Pixus Technologies Catalog

Transcription

1 The Power of Embedded Ingenuity Pixus Technologies Catalog Kaparel, Ripac, & Vario Brand Products US: CAN:

2 Individual Subrack Components Side Panels And Flanges Side Panels For Vario, Vario EMC, Compact And Vario Mobil System Attachment holes and anti-twist half shears on a mm pitch pattern. 2.5 mm aluminum Mounting flanges,see page 169 Rear flange,see page 170 D (T) a Packs Height (U) Order No. mm mm of 3 4 (3 + 1) 4 (3 + 2 x 1/2) 6 7 (6 + 1) 7 (6 + 2 x 1/2) fl 2 3U 4U (3U + 1U) 4U (3U + 2 x 1/2U) T a fl fl 2 fl 4.1 T a T a fl 2 fl 4.1 6U 7U (6U + 1U) 7U (6U + 2 x 1/2U) fl 2 74 T a fl fl 4.1 T a fl fl 4.1 T a 12.5 fl U U 11U T a T a T a fl 2 fl fl 2 fl fl 2 fl

3 Individual Subrack Components Side Panels And Flanges mm (19") Mounting Flange 5 For all Ripac Vario subracks. 1 mounting flange EMC gaskets, vertical, see pages 171,179 U Packs Order No. Order No. of With Without Handle Holes Handle Holes mm (19") Front Flange With T Channel To fit all Ripac Vario, Ripac Vario EMC, Ripac Compact and Ripac Vario Mobil subracks. The T-slot can be used for the attachment of components, for strain relief or for cable routing. EMC gaskets may be fitted for EMC applications. section U Packs Order No. of front flange EMC gaskets, vertical, see pages 171, mm (19") Mounting Flange, Recessed 2.5 To fit all Ripac Vario, Ripac Vario EMC, Ripac Compact and Ripac Vario Mobil subracks. For recessed mounting in the enclosure. 1 mounting flange U Packs Order No. of Note: Assembly screws, nuts and washers should be ordered separately. Packs of Order No. 4 set EMC gaskets, vertical, see page

4 Individual Subrack Components Side Panels And Flanges Side Panels For ECO System Attachment holes for 160 / 220 mm PCB installation. Continuous pitch pattern of holes top and bottom for cover attachment. 2.5 mm aluminum clear chromate 1 side panel D (T) Packs of Max. board Height (U) Order No. mm depth mm 3U 6U U 6U T1 a 12.5 T1 a Top view of side plate ø ø " flange 18 Handles For Subracks The handles are mounted on the flanges via handle holes. Die-cast aluminum Painted, silver-gray U handles, assembly parts Rear Flange 5 To fit all subrack versions. Guarantees an 84HP trim on the rear of the subrack. Integral profile to accommodate EMC gaskets. 1 trim EMC gaskets, vertical, see pages 171,179 For all subracks Ripac Vario, Ripac Vario EMC, Ripac Compact and Ripac Vario Mobil U Order No. Packs of 1 Order No. Packs of ø " flange ø

5 Individual Subrack Components Side Panels And Flanges Rear Flange With T Channel To fit all subrack versions. Guarantees an 84HP trim on the rear of the subrack. Additional T channels e.g. for cable routing, attachment of components or strain relief. EMC gaskets may be fitted for EMC applications. U trim EMC gaskets, vertical, see pages 171, EMC Gaskets, Vertical To guarantee EMC protection between subrack sides and front and rear panels. There is a choice of two versions: Version 1: Segmented Version 2: One-piece For mounting on: mm (19") flanges Rear trim EMC contact strip U-shaped front panels Trims for Ripac Vario-Module Mounting flanges for Ripac Vario-Module Stainless steel Version 1 Segmented U Order No. Order No. Packs of 1 Packs of Version 2 One Piece U Order No. Packs of EMC Contact Strip To guarantee EMC protection when horizontal rails (PCB s) are set back. Integral groove to accommodate vertical EMC gaskets. 2 strips are required per subrack. 1 contact strip U Note: Assembly screws should be ordered separately. M3 x Also Required: EMC gaskets, vertical, see above 171

6 Individual Subrack Components Horizontal Rails Ripac Extrusion System: Complete, Simple And Well-Organized Main extrusions A Front horizontal rail B Front horizontal rail with mm extension for extractor handle type IV or VII B1 Double front horizontal rail with mm extension C1 Rear horizontal rail C3 Rear horizontal rail with integral Z rail C4 Rear horizontal rail for Ripac ECO C5 Rear horizontal rail with integral Z rail for Ripac ECO D1 Rear horizontal rail, center D2 Rear horizontal rail, center, with integral Z rail Additional extrusions E Rear adapter rail, center, to accommodate plastic guide rails F Z rail for connectors G Insulating strip* H Conductive strip* I Threaded insert J Identification strip K EMC gasket, horizontal * For conductive or insulated attachment of backplanes All system requirements are covered by just a few basic horizontal rail types. This is a well-organized, cost-effective range to fit all subrack systems and the instrument case/ rackmounted enclosure range Ripac Vario-Module. 172

7 Individual Subrack Components Horizontal Rails Front Horizontal Rail (A) For accommodation of guide rails and securing of front panels. HP pitch pattern of holes for exact mounting of guide rails M 4 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length 2) Flash anodized Note: Order assembly screws separately. M4 x Usable 4 (left) (right) (left) (right) ) ) 1) Including 4 assembly screws 1.2 EMC gaskets, see page Front Horizontal Rail (B) With mm Extension For Type IV And VII Injector/Extractor Handle For accommodation of guide rails and securing of front panels. Front projection and hole pattern based on IEEE 11. when using type IV and VII injectors/extractors HP pitch pattern of holes for exact mounting of guide rails M 4 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length Usable ) ) 1) Including 4 assembly screws Note: Order assembly screws separately. M4 x ) Flash anodized EMC gaskets, see page

8 Individual Subrack Components Double Horizontal Rails Under B1 there are 3 Versions available: Version 1 for Dual PCB sizes (2 x 3U or 3U and 6U) above each other or mixed PCB sizes (2 x 3U next to 6U or 6U + 3U next to 9U) Version 2 for maximum load carrying in a minimum overall system height or for the horizontal mounting of PCBs in a Pizza Box Version 3 for max load carrying in combinations with other standard front horizontal rails (see above) Double horizontal rails are designed for: Improved load carrying (48 kg [8.8 lbs] per PCB at 4HP Improved connector force encounter (over 00N [225 lbf] per slot) Anti twist Injector/Extractor Handle interface 9U applications Max airflow design (max gap between front/rear rail) EMC improvement (no gap between 2 rails) Dual or mixed PCB size applications (2 x 3U in 6U, etc) Double Front Horizontal Rail, With mm Extension (B1)-Version 1 For the attachment of Guide Rails on both sides. One side with mm extension One side without mm extension Material/ EMC gaskets, see page 177 Usable Note: Order assembly screws separately. M4 x Double Front Horizontal Rail, With mm Extension (B1)-Version 2 For the attachment of Guide Rails on one side only. One side with mm extension One side without mm extension Material/ EMC gaskets, see page 177 Usable Note: Order assembly screws separately. M4 x Double Front Horizontal Rail, With mm Extension (B1)-Version 3 For the attachment of guide rails on one side only. Material/Surface: EMC gaskets, see page 177 Usable Note: Order assembly screws separately. M4 x

9 Individual Subrack Components Horizontal Rails Rear Horizontal Rail (C1) For accommodation of guide rails and securing of Z rails, insulating or contact strips. HP pitch pattern of holes for precise installation of guide rails M 2.5 for fastening the Z rails, insulating or contact strips and backplanes M4 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length Usable ) ) 1) Including 4 assembly screws ) Flash anodized Note: Order assembly screws separately. M4 x Rear Horizontal Rail With Channel For Ripac ECO (C4) To accommodate guide rails and for the attachment of Z rails, insulating strips or contact strips. HP pitch pattern of holes for precise installation of guide rails Channel to slide in cover plates Threaded inserts (PS36846) are additionally required for mounting backplanes/z rails M4 thread at ends Straight-through core hole Not suitable for mounting under cover plates Usable Note: M4 x 12 assembly screws should be ordered separately, see above

10 Individual Subrack Components Horizontal Rails Rear Horizontal Rail With Integral Z Rail (C3) For accommodation of guide rails. Integral Z rail for mounting of DIN connectors. HP pitch pattern of holes for exact mounting of guide rails 84 threaded holes M2.5 for fitting DIN connectors M4 thread at ends Straight-through core hole Usable Note: Order assembly screws separately. M4 x Rear Horizontal Rail, Center (D1) When using 6 U PCBs or modules. Mounting facility for Z rails, insulating or contact strips and backplanes. 84 threaded holes M2.5 M4 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length 2) Flash anodized Usable ) ) 1) including 2 assembly screws Note: Order assembly screws separately. M4 x Rear Adapter Rail, Center (E) 6.15 When dividing 6U into 2 x 3U, the adapter rail fastened to the center horizontal rail accommodates the guide rails. HP pitch pattern of holes for precise installation of guide rails M4 and M2.5 thread at ends Straight-through core hole Horizontal rail 192HP for cutting to length 2) Flash anodized Usable ) ) ) including 2 assembly screws Note: Order assembly screws separately M4 x

11 Individual Subrack Components Horizontal Rails Z Rail For Connectors DIN (F) 3 With 84 x M2.5 thread. Usable Note: Order assembly screws separately M2.5 x Threaded Insert (I) With M 2.5 threaded holes in a 1HP pitch pattern. For pushing into front horizontal rails and rear rails of Ripac ECO, type A and type B. Steel Zinc-plated, passivated Usable EMC Gaskets, Horizontal (K) As horizontal EMC protection. For snapping onto the front horizontal rails. Stainless steel Usable For upper / lower horizontal rail When dividing 6U into 2 x 3U, between two horizontal rails Identification Strips (J) For identifying the installation positions on the subrack, self-adhesive. The following versions are available: 4 mm wide: For front rails, horizontal rails 4 mm wide: For rear horizontal rails 2 mm wide: For front horizontal rails (groove) Width Packs of Labeling Order No. 4 mm * 4 mm mm * 2 mm * * Extended delivery times 177

12 Individual Subrack Components Horizontal Rails Contact Strip (H) For conductive mounting of backplanes. Length 8HP Slides onto the rear horizontal rail Aluminum Usable Insulating Strip (G) For insulated mounting of backplanes. Length 21HP Snaps onto the rear horizontal rail Plastic, self-extinguishing to UL 94-V0 Usable Rear horizontal rail equipped with insulating strip (top) and contact strip (bottom) Perforated Strip Aluminum Usable EMC Gaskets, Horizontal For horizontal EMC protection. Snap onto the front horizontal rails. Stainless steel Usable For upper/lower horizontal rail When dividing 6U into 2 x 3U, between two horizontal rails

13 Accessories n Components For EMC Assembly EMC Gaskets, Vertical To guarantee EMC protection between subrack sides and front and rear panels. There is a choice of two versions: Version 1: Segmented Version 2: One-piece For mounting on: mm (19") flanges Rear trim EMC contact strip U-shaped front panels Trims for Ripac Vario-Module Mounting flanges for Ripac Vario-Module Stainless steel Version 1 Segmented U Order No. Order No. Packs of 1 Packs of Version 2 One Piece U Order No. Packs of EMC Gaskets For Cover Plates For EMC shielding between the horizontal rails and covers. Stainless steel HP EMC Contact Strip To guarantee EMC protection when horizontal rails are set back. Integral groove to accommodate vertical EMC gaskets. 2 strips are required per subrack. 1 contact strip U Note: Assembly screws should be ordered separately. M3 x Also Required: EMC gaskets, vertical, see above 179

14 Accessories Vertical Divider Kits n Divider Kit A A B For combined installation of Euroboards and double Euroboards in 6U and 9U subracks. Aluminum 2 front horizontal rails 1 adapter rail 2 threaded inserts 1 vertical support (from 12HP) Assembly parts Front panels, see below EMC gaskets, see pages U (2 x 3U) HP (B) HP (A) Order No. 6U 2 x 3U U (1 x 6U + 1 x 3U) HP (B) HP (A) Order No. 9U 1 x 6/1 x 3U Divider Kit Incl. Guide Rails B A A For combined installation of Euroboards and double Euroboards in 6U subracks. 2 front horizontal rails 1 adapter rail 2 threaded inserts 1 vertical support (from 12HP) 2 guide rails per slot Assembly parts Front panels, see below EMC gaskets, see pages U (2 x 3U) HP HP Number Order No. Order No.* (B) (A) of slots for extrator 3U handles *Front horizontal rail with mm extension See page 172 for details. Divider Kit, Recessed For set back installation of 6U PCBs in 9U subracks of more than 160 mm PCB depth. 2 front horizontal rails 1 divider panel 2 threaded inserts 2 guide rails per slot Assembly parts EMC gaskets, see pages U (6U Recessed) HP HP Number Order No. Order No.* (B) (A) of slots for extractor 3U handles *Front horizontal rail with mm extension See page 172 for details. Front Panel front panel To conceal the vertical rails of the divider kit; must be ordered in addition to the divider kit for Euroboards/double Euroboards. Aluminum 1 front panel 1 vertical EMC gasket (for EMC) Assembly part U HP EMC Version U HP

15 Accessories Vertical Divider Kits/Horizontal Mounting Kits Vertical Support Required for combined installation of single, double and triple Euroboards in one subrack. U Horizontal Mounting Kit For horizontal installation of 6U/9U PCBs in 3U/4U subracks. Horizontal installation space: 3U subrack: 20HP (5 slots) 4U subrack: 28HP (7 slots) Vertical installation space: (for double Euroboards only) 31HP (without trim frame) 28HP (with trim frame) Aluminum, clear chromated 2 front horizontal rails 2 rear horizontal rails.5 rear horizontal rails, center 2 threaded inserts 4/6 insulating strips 4 connecting parts Assembly parts 3U 4U Order No. Order No. 6U horizontal U horizontal U 4U Order No. Order No. 6U horizontal U horizontal Trim Frame For Horizontal Mounting Kit To cover the front rails of the horizontal mounting kit. Aluminum Anodized 1 trim frame U HP For 3U For 4U horizontal subracks subracks Order No. Order No Trim Frame For Horizontal Mounting Kit, Vented To cover the front rails of the horizontal mounting kit. Ventilation holes prevent hot spots from developing on the printed circuit boards. Aluminum Anodized, clear chromated (EMC version) 1 trim frame EMC accessories (for EMC version) U HP For 3U For 4U horizontal subracks subracks Order No. Order No Note: Captive screws and plastic collars should be ordered separately. EMC Trim Frame: U HP For 3U For 4U horizontal subracks subracks Order No. Order No Note: Alignment screws should be ordered separately. Order No (slotted), packs of 0 181

16 Subrack Accessories Guide Rails Guide Rails (Plastic) For 160, 220 and 280 mm PCBs up to a nominal thickness of 2 mm. 2 versions are available: for snap-in and screw fastening for snap-in fastening (see photo) Fiberglass-reinforced polycarbonate (UL 94 V-1), RAL 7032 PCB Packs Order No. Order No. depth of snap-in/screw snap-in fastening* fastening 160 mm mm mm *Note: Order assembly screws separately. Packs of Order No Guide Rails (Plastic) For ESD Clip Installation For 160, 220 and 280 mm PCBs up to a nominal thickness of 2 mm. By installing ESD clips, an electrical connection can be made between the PCB and the subrack assembly. Fiberglass-reinforced polycarbonate (UL 94 V-1), RAL 7032 ESD clips, see below PCB Packs Order No. depth of 160 mm mm mm ESD Clips To create an electrical connection between the PCB and subrack, or to discharge static charges of the PCB. May be installed in guide rails for ESD clips installation and end pieces for guide rails. Packs of Order No Guide Rails (Aluminum) For extreme mechanical loads. Suitable for nominal PCB thicknesses of 1.6 mm. A distinction is made between guide rails with and without end pieces. Guide rails without end pieces are screwed directly onto the horizontal rail. Aluminum PCB Packs Order No. Order No. depth of without* for end pieces endpieces 160 mm mm mm meter Note: Order assembly material separately. Screw M2.5 x Nut M Retaining cage M End Pieces For Guide Rails (Aluminum) Metal ESD clips, Order No may be fitted in order to discharge static charges. Fiberglass-reinforced polycarbonate, UL 94-V1 ESD clips, see above End piece, front End piece, rear ESD clips

17 Subrack Accessories n Guide Rails Guide Rails (Plastic), Keyable Guide rails 4HP, keyable, to IEEE 11.. For a nominal thickness of mm Keying areas for the installation of keys (see page 186) Option of installing ESD clips to discharge static charges (see page 185) Narrow design for maximum air flow Various color variants for distinction between the slots: red for CPU, green for power supply, yellow and gray for board type plug-in units slot identification. Only for use in conjunction with injector/extractor handles, types IV and VII (see page 98). Polycarbonate, basic material to UL 94-V0 Keys, see page 186 ESD clips, see page 182 ESD clip PCB guide For PCB Packs Gray Red Green Yellow depth of Order No. Order No. Order No. Order No. 160 mm mm mm mm * mm mm * With 1/2HP offset Keys ESD clip for front panel Keyable Guide Rails For I/O Assemblies Guide rails 4HP, keyable, to IEEE 11.. Designed to accommodate a ground contact for assembly of a pluggable earth connection. For a nominal thickness of mm For 75 mm deep PCBs Keying areas for the installation of keys (see page 186) Option of installing ESD clips to discharge static charges (see page 185) Narrow design for maximum air flow For cpci or VME applications Color For PCB Packs Guide Rail Guide Rail depth of top bottom Order No. Order No. Grey 75 mm Yellow 75 mm Only for use in conjunction with injector/extractor handles, types IV and VII (see page 98). Polycarbonate, basic material to UL 94-V0 Keys, see page 186 ESD clips, see page 182 Ground contact, see below Ground Contact Ensures a pluggable ground connection. Only for use with 80 mm guide rails for I/O board type plug-in units. UL recognized for 30A. Die-cast zinc Housing, contact spring Housing + 1 set contact spring Housing + 50 sets contact spring Assembly screw M3.5 x 12 mm 183

18 Accessories Guide Rails n Keyable Guide Rails, With 1/2 HP Offset Guide rails with.5hp offset. Guide part for use in telecommunications applications. This allows PCBs to be populated on both sides. Green guide rails with offset are prescribed in the Compact PCI standard for the installation of power packs (PICMG 2.11) For PCB thickness mm 4HP x 160/220 mm Narrow design for maximum air flow Coding areas for the installation of keys (see page 186) Option of installing ESD clips to discharge static charges (see page 185) Only for use in conjunction with type IV and VII handles Telecom (see page 98). For PCB Packs Color Order No. depth of Gray mm 1 Yellow Green Gray mm 1 Yellow Green Polycarbonate, self-extinguishing to UL94-VO 1 guide rail Keys, see page 186 ESD clips, see page 182 Extractor handles, type IV, VII with offset, see page 98 Keyable Universal Guide Rails (Aluminum), Three-Part Guide rails, keyable, with aluminum center part, for high mechanical loads. Suitable for a nominal thickness of mm. The guide rails comprise the following individual components: 2 end pieces 1 aluminum center part Insulating center part(s) End Pieces For Three-Part Guide Rails For a PCB thickness of mm. Polycarbonate, self-extinguishing to UL94-VO Front end piece Rear end piece Note: When ordering individually, one front and one rear end piece is required for each guide rail. Aluminum Center Part For Three-Part Guide Rails For a PCB thickness of mm. Aluminum For PCB Order No. Order No. depth Packs of 1 Packs of 220 mm mm mm mm Insulating Center Part For Three-Part Guide Rails The insulating center part slides onto the aluminum center part. Length: 60 mm Plastic, self-extinguishing to UL 94-V0 Packs of Order No For PCB depth No. of insulating strips required 160 mm mm mm mm mm 5 184

19 Accessories Guide Rails Air Block Panel For Unused Slots 4HP To conceal unused slots and prevent airflow. Snap-fastens onto keyable guide rails in unused slots. Suitable for all 4HP x 160 mm standard Guide Rails (not offset) Polycarbonate UL 94-V0 Color: Blue For 4HP plastic guide rail 160 mm ESD Clip For keyable guide rails. To discharge static charges. ESD clip for PCB guide (B) For permanent, direct discharge from the PCB before connector contact ESD clip for front panel (A) To discharge static charges in conjunction with an ESD pin (C). Inserted into the end piece of the guide rail Only for use in conjunction with extractor handle with ESD pin (type IV, type VII). Order No. ESD clip ESD clip for for PCB front panel Stainless steel 50 ESD clips ESD Clip PCB guide Keys ESD Clip front panel 185

20 Accessories n Keying n Keys Keys are used for keying plug-type assemblies, and prevent them from being used in incorrect slots. The keys are inserted into the chambers of keyable guide rails and type IV and VII injector/extractor handles. There are 64 different keying options in total for each guide rail. When the upper and lower guide rail are both keyed, this produces a total of 4,096 different combinations. Plastic, self-extinguishing to UL 94-V0 0 keys Keying tool for simple assembly of up to 3 keys Color Gray Red Standards: IEEE 11., IEC , PICMG 2. Position 1 Position 2 Position 3 Position 4 Keying Tool For simple assembly of keys. Up to 3 coding keys may be fitted simultaneously. An integral alignment pin makes positioning easier. Plastic, UL 94-V0 1 keying tool Packs of Order No

21 n Accessories Board Ejector PCB Ejector/Retainer To secure and extract PCBs without a front panel. Fastens to the PCB. The retainer can be used on its own as a PCB retainer. Fiberglass-reinforced polycarbonate (UL 94-V0), RAL 7032 PCB ejector/retainer PCB retainer Order No. PCB ejector/ PCB retainer retainer only Plastic Guide Rails For Box Type Plug-In Units For PCB thickness 1.6 mm. For use in conjunction with slotted cover plates for box type plug-in units. Order No. see page 213. Noryl guide rails For PCB depth 160 mm mm

22 Accessories Covers n Covers Version 1 To fit all Vario System subracks, Vario EMC, Compact and Mobil. To cover the overall subrack depth (EMC application) or to protect connectors. Flat design top and bottom Optionally perforated or solid For mounting on the subrack side panel with the aid of mounting blocks. For EMC applications, additional mounting blocks must be fitted over the entire subrack depth 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated Set 2 covers 8 mounting blocks at 28.5 mm 24 assembly screws Single Unit 1 cover T d1 Single Unit Set HP For side panel Cover depth Order No. Order No. depth T (mm) d1 (mm) Perforated Solid Perforated Solid * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *The following should be ordered separately: Mounting blocks Assembly screws EMC gaskets EMC Gaskets For Covers For EMC shielding between the horizontal rails and covers. Stainless steel HP

23 Accessories Covers Covers Version 2 To fit all subracks Vario System subracks, Vario EMC, Compact and Mobil. To cover the PCB depth. Flat design top and bottom Optionally perforated or solid For mounting on the subrack side panel with the aid of mounting blocks 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated Set 2 covers 8 mounting 28.5 mm 24 assembly screws Single Unit 1 cover d2 d1 Single Unit Set HP For side panel Cover depth Order No. Order No. depth T (mm) d1 (mm) Perforated Solid Perforated Solid * * * * * * * * * * * * * * * * * * *The following should be ordered separately: Mounting blocks Assembly screws Covers Version 3 To fit all Vario System subracks, Vario EMC, and Mobil.To cover the overall subrack depth (EMC application). Cover with 1U fold (no. 1), to conceal the 1U section in the subrack In addition, a flat cover (no. 2) is also required Front optionally perforated or solid Suitable for subracks 4U (3 + 1), 7U (6 + 1), 11U For mounting on the subrack side panel with the aid of mounting blocks. For EMC applications, mounting blocks must be fitted over the entire subrack depth 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated Single Unit 1 cover with 1U fold d3 T Pos. 2 Pos. 1 Single Unit HP For side panel Cover depth Order No. depth T (mm) d1 (mm) Perforated Solid * * * * * * * * * * * * *The following should be ordered separately: Mounting blocks Assembly screws EMC gaskets

24 Accessories Covers n Covers Version 4 To fit all Vario System subracks, Vario EMC, and Vario Mobil. To cover the overall subrack depth. Covers top/bottom with.5u fold to cover the.5u section in the subrack Front optionally perforated or solid Suitable for subracks 4U (3 + 2 x.5) and 7U (6 + 2 x.5) For mounting on the subrack side panel with the aid of mounting blocks For EMC applications, additional mounting blocks must be mounted across the entire depth 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated Single Unit 1 cover with.5u edge fold d3 T Single Unit HP For side panel Cover depth Order No. depth T (mm) d1 (mm) Perforated Solid *The following should be ordered separately: Mounting blocks Assembly screws EMC gaskets Mounting Blocks For mounting covers, versions 1 4, on the subrack side panel. For EMC applications, additional mounting blocks must be fitted across the entire subrack depth. Die-cast Nickel-plated The table shows the number of mounting blocks required to install 1 cover with EMC shielding. Mounting blocks mm long *The following should be ordered separately: Assembly screws M3 x 6 No. of mounting Cover blocks for maximum depth (mm) EMC protection

25 Accessories Covers Covers (Snap Fastening) Version 5 To fit all Vario System subracks, Vario EMC, Compact and Vario Mobil.To cover the overall subrack depth or PCB depth. Simple Assembly: Side folds with half shears facilitates fast assembly (without mounting blocks) by simply snap-fastening Side notches for fitting horizontal rails in 160, 220 or 280 mm depth Optionally perforated or solid 1.0 mm aluminum, hole diameter 4 mm in vented version Untreated 1 cover 2 gaskets Single Unit HP For side panel Cover depth Order No. depth T (mm) d1 (mm) Perforated Solid mm 175/ /220 mm mm 175/ /220 mm mm mm 175/ mm /220 mm /220 mm /220 mm /220/280 mm Covers For Ripac ECO subracks. Covers the entire subrack depth. Optionally perforated or solid Covers are inserted into the horizontal rails and secured at the sides Mounting clips may optionally be used for additional support Sheet steel Zinc-plated 1 cover HP For side panel Order No. depth (mm) Perforated Solid Mounting clips, Order No , packs of 1 Assembly screws, Order No , packs of 1 191