550 Series Hydraulic Power Units. Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm)
|
|
- Asher Adams
- 6 years ago
- Views:
Transcription
1 Pressures to 207 bar (3000 psi) Flows to 11.4 lpm (3 gpm) 19
2 Power Unit Features We are pleased to introduce our new C hydraulic power units. The combines the features and benefits our customers and markets have requested in a durable and economical package. The integral motor, pump and reservoir are complemented with a full line of Parker D03 and cartridge valve options. dd a linear or rotary actuator and you have a complete hydraulic system solution for your application. Features Numerous motors up to 2 hp 6 pump sizes flows from 1 to 11.4 lpm ( 1 /4 to 3 gpm) Externally adjustable relief valve Variety of reservoirs 207 bar (3000 psi) capability D03 pad or standard P and T ports These high quality power units are ideal for industrial machine tool clamping circuits, dock levelers, food processing, hose crimping, scissor lift, presses, and a myriad of C applications. Let them go to work for you. Your local Parker sales representative will be pleased to provide further information. Typical pplications Machine tool clamping Dock levelers Main lifts Scissors lifts Wheelchair lifts Trash compactors Hose crimpers oat lifts Presses Commercial ovens 20
3 Performance Data 6.6 (400) 550 Power 1725 RPM 13.1 (800) 550 Power 3450 RPM 5.7 (350) (700) (300) (600) 17 Output Flow - lpm (cipm) 4.1 (250) 3.3 (200) 2.5 (150) Output Flow - lpm (cipm) 8.2 (500) 6.6 (400) 4.9 (300) (100) 3.3 (200) (50) 1.6 (100) (500) (1000) (1500) (2000) (2500) (3000) Operating Pressure - bar (psi) Performance data based on 21 C ( 70 F) (500) (1000) (1500) (2000) (2500) (3000) Operating Pressure - bar (psi) Motor Horsepower Recommendations at Flow/Pressure Pump Nominal GPM Pressure ₁ ₄.50 HP.50 HP.50 HP.50 HP.50 HP.50 HP 04 ₁ ₂.50 HP.50 HP.50 HP.75 HP 1.0 HP 1.0 HP 07 ₁ ₂.50 HP.50 HP.50 HP.75 HP 1.0 HP 1.0 HP HP.75 HP 1.0 HP 1.5 HP 2.0 HP 2.0 HP 10 ₃ ₄.50 HP.50 HP.75 HP 1.0 HP 1.5 HP 1.5 HP 10 1 ₁ ₂.50 HP 1.0 HP 1.5 HP 2.0 HP HP.75 HP 1.0 HP 1.5 HP 2.0 HP 2.0 HP HP 1.5 HP 2.0 HP 17 1 ₁ ₄.50 HP 1.0 HP 1.5 HP 2.0 HP 2.0 HP 17 2 ₁ ₂ 1.0 HP 2.0 HP 20 1 ₁ ₂.50 HP 1.0 HP 1.5 HP 2.0 HP HP 2.0 HP Note: Performance data is for reference only 21
4 Technical Specifications Standard Product Ordering Code POWER UNIT - includes relief valve MOTOR SELECTION - TEFC Single Phase = 115/230 VC, 60 HZ Three Phase = 230/460 VC, 60 HZ CODE HP RPM PHSE TC Single TD Three TM Single TT Three TE Single TF Three TN Single TU Three TJ Single TK Three TP Single TW Three TL Single TO Three TQ Single TX Three TV Single TR Three TS Single TY Three PUMP SIZE CODE DISPLCEMENT CIPR CIPR CIPR CIPR CIPR CIPR RESERVOIR CODE VOLUME Gal. Steel Gal. Steel Gal. Steel Gal. Steel Gal. Plastic Gal. Plastic Gal. Plastic Gal. Plastic CIRCUIT CODE DESCRIPTION D0 D03 Pad & Extension Fittings D1 D03 Pad with Dual PO Check Manifold (Manapak) (for use with D03 Directional Control Valves) S Standard Pressure & Tank Ports SW Std P & T Ports with Outlet Port Check Valve Two Position Two Way Cartridge Valves Following circuits include outlet port check valve: S1 12 VDC, Normally Closed, Conduit Connector S2 24 VDC, Normally Closed, Conduit Connector S3 120 VC, Normally Closed, Conduit Connector S4 240 VC, Normally Closed, Conduit Connector S5 12 VDC, Normally Open, Conduit Connector S6 24 VDC, Normally Open, Conduit Connector S7 120 VC, Normally Open, Conduit Connector S8 240 VC, Normally Open, Conduit Connector Note: 5 gal. steel reservoir can be mounted vertically only. ll others are vertical and horizontal ready P1 P2 P3 P4 P5 P6 P7 P8 12 VDC, Normally Closed, DIN Connector 24 VDC, Normally Closed, DIN Connector 120 VC, Normally Closed, DIN Connector 240 VC, Normally Closed, DIN Connector 12 VDC, Normally Open, DIN Connector 24 VDC, Normally Open, DIN Connector 120 VC, Normally Open, DIN Connector 240 VC, Normally Open, DIN Connector 22
5 Technical Specifications FLOW CONTROL (for use with Cartridge Valves) CODE DESCRIPTION NN None (use with D0 and D1 circuits) HP None (use with all other circuits) F1 Press. Comp.,.5 to 1.0 GPM F2 Press. Comp., 1.0 to 2.0 GPM 4-WY VLVE (LL D03 SIZE) CODE DESCRIPTION NNN No 4-Way Valve Included 01Y Closed Center, 120 VC, Conduit Connectors 01T Closed Center, 240 VC, Conduit Connectors 01K Closed Center, 12 VDC, Conduit Connectors 01J Closed Center, 24 VDC, Conduit Connectors 02Y Open Center, 120 VC, Conduit Connectors 02T Open Center, 240 VC, Conduit Connectors 02K Open Center, 12 VDC, Conduit Connectors 02J Open Center, 24 VDC, Conduit Connectors 07Y Float Center, 120 VC, Conduit Connectors 07T Float Center, 240 VC, Conduit Connectors 07K Float Center, 12 VDC, Conduit Connectors 07J Float Center, 24 VDC, Conduit Connectors 08Y Tandem Center, 120 VC, Conduit Connectors 08T Tandem Center, 240 VC, Conduit Connectors 08K Tandem Center, 12 VDC, Conduit Connectors 08J Tandem Center, 24 VDC, Conduit Connectors 30Y Single Solenoid, 120 VC, Conduit Connector 30T Single Solenoid, 240 VC, Conduit Connector 30K Single Solenoid, 12 VDC, Conduit Connector 30J Single Solenoid, 24 VDC, Conduit Connector RV SETTING In multiples of 100 psi Examples 04 = 400 psi 12 = 1200 psi 29 = 2900 psi Y01 T01 K01 J01 Y02 T02 K02 J02 Y07 T07 K07 J07 Y08 T08 K08 J08 Y30 T30 K30 J30 Closed Center, 120 VC, Hirschmann w/out Plugs Closed Center, 240 VC, Hirschmann w/out Plugs Closed Center, 12 VDC, Hirschmann w/out Plugs Closed Center, 24 VDC, Hirschmann w/out Plugs Open Center, 120 VC, Hirschmann w/out Plugs Open Center, 240 VC, Hirschmann w/out Plugs Open Center, 12 VDC, Hirschmann w/out Plugs Open Center, 24 VDC, Hirschmann w/out Plugs Float Center, 120 VC, Hirschmann w/out Plugs Float Center, 240 VC, Hirschmann w/out Plugs Float Center, 12 VDC, Hirschmann w/out Plugs Float Center, 24 VDC, Hirschmann w/out Plugs Tandem Center, 120 VC, Hirschmann w/out Plugs Tandem Center, 240 VC, Hirschmann w/out Plugs Tandem Center, 12 VDC, Hirschmann w/out Plugs Tandem Center, 24 VDC, Hirschmann w/out Plugs Single Solenoid, 120 VC, Hirschmann w/out Plug Single Solenoid, 240 VC, Hirschmann w/out Plug Single Solenoid, 12 VDC, Hirschmann w/out Plug Single Solenoid, 24 VDC, Hirschmann w/out Plug 23
6 Circuits S CIRCUIT SW CIRCUIT S1-S4, P1-P4 CIRCUITS S5-S8, P5-P8 CIRCUITS 24
7 Circuits P T P T S1-S4, P1-P4 CIRCUITS WITH PRESSURE COMPENSTED FLOW CONTROL F1 OR F2 S5-S8, P5-P8 CIRCUITS WITH PRESSURE COMPENSTED FLOW CONTROL F1 OR F2 CLOSED CENTER FLOT CENTER SINGLE SOLENOID OPEN CENTER TNDEM CENTER P T P T D0 CIRCUIT (D03 VLVE TO E SELECTED) D1 CIRCUIT INCLUDES MNPK DUL P0 CHECK VLVE (D03 VLVE TO E SELECTED) 25
8 Dimensions Dimensions (5.30) (5.32) 88.9 (3.50) SINGLE PHSE ONLY MOTOR HEIGHT ( ) 24.1 (0.95) 9/16-18 UNF-2 SE-6 STR THD O-RING PORTS 25.8 (1.02) 24.1 (0.95) FILLER/RETHER 51.3 (2.02) (7.55) /2 GL (9.90) (2 LITER) 1 GL (12.25) (4 LITER) 1-1/2 GL (5.6 LITER) (16.95) 2-1/2 GL (9.5 LITER) (8.50) (9.13) 87.4 (3.44) (6.25) shown with P and T ports and plastic reservoir Ø182.1 MX (7.17) 62.0 (2.44) 62.0 (2.44) Note: When mounted in the horizontal configuration the 2 1 /2 gallon plastic reservoir must be supported (6.50) ( ) 76.2 (3.00) 65.0 (2.56) 4X 8.6 (.34) SLOT THIRD NGLE PROJECTION Motor foot dimensions are common to all electric motors Note: ll dimensions in mm (inches). 26
9 Dimensions (5.30) (5.32) 88.9 (3.50) SINGLE PHSE ONLY MOTOR HEIGHT ( ) 9/16-18 UNF-2 SE-6 STR THD O-RING PORTS RELIEF VLVE 25.8 (1.02) TWO WY VLVE (OPTIONL) LEDS 18G (24.00) LONG STRIPPED ENDS 24.1 (0.95) (3.99) PT (7.00) 1/2 GL (2 LITER) (12.00) 1 GL (4 LITER) 24.1 (0.95) (16.00) 1-1/2 GL (5.6 LITER) FILLER/RETHER 98.0 (3.86) 51.3 (2.02) RETURN FLOW CONTROL (OPTIONL) THIRD NGLE PROJECTION (5.53) shown with optional solenoid 2-way valve and steel reservoirs Note: ll dimensions in mm (inches). 27
10 Dimensions 28.6 (2.31) (9.12) THIRD NGLE PROJECTION 63.6 (2.51) (4.88) 66.8 (2.63) 91.3 (3.60) 88.9 (3.50) (5.32) 2X 9/16-18 UNF-2 FLRE TUE END (OPTIONL) (5.32) Ø182.1 MX (7.17) MOTOR HEIGHT ( ) FILLER/RETHER 66.8 (2.63) SINGLE PHSE ONLY NFP-D03 MOUNTING PTTERN DIRECTIONL CONTROL VLVE (OPTIONL) 25.8 (1.02) 51.3 (2.02) (12.19) 34.9 (1.38) 50.8 (2.00) (10.00) (12.00) 50.8 (2.00) 34.9 (1.38) OPPOSITE SIDE 4X Ø9.53 (0.375) RESERVOIR MNT HOLES (14.26) (15.26) shown with D03 valve and 5 gallon reservoir Note: ll dimensions in mm (inches). 28
500 Series Hydraulic Power Units Pressures to 3000 psi Flows to 3 gpm
Pressures to 3000 psi Flows to 3 gpm Catalog B500/USA November 2000 11 Power Unit Features The hydraulic power units offer you the durability of top quality industrial power units in an economical package.
More informationPower Units. Page. (M) = Mobile (I) = Industrial (B) = Mobile & Industrial
Power Units Page (M) = Mobile (I) = Industrial () = Mobile & Industrial (I) 143-144 (I) 145-152 (I) 145-152 (I) 145-152 Power Units (Industrial) D-Pak 5 Gallon D-Pak style power units are ideal for many
More informationPressure Control Valves Series R. General Description. Specifications. Flow Data
Catalog Y14-2502/US Technical Information Series R General Description Series R direct relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. Specifications
More informationBW0511FP. ByWire Elements BW0511FP Flow Sharing Element Interface IBW0511
ywire Elements Flow Sharing Element Interface IW05 efore use, carefully read the GENERL INSTRUCTIONS FOR USE OF DIRECTIONL CONTROL VLVES Technical data Nominal flow Nominal pressure 35 l/min - P=8 bar
More informationWORKING TOGETHER FOR A BETTER SOLUTION ELECTRIC MOTORS C FLANGES - DIRECT MOUNT & AC/DC - POWER UNITS HCHYDROCUSTOM.COM
WORKING TOGETHER FOR A BETTER SOLUTION ELECTRIC MOTORS C FLANGES - DIRECT MOUNT & AC/DC - HCHYDROCUSTOM.COM ELECTRIC MOTORS ELECTRIC MOTORS TEFC MOTORS CHOICE OF 1/3 TO 20HP 1800 RPM (3600 RPM AVAILABLE)
More informationHydraulic Motor & Brake
SERIES 500-501 - 510-511 - 520-521 - 530-531 - 50-51 - MEDIUM DUTY Hydraulic Motor & rake RE RE (ll Series) For Medium Duty pplications Overview series descriptions RE Series motors offer the perfect compromise
More informationCVH103P. Check Valve Series CVH103P. Technical Information. General Description
Catalog HY-351/US Information Cartridge Style Valve. For additional information see Tips on pages 1-4. Valve Series H13P Spherical poppet for low leakage D -Ring eliminates back-up rings Dual sense paths
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationCATALOG SUPPLEMENT LITTLE CHAMP TM
CTLOG SUPPLEMENT LITTLE CHMP TM ecause Continental Hydraulics is continually improving its products, specifications and appearance are subject to change without notice. Continental Hydraulics Division
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationSeries OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
SERIES 0-1 - LIHT DUTY Hydraulic Motor RS RS (ll Series) For Light Duty pplications Overview RS Series motors are the most economical model in the White Drive Products product line, but are not low-tech.
More informationPower Units. H-Pak & V-Pak. V-Pak Low Profile. Performance Data
ower Units H-ak & V-ak H-ak and V-ak style power units are ideal for many industrial applications. These space saving vertical style units are available with gear or piston pumps and are designed for quiet
More informationPower Units and Valves
Power Units and Valves Page Power Units Valves, Mounting Kits & Manifolds Worksheet Features Gear Pump Vane Pump With Manifolds With D03 Manifolds Power Unit Matrix D03 Valves D03 Accessory Valves D03
More informationDT (700 Series) Hydraulic Motor
DT (700 Series) Hydraulic Motor shafts 45 60mm Tapered 47 2-1/4 Straight 16.0 [.631] 15.9 [.629] 10.0 [.395] 9.9 [.391] 35 [1.37] 7 [.29] *120 [4.73] 70 [2.75] 38.9 [1.530] 37.6 [1.480] 12.7 [.501] 12.7
More information8000 Series Open Loop Pumps
Table of Contents Features and enefits 2 Specifications 3 Shaft Torque Ratings 4 Pressure Pick-ups 4 Controls Pressure Compensator 5 Dual Pressure Compensator 5 Soft Start Pressure Compensator 6 Load Sensing
More informationPROPORTIONAL DIRECTIONAL CONTROL VALVES PILOT OPERATED WITHOUT LVDT TYPICAL PERFORMANCE SPECIFICATIONS W/O LVDT, OPEN INNER LOOP MOUNTING SURFACE
ED8M PILOT OPERTED WITHOUT TYPICL PERFORMNCE SPECIFICTIONS W/O, OPEN INNER LOOP MOUNTING SURFCE NFP/T3.5.1M R1-1984 D8 (Formely D6) NSI/B93.7M-1986 ISO SIZE 8 These proportional directional control valves
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series inline sub-base non plug-in Manifold mounting 35 stacking sub-base non plug-in sub-base with pressure regulators sub-base with
More informationSeries PHP10 Variable Volume, Piston Pumps
Catalog HY13-1553-1/N,EU Series PHP1 Series PHP1 Variable Volume, Piston Pumps Bulletin 2-18/US 123 Catalog HY13-1553-1/N,EU Series PHP1 Performance Information Series PHP1 Pressure Compensated, Variable
More informationLarge Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
More informationSolenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
More informationTransporter Current Flow Diagram No. 8 / 1 Edition
Side 1 av 18 Transporter Current Flow Diagram No. 8 / 1 Edition 10.1997 Transporter - Base equipment From January 1996 For alternatives to relay and fuse positions as well as multi-pin connector wiring
More informationDirectional Control Valves. General Description. Features. Specifications
Technical Information General Description directional control valves are high-performance, 4-chamber, direct operated, wet armature, solenoid controlled, 3 or 4-way valves. They are available in 2 or 3-position
More informationSolenoid valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm)
Hydraulic Screw-in Cartridge Valves (SiCV) Solenoid valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) Solenoid valves SOLENOID VLVES...- SV5-8-C/CM
More informationkysimply Unique Unique 7000 Series
. kysimply Unique ky Unique 7000 Series General Information The Unique 7000 Series is an innovative new generation of Tri-Clover single seat valves that are designed to meet the highest process demands
More informationSérie D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US
Série D3 Válvula Direcional CETOP 5 e NG 10 Catálogo HY14-2502/US Catalog HY14-2502/US Introduction pplication Series D3 hydraulic directional control valves are high performance, direct operated 4-way
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 275-276 - 277-278 - 280-281 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WG WG (ll Series) For Light Duty pplications whitedriveproducts overview The White Drive
More informationwhitedriveproducts SERIES Hydraulic Motor LIGHT DUTY
whitedriveproducts SERIES 125-126 - LIGHT DUTY Hydraulic Motor www.cenhyd.com 1(800)264-9571 WM WM (ll Series) For Light Duty pplications whitedriveproducts overview The WM product line with spool valve
More informationMultimar. Universal Gage 844 T for external and internal dimensions
- 10-4 Multimar. Universal Gage 844 T for external and internal dimensions The Universal Gage Multimar 844 T. Easy to use and versatile; ideal for all your measuring requirements in dimensional metrology.
More informationStandard Power Packs Variable Displacement
Standard Power Packs Variable Displacement Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 000 PSI max. Flow: 4.2 to 1 GPM Variable displacement
More informationGROUP 11 HYD. PUMPS & VALVES
GROUP 11 HYD. PUMPS & VALVES T944 EXTENDO PUMP INSTALLATION, FL-14490... 11-2 PUMP ASSEMBLY, LL-7500-11... 11-4 PUMP ASSEMBLY, LL-7500-11, (PUMP SECTION, LL-7501-15)... 11-6 PUMP ASSEMBLY, LL-7500-11,
More informationSeries: SE (Standard) & 3SE
www.cranepumps.com Series: SE (Standard) & 3SE SE Standard: SE51 086040 SE51A 086041 SE51AU 090623 SE52 086042 SE52A 090626 SE52AU 090627 3SE: 3SE514L 086051 3SE524L 086052 3SE594L 086053 3SE544L 086054
More informationDirectional Control Valves Series D111VW. General Description. Features. Performance Curves
Technical Information General valves are piloted by a D1VW valve. The valves can be ordered with position control. The minimum pilot pressure must be ensured for all operating conditions of the directional
More informationkysimply Unique Unique 7000 Series Y-Body
. kysimply Unique ky Unique 7000 Series Y-body General Information The Unique 7000 Series is an innovative new generation of Tri-Clover single seat valves that are designed to meet the highest process
More informationDirect solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in Sub-base plug-in Manifold mounting Sub-base non plug-in Sub-base plug-in 33 34 36 32 onded spool
More informationTransporter Current Flow Diagram No. 80 / 1 Edition
Side 1 av 13 Transporter Current Flow Diagram No. 80 / 1 Edition 05.2003 2.5 l/65 kw direct injection turbo diesel, engine code AJT From May 1999 2.5 l/75 kw direct injection turbo diesel, engine codes
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-NSeries Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N conforms
More informationSV SOLENOID OPERATED
Directional Control Valves SV Work Sections Type -T Solenoid Operated Type -S Solenoid and Manual Operation STANDARD FEATURES Open center or closed center applications Port relief options available Internal
More informationBIROTATIONAL POWER PACK
HYDRAULIC SYSTEMS DIVISION Outstanding Hydraulic Products, Service and Expertise, Worldwide FEATURES / BENEFITS Reduces wiring, leak paths and eliminates directional valves resulting in lower overall system
More informationLOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS
Directional Control Valves LOAD SENSE SECTIONS NEED NEW PIC Series 20 STANDARD FEATURES Control and reduced Dead Band (20I) and Tie Rod Kits SPECIFICATIONS Pressure Rating Foot Mounting Maximum Operating
More information1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1
1.20 L INEAR ACTUATOR: AIR CYLINDER A IR CYLINDER BORE SIZES Ø20~100MM Double acting Clean line A substantial reduction in overall length compared to tie bar designed cylinders High velocity Magnetic piston
More informationHousings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
More informationMODEL RD5000 MONO-BLOCK. Model RD5100. Model RD5200. Model RD5300. Directional Control Valves 1, 2, 3 Spool VALVES CATV
MOEL R5000 MONO-LOK irectional ontrol Valves 1, 2, 3 Spool Model R5100 VLVES Model R5200 Model R5300 TV 39-07-13-02 MOEL R5000 IMENSIONL T VLVES 7.25 5.25 OPTIONL, TOP OR OTTOM PORTING (OUTLET PORT) 5.00
More informationManapak Sandwich Valves. General Description
echnical Information Series RM General Description RM Series relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. With D3 size, they can also be configured
More informationSeries: SE (Standard) & 3SE-L
www.cranepumps.com Series: SE (Standard) & 3SE-L SE: SE51 104871 SE51A 104872 SE51AU 104873 SE52 104874 SE52AU 104875 SE594L 104881 SE544L 104882 SE554L 104883 SE774L 104884 SE794L 104885 SE744L 104886
More informationELECTRIC HYDRAULIC PUMP
Parts List for: Form No. 03 SPX Corporation 88 th Street Rockford, IL 09-399 US Internet ddress: http://www.powerteam.com Tech. Services: (800) 4-83 Fax: (800) -83 Order Entry: (800) 4-48 Fax: (800) 88-03
More informationF SERIES GEAR PUMP. 2 Muncie Power Products, Inc Muncie Power Products, Inc.
ALL NEW DESIGN F SERIES GEAR PUMP ALL NEW DESIGN Ultimate power and performance in a small package best describes the all new F Series gear pumps. Designed exclusively for those low flow applications.
More informationPILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
More informationProportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34
Control Cartridge Valves: PSV10-34 & PSV12-34 SCHEMATIC PRESSURE* FLOW CAVITY COIL Page 2 PSV10-34-02 250 BAR 3600 PSI 22 LPM 6 GPM SDC10-4 M16-26W R16-20W Page 4 PSV12-34-02 260 BAR 3770 PSI 50 LPM 13
More informationEuroVan No. 73/1. Wiring diagram. 2.8L - Engine - Motronic Multiport Fuel Injection (MFI)/103 kw, code AES
EuVan No. 7/ Automatic transmission fm September 998.8L - Engine - Motnic Multiport Fuel Injection (MFI)/0 kw, code AES Deviate relay location and fuseplacements as well as the locations of multiple connectors
More informationCatalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-351/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2A2... C8-2... Increase
More informationSolutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton. h y d r a u l i c s. Variable Displacement Piston Pump.
H y d r a u l i c s ydraulics Eaton h y d r a u l i c s Variable Displacement Piston Pump Manual Controlled Servo Controlled We Manufacture Model 70160 20, cm /r [1.24 in /r] 2,6 cm /r [1.44 in /r] Model
More informationPILOT OPERATED PRESSURE RELIEF VALVE SERIES - IN-LINE MOUNTING
CONTINENTL HYDRULICS PR*W - PR*WU PILOT OPERTED PRESSURE RELIEF VLVE SERIES - IN-LINE MOUNTING 5505 WEST 123RD STREET SVGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTLHYDRULICS.COM PRECISE PR*W -
More informationDMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.
Catalog HY-/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. /GPM BAR/PSI DL8... C8-... Position, Way, N.C. Poppet,... Pull to Open.../8... /... DL... C-... Position, Way, N.C. Poppet,... Pull
More informationCatalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI
Catalog HY15-352/US Contents SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI PRESSURE RELIEVING AP1B2YP... 2G... Increase /Increase Current...5.3/1.4... 35/5... 7-8 AP2B2YP... C8-2...
More informationSolutions. We Manufacture. i Hydraulics. Eaton. Variable Displacement Piston Pump. Manual Controlled
Eaton s y c h Variable Displacement Piston Pump i Hydraulics d r Manual Controlled l a Model 70160 20, cm/r [1.24 in/r] 2,6 cm/r [1.44 in/r] u u l Model 7060 40,6 cm/r [2.48 in/r] 49,2 cm/r [.00 in/r]
More informationPilot-Operated Pressure Relief Valve Series RM
Characteristics Pilot-Operated Relief alve The pilot-operated pressure relief valves from the Parker Manapak series RM are sandwich plate valves designed for stacking beneath a directional valve with a
More informationIFP VTM42 POWER STEERING PUMPS
IFP VTM42 POWER STEERING PUMPS * Compact Power Source for Steering Assemblies * Integral Relief and Flow Control * High Efficiency * Balanced Cartridge Design * Quiet Operation IFP Power Steering Pump
More informationSolutions. We Manufacture. H y d r a u l i c s. Eaton Medium Duty Piston Pump. h y d r a u l i c s
H y d r a u l i c s ydraulics Eaton Medium Duty Piston Pump h y d r a u l i c s Model 70122, 70422, 70423, and 70523 or -Flow Compensated Piston Pumps We Manufacture April 1997 Solutions S o l u t i o
More information1.56 L INEAR A CTUATORS: AIR C YLINDERS S ERIES CA1
1.56 L INEAR A CTUATORS: AIR C YLINDERS A IR C YLINDER Auto switch sensing optional s Ø4, 5, 63, 8, 1 Non-rotating piston rod & double rod types available Ultra low friction, maximum 5% Long life, high
More informationPower closing assist,
No. 3/ Power closing assist, from June 003 Note: Information for Relay and fuse arrangements Connector arrangements Control odules and Relays Ground connections Component Locations! No. 3/ B40 B3 B40 B399
More informationContent. How to Order... Custom Worksheet... Cmmon Application Circuits... Typical Central Manifold, Cavities and Valves Central Manifold...
HYDRAULIC Compact Power Unit Super Nutech Supply Inc, 2008-2009 Copyright Superior Nutech Supply Inc, 2008-2009 Copyright Ontario, Canda Ontario, Canada WWW.SUPERIORNUECH.COM WWW.SUPERIORNUECH.COM i Content
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationM/1000, Heavy Duty Cylinders Double Acting
> > Ø 2 to 12 (50 to 305 mm) > > Extremely rugged heavy duty construction - ideal for use in the most arduous conditions. > > Large range of bore sizes - ideal for a wide variety of industrial applications.
More informationPOWER UNITS CATALOG INNOVATIVE MOBILE SOLUTIONS
POWER UNITS CATALOG INNOVATIVE MOBILE SOLUTIONS ABOUT US INNOVATIVE MOBILE SOLUTIONS OUR CAPABILITIES Eagle Hydraulic Inc. is a Canadian based manufacturer of engineered and standard hydraulic cylinders.
More informationFill cap with inlet strainer (40 mesh) Automatic approved quick connect inlet (no strainer)
GPO ubricator Motor-driven gear pump, Oil General The GPO ubricator is a motor-driven gear pump that is designed for use with single line centralized lubricating systems utilizing progressive distributors
More informationMDT. Monoblock directional control valves MDT - Directional control valve
Monoblock directional control valves - Directional control valve efore use, carefully read the GENERL INSRUCIONS FOR USE OF DIRECIONL CONROL VLVES echnical data Nominal flow 35 l/min 9. US gpm Nominal
More informationAGILENT VACUUM VALVES
GILENT VCUUM VLVES 2-3 gilent Vacuum Valve Solutions 4-23 gilent High Performance Valves 24-27 Stainless Steel Tube Valves 28-29 Electromagnetic Block Valves 30 Variable Leak Valves GILENT VCUUM VLVE SOLUTIONS
More informationFilter/Cooler Module. Advantages: RA 50127/ /12 Replaces: Model MFC3, MFN3, MNC3
Electric Drives and Controls Hydraulics Linear Motion and Assembly Technologies Pneumatics Service Filter/Cooler Module RA 50127/12.11 1/12 Replaces: 03.07 Model MFC3, MFN3, MNC3 4 19 Horsepower Removal
More informationGVI Series Industrial Globe Valves for Flow Control
Series Industrial Globe Valves for Flow Control 2-way Flow Control Globe Valves ssured utomations Series Industrial Globe Valves are contructed with rugged carbon steel or stainless steel bodies. They
More informationEuroVan No. 1/1. Wiring diagram. Deviate relay location and fuseplacements as well as the locations of multiple connectors see section component
EuVan No. / EuVan - Standard Equipment fm December 000 Deviate relay location and fuseplacements as well as the locations of multiple connectors see section component locations. 4 6 7 TK m. L. KL K KL
More informationSD2E-A4. Functional Description. 4/2 Way Solenoid Operated Directional Control Valves Spool Type HA /2014. Replaces HA /2013
/ Way Solenoid Operated Directional Control Valves Spool Type SDE- /-6 UNF p max 50 bar (5076 PSI) Q max 0 L/min (7.9 GPM) 07/0 Replaces 0/0 Hardened precision working parts High flow capacity High transmitted
More informationPILOT OPERATED PRESSURE RELIEF VALVE - Series VR4V
PILOT OPERTED PRESSURE RELIEF VLVE - Series VR4V The Veljan Pressure Relief Valve series VR4V are pilot operated and work Internal Dra on the prciple of hydraulic balancg. These valves are used to limit
More informationHidro Pnevmo Tehnika 3,Vojeli St.,Kazanlak, Bulgaria Tel.: / Fax : +359/
Tehnika 3,Vojeli St.,Kazanlak, Bulgaria Tel.: +359 431/ 62 228 Fax : +359/ 62 019 DIRECTIONL CONTROL VLVES RS04.. /.. BV 99 /... RS06 V.. /.. RHB06-.. /..... RS06 V.. /.. 4/2 RH06/20 RM 06 /.. 4/2 RH06/20.
More informationCompact plastic limit switches with positive opening mechanism
Compact limit switches with positive opening mechanism LJK-N Series Positive opening mechanism Positive opening mechanism meets standards worldwide. A wide variety of actuators is available. The LJK-N
More informationMonarch D.C. Hydraulic Power Systems. Comprehensive information may be found on the page referenced below each selection category.
Monarch D.C. Hydraulic Power Systems MODEL M-319 Description: Pump/Motor/Reservoir/Valve Check Valve 2-Way/2-Position Normally Closed Solenoid Operated Lowering Valve Externally Adjustable Relief Valve
More informationModel Model Model Model Back to Back. Medium Pressure Piston Pump Variable Displacement Closed Circuit
Medium Pressure Piston Pump Variable Displacement Closed Circuit Model 76 2.3 cm 3 /r [.24 in 3 /r] 23.6 cm 3 /r [.44 in 3 /r] Model 736 4.6 cm 3 /r [2.48 in 3 /r] 49.2 cm 3 /r [3. in 3 /r] Model 724 4.6
More informationPILOT OPERATED PRESSURE CONTROLS - FLANGED TYPE VR5 Series
PILOT OPERTED PRESSURE CONTROLS FLNGED TPE VR5 Series Veljan Flanged type, Valves Series VR5V ( Relief ), VR5U (Unloader) and VR5S (Sequence ) are pilot controls. These range of valves are suitable for
More informationCOILS DELTA POWER COMPANY
COILS COMPANY Section / Description page COIL DATA... CD3 IMMERSION PROOF... CD16 GENERAL CARTRIDGE VALVE INSTALLATION NOTES... CD19 CAD INSERTION CODES - 2D... CD20 CAD INSERTION CODES - 3D... CD22 Page
More informationCROSS HYDRAULICS PTY LTD SECTION
OVERVIEW The motor series is an economical alternative to more complex geroler designs that still provides high efficiency across a wide performance range. These motors are intended for medium-duty applications
More informationPROCESS & AUTOMATED VALVES
Process & utomated Valves HYDC s line of Process and utomated Valves complements our isolation valve knowhow and ability to supply high quality solutions to your valve requirements. 3-1 HV Series Inline
More informationDC Series. 4-Way Directional Control Valve With Or Without Flow Control PDC16T4PBS PDCF16TM454LF
Engineering & Manufacturing Solutions Specifications: Rated for 0-45 gpm (0-170 lpm) Rated for 3000 psi (207 bar) Std. port sizes (Consult factory for others) - 3/4 NPT all ports - #16 SAE (1-5/16-12)
More informationV 20 F - 1 P 13 S - 1 A 8H 22 L. Std. cover. 1/2 NPT thd. (V10 only) 3/4 NPT thd. (V20 only) 3/4-16 St. thd. (V10F & V20F) 3/4 16. St. thd.
Model Codes V 2 F - 1 P 13 S - 1 8H 22 L 1 2 3 4 5 6 7 8 9 1 11 12 1 Vane pump 2 Series 1 or 2 3 Integral valve options (Omit if not required) F Flow control & relief P Priority valve & relief 4 Mounting
More informationFP HYDRAULIC POWER PACK
FP HYDRULIC POWER PCK June 2011 Symbols used Side where flange is attached Ground floor Electrical connection boxes on C motors Poles and/or starting relays on DC motors Important! (Important data/information)
More informationPNEUMATIC RACK & PINION ACTUATOR
PNEUMATIC RACK & PINION ACTUATOR Automax S-Series DOUBLE ACTING SPRING RETURN 1 Integral travel stops in both directions with 10 degrees of overtravel to assure precise adjustment of both the open and
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationPol Ind Les Comes C/Alemania, 43 Nave Igualada (Barcelona) Telf Fax
A B I N A Table of Content REMOTE CONTROL RELIEF VALVE... 1-1 DIRECT TYPE RELIEF VALVE... 1-3 SUBPLATE... 1-6 PILOT OPERATED RELIEF VALVE... 1-7 SUBPLATE...1-11 LOW NOISE TYPE PILOT OPERATED RELIEF VALVE...1-13
More informationPerformance Information Series PVP 100/140 Pressure Compensated, Variable Volume, Piston Pumps
Catalog HY13-155-2/US Technical Information Series PVP 1/14 Performance Information Series PVP 1/14 Compensated, Variable Volume, Piston Pumps Features High Strength Cast-Iron Housing for Reliability and
More informationCHECK VALVE - DIRECT OPERATED - Series VC4V SPECIFICATIONS PERFORMANCE CURVES VC4V03 VC4V10 VC4V06
CHECK VLVE - DIRECT OPERTED - Series VV Veljan Direct operated Check Valve Series VV are poppet type and designed for a maximum pressure of 35 bar and a flow capacity rangg from 18 l/m for a 3/8 valve
More informationNew Fixed Displacement Industrial Hydraulic Power Packs
New Fixed Displacement Industrial Hydraulic Power Packs Designed for Industrial Applications... Delivered in Minimal Time... Standard Features: Pressures up to 3000 PSI Flow: 0.4 to 10 GPM Fixed displacement
More informationCustomized ELECTRO-HYDRAULIC CONTROL SYSTEM
Customized ELECTRO-HYDRAULIC CONTROL SYSTEM ELECTRO-HYDRAULIC CONTROL SYSTEM 2 Since the founding of Automation Technology (ATI) more than 20 years ago, we have been recognized for innovation and dependability
More informationTable of Contents.
3551 Table of Contents Operating Information...2 Hydraulic Information Diagrams...7 Hydraulic and Electrical Installation...10 Parts List...11 Troubleshooting...15 Page 1 M3551 M3551 Operating Information
More informationGPM PSI LPM BAR MODEL CAVITY PAGE IF-S3A special IF-S3D special IG-S4A special 198
Transmission & Brake Spool Valves Screw-in style GPM PSI LPM BAR MODEL CAVITY PAGE 2 1000 8 70 TC-S3A 5/8-18 186 6 1000 23 70 TF-S3A 7/8-14 188 6 1000 23 70 TF-S3D 7/8-14 190 5 1000 20 70 TG-S4A 7/8-14
More informationEaton. Revised June, Heavy Duty Hydrostatic Transmissions. l r. Models 33 through 76 Hydrostatic Transmissions. We Manufacture.
s Eaton Revised June, 1997 c Heavy Duty Hydrostatic Transmissions h i y d l ydraulics r a u u l c a i r s y d Models 33 through 76 Hydrostatic Transmissions We Manufacture Solutions H S o l u t i o n s
More informationDimensions / Technical Data / Order Codes
Fluid Level / Temperature Indicators / / rder odes Level Gauge SN D Design of Scale Plates Thermometer ptions apillary Tube Thermometer with a dual elsius / Fahrenheit scale up to +80 / +80 F L3 YUR LG
More informationMOVICONTROL. Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ.
Single and Double Fixed Vane Pumps SERIES V10, V20, 25V/VQ, 35V/VQ, 45V/VQ www.movicontrol.com.br V10/V20 Series Features Balanced vane type pumps are excellent for medium- to low-pressure mobile and industrial
More informationCenter Center Exhaust Pressurized PS-32AS PS-32BS PS-32AD PS-32BD PS-520S PS-520D PS-53CD PS-53ED PS-53PD. Series PS. Function
DIRECTIONL CONTROL VLVES Directional Control Valves PS-SERIES 3/2, 5/2 and 5/3-way Single and double acting control Long lifespan Low energy consumption Standard manual override Wide range of operating
More informationwhite drive products SERIES HYDRAULIC MOTORS
white drive products WR SERIES HYDRULIC MOTORS WR overview The WR Series motor incorporates the latest advances for smooth performance, efficiency and durability. It features an optimized Roller Stator
More informationMB-2 Chapters Monoblock Directional Control Valves
M-2 hapters Working condition.5 Ordering code.6 Dimensions.8 erformance data.9 Inlet relief options.1 Spool options.11 side options.14 side spool positioners.16 Inlet options.2 1 For Mobile nd Industrial
More information