elsto.eu Hadeflex X / TX / F Type X Type TX Type F Flexible Couplings Green Solutions Power, Control &
|
|
- Virgil Hampton
- 5 years ago
- Views:
Transcription
1 Power, Control & reen olutions Type X Type TX Type F Hadeflex X / TX / F Flexible Couplings EN T +31(0) F +31(0) E info@elsto.eu elsto.eu
2 Flexible Hadeflex -couplings The flexible DECH Hadeflex couplings are claw couplings with flexible elements to provide a torsionally flexible connection for shafts. The flexible elements excel in their wear resistance, their oil, ozone and ageing resistance and their temperature resistance from -20 C to +80 C. Thanks to their flexiblility, impacts, rotary vibrations and noises are effectively absorbed. The flexible elements are dimensioned such that radial, axial and angular movements between the two halves of the coupling are cancelled out. The flexible DECH Hadeflex couplings are of the plug-in type for installation and do not involve any particularly rigorous requirements with respect to alignment accuracy. The balancing quality is, in accordance with DIN-IO 1940, in the quality range 16. DECH Hadeflex couplings can be used in the whole of machine construction wherever a reliable shaft connection is needed between motor and machine. Type X The DECH Hadeflex version X coupling is failsafe up to the fracture moment of the cast iron transmission cam and this provides maximum operational safety. The coupling star can be supplied with hardness 92 hore A and 98 hore A. With the fixed position of the coupling star its deformability in axial direction is free, and so no damaging axial forces can act on the machine bearing even with alternating torque. Type > tandard coupling FW/FNW > tandard coupling XW > Taper-bush type TX Type F The Hadeflex version F coupling is manufactured in two-piece and three-piece variants. With the two-piece coupling (FW series) it is possible to install packages after axial displacement of the drive engines or machines. With the threepiece coupling (FNW series ) it is possible to install packages without axial displacement of the drive engine or machine. Type TX with taper bush The DECH Hadeflex version TX coupling combines the outstanding features of the flexible couplings with the advantages of the taper bush system: fast and easy installation for a torsionally flexible connection between shafts and elimination of shaft balancing errors. The TX version with taper bush has the advantage that even with greater shaft tolerances there is a backlashfree and at the same time axial fixing of the shaft. In addition the close sliding fit makes axial alignment of the coupling easier. The coupling star can be replaced by a simple axial displacement of the coupling halves without having to disassemble the machines connected. --EL-DECH-EN-HADE-001-V01 2 ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu
3 Type TX 03 da s l ize Bush No. min da l s ax. rotational speed max Weight 4) oments of inertia 4) radial max. shaft misalignment 3) axiale angular min -1 kg kgm 2 K r K a K W rad ,26 0,0004 0,3 0,5 0, ,92 0,0020 0,4 1,0 0, ,5 0,0158 0,5 1,0 0, ,9 0,0437 0,6 1,0 0, ,0 0,144 0,7 1,0 0, ,1 0,450 0,9 1,0 0,7 Torque 92 hore A black / 98 hore A red 1) Torsion spring rigidity C dyn / rad ize 92 nominal-t KN 98 nominal-t KN max T KN max changing T KW 2) 92 hore 92 hore 92 hore 92 hore 98 hore 98 hore 98 hore 98 hore 1/4 T KN 1/2 T KN 3/4 T KN 1/1 T KN 1/4 T KN 1/2 T KN 3/4 T KN 1/1 T KN EL-DECH-EN-HADE-001-V ) Torques for shaft fit with keyway 2) aximum alternating torque up to f= 10Hz 3) The values mentioned are valid for 600 rpm and may occur only seperataly. At multiple misalignments or higher speeds the values must be reduced (see page.9) 4) Weight and moments of inertia apply for max. drill holes; coupling half materials: EN-JL-250 (-25) in accord ance with DIN EN ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu 3
4 Taper-bushes with keyway acc. to DIN 6885/1 tolerance J9 Taper-Bush No. Bore ø of available Taper-bushes * * * These bohrholes are with flat keyway DIN 6885/3 Technical data XW1 ize Torque 92 hore A natur/98 hore A blue 1) 92 nominal-t KN 98 nominal-t KN ax T KN max changing T KW 2) Torsion spring rigidity C dyn in / rad 92 hore 92 hore 92 hore 92 hore 98 hore 98 hore 98 hore 98 hore 1/4 T KN 1/2 T KN 3/4 T KN 1/1 T KN 1/4 T KN 1/2 T KN 3/4 T KN 1/1 T KN ize radiale K r ax. shaft misalignment 3) axiale K a angular K w rad 24 0,3 1,2 0,7 28 0,3 1,2 0,7 32 0,3 1,2 0,7 38 0,4 1,5 0,7 42 0,4 1,5 0,7 48 0,4 1,5 0,7 55 0,5 1,8 0,7 60 0,5 1,8 0,7 1) Torques for shaft fit with keyway 2) aximum alternating torque up to f= 10Hz 3) The values mentioned are valid for 600 rpm and may occur only seperataly. At multiple misalignments or higher speeds the values must be reduced (see page.10) ize radiale K r ax. shaft misalignment 3) axiale K a angular K w rad 65 0,5 1,8 0,7 75 0,6 2,1 0,7 85 0,7 2,1 0, ,8 2,4 0, ,9 2,4 0, ,0 3,0 0, ,1 3,0 0, ,2 3,0 0,7 --EL-DECH-EN-HADE-001-V01 4 ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu
5 Type XW1 l2 d1 da s l ize pre. (H7) 1) da d1 l l2 s ax. rotational speed min. max. min -1 Weight 2) kg oments of inertia 2) kgm 2 24* ,55 0, * ,76 0, ,09 0, ,76 0, ,38 0, ,38 0, ,89 0, ,29 0, ,15 0, ,60 0, ,90 0, ,30 0, ,50 0, ,70 0, ,00 0, ,40 1,654 --EL-DECH-EN-HADE-001-V01 1) Drill holes H7 with keyway in accord ance with DIN 6885/1; tolerance zone J9 and set screws on the keyway 2) The information concerning weights and moments of mass inertia apply for max. holes per coupling; coupling half materials: EN-JL-250 (-25) in accordance with DIN EN 1561 ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu 5
6 Allocation to IEC motor XW1 Power P of the IEC motor and allocated Hadeflex couplings X haft ends ize of the tree phase motor 3000 min -1 P Hadeflex kw ize 1500 min -1 P Hadeflex kw ize 1000 min -1 P Hadeflex kw ize 750 min -1 P Hadeflex kw ize Form E DIN 748 part 3 d l at speed approx min min -1 and less , , , , , , , , , , , , , , , , , , , , , , , , ,1 24 0, , , ,5 24 1,1 24 0, , L 2,2 24 1,5 24 1,1 24 0, L ,2 28 1,5 28 0, , ,2 28 1, ,5 38 5, ,2 38 7,5 38 7, , , , L 18, , , L L , , L 355 L 400 L As proposed in the table for surface cooled three-phase motors with cage rotor acc. to DIN 42673, page1 (data for motor 56, 63, 71, 80, 315 L, 355 L, 400 L, see catalogue iemens). This allocation is a preliminary selection for normal conditions of operation. For conditions of operation under shock and changing loads the selection must be made according to the following. (see page.10) --EL-DECH-EN-HADE-001-V01 6 ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu
7 Technical data FW-FNW Torque Perbunan rigidity 80 hore A 1) Torsion spring rigidity C dyn / rad ax. shaft misalignment 3) ize nominal-t KN max T KN max changing T KW 2) 1/4 T KN 1/2 T KN 3/4 T KN 1/1 T KN radiale K r axiale K r angular K w ,3 1 0, ,3 1 0, ,3 3 0, ,4 3 0, ,4 3 0, ,4 3 0, ,5 3 0, ,5 4 0, ,5 4 0,3 9 a ,5 4 0, ,6 5 0,3 10 a ,6 5 0, ,7 5 0, ,8 6 0,3 --EL-DECH-EN-HADE-001-V ,9 6 0, ,0 6 0, ,1 6 0, ,2 6 0,3 1) Torques for shaft fit with keyway 2) aximum alternating torque up to f= 10Hz 3) The values mentioned are valid for 600 rpm and may occur only seperataly. At multiple misalignments or higher speeds the values must be reduced (see page 10). ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu 7
8 Type FW d1 s d1 da l2 l3 l (H7) 1) da d1 l l2 l3 s ax. rotational Weight 2) oments of inertia 2) ize pre. min max min -1 kg kgm ,08 0, ,44 0, ,78 0, ,45 0, ,56 0, ,07 0, ,35 0, ,30 0, ,00 0,191 9 a ,10 0, ,30 0, a ,80 0, ,90 1, ,40 2, ,00 5,43 1) Drill holes H7 with keyway in accordance with DIN 6885/1; tolerance zone J9 and set screws on the keyway 2) The information concerning weights and moments of mass inertia apply for max holes per coupling. ; coupling half materials: EN-JL-250 (-25) in accordance with DIN EN EL-DECH-EN-HADE-001-V01 8 ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu
9 Type FNW d1 s l2 D2 d2 da l3 l4 l (H7) 1) D2 (H7) 1) da d1 d2 l l2 l3 l4 s ax. rotational Weight 2) oments of inertia 2) ize min max min max min -1 kg kgm ,57 0, ,66 0, ,10 0, ,60 0,186 9 a ,50 0, ,00 0, a ,30 0, ,40 1, ,40 2, ,60 5, ,90 9, ,60 15, ,50 27,9 --EL-DECH-EN-HADE-001-V01 1) Drill holes H7 with keyway in accordance with DIN 6885/1; tolerance zone J9 and set screws on the keyway 2) The information concerning weights and moments of mass inertia apply for max holes per coupling. ; coupling half materials: EN-JL-250 (-25) in accordance with DIN EN 1561 ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu 9
10 Allowable misalignments Radial misalignment Axial misalignment Angular misaligment Reduction of the allowable values of misalignment when the combination of misalignments occur or at other rotational speeds: K r / a / w = allowable radial, axial or angular misalignment of the shafts resp. of the couplinghalves W r K r W + a + K a W w K w 1 = Applies to speeds of 600 rpm 0, min -1 0, min -1 0, min -1 W r / a / w = measured radial, axial or angular misalign ment of the shafts resp. of the couplinghalves election The torque of the machine T AN is determind by: P T AN [] = 9550 otor [kw] n [min -1 ] This torque T AN mutiplied by a safty factor depending on the application and the temperature factor T (see table page11) gives the required nominal coupling torque T KN. In case that bigger shock or changing load occur we recoend a revision according to DIN 740. An adequate calculation progra is available. For such a revision the following information is required: 1. Kind of the driving machine 2. Kind of the driven machine 3. Power of driving and driven machines 4. Rotational speed of operation 5. hock loads 6. Exciting loads 7. oments of inertia of load- and driving sides 8. tarts per hour 9. Ambient temperature result: T KN T T AN Design example for IEC standard motors Dates of the plant Driving machine Three-phase motor: 315L Power of the motor: P = 110 kw Rotation at speed: n = 1000 min -1 Driven maschine: ixer Ambient temperature +35 Layout of the coupling T AN = kw 1000 min -1 = 1051 T KN = 1,75 1, = 2207 election XW1 ize 100 flexible spider 92 hore A T KN = 3000 TX 03 ize 90 flexible spider 92 hore A T KN = 2500 FW ize 11 T KN = 2480 FNW ize 11 T KN = EL-DECH-EN-HADE-001-V01 10 ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu
11 afety factors Assignment of load characteristics according to type of working machine DREDER Bucket conveyor Landing gear (caterpillar) Landing gear (rail) anoeuvring winches Pumps Impellers Cutter heads lewing gear ENERATOR, TRANFORER Frequency transformers enerators Welding generators CHEICAL INDUTRY Cooling drums ixers Agitators (liquid material) Agitators (semi-liquid material) Drying drums Centrifuges (light) Centrifuges (heavy OIL INDUTRY Pipeline pumps Rotary drilling equipment CONVEYOR Pit-head winches Winding engines jointed-band conveyors Belt conveyors (bulk material) Belt conveyors (piece goods) Band pocket conveyors Chain conveyors Circular conveyors Load elevators Bucket conveyors for flour Passenger lifts Plate conveyors crew conveyors Ballast elevators Inclined hoists teel belt conveyors Drag chain conveyors BLOWER,VENTILATOR Rotary piston blowers Blowers (axial/radial) Cooling tower fans Induced draught fans Turbo blowers BUILDIN ACHINERY Hoists Concrete mixers Road construction machinery RUBBER ACHINERY Extruders Calenders Kneading mill ixers Rolling mills WOOD WORKIN ACHINE Barkers Planing machines Wood working machines aw frames CRANE Luffing gear block Travelling gear Hoist gear lewing gear Derricking jib gear PLAIC INDUTRY ACHINE Extruders Calenders ixers Crushers ETAL WORKIN ACHINE Plate bending machines Plate straightening machines Haers etal planning machines Presses hears Forging presses Punch presses Countershafts, line shafts achine tools (main drives) achine tools (auxiliary drives) FOOD INDUTRY ACHINERY Bottling and container filling machines Kneading machines ash tubs Packaging machines Cane crushers Cane cutters Cane mills ugar beet cutters ugar beet washing machines PAPER ACHINE Couches lazing cylinders Pulper Pulp grinders Calenders Wet presses Willows uction presses uction rolls Drying cylinders PUP Piston pumps Centrifugal pumps (light liquids) Centrifugal pumps (viscous liquids) Plunger pumps Press pumps TONE AND CLAY WORKIN ACHINE Crusher Rotary ovens Haer mills Ball mills Tube mills Beater mills Brick pressesn TEXTILE ACHINE Batchers Printing and dyeing machines Tanning vats Willows Looms COPREOR Piston compressors Turbo compressors ETAL ROLLIN ILL Plate shears anipulator for turning sheets Ingot pushers Ingot and slabbing-mill train Ingot handling machinery Wire drawing benches Descaling machines Thin plate mills Heavy and medium plate mills Winding machines (strip and wire) Cold rolling mills Chain tractor Billet shears Cooling beds Cross tractor Roller tables (light) Roller tables (heavy) Roller straighteners Tube welding machines Triing shears Cropping shears Continuous casting plant Rollers adjustment drive anipulators LAUNDRIE Tumblers Washing machines WATER TREATENT Aerators crew pumps --EL-DECH-EN-HADE-001-V01 Operating factor Load characteristics of the working machine Driving machines Electric motors, turbines, hydraulic motors 1 1,25 1,75 Piston machines 4 6 cylinders, degree of nonuniformity 1:100 1:200 Piston machines 1-3 cylinders, degree of nonuniformity up to 1:100 1,25 1,5 2 1,5 2 2,5 Temperature factor T ϑ [ C] T 20 < ϑ < , < ϑ < , < ϑ < , < ϑ < ,8 ELTO Drives & Controls Voorhout - roningen - Weert - Hoogerheide T +31(0) E controls@elsto.eu 11
12 Vestigingen elsto.eu Verkoop elektro-mechanische aandrijvingen (motoren, reductoren, lineaire aandrijvingen, componenten) en regelaars. Engineering en productie van speciale aandrijvingen. ELTO Drives Loosterweg TL Voorhout - NL T +31(0) F +31(0) E drives@elsto.eu Engineering en productie van besturingsoplossingen en paneelbouw. Verkoop van frequentieregelaars, servoaandrijvingen en complete besturingen. ELTO Controls Carolus Clusiuslaan RV Voorhout - NL T +31(0) F +31(0) E controls@elsto.eu Regionale verkoop elektro-mechanische aandrijvingen (motoren, reductoren, lineaire aandrijvingen, componenten) en regelaars. pecialist in servo-tandoverbrengingen en koppelingen. ELTO Noord otenburgweg T roningen - NL T +31(0) F +31(0) E noord@elsto.eu Regionale verkoop elektro-mechanische aandrijvingen en regelaars. Reparatie en revisie van alle fabrikaten aandrijfcomponenten. aintenance Repair Overhaul Wikkelen en balanceren van elektromotoren. ELTO ervices Copernicusstraat 9 C 6003 DE Weert - NL T +31(0) F +31(0) E services@elsto.eu aintenance Repair Overhaul Preventief en correctief onderhoud van aandrijvingen in productieomgevingen. Revisie generatorsets. pecialist in ATEX onderhoud. Verkoop elektro-mechanische aandrijvingen en regelaars. TOLK ervices Voltweg R Hoogerheide - NL T +31(0) F +31(0) E info@stolkservices.nl Verkoop in België en Luxemburg van elektro-mechanische aandrijvingen (motoren, reductoren, lineaire aandrijvingen, componenten) en regelaars. Engineering en productie van speciale aandrijvingen. BOEKHOLT Transmissions Postbus Woelgem (Antw.) T +32(0) F +32(0) E info@boekholt.be --EL-DECH-EN-HADE-001-V01
Power, Control & Green Solutions. Pex Couplings. Pex. T +31(0) F +31(0) E elsto.eu
Power, Control & reen olutions Pex Pex Couplings EN T +31(0)88 7865200 F +31(0)88 7865299 E info@elsto.eu elsto.eu Flexible DECH Pex Couplings The flexible DECH Pex couplings are claw couplings with flexible
More informationPower, Control & Green Solutions HRC. HRC Flexible Couplings. T +31(0) F +31(0) E elsto.eu
Power, Control & reen olutions Flexible Couplings EN T +31(0)88 7865200 F +31(0)88 7865299 E info@elsto.eu elsto.eu Flexible -couplings Flexible -couplings The flexible DECH coupling is a breakthrough
More informationPOWER TRANSMISSION FLEXIBLE COUPLINGS HADEFLEX X / TX / F HADEFLEX
POWER TRANIION FLEXIBLE COUPLIN X / TX / F 2 FLEXIBLE COUPLIN The flexible Hadeflex couplings are claw couplings with a flexible element to provide a torsionally flexible connection for shafts. The flexible
More informationDESCH Hadeflex X / TX / F
mart Drive olutions DECH Hadeflex X / TX / F Flexible Couplings HX 11 B mart Drive olutions Flexible Hadeflex -couplings The flexible DECH Hadeflex couplings are claw couplings with flexible elements to
More informationPOWER TRANSMISSION FLEXIBLE COUPLINGS FLEX FLEX
POWER TRANIION IBLE COUPLIN 2 IBLE COUPLIN IBLE COUPLIN The Flex coupling combines all the advantages which can be expected of an ideal flexible coupling. It is a torsional flexible coupling which offers
More informationPOWER TRANSMISSION RIGID COUPLINGS
POWER TRANIION RIID COUPLIN C C-ECO C 2 EAR COUPLIN C / C-ECO RIID COUPLIN C ear couplings C are flexible shaft connections suitable for a positive torque transmission. They ensure to compensate radial,
More informationCOMPACT CATALOGUE COUPLINGS
COPACT CATALOUE COUPLIN Tecnamic mbh & Co. K COPACT CATALOUE COUPLIN 3 et things moving in a big way with the right drive. Norbert, 42, Foreman Tecnamic is your partner for industrial applications in drives,
More informationDESCH Flex. Flexible Couplings DF 12 - GB
DECH Flex Flexible Couplings DF 12 - B Flexible DECH Flex-couplings DECH Flex shaft couplings The DECH Flex coupling combines all the advantages which can be expected of an ideal flexible coupling. Additionally
More informationDESCH GC. Gear Coupling GC 14 - GB
DECH C ear Coupling C 14 - B DECH ear Couplings C ear Couplings C DECH gear couplings C are flexible shaft connections suitable for a positive torque transmission. They ensure to compensate radial, axial
More informationDESCH Habix HWN / HWT Flexible Couplings
DECH Habix HWN / HWT Flexible Couplings HW B Flexible Habix couplings Flexible Habix couplings Type HWN The flexible DECH Habix coupling, type HWN, is a distorsionfree jaw coupling with a flexible element
More informationDESCH Conax Clutches. Type CM - mechanically actuated Type CR - slipping clutches CM 11 - GB
DECH Conax Clutches Type C - mechanically actuated Type CR - slipping clutches C 11 - B Conax Friction Clutches Fig. 1 Conax Friction Clutch Type C Conax Friction Clutch Type C The characteristic feature
More informationFLEXING COUPLING Type N-EUPEX
www.motor-pump-ventilation.com FLEXING COUPLING Type N-EUPEX Manual 1 Flexing Coupling The fail safe N-EUPEX coupling Pin coupling wich upon failure of flexible elements makes emergency torque transmission
More informationDESCH Planox - PM. Mechanically actuated clutches PM 19 GB
DECH Planox P echanically actuated clutches P 19 B Planox P clutches Fig. 1 Type P DECH Planox clutches are engageable/disengageable dryfriction clutches which transmit the torque by friction. These clutches
More informationDESCH Planox - PM. Clutches mechanically actuated PM 13 - GB
DECH Planox P Clutches mechanically actuated P 13 B Planox Friction Clutches DECH Planox clutches are engageable/ disengageable dryfriction clutches which transmit the torque by friction. These clutches
More informationDESCH Planox - PP. Clutches pneumatically actuated PP 18 GB
DECH Planox - PP Clutches pneumatically actuated PP 18 B Planox friction clutches DECH Planox -clutches are dry running, hydraulically or pneumatically actuated friction clutches. These clutches permit
More informationFlexible Couplings MD /
D 10.12 2006/2007 www.ad.siemens.com.cn Flender Couplings D 10.12 2006/2007 Catalog D 10.12 2006/2007 ummary of Basic Types Basic Principle Characteristic Features 2 3 Design and Operation election of
More informationw h e n f u l l p o w e r i s n e e d e d DESCH Planox - PP Friction Clutches pneumatically actuated Technology PP 09 - GB
DECH Planox - PP Friction Clutches pneumatically actuated Technology PP 09 - B Planox - Friction Clutches Fig. 1 Type PPW Pneumatically switchable DECH Planox -friction clutches are engageable resp. disengageable
More informationGearbox standard series Your industrial Gearboxes. Standard Industrial NH/NHK
www.gamesagearbox.com Standard Industrial 1 Contents Gear Design and Construction 3 Service Factors 5 Example of Selection 7 Spur Gearboxes NH I 8 NH II, NHS II, NHZ I2 NH III, NHS III, NHZ II7 NH IV,
More informationU-DISC 6-BOLT UNITIZED SPACER DISC COUPLING
U-DISC 6-BOLT UNITIZED SPACER DISC COUPLING THE U-DISC 6-BOLT UNITIZED SPACER DISC COUPLING Same Day Shipping Stocked in Two Convenient Locations Simple 3-Piece Spacer Disc Coupling Factory Pre-Assembled
More informationMETALDRIVE Disc Couplings
ETADRIVE Disc Couplings ETADRIVE ETADRIVE disc couplings ETADRIVE couplings are fully made of steel and are used in all applications where high reliability, precision, and no maintenance are required.
More informationMETALDRIVE Disc couplings
ETADRIVE Disc couplings ETADRIVE couplings are fully made of steel and are used in all applications where high reliability, precision and no maintenance are required. Features All steel made Superior disc
More informationMETALDRIVE Disc Couplings METALDRIVE
ETADRIVE Disc Couplings ETADRIVE Contents ETADRIVE Disc Couplings age Features 83 ETADRIVE disc coupling executions 84 Technical characteristics 85 GD type S 86 GD type DC 87 GD type SA1 - SA2 88 GD type
More informationMULTI MONT - SELLA - DEKA - GIGANT
ULTI ONT - SELLA - DEKA - GIGANT Torsionally flexible claw couplings EN ISO 900:2000 Certified Company Your drive is our strength. Your strength is our drive. Contents Page General... 3 Standard types...
More informationPower Transmission Products. Maurey Couplings. Hi-Flex Tire Couplings Hi-Q Jaw Couplings Finished Bore Sleeve Couplings Rigid Bushed Sleeve Couplings
Power Transmission Products Maurey Couplings Hi-Flex Tire Couplings Hi-Q Jaw Couplings Finished Bore Sleeve Couplings Rigid Bushed Sleeve Couplings Hi-Q Flexible Couplings R to enable full power transmission
More informationTechnical Features. H i g h L o a d i n g A b i l i t y. Tr a n s m i s s i o n M e t h o d. E f f i c i e n c y. Te c h n i c a l B e n e f i t s
HM HS HV HW HRM SH Technical Features H i g h L o a d i n g A b i l i t y Every of module consists an internal ar meshing with 3 planetary ars, mounted on the planet carrier: these also enga with the sun
More informationUnique Tyre Type Flexible Cushion Couplings
Unique Tyre Type lexible Cushion Couplings Highly flexible & resilient Absorbs arge isalignment ow Torsional Stiffness Dampens shock & Vibration lexible element easily replaceable insitu Ideally suitable
More informationMULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings
MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959
More information(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores.
Fenaflex Couplings The Fenaflex coupling is a highly flexible, torsionally elastic coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.
More informationM.H INDUSTRIAL EQUIPMENTS
M.H INDUSTRIAL EQUIPMENTS Tyre Flexible Cushion Coupling Highly flexible & resilient Absorbs Large Misalignment Low Torsional Stiffness Dampens shock & Vibration Flexible element easily replaceable insitu
More informationGear Coupling. Applications
Gear Coupling Applications Power Transformation Print & Paper Industries Gear Boxes Textile Industries Conveyors Pumps Compressors Process, Chemical & Pharmaceutical Industries Nylon Gear Couplings Nylon
More informationRIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at
117 Table of contents 117 Coupling selection steel laminae coupling 119 Description of coupling 121 General information 122 Types and applications 123 Technical data 124 Standard types 126 Special types
More informationTorsionally Stiff Steel Lamina Couplings. innovative quality products. optimal cost-performance ratio. certified according to DIN ISO 9001
RGFLEX Torsionally Stiff Steel Lamina Couplings features: innovative quality products large-scale service optimal cost-performance ratio certified according to DN SO 0 worldwide net of distribution www.ktr.com
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationSeries F Shaft Mounted Helical
Series F Shaft ounted Helical Technical Up to - 110 kw / 16,500 Nm Geared otors CF-2.01GB1 ATEX Compliance Assured Total compliance with the ATEX Directive safeguarding the use of industrial equipment
More informationCrossflex Disc Couplings
Crossflex Disc flexible shaft couplings provide reliable and accurate transmission of mechanical power for applications requiring low maintenance and no lubrication. The couplings are particularly suited
More informationShaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Tru-Line Flange-Couplings
More informationShaft Couplings. Edition 2015/2016. Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Tru-Line Flange-Couplings
More informationFlexible Couplings 44
Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact
More informationJaw In-Shear Type JIS JIS-1
-1 Overview 6 Pin Saves Great Amounts Of Time, Maintenance, And Inventory Costs Lovejoy s commitment to continual product improvement is demonstrated in the next generation of the Jaw In-Shear () coupling
More informationLamidisc Steel Disc coupling
Lamidisc teel Disc coupling JAURE. Experience, innovation and close cooperation with leading international companies. 2 JAURE is a leading supplier of couplings and power transmission solutions. Experience,
More informationGEAR-COUPLINGS. Series LX GLX S-NX
GEAR-COUPLINGS Series LX GLX S-NX CONTENTS Application 3 Quality and production 3 Design and characteristics 3 selection 4-5 Key connections 6 Shrink-fit connections 7 Standard design with one-piece housing
More informationPRODUCT MANUAL B-FLEX COUPLING
RATHI TRANSPOWER PVT. LTD. PUNE - INDIA PRODUCT MANUAL B-FLEX COUPLING R-PM-B-01/02-01/14 Page 1 INDEX CONTENTS PAGE Features of B-FLEX Coupling 3 At a glance 3 Components of B-FLEX Coupling 3 How B-FLEX
More informationFull disengagement ROBUST AND COMPACT TORQUE LIMITERS. THE ULTIMATE COUPLING FROM 1, ,000 Nm.
ROBUST AND COMPACT Full disengagement TORQUE LIMITERS SERIES ST 1,000 160,000 Nm THE ULTIMATE COUPLING FROM 1,000 160,000 Nm Full disengagement SERIES ST TORQUE LIMITERS Areas of application for the ST
More informationSeries P Planetary. Technical Up to - 90kW / 65000Nm. Planetary CP-2.00GB0 1
VARIMAX AG, Antriebstechnik, Normannenstrasse 14, Postfach 762, CH-3018 Bern Tel. +41 (0)31 990 00 70 e-mail info@varimax.ch Fax +41 (0)31 990 00 71 web www.varimax.ch Series P Planetary Technical Up to
More information4 Fenner Torque Drive Plus 3
Fenner Torque Drive Plus 3 offers; State of the art power ratings. Compact drive package - reduced weight. Quiet operation. Accuracy of positioning. Anti-static as standard. Runs on standard HTD pulleys.
More informationJaw Couplings REK DCO
elastic for dynamic applications with curved jaws Features Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive torsion spring properties due to primarily pressurised
More informationFlexible Couplings N-EUPEX Series
Flexible Couplings N-EUPEX eries /2 Overview /3 Benefits /3 Application /3 Function /4 Design / Technical data /10 Type A for easy elastomer flexible replacement /10 election and ordering data /11 Type
More informationFlexible Jaw Couplings
Flexible Jaw Martin Offers The Martin Universal Completely Interchangeable No Lubrication asy Installation No Metal to Metal Contact asy inspection of load carrying Spider Flexibility of angular or parallel
More informationCoupling description. Disc pack with bolts
Coupling description RADEX -N couplings are designed to transmit torque between drive and driven components via steel hubs and flexible metallic elements commonly known as discs. The combination of these
More informationSeries C Helical Worm
Series C Helical Worm Technical p to - 45 Kw / 10,000 Nm Geared otors CC-2.01GB0914 PRODCTS IN THE RANGE Series A Worm Gear units and geared motors in single & double reduction types Series BD Screwjack
More informationSpecialty Couplings. Overview. Deltaflex Coupling Design Lovejoy offers maximum misalignment capacity with the Deltaflex coupling! SP-3.
Overview Deltaflex Coupling Design Lovejoy offers maximum misalignment capacity with the Deltaflex coupling! The Deltaflex coupling is the real solution to installation, misalignment, and performance problems.
More informationINDUSTRIAL DRIVE COUPLINGS FOR THE MOST DEMANDING POWER TRANSMISSION APPLICATIONS.
RELIABLE COMPACT ROBUST INDUSTRIAL DRIVE COUPLINGS FOR THE MOST DEMANDING POWER TRANSMISSION APPLICATIONS. RW-AMERICA.COM THE COUPLING. WHO WE ARE. ABOVE ALL R+W IS: THE PERFECT COUPLING. When R+W Antriebselemente
More informationSYNCHRONOUS BELT DRIVES SYNCHRONOUS BELT DRIVES
Section SYNCHRONOUS BELT DRIVES This state of the art, integrated r a ng e o f s y n c h ro n o u s b e l t drive components is capable of meeting almost any applicational requirement. Comprehensive range
More informationPRODUCT MANUAL TYRE-FLEX COUPLING (T,TO & RST)
RATHI TRANSPOWER PVT. LTD. PUNE - INDIA PRODUCT MANUAL TYRE-FLEX COUPLING (T,TO & RST) R-PM-T-1/3-1/14 Page 1 INDEX CONTENTS PAGE Standard Features 3 At a Glance 3 TYRE-FLEX Family 3 Elastomer Information
More informationSize 1120, Bore Ø0.75" Size 1320, Bore Ø1.25" Size 1420, Bore Ø1.375" 3/4HP. Size 1320, Bore Ø1.25" Size 1320, Bore Ø1.25" Size 1633, Bore Ø2.
Product Range Hollow Shaft Type Selections shaded in blue offer an increased service factor. Please refer to the gearmotor selection tables for specific unit service factor details. Nominal Ratio (:1)
More informationOperating since 1981 installed in the city of Jaboticabal, Sao Paulo State, Brazil, Henfel
Operating since 1981 installed in the city of Jaboticabal, Sao Paulo State, Brazil, Henfel Indústria Metalúrgica Ltda manufactures Bearing Housings, Hydrodynamic Couplings, Variable Speed Hydrodynamic
More informationPOLY V TAPER-LOCK PULLEYS
POLY V TAPER-LOCK PULLEYS Types Grooved pulleys designed for industrial transmissions are identified by reference to the dimensions and the groove pitch in the following types: PPV-J PPV-L Profile dimensions
More informationTyreflex Couplings.
Tyreflex Couplings trength through ervice Renold Gears has been manufacturing high quality, high specification gear units for over 100 years and has always been at the leading edge of gear technology with
More informationSYNCHRONOUS BELT DRIVES
Back to Contents TORQUE DRIVE PLUS 2 DRIVES NEW GENERATION TDP 2 BELTS LOW NOISE, MINIMUM BACKLASH, HIGH POWER DRIVE BELTS BELT RANGE DRIVE DESIGN PAGE 164 This state of the art, integrated range of synchronous
More informationDESCH Mini. Torsionally rigid couplings WV 11 - GB
DESCH Mini Torsionally rigid couplings WV 11 - GB Shaft connector type DESCH Mini-clutch Features The DESCH Mini-coupling is a float-free, torsion proof, bending elastic and, above all, maintenance free
More informationFLENDER Standard Couplings
FLENDER Standard Couplings N-BIPEX FLENDER couplings Catalog MD 10.1 N Edition October 2016 Related catalogs ARPEX MD 10.2 High Performance Couplings Bucket Elevator Drives MD 20.2 E86060-K5710-A121-A1-7600
More informationTRASCO couplings. Description
TRCO couplings Description TRCO flexible coupling is the flexible and omocinetic coupling that assures the best performance in relation to the physical space occupied in its class. t has a very compact
More informationHELIMAX. Parallel/Orthogonal Gear Units with Ground Helical Gear. Bipartite housing. Monobloc housing. 1 Stage
HELIAX Parallel/Orthogonal Gear Units with Ground Helical Gear Bipartite housing onobloc housing 1 Stage www.wegcestari.com Index Description Page General characteristics 2 Product designation 3-5 Selection
More informationDescription Symbol Definition or explanation Rated torque T KN Torque that can continuously be transmitted over the entire permissible speed range
Coupling selection Normally the is selected according to the nominal torque ( ) shown in the list of technical data, like all other coupling systems. In all cases the torque ( ) must exceed the maximum
More informationDescription. General characteristics 2. Product Code 3-5. Selection of gear-unit 6-7. Service factors 8-9
www.wegcestari.com Index Description Page General characteristics 2 Product Code 3-5 Selection of gear-unit 6-7 Service factors 8-9 Radial forces / Permissible Radial orce -12 Output- torque 13 echanical
More informationSection 4: Synchronous Belt Drives
SYNCHRONOUS BELT DRIVES SECTION : 4 Section 4: Synchronous Drives Offering high power transmission combined with accurate positioning in a compact drive envelope, Fenner synchronous drives continue to
More informationSpeed Reducers and Gearmotors
and Gearmotors Table of Contents 1. General Information 2. How to Select...2.2 Configure a Model Number (Nomenclature)...2.4 AGMA Load Classifications...2.6...2.8 Single Reduction,,, Y3, Y5,...2.8 Single
More informationL-Jaw Elastomeric Couplings
L-Jaw Elastomeric Couplings F3 100% interchangeable with industry standard 3 Insert materials available 3 Hub materials available Large selection of sizes P-1686-TBW 4/16... TB Wood s 888-829-6637 F3-1
More information24 Sizes of entire steel coupling from to Nm.
Fasteners class 12.9 allow torque transmission by adhesion. Special gear teeth realized in order to increase the contact surface and to limit the superficial pressure. Tightness with standard o-rings that
More informationJaw Couplings REK DQO
Jaw s REK DQO elastic for dynamic applications with radially mountable elastomer cushions 40-1 Features s up to 169 000 Nm Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive
More informationSection 9: Gearboxes: Series F
GEARBOXES Section 9: Gearboxes: Series F The new Fenner Series F geared motor range is primarily designed as a compact shaft mounted unit incorporating an integral torque reaction bracket. ew range now
More informationCatalog April Metric Motorized Torque-Arm II Technical catalog
Catalog April 2015 Metric Motorized Torque-Arm II Technical catalog With expertise, and a comprehensive portfolio of products and life-cycle services, we help value-minded industrial customers improve
More informationLamidisc all steel coupling
IO 9001 (J-130 MI) ACCREDITED BY CERTIFICATED FIRM couplings amidisc all steel coupling JAURE has been engaged more than 35 years in the development and production of couplings that are used in a variety
More informationUniversal Joints. In This Section: D Type HD Type D Type Stainless NB (Needle Bearing) Type LOJ Type DD and DDX Type Universal Joint Boots
JW Universal Joints In This Section: D Type HD Type D Type Stainless NB (Needle Bearing) Type LOJ Type DD and DDX Type Universal Joint Boots www.lovejoy-inc.com 329-1 JW Universal Joints Safety Warning
More informationelsto.eu Merkur Type1 and Type2 Merkur Type1 Type2 Installation, Operation and Maintenance Manual Green Solutions Power, Control &
Power, Control & Green Solutions Merkur Type1 Type2 Merkur Type1 and Type2 Installation, Operation and Maintenance Manual English T +31(0)88 7865200 F +31(0)88 7865299 E info@elsto.eu elsto.eu Table of
More informationGEARED TO EXCEL SMSR GEAR BOX PLUMMER BLOCK HELICAL GEAR PUMP V BELT PULLEY
www.nisukaindustries.com GEARED TO EXCEL SMSR GEAR BOX PLUMMER BLOCK HELICAL GEAR PUMP V BELT PULLEY COMPANY PROFILE The Industries Private Limited was established in 994 for manufacturing High Quality
More informationThe Design of Rolling Bearing Mountings PDF 1/8: Contents. Rolling Bearings
The Design of Rolling Bearing Mountings 1/8: Contents Rolling Bearings FAG OEM und Handel AG Publ. No. WL 00 200/5 EA The Design of Rolling Bearing Mountings Design Examples covering Machines, Vehicles
More informationShaft Mounted Speed Reducer Selection
GEARBOX SELECTION PROCEDURE (a) Service Factor From Table 1 select the service factor applicable to the drive. (b) Design Power Multiply the absorbed power (or motor power if absorbed power not known)
More informationFlexible Couplings N-BIPEX Series
Flexible Couplings Series /2 Overview /2 Benefits /2 Application /3 Function /3 Design /4 Technical specifications /6 Type BWN /6 Selection and ordering data /7 Spare and wear parts /7 Selection and ordering
More informationFlange Flexible Couplings.
Flange Flexible Couplings Coupling Selection Coupling Selection How to Select Standard Selection The Standard Selection may be used for engine driven, motor, or turbine applications. The following information
More informationPremium Flexible Drive Couplings
Premium Flexible Drive Couplings agnaloy is the original lightweight, heavy-duty flexible drive coupling. Light weight magnesium construction makes agnaloy couplings 76% lighter than cast iron and 36%
More informationFLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores
Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):
More informationSibre All Steel Couplings
Overview Coupling is device to transmit torque from driving side to driven side and also has function of compensation of axial,radial,angular misalignment which generated by manufacturing, installation
More informationCouplings. Resilient and Soft Start Couplings. 7th Edition
Couplings Resilient and oft tart Couplings 7th Edition Clutches & Couplings Wentloog Corporate Park, Newlands Road, Cardiff CF3 2EU Wales Tel: +44 (0) 29 20792737 Fax: +44 (0) 29 20793004 (ales): +44 (0)
More informationPOWER TRANSMISSION RIGID COUPLINGS MINI MINI
POWER TRANSMISSION RIGID COUPLINGS 2 RIGID COUPLINGS FEATURES The Mini coupling is a backlash-free, torsion proof, bending elastic and, above all, maintenance-free steel coupling made in one piece. It
More informationSHAFT MOUNTED HELICAL GEAR REDUCER
Shaft Mounted Helical Gear Assembly INTRODUCTION The VIGNESSH Shaft Mounted Helical Gear Units are the result of experience in design and production, taking advantage of the most recent relevent research
More informationQT Power Chain Sprockets & Belts
QT Power Chain Sprockets & Belts C2 Requires little retensioning Abrasion resistant Less drive maintenance P-1686-TBW 3/18... TB Wood s 888-829-6637 C2-1 QT Power Chain Sprocket 8M Dimensions SPROCKET
More informationJaw Type JW JW-1. Polígono Indutrial O Rebullón s/n Mos - España -
-1 Overview Couplings USA Standard Elastomer-in-Compression The couplings from Lovejoy are offered in the industry s largest variety of stock bore/keyway combinations. These couplings require no lubrication
More informationSpecifications. Trantorque GT CALL FAX
GT Specifications The following pages contain engineering data and product specifications for GT. For CAD drawings of GT, please click on the part number to download the drawing. All drawings are in AutoCAD
More informationflexident senior 1275 Newton, local 15 Boucherville, Qc, Canada, J4B 5H2 (450)
flexident senior (450) 655-7447 Fasteners class 12.9 allow torque transmission by friction. Special gear teeth realized in order to increase the contact surface and to limit the superficial pressure. Tightness
More informationNEXT LEVEL INFORMATION DISCOVER THE FUTURE TODAY
AUGEMENTED REALITY APP NEXT LEVEL INFORMATION DISCOVER THE FUTURE TODAY The R+W app blurs the borders between the real and virtual worlds. Thanks to Augmented Reality technology, you can experience the
More informationRibbed Belts FRICTION BELT DRIVES FRICTION BELT DRIVES. Drive Design & Maintenance Manual
BELT DIMENSIONS & PHYSICAL PROPERTIES Belt Section PJ PK PL PM Rib pitch E (mm) 2.4.56 4.70 9.40 Belt thickness H (mm).50 5.00 7.00 12.00 Mass/unit length/rib (g/m/rib) 8.20 19.50 2.00 110.00 Maximum belt*
More informationSection 9: Gearboxes: Series K
GEARBOXES Section : 9 Section 9: Gearboxes: Series K The Fenner Series K incorporates all the core design features in a highly efficient yet flexible bevel helical drive. Drives up to 90 Highly efficient
More informationPower, Control & Green Solutions. S series. S series. Spare parts list. English. T +31(0) F +31(0) E elsto.
Power, Control & Green Solutions S series S series Spare parts list English T +31(0)88 7865200 F +31(0)88 7865299 E info@elsto.eu elsto.eu 2 Quadro d'unione delle tavole parti di ricambio Index of spare
More informationJaw. In This Section:
Jaw In This Section: L Type LC Type Al Type - Aluminum SS Type - Stainless RRS and RRSC Types - Spacer C and H Type - Medium / Heavy Duty RRC Type - Spacer www.lovejoy-inc.com 13-1 Jaw Safety Warning When
More informationTypes and operating description
22 Flexible jaw and pin & bush couplings 24 69 70 71 72 Selection of standard IEC motors Type PKZ, two-part and PKD, three-part Type PKA, drop-out center design coupling Displacements / elastomer sets
More informationFLEXIBLE JAW COUPLINGS
To order this part, call Lifco Hydraulics USA Toll Free at -800-92-849 Jaw Type Couplings USA Standard The Jaw Type Couplings from Vescor are offered in the industry s largest variety of stock bore/keyway
More informationDRIVE COUPLINGS DRIVE COUPLINGS
DRIVE COUPLINGS Fenner shaft couplings range from highly resilient to totally rigid and are all precision manufactured using high quality ferrous materials and the latest polymer technology. Fenaflex tyre
More informationBoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions
1 of 17 is a torsionally rigid flange coupling. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc. BoWex FLE-PA BoWex FLE-PAC Drawn:
More informationTOOLFLEX Operating-/Assembly Instructions
D-807 Rheine heet: 5810 EN 1 of 19 Backlash-free, torsionally stiff and maintenance-free coupling is a backlash-free, torsionally stiff and maintenance-free metal bellow-type coupling designed to be used
More information