Cabinets PROLINE. Modifications. Overview Cabinets Climate Control Cases Subracks/ 19" chassis Modules...

Size: px

Start display at page:

Download "Cabinets PROLINE. Modifications. Overview Cabinets Climate Control Cases Subracks/ 19" chassis Modules..."

Peter Robinson
5 years ago
Views:

Overview... 0 Cabinets Cabinets... 1 Climate Control... 2 Cases.

IEC 60917-2-1 Internal dimensions correspond to: ETS 300119, Part 2 Protection IP 55

1 Overview... 0 Cabinets Cabinets... 1 Climate Control... 2 Cases... 3 Subracks/ 19" chassis... 4 Modules Systems... 6 Power supply units... 7 Backplanes Grid Assembly ETSI and 19" PC cabinet Accessories... 9 Appendix Standards External and internal dimensions correspond to: IEC 60297, Part 1 and 2 IEC Internal dimensions correspond to: ETS , Part 2 Protection IP 55 IEC Protective earth connections correspond to: EN Modifications Special colours Special sizes Customized solutions Further important information can be found on the Internet under UK 06/2003 For further informationen...

2 Cabinets Overview " Electronic and PC cabinet Industrial cabinet with IP 55 and high stability Welded steel frame with 25 mm grid Internal assembly to ETSI possible Load carrying capacity 600 kg Standard cabinets Standard Cabinets Electronics cabinet with front door Universal cabinet with steel door PC Electronic Cabinet Universal cabinet PC Cabinet Accessories Door retainer Door hinge Document pocket Lifting eye Base/plinth Mobile plinth Adjustable support feet Castors Earthing kit Assembly parts Mounting plate Mounting rails / Support rails Traverses supports " panel/ slide mounts Threaded inserts Identification strips.1.16 Metric panel mounts " cover plate Slide rails " swing frame " shelf Universal shelf Further accessories.1.72 Individual configuration individual configuration ServicePLUS PLA45426 width depth height For further informationen... UK 06/

Cabinets Electronics cabinet with front door Type of protection IP 55 Glazed front door Including 19" panel mounts Finish RAL7035 Delivery through Service plus (assembled) 1 1 Frame, welded, 2.

3 Cabinets Electronics cabinet with front door Type of protection IP 55 Glazed front door Including 19" panel mounts Finish RAL7035 Delivery through Service plus (assembled) 1 1 Frame, welded, 2.5 mm steel, RAL Side panels 3 1 Rear door, steel, incl. lever handle, left hand hinged, door opening angle Glazed front door, safety glass,incl. lever handle, door opening angle Top cover, plain 6 1 Base plate " panel mount, front Illustration shows cabinet ( ) with 2 depth members ( ) Height Height Width Depth Plinth height 100 mm Mobile base/ plinth 2 19" panel mounts 2 depth members U mm mm mm Order No. Order No. Order No. Order No. Order No Assembly kit for 2 depth members /oneclick 1.4

4 Cabinets Universal cabinet with steel door Type of protection IP 55 Steel front door For individual mounting (e.g. with mounting plate, useable as switch gear cabinet Finish RAL 7035 (assembled) 1 1 Frame, welded, 2.5 mm steel, RAL Side panels 3 1 Steel front door, incl. lever handle, door opening angle Rear panel 5 1 Top cover 6 1 Base plate Height Height Width Depth Plinth height 100 mm Mobile base/ plinth 2 19" panel mounts 2 depth members U mm mm mm Order No. Order No. Order No. Order No. Order No Assembly kit for 2 depth members

5 Cabinets PC Type of protection IP 55, also with open keyboard Telescopic keyboard and mouse shelf Finish RAL 7035 (assembled) 1 1 Frame, welded, 2.5 mm steel, RAL Side panels 3 1 Top cover 4 1 Rear door incl. lever handle, door opening angle Glass door at top with safety glass, lockable, door opening Monitor shelf at top, load-carrying capacity 75 kg 7 1 Keyboard chassis 8 1 Steel door at bottom, lockable 9 1 Base/plinth plain, 100 mm high Height H Width B Depth T Order no. mm mm mm Note All parts from and all parts from the cabinet accessories are suitable for the further assembly in the cabinet PLA45727 Cabinet depth Mounting height Width Height Depth mm mm mm mm 600 Monitor ) PC Keyboard chassis Monitor ) PC Keyboard chassis ) 750 mm high with a cabinet height of 1900 mm 1.6

6 Cabinets Door retainer For steel doors Assembly at top or bottom possible No drilling necessary (kit) 1 1 Bracket, steel, zinc-plated 2 1 Guide plate, steel, zinc-plated 3 1 Arm, steel, zinc-plated 4 1 Assembly kit PLA45717 Description Order No. Door retainer Note Not suitable for doors with 180 hinges. Door hinge door hinge, steel, RAL Assembly kit Description Order No. Door hinge PLA

7 Cabinets Document pocket 2 versions: - for mounting in the door frame for files (item 1) - For bonding to any position for A4 documents (item 2) 1 or 2 1 Document pocket 3 1 Assembly kit PLA45723 Item Type For cabinet width Material Order no. mm 1 for door frame mm steel for bonding 600 / 800 PS Note When using 19" panel mounts, it is not possible to install them in the front most position. Lifting eye Thread M12 Application and loading as per DIN 580 Description Qty Order No. Lifting eye PLA

8 Cabinets Base/plinth 100 mm/200 mm For spacing cabinet from floor Removable panels, thus cable entry possible on all sides Support feet can be used Floor mounting possible with corner pieces PLA Cover panels 2a 4 Corner pieces with 100 mm base/plinth height 2b 8 Corner pieces at 200 mm base/plinth height 3 1 Assembly kit Plinth height 100 mm Plinth height 200 mm For cabinet width For cabinet depth Order No. Order No. mm mm W = cabinet width, D = cabinet depth, H = base/plinth height PLA45472 Note Combination with castors is not possible. Mobile plinth For cabinet depth 600 mm and 800 mm Load-carrying capacity: 375 kg Open at bottom (kit) 1 1 Base/plinth, die-cast aluminium, RAL Castors, PA 3 2 Rubber mats, natural rubber, black, self-adhesive 4 1 Assembly kit For cabinet width Depth t Order No. mm mm mm PLA

9 Cabinets Adjustable support feet For levelling on uneven floors Load-carrying capacity 125 kg per foot For mounting on cabinet or on standard plinth Type Qty Order no. Support feet, steel, polyamide, black ) with plinth = 1 to 12 mm without plinth = 24 to 36 mm PLA45310 Castors Load-carrying capacity: 100 kg per castor Recommended load: max. 300 kg per cabinet (kit) 1 2 Castors locking, PS/steel 2 2 Castors non-locking, PA/steel 3 1 Assembly kit Description Order No. Castors TRA

10 Cabinets Earthing kit Enables IEC-compliant earthing Wires 310 mm long 2 1 Assembly kit Description Order no. Earthing kit Earthing kit 1 wire, 310 mm long, including assembly parts Earthing kit for 1 telescopic shelf AZA43284 Rectangular cage nuts for Zubehör For mounting of panel mounts, mounting rails, swing frame and other accessories on the frame Can be clipped in from the front into the grid holes of the frame and mounting rails Thread M6 Type Qty Order No. Rectangular cage nuts without GND/earthing Rectangular cage nuts with GND/earthing PLA45314 Assembly parts Zubehör Assembly kit for installation of 19" components Item Type Qty Order No. 1 Pan head screw M Cage nut M Plastic washer, black SC

11 Cabinets Mounting plate For mounting electrical components and modules incl. wiring With slide and stop blocks for energy-saving installation and removal Load-carrying capacity 500 kg 1 1 Mounting plate, 3 mm steel, zinc-plated 2 1 Assembly kit Item 3: mounting position furthest to rear Item 4: 25 mm forward mounting PLA45313 For cabinet height H h For cabinet width B b Order no. mm mm mm mm mm mm Additional mounting angle for mounting plate with heavy components, incl. assembly kit, 2 pieces Note For heavy installed components with forward mounting position, additional mounting rails are required for installation Additional mounting angle for mounting plate PLA

12 Cabinets Mounting rails with 1 row of holes For setting up mounting plane in any position 1 4 Mounting rail with 1 row of holes, 2 mm steel, zincplated PLA45479 For cabinet height For cabinet width For cabinet depth L X Order no. mm mm mm mm mm Assembly kit for mounting rails (cabinet depth, cabinet width), 1 kit Assembly kit for mounting rails for cabinet height, 1 kit Mounting rails with 3 rows of holes For setting up mounting plane in any position 1 2 Mounting rail with 1 row of holes, 2 mm steel, zincplated PLA45478 For cabinet height For cabinet width For cabinet depth L X Order No. mm mm mm mm mm Assembly kit for 2 depth members for mounting rails (cabinet depth, cabinet width), 1 set Assembly kit for mounting rails for cabinet height, 1 kit T = cabinet depth PLA

13 Cabinets Support rails Support rails enable installation of heavy components (e.g. transformers) in the base area. The rails are bolted to the frame, already installed base plates do not obstruct. Installation in the cabinet width. PLA Support rails, steel, zinc-plated 2 4 Slide nuts with M10 bolts, for mounting installed components 3 1 Assembly kit For cabinet width L Order no. mm mm PLA " panel/slide mounts For mounting chassis, subracks, distribution and blank panels Mounting directly on the frame or on depth member As per IEC " panel/slide mount, 2 mm steel, see table 2 1 Assembly kit, incl. earthing PLA45434 For cabinet height Usable height Length AlZn RAL 7035 light grey mm U mm Order no. Order no. Partial-height mounting Partial-height mounting Partial-height mounting Partial-height mounting Partial-height mounting Cage nut M6 Zinc-plated steel, 100 pieces

14 Cabinets 19" panel mounts with T-groove (465 mm) For insertion of slide nuts For infinitely variable height adjustment of installation components " panel mount, aluminium 2 1 Assembly kit, incl. earthing For cabinet height Usable height Length Order no. mm U mm Partial-height mounting Partial-height mounting Partial-height mounting Partial-height mounting Slide nut M6, nickel-plated, 100 pieces For installation of 19" panel mounts with T-groove, at least 2 sets of depth members are required, see page 1.13 biz/oneclick 1.15

15 Cabinets Threaded inserts for 19" panel mounts with T-groove Threaded inserts are inserted into the T-groove. This produces a defined U/SU grid Slide nuts become superfluous, height adjustment is not necessary. Subsequent installation is possible 2 versions: -19 with EIA perforation -mep with metric perforation (25 mm grid) 1 2 Threaded insert, 3 mm steel, zinc-plated, thread M6 PLA " threaded insert (EIA) mep threaded insert Usable height Order no. Usable height Order no. U SU U height identification strips for 19" panel mounts with T-groove For sliding into panel mounts The measurement units are given in U and millimetres Subsequent installation is possible 1 2 U height identification strip, PS 0.3 mm, white PLA45583 U height identification strips 19" mep U height identification strips Height Height Order No. Order No. U mm Note U height identification strips are easy to shorten 1.16

16 Cabinets Metric panel mounts (515 mm) Metric components As per IEC Metric panel mounts, bolt-on dimension 515 mm, 2 mm steel, RAL Assembly kit, incl. earthing For cabinet height Usable height Length Order no. mm SU mm Partial-height mounting Partial-height mounting For installation of metric mounts, at least 2 sets of depth members are required, see page " cover plate For 600 mm wide cabinets with 19" mounting Upper and lower ends of 19" panel mounts. Inserting the 19" cover plates closes the gap between 19" components" and the frame " cover plates, aluminium profile 2 1 Assembly kit Description Order no. 19" cover plate PLA

17 Cabinets Slide rails For safe and simple installation of heavy 19" subracks. The rails are suspended in 19" panel mounts Can be attached in 1 U increments Load-carrying capacity max. 25 kg per pair 1 10 Slide rail for attaching, 1.5 mm steel, AlZn finish 2 1 Assembly kit L = length PLA45437 For cabinet depth Length Usable depth Qty Order no. mm mm mm useable depth corresponds the distance of the 19"-panel/slide mounts Short slide rail Support for heavy 19" subracks For attachment in the 19" profiles Load-carrying capacity max. 15 kg per pair 1 10 Slide rail, 1.5 mm steel, AlZn finish 2 1 Assembly kit ERA46348 Description Order No. Short slide rail SC

18 Cabinets 19" swing frame For assembly of 19" subracks in 600 mm wide cabinets. The pivot point can be optionally on the right or on the left 2 finishes: Powder-coated in RAL 7035 or zinc-plated Load-carrying capacity 150 kg (kit) " swing frame, 2 mm steel 2 2 Support bars, 3 mm steel 3 2 Square locks 8 mm, Zn/steel, chrome-plated, incl. 2 keys 4 1 Assembly kit Maximum mounting depth for chassis T max. =200 mm h1 = Height h2 = useable Height Swing frame stop SZA44688 For Cabinet height Height Usable height RAL 7035 light grey zinc-plated mm mm U Order no. Order no. Partial-height mounting Partial-height mounting Safety lock for replacement of the square lock, including 2 keys Spare key 1 unit Swing frame stop 120 St, RAL Note Swing frame mounted in front position, requires no further assembly parts Swing frame partial height No further assembly parts required Swing frame recessed: 2 pairs of depth members required (3 row), see page 1.13 TRTP

19 Cabinets Type A Stationary 19" shelf For mounting on four 19" panel/slide mounts or 19" panel mounts with T-groove 2 assembly options - Type A: maximum surface area - Type B: reduce with shelves for cable ducting at sides Load-carrying capacity 75 kg Material: 1.5 mm steel plate, RAL 7035 Type A shortened, deepened installation PLA46577 Type For cabinet depth T Shelf Order no. deepened b t installation mm mm mm mm Type A Type A Type A Type B Type B Type B Type B Mounting bracket required for type B Earthing kit 1 wire, 310 mm long, including assembly parts Shelf support 1 unit Depth member for recessed installation 600 mm cabinet depth Depth member for recessed installation 800 mm cabinet depth Type B PLA46578 If shortened stationary shelves are used, a set of depth members incl. assembly kit must be ordered, see page 1.13 w = shelf width d = shelf depth D = cabinet depth PLA

20 Cabinets 19" telescopic shelf Shelves telescopic, stationary 19" shelf can be assembled on telescopic slide rails For mounting on four 19" panel/slide mounts Load-carrying capacity: 50 kg Recessed installation For cabinet depth For cabinet depth recessed installation Shelf Telescopic slides (2 pieces) w D Order no. Order no. mm mm mm mm Earthing kit for 1 telescopic shelf T-bar lock (on the right or left), 1 unit Shelf support 1 unit Note Shorter shelves can also be mounted on the telescopic slide rail (max. 200 mm shorter) Please order shelf support separately w = shelf width d = shelf depth D = cabinet depth Tabe of dimensions For cabinet depth D mm Extension length d 1 mm

21 Cabinets Universal stationary shelf For mounting on cabinet frame Cabinet dimensions B T mm Surface area b t mm Order no mm mm mm mm Earthing kit 1 wire, 310 mm long, including assembly parts Shelf support for 600 mm wide cabinets, 1 unit PLA46581 Note If depth members or mounting rails are used, shorter shelves can also be used PLA46582 Universal telescopic shelf Cabinets For mounting on cabinet frame Please order telescopic slides separately Cabinet dimensions B T Surface area b t Telescopic slides (2 pieces) mm mm Order No. Order No mm mm mm mm Earthing kit for 1 telescopic shelf T-bar lock (on the right or left), 1 unit Shelf support for 600 mm wide cabinets, 1 unit PLA46583 Note Shorter shelves can also be mounted on the telescopic slides (max. 200 mm shorter) Cable carrier for telescopic shelves see chapter cabinet - accessories 1.22

22 Cabinets ServicePLUS P The special assembly service We assemble to your specifications Environmentally friendly by only one package Please talk to our local sales departement concerning availability and delivery time How to order? After the order no., write the index /05 (e.g /05) and specify the desired installation position. When no position is specified; equipment is mounted in a standard position. further dimensions further accessories technical data PLA45426 /serviceplus 1.23

23 Cabinets Service PLUS P further dimensions further accessories technical data Order information Frame RAL 7035 Side panel RAL 7035 Rear panel RAL 7035 Steel door RAL 7035 Glass door RAL 7035 Cover frame RAL 7035 PLA45442 PLA45443 PLA45444 PLA45446 PLA45445 PLA45708 Qty 1 piece 2 pieces 1 piece 1 piece 1 piece 1 piece Cabinet dimensions Line Height Width Depth No. U mm mm mm

24 Cabinets Service PLUS P further dimensions further accessories technical data Order information Top cover RAL 7035 Top cover raised RAL 7035 Top cover for fan tray RAL 7035 Base plate IP 55 Base plate with filter Base/plinth 100 mm PLA45447 PLA45447 PLA45599 PLA45448 PLA45448 PLA45449 Qty 1 piece 1 piece 1 piece 1 piece 1 piece 1 piece cabinet dimensions Line Height Width Depth No. U mm mm mm

25 Cabinets ServicePLUS P further dimensions further accessories technical data Order information Ventilated base/plinth 100 mm Mounting plate zinc-plated 19"-Panel mount RAL ) Panel/slide mount metric 515 1) Depth member 2) Reducing depth member PLA45449 PLA45453 PLA45451 PLA Qty 1 piece 1 piece 2 pieces 2 pieces 2 pieces 2 pieces Cabinet dimensions Line Height Width Depth No. U mm mm mm ) cabinet width 800 mm reduced depth member necessary 2) Assembly kit necessary 1.26

26 Cabinets ServicePLUS P further dimensions further accessories technical data Order information 19"-Shelf stationary 3) 19"-Shelf telescopic 3) Telescopic Slide Universal-Shelf stationary Universal-Shelf telescopic Telescopic Slide Qty 1 piece 1 piece 2 pieces 1 piece 1 piece 2 pieces Cabinet dimensions Line Height Width Depth No. U mm mm mm ) at 19"-Bracket on the Frame Further accessories P Order information Description Qty Order no. Door hinge Lever handle Lifting eye Adjustable support feet Earthing kit (cabinet) Earthing kit (shelf stationary) Earthing kit (shelf telescopic) T-bar lock

Cabinets 19" lab racks

Cabinets 19 lab racks Overview... 0 Cabinets... 1 19" lab racks Cabinets 19" lab racks Wall mounted cases... 2 Accessories for cabinets and wall mounted cases... 3 Climate control... 4 Desk-top cases... 5 Subracks/ 19" chassis...