Aerospace Kevlar Reinforced High Pressure Teflon Hose Assemblies AE319, AE334, AE355
|
|
- Margaret Allison
- 6 years ago
- Views:
Transcription
1 erospace evlar Reinforced High Pressure Teflon Hose ssemblies E319, E334, E355 Lightweight Integral brasion Resistance Qualified to Industry Standards ompatible with erospace Fluids vailable for 3000, 4000 or 5000psi pplications
2 evlar Reinforced High Pressure Teflon Hoses and Fittings General haracteristics Today, as in the past, Eaton meets the challenge of the aerospace industry s continuing requirements for greater weight savings, superior performance and increased value with its evlar reinforced hose product line. The same evlar fiber that is used in bulletproof vests is used as the reinforcement material in Eaton s eroquip brand hose styles. The result is lightweight hose assemblies that are capable of handling hydraulic pressures up to 5000psi. evlar brand hoses are made of high temperature resistant aramid fibers having a unique combination of toughness and exceptional thermal stability. These properties offer increased strength and reduced weight for the complete line of reinforced eroquip brand hoses. The Teflon tube used in Eaton s reinforced high pressure hose is manufactured to the same stringent standards as the tube used in our wire reinforced hoses. Inherent resiliency and toughness are built into the extruded tube by the close control of factors affecting crystallinity. The extruded tube has a tough, smooth, waxlike texture which resists erosion and has sufficient conductivity to prevent electrostatically-induced hose failures. pplication ata The evlar reinforced Teflon hose is suitable for use with fuels, lube oils, hydraulic fluids, coolants or solvents commonly used in aircraft applications. Superior vibration resistance and low volumetric expansion make these hoses ideal for high pressure hydraulic system applications. The hoses shown in this bulletin are rated according to the listed industry specifications. These various ratings are for specific service requirements related to specified temperature, pressure and impulse conditions. In many cases, a specific rating can be successfully exceeded if other variables are modified. Our trained support staff are available to help with recommendations for special applications. Identification white layline consisting of Eaton s eroquip brand hose part number, size and specification number (where applicable) is printed along the length of the hose. Fittings Fittings are available in both flareless and rcseal styles to mate with S33514 or S4375 (applies to E319 and E355) and S85421 or S4207 end connections. E334 flareless mates with S5827 or EN6123. In addition, elbow fittings are available in standard 45 and 90 styles. ontact Eaton about special fittings for custom installations. Fitting Material E319/E334 FITTINGS Nut - Ti-6I-4V (MS4928 or MS4965) Wire RES (MS5685) or 302 RES (MS5637) Nipple - Ti-6I-4V (MS4965) Socket RES (QQ-S-763 and MS5639) E355 FITTINGS Nut - Ti-6I-4V (MS4928 or MS4965) Wire RES (MS5685) or 302 RES (MS5637) Nipple - Ti-6I-4V (MS4965 or MS4928) Socket - ommercially pure titanium (STM B 348 Grade 2) E319 Heavy uty Hose 3000/4000psi Operating Pressure Hose ata Size O.. Tube Size (in) Hose I.. minimum (in) Hose O.. maximum (in) Max. Operating Pressure (psi) Proof Pressure (psi) Min. High Temp. Burst Pressure (psi) 12,000 12,000 12,000 12,000 12, Min. Room Temp. Burst Pressure (psi) 16,000 16,000 16,000 16,000 16,000 12,000 Minimum Bend Radius (in) Nominal Weight per Inch (lbs) Temperature Range: -65 F to +275 F (-54 to +135 ) onstruction: Extruded, conductive Teflon inner tube, with one (-4 size), two (-6 through -10 sizes) or three (-12 and -16 sizes) layers of full-coverage evlar reinforcement and a full-coverage black PBI/ evlar (-4 through -12 sizes) or black polyester (-16 size) outer braid. Industry Specifications: Qualified to Eaton specifications for 4000psi operation and meets performance requirements of S4623. F pprovals: Sizes -4 thru -12 are certified to TSO-75, Type II-B- S/P 2 ETON ORPORTION erospace TF ecember 2007
3 E319 Fittings and Hose ssemblies 3000psi Flareless Fitting imensions Size *Nipple ssembly Max. Ref. Nom. Min. H Ref. Thread T Hex Y Ref. -4 E32821E UNJF-3B E32821G UNJF-3B E32821H UNJF-3B Nom. Wt. (lbs) w/socket Straight THRE T -10 E32821J UNJF-3B E UNJ-3B E32821M UNJ-3B E32898E UNJF-3B E32898G UNJF-3B THRE T -8 E32898H UNJF-3B E32898J UNJF-3B E UNJ-3B E32898M UNJ-3B E32822E UNJF-3B E32822G UNJF-3B E32822H UNJF-3B E32822J UNJF-3B THRE T -12 E UNJ-3B E32822M UNJ-3B *Nipple assembly part number does not include socket 3000psi Hose ssemblies - Flareless to Flareless B Sizes ssembly Nipple Nipple B Socket -4 thru E32821 E32821 E thru E32821 E32898 E thru E32821 E32822 E thru E32898 E32898 E thru E32898 E32822 E thru E32822 E32822 E28571 ETON ORPORTION erospace TF ecember
4 E319 Fittings and Hose ssemblies 4000psi Flareless Fitting imensions Straight THRE T Size *Nipple ssembly Max. Ref. Nom. Min. H Ref. Thread T Hex Y Ref. -4 E29572E UNJF-3B E29572G UNJF-3B E29572H UNJF-3B E29572J UNJF-3B E UNJ-3B Nom. Wt. (lbs) w/socket -4 E29574E UNJF-3B E29574G UNJF-3B E29574H UNJF-3B THRE T E29574J UNJF-3B E UNJ-3B E29576E UNJF-3B THRE T *Nipple assembly part number does not include socket -6 E29576G UNJF-3B E29576H UNJF-3B E29576J UNJF-3B E UNJ-3B psi Hose ssemblies - Flareless to Flareless B Sizes ssembly Nipple Nipple B Socket -4 thru E29572 E29572 E thru E29572 E29574 E thru E29572 E29576 E thru E29574 E29574 E thru E29574 E29576 E thru E29576 E29576 E ETON ORPORTION erospace TF ecember 2007
5 E319 Fittings and Hose ssemblies 3000/4000psi rcseal Fitting imensions Size *Nipple ssembly Max. Ref. Nom. Min. H Thread T Hex Y Ref. -4 E31640E UNJS-3B E31640G UNJS-3B E31640H UNJS-3B Nom. Wt. (lbs) w/socket Straight THRE T -10 E31640J UNJS-3B E UNJ-3B ** E31640M UNJS-3B E31641E UNJS-3B E31641G UNJS-3B THRE T -8 E31641H UNJS-3B E31641J UNJS-3B E UNJ-3B ** E31641M UNJS-3B E31642E UNJS-3B E31642G UNJS-3B E31642H UNJS-3B THRE T 90 *Nipple assembly part number does not include socket -10 E31642J UNJS-3B E UNJ-3B ** E31642M UNJS-3B /4000psi Hose ssemblies - rcseal to rcseal B Sizes ssembly Nipple Nipple B Socket -4 thru -16** 246 E31640 E31640 E thru -16** 247 E31640 E31641 E thru -16** 248 E31640 E31642 E thru -16** 249 E31641 E31641 E thru -16** 250 E31641 E31642 E28571 ** -16 is only rated at 3000 psi -4 thru -16** 251 E31642 E31642 E28571 ETON ORPORTION erospace TF ecember
6 E355 Standard uty Hose 3000/4000psi Operating Pressure Hose ata Size O.. Tube Size (in) Hose I.. minimum (in) Hose O.. maximum (in) Max. Operating Pressure (psi) 3000/ / / /4000 Proof Pressure (psi) Min. High Temp. Burst Pressure (psi) 12,000 12,000 12,000 12,000 Min. Room Temp. Burst Pressure (psi) 16,000 16,000 16,000 16,000 Minimum 3000 psi Bend Radius (in) Minimum 4000 psi Bend Radius (in) Nominal Weight per Inch (lbs) Temperature Range: -65 F to +275 F (-54 to +135 ) onstruction: Extruded, conductive Teflon inner tube, with one (-4 through -8 sizes) or two (-10 size) layers of full-coverage evlar reinforcement and a full-coverage black polyester outer braid. Industry Specifications: Meets the requirements of SE specification S1975 for 3000/4000 psi operation. Listed on PRI/QPL S1975. F pprovals: ll sizes are certified to TSO-75, Type II-B-S/P. 6 ETON ORPORTION erospace TF ecember 2007
7 E355 Fittings and Hose ssemblies 3000/4000 psi Flareless Fitting imensions Size *Nipple ssembly Max. Ref. Nom. Min. H Ref. Thread T Hex Y Ref. -4 E32631E UNJF-3B E32631G UNJF-3B Nom. Wt. (lbs) w/socket Straight THRE T -8 E32631H UNJF-3B E32631J UNJF-3B E32894E UNJF-3B THRE T -6 E32894G UNJF-3B E32894H UNJF-3B E32894J UNJF-3B E32646E UNJF-3B THRE T *Nipple assembly part number does include socket -6 E32646G UNJF-3B E32646H UNJF-3B E32646J UNJF-3B /4000 psi Hose ssemblies - Flareless to Flareless (S1975) B Sizes Fitting Fitting B 3000psi ssembly 4000psi ssembly S4568/S thru -10 E32631 E S4569/S thru -10 E32631 E S4570/S thru -10 E32631 E S4571/S thru -10 E32894 E S4572/S thru -10 E32894 E S4573/S thru -10 E32646 E ETON ORPORTION erospace TF ecember
8 E355 Fittings and Hose ssemblies 3000/4000psi rcseal Fitting imensions Size *Nipple ssembly Max. Ref. Nom. Min. H Thread T Hex Y Ref. -4 E36553E UNJS-3B Nom. Wt. (lbs) w/socket Straight THRE T -6 E36553G UNJS-3B E36553H UNJS-3B E36553J UNJS-3B E37200E UNJS-3B E37200G UNJS-3B E37200H UNJS-3B THRE T -10 E37200J UNJS-3B E37225E UNJS-3B E37225G UNJS-3B E37225H UNJS-3B THRE T E37225J UNJS-3B *Nipple assembly part number does include socket 3000/4000 psi Hose ssemblies - rcseal to rcseal S1975) B Sizes Fitting Fitting B 3000psi ssembly 4000psi ssembly S4574/S thru -10 E36553 E S4575/S thru -10 E36553 E S4576/S thru -10 E36553 E S4577/S thru -10 E37200 E S4578/S thru -10 E37200 E S4579/S thru -10 E37225 E ETON ORPORTION erospace TF ecember 2007
9 E334 Hose 5000psi/ 5080psi Operating Pressure Hose ata Size O.. Tube Size (in) Hose I.. minimum (in) Hose O.. maximum (in) Max. Operating Pressure (psi) Proof Pressure (psi) 10,160 10,160 10,160 10,160 10,160 10,160 Min. High Temp. Burst Pressure (psi) 17,000 17,000 17,000 17,000 15,240 15,240 Min. Room Temp. Burst Pressure (psi) 20,320 20,320 20,320 20,320 20,320 20,320 Minimum Bend Radius (in) Nominal Weight per Inch (lbs) Temperature Range: -65 F to +275 F (-54 to +135 ) onstruction: Extruded, conductive Teflon inner tube, with two (-4 through -6 sizes), or three (-8 through -16 sizes) layers of full-coverage evlar reinforcement and a full-coverage black PBI/ evlar outer braid. Industry Specifications: Sizes -4 through -10 meet the performance requirements of MIL-H for 5000 psi operation. Sizes -4 through -16 are qualified to S5951 for 5080 psi pressures and are listed in PRI/QPL for S5951, and qualified to irbus spec BS1335. ETON ORPORTION erospace TF ecember
10 E334 Fittings and Hose ssemblies 5080psi Flareless Fitting imensions Size *Nipple ssembly Max. Ref. Nom. Min. H Ref. Thread T Hex Y Ref. Nom. Wt. (lbs) w/socket -4 E61342E UNJEF-3B E61342G UNJEF-3B E61342H UNJEF-3B E61342J UNJEF-3B Straight THRE T -12 E UNJEF-3B E61342M UNJ-3B E61344E UNJEF-3B E61344G UNJEF-3B E61344H UNJEF-3B E61344J UNJEF-3B THRE T -12 E UNJEF-3B E61344M UNJ-3B E61346E UNJEF-3B E61346G UNJEF-3B THRE T *Nipple assembly part number does not include socket -8 E61346H UNJEF-3B E61346J UNJEF-3B E UNJEF-3B E61346M UNJ-3B psi Hose ssemblies - Flareless to Flareless (S5951) B Sizes ssembly Nipple Nipple B Socket S thru E61342 E61342 E29050E E61044G-M S thru E61342 E61344 E29050E E61044G-M S thru E61342 E61346 E29050E E61044G-M S thru E61344 E61344 E29050E E61044G-M S thru E61344 E61346 E29050E E61044G-M S thru E61346 E61346 E29050E E61044G-M 10 ETON ORPORTION erospace TF ecember 2007
11 How to omplete Hose ssembly Part Numbers The part numbers shown here represent standard configurations of E319 Hose with materials, markings and cleaning requirements conforming to the related military or aerospace standards as they apply. If your requirements differ from these standards, the hose assemblies you order will be assigned new customer specific part numbers by Eaton. To order E355 or E344 Hose ssemblies, you should use the S part numbers. Example of Eaton Part Number 129H S S U Base Part Number and Hose Size ode Use - if Sleeve is Not Required B = Shrink-on brasion Sleeve Length of ssembly in Inches Fraction of an Inch in Eighths R - Step own One Size Straight Fitting S - Hose Size { E - Step Up One Size 90 Fitting Lockwire Holes U-Two Lockwire Holes W-Three Lockwire Holes Leave haracter Space Blank if Lockwire Holes are Not Required ngle in degrees Example of Eaton Part Number 139H U 270 Base Part Number and Hose Size ode Meausre angle counter-clockwise EN VIEW On assemblies with an elbow fitting on each end, measure the orientation angle as shown above. dd the angle measurement as a suffix to the base part number. In all cases, the angle should be expressed in 3 digits. For example, 90 should be written 090. If the angle desired is 0, specify 000. Use - if Sleeve is Not Required B = Shrink-on brasion Sleeve Length of ssembly in Inches Fraction of an Inch in Eighths Lockwire Holes U-Two Lockwire Holes W-Three Lockwire Holes Use - if Lockwire Holes are Not Required Orientation ngle The length for flareless hose assemblies can be measured to the end of the nipple or to the gauge point, as referenced in NS1760. When defining the part number length, use the length between the gauge points. The dimension shows the distance between the end of the nipple and the gauge point (reference pages 4, 5 and 8). This part number format is consistent with the SE S part number format. Hose Size Letter ode E G H J M ETON ORPORTION erospace TF ecember
12 Eaton orporation erospace Operations 3 Park Plaza, Suite 1200 Irvine, Phone: (949) Fax: (949) Eaton orporation onveyance Systems ivision 300 South East venue Jackson, Michigan Phone: (517) Fax: (517) Eaton orporation onveyance Systems ivision Route 2 Box 361 Meadowbrook Road Eastanollee, Georgia Phone: (706) Fax: (706) Eaton orporation onveyance Systems ivision Old Baltimore Pike Beltsville, Maryland Phone: (301) Eaton orporation onveyance Systems ivision 15 Pioneer ve. Warwick, Rhode Island Phone: (401) Eaton orporation onveyance Systems ivision 671 W. 17th Street osta Mesa, alifornia Phone: (949) Fax: (949) Eaton LT onveyance Systems ivision Broad Ground Road Lakeside Redditch Worcs B98 8YS England Phone: (44) Fax: (44) Eaton S.. onveyance Systems ivision 2 Rue Lavoisier BP oignieres, France Phone: (33) Eaton LT onveyance Systems ivision hemin e Pau Serres-astet France Phone: (33) Fax: (33) Eaton LT onveyance Systems ivision Posttach 1026 arl -Benz-Strasse Gilching Germany Phone: 49 (0) Fax: 49 (0) Vickers Systems Pte Ltd onveyance Systems ivision Lot 512, Jalan elima, Batamindo Industrial Park Batam 29433, Indonesia Phone: (62) Eaton orporation Teflon and evlar are a registered trademarks of upont. ll Rights Reserved Printed In US opying or Editing is Forbidden Form No. TF (supersedes 173) ecember 2007
Kevlar Reinforced High Pressure PTFE Hose Assemblies AE319, AE334, AE355
eroquip evlar Reinforced High Pressure PTFE Hose ssemblies E319, E334, E355 Lightweight Integral brasion Resistance Qualified to Industry Standards ompatible with erospace Fluids vailable for 3000, 4000
More informationAA w -tugq0 173 AEROSPACE ENGINEERING BULLETIN. KEVLAR Reinforced High Pressure Teflon Hose Assemblies
DO ( AA w -tugq0 173 AEROSPACE ENGINEERING BULLETIN * A o 1 i: :00 KEVLAR Reinforced High Pressure Teflon Hose Assemblies... ~~~~~~~~~~~~~~~~~~~~~~ M -L. * * Light Weight * Integral Abrasion Resistance
More informationAeroquip. Aluminum Compression Crimp Fittings
Aeroquip Aluminum Compression Crimp Fittings Table of Contents 666/667 Medium Pressure PTFE Hose and Aluminum Compression Crimp Fittings... 2 Aluminum Crimp Fittings... 3 Flared Fittings... 4 Flared Fitting
More informationRubber Hose, Fittings & Assemblies for Aerospace Applications
Aeroquip Brand Rubber Hose, Fittings & Assemblies for Aerospace Applications Light Weight and Flexible Qualified to Industry Standards Table of Contents 306 Low Pressure Hose, Fittings and Assemblies 1
More informationAerospace Standard Tube Size and Variable Diameter V-Band Couplings. Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant
Aerospace Standard Tube Size and Variable Diameter V-Band Couplings Simplified Stock Long Life Vibration Proof Numerous Sizes Corrosion Resistant V-Band Couplings Standard Tube Size and Variable Diameter
More informationConvoluted Teflon Hose
eroquip E645 Nomex Reinforced onvoluted Teflon Hose Lightweight Meets performance requirements of S1227 50% tighter bend radius Improved flexing characteristics Table of ontents Weight omparison 3 E645
More informationAeroquip Brand 145/155 Series Hydraulic Self Sealing Coupling
Aeroquip Brand 145/155 Series Hydraulic Self Sealing Coupling Fully interchangeable with all fielded 's Aeroquip brand 145/155 Series Couplings and is the only approved coupling to SAE AS5440 Table of
More informationAeroquip 3,000 psi Teflon Hose and Hose Assemblies
Aeroquip 3,000 psi Teflon Hose and Hose Assemblies Lightweight Meets performance requirements of AS1339 50% tighter bend radius Improved flexing characteristics Weight savings Table of Contents 3 AE246
More informationAerospace Fluid Conveyance
Aerospace LJ11 and J11 Joints LJ11 and J11 Joints LJ11 and J11 Joints were designed primarily to join standard tubing for fuel, hot air and gas systems. The substitution of couplings other than the coupling
More informationCarter Ground Fueling Underwing Refueling Nozzle Model 64349
Carter Ground Fueling Underwing Refueling Nozzle Model 64349 Design Concepts s Carter brand is the leading manufacturer of nozzles qualified in accordance with SAE AS5877 (MIL-N-5877). Model 64349H underwing
More informationCarter Ground Fueling Pressure Refueling Nozzle Model 64348
Carter Ground Fueling Pressure Refueling Nozzle Model 64348 Design Concepts Eaton s Carter Model 64348 underwing fueling nozzle has been used world-wide in the aircraft fueling industry for many years.
More informationCarter Ground Fueling Underwing Refueling Nozzle Model 60427
Carter Ground Fueling Underwing Refueling Nozzle Model 60427 Design Concepts Eaton s Carter brand Model 60427 underwing nozzle is utilized world-wide by more companies and at more airports than any other
More informationCarter Ground Fueling Underwing Refueling Nozzle Model 64250
Carter Ground Fueling Underwing Refueling Nozzle Model 6450 Design Concepts s Carter brand offers several standard underwing nozzles. Until recently, the latest technology has been Model 6400 pressure
More informationFluid Conveyance. Aeroquip Brand Rynglok Tube Repair System
Aeroquip Brand Rynglok Tube Repair System The proven tube fitting performance standard The system of choice for aerospace hydraulic tubing repair Approved by Boeing, Airbus, major airlines, and all branches
More informationAerospace. Light Weight and Flexible Qualified to Industry Standards. Fluid Conveyance
Aerospace Aeroquip Brand Rubber Hose, ittings & Assemblies for Aerospace Applications Light Weight and lexible Qualified to Industry Standards Table of Contents 306 Low Pressure Hose, ittings and Assemblies
More informationCarter Ground Fueling Pressure Refueling Nozzle Model 64348
Carter Ground Fueling Pressure Refueling Nozzle Model 6448 Design Concepts s Carter Model 6448 underwing fueling nozzle has been used world-wide in the aircraft fueling industry for many years. It includes
More informationWire Reinforced Synthetic Rubber Hose Assemblies
Aeroquip Wire Reinforced Synthetic Rubber Hose Assemblies Lightweight and Flexible Qualified to Industry Standards Integral Abrasion and Fire Resistance Covers Available Aeroquip Wire Reinforced Synthetic
More informationFluid Conveyance. Ultra Low Pressure Drops Leak-free Metal to Metal Sealing Withstands Large Range of Temperatures Long Life
TF100-18 Aeroquip Brand Aerocheck Hydraulic Directional Control Valves Ultra Low Pressure Drops Leak-free Metal to Metal Sealing Withstands Large Range of Temperatures Long Life Patent Pending Table of
More informationAerospace Fluid Conveyance
Aerospace Aeroquip Brand Bleed Air Ducting Components Capabilities Eaton Aerospace products are designed, engineered and manufactured to the strictest quality standards in the industry... our own. Computer
More informationAerospace. Aeroquip Brand Ultra-Mate Couplings. Patent 6,557,824
Aerospace Aeroquip Brand Ultra-Mate Couplings The Ultimate in Push-Pull Couplings Self-Seal, Self-Locking Couplings Automatic Pull-Home Valve Sleeve Tactile Locking Pins Vacuum to 5000 psi Patent 6,557,824
More informationRubber Hose, Fittings & Assemblies for Aerospace Applications
Aeroquip Rubber Hose, Fittings & Assemblies for Aerospace Applications Lightweight and Flexible Qualified to Industry Standards Table of Contents 306 Low Pressure Hose, Fittings and Assemblies 1 303, 302A
More informationBRAIDED HOSE WT/1/ HOSE OD (MAX)
TITEFLEX RA170 (220 SERIES) SERI ES: 220 SPECIFICATION: SAE AS1975, Class 3000 BRAID: Kevlar INNERCORE: PTFE Smoothbore QUALIFICATIONS : SAE AS1975, Class 3000 TSO-C75 Type II-S/P TSO-C75 Type IIB-S/P
More informationAerospace. Centurion Brand Mechanical Seals
Aerospace Centurion Brand Mechanical Seals Eaton s Centurion Brand Mechanical Seals The Advantages of Choice Eaton s Aerospace Operations offers the most diverse line of mechanical seals and sealing components,
More informationAeroquip Low Profile Self Sealing Couplings. Series 2000 Series 2001
Aeroquip Low Profile Self Sealing Couplings Series 2000 Series 2001 Low Profile Self Sealing Couplings 2000 and 2001 Opposed Poppet Series 2000 Series Couplings Qualified to Type I, Class A and Type II,
More informationAeroquip Series 1965 & 2055 Low Profile Push-Pull Quick Disconnect Couplings
f Aeroquip Series 1965 & 2055 Low Profile Push-Pull Quick Disconnect Couplings Speeds Maintenance and Provides Safety and Reliability for Aircraft Hydraulic and Coolant Systems Series 1965 & 2055 Quick
More informationCarter Pressure Loss Compensator and Venturis. Model Model Model Model Model 64086
Carter Pressure Loss Compensator and Venturis Model 60559 Model 64088 Model 64085 Model 64193 Model 64086 esign Concepts Eaton s Carter product line includes Model 60559 Pressure Loss Compensator and a
More informationAeroquip 145/155 Series Hydraulic Self Sealing Coupling
Aeroquip 145/155 Series Hydraulic Self Sealing Coupling Fully interchangeable with all fielded Eaton's Aeroquip 145/155 Series Couplings and is the only approved coupling to SAE AS5440 Table of Contents
More information100R5. Features 100R5-style crimp fittings from Eaton complement the company s industryrecognized, reusable fitting line.
E R O Q U I P I N N O V T I O N S 100R5 CRIMP FITTINGS Features 100R5-style crimp fittings from Eaton complement the company s industryrecognized, reusable fitting line. eroquip 100R5 fittings are a low-cost,
More informationAerospace Capabilities. Flying Safely and Efficiently with Eaton
Aerospace Capabilities Flying Safely and Efficiently with At, our job is creating the world s best aerospace products and technologies for commercial, military and business aircraft. views each customer
More informationAeroquip 1817 Series Ball Bearing Swivel Joints
Aeroquip 1817 Series Ball Bearing Swivel Joints Table of Contents Features and Capabilities...3 3000 PSI Swivel Joints with Flared and Flareless Ends... 3 5 3000 PSI Swivel Joints with Beam Seal Ends...6
More informationAerospace Capabilities. Component Excellence... Superior Systems
Aerospace Capabilities Component Excellence... Superior Systems Eaton s Aerospace Business Component Excellence Superior Systems Today, Eaton s aerospace business is the premier innovator and one of the
More informationAeroquip Sure-Mate Couplings
Aeroquip Sure-Mate Couplings Positive locking fingers Blunt start ACME threads for easy connection Lighter weight compared to previous thread-together couplings Low pressure drop across the connector Minimal
More informationHydraulic Twin Tough 711 A TC A ST A TC A-14. 4,000 psi Constant W.P. 772TC A ST A A TC A-16
Constant Hydraulic Industry Standard Suction and Return Push-Lok Phosphate Ester Low Temperature Transportation lternative/marine Fuel Refrigerant Hose Hose visual index Constant Hose 451TC -10 451ST -10
More informationR270 (510 SERIES): TITEFLEX R270 (510 SERIES) ENGLISH
TITEFLEX R270 (510 SERIES) SERI ES: 510 SPECIFICATION: None BRAID: Nomex INNERCORE: PTFE Convoluted QUALIFICATIONS : Qualified specific requirements. R270 (510 SERIES): 510 Series: low-pressure PTFE hose
More informationAeroquip Ultra-Mate Couplings
Aeroquip Ultra-Mate Couplings The Ultimate in Push-Pull Couplings Self-Seal, Self-Locking Couplings Automatic Pull-Home Valve Sleeve Tactile Locking Pins Vacuum to 5000 psi Patent 6,557,824 2 EATON Aerospace
More informationAeroquip Series 1800 & 1801 Low Profile Ratchet Lock Couplings. Lightweight Self-Sealing Compact Design Minimum Pressure Loss
Aeroquip Series 1800 & 1801 Low Profile Ratchet Lock s Lightweight Self-Sealing Compact Design Minimum Pressure Loss Aeroquip Low Profile Ratchet Lock s, Caps and Plugs 1800 and 1801 Series Lightweight,
More informationAeroquip Sure-Mate Couplings
Aeroquip Sure-Mate Couplings Positive locking fingers Blunt start ACME threads for easy connection Lighter weight compared to previous thread-together couplings Low pressure drop across the connector Minimal
More information421WC A A-9 AX A-9 482TC A-10. Tough Cover SAE 100R1 TYPE AT 482ST A-10 BXX A A A-11
atalog 4400 US Hydraulic Visual Index 601-8 422-8 424-8 Hydraulic Hydraulic 421W -9 426-9 X -9 482T -10 S 100R1 TYP T Protective Wire over S 100R3 High Temperature S 100R1 TYP T Worldwide ISO 1436-1 TYP
More informationAerospace Capabilities. Component Excellence... Superior Systems
Aerospace Capabilities Component Excellence... Superior Systems Eaton s Aerospace Business Component Excellence Superior Systems Today, Eaton s aerospace business is the premier innovator and one of the
More information6LGH High Voltage Connectors
LGH High Voltage onnectors 6-Pin, Subminiature Rectangular onnectors Product acts xtremely lightweight total weight of mated pair is less than 14 grams ompact design requires less than.6 square inch [387
More informationAeroquip 3200 Series Self-Sealing Quick Disconnect
Aeroquip 3200 Series Self-Sealing Quick Disconnect 3200 Series Quick Disconnect Eaton s Aeroquip Brand 3200 Series Self-Sealing Coupling is a reliable quick disconnect for 3000 psi (2068.42 kpa) aircraft
More informationAerospace Parts Catalogue 2
Werthenbach Aerospace GmbH Page 1 Table of Content 1. Quick Disconnect s... 3 1.1. APPLICATION GUIDE... 4 1.1.1. AEROQUIP SERIES 145/155 SERIES HYDRAULIC SELF SEALING COUPLINGS... 4 1.1.2. AEROQUIP SERIES
More informationPiston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 2012 New Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-5 Series 3000 Race Hose Ends Page 6-8 Series 3000 Direct-Fit Hose Ends
More informationDETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II
INCH-POUND 08 December 2009 DETAIL SPECIFICATION SHEET COUPLING HALF, HOSE ATTACHMENT, HYDRAULIC, SELF-SEALING, GROUND SUPPORT, QUICK DISCONNECT, TYPE I AND TYPE II This specification is approved for use
More informationIndustrial Welded Cylinders
Industrial Welded ylinders Technical Manual Series WH Table of ontents Design Features and Specifications...2 How to Order...3 WH Mounting Dimensions...4 Rod End Styles...7 Technical Data...8 Design Features
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationHOSE, TUBE & CONNECTION FITTINGS CATALOGUE. JSG Industrial Systems quality industry solutions. Fire Suppression Systems. Flow Measurement Systems
HOSE, TUBE & CONNECTION FITTINGS CATALOGUE JSG Industrial quality industry solutions Lubrication Management Material Dispensing Management Hose & Cable Management Diesel & Fluid Management Fire Suppression
More informationHi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
More informationInternal Roller Swage Tooling & Equipment
Internal Roller Swage Tooling & Equipment Table of Contents Roller Swage Machines... 1-2 Tube Expanders... 3 Jaw Sets... 4 Roller Swage Assemblies & Components... 5 Installation Sequence... 6 Roller Swage
More informationEXTERNALLY SWAGED FITTING
EXTERNALLY SWAGED FITTING DESIGN CONCEPT The Externally Swaged fitting was originally developed by McDonnell Douglas (prior to become Boeing) who granted the manufacturing authority to Airdrome Precision
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Series 2000 Pro-Flow Race Hose Ends Page 3-4 Series 3000 Race Hose Ends Page 5-7 Series 3000 Direct-Fit Hose Ends Page 8-9 Premium Black
More informationPerformance Products
Performance Products INTRODUCTION INTRODUCTION Eaton s eroquip Performance Product brand of hose and fittings continues to prove there is a difference in performance plumbing products. Our long tradition
More informationLJ11 and J11 Joints. LJ11 and J11 Joint Specifications and Dimensions. T-bolt Latch Coupling. Joint
LJ11 and J11 Joints LJ11 and J11 Joints LJ11 and J11 Joints were designed primarily to join standard tubing for fuel, hot air and gas systems. The substitution of couplings other than the coupling part
More informationPiston Accumulators Series Catalog /USA Page
atalog 1630-7/US Page Piston ccumulators Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring
More informationEaton EC inch 6-spiral hose
Eaton EC466-40 2.5 inch 6-spiral hose Eaton s EC466-40 powers the most demanding application Eaton s EC466-40 2.5 inch high pressure 6-spiral hose combined with the 1W series fitting, which incorporates
More informationTABLE OF CONTENTS 8000 SERIES RACE HOSE ENDS 3000 SERIES RACE HOSE ENDS
TABLE OF CONTENTS Technical Specifications & Torque Table Page 2 Featured Products Page 3 Series 2000 Pro-Flow Race Hose Ends Page 4-8 Series 2000 Expander Hose Ends Page 7 Series 2000 Reducer Hose Ends
More informationTutorial, Introduction & Benefits PTFE Hose Assembly & Fittings Nomenclature SAE 100R14A Hose
PTF & PTF & Table of ontents ydraulic & & Fit. Tutorial, Introduction & enefits... 130-131 PTF ssembly & Nomenclature... 132 PTF & Smooth ore 919 S 100R14... 133 919 S 100R14 (Static-Dissipative )... 133
More informationAeroquip TEB 169. Hose Shop. Assembly Equipment. & Price List
Aeroquip TEB 169 Hose Shop Assembly Equipment & Price List Table of Contents Section I Hose Assembly Equipment Electrical Options 1 Hose Assembly Equipment Options 2-7 Option 1 (Basic) 2-3 Option 2 (Intermediate)
More informationQUALITY HYDRAULIC PRODUCTS
QUALITY HYDRAULIC PRODUCTS N.R.P. ISO9001 Certified Quality System NRP- JONES Has What it Takes to Build Your Business! Over a half-century of experience helps you build customer satisfaction while increasing
More informationquality industry solutions
quality industry solutions JSG Industrial Systems HOSE, TUBE & CONNECTION FITTINGS CATALOGUE 2017 JSG INDUSTRIAL SYSTEMS Since its inception in 1968, JSG Industrial Systems has been a proud supplier of
More informationSTRATO-THERM Terminals and Splices for High Temperature Applications
atalog 1308940 Introduction Product Facts Product available in temperature ranges of 500 F [260 ], 550 F [288 ], 650 F [343 ] and 1200 F [649 ] Product employs the famous and crimp ide range of wire sizes
More informationPressure Gauge Kit and Test Couplings
Pressure Gauge Kit and Test Couplings Overview The Eaton pressure gauge kit and screw together test couplings provide accurate and efficient pressure control and monitoring of your hydraulic system, while
More informationEngineered. Tested. Qualified.
EXPERIENCE THE DIFFERENCE I N T R O D U C T I O N Engineered. Tested. Qualified. Over the years our customers have experienced a difference in quality, industry support, depth of product line, and customer
More informationAIRCRAFT APPLICATIONS
Schatz Bearing orporation AIRRAFT APPLIATIONS A leading producer of high-quality ball bearings and motion control products. ontrol Ball Bearings Precision Ball Bearings ustom Ball Bearings all Toll Free
More informationSnap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage
Snap-tite Quick Disconnect Couplings for Applications Requiring Virtually No Air Inclusion or Spillage 8- Series For Pressures to 0 psi ( bar) 9 Series For Pressures to 0 psi ( bar) Featuring: Low pressure
More informationSV321 & SV Way Normally Closed and Normally Open Pilot Operated Solenoid Valves
SV321 & SV421 2-Way and Pilot Operated Solenoid Valves Valcor General Purpose Series ESRIPTION pplication Features These 2-way piloted diaphragm solenoid valves are available in normally closed and normally
More informationA N Fittings versus JI C Fittings
A N Fittings versus JI C Fittings A N Fittings : AN fittings are a flare fitting, using 37 flared tubing to form a metal-metal seal. The A N thread is a particular type of fitting used to connect flexible
More informationCarbon or stainless Steel
For Technical Assistance and Sales Contact: FlexEJ Ltd Tel: +44 (0) 1384 881188 Email: sales@flexej.co.uk Fax: +44 (0) 1384 896875 Web: www.flexej.co.uk Section 6 FLEXIBLE HOSES TYPE FSH SERIES METALLIC
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationFLUOR-O-FLO Dip Pipes & Spargers. PTFE Lined and Jacketed Steel
MICROMOLD TM ENGINEERED PLASTIC FLUID-FLOW PRODUCTS Product Specifications 5.1-2 FLUOR-O-FLO Dip Pipes & Spargers PTFE Lined and Jacketed Steel CONTENTS PAGE DDF Double d Dip Pipes... 2 DSF Single d Dip
More informationPiston Accumulators Series Catalog HY /US
Series 3000 Series 3000 Heavy uty Service with 3000 PSI Operating Pressure 2" thru 12" ores with Over 50 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End onstruction Five Standard
More informationSolenoid Valves. Poppet and Spool type solenoid actuated valves for applications up to 350 bar (5000 psi) and 227 L/min (60 USgpm) A-1.
Solenoid Valves Poppet and Spool type solenoid actuated valves for applications up to 5 bar (5 psi) and 7 L/min (6 USgpm) n Eaton Brand ETON Screw-In Cartridge Valves E-VLSC-MC-E November 9 -. Solenoid
More informationDETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT
INCH-POUND 16 February 2010 SUPERSEDING AN818 Rev 19 15 June 1994 DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT This specification is approved for use by all Departments and Agencies of the Department
More informationFlexmaster Joints. MatchMate Plus. Textile braid Wire inserted suction Special application. 40, 43, Convoluted PTFE Engine and air brake
INDEX Section Pages Hose Section 15-67 Fittings 68-180 Adapters and Tube Fittings 181-228 Pages Section Pages Swivel Joints 229-244 Quick Disconnect Couplings 268-345 Flexmaster Joints 245-260 Access.,
More informationHigh Performance Butterfly Valves 2 Way Way 2-20 Bray MK Series High Performance Butterfly Valves ANSI Class 150 and 300
ray MK Series High Performance utterfly Valves NSI lass 10 and 00 High Performance utterfly Valves 2 Way 2 20 Way 2 20 /2/1 The ray Mcannalok MK Series high performance butterfly valves set the quality
More informationISO ISO ISO A A TC A-18 Constant Working Pressure Hose ISO 18752
onstant Hydraulic Industry Standard Suction and Return Push-Lok Phosphate ster Low Temperature Transportation lternative/marine Fuel Refrigerant Hose Hose visual index 387-13 487-14 722-15 Globalore ISO
More informationAmphenol. Amphenol GT Series Reverse Bayonet Coupling Connectors. Ruggedized Connector Series for Rail/Mass Transit and other Harsh Environments
mphenol eries everse ayonet oupling onnectors 12-024-8 uggedized onnector eries for ail/ass ransit and other arsh nvironments mphenol able of ontents age o. mphenol eries eversed ayonet oupling onnectors
More informationMIL-PRF QPL Connectors MIL-PRF QPL Adapters Online Catalog Volume 1
MIL-PRF-39012 QPL onnectors MIL-PRF-55339 QPL dapters Online atalog Volume 1 Delta QPL connectors and adapters meet or exceed all requirements of MIL-PRF-39012 and MIL-PRF-55339. ecause these specifications
More informationPerformance Products 2013 HOSE & FITTINGS. Unit 8/2 Carson Rd Malaga, WA 6090 Phone: Fax:
HOSE & FITTINGS Performance Products 2013 19 Performance Products Unit 8/2 Carson Rd Malaga, WA 6090 Phone: 92489994 Fax: 92489995 www.couplers.com.au Thread Sizes THREAD Performance Products typically
More information4S/6S Eaton s high performance spiral hose fitting design with DURA-SEAL technology
eroquip / Spiral ose Fittings / aton s high performance spiral hose fitting design with UR-SL technology Class 0 Cool-own leakage Superior corrosion resistance ose/fitting identification program aton's
More informationHEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE
HEBEI QIANLI RUBBER PRODUCTS CO., LTD. HIGH PRESSURE RUBBER HOSE About the company Customer oriented supplier HEBEI QIANLI RUBBER PRODUCTS CO., LTD. is a technical company, which focus on researching,
More informationMK Series High Performance Butterfly Submittal/Technical Data
MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas 77041
More informationFive Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system.
Five Hoses. Two Fittings. One Solution. GLOBALCORE The world s first high-performance, cohesive hose and fitting system. Five Hoses. Two Fittings. One Solution... Providing a simple solution of robust
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationCopper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)
Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes
More informationDurco. Microfinish and General Purpose Threaded BallValves. Ball Valves To Suit All Needs. Bulletin VM-65d
P R E S E N T I N G T H E N E W urco Microfinish and General Purpose Threaded allvalves all Valves To Suit ll Needs ulletin VM-65d Rugged NSI 16.34 esign or Severe Service urco Microfinish ball valves
More informationBC SERIES CHECK VALVE
SERIES HEK VLVE Soft ubble Tight 1/2 psi racking Pressure NR Standard (Viton Optional, use Suffix V) Lead Free option, use suffix LF omplies with alifornia 1953 Max Working Pressure 1/4 thru 400 psi WOG
More informationDETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT
INCH-POUND 19 August 2014 SUPERSEDING w/amendment 1 23 January 2013 DETAIL SPECIFICATION SHEET NUT, TUBE COUPLING, SHORT This specification is approved for use by all Departments and Agencies of the Department
More informationHOSE & HOSE PROTECTION
ALL YOU CAN EXPECT AND MORE Think about Hydraulics Differently Quality European Hose SECTION A HOSE INDEX 1 Hydraulic Hose HOSE & HOSE PROTECTION 1SN - SAE R1 AT - 1 Wire Thin Cover Hose 1SN - 1 Wire Thin
More informationHOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
More informationCarter Underwing Refueling Nozzle. Model 64349
Carter Underwing Refueling Nozzle Model 64349 Design Concepts Eaton s Carter product line is the leading manufacturer of nozzles qualified in accordance with SAE AS5877 (MIL-N-5877). Eaton s Carter Model
More informationAmphenol Aerospace. Accessories Contact Terminating Tools For MIL-DTL Connectors III HD Dualok II I SJT Accessories Aquacon Herm/Seal PCB
ccessories ontact Terminating Tools For ML-TL- onnectors mphenol erospace ontact nsertion Tools ontact mphenol/ nsertion Tool Mil. olor ode nsertion Tool Replacement Tip & Pin mphenol/ Mil. 20 ZZL-R-9510--20
More information451TC/ST, 451TC Twin Tough
Hydraulic Hose: 451T/ST onstant : 3000 PSI atalog 4400 US HYRULI 451T/ST, 451T Twin Tough Parker 451T and 451ST hydraulic hoses are what to specify when abrasion resistance and ease of use are required.
More informationCONTI ALLCRETE WIRE High quality hoses for high pressure concrete lines
CONTI ALLCRETE WIRE High quality hoses for high pressure concrete lines CONTI ALLCRETE WIRE is the perfect hose for the use in concrete and soild pumps. With its extruded smooth bore tube, made of highly
More informationTemperature Sensors. How to Order Consult factory for pricing and lead time. Normally Open (Closed on temperature rise)
Temperature Sensors 0916 Normally Open (losed on temperature rise) ontact Rating 6 MPS T 120 V 4 MPS T 240 V Voltage 0.1 to 240 volts or 12 VD 8 MPS, 24 VD 4 MPS Pressure 1,000 PSI operating Material 303
More informationESD-Safe Material Handling Products
ESD-Safe Material Handling Products The material matters in material handling MFG Tray ESD-safe conductive products have a surface resistivity of
More information... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
More information0 to 100 up to 0 to PSI (gage) Packard Electric Metri-Pack 150 Series, M12-4 Pole* 1/4-18 NPT ma, VDC, 0-5 VDC, 0-10 VDC
Data Sheet PTA5000 Hermetically Sealed Modular Pressure Sensor Main Features Pressure Ranges Electrical Connection Pressure Connection 0 to 100 up to 0 to 10.000 PSI (gage) Packard Electric Metri-Pack
More informationPipe/Conduit Clamps & Hangers
Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories
More information