 4 Part No.... Page SP2/00/M... 4 SP2/2/C... 4 SP SP2/E... 4 SP2/M2/A... SP2/M2/B... SP2/M2/C90... SP2/M2/F... 4 SP2/M2/M... 4 SP40/40/C... 4 SP SP40/E... 4 SP40/M40/A... SP40/M40/B... SP40/M40/M... 4 SP0/0/C... 4 SP SP0/E... 4 SP0/M0/A... SP0/M0/B... SP20/M0/M... 4 SP6/6/C... 4 SP SP6/M6/A... SP7/7/C... 4 SP SP7/M7/A... SPB SPB0/M2/A SPB0/M2/B SPB SPB2/M6/A SPB2/M6/B SPB SPB6/M6/A Part No.... Page SPB6/M6/B SPB SPB20/M20/A SPB20/M20/B SPB SPB2/M2/A SPB2/M2/B SPB SPB2/M2/A SPB2/M2/B SPB SPB40/M40/A SPB40/M40/B SPB SPB0/M0/A SPB0/M0/B SPL0... SPL0/E... 7 SPL0/M2/M... 6 SPL2... SPL2/E... 7 SPL2/M6/M... 6 SPL6/08/M... 6 SPL6/M6/A... 6 SPL6/M6/B... 6 SPL6... SPL6/E... 7 SPL6/M6/C SPL6/M6/M... 6 SPL6/M20/A... 6 SPL6/M20/B... 6 SPL6/M20/C SPL6/M20/M... 6 SPL20/00/M... 6 SPL
35 Reference INDEX Part No.... Page SPL20/E... 7 SPL20/M20/A... 6 SPL20/M20/B... 6 SPL20/M20/C SPL20/M20/M... 6 SPL2/07/M... 6 SPL2... SPL2/E... 7 SPL2/M2/A... 6 SPL2/M2/B... 6 SPL2/M2/C SPL2/M2/M... 6 SPL2/00/M... 6 SPL2... SPL2/E... 7 SPL2/M2/A... 6 SPL2/M2/B... 6 SPL2/M2/C SPL2/M2/M... 6 SPL40/2/M... 6 SPL40... SPL40/E... 6 SPL40/M40/M... 6 SPL0/0/M... 6 SPL0... SPL0/E... 7 SPL0/M0/M... 6 SPL6... SPL6/E... 7 SPL6/M6/M... 6 SPLB6/M6/A... 2 SPLB6/M6/B... 2 SPLB6/M20/A... 2 SPLB6/M20/B... 2 SPLB20/M20/A Part No.... Page SPLB20/M20/B... 2 SPLB2/M2/A... 2 SPLB2/M2/B... 2 SPLB2/M2/A... 2 SPLB2/M2/B... 2 SPLB40/M40/A... 2 SPLB0/M0/A... 2 SPLB6/M6/A... 2 SPLHC0... SPLHC2... SPLHC6... SPLHC20... SPLHC2... SPLHC2... SPLHC40... SPLHC0... SPLHC6... SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB SPLHCB SPTC SPTC SPTC SPTC SPTC SPTC SPTC SPTC SS SS SS Part No.... Page SS SS SS SS SS SS SSB SSB SSB SSB SSB SSBGS SSBGS SSBGS SSBGS SSBGS STC STC STC STC STC STC STC STC SWINGCUT... 24
36 Thomas & Betts Corporation 8 T&B Boulevard Memphis, TN 82 Phone Thomas & Betts Corporation 700 Avenue Thomas St.-Jean-sur-Richelieu, Quebec J2X 2M9 Phone FAX Thomas & Betts Corporation. All rights reserved. GM-XXXX
Adaptaflex Metallic & Specialty Flexible Conduit Systems
In this section... Adaptaflex Metallic & Specialty Flexible Conduit Systems Adaptaflex Metallic & Specialty Flexible Conduit Systems Overview...E-268 E-27 Metallic Flexible Conduits and Fittings...E-272
More informationAdaptaflex & Kopex-Ex Flexible Conduit Systems. A Global Leader in Innovative...
A Global Leader in Innovative... Wire & Cable Management Cable Protection Systems Power Connection & Control Safety Technology Adaptaflex & Kopex-Ex Flexible Conduit Systems Machine Tools Adaptaflex &
More informationMetallic Systems TYPE SPTC
CONDUIT 27/01/2009 Technical Data Sheet Page No. 1 Applications Hospitals External Safety Critical Area Fittings IP54 SPB Fittings type A & B Characteristics Very High UV Resistance High Flexibility Medium
More informationAdaptaseal non-metallic system LIQUID TIGHT COMPRESSION FITTINGS & ACCESSORIES
Adaptaseal non-metallic system LIQUID TIGHT COMPRESSION FITTINGS & ACCESSORIES To order quote part no & colour - e.g. ASF10//A/BL TYPE A - ADAPTASEAL Locknut supplied with ONLY Colour Black (BL) & Grey
More informationHelaGuard. Non-Metallic Conduit & Fittings
HelaGuard Non-Metallic Conduit & Fittings HelaGuard Non-Metallic Conduit Systems Page HelaGuard Overview 3 Conduit Application Overview 4 Mounting & Removing HelaGuard Non-Metallic Fittings 5 HelaGuard
More informationCable Management Solutions. HelaGuard. Non-Metallic Conduits and Fittings
Cable Management Solutions HelaGuard Non-Metallic Conduits and Fittings Table of Contents Page HelaGuard Overview 4 Conduit Application Overview 6 Mounting & Removing HelaGuard Non-Metallic Fittings 7
More informationCATALOG. Adaptaflex Flexible conduit systems for critical power and data cable protection
CATALOG Adaptaflex Flexible conduit systems for critical power and data cable protection Adaptaflex is one of the market leading flexible conduit system brands that can be found all over the world. Combining
More informationEngineered installation products Solutions for control panel applications
Engineered installation products Solutions for control panel applications 2 Engineered installation products Solutions for control panel applications Solutions for control panel applications ABB introduces
More informationDesign Solutions for Vehicle Wiring Applications
Design Solutions for Vehicle Wiring pplications about us - OEM design culture Harnessflex is a leading designer and manufacturer of flexible conduit systems and connector interfaces, protecting critical
More informationFast and Flexible Protection for Electrical Cables! Shureflex Nylon Liquidtight Conduit System
Fast and Flexible Protection for Electrical Cables! Shureflex Nylon Liquidtight System Shureflex Nylon Liquidtight System Quick and Secure One- Piece Fitting Installation with No Tools Required! The best
More informationP17 Tempra Pro plugs, mobile sockets, fixed sockets, surface mounting sockets and appliance inlets - IP 66/67-63 A A
CONTENTS Page 5 555 09 5 555 29 5 555 59 5 555 9 1. General characteristics...1 2. Use...1 3. Range/Equivalence table...2 4. Dimensions..............................3 5. Technical characteristics...5 6.
More informationSHIELD-FLEX EMI / RFI Shielded Conduit
Type SLA SHIELD-FLEX EMI / RFI Shielded Conduit Type EMS EMCS Type z Wire without interference. Shielded conduit provides exceptional shielding effectiveness from electromagnetic and radio frequency interference
More informationNYLON FLEXIBLE CONDUIT AND ACCESSORIES
NYLON FLEXIBLE CONDUIT AND ACCESSORIES ANAMET ANACONDA SEALTITE NORTH AMERICA QUICK SELECTION GUIDE 1. WHAT MATERIAL OF CONDUIT IS NEEDED? PA6 PA12 AC6L LIGHT WALL AC6S STANDARD WALL AC6R MEDIUM WALL AC12S
More informationANACONDA MULTITITE CONDUIT TYPE FCE-LFHB
ANACONDA MULTITITE CONDUIT TYPE FCE-LFHB Flexible, extra robust, halogen free and low smoke Type FCE-LFHB is a high quality galvanised steel core conduit with a halogeen free TPO cover and a stainless
More informationCable Protection Solutions for Shielding Applications CATALOG LOCK 2013 VERSION 1.0
Cable Protection Solutions for Shielding pplications LOCK CTLOG 2013 VERSION 1.0 Cable Protection Solutions for Shielding pplications Electromagnetic interference (EI) is noise that may interrupt, obstruct,
More informationHYPRA Prisinter 16/32/63 A
8704 LIMOGES Cedex Telephone: + 33 0 06 87 87 - Fax: + 33 0 06 88 88 HYPR Prisinter 16/32/63 Page 1. General characteristics........1 2. Range......................1 3. Dimensions............... 2-3 4.
More informationPRODUCT CATALOG. Cable glands for Global Applications
PRODUCT CATALOG Cable glands for Global Applications 2 CABLE GLANDS FOR HAZARDOUS & INDUSTRIAL APPLICATIONS ABB provides renowned cable protection solutions, including conduit systems and cable glands
More informationTECHNICAL DATASHEET. Weatherproof LED luminaire DUNA FLEX Standard Plus. 50,000 h product life IK C. Applications recommendation
TECHNICAL DATASHEET IK 08 Frequency 0 50/60Hz Rated voltage 220 240V 850 C 50,000 h product life +35 C -25 C DSTP 1.2 40-840 ET PC DPC PA General characteristics Applications recommendation LED module
More informationSHIELD-FLEX EMI / RFI Shielded Conduit
Type SLA SHIELD-FLEX EMI / RFI Shielded Conduit Type EMS Type EMCS z Wire without interference. Shielded conduit provides exceptional shielding effectiveness from electromagnetic and radio frequency interference
More informationSEMI, manufacturer of superior quality electrical flexible conduit and fittings systems. Over Braided Liquid Tight Conduit ( YF-705 )
Over Braided Liquid Tight Conduit ( YF-705 ) Trade Size I.D. (mm) O.D. (mm) Min Bending MIN. MAX. MIN. MAX. Meters/Coil YF-70503 3/8" 12.3 12.8 18.5 19.0 75 50 YF-70504 1/2" 15.7 16.3 21.8 22.3 95 50 YF-70506
More informationFLEXIBLE CONDUIT & ACCESSORIES. the power in cable management PRODUCT GUIDE 03
Fleicon front 17/7/03 2:39 pm Page 1 FLEXIBLE CONDUIT & ACCESSORIES the power in cable management PRODUCT GUIDE 03 Product guide p2-3 8/7/03 9:05 am Page 2 What s new from Fleicon? Bigger! Better! Purpose
More information150 Series Brass Horizontal Float Valve. Technical Information
150 Series Brass Horizontal Float Valve Technical Information HORIZONTAL FLOAT VALVES Based on a simple yet effective operating principle, Philmac horizontal float valves are quick and easy to install
More informationVentureClad Insulation Jacketing Tapes 1577 Series
VentureClad Insulation Jacketing Tapes 1577 Series Technical Data August 2017 Product Description 3M VentureClad Insulation Jacketing System is a zero permeability, all weather, multi-layered laminate
More informationPlastic bearings that revolve around your needs.
NON-CORROSIVE n NON-MAGNETIC n LIGHTWEIGHT Plastic bearings that revolve around your needs. FROM MAGNUS MOBILITY SYSTEMS ISO 9001-2008 Certified Plastic bearings that revolve around your needs We go to
More informationStrength, resilience, rigidity - these are all attributes needed to combat arduous and aggressive conditions. Tufflite has them all.
Strength, resilience, rigidity - these are all attributes needed to combat arduous and aggressive conditions. Tufflite has them all. From commercial applications requiring a simple sealed luminaire, right
More informationTECHNICAL DATASHEET. Weatherproof LED luminaire ZALEDA EVOL II. 85,000 h product life. General characteristics. Mounting accessories.
85,000 h product life Frequency 0 50/60Hz PMMA 650 ºC IK03 Rated voltage 220 240V PC 850 ºC IK08 +45 C -30 C ZALEDA EVOL G2 6000-840 ET PC General characteristics New weatherproof LED lighting generation
More informationTECHNICAL DATASHEET. Weatherproof LED luminaire DUNA FLEX High Efficiency. 70,000 h product life IK C. Applications recommendation
70,000 h product life Frequency 0 50/60Hz 650 C IK 03 Rated voltage 220 240V +35 C -25 C DHE 1.2 41-840 ET SMC DPM IX CG General characteristics Applications recommendation LED module luminaire manufactured
More informationP17 combined units LIMOGES Cedex Telephone : Fax : Cat. No.(s) : 566 XX XX XX XX
8704 LIMOGES Cedex Telephone : + 33 0 06 87 87 - Fax : + 33 0 06 88 88 P17 combined units Cat. No.(s) : 66 XX - 72 XX - 77 XX - 89 XX CONTENTS Page 1. Description...1 2. Use...1 3. Range.......................
More informationSTRAIGHT FITTING FIXED EXTERNAL THREAD For insertion into threaded entries & knockouts. Black only. METRIC THREAD PART NUMBER* AL16/M16/PPA
adaptalok system STRAIGHT ONE-PIECE PUSH-ON LIQUID TIGHT IP66 FITTINGS TYPE A IP66 STRAIGHT FITTING FIXED EXTERNAL THREAD Black (BL) and Grey (GR). TYPE PPA IP66 STRAIGHT FITTING FIXED EXTERNAL THREAD
More informationADVANCE System ADVANCE SYSTEM IP66 MODULAR SYSTEM FOR COMBINATION UNITS VERSIONS MODULE 136 MODULE 106. t. 56. Without protective devices
ADVANCE System ADVANCE SYSTEM IP66 MODULAR SYSTEM FOR COMBINATION UNITS Without protective devices Interlocked-switch socket outlets QUADRA Series socket outlets For 16 and 32 A currents Protection degree
More informationCONDUFIX Cable protection system. Protective conduits Connection fittings Connection manifold 90 -flange System holder Cable assemblies
1 CONUFIX Cable protection system Protective conduits Connection fittings Connection manifold 90 -flange System holder Cable assemblies Reaching new heights in automation Contents: - CONUFIX - Advantages
More informationGeneral characteristics
Multipole Industrial Connectors General characteristics The multipole connectors for industrial purposes are used in electric and electronic machinery, robots, electric panels, control equipments and wherever
More informationReplacement Tubes for Gillian Gas Detection Pumps
236SA S 1,1,2-Trichloroethane (10-100 ppm) 235SA S 1,1-Dichloroethane (10-160 ppm) 230SA S 1,2-Dichloroethane (5-50 ppm) 145SA S 1,2-Dichloroethylene (4.2-840 ppm) 194S S 1,3-Dichloropropane (10-500 ppm)
More informationSelection of DODGE E-Z KLEEN Polymer and Stainless Steel Housed Ball Bearings. P = (X x F R ) + (Y x F A ) F A C o
Selection of DODGE and Stainless Steel Housed Ball Bearings DODGE ball bearings are primarily designed for radial loading. However, they have the capacity to carry thrust loads and combined radial/thrust
More informationMarina Cabinets LIMOGES Cedex Telephone: Fax:
87045 LIMOGES Cedex Telephone: 0 5 55 06 87 87 - Fax: 0 5 55 06 88 88 Marina s CONTENTS Page 1. Main characteristics...1 2. Range....1 3. Technical characteristics...1 4. Dimensions....3 5. Equipments...4
More informationSmall on price, big on boot
018 VOLUME 1 FEATURES KEY Toe Cap High Heat Non Conductive Female Male Leather Chemical Body International Organization for Standardisation Body PU - Polyurethane RECOMMENDED INDUSTRY USE* General Smelting/
More informationTubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings Produced in food grade chrome plated brass, these 1/8 flow size couplings are more durable and withstand higher pressures. They are available
More informationQ-Duct wiring duct. Q-Duct Wiring duct. Catalog number explanation QD 100 X 100 S G
Q-Duct Wiring duct Wire duct, ties, Q-Duct wiring duct General information ABB offers Q-Duct, a wide variety of wire duct and accessories. Wire duct bases are available in six nominal widths - 1/2" to
More informationP17 plugs, mobile sockets and surface-mounting sockets «New range 16 and 32 A»
87045 LIMOGES Cedex Telephone : + 33 0 5 55 06 87 87 - Fax : + 33 0 5 55 06 88 88 P7 plugs, mobile and surface- Cat. Nos. : 555 53/57/58/73/77/78-5 53/57/58/73/77/78 CONTENTS Page 575 4. Definition....
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More informationFR-3S Fire Resistant Cables
FR-3S Fire Resistant Cables APPLICATION This cable is suitable use in fire extinguishing systems to operate sprinklers, control panels, exit lights in high-rise buildings, hotels, hospitals, sub-ways and
More informationBetaflex flexible conduit solutions
Protect Betaflex flexible conduit solutions The highly regarded Betaflex range includes polypropylene, halogen-free, rail approved and galvanised steel conduit. A matched range of accessories and tooling
More information2. RANGE. RAL 7035 Cabinets Vertical version (external dimensions in mm) Square version (external dimensions in mm) Supplied with plain plate (2) (1)
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Atlantic Cat. No(s): 0 355 00/0/0/03/04/05/06/07/08/09/0//4 0 355 5/7/8/0///3/4/6/7/8/9/30/3/3/33/34/36 0 355 37/90/9/9/93/94/95/96/97/98-0
More informationSteel Conduits Conduit Fittings Flexible Conduits
Conduits Conduit Fittings Flexible Conduits CONTENT 1. INTRODUCTION VOLTECX products introduction and selecting VOLTECX 2. STEEL CONDUITS VOLTECX BS4568: Part 1: 1970 (Class 4) Conduit IEC 61386-21:2004;
More informationCable Glands & Accessories
Cable Glands & Accessories This catalog features ITC s extensive range of liquid-tight, strain relief cord connectors (cable glands) and accessories, including locknuts, sealing washers, plugs, etc. These
More information60PP Series Couplings
Tubing Size 3/8 3/4 3/8 Flow Polypropylene 60PP Series Couplings These New 60PP Series couplings bring the highest available 3/8 flow with both valved and nonvalved configurations. They are manufactured
More informationMetal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Industrial Application
Metal LIQUID TIGHT CONDUIT FITTINGS & ACCESSORIES for Straight, Male 45, Male 90, Male Straight, Female Straight, Cable Hose, Male Straight Swivel Fittings Ferrules for Fittings Further Accessories Applications
More informationDimensions / Order Codes
U-Bolt Clamps Dimensions / Flat Steel U-Bolt with Plastic Pipe Saddle (Short) and U-Profile Type FB+RUK (To be used as Fixed Point Clamps only) B1 ø D1 H4 H2 H3 H1 L2 L1 B2 Flat Steel U-Bolt (type FB)
More informationTECHNICAL MANUAL COMPRESSION FITTINGS
TECHNICAL MANUAL COMPRESSION FITTINGS Elysee Join the Professionals! The professional s choice for complete solutions in piping systems. Best value for money. Top quality at competitive prices One- stop
More informationPower & Control Cables. U o. /U 0.6/1 kv - IEC
Power & Control Cables U o /U 0.6/1 kv - IEC 60502-1 2 KERPEN GmbH & Co. KG 07.2005 Printing errors excepted. Subject to alteration List of Contents Introduction Page B1 Construction Page B3 Use Page B4
More informationIssue One. Chemical Compatibility Guide
Issue One Chemical Compatibility Guide Chemical Compatibility Guide Fluolion 200, 700, 800, 900 modified PTFE sheet gasket materials The following information is issued as a guide only. All media are taken
More informationPower & Control Cables
The Quality Connection Power & Control Cables U o /U 0.6/1 kv - IEC 60502-1 2 The Quality Connection www.leoni-industrial-projects.com The LEONI Group Cable expertise for the most various industrial markets.
More informationCABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables. Catalogue
CABLES FOR AUTOMOTIVE MARKET Sensor and multimedia cables Catalogue Introduction Nexans has developed a range of special and customised cables for the automotive market. This cable range covers two main
More informationItem Description Page. Halogen-free wiring cable with improved fire performance and extended temperature range 300/500 V, CE...
Halogen-free ables E-mail: info@sab.com Web site: www.sab.com Item Description Page hapter A A 146 FRN A A 156 FRN Halogen-free wiring with improved fire performance and extended temperature range 300/500
More informationINDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES
INDUSTRIAL VACUUM SYSTEMS HOSE, TOOLS & ACCESSORIES HOFFMAN & LAMSON ENGINEERED VACUUM SYSTEMS Industrial Vacuum HOSES, TOOLS & ACCESSORIES Commercial Duty Hoses Crushproof Plastic 4 Flexible Plastic 4
More informationTrough Valve. Technical Information
Trough Valve Technical Information TOUGH VALVES Philmac s unique and compact trough valve is essentially a float valve but has been designed specifically for stock troughs. The valve hugs the trough wall
More informationHalogen Free, Flame-retardant Polyether based TPU
STANDARD COLORS CMX Cable Markers Halogen Free, Flame-retardant Polyether based TPU TECHNICAL DATA SHEET Revision Number. 1 Last Edited 11. marts 2019 OTHER COLORS MATERIAL halogen free, flame retarded
More informationANACONDA SEALTITE CONDUIT TYPE NMUA GREY
ANACONDA SEALTITE CONDUIT TYPE NMUA GREY All-plastic, medium mechanical strength, flexible, UL & CSA approved (type B) The NMUA is the universal applicable all plastic conduit. The lead-free PVC cover
More informationSECTION. Watertight & Dust-Tight Plugs & Connectors
SECTION Watertight & ust-tight Wetguard Product Line Section Contents LIFETIME Wetguard Plugs, Connectors & Straight Blade 2-Pole 3-Wire 2-Pole 3-Wire 3-Pole 4-Wire 3-Pole 3-Wire Non- 4-Pole 4-Wire Non-
More informationSection 3 - Chemical/Environmental Resistance Part 1 - XR-5 Fluid Resistance Guidelines
Section 3 - Chemical/Environmental Resistance Part 1 - XR-5 Fluid Resistance Guidelines The data below is the result of laboratory tests and is intended to serve only as a guide. No performance warranty
More informationTechnical data sheet LÜTZE SUPERFLEX PLUS M (C) PUR SERVO 0.6/1 kv Supply line for Bosch Rexroth and other systems For highest requirements
PVC servo cables C-track compatible shielded Subject to technical modification 111270 Identification Type SU+M(C)P SE(4G1,0+2 (2 0,75))UL 1KV OR INK Description* INK 0653 Use/Application/Properties Application
More informationColorimetric Gas Detector Tube System US Dollar Price List
Colorimetric Gas Detector Tube System US Dollar Price List Sensidyne, LP - Gas Detector Tube Price List Effective Date: February 12, 2012 Rev. A 010612 Table of Contents Gas Detection Pump Kit & Accessories
More informationGas-insulated medium-voltage switchgear. For marine and offshore applications. Answers for energy.
Gas-insulated medium-voltage switchgear For marine and offshore applications Answers for energy. Full power on the high seas This much is certain: whatever happens on the surface and on the floors of the
More informationWe offer two fire retardant (FR) resins for strut systems: polyester and vinyl ester. Both resins are ideal for corrosive environments.
Materials We offer two fire retardant (FR) resins for strut systems: polyester and vinyl ester. Both resins are ideal for corrosive environments. While polyester is sufficient for most uses, vinyl ester
More informationThermocouples. General Applications Tube and Wire. Thermal Devices, Inc. Mount Airy, Maryland USA
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
More informationHose and Fitting Edition
and Fitting Edition www.dnpamericas.com Phone: 281-388-0253 Fax: 281-388-1902 1 Table of Contents Determining Size 3 Selection Table 4 1SC, 100R2AT 5 100R16, 100R17 6 Jackhose, 2SN 7 4SP, 4SH 8 100R13,
More informationThermocouples. General Applications Tube and Wire. Performance Capabilities. Features and Benefits. Typical Applications. Construction and Tolerances
Watlow is a world class supplier of temperature measurement products, with more than 90 years of manufacturing, research and design expertise. Companies engaged in critical process control of food and
More information4.2. Fittings Metal and plastic fittings with positive sealing against liquids and dust. Thomas & Betts
Fittings Metal and plastic fittings with positive sealing against liquids and dust 214 ONDUIT & FITTINGS 4.1 FLEXILE ONDUITS 194 4.2 FITTINGS & ESSORIES 214 Selection guide 218 T& liquidtight fittings
More informationFlame-retardant PVC offers the protection you need.
Solid wall wiring duct Flame-retardant PVC offers the protection you need. Solid wall duct PVC Engineered to restrict wire access Constructed of flame-retardant PVC Improved flush sidewall and cover style
More informationFLAT FACE COUPLINGS FIRG SERIES FLAT FACE, QUICK RELEASE HYDRAULIC COUPLINGS PREMIER RANGE INTRODUCTION ADVANTAGES APPLICATIONS OPERATION
FLAT FACE COUPLINGS FIRG SERIES PREMIER RANGE INTRODUCTION Holmbury FIRG Series couplings were first introduced in 1982. Their early success was due to good performance, long life and competitive prices.
More informationGrommet TET. Cable glands. Basic Data. Application. Press the grommet into the hole.
Basic Data Description s available in two different materials, EPDM and CR. Suitable for Untapped holes of material from 0.5 to 4 thickness. For completely dust and watertight cable and pipe inlets. Advantages
More informationPRESSURE MONITORING.
MONITORING PRESSURE MONITORING PRESSURE Pressure-control systems overview Technical explanations From page 8 Selection matrix Support for selection of suitable pressure switch Page 10 Pressure switches
More informationwww. h itech controls.com (800) I (303) Click or Call for a Quotel Photo: HELUKABEL Robotic Cables C HELUKABEL
Photo: HELUKABEL Robotic Cables Robotic Cables With over 30 years of experience with cables and lines, we also have the right solutions for the demands placed on the components to be installed by the applications
More informationData sheet. Connection cable M12 jack straight - free line end 8-pole, X-coded 0.5 m. Illustrations P/N 142M2X20005 EAN
Page 1/6 Illustrations Dimensional drawing Cut-out See enlarged drawings at the end of document Product specification shielded M12 Ethernet connection cable Cat.6A, x-coded, 8-pole side 1: M12-jack, straight
More informationTHE ORIGINAL MODULAR HOSE SYSTEM
2017 THE ORIGINAL MODULAR HOSE SYSTEM LOC-LINE The original modular hose system. Loc-Line was the answer to an age old problem specific to the machine tool industry: How to easily apply liquid coolant
More informationModels 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/
Models 910, 911, 916, 917, 920, 921, 927 ASME Section VIII, Air/Gas/ Steam/Liquid, UV National Board Certified. Also available for Vacuum Service Model 921: Steel body and bonnet with plain lift lever
More informationABOUT US ABOUT US OUR VISION OUR MISSION CORE VALUES
ABOUT US Our company is led by a professional team, and is equipped with 15 Mobile Service Vans to attend break downs and turnkey jobs on site around the clock all over in UAE. If the volume of work is
More informationSECTION FIVE INDUSTRIAL LUBRICATIONFITTINGS
INDUSTRIAL LUBRICATIONFITTINGS Threaded/Drive Carbon Steel/Monel/Stainless Steel Standard/Metric Specialty Vents/Breathers Couplers Accessories 82 Alemite Product Catalog As the inventor of the Zerk fitting,
More informationProduct Information S/PA
Description Tico S is a high performance machinery mounting material. It matches today s fast changing manufacturing environment, where ease of machine mounting and flexibility of plant layout are prime
More informationCABLE GRIPS Strain-Relief Grips Pulling Grips Support Grips
Tough and dependable, Woodhead cable grips and cord grip bodies are reliable workhorses in any plant environment. They serve as flexible holding devices used to pull cable, rope, or tubing into place,
More informationANAMET Electrical, Inc. Worldwide Leader in Flexible Conduit Technology
ANAMET Electrical, Inc. Worldwide Leader in Flexible Conduit Technology ANACONDA SEALTITE 2018 ANAMET Electrical, Inc. AN ANAMET COMPANY When you say SEALTITE, there is only one: ANACONDA. Type MTC Type
More informationO-RINGS METRIC SIZES AVAILABLE
METRIC SIZES AVAILABLE 16 97 ILLUSTRATIONS BELOW NOT TO SCALE Military Specification References Temperature Range F Drawing # Specification Static Dynamic Fluid Low High Elastomer Comments AN1295 For use
More informationTCI5125 Dusttight Grip " 1.50"NPT Ins
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TCI5125 Dusttight Grip 1.20-1.50" 1.50"NPT Ins Eaton Wiring Devices Catalog Number Manufacturer Description Weight per
More informationClamping Handles & Adjustable Tension Levers. Leaflet No. A03.1
I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Leaflet No. A03.1 Clamping Handles & Adjustable Tension Levers I N D U S T R I A L M A N U F A C T U R I N G S I N C E 1 9 2 3 Who we are
More informationis the UK subsidary of Tele-Fonika Kable S.A., with offices and a warehouse centrally located in Leicestershire.
is the UK subsidary of Tele-Fonika Kable S.A., with offices and a warehouse centrally located in Leicestershire. We are a major supplier of housewiring, low voltage, power and fire resistant cables for
More informationSwivel Joints Flexmaster Joints Part Number NH NH NH NH NH NK NK
FLUID CONVEYING PRODUCTS Section Pages Hose 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Description Page Features 246, 247 Technical Data 248, 253 Gasket Selector Chart 249 How to Order 250
More informationKML KML. Socketless cast iron system for aggressive waste water from kitchens and laboratories. Product information
KM KM system for aggressive waste water from kitchens and laboratories Product information KM system for aggressive waste water from kitchens and laboratories KM Product range, technical data KM product
More informationCable Protection Systems. Identification Products. Wire & Cable. Cable Assemblies & Subsystems
Cable Protection Systems Identification Products Wire & Cable Cable Assemblies & Subsystems 2 MV Electrosystems Pvt. Ltd. www.mvelectrosystems.com 3 ABOUT US Q RDSO Our Quality policy ISO 9001 : 2008 ISO
More informationTubing. Bend With Us
TABLE OF CONTENTS Tubing ITEM PAGE # ITEM PAGE # Tubing PVC General Technical Tubing Informatino Clear PVC Tubing...413 Tube Selection and Sizing...410 Clear-Braided Reinforced Tubing...414 Steel Steel
More informationPRODUCT INFORMATION ÖLFLEX HEAT 125 C MC. Info Improved characteristics in the event of a fire GL - Germanischer Lloyd approved
Electron beam cross-linked cables for more demanding application requirements - halogen free shielded control cable with GL certificate, special fire performance, IEC 60332-3, suitable for +125 C Info
More informationChemical Resistance of Arnitel
Chemical Resistance of Arnitel Chemical resistance of any material is a function of the interactions that occur between the polymer and a chemical in contact. The chemical resistance or the lack of it
More informationProduct Overview. Harnessflex TempGuard system High temperature wiring harnesses
Product Overview Harnessflex TempGuard system High temperature wiring harnesses Harnessflex TempGuard system High temperature wiring harnesses The NW TempGuard range from Harnessflex has been designed
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationInstallation Guide PHILMAC 3G TM COMPRESSION FITTINGS. Turn On To Faster Installation TM
Installation Guide P O T A B L E W A T E R S Y S T E M S PHILMAC 3G TM COMPRESSION FITTINGS Turn On To Faster Installation TM Philmac 3G TM Installation Guide 1 TABLE OF CONTENTS PHILMAC 3G TM NEXT GENERATION
More informationPower & Control Cable IEC
(2-, 3-, and 4-cores) U 0 PVC-Insulation, Application For electricity supply and control in public networks and industrial plants; suitable for use in zone 1 and zone 2 group ΙΙ classified areas (IEC 60079-14).
More informationTubing & Hose Metric. Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel
Tubing & Hose Metric Nylon, Polyurethane, Polyester Reinforced PVC, Metal Braided Rubber, Copper, Double Wall Brazed Steel Available in a variety of different types to suit a wide range of applications
More informationSeismic Sensor Accessories SA, SV & ST 6000 Series
Seismic Sensor Accessories SA, SV & ST 6000 Series Part Number Name Used With Description Housing Material 7295-002 Accelerometer EP Housing SA6200A-X0X; SV6300A-001 Physical protection and access to 1/4-28
More informationEZ-View. Flow Meters ISO CERTIFIED 9001
EZ-View ISO CERTIFIED 9001 General Design Features OPERATING PRINCIPLE The EZ-View Flow Meter is a variable-area instrument. A precisionmolded, sharp-edged Orifice, located within the Piston Assembly,
More informationCATALOG. Ty-Duct Wiring duct
CATALOG Ty-Duct Wiring duct Thomas & Betts is now ABB Installation Products, but our long legacy of quality products and innovation remains the same. From connectors that help wire buildings on Earth to
More informationPRODUCT BROCHURE. Ty-Rap high-performance cable ties The Original Oval
PRODUCT BROCHURE Ty-Rap high-performance cable ties The Original Oval 1 TY-RAP HIGH-PERFORMANCE CABLE TIES The Original Oval The Original Oval design of Ty-Rap high-performance cable ties represents 60
More information