2. RANGE. RAL 7035 Cabinets Vertical version (external dimensions in mm) Square version (external dimensions in mm) Supplied with plain plate (2) (1)

Transcription

1 87045 LIMOGES Cedex Telephone: (+33) Fax: (+33) Atlantic Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 Page. General characteristics.... Range Technical data Dimensions Equipment Accessories GENERAL CHARACTERISTICS. RANGE RAL 7035 Vertical version (external dimensions in mm) Steel cabinets coated with 80 µm textured polyester. RAL 7035 IP 55 ( doors), IP 66 ( door) to standard IEC EN 66 (EN ). IK 0 Approvals: UL, Nema 4x ( door), Nema ( doors), CSA, Bureau Veritas, TÜV and GÖST Heights : ////700//000/00. Widths : 00//////000/00. Depths : 60/00///. Dimensions: vertical, square, horizontal. Reversible doors with a single closure mechanism. Hinges and pins with high performance anti-corrosion treatment. Fitted with latch up to mm height and handle above mm. Locking with key 433 A ( keys supplied). Direct fixing of equipment in base of cabinet (self centering of equipment). Optional adjustment of equipment from size mm high x mm wide. Lower cable entry plate with symmetrical fixing, except /09. Reinforced protection with top plate. fix with feet, on a plinth or on a mounting frame. Polyurethane door seal. Transparent door with viewing window in tinted tempered glass. EMC attenuation 0 db. Height Width Depth () 60 ()() Number of doors Weight (kg) Square version (external dimensions in mm) Height Width Depth Number of doors Weight (kg) () () Supplied with plain plate () No opening Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 /5

2 Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97. RANGE (continued) RAL 7035 cabinets (continued) Horizontal version (external dimensions in mm) Height Width Depth Number of doors With transparent door (external dimensions in mm) Tinted tempered glass External dimensions Weight (kg) 3. TECHNICAL DATA 3. Structure Steel. Body: thickness.3 mm. Base (H x W): thickness 0.8 for x cabinets and.3 for x cabinets. The overall dimensions of cabinets correspond to the stated dimensions for each cabinet catalogue number E.g.: x 00 x 60 are the actual dimensions of the cabinet. 3. Door Steel. Thickness:. to.8 mm depending on size. 3.3 Protection ratings IP 55 ( doors) in accordance with IEC EN Protected against water jets from any direction. IP 66 ( door) in accordance with IEC EN. Completely protected against dust and completely protected against strong jets of water, e.g. for use on ship decks. IK 0 in accordance with IEC EN 66 (EN ). Nema 4x ( door), Nema ( doors). 3.4 Mechanical strength - Max load: kg/m3 - Max load on door: 5 kg per 00 mm of height. - Max static load on set of 4 fixing feet: /04: kg. - Fixing on a frame, /37 in accordance with EN (Railway applications, fixed installations). 3.5 Resistance to climatic conditions - Excellent resistance to UV rays - ISO hour method. - Salt spray to ISO 97, EN 68--:,000 hours - Sulphur dioxide SO with condensation ISO 6988: hours - Degree of rusting after RI test ISO 468/. - Operating temperature: - 5 C to + 70 C (+ 00 C peak). 3.6 Fire resistance - Resistance to glow wire in accordance with IEC EN : 960 C. Window dimensions Height Width Depth Height Width Weight (kg) TECHNICAL DATA (continued) 3.7 Properties of the polyester coating Polyester-coated steel Application of a coating of pure polyester to a thickness of 80 μm, using electrostatic powder coating. Coating resistance according to tests Mechanical characteristics: - Adhesion to EN ISO 409: class 0 to. - Cylindrical mandrel bending to EN ISO 59: 6 mm with no flaw. - Cupping to EN ISO 50: 8 mm - Impact resistance to EN ISO 67-: kg - 50 cm Coating process Main stages of the process: - Phosphation: the layer of iron phosphate improves the adhesion of the coating. - Neutralisation - Passivation - Neutralisation. Touch-up work on the polyester Painting aerosol: RAL RAL 703 Touch-up brushes: Allows protection of the sheet steel after cutting RAL 7035 Other colours on request. 3.8 Resistance to chemical agents Resistance at ambient temperature in relation to the risk of exposure to spray. Aqueous solutions Alcohol Cold water ++ Hot water + Steam - 5% salt water + Oxygenated water - Water + detergent + Water + surfactants + Formaldehyde - Ethanol + Methanol + Propanol + Butanol + Phenols - Cresols - Bases Ammonia + Sodium hydroxide (caustic soda) + Sodium hypochlorite ( bleach) + Potassium hydroxide (potash) + Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 /5

3 3. TECHNICAL DATA (continued) 3.8 Resistance to chemical agents (continued) Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 3. TECHNICAL DATA (continued) 3.8 Resistance to chemical agents (continued) Strong oxidising acids Weak acids Concentrated acetic acid + 5% nitric acid + 30% sulphuric acid + 30% hydrochloric acid + 70% perchloric acid ++ 70% hydrofluoric acid -- 50% chromic acid - 30% phosphoric acid + Diluted acetic acid < 5% + Citric acid ++ Lactic acid ++ Formic acid + Uric acid + Fluorinated solvent Ketones Trichlorofluoromethane -- Acetone - Terpenes - Ethyl acetate - Terpenes Turpentine - ++: Excellent resistance (continuous exposure) +: Good resistance (sustained exposure) -: Limited resistance (possible casual exposure) --: Low resistance (exposure to be avoided) Of animal origin Lard ++ Butter, cream ++ Oils and greases Of vegetable origin Of mineral origin Linseed oil ++ Peanut / Olive ++ Castor oil ++ Glycerine + Paraffin (vaseline) ++ Car engine oils + Silicone oils ++ Cutting oils ++ Hydraulic oils + Unleaded petrol + Hydrocarbons Diesel oil ++ Kerosene ++ White spirit ++ Trichloroethylene -- Trichloroethane - Chlorinated solvents Tetrachloroethylene -- Methylene chloride -- Carbon tetrachloride -- Chloroform - Aromatic solvents Aliphatic solvents Benzene + Toluene - Xylene + Hexane ++ Heptane ++ Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 3/5

4 Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 4. DIMENSIONS Doors 4. DIMENSIONS (continued) Transparent door P L O P L Q O Tinted tempered glass External dimensions Viewing window dimensions Height Width Depth Height Width Cat. Nos Height () Central bolt () Upper or lower bolt (3) Without cable carrier Width Usable door dimensions Height O Width P Position of bolts Q Centreto-centre spacing between cable carriers L () (3) / () (3) () (3) / () (3) () (3) () /07 45 () () / () /0/ / () x () x () / () /3/ /67 75 () / () / x () / / () /7/ () x () x () / () x () / x () () x () 430 Usable cabinet depth on enclosure base Depth W X Adjustment of equipment (optional) Prof. Slide With slides W X min max min max W X W X Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 4/5

5 4. DIMENSIONS (continued) Cabinet openings Cabinet width mm Cabinet width,000 mm Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 4. DIMENSIONS (continued) Fixing the cabinets S 30.6 = M = = M 3 M = C C N N 30.6 R Fixing direct to a wall, on a frame (without lugs) Ø 9 mm E T V F U Y (Dimensions in mm) Depht Width Depth Overall depth C Dimensions of openings M N Vertical lugs Horizontal lugs Overall Overall Height Width R S () E T () U F V Y V Y () Identical centre-to-centre spacing for and Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 5/5

6 F F Atlantic Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 5. EQUIPMENT 5. Fixing equipment directly into the cabinet base (M8 screws) 5. Plain plates, Lina.5 and Lina 5 (continued) Dimensions Plain plates, Lina.5 and Lina 5 perforated Plain H E E - or slide with M8 nut adjustment (optional) F G E Adjustment of equipment Possible in x cabinets. With Cat. No /44/45. set of 4 slides for cabinets with, and mm depth. Lina.5 details Ø Ø Lina.5 details Plain plates, Lina.5 and Lina 5 Galvanised steel plain plates and Lina.5 Lina.5: drilled for the installation of equipment without marking out, automatic squaring. Lina 5: galvanised steel Ø 6.5 Lina,5 Lina 5 Ø XX XX XX Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 6/5

7 Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 Dimensions in mm (continued) Plain plates, Lina.5 and Lina 5 perforated Plain plates, Lina Usable Fixing plates Plain Lina,5 Lina 5.5 / Lina 5 equipment Height Larg. G H area (dm ) F E Cat. No Cat. No Cat. No () () () () () () () () () () () () () For use in horizontal (cabinets whose dimensions are reversed) or vertical mounting. 5.3 Sectioned uprights and Lina 5 rails for building chassis Lina 5 sectioned uprights Cat. Nos /5/5/53/54/55/56 Cat. Nos /59 Cuttable sectioned uprights Cat. Nos () Sawing point for 5 mm pitch uprights. The other two allow you to obtain the length of upright Cat. Nos /5/5/53/54/55/56. Sawing point ( 6 Cabinet height Upright length Upright (set of ) m length of upright to cut to size Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 7/5

8 Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/ Rails /8/8/83/84/85/ Cabinet width Rail length m rail to cut to length asymmetrical in accordance with EN symmetrical 3 depth 5 mm symmetrical 4 depth 7.5 mm with oblongs symmetrical 3 depth 5 mm with oblongs Rail catalogue number Assembled chassis with uprights and Lina 5 rails (continued) Enclosure dimensions Height of uprights 5.5 Internal doors RAL 7035 Rail length Chassis fixing Height Width A D B C xx Assembled chassis with uprights and Lina 5 rails + = /4 Fitted using IP xxb Glass fibre loaded polyester, thickness: 4 mm Self-extinguishing up to 960 C in accordance with IEC EN Includes grid on rear face. Centre marking on front face. Distance between cabinet door and internal door adjustable: 4 to 50 mm for Atlantic cabinets. Includes grip for left or right hand opening. Captive hinge pins. Twin bar bolt: bolt for - mm height, bolts for 700 mm height or greater. Accept key-lock barrels and other inserts. Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 8/5

9 5.5 Internal doors RAL 7035 (continued) H x L Dim. Height x Width Usable dims. Height x Width Internal door Cat. Nos x 34 x x x 44 x x x 54 x x x 64 x 436 x x 74 x 536 x x 94 x 736 x Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/ VDI chassis Allows 9" VDI equipment to be fitted into Atlantic cabinets of or mm width and with a min. depth of mm. For mm width cabinets the chassis allows the inclusion of VDI equipment from the XL VDI mini cabinet. May be fixed directly to the wall to produce a wall chassis (without a cabinet). 00 x 94 x 736 x () () Door identical to with upper or lower reserve of 00 mm. 5.6 Chassis with insulating faceplates in RAL 7035 Rail Faceplate Blanking plate End strip A Cabinet Chassis H x W x D Capacity x x rows of 0 modules x x rows of 6 modules x x rows of 6 modules 700 x x rows of modules x x rows of 7 modules 000 x x rows of 38 modules 00 x x rows of 38 modules B Chassis mounting plate Chassis Mounting plate H x W x D For power devices x x DPX 5, DPX 60 or Vistop 60A A B x x x x DPX 5, DPX 60 DPX ER Vistop 60A or Vistop A Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 9/5

10 Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/ VDI chassis (continued) Atlantic Capacity 6U / U / 6U A B 465 mm centre-to-centre spacing (9") Usable space 45 mm 465 mm centre-to-centre spacing (9") Chassis Capacity Cat. Nos Dimensions Usable dimensions below door A B U x x U x x U x x U x x U x x U x x U x x U x x U x x U x x U x x Fixing the cabinet Direct to the wall or with fixing lugs / S R Fixing direct to a wall, on a frame (without lugs) Ø 9 mm E T V F U Y Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 0/5

11 Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/ Fixing the cabinet (continued) Direct to the wall or with fixing lugs (dimensions in mm) Vertical lugs Centreto-centre spacing Horizontal lugs Centreto-centre spacing Overall Overall Height Width R S () E T () U F V Y V Y () Identical centre-to-centre spacing for and Floor fixing on frame , Fixing on post Cat. Nos /47/48/49 Frame /37 (height 03/603 mm) Stabilising feet (option) Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 /5

12 C Atlantic Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/ Fixing the cabinet (continued) Floor fixing on plinth Front and side vents RAL 70 Depth et mm 5. EQUIPEMENTS (continued) 5.9 Roofs Steel RAL mm forward or backward adjustment Roof Cat. No. Width Depth Max. 0 Max. 0 Cat. Nos C / Front vent opening 50 View from below - Floor fixing H Ø /54/ /57/6/ /6 00 Hole Ø 7 F 5 G 49 J View from above - Cabinet fixing Side vent openings E L Ø 9 D 65 B 5 69 C A L x D A B C D E F G H J L x x x x x x x x x x Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 /5

13 6. ACCESSORIES 6. Cable entry plates IP55 Cabstop plates Cable entries comprising a cable-clamp jaw providing mechanical grip and elastomeric zones providing sealing. May be pierced directly using the cable (no tool required). Fits perfectly around the cable. Cable replacement possible. Fire resistant polypropylene RAL The cable entry plates have several piercable holes of various sizes: from Ø 5 to 4 mm, Ø 4 to 4 mm and reserved rectangular areas. Performance: Resistance to cutting oils ASTM no. 3 Resistance to glow wire: 750 C in accordance with IEC Resistance to tearing: 5 kg minimum Operating temperature: from -0 C to +65 C A foam seal with a 6 x 0 cross-section ensures sealing between the plates. Elastomeric pad Sealed assembly Elastomeric sealing cone Pre-cut Insulating Cable-clamp jaw Cable Ø 4-4 mm cable entry equivalent to cable gland PG /9 - ISO 5/3 Ø 5-4 mm cable entry equivalent to PG 9//3/6 - ISO 6/0 Good resistance to sodium chloride (5%), sulphuric acid (98%) and caustic soda (50%). Plate For x 00 size cabinets 3 Ø 5-4 mm entries 0 Ø 4-4 mm entry Plate For x 00/ size cabinets 3 Ø 5-4 mm entries Ø 4-4 mm entry rectangular area 98 x 0 Plate For x 000 x / size cabinets 8 Ø 5-4 mm entries Ø4-4 mm entries 97 rectangular area 97 x 0 40 Plate For x to size cabinets x to and 00 x / 8 Ø 5-4 mm entries Ø 4-4 mm entries 50 rectangular areas 97 x 45 IP 43 cable entry plates with brush, For cabinet or mm width Usable opening 385 x 30 mm IP55 plate with multiple entry cable gland For cabinet or mm width Supplied with cable gland, ISO Each cable gland is suitable for four UTP/FTP/SFTP cables (Ø 6.5 to 9.5 mm). Equipped leads may be passed through without disassembling the cable gland. Supplied with grommets for unused entries Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 6. ACCESSORIES (continued) 6. Hinged inspection windows IP 54 Frame in anodised aluminium, 0 opening. 3 mm thick polycarbonate window. Neoprene seal. Lock with key 455. Supplied with cutting template. Protect equipment, avoid inappropriate handling and allow viewing of the equipment at the front. A External dimensions 6.3 Pochettes à plans plastique adhésives , 340 x 35 mm (Internal dimensions : 30 x 00 x 8 mm) and , 60 x 65 mm (Internal dimensions : 30 x 30 x 8 mm). Open RAL , 35 x 0 mm (Internal dimensions : 34 x 0 x 8 mm) Closed IP50. RAL 900. Capacity of 5 A4 sheets folded in , 305 x 0 mm (A4 format) Flexible transparent. Window dimensions Height Width Prof. Height Width Usable Depth B E D Dimensions A B D E Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 3/5

14 Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 6. ACCESSORIES (continued) 6.4 Door contact A - 40 V N/C contact - N/O contact Allows, for example, the air conditioning to be cut and the lighting to be switched on when the cabinet door is opened. Supplied with fixing brackets. 6. ACCESSORIES (continued) 6.7 Closures Fitted with latch up to mm height and handle above mm Locks using key 433A. Single locking point. Possible to replace the lock barrel with an insert. Bolt Handle Number of locking points 6.5 Lighting kit Supplied with a Ø 6 mm 8W 30V 50 Hz fluorescent tube Class I - IP0 Interference suppression to EN 5 Equipped with an switch Connection to strip Dimensions: 350 x 6 x 37 mm 6.6 Terminal block support Set of two support brackets for copper bar or terminal block rail. point 3 points points 3 points Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 4/5

15 6. ACCESSORIES (continued) 6.7 Closures (continued) Height Width Number of locking points Cat. No(s): /0/0/03/04/05/06/07/08/09/0// /7/8/0///3/4/6/7/8/9/30/3/3/33/34/ /90/9/9/93/94/95/96/97/ /93/94/95/96/97 6. ACCESSORIES (continued) 6.7 Closures (continued) Metal inserts Key-lock barrel Designation mm square female mm square male mm triangular male mm triangular male mm triangular male (EDF) Double bar Key code E A A Cat. Nos Bolt Handle with blank Handle 433A with key CNOMO closure kit equipped with a 6.5 mm male triangle closure. Technical sheet: F00890EN/0 Updated: 4/03/0 Created: 4/03/009 5/5