Shaft Couplings. Edition 2015/2016. Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Size: px
Start display at page:

Download "Shaft Couplings. Edition 2015/2016. Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings"

Transcription

1 Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg

2 2

3 Table of Contents Tru-Line Flange-Couplings Page Tru-Line Flange-Couplings RFK with backlash free cone-clamping-connections 4 Rigid Shaft Couplings Page Rigid Shaft Couplings RWK 500 for backlash free connection of two shaft ends 6 Flexible Couplings Page Flexible Couplings L 8 Flexible Couplings L Hubs with keyways 10 Flexible Couplings LK Hubs with backlash free clamping connections 11 Flexible Couplings LF Flange connection 12 Flexible Couplings LA Flange connection and hubs with keyway 13 Shaft Couplings technology details Page Questionnaire for RINGSPANN Tru-Line Flange-Couplings RFK 14 RFK RWK L LK LF LA Issue 09/ We reserve the right to make technical modifications. 3

4 Tru-Line Flange-Couplings RFK with backlash free cone-clamping-connections Features Compact design Small axial space required for installation Fast disassembly for minimal downtime High shaft tolerance h8 permissible No weakening of shafts by feather keys No fretting corrosion as with keyway connections Proven solution in many applications, particularly in mining 4-1 Applications A rigid and easy to disassemble shaft coupling solution for: Conveyor belts Elevators Bucket elevators Escalators and moving walkways Many other applications Application Tru-Line Flange-Couplings RFK are particularly suitable for coupling freely suspended motor gear units on a rocker with a torque support. However, they can neither compensate radialangle nor axial shaft misalignments. If this is required, then please use the Flexible Couplings L described from page 8 onwards. Tru-Line Flange-Coupling RFK 350 F M connects the gear of the drive unit to the head drum of an iron ore conveyor belt system in South Africa 4-2 Transmissible torques The transmissible torques listed on page 5 are subject to the following tolerances, surface characteristics and material requirements. Please contact us in the case of deviations. Tolerances h8 for shaft diameter d h8 for shaft diameters d F or d M Surfaces Average surface roughnesses at the contact surfaces of the shafts R z = µm. Materials We will be happy to recoend suitable shaft materials taking DIN 743 as a basis (12/2012 edition). In doing so we will take the surface pressures prescribed for the Tru-Line Flange- Couplings RFK into account. Simultaneous transmission of torque, axial force and bending moment Where there are axial forces and/or bending moments in the application in addition to the torque M A, the transmissible torque is reduced compared to the values for M as listed in the tables. We will select the proper coupling for each application based upon the allowed transmissible torque under existing bending moment conditions. Our selection calculations are in accordance with the latest scientific knowledge and know how in the industry and include the proper safety factor to prevent fretting corrosion. Please contact us. 4

5 Tru-Line Flange-Couplings RFK with backlash free cone-clamping-connections N F F F M G + 5 H M G Y ø K R Z H F ø B ø d F h8 L ø C F7 ø T ø D ø C -0,01-0,032 ø d M h8 Inside-centred Coupling Half Outside-centred Coupling Half 5-1 Tru-Line Flange- Coupling RFK Size Coupling Half insidecentred outsidecentred 50 F 50 M 70 F 70 M 90 F 90 M 115 F 115 M 140 F 140 M 170 F 170 M 210 F 210 M 211 F 211 M 250 F 250 M 270 F 270 M 290 F 290 M 320 F 320 M 350 F 350 M Shaft d F or d M min. 25 max. 50 min. 50 max. 70 min. 70 max. 90 min. 95 max. 115 min. 115 max. 140 min. 140 max. 170 min. 170 max. 210 min. 170 max. 210 min. 210 max. 250 min. 250 max. 270 min. 270 max. 290 min. 290 max. 320 min. 320 max. 350 transmissible torque B C D F F F M G H F H M K L N R T Connection screws Clamping screws Weight M Nm x M 10 x x M x M 14 x x M x M 16 x x M x M 24 x x M x M 24 x x M x M 30 x x M x M 30 x x M x M 30 x x M x M 30 x x M x M 30 x x M x M 30 x x M x M 30 x x M x M 30 x x M Paired coupling halves of the same color can be interchanged due to matching flange patterns. The maximum torques of the smaller coupling half apply. * Number of connection screws Y in accordance DIN EN ISO 4014 property class 10.9 or 12.9 for RFK 50 on pitch circle T. Tightening torque Y* Z Nm Tightening torque Nm kg 7,5 6, Example for ordering Tru-Line Flange-Coupling RFK with inside-centred coupling half for shaft diameter 210 and outside-centred coupling half for shaft diameter 140 : RFK 210 F M, d F = 210, d M = 140 Mounting Please request our installation and operating instructions for Tru-Line Flange-Couplings RFK. 5

6 Rigid Shaft Couplings RWK 500 for backlash free connection of two shaft ends Features Compact design Easy to release For shaft diameters between 14 and 100 Rigid and backlash free connection of shaft ends No weakening of shafts by feather keys No fretting corrosion as with keyway connections Transmission of torques and axial forces 6-1 Application example Simple and cost-effective connection of two shaft ends with a Rigid Shaft Coupling RWK 500. Shaft coupling RWK 500 (for smaller torques and larger axial mounting distances) is particularly suitable for coupling freely suspended motor gear units on a rocker with a torque support. However, they can neither compensate radialangle nor axial shaft misalignments. If this is required, then please use the Flexible Couplings L described from page 8 onwards. 6-2 Transmissible torques and axial forces The transmissible torques and axial forces listed on page 7 are subject to the following toler - ances, surface characteristics and material requirements. Please contact us in the case of deviations. Tolerances h8 for shaft diameter d Surfaces Average surface roughnesses at the contact surfaces of the shafts R z = µm. Materials The following apply to the shaft and the hub: E-module 170 kn/ 2 Simultaneous transmission of torque and axial force The transmissible torques M which are shown in the tables apply for axial forces F = 0 kn and con versely, the indicated axial forces F apply to torques M = 0 Nm. If torque and axial force are to be transmitted simultaneously, the transmissible torque and the transmissible axial force are reduced. Formula symbols M = transmissible torque according to table [Nm] M A = Maximum actual application torque [Nm] M red = Reduced torque [Nm] For a given axial force F A, the reduced torque M red is calculated as: ßßßßßß M red =! M 2 d - (F A ) 2 2 For a given torque M A, the reduced axial force F red is calculated as: F red = 2 d! ßßßß M 2 - M 2 A F A = Maximum actual application axial force [kn] F red = Reduced axial force [kn] d = Shaft diameter [] 6

7 Rigid Shaft Couplings RWK 500 for backlash free connection of two shaft ends B L 2 L 1 L 1 ø D ø d ø d h Size d transmissible torque or axial force M Nm F kn Clamping screws D B L 1 L 2 Weight Tightening torque Number Size Length M S Nm kg M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M , M ,00 Bending moments Where there are bending moments in the application in addition to the torque M A or the axial force F A, the transmissible torque or transmissible axial force is reduced compared to the values for M or F as listed in the tables. Please contact us. Example for ordering Rigid Shaft Coupling RWK 500 for shaft diameter d = 50 : RWK 500, d = 50 Mounting Please request our installation and operating instructions for Rigid Shaft Coupling RWK

8 Flexible Couplings L Features Compact design Small dimensions Electrical insulation No stick-slip action Large radial shaft misalignment permissible For angular misalignments of up to 3 Torsionally rigid Minimal restoring forces on adjacent machine parts 8-1 with keyway with clamping hub with flange connection with keyway with clamping hub with flange connection Configuration The RINGSPANN Flexible Couplings are based on the proven Oldham principle. They consist of a flexible disc made of highly wear-resistant plastic resin and two coupling halves made of steel or spherical graphite iron. Different coupling solutions can be achieved by combining different coupling halves (see Fig. 8-2). The robust design of only three basic elements guarantees excellent reliability and easy mounting. The driving dogs of the two hubs engage by sliding into corresponding slots of the flexible disc, the slots being offset by 90, thereby compensating very large parallel misalign - ments of the shafts, if necessary. Furthermore, the support dogs - offset by 90 to the driving dogs - can compensate angular misalignments of up to 3. The rotation movement is always transmitted angle true. The particularly large, low-stress transmission surfaces are not subject to any elastic distortion or play and therefore no fatigue. Driving dogs and flexible disc should be greased with graphite paste or molybdenum disulphide as recoended in the operating instructions. This is not necessary if the couplings run in oil. Care must be taken that the Flexible Couplings are not affected by undue axial forces caused, for example, by heat expansion of the shafts. If necessary, the coupling has to be mounted with axial tolerance between support dogs and flexible disc. Possible combinations of different coupling halves 8-2 8

9 Flexible Couplings L Selecting the size of the Flexible Coupling The size of the Flexible Coupling is selected on the basis of the maximum load torque according to the familiar formula: M L = 9550 P/n [Nm] In this formula: M L = Load torque of driven machine [Nm] P = Power required for driving the machine, which is in most cases lower than the nominal power of the motor [kw] n = Coupling speed [min -1 ] The load torque requirement M L calculated according to this formula is an average value, but in reality the transmitted torque M through the coupling is irregular, according to the irregular - ity of the driving power and the machine. The maximum peak torque of the drive, the selection torque M A, should be lower than the transmissible torque M of the selected coupling according to the table. M A < M Where the precise irregularities of the torque, thus the selection torque M A are not known a service factor f should be applied: M A = 9550 P/n f [Nm] This factor f is dependant on the type of drive and type of driven machine, refer to table below. In this formula: M A = Selection torque [Nm] f = Service factor Service factor f Type of driven machine Driven by Belt drives, electric motors Combustion engines 4 and 6 cylinders Combustion engines 2 and 3 cylinders, single cylinder, steam engines Single cylinder combustion engines Belt drives, small generators, small ventilators, rotary blowers 1,5 1,7 1,9 2,2 Small hoists, larger ventilators, light machines for metal, wood and textile, small conveyors 1,8 2,0 2,2 2,5 Hoists for heavy loads, heavier conveyors, hanging conveyors, mixers, textile machines with high inertias 2,0 2,2 2,4 2,7 Presses, sheers, stumping machines, reciprocating pumps, calendars, pan grinders, haer mills 2,5 2,7 2,9 3,2 Welding generators, stone crushers, pinch roll drives, reciprocating compressors and reciprocating pumps without flywheels, rolling mills 3,0 3,2 3,4 3,7 9

10 Flexible Couplings L Hubs with keyways with keyway with keyway 10-1 Technical Data and Dimensions Coupling size torque M Nm speed min -1 Inertia J kgm 2 parallel misalign - ment L ,0001 0,50 4, M ,10 L ,0002 0, M ,20 L ,0003 0, , ,5 M ,38 L ,0004 1, M ,78 L ,0008 1, M ,70 L ,0013 1, M ,90 L ,0039 2, M ,70 L ,0097 2, M ,30 L ,0268 3, M ,10 L ,1110 4, M ,90 L ,2911 5, M ,90 L ,9767 7, M ,00 * Hub lengths F 1 and F 2 can be shortened with corresponding changes to dimensions A, C and L. Rough bore d 1 or d 2 Finished bore d 1 or d 2 min. max. A B C D E F* G L O Weight with rough bore kg Please specify when ordering: Whether supply is required with rough bores as per catalogue or finished bores. If finish bored, give diameters d 1 and d 2. Tolerance of finished bores is H7. Keyways as per DIN 6885, p. 1. Example for ordering Flexible Coupling L 90 with finished bore d 1 55 and finished bore d 2 87 : L 90, d 1 = 55, d 2 = 87 10

11 Flexible Couplings LK Hubs with backlash free clamping connections L F O F ø E ø d1 ø d2 ø D with clamping hub with clamping hub 11-1 Technical Data and Dimensions Coupling size torque M Nm speed min -1 Inertia J kgm 2 parallel misalign - ment min. Finished bore d 1 or d 2 max. LK ,0001 0, ,10 LK ,0002 0, ,20 LK ,0003 0, , ,38 LK ,0004 1, ,78 LK ,0008 1, ,70 D E F L O Weight with rough bore kg Please specify when ordering: If finish bored, give diameters d 1 and d 2. Tolerance of finished bores is H7. Example for ordering Flexible Coupling LK 16 with finished bore d 1 8 and finished bore d 2 15 : LK 16, d 1 = 8, d 2 = 15 11

12 Flexible Couplings LF Flange connection with flange connection with flange connection 12-1 Technical Data and Dimensions Coupling size torque M Nm speed min -1 Inertia J kgm 2 parallel misalign - ment B D H L LF ,0009 1, , , ,5 M 6 1 0,7 LF ,0026 2, , , ,5 M 6 2 1,4 LF ,0053 2, , , ,5 M 8 2 1,9 LF ,0051 2, , , ,0 M 8 3 1,7 LF ,0138 3, , , ,5 M ,2 LF ,0453 4, , , ,0 M ,0 LF ,1314 5, , , ,0 M ,3 LF ,5203 7, , , ,0 M ,2 1) Arrangement of fastening holes for screws Z (DIN EN ISO 4762) on pitch circle T. The hole pattern on the other coupling half is rotated by 90. M H7 N O P R T W Z Hole pattern 1) Weight with rough bore kg Hole pattern 1 Hole pattern 2 Hole pattern 3 Hole pattern 4 Example for ordering Flexible Coupling LF 110: LF

13 Flexible Couplings LA Flange connection and hubs with keyway with flange connection with keyway 13-1 Technical Data and Dimensions Coupling size torque M Nm speed min -1 Inertia J kgm 2 parallel misali gn - ment Rough bore d Finished bore d min. max. A B C LA ,0011 1, M 8 50,0 76, ,5 65 3,5 M 6 1 1,3 LA ,0032 2, M 8 61,0 90, ,5 75 4,5 M 6 2 2,6 LA ,0075 2, M 10 71,5 105, ,5 88 4,5 M 8 2 4,1 LA ,0074 2, M 10 71,5 105, , ,0 M 8 3 4,0 LA ,0203 3, M 12 90,0 131, , ,5 M ,7 LA ,0782 4, M , , ,0 M ,0 LA ,2113 5, M , , ,0 M ,6 LA ,7485 7, M , , ,0 M ,6 Keyways as per DIN 6885, p. 1. * The hub length F can be shortened with corresponding changes to dimensions A, C, K and L. 1) Arrangement of fastening holes for screws Z (DIN EN ISO 4762) on pitch circle T for coupling half with flange connection. D E F* G K L M H7 N O P T W Z Hole Weight pattern 1) rough with bore kg Hole pattern 1 Hole pattern 2 Hole pattern 3 Hole pattern 4 Please specify when ordering: Whether supply is required with rough bore as per catalogue or finished bore. If finished bore, give diameter d. Tolerance of finished bore is H7. Keyway as per DIN 6885, p. 1. Example for ordering Flexible Coupling LA 90 with finished bore 50 : LA 90, d = 50 13

14 Questionnaire for Tru-Line Flange-Couplings RFK Please photocopy or use the PDF-File from our website! Company: Address: Phone: Fax: Department: Name: Enquiry Ref.: Date: 1. Where will the Tru- 1.1Type of machine, machine group or installation: 1.2 Drawing of the coupling with dimensions Line Flange-Couplings of journals of the shafts be used? ø d 1 ø d 2 2. Operating data Drive power P n [kw] shaft speed n M [min -1 ] Nominal torque M N [Nm] torque M max [Nm] Minimum safety factor S min [1] Installation conditions o Outside o In a closed room Temperature range from [ C] to [ C] bending moment M b [Nm] radial force F rad [N] axial force F ax [N] 3. Dimensions Shaft 1/Flange 1 Shaft diameter d 1 [] Shaft material Shaft tolerance T 1W [] Average surface roughness R z1 [µm] Shaft 2/Flange 2 Shaft diameter d 2 [] Shaft material Shaft tolerance T 2W [] Average surface roughness R z2 [µm] 4. Estimated Pieces (one-off) Pieces/month Pieces/year requirements 5. Enclosures o Specifications o Data sheet o Sketch/drawing 14

15 Questionnaire for Tru-Line Flange-Couplings RFK To be filled out in addition when using motor gear unit on rocker Please photocopy or use the PDF-File from our website! Company: Address: Phone: Fax: Department: Name: Enquiry Ref.: Date: Tru-Line Flange-Couplings RFK are primarily used in conveyor systems where the drive unit is compactly arranged on a rocker with a torque support or similar mechanisms. Here, bending moments are applied in the shafts on both sides of the Tru-Line Flange-Coupling. These are caused by the reaction force of the drive torque in the torque support and the weight of the rocker. In order to avoid fatigue failures of these shafts, a suitable verification calculation is to be performed, in accordance for example with the state of the art of DIN 743, 2012 edition. We will be happy to assist you with this, but we do need the questionnaire to be filled out completely first. g d Gw b a e c 2.1 Addition to If the installation conditions are different, please send us a description and drawing. operating data We will be happy to look at these and make suggestions. 3.1 Addition to Distance to the torque support a [] dimensions e [] Distance to the bearing d [] Distance to the centre of gravity b c [] [] Angle g [ ] Total weight G W [kg] 15

16 Precision Clamping Fixtures Bonded Disc Packs Precision Clamping Fixtures based on the unique method of the RINGSPANN Clamping Disc. Taper Collets Precision Clamping Fixtures for clamping thin or thick walled components on long clamping length. Taper Sleeves Precision Clamping Fixtures for clamping compact components with short or long clamping lengths. Flat Elements Very short Precision Clamping Fixtures for clamping thick walled components with large clamping diameter and very short clamping depths. Clamping Clutches For rapid changes and precise clamping of profile rollers or printing rollers in printing presses in gravure and flexographic printing. Catalogue 10 Catalogue 10 Catalogue 10 Catalogue 10 Catalogue 10 Freewheels Backstops Automatic protection against reverse running of conveyor belts, elevators, pumps and fans. Overrunning Clutches Automatic engaging and disengaging of drives. Indexing Freewheels For gradual feed of materials. Housing Freewheels Automatic engaging and disengaging of multimotor drives for installations with continuous operation. Cage Freewheels For installation between customersupplied inner and outer rings. Catalogue 84 Catalogue 84 Catalogue 84 Catalogue 84 Catalogue 84 Brakes Industrial Disc Brakes Spring activated - pneumatically, hydraulically, electromagnetically or manually released. Industrial Disc Brakes Pneumatically activated - spring released. Industrial Disc Brakes Hydraulically activated - non-releasing or spring released. Industrial Disc Brakes Spring activated - hydraulically released. Clamping Units Spring activated - hydraulically or pneumatically released. For secure and precise positioning of piston rods. Catalogue 46 Catalogue 46 Catalogue 46 Catalogue 46 Catalogue 46 Shaft-Hub-Connections Two-part Shrink Discs External clamping connection for simple and secure mounting without torque wrench. Three-part Shrink Discs External clamping connection for the fastening of hollow shafts on solid shafts. Cone Clamping Elements Internal clamping connection in small dimensions for high torques. Star and Clamping Discs Shaft-Hub- Connection for frequent clamping and release. Star Spring Washers Axial spring element for preloading of ball bearings. Catalogue 36 Catalogue 36 Catalogue 36 Catalogue 36 Catalogue 36 Overload Clutches Torque Limiters with Screw Face Reliable overload protection for tough operating conditions. Torque Limiters with Rollers With double or single Rollers. Through ratcheting or disengaging, also for 360 synchronous running. Torque Limiters with Balls Reliable overload protection with maximum response accuracy. Also backlash free. Torque Limiters with Friction Linings RIMOSTAT Torque Limiter for constant torque. Belleville Spring Torque Limiter for simple release. Force Limiters Reliable axial overload protection in piston rods. Catalogue 45 Catalogue 45 Catalogue 45 Catalogue 45 Catalogue 45 Couplings Flange-Couplings Rigid, easily removable shaft coupling with backlash free cone clamping connections. Rigid Couplings Rigid, easily removable shaft coupling with backlash free cone clamping connection. Flexible Couplings Large, allowed radial and angular misalignements. Minimum resiliency. Flexible Couplings Large, allowed radial and angular misalignements. Minimum resiliency. Catalogue 44 Catalogue 44 Catalogue 44 Catalogue 44 Schaberweg Bad Homburg, Germany Phone Fax info@ringspann.com

Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Tru-Line Flange-Couplings Rigid Shaft Couplings Flexible Couplings Edition 2015/2016 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Tru-Line Flange-Couplings

More information

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings

Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings

More information

Flexible Couplings 44

Flexible Couplings 44 Flexible Couplings 44 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg MTY (81) 83 54 10 18 Why RINGSPANN Flexible Couplings? No connection of shafts without clutches It is a well-known fact

More information

NEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e

NEW. Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm. E03.050e Cone Clamping Elements Trantorque Keyless Locking Devices for very small diameters from 3 mm NEW E03.050e Backlash free positioning Excellent concentricity Quick mounting by central clamping nut Issue

More information

Housing Freewheels for Multimotor Drives 80.1

Housing Freewheels for Multimotor Drives 80.1 s for Multimotor Drives 80.1 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg s FKhG for Multimotor Drives for automatic connecting and disconnecting of drives on pumps, fans, generators etc.

More information

Force Limiters 49. RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg

Force Limiters 49. RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Force Limiters 49 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg Why RINGSPANN Force Limiters? Why RINGSPANN Force Limiters? There are many ways of transmitting forces and torques in machines,

More information

Shaft-Hub-Connections

Shaft-Hub-Connections Stand: 14.01.2010 Shaft-Hub-Connections Shrink Discs Cone Clamping Elements Star Discs 36 Edition 2012/2013 RINGSPANN Eingetragenes Warenzeichen der RINGSPANN GmbH, Bad Homburg Table of Contents Introduction

More information

For advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX

For advanced drive technology CLAMPEX. Shaft-Hub-Connection. KTR Precision Joints CLAMPEX technology CLAMPEX Shaft-Hub-Connection CLAMPEX KTR Precision Joints 07 technology Table of contents Page Brief information 09 Selection and calculation -5 CLAMPEX -Selection Shaft diameter = d 0 10 0

More information

TRADITIONAL SHAFT HUB CONNECTIONS

TRADITIONAL SHAFT HUB CONNECTIONS TABLE OF CONTENTS MAV locking devices.... Pg. 2 Traditional shaft hub connections...pg. 3 Advantages of MAV locking devices...pg. 4 The wedge principle..... Pg. 5 Installation removal...pg. 6 Characteristics....

More information

RING-flex. Torsionally Rigid Disc Couplings US Partner for performance 1. RINGFEDER Products are available from MARYLAND METRICS

RING-flex. Torsionally Rigid Disc Couplings US Partner for performance 1. RINGFEDER Products are available from MARYLAND METRICS RINGFEDER Products are available from MARYLAND METRICS RING-flex Torsionally Rigid Disc Couplings US 008 Partner for performance RINGFEDER Products are available from MARYLAND METRICS P.O. Box 6 Owings

More information

Torsionally Stiff Steel Lamina Couplings. innovative quality products. optimal cost-performance ratio. certified according to DIN ISO 9001

Torsionally Stiff Steel Lamina Couplings. innovative quality products. optimal cost-performance ratio. certified according to DIN ISO 9001 RGFLEX Torsionally Stiff Steel Lamina Couplings features: innovative quality products large-scale service optimal cost-performance ratio certified according to DN SO 0 worldwide net of distribution www.ktr.com

More information

For advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX

For advanced drive technology CLAMPEX. Shaft-hub-connection. KTR Precision joints CLAMPEX technology CLAMPEX Shaft-hub-connection CLAMPEX KTR Precision joints 227 technology Table of contents Page Brief information 228 Selection and calculation 25-255 CLAMPEX -Selection Shaft diameter = d 0

More information

RIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at

RIGIFLEX -N RADEX -N. Steel laminae coupling. Steel laminae coupling. You will find continuously updated data in our online catalogue at 117 Table of contents 117 Coupling selection steel laminae coupling 119 Description of coupling 121 General information 122 Types and applications 123 Technical data 124 Standard types 126 Special types

More information

MULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings

MULTI CROSS RILLO. Highly flexible tyre coupling with taper bushings MULTI CROSS RILLO Highly flexible tyre coupling with taper bushings Maschinenfabrik Dipl.-Ing. Herwarth Reich GmbH Vierhausstr. 53 D-44807 Bochum P.O. Box 10 20 66 D-44720 Bochum Tel.: +49 / (0)234 / 959

More information

Freewheel Clutches. Backstops Overrunning Clutches Indexing Freewheels. North American Edition 2015/2016

Freewheel Clutches. Backstops Overrunning Clutches Indexing Freewheels. North American Edition 2015/2016 Clutches Backstops Overrunning Clutches Indexing s North American Edition 2015/2016 RINGSPANN Registered trademark of RINGSPANN GmbH, Bad Homburg Table of Contents Technology Introduction Page Introduction

More information

Standard with cone bushing. Backlash-free Safety Clutch

Standard with cone bushing. Backlash-free Safety Clutch EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC

More information

Clutch Couplings FW/FWW. Overrunning Ball Bearing Supported, Sprag Clutch Couplings. FW Series. FWW Series. Typical Applications

Clutch Couplings FW/FWW. Overrunning Ball Bearing Supported, Sprag Clutch Couplings. FW Series. FWW Series. Typical Applications s Overrunning Ball Bearing Supported, Sprag s Series For in-line shaft applications Outer race overrunning intermediate speed Inner race overrunning high speed clutch couplings are comprised of an FSO

More information

Locking Assemblies Shrink Discs Rigid Couplings.

Locking Assemblies Shrink Discs Rigid Couplings. M I N I Locking Assemblies Shrink Discs Rigid Couplings www.mav.it our company We are an Italian company world renowned for our creativity and ethics. Established in 1989 we have rapidly built a reputation

More information

SIT-LOCK self locking elements

SIT-LOCK self locking elements self locking elements Advantages of on the shaft-hub connection compared with traditional systems Easy assembly and disassembly Both actions take place by locking and unlocking the clamping screws with

More information

(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores.

(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores. Fenaflex Couplings The Fenaflex coupling is a highly flexible, torsionally elastic coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.

More information

GEAR-COUPLINGS. Series LX GLX S-NX

GEAR-COUPLINGS. Series LX GLX S-NX GEAR-COUPLINGS Series LX GLX S-NX CONTENTS Application 3 Quality and production 3 Design and characteristics 3 selection 4-5 Key connections 6 Shrink-fit connections 7 Standard design with one-piece housing

More information

LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position. THE ultimate COUPLING from Nm

LIGHTWEIGHT AND COMPACT. SERIES SL Nm. single-position multi-position.   THE ultimate COUPLING from Nm LIGHTWEIGHT AND COMPACT L SAFETY COUPLINGS TOQLIGHT SEIES SL 5 700 Nm THE ultimate COUPLING from 5 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction in comparison

More information

TORQLIGHT SAFETY COUPLINGS

TORQLIGHT SAFETY COUPLINGS LIGHTWEIGHT AND COMPACT single-position TOQLIGHT SAFETY COUPLINGS SEIES SL 10 700 Nm THE ULTIMATE COUPLING FOM 10 700 Nm SEIES SL DESIGN / FEATUES Extremely lightweight construction Up to 60 % weight reduction

More information

Highly Flexible Couplings ELPEX Series

Highly Flexible Couplings ELPEX Series Siemens AG 2015 Highly Flexible Couplings ELPEX Series /2 Overview /2 Benefits /2 Application /2 Design /4 Configuration /5 Technical data /6 Types ENG/ENGS /6 Selection and ordering data /7 Types EFG/EFGS

More information

Sibre All Steel Couplings

Sibre All Steel Couplings Overview Coupling is device to transmit torque from driving side to driven side and also has function of compensation of axial,radial,angular misalignment which generated by manufacturing, installation

More information

In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide

In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide External Clamping devices Overview 3073 Mini-Range For very low torque transmission Very small profile

More information

FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores

FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to Nm of torque and 205 mm bores Edition 10/2014 www.comintec.it FLEXIBLE COUPLINGS - RIGID COUPLINGS Up to 130.000 Nm of torque and 205 mm bores (BACKLASH FREE) Technology for Safety FLEXIBLE COUPLINGS - RIGID COUPLINGS (BACKLASH FREE):

More information

MINIATURE METAL BELLOWS COUPLINGS

MINIATURE METAL BELLOWS COUPLINGS VERSATILE AND PRECISE. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE

More information

SPIDERFLEX SPIDERJAW/WRAP PINFLEX CROWNPIN TYREFLEX DISCFLEX CHAINFLEX RBI GEARFLEX HYDRASTART FREEWHEELS. Industrial Couplings & Freewheel Clutches

SPIDERFLEX SPIDERJAW/WRAP PINFLEX CROWNPIN TYREFLEX DISCFLEX CHAINFLEX RBI GEARFLEX HYDRASTART FREEWHEELS. Industrial Couplings & Freewheel Clutches SPIDERFLEX SPIDERJAW/WRAP PINFLEX CROWNPIN TYREFLEX DISCFLEX CHAINFLEX RBI GEARFLEX HYDRASTART FREEWHEELS Industrial Couplings & Freewheel Clutches Couplings Crownpin Heavy duty pin and buffer 249 kn.m

More information

Crossflex Disc Couplings

Crossflex Disc Couplings Crossflex Disc flexible shaft couplings provide reliable and accurate transmission of mechanical power for applications requiring low maintenance and no lubrication. The couplings are particularly suited

More information

Locking Assemblies & Locking Elements

Locking Assemblies & Locking Elements US 01 2016 Locking Assemblies & Locking Elements Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission Today s RINGFEDER POWER TRANSMISSION GMBH

More information

PK couplings. Product description. PK couplings

PK couplings. Product description. PK couplings Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment

More information

Product description. PK couplings

Product description. PK couplings Product description The INKOMA-PK coupling is machine component designed to transmit torque between axially parallel, radially offset shafts. The coupling permits both static and dynamic stepless adjustment

More information

TORQUE LIMITER SERIES 200

TORQUE LIMITER SERIES 200 TORQUE LIMITER SERIES 200 Quality and Autogard are synonymous with overload protection. The company's reputation for high quality products is derived from over 40 years of design innovation and production.

More information

CLASSIFICATION OF ROLLING-ELEMENT BEARINGS

CLASSIFICATION OF ROLLING-ELEMENT BEARINGS CLASSIFICATION OF ROLLING-ELEMENT BEARINGS Ball bearings can operate at higher speed in comparison to roller bearings because they have lower friction. In particular, the balls have less viscous resistance

More information

CLAMP AND FLANGE COUPLINGS

CLAMP AND FLANGE COUPLINGS POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly

More information

Torsionally Rigid Disc Couplings

Torsionally Rigid Disc Couplings US 05 2016 Torsionally Rigid Disc Couplings Partner for Performance www.ringfeder.com Welcome to your system supplier for every aspect of power transmission RINGFEDER POWER TRANSMISSION We say what we

More information

RINGFEDER Locking Assemblies. Catalogue. RfN For high torques & axial loads

RINGFEDER Locking Assemblies. Catalogue. RfN For high torques & axial loads RINGFEDER Locking Assemblies GB 03 04 Catalogue RfN 7014 For high torques & axial loads RINGFEDER Locking Assemblies RfN 7014 Please note that our guarantee refers to our products only. Because of the

More information

Selection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766

Selection Tool. on the Internet at   in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766 Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches

More information

Series 54 and S54 Resilient Couplings

Series 54 and S54 Resilient Couplings Series 54 and S54 Resilient s Bibby Transmissions Resilient s Bibby are the world originator of the resilient grid type shaft coupling, which is universally accepted by engineers to be one of the most

More information

Voith Turbo. Voith Disc-Flex MR Coupling

Voith Turbo. Voith Disc-Flex MR Coupling Voith Turbo Voith Disc-lex MR Coupling Torsionally rigid and backlash free drive couplings C - connecter bolts - driver hub - flex pack X - spacer - flex pack - driven hub C - connect bolts Exploded view

More information

Comparison Chart. extremely difficult. Finally, separated components can rarely be re-used.

Comparison Chart. extremely difficult. Finally, separated components can rarely be re-used. JAN 2014 Traditional Connections Why Go Keyless Keyed Bushing Systems Both QD and Taper-Lock bushing and weld-on hub systems are popular component mounting technologies. Yet both are ultimately keyed connections

More information

Jaw Couplings REK DQO

Jaw Couplings REK DQO Jaw s REK DQO elastic for dynamic applications with radially mountable elastomer cushions 40-1 Features s up to 169 000 Nm Compensation of axial, radial and angular misalignments Adsorbs vibrations Progressive

More information

EXAMPLES GEARS. page 1

EXAMPLES GEARS. page 1 (EXAMPLES GEARS) EXAMPLES GEARS Example 1: Shilds p. 76 A 20 full depth spur pinion is to trans mit 1.25 kw at 850 rpm. The pinion has 18 teeth. Determine the Lewis bending stress if the module is 2 and

More information

heet: 1 of 22 Backlash-free, torsionally stiff and maintenance-free coupling Type with setscrew Type with clamping hubs Type KN (Taper hubs) Type M with setscrew Type M with clamping hubs Type PI 11-3379-883

More information

RE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles

RE / STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles RE 2 970/.99 STAR Tolerance Rings STAR Ball Knobs, Knob and Lever Type Handles STAR Tolerance Rings Product Overview Tolerance rings are made of hard, embossed spring steel strip and belong to the class

More information

Installation and Operational Instructions for ROBA -D Couplings Type 91_. _

Installation and Operational Instructions for ROBA -D Couplings Type 91_. _ Please read the Installation and Operational Instructions carefully and follow them accordingly! Ignoring these Instructions may lead to malfunctions or to coupling failure, resulting in damage to other

More information

Power Transmission. Installation and Operating Instructions for Integrated Freewheels FXRV and FXRT. E e.

Power Transmission. Installation and Operating Instructions for Integrated Freewheels FXRV and FXRT. E e. Power Transmission Installation and Operating Instructions for Schaberweg 30-34 Telephone +49 6172 275-0 61348 Bad Homburg Telefax +49 6172 275-275 Germany www.ringspann.com mailbox@ringspann.com Issue:

More information

Power Transmission. Installation and Operating Instructions for Internal Freewheels ZZ, ZZ...2RS, ZZ...P2RS, ZZ...P and ZZ...PP. E 08.

Power Transmission. Installation and Operating Instructions for Internal Freewheels ZZ, ZZ...2RS, ZZ...P2RS, ZZ...P and ZZ...PP. E 08. Power Transmission Installation and Operating Instructions for Internal Freewheels ZZ, ZZ...2RS, ZZ...P2RS, ZZ...P and ZZ...PP Schaberweg 30-34 61348 Bad Homburg Germany Telephone +49 6172 275-0 Telefax

More information

Locking Assemblies & Locking Elements

Locking Assemblies & Locking Elements US 12 2010 Locking Assemblies & Locking Elements Partner for performance www.ringfeder.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld, Germany to fabricate

More information

Guide units. For toolmaking, fixture manufacturing and machine engineering

Guide units. For toolmaking, fixture manufacturing and machine engineering Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar

More information

Specifications. Trantorque GT CALL FAX

Specifications. Trantorque GT CALL FAX GT Specifications The following pages contain engineering data and product specifications for GT. For CAD drawings of GT, please click on the part number to download the drawing. All drawings are in AutoCAD

More information

Axial-radial cylindrical roller bearings

Axial-radial cylindrical roller bearings Axial-radial cylindrical roller bearings Designs and variants.............. 320 Bearing data..................... 321 (Boundary dimensions, tolerances) Product table 5.1 Axial-radial cylindrical roller

More information

TORQUE LIMITER SERIES 600. Airjustor

TORQUE LIMITER SERIES 600. Airjustor TORQUE LIMITER SERIES 600 Airjustor Quality and Autogard are synonymous with overload protection. The Company's reputation for high quality products is derived from over 40 years of design, innovation

More information

Accessories smart additions for efficiency and intelligent performance

Accessories smart additions for efficiency and intelligent performance smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.

More information

RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2

RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2 RINGFEDER KEYLESS SHAFT/HUB CONNECTIONS LOCKING ASSEMBLIES TM LOCKING ELEMENTS TM SHRINK DISCS W-300-2 1 Ringfeder Corporation Catalog W-300-1 Shaft-Hub Locking Devices Ringfeder unique frictional, keyless

More information

TOOLFLEX Operating-/Assembly Instructions

TOOLFLEX Operating-/Assembly Instructions D-807 Rheine heet: 5810 EN 1 of 19 Backlash-free, torsionally stiff and maintenance-free coupling is a backlash-free, torsionally stiff and maintenance-free metal bellow-type coupling designed to be used

More information

General Purpose Motion Control Couplings

General Purpose Motion Control Couplings General Purpose Motion Control s Sliding Disc (Oldham) Universal ateral (Uni-at) Backlash-free up to 10 8 turns Can tolerate large misalignments Slight damping characteristics Flex-free mechanical action

More information

SHAFT MOUNTED HELICAL GEAR REDUCER

SHAFT MOUNTED HELICAL GEAR REDUCER Shaft Mounted Helical Gear Assembly INTRODUCTION The VIGNESSH Shaft Mounted Helical Gear Units are the result of experience in design and production, taking advantage of the most recent relevent research

More information

Solutions for power transmission. MAV-standardisarja.

Solutions for power transmission. MAV-standardisarja. Solutions for power transmission MAV-standardisarja www.konaflex.fi L O C K I N G A S S E M B L I E S Shrink disc Mini Series Rigid Couplings www.mav.it our company We are an Italian company world renowned

More information

Torque Limiter 320 Series Overview. Torque Limiter 320 Series

Torque Limiter 320 Series Overview. Torque Limiter 320 Series Torque Limiter 0 Series Overview Torque Limiter 0 Series Torque Limiter 0 Series For more than 80 years, Autogard products have led the industry in overload protection with high-quality products, design

More information

Coupling description. Disc pack with bolts

Coupling description. Disc pack with bolts Coupling description RADEX -N couplings are designed to transmit torque between drive and driven components via steel hubs and flexible metallic elements commonly known as discs. The combination of these

More information

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions

BoWex FLE-PA. BoWex FLE-PAC. KTR-N Sheet: Edition: EN 1 of BoWex FLE-PA / FLE-PAC Operating/Assembly instructions 1 of 17 is a torsionally rigid flange coupling. It is able to compensate for shaft misalignment, for example caused by manufacturing inaccuracies, thermal expansion, etc. BoWex FLE-PA BoWex FLE-PAC Drawn:

More information

KTR Torque Limiters Overload Protection Systems

KTR Torque Limiters Overload Protection Systems KT Torque Limiters Overload Protection Systems UFLEX - Friction Disk - Zero Backlash Ball Detent KT SI - Ball/oller Bearing Style KT SI Compact - Zero Backlash Ball Detent Catalog Contents (Metric) Page

More information

Eflex and Powerpin Flexible Couplings

Eflex and Powerpin Flexible Couplings Eflex and Powerpin Flexible s Accepts parallel, angular and axial misalignment Torsionally flexible Simple assembly Wide range of standard designs No lubrication 80 or 90 shore hardness close fitting elements

More information

SCHMIDT-KUPPLUNG GmbH

SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung SCHMIDT-KUPPLUNG GmbH Schmidt-Kupplung About us About us In the early 1960s Richard Schmidt developed of propulsion systems for rockets in a zero-gravity environment. Among the possible

More information

Highly Flexible Couplings ELPEX-S Series

Highly Flexible Couplings ELPEX-S Series Highly Flexible Couplings ELPEX-S Series /2 Overview /2 Benefits /2 Application /2 Design /4 Function /4 Configuration /6 Technical data /9 Type E /9 Selection and ordering data /10 Type ESD /10 Selection

More information

METALDRIVE Disc Couplings

METALDRIVE Disc Couplings ETADRIVE Disc Couplings ETADRIVE ETADRIVE disc couplings ETADRIVE couplings are fully made of steel and are used in all applications where high reliability, precision, and no maintenance are required.

More information

hydraulic actuated products EP: EP:

hydraulic actuated products EP: EP: In-house development Own manufacturing Sole distributor in Germany Working with distributors worldwide hydraulic actuated products EP: 0 812 397 EP: 1 666 748 Overview Hydraulic shrink disc SHS Standard

More information

ROTARY MOTION CONTROL

ROTARY MOTION CONTROL ROTARY MOTION ONTROL Technical Data Sheet Mechanical Torque Limiter The trend in industry is to design and incorporate more automation into production processes. Machines are becoming more accurate, requiring

More information

Flexible Couplings RUPEX Series

Flexible Couplings RUPEX Series Flexible Couplings RUPEX Series /2 Overview /2 Benefits /2 Application /2 Design /4 Function /4 Technical data /6 Type RWN hub material grey cast iron /6 Selection and ordering data / Type RWS hub material

More information

Shaft Mounted Speed Reducer. Technical Catalogue

Shaft Mounted Speed Reducer. Technical Catalogue Shaft Mounted Speed Reducer Technical Catalogue Where others fit, We perform Contents The Challenge SMSR stands tall amongst the crowd. Packed full of attention to detail, the Challenge SMSR delivers performance

More information

Advantages and Disadvantages of Rolling Contact Bearings Over Sliding Contact Bearings

Advantages and Disadvantages of Rolling Contact Bearings Over Sliding Contact Bearings Advantages and Disadvantages of Rolling Contact Bearings Over Sliding Contact Bearings Advantages 1. Low starting and running friction except at very high speeds. 2. Ability to withstand momentary shock

More information

Highly Flexible Couplings ELPEX-B Series

Highly Flexible Couplings ELPEX-B Series Siemens AG 2015 Highly Flexible Couplings ELPEX-B Series /2 Overview /2 Benefits /2 Application /2 Design / Technical data /5 Type EBWN /5 Selection and ordering data /6 Type EBWT /6 Selection and ordering

More information

Full disengagement ROBUST AND COMPACT TORQUE LIMITERS. THE ULTIMATE COUPLING FROM 1, ,000 Nm.

Full disengagement ROBUST AND COMPACT TORQUE LIMITERS. THE ULTIMATE COUPLING FROM 1, ,000 Nm. ROBUST AND COMPACT Full disengagement TORQUE LIMITERS SERIES ST 1,000 160,000 Nm THE ULTIMATE COUPLING FROM 1,000 160,000 Nm Full disengagement SERIES ST TORQUE LIMITERS Areas of application for the ST

More information

TORQUE LIMITER SERIES 320

TORQUE LIMITER SERIES 320 TORQUE IMITER SERIES 320 AUTOGARD SERIES 320 TORQUE IMITER Quality and Autogard are synonymous with overload protection. The company s reputation for high quality products is derived from over 35 years

More information

Single direction thrust ball bearings Double direction thrust ball bearings

Single direction thrust ball bearings Double direction thrust ball bearings Thrust ball bearings Single direction thrust ball bearings... 838 Double direction thrust ball bearings... 839 Bearing data general... 840 Dimensions... 840 Tolerances... 840 Misalignment... 840 Cages...

More information

Frictional Connections Catalogue

Frictional Connections Catalogue MMADE IN GERMANY Frictional Connections Catalogue ADE IN GERMANY Certified in accordance with DIN ISO 9001:2008 FRICTIONAL CONNECTIONS TECHNOLOGY THAT CONNECTS Dear business partner, STÜWE GmbH & Co. KG

More information

Shaft Mounted Speed Reducers

Shaft Mounted Speed Reducers s Metric Range Features The Challenge SMSR stands tall amongst the crowd. Packed full of attention to detail, the Challenge SMSR delivers performance in the harshest of applications. Shaft mounted drives

More information

lea) shows a compression type. These couplings are used for

lea) shows a compression type. These couplings are used for Mechanical Equipment - Course 230.1 SHAFT COUPLINGS Couplings Couplings are used to join two shafts provide some means of transmitting power source to a driven member. There are two tiona of couplings,

More information

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company

Compact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings

More information

Precision Modules PSK

Precision Modules PSK Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum

More information

TECHNODRIVE-PTO Power take-off clutches with speed reducing gearboxes

TECHNODRIVE-PTO Power take-off clutches with speed reducing gearboxes TECHNODRIVE-PTO Power take-off clutches with speed reducing gearboxes Your drive is our strength. Your strength is our drive. Contents Page General technical description... 3 s and application examples...

More information

SITEX ST Couplings SITEX ST

SITEX ST Couplings SITEX ST STX ST Couplings STX ST Contents STX ST Couplings Page Description 97 Features 97 STX ST executions 98 ST type C 99 ST type CV 100 ST type CF A-B-C (AMA) 101 ST type CF D--F 102 Coupling selection 103

More information

Contents. SKF Grid Couplings Selection... 34

Contents. SKF Grid Couplings Selection... 34 SKF Couplings Contents The SKF brand now stands for more than ever before, and means more to you as a valued customer. While SKF maintains its leadership as a high-quality bearing manufacturer throughout

More information

METALDRIVE Disc couplings

METALDRIVE Disc couplings ETADRIVE Disc couplings ETADRIVE couplings are fully made of steel and are used in all applications where high reliability, precision and no maintenance are required. Features All steel made Superior disc

More information

Mönninghoff electromagnetic tooth clutches

Mönninghoff electromagnetic tooth clutches Mönninghoff electromagnetic tooth clutches High torque without slip in compact size Angular synchronisation of input to output possible Torque limiting and other special tooth options readily available

More information

RFC SPECIALTY LOCKING DEVICES

RFC SPECIALTY LOCKING DEVICES RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142

More information

Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48

Installation and Operating Instructions for ROBA -ES couplings Type 940. _. _ Sizes 14-48 Table of contents: Please read and observe this Operating Instruction carefully. A possible malfunction or failure of the clutch and damage may be caused by not observing it. Page 1: - Table of contents

More information

SITEX ST Couplings SITEX ST

SITEX ST Couplings SITEX ST STX ST Couplings STX ST STX ST couplings Description STX ST couplings are fully manufactured in high quality steel. They are made of 1 or 2 geared hubs which are coupled with one sleeve through which the

More information

CLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE

CLAMPING ELEMENTS SELF-CENTRING RCK 15 TYPE SELF-CENTRING RCK 13 TYPE CLAMPING ELEMENTS The clamping system connects one or two component parts solidly to the drive shaft, which allow motion to be transmitted or to withstand an axial thrust. Friction connection enables gaps

More information

2. The tooth outer gear is manufactured in crown shape. So, even when the axial misalignment occurs it provides good operation.

2. The tooth outer gear is manufactured in crown shape. So, even when the axial misalignment occurs it provides good operation. GER Distinctive Feature 1. With the capacity of handling heavy loads, gear couplings are much smaller and lighter than any other couplings. Noise or vibration is hardly produced even in high speed operation.

More information

Installation Tensioning Procedure

Installation Tensioning Procedure Contents PARTICULARS Introduction PIX X treme HTD Belts Construction Features Designation Pitch range Length range Pulley Dimensions Length tolerances Width tolerances PIX X treme Classical Belts Construction

More information

POSIFLEX. Gear couplings

POSIFLEX. Gear couplings POSIFLEX Gear couplings The complete range TSCHAN -S Δ kw Flexible couplings Δ kr TSCHAN -B Nor-Mex Δ ka Torsionally rigid couplings TK 100% TK 100% POSIMIN - PHP POSIFLEX TSCHAN-TK 3 Features Toothing

More information

Gear couplings with crowned toothing ZAKU-N

Gear couplings with crowned toothing ZAKU-N Gear couplings with crowned toothing ZAKUN KWN 17 Couplings from Dresden / Germany By specialists for specialists general information 2 Fit bolt Sleeve Hub crowned toothing Disc Figure 1: Basic structure

More information

GASKETS O-RING SEALS FINISHED BORE AND KEYWAY ON REQUEST DETACHABLE SEAL HOLDERS FOR EASY ASSEMBLY & DISASSEMBLY SELF - LOCKING SCREWS FORGED STEEL

GASKETS O-RING SEALS FINISHED BORE AND KEYWAY ON REQUEST DETACHABLE SEAL HOLDERS FOR EASY ASSEMBLY & DISASSEMBLY SELF - LOCKING SCREWS FORGED STEEL escogear FLEXIBLE GEAR COUPLINGS SERIES C and C... M The most compact solution Maximum torque: up to 174 000 Nm Bores: up to 290 mm O-RING SEALS GASKETS FORGED STEEL CONTINUOUS SLEEVE WITH INTERNAL STRAIGHT

More information

The right torque in the right place

The right torque in the right place Technical article for the trade press (Parts I, II and III) October 2017 Power transmission / conveying engineering / design engineering / machine elements / system and work safety The right torque in

More information

Marine Engineering Exam Resource Review of Couplings

Marine Engineering Exam Resource Review of Couplings 1. What are rigid couplings used for? Used to join drive shafts together. True alignment and rigidity are required. Example Drive shafts and production lines, bridge cranes, solid shaft that needs to be

More information

OIL/AIR ACTUATED POWER TAKE OFF

OIL/AIR ACTUATED POWER TAKE OFF OIL/AIR ACTUATED POWER TAKE OFF POWER TAKE OFF O - FOR SIDE LOAD APPLICATIONS Unique greased for life bearing design Eliminate the pilot bearing inside the engine flywheel R - - Rotary union for high reliability

More information

H1600 Mechanical Overload Clutches HOR Series

H1600 Mechanical Overload Clutches HOR Series H1600 Mechanical Overload es HOR Series Section Contents FEATURES... 36 OPERATING PRINCIPLES... 36 SELECTION... 37 HOW TO ORER... 37 RATINGS AN IMENSIONS... 38 MOUNTING HOLE PATTERNS... 42 GENERAL INFORMATION...

More information