Product Overview. Harnessflex TempGuard system High temperature wiring harnesses

Transcription

1 Product Overview Harnessflex TempGuard system High temperature wiring harnesses

2 Harnessflex TempGuard system High temperature wiring harnesses The NW TempGuard range from Harnessflex has been designed to satisfy the market demand for a complete wiring harness protection solution, which can handle long term exposure to high temperatures. We offer advice on any specific application, the technical team at cmg.conduitsystems@tnb.com s a leading designer and manufacturer of flexible conduit systems, fittings and connector interfaces, Harnessflex is well known for providing automotive manufacturers across the globe, with solutions that protect vehicle wiring against damage from mechanical abrasion, liquid and dust ingress, and corrosive salts. Our NW TempGuard system has been designed to meet the increasing demands of today s engines. GR systems that recycle an engine s waste gases, the use of single or multiple turbos to improve tractability, power and fuel efficiency have all contributed to higher temperature areas within a vehicle s engine. The TempGuard conduit and fittings system is designed to work specifically with high temperature wiring, allowing them to successfully operate at up to 200º, with long term heat aging, tensile and impact strength testing carried out to ensure the reliability and validity of the range. Through improved system performance and integrity TempGuard reduces running costs, mimimises breakdowns and downtime, increasing overall productivity. Features & benefits High temperature range of (up to 200º) for conduit and fittings - offering greater protection for wiring Very high flexibility & fatigue life, with protection from heat, abrasion, vibration and automotive fluids in all harness routing areas High temperature Polyamide fittings High temperature o-polyester conduit UL94 V2 certified fittings Products tested for tensile and impact strength Harnessflex TempGuard allows increased usage of components at higher engine temperatures, due to: Turbo use Increased engine efficiency Reduced noise pplications The TempGuard launch range includes: HT08 to HT20 conduit T & Y-Piece fittings Straight & elbow fittings onnector Interfaces: MP Junior and Mini Timer MP Superseal mpseal 16 connectors osch connectors eutsch connectors FI pex 2.8 connectors 2 Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 3

3 Harnessflex TempGuard system Solving automotive routing temperature issues Harnessflex TempGuard system High temperature harness - Sample mpseal 16 onnector Interface MP S Superseal onnector Interface pprovals Mark to the Low Voltage irective RoHS ompliant to 2011/65/U onforms with nd of Life Vehicle directive (LV) U200/53/ FI utomotive onnector Interface Type TPH - xternal Hinged T-piece esigned to operate at temperatures up to 200, TempGuard systems provide a complete high temperature solution for the automotive market. Modern engine design has continually evolved to meet changing times. Global regulations such as uro 6, US10, and Tier 4 for off-highway heavy duty vehicles have mandated that manufacturers reduce emission levels. This required reduction, along with changes to engine design to improve safety, reduce noise and improve efficiency, have resulted in higher engine temperatures and led to the automotive industry actively looking for a complete and effective solution to protect the wiring and connectors in their engines. Harnessflex have responded to market demand, by creating it s new range of high temperature conduits and fittings, designed to operate at temperatures up to 200. reated from the outset for use as a full system, the range is made from specialist co-polyester and polyamide respectively, that provide long-term heat, age, tensile, and impact strength to protect vital cable connections. The system has endured long term heat age testing to ensure consistent performance. The TempGuard system is manufactured from low smoke, zero halogen materials, with a temperature operating range suited to the heat demands of today s engines. The system provides higher performance levels of flexibility, impact and abrasion resistance, combined with enhanced chemical resistances especially to oils and greases for aggressive engine compartment environments. The range includes HT08 - HT20 conduit, with respective T and Y-Piece fittings, straight and elbow joiners, along with connectors for MP, osch, eutsch and FI. working high temperature sample harness is available for order and global shipping (see the sample harness opposite). Type YPH - xternal Hinged Y-piece eutsch T Series onnector Interface HT Standard Weight High Temperature Flexible onduit 4 Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 5

4 Harnessflex TempGuard system Range overview Type Type JPH - xternal Type PH - xternal Type TPH - xternal Type YPH - xternal Two-piece X MP S Superseal MP Junior & mpseal 16 osch ompact eutsch - T Series FI utomotive pex HT Standard Weight Hinged Joiner Hinged lbow Hinged T-Piece Hinged Y-Piece onfiguration fitting Swivel Interface Mini Timer onnector Interface onnector Interface onnector Interface onnector Interface High Temperature onduit onnector Interface Part number JPH PH TPH YPH XPH IH-S IH-M IH-T IH- IH-T IH-F HT escription One-piece joiner hinged One-piece elbow joiner One-piece symmetrical One-piece symmetrical Two-piece X configuration Single junction straight and Single junction straight range of straight Single junction straight Single junction straight Straight and 90 elbow HT onduit suited to static fittings allow a variety of hinged fittings allow a 3 junction fittings allow a 3 junction fittings allow a fitting. These fittings aren for90º elbow interfaces and 90º elbow interfaces and 90º elbow fittings and 90º elbow interfaces and 90 elbow fittings fittings offering a compact applications where elevated conduit size variations. variety of conduit size variety of conduit size variety of conduit size designed to snap together providing high integrity providing high integrity offering a compact and providing high integrity providing high integrity and high integrity connection temperatures are present. These fittings are designed variations. These fittings variations. These fittings variations. These fittings together over all types connections between connections between high integrity connection connections between connections between between FI pex automotive High compression strength to snap together over are designed to snap are designed to snap are designed to snap of slit and unslit conduit, S - MP Superseal MP Superseal or Junior between mpseal osch ompact connectors eutsch T connectors connectors or junior timer and excellent chemical resistance. all types of slit or unslit together over all types of together over all together over all types maintaining maximum connectors and Harnessflex Timer connectors and automotive connectors and Harnessflex conduit and Harnessflex conduit connectors and Harnessflex conduit, maintaining slit or unslit conduit, types of Harnessflex of slit and unslit conduit, conduit bore. conduit systems. Harnessflex conduit systems and Harnessflex conduit systems. In addition, systems. In addition, conduit systems. These maximum conduit bore. maintaining maximum conduits in extreme maintaining maximum all types of slit and unslit In addition, 90º elbow In addition, 90º elbow systems. These interfaces 90º elbow versions allow 90º elbow versions interfaces provide complete an be used as a reducer conduit bore. an be temperature applications. conduit bore. versions allow the conduit versions allow the conduit provide complete cable the conduit to swivel allow the conduit to protection right up to as well as an enlarger. used as a reducer as well to swivel 360º around the to swivel 360º around the protection right up to 360º around the swivel 360º around the the connector. as an enlarger. connector housing. connector housing. the connector. connector housing. connector housing. Material Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) Polyamide (Nylon) o-polyester For use with HT standard HT standard HT standard HT standard HT standard HT standard HT standard HT standard HT standard HT standard HT standard Harnessflex High weight conduit weight conduit weight conduit weight conduit weight conduit weight conduit weight conduit weight conduit weight conduit weight conduit weight conduit Temperature Hinged Fittings olour Orange lack IP Rating (with appropriate fitting) IP40 haracteristics Temperature Range Minimum -40º -40º -40º -40º -40º -40º -40º -40º -40º -40º -40º -45 Permanent max. +160º +160º +160º +160º +160º +160º +160º +160º +160º +160º +160º +150 Long term max. (30,000 hrs) +185º +185º +185º +185º +185º +185º +185º +185º +185º +185º +185º +175 Short term max. (3000 hrs) +200º +200º +200º +200º +200º +200º +200º +200º +200º +200º +200º +190 Mechanical protection Medium Medium Medium Medium Medium Medium Medium Medium Medium Medium Medium Very high UV resistance High High High High High High High High High High High Very high Flexibility Very high Fatigue life High Low smoke / Halogen free Self extinguishing High abrasion resistance pprovals UL94 V2 UL94 H RoHS to 2011/65/U LV U200/53/ Page No Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 7

5 TempGuard hinged fittings Type JPH & PH - xternal hinged joiner & external hinged elbow Type JPH - xternal High Temperature Hinged Joiner One-piece joiner and elbow hinged fittings allow a variety of conduit size variations. These fittings are designed to snap together over all types of slit and unslit Harnessflex conduit, maintaining maximum conduit bore. an be used as an in-line reducer as well as an enlarger. Type JPH xternal High Temperature Hinged Joiner onduit Size (N) onduit Size (NW) Nominal Part No. F JPH mm 16mm 10mm 10mm JPH mm 21mm 10mm 10mm JPH mm 26mm 12mm 10mm F onduit Size (N) onduit Size (NW) Nominal Part No. F JPH1208* mm 16mm 10mm 10mm JPH1616* mm 21mm 10mm 10mm JPH2008* mm 26mm 12mm 10mm JPH2016* mm 26mm 12mm 10mm JPH2020* mm 26mm 12mm 12mm *Made to order - Part numbers listed are available to order but not stocked items, and would therefore be subject to manufacturing leadtime Type PH - xternal High Temperature Hinged lbow One-piece joiner and elbow hinged fittings allow a variety of conduit size variations. These fittings are designed to snap together over all types of slit and unslit Harnessflex conduit, maintaining maximum conduit bore. an be used as an in-line reducer as well as an enlarger. Type PH xternal High Temperature Hinged lbow F onduit Size (N) onduit Size (NW) Nominal Part No. F G PH mm 34mm 21mm 10mm 10mm PH mm 34mm 21mm 10mm 10mm PH mm 41mm 26mm 12mm 12mm onduit Size (N) onduit Size (NW) Nominal Part No. F G PH08S08* mm 29mm 20mm 10mm 10mm PH12S12* mm 29mm 20mm 10mm 10mm PH1608* mm 34mm 21mm 10mm 10mm PH2008* mm 39mm 26mm 12mm 10mm PH2016* mm 41mm 26mm 12mm 10mm *Made to order - Part numbers listed are available to order but not stocked items, and would therefore be subject to manufacturing leadtime G 8 Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 9

6 TempGuard hinged fittings Type TPH - xternal hinged T-piece TempGuard hinged fittings Type YPH - xternal hinged Y-piece Type TPH - xternal High Temperature Hinged T-piece One-piece symmetrical 3 junction fittings allow a variety of conduit size variations. These fittings are designed to snap together over all Harnessflex conduits in extreme temperature applications. Type YPH - xternal High Temperature Hinged Y-piece One-piece asymmetrical 3 junction fittings allow a variety of conduit variations. These fittings are designed to snap together over all types of slit and unslit Harnessflex conduit, maintaining maximum conduit bore. Type TPH xternal High Temperature Hinged T-piece F I G H onduit Size (N) onduit Size (NW) Nominal Part No. F G H I TPH mm 31.1mm 17mm 10mm 10mm 10mm TPH mm 31.1mm 17mm 10mm 10mm 10mm TPH mm 31.1mm 17mm 10mm 10mm 10mm TPH mm 31.1mm 17mm 10mm 10mm 10mm TPH mm 31.1mm 17mm 10mm 10mm 10mm TPH mm 31.1mm 17mm 10mm 10mm 10mm TPH mm 31.1mm 17mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 34.8mm 21mm 10mm 10mm 10mm TPH mm 41.0mm 26mm 12mm 10mm 10mm TPH mm 41.0mm 26mm 12mm 10mm 12mm TPH mm 41.0mm 26mm 12mm 10mm 10mm TPH mm 41.0mm 26mm 12mm 10mm 12mm TPH mm 41.0mm 26mm 12mm 10mm 10mm TPH mm 41.0mm 26mm 12mm 10mm 12mm TPH mm 41.0mm 26mm 12mm 12mm 10mm TPH mm 41.0mm 26mm 12mm 12mm 10mm TPH mm 41.0mm 26mm 12mm 12mm 12mm onduit Size (N) onduit Size (NW) Nominal Part No. F G H I TPH081612* mm 31.1mm 17mm 10mm 10mm 10mm TPH100808* mm 31.7mm 17mm 10mm 10mm 10mm TPH101010* mm 31.7mm 17mm 10mm 10mm 10mm TPH101012* mm 31.7mm 17mm 10mm 10mm 10mm TPH121010* mm 31.1mm 17mm 10mm 10mm 10mm TPH121012* mm 31.1mm 17mm 10mm 10mm 10mm TPH121210* mm 31.1mm 17mm 10mm 10mm 10mm TPH160808* mm 34.8mm 21mm 10mm 10mm 10mm TPH161012* mm 34.8mm 21mm 10mm 10mm 10mm TPH161016* mm 34.8mm 21mm 10mm 10mm 10mm TPH201016* mm 41.0mm 26mm 12mm 10mm 10mm TPH201020* mm 41.0mm 26mm 12mm 10mm 12mm TPH201612* mm 41.0mm 26mm 12mm 10mm 10mm *Made to order - Part numbers listed are available to order but not stocked items, and would therefore be subject to manufacturing leadtime Type YPH xternal High Temperature Hinged Y-piece onduit Size (N) onduit Size (NW) Nominal Part No. F G H YPH mm 37mm 10mm 10mm 10mm YPH mm 37mm 10mm 10mm 10mm YPH mm 37mm 10mm 10mm 10mm YPH mm 37mm 10mm 10mm 10mm YPH mm 37mm 10mm 10mm 10mm YPH mm 40mm 10mm 10mm 10mm YPH mm 40mm 10mm 10mm 10mm YPH mm 40mm 10mm 10mm 10mm YPH mm 40mm 10mm 10mm 10mm YPH mm 37mm 12mm 10mm 10mm YPH mm 40mm 12mm 10mm 10mm YPH mm 45mm 12mm 10mm 10mm YPH mm 45mm 12mm 12mm 10mm YPH mm 48mm 12mm 12mm 10mm onduit Size (N) onduit Size (NW) Nominal Part No. F G H YPH mm 37mm 10mm 10mm 10mm YPH mm 37mm 10mm 10mm 10mm YPH mm 37mm 10mm 10mm 10mm YPH mm 37mm 10mm 10mm 10mm YPH mm 37mm 10mm 10mm 10mm YPH mm 40mm 10mm 10mm 10mm YPH mm 40mm 10mm 10mm 10mm YPH mm 40mm 10mm 10mm 10mm YPH mm 37mm 12mm 10mm 10mm YPH mm 37mm 12mm 10mm 10mm YPH mm 37mm 12mm 10mm 10mm YPH mm 37mm 12mm 10mm 10mm YPH mm 40mm 12mm 10mm 10mm YPH mm 45mm 12mm 12mm 10mm *Made to order - Part numbers listed are available to order but not stocked items, and would therefore be subject to manufacturing leadtime F G 30º H 10 Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 11

7 TempGuard two-piece fitting & Swivel interface Two-piece X configuration fitting & MP S Superseal TempGuard external hinged connector interfaces MP Junior & Mini timer Two-piece X onfiguration Fitting Two-piece X configuration fitting providing protection for in-line connectors, fuse links, circuit breakers and splicing areas. The strong construction allows for the protection of delicate connections, or as an alternative when an interface/backshell isn t available. These fittings are designed to snap together over all types of slit and unslit Harnessflex conduit, maintaining maximum conduit bore. MP Junior & Mini Timer - High Temperature xternal Hinged onnector Interface Single junction straight and 90 elbow interfaces providing high integrity, high temperature connection protection between MP Superseal or Junior timer connectors and Harnessflex conduit systems in elevated temperature areas. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. onduit Size (N) onduit Size (NW) onduit ngagement Nominal Two-piece X onfiguration Fitting Part No. F G H I J K XPH mm 7mm 9.5mm 7mm 42.3mm 5.5mm 38mm I G H MP Junior & Mini Timer High Temperature Straight & 90º lbow Swivel Interface onduit Size Nominal Interface onnector Part No. N NW Reference Reference MP Junior & Mini Timer Straight Interface IH08-M mm 21.3mm 18mm 10mm 2 Way * IH08-M mm 27.2mm 18mm 10mm 3 Way * IH08-M mm 32.0mm 19mm 10mm 4 Way * IH12-M mm 21.3mm 18mm 10mm 2 Way * IH12-M mm 32.0mm 19mm 10mm 4 Way * K F J onduit Size Nominal Interface onnector Part No. N NW Reference Reference MP Junior & Mini Timer 90º lbow Swivel Interface IH08-90-M mm 30.3mm 21.3mm 7mm 2 Way * IH08-90-M mm 30.3mm 27.2mm 7mm 3 Way * IH08-90-M mm 30.3mm 32.0mm 7mm 4 Way * IH12-90-M mm 30.3mm 21.3mm 7mm 2 Way * MP S Superseal Swivel Interface - High Temperature xternal Hinged onnector Interface Single junction straight and 90 elbow interfaces providing high integrity, high temperature connection protection between S - MP Superseal connectors and Harnessflex conduit systems. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. MP S Superseal High Temperature Straight & 90º lbow Swivel Interface onduit Size Nominal Interface onnector Part No. N NW Reference Reference MP S Superseal Straight Interface IH08-S mm 20.5mm 18mm 10mm 2 Way * IH08-S mm 26.5mm 18mm 10mm 3 Way * IH08-S mm 33.0mm 18mm 10mm 4 Way * IH12-S mm 20.5mm 18mm 10mm 2 Way * IH12-S mm 33.0mm 19mm 10mm 4 Way * onduit Size Nominal Interface onnector Part No. N NW Reference Reference MP S Superseal 90º lbow Swivel Interface IH08-90-S mm 30.3mm 18mm 10mm 2 Way * xternal straight connector interface ø onduit xternal 90º elbow connector interface ø onduit imensional drawings are the same as MP Junior & Mini Timer See diagrams opposite, on page Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 13

8 TempGuard external hinged connector interfaces mpseal 16 TempGuard external hinged connector interfaces osch ompact mpseal 16 - High Temperature xternal Hinged onnector Interface range of straight and 90 elbow fittings offering a compact and high integrity connection between mpseal automotive connectors and Harnessflex conduit systems. These interfaces provide complete cable protection right up to the connector. They also provide strain relief and protection from high pressure washing, helping to maintain the sealing integrity of the connector. osch ompact - High Temperature xternal Hinged onnector Interface Single junction straight and 90 elbow fittings providing high integrity, high temperature connection between osch ompact connectors and Harnessflex conduit systems in elevated temperature areas. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. MPSL 16 High Temperature Straight & 90º lbow Interface onduit Size Nominal Interface onnector Part No. N NW Reference Reference mpseal 16 Straight Interface IH08-T2PL mm 18mm 34mm 12mm 2 Way * IH08-T3PL mm 18mm 33mm 11mm 3 Way * IH08-T4PL mm 23mm 39mm 13mm 4 Way * IH12-T4PL mm 23mm 37mm 11mm 4 Way * IH12-T6PL mm 23mm 37mm 11mm 6 Way * IH12-T8PL mm 23mm 37mm 11mm 8 Way * osch ompact High Temperature Straight & 90º lbow Interface onduit Size Nominal Interface onnector Part No. N NW Reference Reference osch ompact Straight Interface IH mm 21.3mm 18mm 10mm 2 Way * IH mm 26.7mm 18mm 10mm 3 Way * IH mm 21.3mm 18mm 10mm 2 Way * IH mm 26.7mm 18mm 10mm 3 Way * onduit Size Nominal Interface onnector Part No. N NW Reference Reference mpseal 16 90º lbow Interface IH08-90-T2LP mm 25.0mm 17mm 7.1mm 2 Way * IH08-90-T3LP mm 29.0mm 17.1mm 7.1mm 3 Way * IH08-90-T2PL mm 32.0mm 20.0mm 7.1mm 2 Way * IH08-90-T3PL mm 34.0mm 20.0mm 7.1mm 3 Way * IH12-90-T2LP mm 23.0mm 20.0mm 7.1mm 2 Way * IH12-90-T3LP mm 27.1mm 17.1mm 7.1mm 3 Way * IH12-90-T3LR mm 27.1mm 17.1mm 7.1mm 3 Way IH12-90-T6LP mm 27.5mm 22.5mm 7.1mm 6 Way * NOT: LP = Plug, LR = Receptacle onduit Size Nominal Interface onnector Part No. N NW Reference Reference osch ompact 90º lbow Swivel Interface IH mm 30.3mm 20.5mm 10mm 2 Way * IH mm 30.3mm 26.7mm 10mm 3 Way * IH mm 30.3mm 20.5mm 10mm 2 Way * xternal 90º elbow connector interface xternal straight connector interface xternal 90º elbow connector interface xternal straight connector interface ø onduit onduit Insertion onduit Insertion ø onduit 14 Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 15

9 TempGuard external hinged connector interfaces eutsch - T Series TempGuard external hinged connector interfaces FI utomotive pex eutsch - T Series Interface - High Temperature xternal Hinged onnector Interface Single junction straight and 90 elbow fittings providing high integrity connections between eutsch T connectors and Harnessflex conduitsystems. In addition, 90 elbow versions allow the conduit to swivel 360 around the connector housing, sufficient to avoid the problems associated with one-piece interfaces of overflexing due to movement or vibration. FI utomotive pex Interface - High Temperature xternal Hinged onnector Interface range of straight and 90 elbow fittings offering a compact and high integrity, high temperature connection protection between FI pex automotive connectors or junior timer connectors and Harnessflex conduit systems in elevated temperature areas. These interfaces provide complete cable protection right up to the connector. They also provide strain relief and protection from high pressure washing, helping to maintain the sealing integrity of the connector. eutsch - T Series High Temperature Straight & 90º lbow Swivel Interface onduit Size Nominal Interface onnector Part No. N NW Reference Reference eutsch - T Series Straight Interface IH08-T mm 16mm 18mm 7mm 2 Way T06-2S* IH08-T mm 22mm 24mm 12mm 3 Way T06-3S* IH08-T mm 18mm 27mm 12mm 4 Way T06-4S* IH12-T mm 16mm 18mm 7mm 2 Way T06-2S* IH12-T mm 22mm 24mm 7mm 3 Way T06-3S* IH12-T mm 18mm 27mm 7mm 4 Way T06-4S* IH12-T mm 22mm 27mm 10mm 6 Way T06-6S* IH12-T mm 25mm 30mm 10mm 8 Way T06-8S* FI utomotive pex High Temperature Straight & 90º lbow Swivel Interface onduit Size () Nominal Part No. N NW FI utomotive pex Straight Interface IH08-FI mm 17mm 33mm 12mm IH08-FI mm 17mm 34mm 12mm IH08-FI mm 17mm 34mm 12mm IH12-FI mm 17mm 27mm 7mm IH12-FI mm 17mm 29mm 7mm IH12-FI mm 17mm 29mm 7mm IH12-FI mm 26mm 34mm 10mm onduit Size Nominal Interface onnector Part No. N NW Reference Reference eutsch - T Series 90º lbow Swivel Interface IH08-90-T mm 30mm 19mm 7mm 2 Way T06-2S* IH08-90-T mm 30mm 25mm 7mm 4 Way T06-4S* IH12-90-T mm 30mm 19mm 7mm 2 Way T06-2S* onduit Size () Nominal Part No. N NW FI utomotive pex 90º lbow Swivel Interface IH08-90-FI mm 19mm 48mm 10mm IH08-90-FI mm 19mm 49mm 10mm IH12-90-FI mm 19mm 48mm 10mm Straight connector 90º onnector 16 Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 17

10 High temperature conduit HT High temperature, Modified o-polyester HT Medium Weight High Temperature onduit HT Medium Weight High Temperature - onduit High temperature conduit / Materials: Modified o-polyester / olour: lack (L) onduit Size Nominal O/ Min. ore Min. Static Reel Part No. N NW end Radius Length HT mm 6.2mm 20mm 50m HT mm 8.7mm 15mm 50m HT mm 9.4mm 25mm 50m HT mm 11.0mm 30mm 50m HT mm 16.1mm 40mm 50m HT25* mm 21.0mm 45mm 50m HT28* mm 22.5mm 45mm 50m *Parts numbers listed are available to order but not stocked items, and would therefore be subject to manufacturing leadtime To order quote part number & reel length, e.g. HT08/50m pplications This conduit has been developed for use in where elevated temperatures occur. Suitable for long term exposure, up to 190º. 18 Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 19

11 Harnessflex TempGuard system High temperature wiring harnesses 20 Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 21

12 Index Order code classification Part No. GI No. Page Part No. GI No. Page Part No. GI No. Page IH08-90-M2 7T298010R IH12-FI02 7T298010R TPH T298010R IH08-90-M3 7T298010R IH12-FI03 7T298010R TPH T298010R IH08-90-M4 7T298010R IH12-FI04 7T298010R TPH T298010R IH08-90-S2 12 IH12-FI14 7T298010R TPH T298010R IH08-90-T2LP 7T298010R PH1612 7T298010R TPH T298010R IH08-90-T3LP 7T298010R PH1616 7T298010R TPH T298010R IH08-90-T2PL 7T298010R PH2020 7T298010R TPH T298010R IH08-90-T3PL 7T298010R PH08S08 7T298010R TPH T298010R IH T298010R PH12S12 7T298010R TPH T298010R IH T298010R PH1608 7T298010R TPH T298010R IH08-90-T2 7T298010R PH2008 7T298010R XPH1208 7T298010R IH08-90-T4 7T298010R PH2016 7T298010R YPH T298010R IH08-90-FI02 7T298010R HT08 7T298010R YPH T298010R IH08-90-FI03 7T298010R HT10 7T298010R YPH T298010R IH08-M2 7T298010R HT12 7T298000R YPH T298010R IH08-M2 7T298010R HT16 7T298010R YPH T298010R IH08-M3 7T298010R HT20 7T298010R YPH T298010R IH08-M4 7T298010R HT25 7T298010R YPH T298010R IH08-S2 7T298010R HT28 7T298010R YPH T298010R IH08-S3 7T298010R JPH1208 7T298010R YPH T298010R IH08-S4 7T298010R JPH1212 7T298010R YPH T298010R IH08-T2PL 7T298010R JPH1612 7T298010R YPH T298010R IH08-T3PL 7T298010R JPH1616 7T298010R YPH T298010R IH08-T4PL 7T298010R JPH2008 7T298010R YPH T298010R IH08-2 7T298010R JPH2016 7T298010R YPH T298010R IH08-3 7T298010R JPH2020 7T298010R YPH T298010R IH08-T2 7T298010R TPH T298010R YPH T298010R IH08-T3 7T298010R TPH T298010R YPH T298010R IH08-T4 7T298010R TPH T298010R YPH T298010R IH08-FI02 7T298010R TPH T298010R YPH T298010R IH08-FI03 7T298010R TPH T298010R YPH T298010R IH08-FI04 7T298010R TPH T298010R YPH T298010R IH TPH T298010R YPH T298010R IH12-90-M2 7T298010R TPH T298010R YPH T298010R IH12-M2 7T298010R TPH T298010R YPH T298010R IH12-M4 7T298010R TPH T298010R YPH T298010R IH12-S2 7T298010R TPH T298010R YPH T298010R IH12-S4 7T298010R TPH T298010R YPH T298010R IH12-T4PL 7T298010R TPH T298010R YPH T298010R IH12-T6PL 7T298010R TPH T298010R IH12-T8PL 7T298010R TPH T298010R IH12-90-T2LP 7T298010R TPH T298010R IH12-90-T3LP 7T298010R TPH T298010R IH12-90-T2PL 7T298010R TPH T298010R IH12-90-T3PL 7T298010R TPH T298010R IH12-2 7T298010R TPH T298010R IH12-3 7T298010R TPH T298010R IH12-90-T2 7T298010R TPH T298010R IH12-90-FI02 7T298010R TPH T298010R IH12-T2 7T298010R TPH T298010R IH12-T3 7T298010R TPH T298010R IH12-T4 7T298010R TPH T298010R IH12-T6 7T298010R TPH T298010R IH12-T8 7T298010R TPH T298010R Harnessflex Product Overview TempGuard high temperature wiring harnesses Harnessflex Product Overview TempGuard high temperature wiring harnesses 23

13 ontact us Harnessflex Station Road oleshill irmingham 46 1HT Tel: +44 (0) Fax: +44 (0) UK Sales Tel: +44 (0) UK Sales Fax: +44 (0) Mail: Note: We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. Harnessflex does not accept any responsibility whatsoever for potential errors or possible lack of information in this document. We reserve all rights in this document and in the subject matter and illustrations contained therein. ny reproduction, disclosure to third parties or utilization of its contents in whole or in parts is forbidden without prior written consent of Harnessflex. opyright 2016 Harnessflex ll rights reserved opyright Harnessflex