Rittal CM Compact System Enclosures

Size: px

Start display at page:

Download "Rittal CM Compact System Enclosures"

Brandon Warner
5 years ago
Views:

1 Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R

2 Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details Compact system enclosures Rittal CM, single-door...6 Compact system enclosures Rittal CM, two-door Technical details...15 Compact System Enclosures Rittal CM

The new Compact system enclosures Rittal CM combine the case benefits of the AE compact enclosure with the installation diversity of the Top enclosure system TS 8.

Compatible with TS 8 accessories NEW compatibility with TS 8 mounting components Interior installation with TS 8 accessories is facilitated by pairs of vertical rails for interior installation on the

Additional horizontal rails for interior installation in the front of the enclosure at the top and bottom provide mounting space for system lights, door operated switches, door stays and

3 The new Compact system enclosures Rittal CM combine the case benefits of the AE compact enclosure with the installation diversity of the Top enclosure system TS 8. This synergy creates infinite possibilities in the compact class. The Rittal Compact Medium is an attractive alternative to larger enclosures in the AE series, and replaces the AK series. Compatible with TS 8 accessories NEW compatibility with TS 8 mounting components Interior installation with TS 8 accessories is facilitated by pairs of vertical rails for interior installation on the side panels. This TS 8 compatibility, combined with a full range of Rittal system accessories, will transform compact system enclosures into highly flexible solutions for your applications. Additional horizontal rails for interior installation in the front of the enclosure at the top and bottom provide mounting space for system lights, door operated switches, door stays and customer-supplied parts, such as contact hazard protection covers. NEW TS 8 modular base/plinth system also suitable for Rittal CM More opportunities, coupled with lower warehousing and assembly costs this is the winning formula behind the modular base/plinth system TS 8. Compact System Enclosures Rittal CM 3

Convincing details NEW All cable entry options covered More space, more

opening and a wide range of gland plate combinations.

entry plates and groets EMC gland plate Cable glands Automatic

4 Convincing details NEW All cable entry options covered More space, more stability and more opportunities for cable entry, thanks to the large opening and a wide range of gland plate combinations. Optionally with: Section for cable entry (cable clamp strip) Cable entry plates and groets EMC gland plate Cable glands Automatic potential equalisation via assembly components of the gland plates. 4 Compact System Enclosures Rittal CM

The new Compact system enclosures Rittal CM for the configuration of compact controllers also offer a host of other important new

NEW Rapid attachment The mounting plate (folded over at the sides) is inserted at the bottom, and simply secured at the top with clips,

NEW Fold, don t swing This ensures optimum utilisation of the door space, because no swivel area is needed.

phosphating,. electrophoretic dipcoat priming, and 3.

5 The new Compact system enclosures Rittal CM for the configuration of compact controllers also offer a host of other important new installation options, in addition to the infinite possibilities afforded by interior installation with TS 8 compatibility. NEW Rapid attachment The mounting plate (folded over at the sides) is inserted at the bottom, and simply secured at the top with clips, leaving both hands free for screw fastening. NEW Fold, don t swing This ensures optimum utilisation of the door space, because no swivel area is needed. The lock insert is protected against dirt by the sliding trim panel. Exceptional qualities of Rittal CM The triple surface finish: 1. phosphating,. electrophoretic dipcoat priming, and 3. structured powder coating for optimum corrosion protection and resistance to lubricants, detergents and mechanical stresses. Doors with spot-welded, perforated assembly strips (5 pitch pattern) for universal interior installation. Perfectly sealed, thanks to the double-edged enclosure and optimum compression of the foamed-in seal. Compact System Enclosures Rittal CM 5

T Compact system enclosures Rittal CM Width: 600 800, height: 800 100 F B H G Sheet steel Enclosure: 1.5 Door:.0 Mounting plate: 3.

6 T Compact system enclosures Rittal CM Width: , height: F B H G Sheet steel Enclosure: 1.5 Door:.0 Mounting plate: 3.0 Surface finish: Enclosure and door: Dipcoat-primed, powder-coated on the outside in textured RAL 7035 Mounting plate: Zinc-plated Protection category: IP 55 with selection of the appropriate gland plates, see page 8. Enclosure with one door, r/h door hinge, may be swapped to opposite side, mounting plate, open base for individual cable entry, see page 8. Detailed drawing, see page 15. Width (B) Packs of Page Height (H) Depth (T) Mounting plate width (F) in Mounting plate height (G) in Model No. CM Door Base/plinth Components front and rear Height set Height 00 1 set Trim panels (sides) Height set Height 00 1 set Rail for interior installation for height for width Matching in depth ) punched sections with mounting flanges in width ) Support strips for door ) Cable clamp rail Lock systems Standard double-bit insert may be exchanged for lock inserts, see page 11, and folding lever handle, see page 11. 1) in Cat. 31. To order primed enclosures, please add extension.800 to the Model No. Delivery times available on request. Interface flaps as prograing interface, for maintenance access and for connecting to network structures. Model No. see Innovations 005, page 86. Base/plinth One Model No. for the base/plinth components front and rear. One Model No. for the base/plinth trim panels at the sides. One complete base/ plinth. 6 Compact System Enclosures Rittal CM

T Compact system enclosures Rittal CM Width: 1000 100, height: 1000 1400 F B H G Sheet steel Enclosure: 1.5 Door:.0 Mounting plate: 3.

7 T Compact system enclosures Rittal CM Width: , height: F B H G Sheet steel Enclosure: 1.5 Door:.0 Mounting plate: 3.0 Surface finish: Enclosure and door: Dipcoat-primed, powder-coated on the outside in textured RAL 7035 Mounting plate: Zinc-plated Protection category: IP 55 with selection of the appropriate gland plates, see page 8. Enclosure with two doors, r/h door lockable, may be swapped to opposite side, mounting plate, open base for individual cable entry, see page 8. Detailed drawing, see page 15. Width (B) Packs of Page Height (H) Depth (T) Mounting plate width (F) in Mounting plate height (G) in Model No. CM Doors Base/plinth Components front and rear Height set Height 00 1 set Trim panels (sides) Height set Height 00 1 set Rail for interior installation for height for width Matching in depth ) punched sections with mounting flanges in width ) Support strips for door ) Cable clamp rail Lock systems Standard double-bit insert may be exchanged for lock inserts, see page 11, and folding lever handle, see page 11. 1) in Cat. 31. To order primed enclosures, please add extension.800 to the Model No. Delivery times available on request. Section for cable entry at the rear, suitable for integration into the modular gland plate concept, see page 9. Cable glands of polyamide or brass, Model No. see page 13. Compact System Enclosures Rittal CM 7

8 Compact system enclosures Rittal CM Gland plates Select suitable gland plates depending on the application. The following examples illustrate how individually cable entry may be structured. Potential equalisation is provided via assembly components and earthing points. Design For enclosure width Model No Combination options: One-piece/ Cable gland Two-piece/ Cable gland Two-piece/ Cable clamp strip, centre Depth Depth Sheet steel, zinc-plated, passivated Assembly parts. Note: For greater stability and universal cable entry, the base opening is divided in the width for 1000 and 100 wide enclosures. Order example: CM (W/H/D 1000 x 100 x 400 ) On the left, two-piece gland plates with cable clamp strip On the right, one-piece gland plate Two-piece/ Cable clamp strip, rear Divided/ Groets Three-piece/ Groets Three-piece/ Cable gland Three-piece/ Cable clamp strip, centre EMC You will need: 5 sections for cable entry, centre, TS , see Cat. 31, page 965 (Packs of 4) gland plate, depth 75, gland plate, depth 175, gland plate, depth 75, Gland plate, depth 75 Gland plate, depth 75 3 Gland plate, depth Gland plate, sliding 5 Section for cable entry, centre, see Cat. 31, page Cable entry plates and groets, see Cat. 31, page EMC gland plate, see Cat. 31, page Cable glands, see page Section for cable entry, rear, see page 9. 8 Compact System Enclosures Rittal CM

Compact system enclosures Rittal CM Section for cable entry, rear for TS, CM Unlike the section for cable entry, centre, the rear section is mounted directly onto the base opening.

9 Compact system enclosures Rittal CM Section for cable entry, rear for TS, CM Unlike the section for cable entry, centre, the rear section is mounted directly onto the base opening. In this way, when installing the mounting plate in the rearmost position (TS) or with CM, the cable may be routed directly on a cable clamping rail with no large radii. In conjunction with the new cable clamp rail, see page 9, optimum adjustment between the cable entry and mounting plate can be achieved. Extruded aluminium section, seal PU foam, cross-section: 30 x 5 Protection category: IP 55 subject to correct mounting. For enclosure width Packs of Model No. TS set set sets sets set = 1 section for base opening, 1 section for base plate, each with bonded seal. Cover plate To conceal the entire base opening or as a lid with a fitted enclosure rotated through 180. Sheet steel Colour: Textured RAL 7035 Assembly parts. For enclosure Model No. W D CM Detailed drawing, see page Cable clamp rail C section For strain relief with cable entry. The length of the cable clamp rail is tailored to the width of the CM and TS mounting plate. The mounting bracket included with the supply supports three different installation situations on the mounting plate: 1 3 straight, at a distance of 3 from the mounting plate straight, at a distance of 10 from the mounting plate tilted, towards the mounting plate Sheet steel Surface finish: Zinc-plated, passivated Two mounting brackets and assembly screws. For enclosure width Length Model No. CM : Cable clamps for C rails For cable diameter Packs of Model No. DK Compact System Enclosures Rittal CM 9

10 Compact system enclosures Rittal CM Rails for interior installation For mounting on the threaded bolts provided on the enclosure. With TS system punchings on three sides. Sheet steel, zinc-plated, passivated Assembly parts. For enclosure height/width Packs of Model No. SZ Installation accessories Model No. For depth Cat. 31, page 1 TS punched section with mounting flange, 17 x 73 for the outer level TS support strip for the outer level TS punched rail 18 x PS punched rail 3 x 3 with mounting bracket TS For width () Cat. 31, page 4 TS punched section with mounting flange, 17 x 73 for the inner level TS support strip for the inner level PS punched section without mounting flange 3 x 73, with support bracket TS (alternatively with one or two punched rails 3 x 3 ) Partial mounting plates for universal interior installation, see Cat. 31, page 913. Installation: static via TS punched sections with mounting flanges mounted in the depth 1, horizontally hinged via PS punched sections without mounting flanges mounted in the depth 7 and hinge attachment for partial mounting plates, see Cat. 31, page Swing frame, small in 600 and 800 wide enclosures, see Cat. 31, page 993. Installation: via PS punched sections without mounting flanges mounted in the depth Compact System Enclosures Rittal CM

Compact system enclosures Rittal CM Folding lever handle Because the handle does not take up any swing space, due to its folding mechanism, the door surface area may be maximised for installed

11 Compact system enclosures Rittal CM Folding lever handle Because the handle does not take up any swing space, due to its folding mechanism, the door surface area may be maximised for installed equipment. Colour: Enclosure: Sim. to RAL 9005 Handle: Sim. to RAL 9006 Prepared for the installation of: Semi-cylinders with an overall length of 40 or 45 (to DIN 18 54) All lock inserts As well as SZ lock and push-button inserts With security lock insert E1. Only for applications in VW, Audi, SEAT, SkodaAuto. Supplied without key. Other locks available on request. Packs of Model No. CM : Lock inserts, see page 11. SZ lock and push-button inserts, see page 11. Packs of Model No. CM Lock inserts For folding lever handle CM and standard CM lock (in exchange for the standard double-bit lock insert). Design Model No. TS 7 square square triangular triangular triangular Screwdriver Daimler double-bit Fiat Lock and push-button inserts For installation in the folding lever handle CM Design Security lock insert no. 354 E Model No. SZ ) Push-button insert Lock and push-button inserts, lock no. 13; 1) No other lock is possible 1) with keys Hinges, 180 For retrospective conversion of standard doors with 130 hinges. One pack is sufficient for one door i.e. with two-door enclosures, two packs will be required. Assembly parts. Packs of Model No. CM Compact System Enclosures Rittal CM 11

12 Compact system enclosures Rittal CM Base/plinth components front and rear Base/plinth component consisting of one trim panel and two pre-configured corner pieces. In 00 high base/plinth components, one trim panel is divided into two for cable entry. Sheet steel, spray-finished in RAL 70 Cover caps plastic RAL 9005/ set = base/plinth components, 4 cover caps, 4 screws and captive nuts M1 for mounting on the enclosure. For enclosure Model No. TS width 100 high 00 high : Base assembly plate SO , see page 1. Detailed drawing, see Cat. 31, page 836. German patent no Base/plinth trim, side For mounting between the base/plinth components. At 00 height, two 100 base/plinth trims may be used. Sheet steel, spray-finished in RAL 70 1 set = base/plinth trim panels, including parts for attaching to the base/plinth components. For enclosure Model No. TS depth 100 high 00 high : Fastening bolts for base/plinth trim, see page 1. Detailed drawing, see Cat. 31, page 836. Base assembly plate for base/plinth For fastening the plinth to the floor without moving the enclosure or the bayed enclosure suite. For assembly screws up to 1 Ø. Sheet steel, zinc-plated, passivated Packs of Model No. SO Fastening bolts for base/plinth For mounting on base/plinth trim panels, side. The lockable assembly bolt allows the installation of cable clamp rails and standard C rails. Hexagon steel, zinc-plated, passivated, 19 across flats : Cable clamp rail, see Cat. 31, page 979. For base/plinth trim panel Packs of Model No. SZ height ) 167 1) 1) only for height 00 1 Compact System Enclosures Rittal CM

13 Compact system enclosures Rittal CM Cable gland, brass Nickel-plated brass, neoprene seal Protection category: IP 68 (5 bar, 30 min.) to EN 60 59/10.91 Approval: VDE tested to EN 50 6 Size Cable diameter Packs of Model No. SZ M1 x M16 x M0 x M5 x M3 x M40 x M50 x M63 x Cable gland, polyamide Polyamide 6, neoprene seal Colour: RAL 7035 Protection category: IP 68 (5 bar, 30 min.) to EN 60 59/10.91 Approval: VDE tested to EN 50 6 Size Cable diameter Packs of Model No. SZ M1 x M16 x M0 x M5 x M3 x M40 x M50 x M63 x Wall mounting bracket Assembly parts for mounting on the enclosure. Material Sheet steel zinc-plated, passivated Wall distance ) without assembly parts. Packs of Model No. SZ ) ) A Ø Cable conduit and cable conduit holder For secure cable routing e.g. from the enclosure or mounting plate to the door. Option of attaching the cable conduit holder tailored to system punchings TS and to 48.6 (19 ) pitch pattern with no drilling required. Attachment facility for standard coercially available cable ties is provided on the cable conduit holder, so that cables may be attached upon entry to/exit from the cable conduit. Cable conduit: Polythene Cable conduit holder: Polyamide Cable conduit holder: German patent no European patent no with validity for DE, ES, FR, GB, IT US patent no. 4,779,88 Cable conduit Internal Ø Packs of Model No. SZ 16 5 m m m m Cable conduit holder For cable conduit Ø Packs of Model No. SZ Compact System Enclosures Rittal CM 13

14 Compact system enclosures Rittal CM Utility lectern When required for servicing, it folds down quickly with a maximum support area, and after use is stowed away in a space-saving design. Load capacity: max. 30 kg. Sheet steel Colour: RAL 7035 Support area Width Depth For door width Model No. TS Dust guard trim To protect against deposits on the upper edge of the door and between the enclosure and the door/ lid. Cut the door protection strip to length according to the enclosure width. Drill the enclosure and mount the strip using the adhesive strips and screws. Plastic, UV-resistant Colour: Similar to RAL 704 Length Model No. SZ Eyebolts For crane transportation of enclosures, with reinforcement plate to be inserted underneath. Thread: M1 Eyebolts, reinforcement plates. Packs of Model No. SZ Other system accessories can be found in Catalogue 31, such as Viewing panels/operating panels from page 877 Wiring plan pockets from page 897 System lights from page 954 Earthing from page 960 Signal pillars from page 1041 Cable ducts page 978 Cable glands from page 973 Power distribution components from page 99 System climate control from page Compact System Enclosures Rittal CM

15 Compact system enclosures Rittal CM Technical details Compact system enclosures Rittal CM From page 6/7 CM CM B B / B 50 B H 41 H 50 H 45 H 135 H H 41 H / T / / / / /793 1 Not with H = / / / / / / / / / Model No. CM W (B) H D (T) Trim panel From page 9 B T M8 x 30 1 M6 x 1 only with enclosure width 600, 800 M6 x 1 only with enclosure width 1000, 100 Compact System Enclosures Rittal CM 15

16 All in all solutions from Rittal Industrial Enclosures Small enclosures Compact enclosures Large enclosures Products for the human/machine interface Console systems sheet steel, stainless steel, aluminium and plastic Industrial network technology Input and signalling devices Solutions for EMC and Ex Cable glands Power distribution Electronic packaging System climate control IT solutions Counication systems Rittal has one of the largest ranges of enclosures available for iediate delivery. However, Rittal also supplies integrated solutions up to Level 4. This comprises mechanical installation, power supply, electronic components, climate control and central monitoring. For all of your requirements. Fully assembled and functional. Wherever in the world you develop and implement solutions for yourself and your customers, we are close at hand. The global alliance between production, distribution and service guarantees closeness to the customer. Worldwide! 07/05 E153 Rittal GmbH & Co. KG P.O. Box 166 D-3576 Herborn Telephone: +49(0) Telefax: +49(0) R Switch to perfection

Rittal console systems...

Rittal console systems...... multi-variable Universal console Optionally with short or tall door. Short door offers free field for mounting desk section (see photograph) or keyboard drawer. High level