XL³ 400 metal distribution cabinets, free-standing enclosures and cable compartments
|
|
|
- Scot Rogers
- 5 years ago
- Views:
Transcription
1 87045 LIMOGES Cedex Telephone : Fax : XL³ 400 metal distribution cabinets, free-standing Cat. No(s) : 20103/04/05/06/07/08/18/19/23/ CONTENTS PAGE 1. General characteristics Finish Range.2 4. Overall dimensions Equipment Accessories GENERAL CHARACTERISTICS Assemblable extendable metal distribution cabinets, free-standing, delivered unassembled with packaging reusable after assembly - Ingress protection against solids and liquids to standards IEC and NF EN 60529: IP 30 without door IP 40 with door IP 43 with door, seal and insulated cable entry panel -Mechanical impact rating to standards NF EN and NFC IK 07 without door IK 08 with door - Maximum current strength: 400 A - Maximum tolerated surge intensity Icw and associated peak current (busbars on active background): Icw : 25 ka 1s Ipk : 52,5 ka 1-1 Structure - Assembly of steel plate elements: - 1 rear panel in galvanized steel plate with 2 mounting supports perforated at 25 intervals - 4 cutaway steel sheet side panels to allow horizontal and vertical coupling, connection to cable compartments and cable feedthrough - 4 side panel support angles - Multihead fastener set (PZ, slotted, H10 head) 8, M6 x 35 qty 4, M6 nuts qty 4-1 insulated cable entry panel for IP 43 (supplied) - Wall-mounted by rear panel or by external mounting brackets (to be ordered separately) - Reversible metal doors with or without window, flat or curved, delivered with handle (without barrel), angle of opening 120 (to be ordered separately) - Capacity: 24 modules per row 1. GENERAL CHARACTERISTICS (cont.) 1-2 Standard conformity - Legrand cabinets and free-standing are designed in compliance with all the relevant international standards. IEC Degree of protection provided by (IP code) EN NFC Degree of protection provided by NF EN of electrical equipment against external mechanical impact (IK code) IEC NF EN IEC NF EN Low voltage switchgear and controlgear assemblies Low voltage switchgear and controlgear assemblies 1-3 Resistance to climatic conditions : - Salt spray: 1000 h - Operating temperature: - 5 C to + 40 C - Storage temperature: - 10 C to + 70 C 1-4 Fire resistance : - Glow wire resistance 750 C / 5 s to IEC FINISH 2-1 Outer housing - Rear panel in galvanized steel plate th. 10/10 - Cutaway side panels in steel plate th. 10/10 colour grey RAL Cutaway upper and lower panels in painted steel plate th. 10/10 colour grey RAL Faceplate in painted steel plate th. 10/10 colour grey RAL 7035 (to be ordered separately) - Plinth in painted steel plate th. 10/10 colour grey RAL Metal door th. 10/10 colour grey RAL Insulating cable entry panel th Coating - Beige RAL 7035 epoxy polyester powder-coated paint coating thickness 50/70 µ. Technical sheet : F00249EN/02 Updated : 03/09/2010 Created : 14/12/2004
2 3. RANGE 3-1 Metal cabinets - Delivered in kit form with mounting supports on backpanel, cutaway cable entry panel, metal side panels and screws for horizontal and vertical coupling depth Weight , , , , , , Cable compartments for metal cabinets - Delivery as for cabinets depth Weight , , , , OVERALL DIMENSIONS () A B C without door C flat door C curved door Note : Dimension C does not include the handle Dimension A includes the plinth D E Metal cabinets - Delivered in kit form with mounting supports on rear panel, insulated cutaway cable entry panel, metal side panel and screws for horizontal and vertical coupling, plinth 100. depth Weigh , Cable compartments for metal cabinets - Delivery as for cabinets depth Weigh , Wall mounting
3 4. OVERALL DIMENSIONS (cont.) 4-2 Passthrough - Mounting supports Steel profiled mounting supports with 3 alternating perforations - Perforated at 25 intervals for fixing nut clips 5. EQUIPMENT - Insulated cable entry panel th. 3 (mandatory installation for IP 43) allowing cable feedthrough by cutaway or cable gland Glow-wire resistance 750 C / 5s. - Perforated at 25 intervals for fixing rail support brackets - Plinth in painted steel plate th. 10/10 delivered unassembled : 100 Colour grey RAL 7004 Fixing accessories included: 4 M6 nuts, 4 M6 screws x 15, 4 M6 F- head screws x 10 - Perforated at 25 intervals (diameter 4.5 ) for screw attachments - Passthrough under rail and fixing plate - Cabinets Rail x 76 Upper position 420 x 50 Lower position x 90 Fixing plate x x x x x x x x x x x x 33 - Cable compartments Rail x 90 Fixing plate x x x x 33 Plinths can be coupled Sealable ¼-turn fix and release faceplates
4 Sealable ¼-turn fix and release faceplates - Plain faceplates for cabinets and free-standing Metal Insulated () Faceplates for modular rail-mounted devices Metal Insulated () For devices on fixing plate in vertical position Metal Insulated () For devices on fixing plate in horizontal position Metal Insulated () Plain faceplates for cable compartments Metal Insulated Hauteur () Doors supplied with handle Interchangeable barrel (to be ordered separately) - Curved doors for cabinets and cabinets Metal Transparent () Cabinet/door distance () Metal Transp / Flat doors for cabinets and cabinets Metal Transparent () Cabinet/door distance () Metal Transp / Flat doors for cable compartments Metal () Cabinet/door distance () / Blue tariff kit for main circuit-breaker up to 90 A mono and 60 A tetra - Faceplates for cable compartment devices Metal Insulated ()
5 for main circuit-breaker and three-phase electronic meter Mounting on omega rail in cabinets and free-standing Device for modular products and Vistop up to 160 A position device for modular products and Vistop up to 160 A, DPXIS 250, DPX 125, 160 and 250 ER Fixing plate for DPX Fixing plate for DPX 160 and DPX 250 ER Fixing plate for DPXIS module rail spacer for use with Universal adjustable fixing device Universal rail Plate fixture in cabinets and free-standing Yellow tariff fixing plate for DPX 250 ER horizontal assembly in cabinets and free-standing for DPX 250 ER vertical assembly in cable compartment for DPX 630 calibrated 400 A vertical assembly in cabinets and free-standing for DPX 630 calibrated 400 A vertical assembly in cable compartment - Fixed version devices on plate in vertical position For 1 to 2 DPXIS For 1DPXIS For 1 to 3 DPX 125, DPX 160 or DPX 250 ER For 1 to 3 DPX 125, DPX 160 or DPX 250 ER with downstream RCD For 1 to 2 DPX 250 or 1DPX 630 calibrated 400 A and 1DPX 250 or 1 DPX 630 or 1 DPX 250 with distribution block For 1 DPX 250 or 1 DPX 630 calibrated 400 A in centre position For 1 to 2 DPX 250 RCD or 1 DPX 630 calibrated 400 and 1 DPX 250 RCD or 1 DPX 630 or 1 DPX 250 RCD with 1 distribution block For 1 DPX 250 or 1 DPX 630 calibrated 400 A with RCD in centre position - Fixed version devices on plate in horizontal position for DPXIS 250 and DPX 250 ER vertical assembly for DPXIS 630 and DPX 630 calibrated 400 A vertical assembly l For 1 DPX 125 or DPX 160 with or without downstream RCD For 1 DPX 250 ER or without downstream RCD For 1 DPX 250 ER with or without downstream RCD
6 Rail fixing in cable compartments - Device for modular products and Vistop up to 160 A 6. ACCESSORIES (cont.) Nut clips for mounting supports Nut for M6 screw M6 screw Comprises one rail and 2 fixing brackets with capacity for 9 modules Plate fixture in cable compartments - For vertically-mounted devices Fixing plate for DPX 125, 160 or 250 ER Fixing plate for DPX 125, 160 or 250 ER with downstream RCD Fixing plate for DPX 250 or DPX Fixing plate for DPX 250 or DPX 630 calibrated 400 ER with downstream RCD 6. ACCESSORIES IP 43 seal Flush mounting frame for cabinets and free-standing H 600 to Support for terminal strips, earth terminal etc., for cable compartments Partition for horizontal division of cabinets and freestanding Set of 4 metal brackets for wall mounted cables l Nut clips for perforated fixing plates For M4 screws For M5 screws Wire guides Insulated M 6 screw For horizontal wiring For vertical wiring Fixing support for Lina 25 cable ducting Insulated rivet Wire guides For cabinets and free-standing For cable compartments Plinths For cabinets and free-standing For cable compartments Insulated fixing support Cable entry panels Insulated cutaway panel for cabinets and freestanding Universal perforated fixing plates for cabinets and free-standing for cabinets and free-standing for cable compartments Finishing strip for DLP / cabinet connection Blanks Cutaway 24-module blanking plate Breakaway 18-module adjustable strip, separation by module or ½-module Clip-on adhesive label holder
7 6. ACCESSORIES (cont.) Door accessories - Key barrels and knockout for metal or transparent doors, with 2 keys Type Type Type 1242E Type 2433A Double bar knockout - Adhesive transparent document holder Flexible plastic A Rigid plastic IP 50 Connection for protective conductors Flat bar 12 x 2 for IP2X terminal blocks Holed bar Stirrup Copper bar 12 x Copper bar 12 x 4 with M 5 tapped holes Support for bars Cat. Nos 37301/02/89 and bar Cat. No Connector for conductor 1.5 ² Connector for conductor 6 to 16 ² Connector for conductor 10 to 35 ² Connector for bar 12 x 4 with tapped holes Equipotential connector cable 6 ² Paint spray RAL 7035
Plexo 3 weatherproof cabinets
87045 LIMOGES Cedex Telephone: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 Plexo 3 weatherproof cabinets CONTENTS PAGES 1. Description, use.....1 2. Range, equivalence table...1 3. Overall dimensions...2
XL Distribution enclosures WORKSHOP SPECIFICATIONS
800 Distribution enclosures WORKSHOP SPECIFICATIONS With its extensive ranges, the Legrand offer meets your quality standards and provides real freedom and simplicity of installation together with acknowledged
CABINETS AND ENCLOSURES. XL³ 400 and XL³ 800 GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES
O S O O CABINETS AND ENCLOSURES XL³ 400 and XL³ 800 GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES II With its extensive ranges, the Legrand offer meets your quality standards and
workshop specifications Plexo³ IP 65 cabinets
workshop specifications Plexo³ IP 65 THE GLOBL SPECILIST IN ELECTRICL ND DIGITL BUILDING INFRSTRUCTURES With their IP 65 weatherproof protection and optimised dimensions, Plexo³, from 2 to 4 x 18 modules,
Prisma Plus G enclosures IP30, IP31, IP43 enclosures
Prisma Plus G IP30, IP31, IP43 Prisma Plus G IP30, IP31, IP43 Presentation For safe and upgradeable electrical switchboards > Safety of people and property > Continuity of service > Optimization and upgradeability
R.C.B.O. SP / 1 module
87045 LIMOGES Cedex - France Telephone : (+33) 5 55 06 87 87 Fax : (+33) 5 55 06 88 88 R.C.B.O. SP / 1 module 6064 04 6064 64 05 6064 10 6064 11 6064 12 CONTENTS PAGES 1. Description, use... 1 2. Range...
XL 3 -N SimPly, EfficiEnt And SAfE. 3 - PHASE distribution boards up to 250 A
XL 3 -N 125 250 SimPly, EfficiEnt And SAfE 3 - PHASE distribution boards up to 250 A the global specialist in ElEctricAl And digital building infrastructures Xl 3 -n Comprehensive and reliable range for
IP65 enclosures orion plus
IP65 enclosures orion plus One system for indoor and outdoor application Sheet steel or glass reinforced polyester - the orion plus enclosures are suited for harshest conditions and can be applied for
Vistop TM isolating switches 63 to 160A
DX 3 - IS main switches 16 to 125A Vistop TM isolating switches 63 to 160A 225 15 225 18 4 064 00 4 064 59 Pack Cat. No. Main switches AC 22 A category as per EN607-3 Grey handle Accept 1 signalling auxiliary
Viale Borri Varese - Italy IDROBOARD weatherproof cabinets Cat. Nos :
Viale Borri 231 21100 Varese - Italy IDROBOARD weatherproof cabinets Cat. Nos : Index Pages 1. Description - Use... 2 2. Range...2 3. Overall dimensions...2 4. General characteristics...3 5. Setting in
Spacial SF for Prisma Plus P system
The Spacial SF range includes specific enclosure models for installing the Prisma Plus P : functional units and vertical and horizontal busbars The panels are subject to type tests according to standard
DNX 3 MCB 4500 A / 6 ka Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DNX 3 MCB 4500 A / 6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation
, , PREPARATION - CONNECTION. Mounting:. On symmetrical EN rail or DIN 35 rail
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX 3 4500 A / 6 ka CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
Phase + Neutral, neutral on right side
87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX 3 MCB 6000 A / 10 ka Cat.. N (s): 4 074 67 / 68 / 69 / 70 / 71 / 72 / 73 / 74 / 75 / 76 / 77 / 78 / 79 ; 4 077 33 / 34
(1,5 modules per pole)
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 DX 3 MCB 36kA, 80A CONTENTS PAGES 1. Description - Use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
up to 63 A (1 module per pole)
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 Direct current MCB DX 3 16kA, up to 63 A (1 module per pole) CONTENTS PAGE 1. Description - Use... 1 2. Range... 1 3. Overall dimensions...
DX³ RCBO 4500/6 ka Phase + Neutral, neutral on left
87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX³ RCBO 4500/6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation Connection...
DX³ RCCBs - ID 4P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ s - ID CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
Marina Cabinets LIMOGES Cedex Telephone: Fax:
87045 LIMOGES Cedex Telephone: 0 5 55 06 87 87 - Fax: 0 5 55 06 88 88 Marina s CONTENTS Page 1. Main characteristics...1 2. Range....1 3. Technical characteristics...1 4. Dimensions....3 5. Equipments...4
19" XL VDI wall mounting cabinets and accessories
19" XL VDI wall mounting cabinets and accessories 340 36 340 38 340 49 340 52 332 25 331 36 Technical characteristics (p. 814-815) IP 20 - IK 08 Equipped with: 1 reversible curved door made of screen-printed
TX³ RCCBs 2P up to 100 A
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 TX³ RCCBs CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX 3 MCB 10000 A / 16 ka CONTENTS PAGE 1. Description, use...1 2. Range...1 3. Overall dimensions...1 4. Preparation - Connection...1
LineaSPACE flush-mounting cabinets 8, 12 & 18 modules
Catalogue number(s): F315P8/PB8/PS8/P12/PB12/PS12/P24/ PB24/PS24/F315P36D3/F315PB36D3/PS36D3/P18/PB18/PS18/P36D2/ PB36D2/F315PS36D2/P54/PB54 Contents Pages 1. Description, use... 2 2. Range...2 3. Dimensions...2
DX³ 4-pole RCBO 6000 A/10 ka
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ 4-pole RCBO CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
Relax... you re in safe hands CONSUMER UNITS / PRODUCT GUIDE.
Relax... you re in safe hands CONSUMER UNITS / PRODUCT GUIDE Distributor : LEGRAND ELECTRIC LIMITED Great King Street North, Birmingham, B19 2LF Tel : 0870 608 9000 Fax : 0870 608 9004 CONSUMER UNIT BRO.10.05.??K
87045 LIMOGES Cedex. 2. PRODUCT RANGE (continued) 1. DESCRIPTION - USE. Breaking capacity : Symbol : Technology : 3. OVERALL DIMENSIONS
87045 LIMOGES Cedex Phone : + 33 5 55 06 87 87 Fax : + 33 5 55 06 88 88 R.C.B.O. DX 6000 A Phase + Neutral,, neutral on right side Cat. n (s) : 077 31 077 44-077 77 077 84 078 79 079 01-083 95 084 06 084
3/2 Introduction. Unequipped Distribution Boards (Flat Pack) 3/6 8GK1 surface-mounting distribution boards
ALPHA 400 - DIN Wall-Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards (Flat Pack) /6 8GK1 surface-mounting distribution boards Pre-Assembled Unequipped Distribution Boards /7
2. RANGE. RAL 7035 Cabinets Vertical version (external dimensions in mm) Square version (external dimensions in mm) Supplied with plain plate (2) (1)
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Atlantic Cat. No(s): 0 355 00/0/0/03/04/05/06/07/08/09/0//4 0 355 5/7/8/0///3/4/6/7/8/9/30/3/3/33/34/36 0 355 37/90/9/9/93/94/95/96/97/98-0
Linkeo 19 freestanding cabinets
Linkeo 19 freestanding cabinets Catalogue number(s): 6 467 50/51/55/56/60/61/62/63 Page 1.Generalcharacteristics...1 2.Range...2 3. Technical characteristics.................3 4.Dimensions...4 5.Baying...8
Wall-mounting steel enclosures suitable for any CRN and CRNG application
Wall-mounting steel enclosures suitable for any CRN and CRNG application 1 2 3 4 5 6 1 Front rain gutter prevents the entry of water, oil or liquids, ensuring IP66 protection. 10 9 8 7 1/18 2 A complete
New Plexo 3, all the space you need
New Plexo 3, all the space you need IP 65 WEATHERPROOF ENCLOSURES No constraints on your wiring: plenty of space inside the box 2 PLEXO 3 - PLENTY OF SPACE FOR YOUR CONVENIENCE A wide range of enclosures
DPX moulded case circuit breakers
BREAKING AND PROTECTION DEVICES 10 / 2011 DPX moulded case circuit breakers DPX moulded case circuit breakers offer optimum solutions for the protection requirements of commercial and industrial installations.
cabinets and equipment Atlantic, Atlantic stainless steel, Marina
cabinets and equipment Atlantic, Atlantic stainless steel, Marina EXTERNAL DIMENSIONS D ATLANTIC CABINETS (p. 276) MARINA CABINETS (p. 286) METAL IK 10 STAINLESS STEEL IP 66-IK 10 POLYESTER - IP 66 - IK
Linkeo 19 freestanding cabinets Flat-pack solutions
Page 1.Generalcharacteristics...1 2.Range...2 3. Technical characteristics.................3 4.Packaging...4 5.Dimensions...4 6.Baying...8 7.Plinths...9 8.Cablemanagement...9 9.Fankits... 11 10.PDUsupports...
DX³ RCBO 6000 A Phase + Neutral, neutral right side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX³ RCBO 6000 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation Connection... 1
RX 3 M.C.B A up to 63 A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
RX 3 M.C.B A up to 63 A
87045 LIMOGES Cedex Telephone: +33 5 55 06 87 87 FAX: +33 5 55 06 88 88 RX 3 M.C.B. 6000 A up to 63 A Cat. N (s): 4 197 49 to 4 199 23 CONTENTS PAGES 1. Description, use... 1 2. Range... 1 3. Overall dimensions...
DNX 3 MCB 4500 A / 6 ka Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DNX 3 MCB 4500 A / 6 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
Viking 3 - Screw connection Disconnect terminal blocks
87045 LIMOGES Cedex Telephone: (+33) 05 55 06 87 87 - Fax: (+33) 05 55 06 88 88 Viking 3 - Screw connection 1. General features... 1 2. Range...2 3. Standards... 2 4. Technical features... 3 5. Dimensions...
Cat N 3. OVERALL DIMENSIONS
Cat N Motor driven remote control module 87045 LIMOGES Cedex - FRANCE Telephone : + 33 5 55 06 87 87 Fax: + 33 5 55 06 88 88 Cat N : : 4 062 91 CONTENTS PAGE 1. Description - Use...1 2. Product range...1
ACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
RX 3 MCB 4500 A Phase + Neutral, neutral on left side
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 RX 3 MCB 4500 A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation - Connection...
SR1 multipurpose enclosures Enclosures for automation and distribution applications
AU TO M AT I O N B OA R D S SR1 multipurpose enclosures Enclosures for automation and distribution applications Complete range of monobloc enclosures for small and mediumsize automation, command and distribution
New DX 3 High rating & breaking capacity
New High rating & breaking capacity a new range OF MOduLar CirCuiT BrEakErs up TO 125 a T new dx³ MCBs AN ENHANCED range for HIgH-pErforMANCE INstALLAtIoNs DX³ : the new Legrand MCBs with dx³, Legrand
Flush mounting enclosures. Pragma UP
Flush mounting enclosures Presentation Flush mounting enclosures The appearance of this enclosure, its mechanical strength and its level of electrical safety make it a product fully suitable for residential
DX³ RCBO 6000A Phase + Neutral, neutral on left
87045 LIMOGES Cedex Telephone number: +33 (0)5 55 06 87 87 Fax: +33 (0)5 55 06 88 88 DX³ RCBO 6000A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation Connection...
DX³ RCBO 6000 / 10 ka Phase + Neutral, neutral on left
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 DX³ RCBO 6000 / 10 ka CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation Connection...
LEXIC Curv LIMOGES Cedex. Cats N (s) : /68/87/88, /48, /84/85, /76/77/95/96/97, /71/72 1.
87045 LIMOGES Cedex Téléphone : 05 55 06 87 87 Télécopie : 05 55 06 88 88 LEXIC MCB s DX-H 80A, 100A, 125A Curv urves B and C CONTENTS PAGES 1. Description, use...1 2. Range...1 3. Overall dimensions...1
Cat. N (s) : /65/66/83/84, /94/95/96/99, /01/02/06/07/11/12/13/14. Pollution degree : C / + 40 C. .
87045 LIMOGES Cedex Telephone : (+33) 05 55 06 87 87 Fax : (+ 33) 05 55 06 88 88 R.C.C.B. s 0090 00/01/02/06/07/11/12/13/14 0/01/02/06/07/11/12/13/14/18/19/23/24/25/26/ /18/19/23/24/25/26/45/46 45/46 0090
EASYBOX Series. Weather-proof enclosures
EASYBOX Series Weatherproof enclosures EASYBOX Series WEATHERPROOF ENCLOSURES IP65 REFERENCE STANDARDS INTERNATIONAL STANDARD IEC 60670 (989) plus Modification (994) Enclosures for accessories for fixed
Plexo IP 55 to IP 66. Makes your day, rain or shine PLEXO / WEATHERPROOF WIRING DEVICES
Plexo IP 55 to IP 66 Makes your day, rain or shine PLEXO / WEATHERPROOF WIRING DEVICES Plexo IP 55 Ingenious features for easy installation > > Time saving guaranteed: no cut-out Uncut pier ceable membrane
Domae. The right solution for distribution boards
Domae The right solution for distribution boards Guaranteed quality and adapted solutions Domae : SIRIM approved The quality marks prove product conformity to their reference standard. They guarantee:
DLPlus Mini-Trunking LIMOGES Cedex. Phone : Fax :
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 DLPlus Mini-Trunking Number(s) : 0 300 04/07/08//14/15/21/22/26/27/33, 0 302 07 to 0 302 93, 0 301 /12/14/91/93, 0 306 54/67, 0 303 00/03/16/26,
DX³ RCBO 6000A Phase + Neutral, neutral on right
87045 LIMOGES Cedex Telephone number: +33 5 55 06 87 87 Fax: +33 5 55 06 88 88 DX³ RCBO 6000A CONTENTS PAGE 1. Description, use... 1 2. Range... 1 3. Overall dimensions... 1 4. Preparation Connection...
ENYSTAR Load Centers up to 250 A
PASSION FOR POWER. up to 250 A according to IEC 61439-3 for commercial and industrial buildings Download at www.hensel-electric.en made in GERMANY since 1931 up to 250 A according to IEC 61439-3 for commercial
DPX 160 Thermal magnetic and trip-free switches DPX-I 160
87045 LIMOGES Cedex Phone : +33 05 55 06 87 87 FAX : +33 05 55 06 88 88 DPX 160 CONTENTS PAGES 1. USE 1 2. RANGE 1 3. DIMENSIONS 1 3. DIMENSIONS (NEXT) 2 4. OVERVIEW 2 5. CONNECTION 2 6. ELECTRICAL AND
Low Voltage Main Distribution Board
s M series... Low Voltage Main Distribution Board Safe and intelligent power distribution Whether in industrial plants, in infrastructure or in buildings, all technical plant depends on the reliable supply
483 mm (19 ) Server Cabinet Unique Series. Abstract. Features. 1.5 mm strong steel sheet. Load capacity up to 1000 kg. Standard colors grey and black
483 mm (19 ) Server Cabinet Unique Series 1.5 mm strong steel sheet Load capacity up to 1000 kg Standard colors grey and black Large range of equipment available DN-19 SRV-42U-8/12 Abstract 483 mm (19
LEGRAND CABLING SYSTEM 2 PERFORMANCE FROM TECHNICAL ROOM TO WORKSTATION
LEGRAND CABLING SYSTEM 2 PERFORMANCE FROM TECHNICAL ROOM TO WORKSTATION 02 LCS 2 from technical room to workstation LCS 2 LCS 2 Cabling system products Complete systems with a 20-year guarantee. The new
Distribution Boards AT/U Series
2-0 Distribution Boards AT/U Series Index Pages Product Features 2-3 AT/U Series Ordering Information 2-6 Equipped Distribution Boards 125 mm Distance Between Rows 2-10 Equipped Distribution Boards 150
An electrical panel capable of evolving
An electrical panel capable of evolving Prisma TT Low voltage factory built assemblies Buildings Commercial & Industrial Make the most of your energy General For a dependable electrical installation Total
P17 combined units LIMOGES Cedex Telephone : Fax : Cat. No.(s) : 566 XX XX XX XX
8704 LIMOGES Cedex Telephone : + 33 0 06 87 87 - Fax : + 33 0 06 88 88 P17 combined units Cat. No.(s) : 66 XX - 72 XX - 77 XX - 89 XX CONTENTS Page 1. Description...1 2. Use...1 3. Range.......................
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL
IVS Distribution System. IVS - Table of Contents
IVS - Table of Contents Overview System characteristics IVS System description Sheet steel wall-mounted DB for residential & functional buildings - IP30 Sheet steel wall-mounted DB for industrial applications
photovoltaic NEW Safe product solutions conforming to standards for Industrial Electrical Power Distribution Systems with extended product range
Professional Photovoltaic Distributors NEW with extended product range 10 11 Safe product solutions conforming to standards for photovoltaic plants Industrial Electrical Power Distribution Systems Solar
4 Electrical cabinets, boxes and accessorizes
Electrical cabinets, boxes and accessorizes Enclosures and boxes for installation of modular devices.........190 Plastic enclosures and boxes....................................................190 Modular
Zucchini Low-Medium Power
Zucchini Low-Medium Power High Power CATALOGUE 2010 CATALOGUE 2010-2011 ZHP08C/GB Coordination table with Legrand DPX MCCBs SL, MS, SB, MR Switch-Busbar coordination table. Contingent short circuit ka
EWC-PC POWER CENTER FOR LOW VOLTAGE POWER DISTRIBUTION UP TO 6300A POWER CENTER
EWC-PC POWER CENTER FOR LOW VOLTAGE POWER DISTRIBUTION UP TO 6300A POWER CENTER 1 1.General description EWC-PC Power Center is a LV distribution switchboard particulary suitable for applications requiring
n Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars
www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues
APO ENCLOSURES. The bases are made of grey (RAL 7036), hot moulded glass fibre reinforced polyester
APO ENCLOSURES APO - Modular polyester boxes - Complete with Base and Grey Lid IEC 60439-1 EN 60439-1 The range consists of nine boxes based on the 300 and 185 mm modules. IEC 60529 EN 60529 The bases
LB - LIGHTING BUSWAY 25-40A
16 LB - LIGHTING BUSWAY 25-40A LIGHTING BUSWAY SECTION CONTENTS 18 General features 24 Trunking components: 2 and 4 conductors elements 28 Trunking components: 6 conductors elements 30 Plugs 33 Fixing
Applications Profitronic 19 / Profitronic 19U
Applications Profitronic 19 / Profitronic 19U 54 Enclosure in variable length version using profile technology Standard construction or version with connection compartment Optional Polycarbonate transparent
Kaedra Weatherproof DIN Type Enclosures
Multi 9 System Catalog Section 6 Additional System Devices Kaedra Weatherproof DIN Type Enclosures Applications Expandable enclosures for service, industrial, or equipment applications Protects against
DOMINO Series surface mounting IP55
Series surface mounting IP55 SERIES CONSUMER UNITS SURFACE MOUNTING VERSION - IP55 REFERENCE STANDARDS International standard IEC 60670 (989) and the Modification (994) Part : General requirements for
Greater protection UNDERSTANDING THE 17TH EDITION CONSUMER UNITS / PRODUCT GUIDE
Greater protection UNDERSTANDING THE 17TH EDITION CONSUMER UNITS / PRODUCT GUIDE Summary of changes Simplifying the 17 th Edition Understanding new regulations is never easy... that s why we ve tried to
CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate
www.bcp-group.co.id CS Wall-Mounted Sheet Steel Enclosures with Mounting Plate Product Information CS Wall-mounted Sheet Steel Enclosures with Mounting Plate Accessories PT. Berkah Cipta Persada Kota Deltamas
DMX 3 -I 2500 switch disconnectors
8704 LIMOGES Cedex Telephone : 0 0 87 87 Fax : 0 0 88 88 DMX 3 200 circuit breakers DMX 3 -I 200 switch disconnectors References: 0 28 20 / 21 / 22 / 23 / 24 / 2 / 2 / 30 / 31/ 32/ 33/ 34 / 3 / 3 / 40
Equipment model: auxiliary control. Pack Cat.Nos 10/16 A V± P + T shuttered module module
transformers and buzzers and bells socket outlets and special supports 042 25 042 52 041 07 042 80 042 85 Pack Cat.Nos Bell transformers dconform to IEC / EN 61558-2-8 Protected against overloads and short
with Vacuum Circuit Breaker HAF
M E T A L - C L A D S W I T C H G E A R Safety and Reliability with Vacuum Circuit Breaker HAF Flexible Design and Compact with Vacuum Circuit Breaker HVF Easy Installation and Maintenance We build a better
Spacial 3D steel enclosure 19"
19" The Spacial 3D 19" enclosure offer, for electronics and networks, comprises 2 ranges: - 1-body enclosures, depth 400 mm, with fi xed or swing rack. - 2-body enclosures, depths 400 and 500 mm. Technical
US Catalog March 2017 Wall-mount enclosures for automation
US Catalog March 2017 all-mount enclosures for automation all-mount enclosures for automation SR2 Enclosures SRX Enclosures Gemini Enclosures 1 2 US Catalog all-mount Enclosures for Automation 1/1 1 1/2
INDIAN INSTITUTE OF TECHNOLOGY KANPUR
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Tender Notice No. 40/Elect./2018 SCHEDULE OF QUANTITY Name of Work: Electrical work for the Clean Room at NCFlexE IIT Kanpur. Name of the Contractor S. No Description
Approvals (p. 906) 0 371 61 0 371 63 0 371 64 0 371 66 0 371 69 0 371 68 0 371 00 0 371 08 0 371 20 Connecting (p. 300) 1 connection - 1 entry/1 outlet ELECTRICAL FUNCTION TERMINAL BLOCKS INSULATION EQUIPOTENTIAL
MR - MEDIUM RATING A
88 MR - MEDIUM RATING 160-1000A SECTION CONTENTS 90 General features 96 Advantages 100 Illustrated contents MR MEDIUM RATING 102 Trunking components 110 Feed units and end covers 113 Tap-off boxes 118
Composition accessories Locking system
- SM Composition accessories Locking system Handle for shape inserts and cylindrical barrels Handle lock allowing the door to be opened: with a single movement. Standard handle for the entire range of
WORKSHOP SPECIFICATIONS
WORKSHOP SPECIFICATIONS DPX 3 160 & 250 MOULDED CASE CIRCUIT BREAKERS THE GLOBAL SPECIALIST IN ELECTRICAL AND DIGITAL BUILDING INFRASTRUCTURES DPX 3 RANGE Not only do DPX³ 160 and DPX 3 250 MCCBs provide
Cabinets PROLINE. Modifications. Overview Cabinets Climate Control Cases Subracks/ 19" chassis Modules...
Overview... 0 Cabinets Cabinets... 1 Climate Control... 2 Cases... 3 Subracks/ 19" chassis... 4 Modules... 5 41003002 Systems... 6 Power supply units... 7 Backplanes... 8 41096005 41096010 Grid Assembly
GAE MCC Modular-C. Catalogue Standardized Motor Control Centres. PT Guna Era Manufaktura
Modular-C\Standardized Motor Control Centres\ M600204.15 PT Guna Era Manufaktura Catalogue 2015 GAE MCC Modular-C Standardized Motor Control Centres General Definition Type-tested low-voltage switchgear
Cubicles Frameworks. Enclosures W=400mm. System P. 400 mm deep framework. 600 mm deep framework. Hinged front plate support frame.
Frameworks DD380800 400 mm deep framework DD380572 DD380573 DD380574 08407. Framework width W = 300 mm 08403 W = 400 mm 08404 W = 650 mm 08406 W = 800 mm 08408 W = 800 mm (650 + 150) 08407 b composition
2: Ecokit Ecokit 11 Overview A 2_ Ecokit 11 Sub Rack Configuration A 2_ Width A 2_ Height / Depth A 2_6
2: Ecokit 11 2.1 Ecokit 11 Overview 2_3 2.2 Ecokit 11 Sub Rack Configuration 2_5 2.2.1 Width 2_5 2.2.2 Height / Depth 2_6 2.2.3 Handles 2_6 2.2.4 Line Drawing 2_7 2.3 daptation Kits 2_8 2.3.1 daptation
Fiberglass Enclosures
Fiberglass Enclosures FIBREGLASS ENCLOSURES quadri in vetroresina IP66 FIBreGLASS ENCLOSURES J 7 sizes J Modular and adjustable frame J Din rails adjustable in height J Removable panels J Robust construction
CAB 3 TM marking and isolating sleeves
CAB 3 TM marking and isolating sleeves CAB 3 TM marking and isolating sleeves 388 50 388 58 388 63 Characteristics Material PA 6.6 halogen-free Installation temperature : - 5 C to + 40 C Operating temperature
GTK 80. Technical data
Industrial square suspension system with open cable duct for heavy loads Modular construction with free accessible cable duct Floor, top-mounting or wall exit options Technical data Material: connecting
Floor boxes... choice, flexibility and easy installation
Floor boxes... choice, flexibility and easy installation 2, 3 and 4 compartment raised access loor boxes and slab boxes offer complete versatility. Floor boxes are available pre-wired with power track
KAP A Plug-in Busbar Distribution System IEC ME 04
EAE Elektrik A.Ş. Akcaburgaz Mahallesi, 119. Sokak, No:1 341 Esenyurt-Istanbul-TURKEY Tel: +9 (212) 866 2 Fax: +9 (212) 886 24 2 www.eae.com.tr 2-32 A Lighting Busbar System Y A N D EN V E IT AL s ISO
SELF-CONTAINED CABINET WITH SWING-TYPE or FOLDING DOORS
GENERAL CHARACTERISTICS: * Fabricated body and base for optimum rigidity * Flat-bottomed base for easy removal of filing folders * Two welded jack supports with 4 adjusters * Shelves with attachments for
SINGLE DOOR BOXES. PAINT FINISH ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish.
ST SINGLE DOOR BOXES Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish.
Logstrup Modular System
Logstrup Modular System Omega System www.logstrup.com Minimum Downtime Logstrup has been involved in the design and manufacture of Low Voltage Systems for 50 years. The Omega Switchgear and Controlgear
DLPlus Mini-Trunking LIMOGES Cedex. Phone : Fax :
87045 LIMOGES Cedex Phone : 05 55 06 87 87 Fax : 05 55 06 88 88 CONTENTS PAGES 1.Range 1 to 2 2.Accessories 3 to 7 3.Wiring accessories frames 8 4.Material characteristics 9 5.Technical characteristics
*Discover our other ranges: Select your range of Spacial steel wall-mounting enclosures. Spacial S3DC. Spacial S3X page 5/4. Thalassa PLM page 6/12.
Spacial SDC Select your range of Spacial steel wall-mounting enclosures SDC You need an efficient, sealed multipurpose and aesthetic enclosure for an indoor industrial facility. Our solution: the Spacial