Convoluted Teflon Hose

Size: px

Start display at page:

Download "Convoluted Teflon Hose"

Amos Goodman
5 years ago
Views:

1 eroquip E645 Nomex Reinforced onvoluted Teflon Hose Lightweight Meets performance requirements of S % tighter bend radius Improved flexing characteristics

2 Table of ontents Weight omparison 3 E645 Hose Data 3 Fitting Data luminum Flared Nipples With RES Sockets 4 Fitting Data luminum Nipples With RES Sockets 6 Hose ssembly onfigurations 6 How To Order 7 2 ETON erospace Group TF March 2013

3 E645 Nomex Reinforced onvoluted Teflon Hose Up to 36% more lightweight than equivalent wire braid hose E645 Hose Data In/Lbs in light type. Millimeters and ars in bold type Eaton s eroquip E645 hose was developed to combine the routing flexibility of lightweight rubber hose with the fluid compatibility of Teflon hose. onsisting of a conductive convoluted Teflon tube and Nomex reinforcement, E645 hose is lightweight, flexible and ideal for application such as electronic coolant lines, fuel lines, etc. Lightweight aluminum nipple assemblies and stainless steel sockets are offered as standard end fittings to ensure Eaton s proven compression crimp retention. E645 hose meets or exceeds the performance requirements of S1227, lass 2, Type 1. (-10, -12 and 16 sizes require an internal support coil to meet vacuum requirements of S1227.) Operating temperature range: -65 F to +275 F (-54 to +135º). Size Operating Pressure psig/ar I.D. Min. In/mm O.D. Max In/mm **Vacuum rating without internal support coil Min. end Radius In/mm Vacuum Rating In/mm ** ** ** 254 Weight omparison: Lbs./Ft. in light type, Kgs./ml in bold type SIZE E645 HOSE (NOMEX RID) E641 HOSE (RES RID) ETON erospace Group TF March

4 Fitting Data luminum 37º (S4395) Flared Nipples E29970 Size Thread T * Max Nom. Ref Weight UNJF UNJF UNJF UNJF UNJF UNJF E30022 Size Thread T * Max Nom. Ref Weight UNJF UNJF UNJF UNJF UNJ UNJ E29972 Size Thread T * Max Nom. Ref Weight UNJF UNJF UNJF UNJF UNJ UNJ *DIMENSION IS MESURED FROM END OF SOKET. Inches in light type. Millimeters and Kilograms in bold type. Fitting Dash Size Letter ode E G H J K M N P R 4 ETON erospace Group TF March 2013

5 Fitting Data luminum Flareless (NS1760) Nipples E30023 Size Thread T * Max Nom. Ref D Dim Weight D UNJF UNJF UNJF / / / / / / UNJF / / UNJF / / UNJF / E30025 Size Thread T * Max Nom. Ref D Dim Weight UNJF / / UNJF / / UNJF / / UNJF / / D UNJ UNJ / / / / E30027 Size Thread T * Max Nom. Ref D Dim Weight UNJF UNJF / / / / D UNJF UNJF UNJ UNJ / / / / / / / / *DIMENSION IS MESURED FROM END OF SOKET. Inches in light type. Millimeters and Kilograms in bold type Fitting Dash Size Letter ode E G H J K M N P R ETON erospace Group TF March

6 Hose ssembly onfigurations Flared onfiguration Hose Size Hose ssembly P/N Nipple Nipple St to St -4 to -16 E E29970 E29970 St to 45-4 to -16 E E29970 E30022 St to 90-4 to -16 E E29970 E to 45-4 to -16 E5279 E30022 E to 90-4 to -16 E5294 E30022 E to 90-4 to -16 E5280 E29972 E29972 Flareless onfiguration Hose Size Hose ssembly P/N Nipple Nipple St to St -4 to -16 E E30023 E30023 St to 45-4 to -16 E E30023 E30025 St to 90-4 to -16 E E30023 E to 45-4 to -16 E5228 E30025 E to 90-4 to -16 E5329 E30025 E to 90-4 to -16 E5330 E30027 E ETON erospace Group TF March 2013

7 eroquip rand Teflon Hose ssemblies How to Order ssembly Length ssembly length is measured from sealing surface to sealing surface. When defining the part number length, measure the length from gauge point to gauge point of NS 1760 flareless fittings. The dimensions on page 5 shows the difference between overall length and length to gauge point. With elbow fittings, the measuring point is the intersection of the center line of the elbow with the face of the sealing surface. Examples: ase number for all double elbow assemblies. Size ode (see below). ssembly length, in inches, always four digits; last digit indicates fractional length in 1/8 s of an inch. Double Elbow Hose ssemblies E52XX G ssembly Length Tolerances Up to and including 18 inches: ±.125 bove 18 inches, to and including 36 inches: ±.250 bove 36 inches, to and including 50 inches: ±.500 bove 50 inches: ±1% of length Rotational ngle Measurement On assemblies with an elbow fitting on each end, measure the rotation angle as shown. The index angle will follow the basic style hose assembly part number indicated (see example for double elbow assemblies). In all cases, the angle should be expressed in 3 digits. For example, 35 should be written as 035. If the angle desired is 0, specify 000. Elbow position angle, expressed in three digits. ase number for all straight and single elbow assemblies Size ode (see below) ssembly length, in inches, always four digits; last digit indicates fractional length in 1/8 s of an inch. Straight and Single Elbow Hose ssemblies E101XXXX G 0184 Fitting Dash Size Letter ode E G H J K M N P R ETON erospace Group TF March

8 Eaton erospace Group Fluid & Electrical Distribution Division 300 South East venue Jackson, Michigan Phone: (517) Fax: (517) Eaton erospace Group 9650 Jeronimo Road Irvine, alifornia Phone: (949) Fax: (949) opyright 2013 Eaton Nomex and Teflon are DuPont trademarks ll Rights Reserved opying or Editing is Forbidden Form No. TF (Supersedes 3) March 2013

Kevlar Reinforced High Pressure PTFE Hose Assemblies AE319, AE334, AE355

Kevlar Reinforced High Pressure PTFE Hose Assemblies AE319, AE334, AE355 eroquip evlar Reinforced High Pressure PTFE Hose ssemblies E319, E334, E355 Lightweight Integral brasion Resistance Qualified to Industry Standards ompatible with erospace Fluids vailable for 3000, 4000