Industrial Tube Fittings and Adapters

Transcription

1 Industrial Tube Fittings and Catalog 4300-JD October 2010

2 WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice. Copyright 2010, Parker Hannifin Corporation, All Rights Reserved Offer of Sale The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale. ii Parker Hannifin Corporation

3 Table of Contents Page Number How to Order... 4 Seal-Lok O-Ring Face Seal Tube Fittings... 5 Triple-Lok 37 Flare Tube Fittings and Pipe Fittings and Port Pipe Swivels Hydraulic Flanges Bin Kits and Thread ID Tools Appendix A: PMH Part Numbers Appendix B: Alphanumeric Index Offer of Sale Parker Hannifin Corporation

4 PRODUCT SPOTLIGHT The latest from Parker, still your fitting authority. Trap-Seal innovative O-ring enhancement At Parker, we never stop pursuing perfection. We re always working to further assure leak-free performance and make components maintain their like-new integrity longer. The results are advanced connection enhancements, or ACEsolutions. Starting with exclusive innovations like these, we're continuing to set new standards in performance and savings for you. Robust Port Stud improved SAE adjustable port stud The Robust Port Stud allows for easier, mistake-proof installation in the field and eliminates the potential for backup washer damage that can lead to leaks. n Longer locknut provides more area to wrench, while keeping the threads covered n No need to retrofit any parts functional dimensions are same as current SAE adjustable connectors Just three basic assembly steps ensure that it's done right the first time: Thread the connector into the port. Back it off to align the tube end. Tighten the locknut. Triple-Lok improved performance by design Swivel Connection Higher pressure ratings and greater reliability are among the valuable advantages of our enhanced Triple-Lok female connection design. It features a dual-angle seat that accepts both 37 and 45 flare fittings and repositions the sealing location away from the tip of the male nose. Compared with nonswivel Triple-Lok fittings, the resulting benefits include: n Increased pressure ratings in most sizes (in fact, 72% higher than competitive product) n Sealing position that helps protect cone and nose, and improves connection reliability n Dual seat acceptance of 37 (all sizes) and 45 flare fittings (sizes 4, 5, 8, 10) n No difference in overall swivel nut or fitting body size, no change in torque or assembly method Imagine, a seal that doesn t get pinched and fail prematurely. Parker's Trap-Seal, with its consistently positive retention in the groove, essentially eliminates the possibility of pop-out that can occur with standard round-shaped O-rings. n Trapezoidal seal shape improves retention within Seal-Lok s ORFS groove n Virtually eliminates costly leakage and/or pre-assembly handling time n Significantly reduces need to replace/reinstall seal n Standard O-ring can be used in field replacement (groove design unchanged) n Same material and hardness (90 Durometer Nitrile) as Parker s standard O-ring

5 Superior Plating For Unrivaled Protection Against Corrosion. Superior plating means better corrosion resistance, even in the harshest environment. White corrosion, caused by zinc oxide formation, occurs first during normal use. Other than appearance, fittings still have adequate protection. Red rust, the formation of iron oxide, occurs long after white corrosion. This signals oxidation and deterioration of the base metal, that may require replacement of the fitting. Current SAE requirement is 72 hours with no red rust The proposed revised SAE requirement is 96 hours with no red rust PARKER Independent Salt Spray Test Shows Parker Plating Is Superior HOURS (EXPOSED TO NEUTRAL SALT SPRAY TEST ASTM B117) Parker exceeds the current and proposed SAE red rust requirements COMPETITOR A Testing was completed on the top five major competitors of tube fittings COMPETITOR B Fittings where red rust appears are outlined in red COMPETITOR C COMPETITOR D COMPETITOR E Pictures and testing were completed by Miami Valley Materials Testing Center an accredited independent test center. Custom Products for applications as different as snowflakes Parker can manufacture custom products to your specifications, your drawings, or world standards whether you need thousands or just one of a kind. And by turning to us, you can typically reduce your lead times and the price of lower-volume parts. With our exclusive Rapid Response system and integrated computer-to-machine technology we can: n Produce new parts in remarkably short time frames n Reduce machine set-up times n Produce smaller-run quantities n Respond to emergency orders within hours, not days Next time you have a great idea or an urgent requirement, call Parker and ask for custom fittings.

6 How to Order How to Order Select the appropriate part number from the Tube Fitting Part # column located on the corresponding product page. Add the material suffix to the end of the part number (S = Steel, SS = Stainless Steel, B = Brass). For a non-compressed part number (with spaces within the part number), add a dash (-) right before the material suffix. Example: 8 F5OLO Example: 8 F5OLO-S For a compressed part numbers (with no spaces within the part number), add the material suffix without the dash (-). Example: 8M18F87OMLOS Remove all spaces from non-compressed part numbers. Example: 8F5OLO-S To arrive at the final part number, add the letter X to the beginning of the part number. Example: X8F5OLO-S Note: If the final part number has more than 12 characters, please refer to Appendix A on page 87 for the corresponding the PMH part number. Example: X8M18F87OMLOS has a corresponding PMH number of PMH Parker Hannifin Corporation

7 Seal-Lok O-Ring Face Seal Tube Fittings Seal-Lok O-Ring Face Seal Tube Fittings 5 Parker Hannifin Corporation

8 Seal-Lok O-Ring Face Seal Tube Fittings Nuts, Sleeves, Locknuts BL Tube Nut TL Braze Sleeve TL-Reducer Braze Reducer Sleeve WLNL Bulkhead Locknut WLNML Blkhd Locknut - mm Hex HLO Union Page 11 Page 11 WLO Bulkhead Union Page 11 WMLO Bulkhead Union - mm Hex Page 11 WF5OLO ORFS Blkhd / SAE-ORB Page 11 F5OLO ORFS / SAE-ORB Straights FF5OLO ORFS - Long / SAE-ORB FLO ORFS / NPTF Page 12 GLO ORFS / NPTF Page 12 Page 12 F87OMLO ORFS / ISO 6149 Page 13 F42EDMLO ORFS / BSPP-ED Page 13 F82EDMLO ORFS / Metric-ED Page 13 LOHB3 ORFS / Braze Socket Page 14 Page 14 TRLON Tube End Reducer Page 14 LOHL6 Extender and Expander Page 14 HL6 ORFS Swivel Union Page 14 F65OL ORFS Swivel / SAE-ORB Straight Swivels Page 15 G65L ORFS Swivel / SAE-ORB F6L ORFS Swivel / NPTF Page 15 G6L ORFS Swivel / NPTF Page 14 Page 16 WNLO Bulkhead Union Page 15 V6LO ORFS Swivel Elbow 45 Elbows Page 16 V5OLO ORFS / SAE-ORB VLO ORFS / NPTF Page 16 Page 16 V87OMLO ORFS / ISO 6149 ELO Union Elbow Page 16 Page 17 WELO Bulkhead Union 90 Elbows Page 18 C6LO ORFS Swivel Elbow Page 17 AOEL6 ORFS Swivel / SAE-ORB C5OLO ORFS / SAE-ORB Page 17 CC5OLO ORFS / SAE-ORB - Long CLO ORFS / NPTF Page 17 Page 18 C87OMLO ORFS / ISO 6149 Page 19 C8OMLO ORFS / Metric-ORR Page 19 C4OMLO ORFS / BSPP-ORR Page 20 JLO Union Tee Page 19 Page 19 WJLO Bulkhead Branch WJJLO Bulkhead Run Page 20 Tees Page 21 Page 21 Page 22 Page 21 Page 22 6 Parker Hannifin Corporation

9 Seal-Lok O-Ring Face Seal Tube Fittings S6LO ORFS Swivel Branch R6LO ORFS Swivel Run S5OLO SAE-ORB Branch Tee R5OLO SAE-ORB Run Tee SLO NPTF Branch Tee S87OMLO ISO 6149 Branch Tee Page 22 R87OMLO ISO 6149 Run Tee Crosses Page 22 KLO Union Cross Page 22 Plugs, Caps and Bleed Page 23 PNLO ORFS Plug Page 23 FNL ORFS Cap Page 23 Page 24 Page 24 Page 24 Page 24 7 Parker Hannifin Corporation

10 Seal-Lok Introduction The Seal-Lok fitting was developed by the in the early 1980s. This product has proven to be very effective in eliminating leakage at the higher pressures found in today s hydraulic systems. It meets or exceeds the strict requirements of SAE J1453 and ISO The Seal-Lok fitting is an O-ring face seal type fitting that consists of a nut, a body, an O-ring and a sleeve (Fig. 1). As shown in Fig. 3, the tube is flanged to 90 (or the tube may be brazed instead to a braze-type sleeve). When the fitting is assembled, it compresses an O-ring in the precision machined groove of the fitting body to form a leak tight seal. Seal-Lok fittings are suitable for a wide range of tube wall thicknesses and are readily adaptable to pipe, inch or metric tubing and hose. (Please refer to Tables 2 and 3 for min./max. tube wall thickness for inch and metric tubing, respectively). Seal-Lok s leak-free design and rugged construction make it suitable for a wide range of applications where higher pressures, vibration and impulse are prevalent. It is popular in markets such as construction, agriculture, machine tool, utility, paper making, automotive, etc. Design and Construction The Seal-Lok fitting consists of four main components: a body, a sleeve, an O-ring and a nut. The more popular materials from which Seal-Lok is manufactured are shown in Table 1. The Seal-Lok Fitting Body. There are over 60 different body configurations to choose from for specific applications. The body face is manufactured with Parker s CORG (captive O-ring groove), which keeps the high durometer O-ring captive during installation (see Fig. 2). In addition, the Seal-Lok fitting body shapes are forged for added strength and longer service life, eliminating the potential leak paths associated with multi-component brazed fittings. Straight products are made from cold drawn barstock. The cold drawing process ensures consistent dimensional tolerances, improved strength and better surface finish. The Seal-Lok Fitting Nut. Seal-Lok tube nuts are either cold formed or machined from cold drawn bar stock, depending on the size. The cold forming process increases the material strength and its fatigue properties, imparting high strength and longer service life to the nuts. The Seal-Lok Flange Sleeve. The preferred method of making a Seal-Lok connection is by using the Parker Parflange machine to create the 90 flange on the tube end. A flange sleeve is used to support the flange and the tube. It also provides the contact shoulder for the nut, a back-up for the 90 tube flange and support at the tube O.D (see Fig. 3). The Parflange process provides the following advantages: Several times faster than brazing. Does not require any special pre- or post-flange cleaning. Cleaner and safer than brazing. Accommodates the use of plated or unplated sleeve and tube. Eliminates a potential leak path associated with braze joints. Seal-Lok O-Ring Face Seal Tube Fittings Fig. 1 Seal-Lok Fitting Body, O-ring, Sleeve and Nut Seal-Lok Steel Stainless Steel Fittings ASTM Type ASTM Type Forged Bodies A /1215 A Bar Stock Bodies A108 12L14 A Cold Formed Nuts A576 C Machined Nuts* A108 12L14 11L37 A Braze Sleeves & Braze Connectors A108 12L14 A L Flange Sleeves A108 12L14 A Table 1 Standard Material Specifications for Seal-Lok Fittings *All stainless steel nuts are coated to prevent galling at assembly. Note: Other materials can be produced upon request. Finish: Zinc clear chromate. Fig. 2 Captive O-ring Groove (CORG) Cutaway Dimensions and pressures for reference only, subject to change. 8 Parker Hannifin Corporation

11 Seal-Lok O-Ring Face Seal Tube Fittings The Seal-Lok Braze Sleeve. A second method of sleeve attachment is with the braze sleeve. The sleeve is brazed to the tube end as shown in Fig. 3. The flat, smooth surface of the braze sleeve seals against the O-ring when fully assembled. The holding power is provided by the braze. Braze Sleeve O-ring (Trap-Seal) Parflange Sleeve The Seal-Lok Trap-Seal. The Trap-Seal, with its consistently positive retention in the groove, essentially eliminates the possibility of full or partial O-ring pop out. The seal's trapezoidal shaped cross-section leads to improved retention within Seal- Lok's CORG groove and virtually eliminates costly leakage and time consuming pre-assembly handling. The groove design has not changed, so the standard O-ring can be used for seal replacement in the field. Currently, the Trap-Seal is offered in 90-durometer Nitrile (NBR). How Seal-Lok Fittings Work The Seal-Lok fitting body face contains a high durometer O-ring that is held captive in a precision machined groove. As the nut is tightened onto the fitting body, the O-ring is compressed between the body and flat face of the tube flange or braze sleeve to form a tight, positive seal (see Fig. 3). As the two faces come in contact, further tightening of the nut produces a sharp rise in assembly torque. A solid pull of the wrench at this point, to recommended assembly torque, completes the assembly. The sharp torque rise gives a solid feel at assembly, minimizing the possibility of over tightening. Because the sealing surfaces are flat and perpendicular to the assembly pull, they remain virtually free of distortion during assembly, giving Seal-Lok fittings practically unlimited remakeability. The O-ring should be inspected at each disassembly and replaced when necessary. See the O-Rings and Seals section for information on replacement ORFS O-rings. Metric Seal-Lok The tube/hose end connection for metric Seal-Lok is the same as standard (inch) Seal-Lok. It consists of a body, a flange or braze sleeve, an O-ring and a nut. The difference is at the port end of the fitting. Instead of the SAE straight thread connection, it features a similar connection with metric threads per ISO Additionally, the fitting body, tube nut and locknut are manufactured with metric hexes or forging wrench flats. The metric Seal-Lok fittings meet or exceed all requirements of ISO Nut Fitting Body Fig. 3 Seal-Lok Union cutaway with flanged and brazed assemblies Turned Diameter Turned Diameter with Groove Fig. 4 Metric Seal-Lok Straight and Shaped Connectors with Identification for use with ISO Port Small Identification Groove for Metric Tube Fig. 5 Metric (Tube) Seal-Lok Sleeves Dimensions and pressures for reference only, subject to change. 9 Parker Hannifin Corporation

12 Seal-Lok O-Ring Face Seal Tube Fittings Identification To differentiate metric Seal-Lok from standard (inch) Seal-Lok, the following identification features have been incorporated in the design: Straight connectors (straight studs) have a short length of turn diameter with a small groove machined in it s middle, as seen in Fig. 4. The locknuts on shaped connectors (stud elbows, tees and crosses) have a similar turn diameter adjacent to the washer, without a groove, as seen in Fig. 4. The sleeve is identified by a small groove machined on its large diameter as shown in Fig. 5. Body Inch Sleeve and Tube Metric Sleeve and Tube Nut Versatility The Seal-Lok fitting is very versatile in that it can be used with inch and metric tubing, as well as hose (see Fig 6). The following example illustrates the options with a ½" (-8) Seal-Lok fitting: ½" fitting and ½" nut can connect to ½" tubing using the ½" sleeve. ½ fitting and ½" nut can connect to 12 mm tubing using 12 mm sleeve. Without nut and sleeve, ½" fitting can connect to hose. The process also works in reverse. A metric Seal-Lok fitting and metric nut can connect to inch tubing by simply using the inch sleeve. Tube Wall Thickness Recommended min/max tube wall thicknesses for inch and metric Seal-Lok are provided in Tables 2 and 3, respectively. When using the braze method, all tube wall thicknesses can be used. Hose Fig. 6 Seal-Lok Works with Inch or Metric Tube and Hose Size Steel, Alloy Steel, St. Steel, Copper, Monel O.D. Inches Dash Number SAE O-Ring Face Seal Seal-Lok 1/ / / / / / / / Table 2 Recommended Min./Max. Tube Wall Thickness for Inch Seal-Lok O.D. Size in mm Steel, Alloy Steel, Stainless Steel, Copper, Monel Wall Thickness in mm Used With Fitting Size Table 3 Recommended Min./Max. Tube Wall Thickness for Metric Seal-Lok Dimensions and pressures for reference only, subject to change. 10 Parker Hannifin Corporation

13 BL Tube Nut ORFS SAE Seal-Lok O-Ring Face Seal Tube Fittings TL-Reducer Reducer Sleeve ORFS Silver Braze Sleeve Reducer SAE B O.D. T6 HEX C G From Stock UNF/UNF-2B S 4 BL 1/4 9/ / BL 3/8 11/ / BL 1/2 13/ / BL 5/ / BL 3/4 1 3/ / BL 7/8 1 3/ / BL* 7/8 1 5/ / BL 1 1 7/ / BL 1 1/4 1 11/ / BL 1 1/ / BL* 2 2 1/ / * Sizes 14 and 32 are not included in SAE J1453. ** These tube nuts should not be exposed to annealing temperatures, such as furnace brazing. Contact the for information on special nuts. 1 2 A D E F From Stock S 6-4 TL 3/8 1/ TL 1/2 1/ TL 1/2 3/ TL 5/8 1/ TL 5/8 3/ TL 5/8 1/ TL 3/4 1/ TL 3/4 3/ TL 3/4 1/ TL 3/4 5/ TL 3/4 7/ TL 1 1/ TL 1 5/ TL 1 3/ TL 1 7/ TL 1 1/4 3/ TL 1 1/ TL 1 1/ TL 1 1/2 1 1/ Unplated part, oil dipped for corrosion protection. * D is for silver brazing. TL Braze Sleeve for Inch Tubing ORFS Silver Braze Sleeve SAE A O.D. DIA. *D E F From Stock S 4 TL 1/ TL 3/ TL 1/ TL 5/ TL 3/ TL** 7/ TL TL 1 1/ TL 1 1/ TL** Unplated part, oil dipped for corrosion protection. * D is for silver brazing. ** Sizes 14 and 32 are not included in SAE J1453. WLMNL Bulkhead Locknut mm Hex ISO BHLN SAE 52M0118 D S4 O.D. END H2 HEX From Stock (mm) UN/UNF-2B (mm) (mm) S 4WLNML 6 1/4 9/ WLNML 8,10 3/8 11/ WLNML 12 1/2 13/ WLNML 14,15,16 5/ WLNML 18,20 3/4 1 3/ WLNML 22, / WLNML 28,30,32 1 1/4 1 11/ WLNML 35,38 1 1/ WLNL Bulkhead Locknut SAE O.D. T END UN/UNF-2A B HEX From Stock S TT 4 WLNL 1/4 9/ / WLNL 3/8 11/ WLNL 1/2 13/ / WLNL 5/ / WLNL 3/4 1 3/ / WLNL 1 1 7/ / Parker Hannifin Corporation

14 HLO Union ORFS / ORFS Seal-Lok O-Ring Face Seal Tube Fittings WLO Bulkhead Union ORFS (all three ends) SAE * Size 32 is not included in SAE J1453. H HEX S 1 2 FF 4 HLO 1/4 1/ / HLO 3/8 3/ / HLO 3/8 1/ / HLO 1/2 1/ / HLO 1/2 3/ / HLO 5/8 5/ / HLO 5/8 1/ / HLO 3/4 3/ / HLO 3/4 5/ / HLO / HLO 1 3/ / HLO 1 1/4 1 1/ / HLO 1 1/2 1 1/ / HLO* /4 3.0 B HEX E MAX. W DIA. ** W Bulkhead pilot diameter. Recommended clearance hole is W ± 0.015". S 1 2 GG SS WW 4 WLO 1/4 1/4 13/ WLO 3/8 3/ WLO 1/2 1/2 1 1/ WLO 5/8 5/8 1 5/ WLO 3/4 3/4 1 1/ WLO / WLO 1 1/4 1 1/ WLO 1 1/2 1 1/2 2 3/ WMLO Bulkhead Union mm Hex ORFS / ORFS ISO BHS SAE 52M0601 S4 1 & 2 E* I 2 I 4 L15 HEX (mm) (mm) (mm) (mm) (mm) (mm) S 4WMLO 6 1/ WMLO 8,10 3/ WMLO 12 1/ WMLO 14,15,16 5/ WMLO 18,20 3/ WMLO 22, WMLO 28,30,32 1 1/ WMLO 35,38 1 1/ * E Maximum bulkhead thickness. 12 Parker Hannifin Corporation

15 Seal-Lok O-Ring Face Seal Tube Fittings WF5OLO Straight Thread Bulkhead Connector ORFS / SAE-ORB E H W 1 2 MAX. HEX L SS DIA. WW UN/UNF-2A S 4 WF5OLO 1/4 7/ / WF5OLO 3/8 9/ WF5OLO 1/2 3/ / WF5OLO 5/8 7/ / WF5OLO 3/4 1 1/ / * E Maximum bulkhead thickness. ** W Bulkhead pilot diameter. Recommended clearance hole is W ". F5OLO Straight Thread Connector ORFS / SAE-ORB SAE H 1 2 HEX L5 UN/UNF-2A S 4 F5OLO 1/4 7/ / F5OLO 1/4 1/2-20 5/ F5OLO 1/4 9/ / F5OLO 1/4 3/4-16 7/ F5OLO 3/8 9/ / F5OLO 3/8 7/ / F5OLO 3/8 1/2-20 3/ F5OLO 3/8 3/4-16 7/ F5OLO 3/8 7/ F5OLO 1/2 3/4-16 7/ F5OLO 1/2 9/ / F5OLO 1/2 7/ F5OLO 1/2 1 1/ / F5OLO 1/2 1 5/ / F5OLO 5/8 7/ / F5OLO 5/8 3/ / F5OLO 5/8 1 1/ / F5OLO 5/8 1 5/ / F5OLO 3/4 1 1/ / F5OLO 3/4 3/ / F5OLO 3/4 7/ / F5OLO 3/4 1 5/ / F5OLO 1 1 5/ / F5OLO 1 1 1/ / F5OLO 1 1 5/ / F5OLO 1 1/4 1 5/ / F5OLO 1 1/4 1 5/ / F5OLO 1 1/4 1 7/ / F5OLO 1 1/2 1 7/ / F5OLO 1 1/2 1 5/ / F5OLO * 2 2 1/ / * Size 32 is not included in SAE J1453. FF5OLO Long Straight Thread Connector ORFS-Long / SAE-ORB SAE (previously ) H HEX S 1 2 UN/UNF-2A L6 4 FF5OLO 1/4 7/ / FF5OLO 3/8 9/ / FF5OLO 1/2 3/4-16 7/ FF5OLO 5/8 7/ / FF5OLO 3/4 1 1/ / FF5OLO 1 1 5/ / FF5OLO 1 1/4 1 5/ / FF5OLO 1 1/2 1 7/ / Parker Hannifin Corporation

16 FLO Male Pipe Connector ORFS / NPTF H HEX S 1 2 NPTF FF 4 FLO 1/4 1/ / FLO 1/4 1/ / FLO 1/4 3/ / FLO 3/8 1/ / FLO 3/8 3/ / FLO 3/8 1/ / FLO 1/2 3/ / FLO 1/2 1/ / FLO 1/2 3/ / FLO 5/8 1/ / FLO 5/8 3/ / FLO 3/4 3/ / FLO 3/4 1/ / FLO 3/ / / FLO / / FLO 1 3/ / FLO 1 1/4 1 1/4-11 1/ / FLO 1 1/2 1 1/2-11 1/ /8 3.0 GLO Female Pipe Connector ORFS / Female Pipe H 1 2 FF HEX NPTF S 4-4 GLO 1/4 1/ / GLO 3/8 1/ / GLO 1/2 1/ /8 6.0 F42EDMLO Male Connector BSPP (for ISO Port) ORFS / BSPP-ED C 1 2 HEX L (mm) BSPP (mm) (mm) S 4F42EDMLO 6 1/4 1/ F42EDMLO 6 1/4 1/ F42EDMLO 6 1/4 3/ F42EDMLO 6 1/4 1/ F42EDMLO 8,10 3/8 1/ F42EDMLO 8,10 3/8 3/ F42EDMLO 12 1/2 3/ F42EDMLO 12 1/2 1/ F42EDMLO 12 1/2 3/ F42EDMLO 14,15,16 5/8 1/ F42EDMLO 14,15,16 5/8 3/ F42EDMLO 18,20 3/4 3/ F42EDMLO 18,20 3/4 1/ F42EDMLO 18,20 3/ F42EDMLO 22, F42EDMLO 22,25 1 3/ F42EDMLO 28,30,32 1 1/4 1 1/ F42EDMLO /2 1 1/ Seal-Lok O-Ring Face Seal Tube Fittings F87OMLO Metric Straight Thread Connector ORFS / ISO 6149 ISO SDS SAE 52M0187 S3 1 2 L8 HEX (mm) ISO 261 (mm) (mm) S 4M12F87OMLO 6 1/4 M12x M14F87OMLO 6 1/4 M14x M12F87OMLO 8,10 3/8 M12x M14F87OMLO 8,10 3/8 M14x M16F87OMLO 8,10 3/8 M16x M18F87OMLO 8,10 3/8 M18x M14F87OMLO 12 1/2 M14x M18F87OMLO 12 1/2 M18x M22F87OMLO 12 1/2 M22x M18F87OMLO 14,15,16 5/8 M18x M22F87OMLO 14,15,16 5/8 M22x M27F87OMLO 14, 15, 16 5/8 M27x M22F87OMLO 18,20 3/4 M22x M27F87OMLO 18,20 3/4 M27x M33F87OMLO 18,20 3/4 M33x M33F87OMLO 22,25 1 M33x M42F87OMLO 28,30,32 1 1/4 M42x * M38X2 is not included in ISO F82EDMLO Male Connector Metric (for ISO Port) ORFS / Metric-ED C 1 2 HEX L5 (mm) Metric (mm) (mm) S 4M12F82EDMLO 6 1/4 M12x M14F82EDMLO 8, 10 3/8 M14x M16F82EDMLO 8,10 3/8 M16x M18F82EDMLO 12 1/2 M18x M22F82EDMLO 14,15,16 5/8 M22x M27F82EDMLO 18,20 3/4 M27x M33F82EDMLO 22,25 1 M33x M42F82EDMLO 28,30,32 1 1/4 M42x LOHL6 Tube End Extender / Expander ORFS / ORFS Swivel H HEX S 1 2 UN/UNF-2A F 4 LOHL6 1/4 9/ / LOHL6 3/8 11/ / LOHL6 3/8 11/ / LOHL6 1/2 13/ / LOHL6 1/2 13/ / LOHL6 5/ / LOHL6 3/4 1 3/ / LOHL / / LOHL6 1 1/4 1 11/ / LOHL6 1 1/ / Parker Hannifin Corporation

17 LOHB3 Braze Connector ORFS / Braze Socket SAE E* DIA. H HEX * E is for silver brazing. Standard steel parts are not recommended for welding. ** Size 14 is not included in SAE J1453. S 1 2 DD L1 4 LOHB3 1/4 1/ / LOHB3 1/4 3/ / LOHB3 3/8 3/ / LOHB3 3/8 1/ / LOHB3 3/8 1/ / LOHB3 1/2 1/ / LOHB3 1/2 1/ / LOHB3 1/2 3/ / LOHB3 1/2 5/ / LOHB3 1/2 3/ / LOHB3 5/8 5/ / LOHB3 5/8 3/ / LOHB3 5/8 1/ / LOHB3 5/8 3/ / LOHB3 3/4 3/ / LOHB3 3/4 1/ / LOHB3 3/4 5/ / LOHB3 3/ / LOHB3** 7/8 7/ / LOHB / LOHB3 1 1/ / LOHB3 1 3/ / LOHB / / LOHB3 1 1/4 1 1/ / LOHB3 1 1/ / LOHB3 1 1/4 1 1/ / LOHB3 1 1/2 1 1/ / LOHB3 1 1/2 1 1/ / Seal-Lok O-Ring Face Seal Tube Fittings TRLON Tube End Reducer ORFS Swivel / ORFS Tube End SAE (body only) SAE A (body with large nut) 1 2 F S 6-4 TRLON* 3/8 1/ TRLON** 1/2 1/ TRLON* 1/2 3/ TRLON** 5/8 1/ TRLON** 5/8 3/ TRLON** 5/8 1/ TRLON** 3/4 1/ TRLON** 3/4 3/ TRLON** 3/4 1/ TRLON* 3/4 5/ TRLON** 1 1/ TRLON** 1 5/ TRLON* 1 3/ TRLON** 1 1/4 3/ TRLON* 1 1/ TRLON** 1 1/ TRLON** 1 1/2 1 1/ TRLON** 2 1 1/ TRLON** 2 1 1/ * Assembled with crimp nut. ** Assembled with large BL nut. To order reducer without large nut, remove the N from the part number (i.e., TRLO). * Assembled with Crimp Nut ** Assembled with Large BL Nut F65OL Straight Thread Swivel Connector ORFS Swivel / SAE-ORB SAE H 1 2 HEX L5 UN/UNF-2A S 4 F65OL 1/4 7/ / F65OL 3/8 9/ / F65OL 1/2 3/4-16 7/ F65OL 5/8 7/ / F65OL 3/4 1 1/ / F6L Pipe Thread Swivel Connector ORFS Swivel / NPTF H 1 2 FF HEX NPTF S 4 F6L 1/4 1/ / F6L 1/4 1/ / F6L 3/8 1/ / F6L 3/8 3/ / F6L 1/2 3/ / F6L 1/2 1/ / F6L 5/8 1/ / F6L 3/4 3/ / F6L / / Parker Hannifin Corporation

18 HL6 Swivel Nut Union ORFS Swivel / ORFS Swivel H HEX S 1 2 FF 4 HL6 1/4 1/ / HL6 3/8 3/ / HL6 1/2 1/ / HL6 5/8 5/ / HL6 3/4 3/ / HL / Seal-Lok O-Ring Face Seal Tube Fittings G6L Female Pipe Thread Swivel Connector ORFS Swivel / NPTF S 1 2 NPTF FF H 4-4 G6L 1/4 1/ / G6L 3/8 1/ / G6L 1/2 1/ /8 6.0 G65L Straight Thread Swivel Female Connector ORFS Swivel / SAE-ORB H HEX S 1 2 UN/UNF-2B L5 4 G65L 1/4 7/ / G65L 3/8 7/ / G65L 1/2 7/ / WNLO 45 Bulkhead Union Elbow ORFS / ORFS SAE E W 1 2 MAX. JJ P SS DIA. WW ZZ S 4 WNLO 1/4 1/ / WNLO 3/8 3/ / WNLO 1/2 1/ / WNLO 5/8 5/ / WNLO 3/4 3/ / WNLO / WNLO 1 1/4 1 1/ / * JJ Across wrench flats. ** E Maximum bulkhead thickness. *** W Bulkhead pilot diameter. Recommended clearnace hole is W ". 16 Parker Hannifin Corporation

19 V6LO 45 Swivel Nut Elbow ORFS / ORFS Swivel Seal-Lok O-Ring Face Seal Tube Fittings ELO Union Elbow ORFS / ORFS * JJ Across Wrench Flats SAE * JJ Across Wrench Flats S 1 & 2 JJ N2 P 4 V6LO 1/4 9/ V6LO 3/8 3/ V6LO 1/2 3/ V6LO 5/8 1 1/ V6LO 3/4 1 3/ V6LO 1 1 7/ V6LO 1 1/4 1 5/ V6LO 1 1/2 1 7/ VLO 45 Male Elbow ORFS / NPTF * Size 32 is not included in SAE J1453. S 1 2 JJ M 4 ELO 1/4 1/4 9/ ELO 3/8 3/8 3/ ELO 1/2 1/2 3/ ELO 5/8 5/8 1 1/ ELO 3/4 3/4 1 3/ ELO / ELO 1 1/4 1 1/4 1 5/ ELO 1 1/2 1 1/2 1 7/ ELO* / * JJ Across Wrench Flats S 1 2 NPTF JJ N1 P 4 VLO 1/4 1/8-27 9/ VLO 1/4 1/4-18 9/ VLO 3/8 1/4-18 3/ VLO 3/8 3/8-18 3/ VLO 1/2 3/8-18 3/ VLO 1/2 1/2-14 7/ VLO 5/8 1/ / VLO 3/4 3/ / VLO /2 1 7/ V87OMLO 45 Metric Straight Thread Elbow ORFS / ISO 6149 ISO SDE45 SAE 52M0387 * S2 Across Hex Flats 1 2 L12 L13 S2 (mm) ISO 261 (mm) (mm) (mm) S 4M12V87OMLO 6 1/4 M12x M14V87OMLO 6 1/4 M14x M16V87OMLO 8,10 3/8 M16x M18V87OMLO 12 1/2 M18x M22V87OMLO 14,15,16 5/8 M22x M27V87OMLO 18,20 3/4 M27x M33V87OMLO 22,25 1 M33x M42V87OMLO 28,30,32 1 1/4 M42x M48V87OMLO 35,38 1 1/2 M48x Parker Hannifin Corporation

20 Seal-Lok O-Ring Face Seal Tube Fittings V5OLO 45 Straight Thread Elbow ORFS / SAE-ORB SAE * JJ Across Hex Flats S 1 2 UN/UNF-2A JJ P Q 4 V5OLO 1/4 7/ / V5OLO 1/4 9/ / V5OLO 3/8 9/ / V5OLO 3/8 7/ / V5OLO 3/8 3/4-16 3/ V5OLO 1/2 3/4-16 3/ V5OLO 1/2 9/ / V5OLO 1/2 7/8-14 3/ V5OLO 5/8 7/ / V5OLO 5/8 3/ / V5OLO 5/8 1 1/ / V5OLO 3/4 1 1/ / V5OLO 3/4 7/ / V5OLO 3/4 1 5/ / V5OLO 1 1 5/ / V5OLO 1 1 1/ / V5OLO 1 1 5/ / V5OLO 1 1/4 1 5/ / V5OLO 1 1/2 1 7/ / WELO Bulkhead Union Elbow ORFS / ORFS SAE E MAX. S 1 2 JJ R S SS W WW 4 WELO 1/4 1/ / WELO 3/8 3/ / WELO 1/2 1/ / WELO 5/8 5/ / WELO 3/4 3/ / WELO / WELO 1 1/4 1 1/ / WELO 1 1/2 1 1/ / * JJ Across wrench flats. ** E Maximum bulkhead thickness. *** W Bulkhead pilot diameter. Recommended clearance hole is W ". 18 Parker Hannifin Corporation

21 C6LO Swivel Nut Elbow ORFS / ORFS Swivel SAE * JJ Across Wrench Flats Seal-Lok O-Ring Face Seal Tube Fittings CC5OLO Long Straight Thread Elbow ORFS-Long / SAE-ORB SAE S 1 2 AAA JJ M 4 C6LO 1/4 1/ / C6LO 3/8 3/ / C6LO 1/2 1/ / C6LO 5/8 5/ / C6LO 3/4 3/ / C6LO / C6LO 1 1/4 1 1/ / C6LO 1 1/2 1 1/ / * JJ Across Wrench Flats S 1 2 UN/UNF-2A JJ M N 4 CC5OLO 1/4 7/ / CC5OLO 3/8 9/ / CC5OLO 1/2 3/4-16 3/ CC5OLO 5/8 7/ / CC5OLO 3/4 1 1/ / CC5OLO 1 1 5/ / AOEL6 Straight Thread Swivel Elbow ORFS Swivel / SAE-ORB SAE * JJ Across Wrench Flats S 1 2 UN/UNF-2A AAA JJ N 4 AOEL6 1/4 7/ / AOEL6 3/8 9/ / AOEL6 1/2 3/ / AOEL6 5/8 7/ / AOEL6 3/4 1 1/ / AOEL / / AOEL6 1 1/4 1 5/ / AOEL6 1 1/2 1 7/ / CLO Straight Thread Elbow ORFS / NPTF * JJ Across Wrench Flats S 1 2 NPTF JJ M N 4 CLO 1/4 1/8-27 9/ CLO 1/4 1/4-18 9/ CLO 1/4 1/2-14 7/ CLO 3/8 1/4-18 3/ CLO 3/8 3/8-18 3/ CLO 3/8 1/2-14 7/ CLO 1/2 3/8-18 3/ CLO 1/2 1/4-18 3/ CLO 1/2 1/2-14 7/ CLO 1/2 3/ / CLO 5/8 1/ / CLO 5/8 3/ / CLO 5/8 3/ / CLO 3/4 3/ / CLO 3/4 1/ / CLO 3/ /2 1 5/ CLO /2 1 7/ CLO 1 3/ / CLO 1 1/4 1 1/4-11 1/2 1 5/ CLO 1 1/2 1 1/2-11 1/2 1 7/ CLO 1 1/2 1 1/4-11 1/2 1 7/ Parker Hannifin Corporation

22 Seal-Lok O-Ring Face Seal Tube Fittings C5OLO Straight Thread Elbow ORFS / SAE-ORB SAE JJ M N UN/UNF-2A S 4 C5OLO 1/4 7/ / C5OLO*** 1/4 9/ / C5OLO 3/8 9/ / C5OLO 3/8 7/ / C5OLO 3/8 1/2-20 3/ C5OLO 3/8 3/4-16 3/ C5OLO*** 3/8 7/8-14 7/ C5OLO 1/2 3/4-16 3/ C5OLO 1/2 9/ / C5OLO*** 1/2 7/8-14 7/ C5OLO 1/2 1 1/ / C5OLO 5/8 7/ / C5OLO 5/8 3/ / C5OLO 5/8 1 1/ / C5OLO 3/4 1 1/ / C5OLO 3/4 3/ / C5OLO 3/4 7/ / C5OLO 3/4 1 5/ / C5OLO 1 1 5/ / C5OLO 1 1 1/ / C5OLO 1 1 5/ / C5OLO 1 1/4 1 5/ / C5OLO 1 1/4 1 5/ / C5OLO 1 1/4 1 7/ / C5OLO 1 1/2 1 7/ / C5OLO 1 1/2 1 5/ / C5OLO** 2 2 1/ / ** Size 32 ist not included in SAE J1453. *** JJ for these parts does not conform to SAE. * JJ Across Wrench Flats C87OMLO 90 Metric Straight Thread Elbow ORFS / ISO 6149 ISO SDE SAE 52M0287 * S2 Across Hex Flats 1 2 L7 L10 S2 (mm) ISO 261 (mm) (mm) (mm) S 4M12C87OMLO 6 1/4 M12x M12C87OMLO 8,10 3/8 M12x M14C87OMLO 8,10 3/8 M14x M16C87OMLO 8,10 3/8 M16x M14C87OMLO 12 1/2 M14x M18C87OMLO 12 1/2 M18x M22C87OMLO 12 1/2 M22x M18C87OMLO 14,15,16 5/8 M18x M22C87OMLO 14,15,16 5/8 M22x M22C87OMLO 18,20 3/4 M22x M27C87OMLO 18,20 3/4 M27x M33C87OMLO 22,25 1 M33x M42C87OMLO 28,30,32 1 1/4 M42x M48C87OMLO 35,38 1 1/2 M48x * For special M38x2 (ISO style) port. The current ISO 6149 does not include the M38 size. 20 Parker Hannifin Corporation

23 Seal-Lok O-Ring Face Seal Tube Fittings C8OMLO Metric Straight Thread Elbow ORFS / Metric-ORR 1 2 L7 L10 S2 (mm) ISO 261 (mm) (mm) (mm) S 4M12C8OMLO 6 1/4 M12x M12C8OMLO 8, 10 3/8 M12x M14C8OMLO 8, 10 3/8 M14x M16C8OMLO 8, 10 3/8 M16x M14C8OMLO 12 1/2 M14x M18C8OMLO 12 1/2 M18x M22C8OMLO 12 1/2 M22x M22C8OMLO 14, 15, 16 5/8 M22x M27C8OMLO 18, 20 3/4 M27x M33C8OMLO 22, 25 1 M33x M38C8OMLO 28, 30, /4 M38x M42C80MLO 28, 30, /4 M42x * S2 Across Hex Flats C4OMLO Male Elbow BSPP (for ISO Port) ORFS / BSPP-ORR 1 2 M N Y (mm) BSPP (mm) (mm) (mm) S 4C4OMLO 6 1/4 1/ C4OMLO 6 1/4 1/ C4OMLO 8,10 3/8 1/ C4OMLO 8,10 3/8 3/ C4OMLO 12 1/2 3/ C4OMLO 12 1/2 1/ C4OMLO 14,15,16 5/8 1/ C4OMLO 14,15,16 5/8 3/ C4OMLO 18,20 3/4 3/ C4OMLO 22,25 1 3/ C4OMLO 22, C4OMLO 28,30,32 1 1/ C4OMLO 28,30,32 1 1/4 1 1/ C4OMLO 35,38 1 1/2 1 1/ * Y Across Wrench Flats WJLO Bulkhead Branch Tee ORFS (all three ends) 1-3 E MAX. JJ R S SS W DIA. WW S 4 WJLO 1/ / WJLO 3/ / WJLO 1/ / WJLO 5/ / WJLO 3/ / WJLO / * JJ Across wrench flats. ** E Maximum bulkhead thickness. *** W Bulkhead pilot diameter. Recommended clearance hole is W ". 21 Parker Hannifin Corporation

24 JLO Union Tee ORFS (all three ends) SAE * Size 32 is not included in SAE J1453. * JJ Across Wrench Flats 1-3 JJ M S 4 JLO 1/4 9/ JLO 3/8 3/ JLO 1/2 3/ JLO 5/8 1 1/ JLO 3/4 1 3/ JLO 1 1 7/ JLO 1 1/4 1 5/ JLO 1 1/2 1 7/ JLO* 2 2 1/ S6LO Swivel Nut Branch Tee ORFS / ORFS / ORFS Swivel SAE * JJ Across Wrench Flats S 1-3 AAA JJ M 4 S6LO 1/ / S6LO 3/ / S6LO 1/ / S6LO 5/ / S6LO 3/ / S6LO / S6LO 1 1/ / S6LO 1 1/ / Seal-Lok O-Ring Face Seal Tube Fittings R6LO Swivel Nut Run Tee ORFS / ORFS Swivel / ORFS SAE END SIZE * JJ Across Wrench Flats S 1-3 AAA JJ M 4 R6LO 1/ / R6LO 3/ / R6LO 1/ / R6LO 5/ / R6LO 3/ / R6LO / R6LO 1 1/ / R6LO 1 1/ / S5OLO Straight Thread Branch Tee ORFS / ORFS / SAE-ORB SAE * JJ Across Wrench Flats JJ M N UN/UNF-2A S 4 S5OLO 1/4 1/4 7/ / S5OLO 1/4 1/4 9/ / S5OLO 3/8 3/8 9/ / S5OLO 1/2 1/2 3/4-16 3/ S5OLO 1/2 1/2 7/ / S5OLO 1/2 1/2 1 1/ / S5OLO 5/8 5/8 7/ / S5OLO 5/8 5/8 1 1/ / S5OLO 3/4 3/4 1 1/ / S5OLO / / S5OLO 1 1/4 1 1/4 1 5/ / S5OLO 1 1/2 1 1/2 1 7/ / WJJLO Bulkhead Run Tee ORFS (all three ends) SAE END SIZE 1-3 E MAX. W DIA. * JJ Across wrench flats. ** E Maximum bulkhead thickness. *** W Bulkhead pilot diameter. Recommended clearance hole is W ". S JJ R S SS WW 4 WJJLO 1/ / WJJLO 3/ / WJJLO 1/ / WJJLO 5/ / WJJLO 3/ / WJJLO / Parker Hannifin Corporation

25 R5OLO Straight Thread Run Tee ORFS / SAE-ORB / ORFS Seal-Lok O-Ring Face Seal Tube Fittings SLO Male Pipe Tee ORFS / ORFS / NPTF SAE * JJ Across Wrench Flats SAE * JJ Across Wrench Flats S 1 2 UN/UNF-2A 3 JJ M N 4 R5OLO 1/4 7/ /4 9/ R5OLO 1/4 9/ /4 3/ R5OLO 3/8 9/ /8 3/ R5OLO 3/8 3/4-16 3/8 3/ R5OLO 1/2 3/4-16 1/2 3/ R5OLO 1/2 7/8-14 1/2 1 1/ R5OLO 5/8 7/8-14 5/8 1 1/ R5OLO 5/8 1 1/ /8 1 3/ R5OLO 3/4 1 1/ /4 1 3/ R5OLO 1 1 5/ / R5OLO 1 1/4 1 5/ /4 1 5/ R5OLO 1 1/2 1 7/ /2 1 7/ S 1 & 2 3 NPTF JJ M N SLO 1/4 1/4-18 9/ SLO 3/8 3/8-18 3/ SLO 3/8 1/4-18 3/ SLO 1/2 3/8-18 3/ SLO 1/2 1/2-14 7/ SLO 5/8 1/ / SLO 3/4 3/ / SLO /2 1 7/ SLO 1 1/4 1 1/4-11 1/2 1 5/ S87OMLO Metric Straight Thread Branch Tee ORFS / ORFS / ISO 6149 ISO SDBT SAE 52M0489 * S2 Across Hex Flats 1 & 2 3 L7 L10 S2 (mm) ISO 261 (mm) (mm) (mm) S 4M12S87OMLO 6 1/4 M12x M14S87OMLO 6 1/4 M14x M14S87OMLO 8,10 3/8 M14x M16S87OMLO 8,10 3/8 M16x M14S87OMLO 12 1/2 M14x M18S87OMLO 12 1/2 M18x M22S87OMLO 12 1/2 M22x M22S87OMLO 14,15,16 5/8 M22x M27S87OMLO 18,20 3/4 M27x M33S87OMLO 22,25 1 M33x M42S87OMLO 28,30,32 1 1/4 M42x M48S87OMLO 35,38 1 1/2 M48x Parker Hannifin Corporation

26 R87OMLO Metric Straight Thread Run Tee ORFS / ISO 6149 / ORFS ISO SDRT SAE 52M0488 * S2 Across Hex Flats Seal-Lok O-Ring Face Seal Tube Fittings PNLO Plug ORFS SAE & 3 2 L7 L10 S2 (mm) ISO 261 (mm) (mm) (mm) S 4M12R87OMLO 6 1/4 M12x M14R87OMLO 6 1/4 M14x M16R87OMLO 8,10 3/8 M16x M14R87OMLO 12 1/2 M14x M18R87OMLO 12 1/2 M18x M22R87OMLO 14,15,16 5/8 M22x M27R87OMLO 18,20 3/4 M27x M42R87OMLO 28,30,32 1 1/4 M42x H OAL 1 HEX (REF.) TT S 4 PNLO 1/4 5/ PNLO 3/8 3/ PNLO 1/2 7/ PNLO 5/8 1 1/ PNLO 3/4 1 1/ PNLO 1 1 1/ PNLO 1 1/4 1 3/ PNLO 1 1/2 2 1/ PNLO* 2 2 3/ * Size 32 is not included in SAE J1453. KLO Union Cross ORFS (all four ends) SAE * JJ Across Wrench Flats 1-4 JJ M S 4 KLO 1/4 9/ KLO 3/8 3/ KLO 1/2 3/ KLO 5/8 1 1/ KLO 3/4 1 3/ KLO 1 1 7/ KLO 1 1/4 1 5/ FNL Cap ORFS SAE O.D. T6 SWIVEL UN/UNF-2B B HEX From Stock S K L 4 FNL 1/4 9/ / FNL 3/8 11/ / FNL 1/2 13/ / FNL 5/ / FNL 3/4 1 3/ / FNL 1 1 7/ / FNL 1 1/4 1 11/ / FNL 1 1/ / Parker Hannifin Corporation

27 Triple-Lok 37 Flare Tube Fittings and Triple-Lok 37 Flare Tube Fittings and 25 Parker Hannifin Corporation

28 Triple-Lok 37 Flare Tube Fittings and Nuts, Sleeves, Locknuts BTX Nut TX Sleeve WLN Bulkhead Locknut SBR Braze Ring HTX Union Page 31 Page 31 LHTX Large Hex Union Page 31 WTX Bulkhead Union Page 31 XHLO 37 Flare / ORFS WF5OX SAE-ORB / 37 Bulkhead Straights WFTX NPTF / 37 Bulkhead Page 32 WGTX NPTF / 37 Bulkhead Page 31 TRTX / TRTXN Reducer Page 32 XHX6 Extender and Expander Page 33 F5OX SAE-ORB / 37 Flare Page 32 FF5OX SAE-ORB / 37 Long XHB3 Braze Socket / 37 Flare Page 33 Page 33 FTX NPTF / 37 Flare Page 34 FFTX NPTF / 37 Flare Long GTX NPTF / 37 Flare Page 34 Page 35 F87OMX ISO 6149 / 37 Flare Page 35 F82EDMX Metric-ED / 37 Flare Page 35 F8OMX Metric-ORR / 37 Flare Page 36 F42EDMX BSPP-ED / 37 Flare Page 36 F4OMX BSPP-ORR / 37 Flare Page 36 F3MX BSPT / 37 Flare Page 37 Page 37 HX6 37 Swivel Union Straight Swivels Page 37 XHL6 ORFS Swivel / 37 Swivel Page 37 LOHX6 37 Flare Swivel / ORFS Page 38 F65OX SAE-ORB / 37 Swivel Page 38 F6X NPTF / 37 Swivel G6X NPTF / 37 Swivel Page 38 F68OMX Metric-ORR / 37 Swivel Page 39 Page 39 WNTX Bulkhead Union Page 38 V6X 37 Swivel Elbow Page 39 V5OX SAE-ORB / 37 Flare Page 39 VTX NPTF / 37 Flare Page Elbows ETX Union Elbow Page 40 Page 41 WETX Bulkhead Union Page 41 C6X 37 Swivel Elbow Page 41 AOEX6 SAE-ORB / 37 Swivel X6EF NPTF / 37 Swivel 90 Elbows Page 41 Page 42 Page 42 Page 43 Page Parker Hannifin Corporation

29 Triple-Lok 37 Flare Tube Fittings and C5OX SAE-ORB / 37 Flare CC5OX SAE-ORB / 37 Long CTX NPTF / 37 Flare CCTX NPTF / 37 Flare Long DTX NPTF / 37 Flare C87OMX ISO-6149 / 37 Flare Page 43 C8OMX Metric-ORR / 37 Flare Page 43 C4OMX BSPP-ORR / 37 Flare Page 44 JTX Union Tee Page 44 Page 44 WJTX Bulkhead Branch Tee Page 45 WJJTX Bulkhead Run Tee Tees Page 45 S6X 37 Swivel Branch Tee Page 46 R6X 37 Swivel Run Tee S5OX SAE-ORB Branch Tee Page 46 R5OX SAE-ORB Run Tee Page 47 STX NPTF Branch Tee Page 47 RTX NPTF Run Tee Page 48 OTX NPTF Branch Tee Page 48 KTX Union Cross Page 48 Page 48 PNTX 37 Plug Page 49 FNTX 37 Cap Page 49 Cross Plug and Cap Page 49 Page 49 Page 50 Page Parker Hannifin Corporation

30 Triple-Lok Introduction Parker pioneered the flare fitting concept early in the 20 th century. The design has since gained worldwide acceptance due to it s many inherent features and customer benefits. Today, the 37 flare fitting it is the most widely used fitting in the world. Its appeal is in its simplicity, compact design, ease of assembly, reliability (single seal), material availability, adaptability to inch or metric tube, worldwide availability and acceptance. Further helping its acceptance is its widespread use as a hose adapter. As a tube fitting, it is especially suited for thin and medium wall thickness tube. Even though 37 flare fittings are generally considered to be 3000 psi fittings, Triple-Lok s capabilities range from 9000 psi for 1/4" size to 2000 psi for 2" size. Currently, it is used in virtually every application that uses fluid power for motion control. Parker s Triple-Lok fittings meet the strict requirements of SAE J514 and ISO industry standards. Additionally, they meet many customer and industry-recognized conformance standards and type approvals. Triple-Lok 37 Flare Tube Fittings and Fig. 1 Triple-Lok Fitting Body, Sleeve and Nut Design and Construction The Triple-Lok (37 flare fitting) design is simple. It uses an easily produced flare at the tube end to seal and hold fluid under high pressure. The fitting consists of three pieces: the body, sleeve and nut. The tube end is flared at a 37 angle (74 included angle) and held between the fitting nose (seat) and the sleeve (support) with the nut as shown in Fig. 2, providing a very effective (single) seal between the fitting nose and the tube flare. The design of Triple-Lok fittings is very efficient. The fitting incorporates the smallest seal area of all fitting types. This seal area, as seen in Fig. 2, is only slightly larger than the fluid flow area. The small seal area results in a compact design, low assembly torque, and a relatively high-pressure capability. The primary difference between a two-piece flare fitting and the three-piece design is the flare support sleeve. The support sleeve provides several key functions: 1. It provides a clamping surface for the tube flare. 2. It provides a bearing surface for the tube nut. The sleeve isolates the tube from the nut, minimizing the tube twist during assembly, a common problem of 2-piece flare fitting designs. 3. It provides support to the tube flare. The tapered fitting nose tends to wedge open the tube flare during assembly. The sleeve helps to resist this expansion, thus eliminating the possibility of tube flare and sleeve jamming inside the nut. This eliminates any waste of applied torque and allows for easy disassembly. 4. It makes the fitting adaptable to metric tube merely by changing its inside diameter (see Table 2). Due to the popularity and simplicity of the 37 flare fitting, many manufacturers offer the product. Even though most manufacturers conform to the same dimensional standards, there are significant performance advantages with Parker s Triple-Lok fittings due to Parker s optimized manufacturing methods and commitment to quality. Small seal area allows for adequate clamping load applied with relatively low assembly torques Seal Flare Support resisting opening of flare Fig. 2 Triple-Lok Design and Features Bearing Surface Sleeve Flared Tube Clamping and Sealing Surface of tube flare against body nose Dimensions and pressures for reference only, subject to change. 28 Parker Hannifin Corporation

31 Materials and Manufacture Triple-Lok fitting components are manufactured using state-ofthe-art equipment and manufacturing technologies to assure construction integrity, optimum strength and toughness, long service life and the highest quality. At the heart of the Triple-Lok product line are the finest raw materials and manufacturing technologies as outlined in Table 1 and discussed below. The Triple-Lok Body: Triple-Lok fittings are manufactured in over 65 configurations. Straight bodies are either cold formed or machined from cold drawn bar stock. The cold forming process ensures consistent dimensional tolerances, improved mechanical properties and better surface finishes. Shaped Triple-Lok fittings are manufactured from a one-piece forged construction. This forged construction eliminates the potential leak path associated with multi-component brazed fittings. Triple-Lok steel forged shapes also feature an optimum combination of hardness and toughness for high-pressure capability, minimal nose collapse (typical of sizes -10 and under) during repeated assembly and long service life, even under severe operating conditions. The Triple-Lok Sleeves: Most steel Triple-Lok flare support sleeves are cold formed and heat treated for an optimum combination of strength and ductility. The largest size sleeves, -20, -24, and -32, are machined from high strength steel. Stainless steel and brass sleeves are machined from cold drawn barstock. The Triple-Lok Tube Nuts: Triple-Lok steel tube nuts are cold formed, except in sizes 20, -24, and -32, which are machined from cold drawn barstock. Cold forming increases the material strength and its fatigue properties, imparting high strength and longer service life to the nuts. Smaller stainless steel nuts are also cold formed while all brass tube nuts are manufactured from cold drawn brass barstock. Most crimp swivel nuts are also cold formed. Robust Port Stud: The adjustable port stud is manufactured with a longer locknut designed to cover the uppermost threads completely. Since the backup washer is never exposed to the upper threads, it cannot be damaged during assembly. During assembly, exposed upper threads, as common with fittings from other fitting manufacturers, can lead to a deformed backup washer that can pinch the o-ring and create an o-ring extrusion gap that has the potential to leak. The longer locknut also provides a greater grip area for the wrench. Dual Angle Female Seat: The seat of the female swivel is manufactured with a dual angle that accepts both the 37 flare and 45 flare fitting (only sizes 4, 5, 8 and flare fittings). The dual angle seat also repositions the seal location away from the tip of the male flare nose, preventing the nose from biting into the seat and making it more tolerant to minor nose tip damage. Triple-Lok 37 Flare Tube Fittings and How Triple-Lok Fittings Work Tightening of the nut clamps the tube flare between the body nose (seat) producing a leak tight connection. This clamping on the 37 taper provides a measure of elasticity to the joint helping it to resist loosening under vibration. The clamping force results in a small radial load that tends to deform the fitting nose radially. The resistance of the nose to elastic deformation provides a constant preload (similar to a lockwasher) keeping it tight. The clamping force provided by the nut resists the opposing force of the fluid under pressure. The joint remains leak tight as long as the clamping force is higher than the opposing pressure load. Properly assembled Triple-Lok fittings with appropriate tube will seal consistently under pressure until tube bursts. Sealing in Triple-Lok fittings takes place between two smooth metal surfaces, the fitting nose and inside of the tube flare. Therefore, the sealing surfaces have to be smooth, free of any nicks, scratches, spiral tool marks, splits or weld beads. Seamless or welded and drawn fully annealed tube is recommended for Triple-Lok fittings for ease in flaring and bending. Certain types of harder tubes that are not fully annealed may not be suitable for flaring due to the potential for immediate or long-term cracking of the tube flare. For specific tube type and wall thickness recommendations, please see Table 3. Triple-Lok Fittings Cold Formed Bodies Forged Bodies Bar Stock Bodies Cold Formed Nuts Bar Stock Tube Nuts Cold Formed Sleeves Bar Stock Sleeves Steel Stainless Steel Brass ASTM Type ASTM Type ASTM Type A576 C1010/ C / A576 A B124 CA A108 12L14 A A576 C1010/ C1008 A108 12L14 A SAE 1020 SAE 1020 B16 B453 CA360 CA345 A B121 CA335 B16 B453 B111 CA360 CA345 CA443 CA444 A108 C1137 A B371 CA694 Table 1 Standard Material Specifications for Triple-Lok Fittings Note: On request, Triple-Lok fittings can be furnished in materials other than those shown above. Finish: Zinc clear chromate (chromium 6 free). Dimensions and pressures for reference only, subject to change. 29 Parker Hannifin Corporation

32 International Acceptance The Triple-Lok male flare end is attachable to either inch tube, metric tube or a hose assembly. Parker offers many different port thread options for the various international hydraulic ports available. This is one of the primary reasons for its worldwide acceptance. Parker has traditionally offered a Metric Triple-Lok product line directed at the Metric, ISO-6149 and BSPP port users. Rather than carrying a separate catalog section, this range of international fittings has been integrated into the traditional Triple-Lok section. To illustrate the versatility of Triple-Lok, refer to Fig. 3. A single 37 fitting body will accept both inch and metric tube sizes by simply changing the sleeve. Thus, a dedicated line of sleeves is offered for inch and metric tube. The universal tube nut and fitting body is used with either inch or metric tube, thus saving on component costs and making the Triple-Lok fitting more versatile. Also, the 37 body without the nut and sleeve is very popular as a hose adapter. Study the following example illustrating the options with an SAE 8 (1/2") Triple-Lok fitting: 1. Fitting with a 8 (1/2") sleeve and 8 (1/2") tube nut can connect to a 1/2 o.d. flared tube. 2. Fitting with a 12 mm sleeve and 8 (1/2") tube nut can connect to 12 mm o.d. flared tube 3. Fitting without a nut and sleeve can be used as a 1/2" hose adapter when connected to a hose swivel. Table C2 illustrates an even clearer picture of the flexibility of the Triple-Lok 37 system. It shows every convertible sleeve connection for the 37 flare design. For example, if 25 mm tube is being used, a 16 (1") 37 flare fitting together with a 25 mm (TXS25) sleeve and a standard 16 (1 ) flare fitting nut would be all the necessary components to connect and seal a 25 mm flared tube assembly. Tube Wall Thickness Inch and Metric Minimum/Maximum tube wall thickness is based on the pressure holding capacity of the fittings and subject to maximum wall thickness limitations. Triple-Lok 37 Flare Tube Fittings and Metric Tube Universal Triple-Lok Body Inch Tube Metric Sleeve Inch Sleeve Universal Tube Nut Hose Assembly Fig. 3 Triple-Lok s Adaptability to Inch Tube, Metric Tube, or Hose Assemblies Fitting Metric Tube Dash Tube Sleeve Nut Size O.D. Part # Part # -4 6mm TXS6 4 BTX-S -5 8mm 5 TX-S 5 BTX-S -6 10mm TXS10 6 BTX-S -8 12mm TXS12 8 BTX-S mm TXS14 10 BTX-S mm TXS15 10 BTX-S mm 10 TX-S 10 BTX-S mm TXS18 12 BTX-S mm TX-S BTX-S mm TXS22 14 BTX-S mm TXS25 16 BTX-S mm TXS28 20 BTX-S mm TXS30 20 BTX-S mm TXS32 20 BTX-S mm TXS35 24 BTX-S mm 24 TX-S 24 BTX-S Table 2 Triple-Lok Convertible Sleeve Connections Wall Thickness Wall Thickness Inch Tube Metric Tube Fitting Dash O.D. Wall Thickness O.D. Wall Thickness Size Min. Max. (mm) Min. (mm) Max. -2 1/ / / / / / / / / / / / / / / Table 3 Wall Thickness Chart for Inch and Metric Tubing Dimensions and pressures for reference only, subject to change. 30 Parker Hannifin Corporation

33 Triple-Lok 37 Flare Tube Fittings and BTX Nut 37 Flare SAE C T6 HEX D L FROM STOCK (mm) UN/UNF-2B -S 2 BTX 1/8 5/ / BTX 3/16 3/8-24 7/ BTX 1/4 6 7/ / BTX 5/16 8 1/2-20 5/ BTX 3/8 10 9/ / BTX 1/2 12 3/4-16 7/ BTX 5/8 14, 15, 16 7/ BTX 3/ / / BTX / mm 21.9 mm 26.0 mm 14 BTX 7/8 1 3/ / BTX / / BTX 1 1/4 28, 30, / BTX 1 1/2 35, / / BTX 2 42, / / TX Sleeve 37 Flare END SIZE FROM STOCK -S L X 2 TX 1/ TX 3/ TX 1/ TX 5/ TX 3/ TX 1/ TX 5/ TX 3/ TX 7/ TX TX 1 1/ TX 3/ TX 1 1/ TX SBR Braze Ring (For use with XHB3) O.D. A DIA. C ØA B ØE FROM STOCK -S B C E 4SBR 1/ SBR 3/ SBR 1/ SBR 5/ SBR 3/ SBR SBR 1 1/ SBR 1 1/ SBR WLN Bulkhead Locknut SAE and O.D. C2 HEX FROM STOCK -S T1 3 WLN 3/16 5/ WLN 1/4 11/ WLN 5/16 3/ WLN 3/8 13/ WLN 1/ WLN 5/8 1 1/ WLN 3/4 1 3/ WLN 7/8 1 1/ WLN 1 1 5/ WLN 1 1/4 1 7/ WLN 1 1/2 2 1/ WLN 2 2 3/ LHTX Large Hex Union 37 Flare / 37 Flare SAE C2 1 2 HEX L1 -S 4 LHTX 1/4 1/4 11/ LHTX 5/16 5/16 3/ LHTX 3/8 3/8 13/ LHTX 1/2 1/ LHTX 5/8 5/8 1 1/ LHTX 3/4 3/4 1 3/ LHTX / Parker Hannifin Corporation

34 HTX Union 37 Flare / 37 Flare SAE C 1 2 HEX L1 -S 2 HTX 1/8 1/8 7/ HTX 3/16 3/16 7/ HTX 1/4 1/4 1/ HTX 3/8 1/4 5/ HTX 1/2 1/4 13/ HTX 5/16 5/16 9/ HTX 3/8 3/8 5/ HTX 1/2 3/8 13/ HTX 1/2 1/2 13/ HTX 5/8 1/2 15/ HTX 5/8 5/8 15/ HTX 3/4 5/8 1 1/ HTX 3/4 3/4 1 1/ HTX 1 3/4 1 3/ HTX 7/8 7/8 1 1/ HTX / HTX 1 1/4 1 1/4 1 11/ HTX 1 1/2 1 1/ HTX / Triple-Lok 37 Flare Tube Fittings and WF5OX ORB Bulkhead Connector 37 Flare / ORB WF5OX-WLN Body with locknut (See page 31 for WLN) W* Bulkhead pilot dia. recommended clearance hole over W dia. MAX BULKHEAD C C2 WALL 1 2 HEX HEX I1 L THICKNESS UN/UNF-2A -S 4 WF5OX 1/4 7/ /16 11/ WF5OX 3/8 9/ /16 13/ WF5OX 1/2 3/ WF5OX 5/8 7/ /8 1 1/ WF5OX 3/4 1 1/ /8 1 3/ WF5OX 1 1 5/ /8 1 5/ WTX Bulkhead Union 37 Flare / 37 Flare SAE WTX-WLN Body with locknut (See page 31 for WLN) W* Bulkhead pilot dia. recommended clearance hole over W dia. END MAX SIZE BULKHEAD C C2 W WALL 1 & 2 HEX HEX I1 L4 DIA THICKNESS -S 3 WTX 3/16 5/8 5/ WTX 1/4 11/16 11/ WTX 5/16 3/4 3/ WTX 3/8 13/16 13/ WTX 1/ WTX 5/8 1 1/8 1 1/ WTX 3/4 1 3/8 1 3/ WTX 7/8 1 1/2 1 1/ WTX 1 1 5/8 1 5/ WTX 1 1/4 1 7/8 1 7/ WTX 1 1/2 2 1/8 2 1/ WTX 2 2 3/4 2 3/ Parker Hannifin Corporation

35 Triple-Lok 37 Flare Tube Fittings and XHLO Male Adapter 37 Flare / ORFS H 1 2 FF HEX UN/UNF-2A UN/UNF-2A -S 4 XHLO 9/ / / XHLO 11/ / / XHLO 13/ / / XHLO / / XHLO 1 3/ / / XHLO 1 7/ / / XHLO 1 11/ / / XHLO / /8 2.0 WFTX Male Bulkhead Connector 37 Flare / NPTF WFTX-WLN Body with locknut (See page 31 for WLN) W* Bulkhead pilot dia. recommended clearance hole over W dia. MAX BULKHEAD C C2 WALL 1 2 HEX HEX I1 L THICKNESS NPTF -S 4 WFTX 1/4 1/ /16 11/ WFTX 1/4 1/ /16 11/ WFTX 3/8 1/ /16 13/ WFTX 3/8 3/8-18 3/4 13/ WFTX 1/2 3/ WFTX 1/2 1/ WFTX 5/8 1/ /8 1 1/ WFTX 3/4 3/ /8 1 3/ WFTX /2 1 5/8 1 5/ WGTX Female Bulkhead Connector 37 Flare / NPTF WGTX-WLN Body with locknut (See page 31 for WLN) W* Bulkhead pilot dia. recommended clearance hole over W dia. MAX BULKHEAD C C2 W WALL 1 2 HEX HEX I1 L7 DIA THICKNESS NPTF -S 4 WGTX 1/4 1/ /16 11/ WGTX 1/4 1/ /16 3/ WGTX 3/8 1/ /16 13/ WGTX 3/8 3/ /16 7/ WGTX 1/2 3/ WGTX 1/2 1/ / WGTX 5/8 1/ /8 1 1/ WGTX 3/4 3/ /8 1 3/ WGTX 7/8 3/ /8 1 1/ WGTX /2 1 5/8 1 5/ WGTX 1 1/2 1 1/2-11 1/2 2 1/8 2 1/ Parker Hannifin Corporation

36 Triple-Lok 37 Flare Tube Fittings and XHX6 Extender and Expander 37 Flare / 37 Flare Swivel C 1 2 HEX L -S 6 XHX6 3/8 3/8 5/ XHX6 3/8 1/4 5/ XHX6 1/2 1/2 13/ XHX6 1/2 3/8 13/ XHX6 5/8 5/ XHX6 5/8 1/2 15/ XHX6 3/4 3/4 1 1/ XHX6 3/4 5/8 1 1/ XHX / XHX6 1 3/4 1 1/ XHX6 1 1/ / TRTX Reducer 37 Flare SAE / SAE A TRTXN 2-piece (Nut and Insert) TRTXN 1-piece (Non-swivel) TRTX (Insert only) TRTXN 2-pc. Design (with Large Nut) TRTXN 1-pc. Design (Machined Female) TRTX Reducer Insert (For 2-pc. Design Only) 2 C HEX L (TRTX) LA (TRTXN) L1 (TRTX & TRTXN) -S TRTXN 4-2 TRTX 1/4 1/8 9/ TRTXN 1/4 3/16 9/ TRTXN 5/16 1/4 5/ TRTXN 6-4 TRTX 3/8 1/4 11/ TRTXN 3/8 5/16 11/ TRTXN 8-4 TRTX 1/2 1/4 7/ TRTXN 8-6 TRTX 1/2 3/8 7/ TRTXN 10-4 TRTX 5/8 1/ TRTXN 10-6 TRTX 5/8 3/ TRTXN 5/8 1/ TRTXN 12-4 TRTX 3/4 1/4 1 1/ TRTXN 12-6 TRTX 3/4 3/8 1 1/ TRTXN 12-8 TRTX 3/4 1/2 1 1/ TRTXN 3/4 5/8 1 1/ TRTXN 14-6 TRTX 7/8 3/8 1 3/ TRTXN TRTX 7/8 5/8 1 3/ TRTXN 7/8 3/4 1 3/ TRTXN 16-4 TRTX 1 1/4 1 1/ TRTXN 16-6 TRTX 1 3/8 1 1/ TRTXN 16-8 TRTX 1 1/2 1 1/ TRTXN TRTX 1 5/8 1 1/ TRTXN TRTX 1 3/4 1 1/ TRTXN 1 7/8 1 1/ TRTXN TRTX 1 1/4 3/ TRTXN TRTX 1 1/ TRTXN 24-8 TRTX 1 1/2 1/2 2 1/ TRTXN TRTX 1 1/2 3/4 2 1/ TRTXN TRTX 1 1/ / TRTXN TRTX 1 1/2 1 1/4 2 1/ TRTXN TRTX 2 1 1/2 2 7/ Parker Hannifin Corporation

37 F5OX Straight Thread Connector 37 Flare / SAE-ORB SAE C4 1 2 HEX L5 UN/UNF-2A -S 2 F5OX 1/8 5/ / F5OX 3/16 3/8-24 1/ F5OX 1/4 7/ / F5OX 1/4 1/2-20 5/ F5OX 1/4 9/ / F5OX 1/4 3/4-16 7/ F5OX 1/4 7/ F5OX 5/16 1/2-20 5/ F5OX 5/16 7/ / F5OX 5/16 9/ / F5OX 5/16 3/4-16 7/ F5OX 3/8 9/ / F5OX 3/8 7/ / F5OX 3/8 1/2-20 5/ F5OX 3/8 3/4-16 7/ F5OX 3/8 7/ F5OX 3/8 1 1/ / F5OX 1/2 3/4-16 7/ F5OX 1/2 7/ / F5OX 1/2 9/ / F5OX 1/2 7/ F5OX 1/2 1 1/ / F5OX 1/2 1 5/ / F5OX 5/8 7/ F5OX 5/8 9/ / F5OX 5/8 3/ / F5OX 5/8 1 1/ / F5OX 5/8 1 5/ / F5OX 3/4 1 1/ / F5OX 3/4 3/ / F5OX 3/4 7/ / F5OX 3/4 1 3/ / F5OX 3/4 1 5/ / F5OX 3/4 1 5/ / F5OX 7/8 1 3/ / F5OX 7/8 1 5/ / F5OX 1 1 5/ / F5OX 1 3/ / F5OX 1 7/ / F5OX 1 1 1/ / F5OX 1 1 3/ / F5OX 1 1 5/ / F5OX 1 1/4 1 5/ / F5OX 1 1/4 1 5/ / F5OX 1 1/4 1 7/ / F5OX 1 1/2 1 7/ / F5OX 1 1/2 1 5/ F5OX 2 2 1/ / Triple-Lok 37 Flare Tube Fittings and FF5OX Long Straight Thread Connector 37 Flare / SAE-ORB SAE C4 1 2 HEX L6 UN/UNF-2A -S 4 FF5OX 1/4 7/ / FF5OX 3/8 9/ / FF5OX 1/2 3/4-16 7/ FF5OX 5/8 7/ FF5OX 3/4 1 1/ / FF5OX 1 1 5/ / FF5OX 1 1/4 1 5/ / XHB3 Braze Socket 37 Flare / Inch Tube Braze C4 1 2 HEX L -S 4 XHB3 1/4 1/4 9/ XHB3 3/8 3/8 5/ XHB3 3/8 1/4 5/ XHB3 3/8 1/2 5/ XHB3 1/2 1/2 13/ XHB3 1/2 5/8 13/ XHB3 5/8 5/8 15/ XHB3 5/8 1/2 15/ XHB3 5/8 3/4 1 1/ XHB3 3/4 3/4 1 1/ XHB3 3/4 5/8 1 1/ XHB3 3/ / XHB / XHB /4 1 11/ XHB3 1 1/4 1 1/4 1 11/ XHB3 1 1/4 1 1/ XHB3 1 1/2 1 1/ Note: Used with SBR braze rings. 35 Parker Hannifin Corporation

38 FTX Male Connector 37 Flare / NPTF SAE C 1 2 HEX L NPTF -S 2 FTX 1/8 1/8-27 7/ FTX 3/16 1/8-27 7/ FTX 1/4 1/8-27 1/ FTX 1/4 1/4-18 9/ FTX 1/4 3/8-18 3/ FTX 1/4 1/2-14 7/ FTX 5/16 1/8-27 9/ FTX 5/16 1/4-18 9/ FTX 5/16 3/8-18 3/ FTX 3/8 1/4-18 5/ FTX 3/8 1/8-27 5/ FTX 3/8 3/8-18 3/ FTX 3/8 1/2-14 7/ FTX 1/2 3/ / FTX 1/2 1/ / FTX 1/2 1/ / FTX 1/2 1/2-14 7/ FTX 1/2 3/ / FTX 1/ /2 1 3/ FTX 5/8 1/ / FTX 5/8 3/ / FTX 5/8 3/ / FTX 3/4 3/ / FTX 3/4 3/ / FTX 3/4 1/ / FTX 3/ /2 1 3/ FTX 3/4 1 1/4-11 1/2 1 11/ FTX 7/8 3/ / FTX /2 1 3/ FTX 1 1/ / FTX 1 3/ / FTX 1 1 1/4-11 1/2 1 11/ FTX 1 1 1/2-11 1/ FTX 1 1/4 1 1/4-11 1/2 1 11/ FTX 1 1/ /2 1 11/ FTX 1 1/4 1 1/2-11 1/ FTX 1 1/2 1 1/2-11 1/ FTX 1 1/ / FTX 1 1/2 1 1/4-11 1/ FTX /2 2 5/ FTX 2 1/2 2 1/ / Triple-Lok 37 Flare Tube Fittings and FFTX Long Male Connector 37 Flare / NPTF SAE C L NPTF -S 4 FFTX 1/4 1/8-27 1/ FFTX 1/4 1/4-18 9/ FFTX 3/8 1/4-18 5/ FFTX 3/8 3/8-18 3/ FFTX 1/2 3/ / FFTX 1/2 1/ / FFTX 5/8 1/ / FFTX 3/4 3/ / GTX Female Connector 37 Flare / NPTF SAE C1 1 2 HEX L2 NPTF -S 2 GTX 1/8 1/8-27 9/ GTX 1/4 1/8-27 9/ GTX 1/4 1/4-18 3/ GTX 5/16 1/8-27 9/ GTX 5/16 1/4-18 3/ GTX 3/8 1/4-18 3/ GTX 3/8 3/8-18 7/ GTX 1/2 3/8-18 7/ GTX 1/2 1/ / GTX 1/2 3/ / GTX 5/8 1/ / GTX 5/8 3/ / GTX 3/4 3/ / GTX 3/4 1/ / GTX 3/ /2 1 5/ GTX 7/8 3/ / GTX /2 1 5/ GTX 1 3/ / GTX 1 1 1/4-11 1/ GTX 1 1/4 1 1/4-11 1/ GTX 1 1/ /2 1 3/ GTX 1 1/2 1 1/2-11 1/2 2 3/ GTX /2 2 7/ Parker Hannifin Corporation

39 F87OMX Male Connector ISO Flare / ISO 6149 Triple-Lok 37 Flare Tube Fittings and F82EDMX Male Connector Metric 37 Flare / Metric-ED 1 2 Male Metric (mm) Parallel Thread C (mm) P (mm) -S 4M10F87OMX 6 1/4 M10x M12F87OMX 8 5/16 M12x M14F87OMX 10 3/8 M14x M16F87OMX 10 3/8 M16x M16F87OMX 12 1/2 M16x M18F87OMX 12 1/2 M18x M18F87OMX 14,15,16 5/8 M18x M22F87OMX 14,15,16 5/8 M22x M22F87OMX 18,20 3/4 M22x M27F87OMX 18,20 3/4 M27x M27F87OMX 25 1 M27x M33F87OMX 25 1 M33x M42F87OMX 30,32 1 1/4 M42x M48F87OMX /2 M48x Male Metric (mm) Parallel Thread C4 (mm) L5 (mm) -S 4M10F82EDMX 6 1/4 M10x M12F82EDMX 8 5/16 M12x M14F82EDMX 10 3/8 M14x M16F82EDMX 10 3/8 M16x M16F82EDMX 12 1/2 M16x M18F82EDMX 12 1/2 M18x M18F82EDMX 14,15,16 5/8 M18x M22F82EDMX 14,15,16 5/8 M22x M22F82EDMX 18,20 3/4 M22x M27F82EDMX 18,20 3/4 M27x M33F82EDMX 25 1 M33x M42F82EDMX 30,32 1 1/4 M42x F8OMX Male Connector Metric 37 Flare / Metric-ORR F42EDMX Male Connector BSPP 37 Flare / BSPP-ED 1 2 Male Metric (mm) Parallel Thread C (mm) P (mm) -S 4M10F8OMX 6 1/4 M10x M12F8OMX 8 5/16 M12x M14F8OMX 10 3/8 M14x M16F8OMX 12 1/2 M16x M18F8OMX 12 1/2 M18x M18F8OMX 14,15,16 5/8 M18x M20F8OMX 14,15,16 5/8 M20x M22F8OMX 14,15,16 5/8 M22x M22F8OMX 18,20 3/4 M22x M24F8OMX 18,20 3/4 M24x M27F8OMX 18,20 3/4 M27x M27F8OMX 25 1 M27x M33F8OMX 25 1 M33x M42F8OMX 30,32 1 1/4 M42x Note: If F8OMX is not available, use F82EDMX. 1 2 C4 L5 (mm) BSPP (mm) (mm) -S 4F42EDMX 6 1/4 1/ F42EDMX 6 1/4 1/ F42EDMX 6 1/4 3/ F42EDMX 6 1/4 1/ F42EDMX 8 5/16 1/ F42EDMX 8 5/16 1/ F42EDMX 8 5/16 3/ F42EDMX 10 3/8 1/ F42EDMX 10 3/8 1/ F42EDMX 10 3/8 3/ F42EDMX 10 3/8 1/ F42EDMX 12 1/2 3/ F42EDMX 12 1/2 1/ F42EDMX 12 1/2 1/ F42EDMX 12 1/2 3/ F42EDMX 14,15,16 5/8 1/ F42EDMX 14,15,16 5/8 3/ F42EDMX 14,15,16 5/8 3/ F42EDMX 18,20 3/4 3/ F42EDMX 18,20 3/4 3/ F42EDMX 18,20 3/4 1/ F42EDMX 18,20 3/ F42EDMX F42EDMX / F42EDMX / F42EDMX 30,32 1 1/ F42EDMX 30,32 1 1/4 1 1/ F42EDMX 30,32 1 1/4 1 1/ F42EDMX /2 1 1/ F42EDMX /2 1 1/ Parker Hannifin Corporation

40 F4OMX Male Connector BSPP 37 Flare / BSPP-ORR Triple-Lok 37 Flare Tube Fittings and F3MX Male Connector BSPT 37 Flare / BSPT 1 2 C4 L5 (mm) BSPP (mm) (mm) -S 4F4OMX 6 1/4 1/ F4OMX 6 1/4 1/ F4OMX 6 1/4 3/ F4OMX 6 1/4 1/ F4OMX 8 5/16 1/ F4OMX 8 5/16 3/ F4OMX 10 3/8 1/ F4OMX 10 3/8 3/ F4OMX 10 3/8 1/ F4OMX 12 1/2 3/ F4OMX 12 1/2 1/ F4OMX 12 1/2 1/ F4OMX 12 1/2 3/ F4OMX 14,15,16 5/8 1/ F4OMX 14,15,16 5/8 3/ F4OMX 18,20 3/4 3/ F4OMX 18,20 3/4 1/ F4OMX 18,20 3/ F4OMX F4OMX / F4OMX / F4OMX 30,32 1 1/4 1 1/ F4OMX /2 1 1/ F4OMX /2 1 1/ Note: If F4OMX is not available, use F42EDMX. C 1 2 HEX L (mm) BSPT (mm) (mm) -S 4F3MX 6 1/4 1/ F3MX 6 1/4 1/ F3MX 8 5/16 1/ F3MX 8 5/16 1/ F3MX 10 3/8 1/ F3MX 10 3/8 3/ F3MX 10 3/8 1/ F3MX 12 1/2 3/ F3MX 12 1/2 1/ F3MX 12 1/2 1/ F3MX 14,15,16 5/8 1/ F3MX 14,15,16 5/8 3/ F3MX 14,15,16 5/8 3/ F3MX 18,20 3/4 3/ F3MX 18,20 3/4 1/ F3MX 18,20 3/ F3MX F3MX / F3MX 30,32 1 1/ F3MX 30,32 1 1/4 1 1/ F3MX /2 1 1/ HX6 Swivel Nut Union 37 Swivel / 37 Swivel F65OX Swivel Straight Thread Connector 37 Swivel / SAE-ORB END SIZE 1 & 2 C4 HEX L -S 4 HX6 1/4 9/ HX6 3/8 11/ HX6 1/2 7/ HX6 5/ HX6 3/4 1 1/ HX / C4 1 2 A HEX UN/UNF-2A -S 4 F65OX 1/4 7/ / F65OX 1/4 9/ / F65OX 5/16 1/ / F65OX 3/8 9/ / F65OX 3/8 7/ / F65OX 3/8 3/ / F65OX 1/2 3/ / F65OX 1/2 9/ / F65OX 1/2 7/ / F65OX 5/8 7/ F65OX 5/8 3/ F65OX 3/4 7/ / F65OX 5/8 1 1/ / F65OX 3/4 1 1/ / F65OX 3/4 1 5/ / F65OX 1 1 5/ / F65OX 1 1 1/ / F65OX 1 1/4 1 5/ Parker Hannifin Corporation

41 Triple-Lok 37 Flare Tube Fittings and XHL6 Male Swivel Adapter ORFS Swivel / 37 Flare 1 2 B H END UN/UNF-2A SWIVEL UN/UNF-2B HEX FF HEX -S 4 XHL6 7/ / / / XHL6 9/ / / / XHL6 3/ / / / XHL6 7/ / / XHL6 1 1/ / / / XHL6 1 5/ / / / XHL6 1 5/ / / / LOHX6 Swivel Adapter 37 Flare Swivel / ORFS LL* End to base of flare 1 2 C3 H SWIVEL UN/UNF-2B END UN/UNF-2A HEX HEX LL -S 4 LOHX6 7/ / /16 5/ LOHX6 9/ / /8 3/ LOHX6 3/ / / LOHX6 7/ /8 1 1/ LOHX6 1 1/ / /4 1 1/ LOHX6 1 5/ / /2 1 1/ LOHX6 1 5/ / / F6X Swivel Connector 37 Swivel / NPTF G6X Swivel Nut Female Connector 37 Swivel / NPTF 1 2 C4 L8 NPTF -S 4 F6X 1/4 1/8-27 9/ F6X 1/4 1/4-18 9/ F6X 5/16 1/4-18 5/ F6X 3/8 1/ / F6X 3/8 3/8-18 3/ F6X 1/2 3/8-18 7/ F6X 1/2 1/2-14 7/ F6X 5/8 1/ F6X 5/8 3/ F6X 3/4 3/ / F6X 3/4 1/ / F6X /2 1 1/ F6X 1 3/ / F6X 1 1/4 1 1/4-11 1/ F6X 1 1/2 1 1/2-11 1/2 2 1/ NPTF C1 L -S 4 G6X 1/4 1/8-27 9/ G6X 1/4 1/4-18 3/ G6X 3/8 1/4-18 3/ G6X 3/8 3/8-18 7/ G6X 3/8 1/ / G6X 1/2 3/8-18 7/ G6X 1/2 1/ / G6X 5/8 1/ / G6X 3/4 3/ / G6X 3/4 1/ / G6X /2 1 5/ G6X 1 1/4 1 1/4-11 1/ G6X 1 1/2 1 1/2-11 1/2 2 3/ G6X /2 2 7/ Parker Hannifin Corporation

42 Triple-Lok 37 Flare Tube Fittings and F68OMX Swivel Metric ORR Connector Metric-ORR / 37 Swivel 1 END UN/UNF-2B 2 MALE METRIC PARALLEL A (mm) C4 (mm) -S 4M10F68OMX 7/16-20 M10x M12F68OMX 1/2-20 M12x M14F68OMX 9/16-18 M14x M16F68OMX 3/4-16 M16x M22F68OMX 7/8-14 M22x M27F68OMX 1 1/16-12 M27x WNTX 45 Blulkhead Union Elbow 37 Flare / 37 Flare SAE WNTX-WLN Body with locknut (See page 31 for WLN) Y* Across wrench flats. W** Bulkhead pilot dia. recommended clearance hole over W dia. END MAX SIZE BULKHEAD C2 W WALL 1 & 2 HEX I2 K1 M2 M9 DIA THICKNESS Y -S 4 WNTX 1/4 11/ / WNTX 5/16 3/ / WNTX 3/8 13/ / WNTX 1/ / WNTX 5/8 1 1/ / WNTX 3/4 1 3/ / WNTX 1 1 5/ / WNTX 1 1/4 1 7/ / Parker Hannifin Corporation

43 V6X 45 Swivel Nut Elbow 37 Flare / 37 Swivel SAE V5OX 45 Straight Thread Elbow 37 Flare / SAE-ORB SAE END SIZE Y* Across wrench flats 1 & 2 M2 M6 Y -S 4 V6X 1/ / V6X 5/ / V6X 3/ / V6X 1/ / V6X 5/ / V6X 3/ / V6X 7/ / V6X / V6X 1 1/ / V6X 1 1/ / V6X /2 2.0 Y* Across wrench flats 1 2 M2 M8 Y UN/UNF-2A -S 4 V5OX 1/4 7/ / V5OX 1/4 9/ / V5OX 5/16 1/ / V5OX 3/8 9/ / V5OX 3/8 7/ / V5OX 3/8 3/ / V5OX 1/2 3/ / V5OX 1/2 9/ / V5OX 1/2 7/ / V5OX 1/2 1 1/ / V5OX 5/8 7/ / V5OX 5/8 3/ / V5OX 5/8 1 1/ / V5OX 3/4 1 1/ / V5OX 3/4 7/ / V5OX 3/4 1 5/ / V5OX 7/8 1 3/ / V5OX 1 1 5/ / V5OX 1 1 1/ / V5OX 1 1 5/ / V5OX 1 1/4 1 5/ / V5OX 1 1/4 1 5/ / V5OX 1 1/2 1 7/ / V5OX 2 2 1/ /2 2.0 Triple-Lok 37 Flare Tube Fittings and VTX 45 Male Elbow 37 Flare / NPTF SAE Y* Across wrench flats 1 2 M2 N2 Y NPTF -S 2 VTX 1/8 1/ / VTX 3/16 1/ / VTX 1/4 1/ / VTX 1/4 1/ / VTX 5/16 1/ / VTX 5/16 1/ / VTX 3/8 1/ / VTX 3/8 1/ / VTX 3/8 3/ / VTX 3/8 1/ / VTX 1/2 3/ / VTX 1/2 1/ / VTX 1/2 1/ / VTX 1/2 3/ / VTX 5/8 1/ / VTX 5/8 3/ / VTX 5/8 3/ / VTX 3/4 3/ / VTX 3/4 1/ / VTX 3/ / / VTX 7/8 3/ / VTX / / VTX 1 3/ / VTX 1 1 1/4-11 1/ / VTX 1 1/4 1 1/4-11 1/ / VTX 1 1/ / / VTX 1 1/2 1 1/2-11 1/ / VTX / /2 2.0 ETX Union Elbow 37 Flare / 37 Flare SAE Y* Across wrench flats 1 2 M M1 Y -S 2 ETX 1/8 1/ / ETX 1/4 1/ / ETX 5/16 5/ / ETX 3/8 3/ / ETX 1/2 1/ / ETX 5/8 5/ / ETX 3/4 3/ / ETX 7/8 7/ / ETX / ETX 1 1/4 1 1/ / ETX 1 1/2 1 1/ / ETX / Parker Hannifin Corporation

44 C6X Swivel Nut Elbow 37 Flare / 37 Swivel Triple-Lok 37 Flare Tube Fittings and X6EF Swivel Elbow Connector 37 Swivel / NPTF SAE Y* Across wrench flats 1 2 M M5 Y -S 3 C6X 3/16 3/ / C6X 1/4 1/ / C6X 5/16 5/ / C6X 3/8 3/ / C6X 1/2 1/ / C6X 5/8 5/ / C6X 3/4 3/ / C6X 7/8 7/ / C6X / C6X 1 1/4 1 1/ / C6X 1 1/2 1 1/ / C6X /2 2.0 Y* Across wrench flats 1 2 M M5 Y NPTF -S 4 X6EF 1/4 1/ / X6EF 1/4 1/ / X6EF 3/8 1/ / X6EF 3/8 3/ / X6EF 1/2 3/ / X6EF 1/2 1/ / X6EF 5/8 1/ / X6EF 3/4 3/ / X6EF / WETX Bulkhead Union Elbow 37 Flare / 37 Flare SAE WETX-WLN Body with locknut (See page 31 for WLN) Y* Across wrench flats. W** Bulkhead pilot dia. recommended clearance hole over W dia. END MAX SIZE BULKHEAD C2 W WALL 1 & 2 HEX I2 K1 M3 M4 DIA THICKNESS Y -S 4 WETX 1/4 11/ / WETX 5/16 3/ / WETX 3/8 13/ / WETX 1/ / WETX 5/8 1 1/ / WETX 3/4 1 3/ / WETX 7/8 1 1/ / WETX 1 1 5/ / WETX 1 1/4 1 7/ / Parker Hannifin Corporation

45 AOEX6 Swivel Elbow Straight Thread Connector SAE-ORB / 37 Swivel Triple-Lok 37 Flare Tube Fittings and C5OX Straight Thread Elbow 37 Flare / SAE-ORB SAE Y* Across wrench flats 1 2 M5 M7 Y UN/UNF-2A -S 4 AOEX6 1/4 7/ / AOEX6 3/8 9/ / AOEX6 1/2 3/ / AOEX6 5/8 7/ / AOEX6 3/4 1 1/ / AOEX / / CC5OX Long Straight Thread Elbow 37 Flare / SAE-ORB SAE Y* Across wrench flats 1 2 M M9 Y UN/UNF-2A -S 4 CC5OX 1/4 7/ / CC5OX 3/8 9/ / CC5OX 1/2 3/ / CC5OX 5/8 7/ / CC5OX 3/4 1 1/ / CC5OX 1 1 5/ / Y* Across wrench flats 1 2 M M7 Y UN/UNF-2A -S 2 C5OX 1/8 5/ / C5OX 3/16 3/ / C5OX 1/4 7/ / C5OX 1/4 5/ / C5OX 1/4 9/ / C5OX 1/4 3/ / C5OX 5/16 1/ / C5OX 5/16 7/ / C5OX 5/16 9/ / C5OX 3/8 9/ / C5OX 3/8 7/ / C5OX 3/8 1/ / C5OX 3/8 3/ / C5OX 3/8 7/ / C5OX 1/2 3/ / C5OX 1/2 7/ / C5OX 1/2 9/ / C5OX 1/2 7/ / C5OX 1/2 1 1/ / C5OX 1/2 1 5/ / C5OX 5/8 7/ / C5OX 5/8 9/ / C5OX 5/8 3/ / C5OX 5/8 1 1/ / C5OX 5/8 1 5/ / C5OX 3/4 1 1/ / C5OX 3/4 3/ / C5OX 3/4 7/ / C5OX 3/4 1 3/ / C5OX 3/4 1 5/ / C5OX 3/4 1 5/ / C5OX 7/8 1 3/ / C5OX 1 1 5/ / C5OX 1 1 1/ / C5OX 1 1 3/ / C5OX 1 1 5/ / C5OX 1 1 7/ / C5OX 1 1/4 1 5/ / C5OX 1 1/4 1 5/ / C5OX 1 1/4 1 7/ / C5OX 1 1/2 1 7/ / C5OX 1 1/2 1 5/ / C5OX 2 2 1/ / Parker Hannifin Corporation

46 CTX Male Elbow 37 Flare / NPTF Triple-Lok 37 Flare Tube Fittings and CCTX Long Male Elbow 37 Flare / NPTF SAE Y* Across wrench flats SAE Y* Across wrench flats 1 2 M N Y NPTF -S 2 CTX 1/8 1/ / CTX 3/16 1/ / CTX 1/4 1/ / CTX 1/4 1/ / CTX 1/4 3/ / CTX 1/4 1/ / CTX 5/16 1/ / CTX 5/16 1/ / CTX 5/16 3/ / CTX 3/8 1/ / CTX 3/8 1/ / CTX 3/8 3/ / CTX 3/8 1/ / CTX 3/8 3/ / CTX 1/2 3/ / CTX 1/2 1/ / CTX 1/2 1/ / CTX 1/2 3/ / CTX 1/ / / CTX 5/8 1/ / CTX 5/8 3/ / CTX 5/8 3/ / CTX 5/ / / CTX 3/4 3/ / CTX 3/4 3/ / CTX 3/4 1/ / CTX 3/ / / CTX 7/8 3/ / CTX / / CTX 1 1/ / CTX 1 3/ / CTX 1 1 1/4-11 1/ / CTX 1 1/4 1 1/4-11 1/ / CTX 1 1/ / / CTX 1 1/4 1 1/2-11 1/ / CTX 1 1/2 1 1/2-11 1/ / CTX 1 1/ / / CTX 2 1 1/2-11 1/ / CTX / / M N3 Y NPTF -S 4 CCTX 1/4 1/ / CCTX 5/16 1/ / CCTX 1/4 1/ / CCTX 3/8 1/ / CCTX 1/2 3/ / CCTX 5/8 1/ / CCTX 3/4 3/ / CCTX / / CCTX 1 1/4 1 1/4-11 1/ /8 2.5 DTX Femle Elbow 37 Flare / NPTF SAE Y* Across wrench flats 1 2 M1 N1 Y1 NPTF -S 4 DTX 1/4 1/ / DTX 1/4 1/ / DTX 5/16 1/ / DTX 5/16 1/ / DTX 3/8 1/ / DTX 3/8 1/ / DTX 3/8 3/ / DTX 1/2 3/ / DTX 1/2 1/ / DTX 1/2 1/ / DTX 5/8 1/ / DTX 3/4 3/ / DTX 3/4 1/ / DTX 7/8 3/ / DTX / / DTX 1 1/4 1 1/4-11 1/ / DTX 1 1/2 1 1/2-11 1/ / Parker Hannifin Corporation

47 Triple-Lok 37 Flare Tube Fittings and C87OMX Male Elbow ISO Flare / ISO 6149 Y* Across wrench flats 1 2 (mm) Male Metric Parallel Thread M (mm) M7 (mm) Y (mm) -S 4M10C87OMX 6 1/4 M10x M12C87OMX 8 5/16 M12x M14C87OMX 10 3/8 M14x M16C87OMX 12 1/2 M16x M18C87OMX 12 1/2 M18x M18C87OMX 14, 15, 16 5/8 M18x M22C87OMX 14, 15, 16 5/8 M22x M22C87OMX 18, 20 3/4 M22x M27C87OMX 18, 20 3/4 M27x M33C87OMX 25 1 M33x C8OMX Male Elbow Metric-ORR 37 Flare / Metric-ORR 1 2 Y* Across wrench flats (mm) Male Metric Parallel Thread M (mm) M7 (mm) Y (mm) -S 4M10C8OMX 6 1/4 M10x M12C8OMX 8 5/16 M12x M14C8OMX 10 3/8 M14x M16C8OMX 12 1/2 M16x M18C8OMX 12 1/2 M18x M18C8OMX 14, 15, 16 5/8 M18x M22C8OMX 14, 15, 16 5/8 M22x M22C8OMX 18, 20 3/4 M22x M27C8OMX 18, 20 3/4 M27x M33C8OMX 25 1 M33x Parker Hannifin Corporation

48 Triple-Lok 37 Flare Tube Fittings and C4OMX Male Elbow BSPP 37 Flare / BSPP-ORR Y* Across wrench flats 1 2 M M7 Y (mm) BSPP (mm) (mm) (mm) -S 4C4OMX 6 1/4 1/ C4OMX 6 1/4 1/ C4OMX 8 5/16 1/ C4OMX 10 3/8 1/ C4OMX 10 3/8 3/ C4OMX 12 1/2 3/ C4OMX 12 1/2 1/ C4OMX 12 1/2 1/ C4OMX 14,15,16 5/8 1/ C4OMX 15 5/8 3/ C4OMX 18,20 3/4 3/ C4OMX 18,20 3/4 1/ C4OMX C4OMX / C4OMX 30,32 1 1/ C4OMX 30,32 1 1/4 1 1/ C4OMX /2 1 1/ JTX Union Tee 37 Flare (all three ends) SAE Y* Across wrench flats M M1 M2 Y -S 2 JTX 1/8 1/8 1/ / JTX 3/16 3/16 3/ / JTX 1/4 1/4 1/ / JTX 5/16 5/16 5/ / JTX 3/8 3/8 3/ / JTX 1/2 1/2 1/ / JTX 5/8 5/8 5/ / JTX 3/4 3/4 3/ / JTX 7/8 7/8 7/ / JTX / JTX 1 1/4 1 1/4 1 1/ / JTX 1 1/2 1 1/2 1 1/ / JTX / Parker Hannifin Corporation

49 Triple-Lok 37 Flare Tube Fittings and WJTX Bulkhead Branch Tee 37 Flare (all three ends) SAE WJTX-WLN Body with locknut (See page 31 for WLN) Y* Across wrench flats. W** Bulkhead pilot dia. recommended clearance hole over W dia. END MAX SIZE BULKHEAD C2 W WALL 1-3 HEX I2 K1 M3 M4 DIA THICKNESS Y -S 4 WJTX 1/4 11/ / WJTX 3/8 13/ / WJTX 1/ / WJTX 5/8 1 1/ / WJTX 3/4 1 3/ / *** Machined from one-piece milled bar stock. WJJTX Bulkhead Run Tee 37 Flare (all three ends) SAE WJJTX-WLN Body with locknut (See page 31 for WLN) Y* Across wrench flats. W** Bulkhead pilot dia. recommended clearance hole over W dia. END MAX SIZE BULKHEAD C2 W WALL 1-3 HEX I2 K1 M3 M4 DIA THICKNESS Y -S 4 WJJTX 1/4 11/ / WJJTX 3/8 13/ / WJJTX 1/ / WJJTX 5/8 1 1/ / WJJTX 3/4 1 3/ / WJJTX 1 1 5/ /16 *** Machined from one-piece milled bar stock. 47 Parker Hannifin Corporation

50 Triple-Lok 37 Flare Tube Fittings and S6X Swivel Nut Branch Tee 37 Flare / 37 Flare / 37 Swivel SAE Y* Across wrench flats S5OX Straight Thread Branch Tee 37 Flare / 37 Flare / SAE-ORB SAE Y* Across wrench flats END SIZE 1-3 M M5 Y -S 4 S6X 1/ / S6X 5/ / S6X 3/ / S6X 1/ / S6X 5/ / S6X 3/ / S6X 7/ / S6X / S6X 1 1/ / S6X 1 1/ / M M7 Y UN/UNF-2A -S 4 S5OX 1/4 1/4 7/ / S5OX 1/4 1/4 9/ / S5OX 5/16 5/16 1/ / S5OX 3/8 3/8 9/ / S5OX 1/2 1/2 3/ / S5OX 1/2 1/2 7/ / S5OX 5/8 5/8 7/ / S5OX 5/8 5/8 1 1/ / S5OX 3/4 3/4 1 1/ / S5OX 3/4 3/4 1 5/ / S5OX / / S5OX 1 1/4 1 1/4 1 5/ / S5OX 1 1/2 1 1/2 1 7/ / S5OX / R6X Swivel Nut Run Tee 37 Flare / 37 Swivel / 37 Flare SAE Y* Across wrench flats R5OX Straight Thread Run Tee 37 Flare / SAE-ORB / 37 Flare SAE Y* Across wrench flats END SIZE 1-3 M M5 Y -S 4 R6X 1/ / R6X 5/ / R6X 3/ / R6X 1/ / R6X 5/ / R6X 3/ / R6X 7/ / R6X / R6X 1 1/ / R6X 1 1/ / M M7 Y UN/UNF-2A -S 4 R5OX 1/4 7/ / / R5OX 1/4 9/ / / R5OX 5/16 1/2-20 5/ / R5OX 3/8 9/ / / R5OX 3/8 3/4-16 3/ / R5OX 1/2 3/4-16 1/ / R5OX 1/2 7/8-14 1/ / R5OX 5/8 7/8-14 5/ / R5OX 5/8 1 1/ / / R5OX 3/4 1 1/ / / R5OX 3/4 1 5/ / / R5OX 1 1 5/ / R5OX 1 1/4 1 5/ / / R5OX 1 1/2 1 7/ / / R5OX 2 2 1/ / Parker Hannifin Corporation

51 STX Male Branch Tee 37 Flare / 37 Flare / NPTF SAE Triple-Lok 37 Flare Tube Fittings and OTX Female Branch Tee 37 Flare / 37 Flare / NPTF SAE Y* Across wrench flats Y1* Across wrench flats 1 & 2 3 M N Y NPTF -S 3 STX 3/16 1/ / STX 1/4 1/ / STX 1/4 1/ / STX 5/16 1/ / STX 3/8 1/ / STX 3/8 3/ / STX 1/2 3/ / STX 1/2 1/ / STX 5/8 1/ / STX 3/4 3/ / STX 7/8 3/ / STX / / STX 1 1/4 1 1/4-11 1/ / STX 1 1/2 1 1/2-11 1/ / & 2 3 M1 N1 Y1 NPTF -S 4 OTX 1/4 1/ / OTX 5/16 1/ / OTX 3/8 1/ / OTX 3/8 3/ / OTX 1/2 3/ / OTX 1/2 1/ / OTX 3/4 3/ / OTX 7/8 3/ / OTX / / OTX 1 1/4 1 1/4-11 1/ / OTX 1 1/2 1 1/2-11 1/ /2 1.5 RTX Male Run Tee 37 Flare / NPTF / 37 Flare SAE KTX Union Cross 37 Flare (all four ends) SAE Y* Across wrench flats 1 & 2 3 M N Y NPTF -S 3 RTX 3/16 1/ / RTX 1/4 1/ / RTX 1/4 1/ / RTX 5/16 1/ / RTX 3/8 3/ / RTX 1/2 3/ / RTX 1/2 1/ / RTX 5/8 1/ / RTX 3/4 1/ /16 12 RTX 3/4 3/ / RTX 7/8 3/ / RTX / / RTX 1 1/4 1 1/4-11 1/ /8 2.5 END SIZE Y* Across wrench flats 1-4 M Y -S 4 KTX 1/ / KTX 5/ / KTX 3/ / KTX 1/ / KTX 5/ / KTX 3/ / KTX / Parker Hannifin Corporation

52 FNTX Cap 37 Flare SAE END SIZE 1 C HEX Z -S 2 FNTX 1/8 3/ FNTX 3/16 7/ FNTX 1/4 9/ FNTX 5/16 5/ FNTX 3/8 11/ FNTX 1/2 7/ FNTX 5/ FNTX 3/4 1 1/ FNTX 7/8 1 3/ FNTX 1 1 1/ FNTX 1 1/ FNTX 1 1/2 2 1/ FNTX 2 2 7/ Triple-Lok 37 Flare Tube Fittings and PNTX Plug 37 Flare SAE END SIZE 1 C HEX L3 -S 3 PNTX 3/16 7/ PNTX 1/4 1/ PNTX 5/16 9/ PNTX 3/8 5/ PNTX 1/2 13/ PNTX 5/8 15/ PNTX 3/4 1 1/ PNTX 7/8 1 1/ PNTX 1 1 3/ PNTX 1 1/4 1 11/ PNTX 1 1/ PNTX 2 2 5/ Parker Hannifin Corporation

53 Pipe Fittings and Port Pipe Fittings and Port 51 Parker Hannifin Corporation

54 Pipe Fittings and Port F5OHAO SAE-ORB / SAE-ORB F5OF SAE-ORB / NPTF FF NPTF / NPTF FF33M BSPT / BSPT Nipples Couplings Page 57 G5HG5 SAE-ORB / SAE-ORB GG NPTF / NPTF Page 57 GG44M BSPP / BSPP Page 57 Page 57 Reducers, Expanders, Conversions F5OG5 SAE-ORB / SAE-ORB F5OG SAE-ORB / NPTF Page 57 FHG5 NPTF / SAE-ORB FG NPTF / NPTF Page 58 Page 57 PTR Pipe Thread Reducer F8OHG5 BSPT/ NPTF F8OHG BSPT/ NPTF Page 58 F4OHG5 BSPT/ NPTF Page 58 F4OHG BSPT/ NPTF Page 58 F3HG BSPT/ NPTF Page 59 Page 59 CD45 NPTF / NPTF Page 59 DD45 NPTF / NPTF Page Elbows Page 60 Page 60 AOEG5 SAE-ORB / SAE-ORB Page 61 AOEG SAE-ORB / NPTF CR NPTF / NPTF CD NPTF / NPTF Page 61 DD NPTF / NPTF Page Elbows Page 61 G5G5JAO SAE-ORB Branch Tee Page 61 AOG5JG5 SAE-ORB Run Tee G5G5JG5 SAE-ORB Tee Page 62 RRS NPTF Tee Page 62 Page 62 MMS NPTF Branch Tee Tees MRO NPTF Run Tee MMO NPTF Tee Page 63 Page 63 KMMOO NPTF Cross Page 63 Page 64 Page 64 P5ON SAE-ORB Hex Head Cross Plugs, Bleed Page 64 HP5ON SAE-ORB Hollow Hex Page 64 HP NPTF Hex Head SHP NPTF Square Head Page 65 HHP NPTF Hollow Hex Head Page 65 Page 65 Page 65 Page 66 Page Parker Hannifin Corporation

55 Introduction This Section contains adapters with thread types including: NPT, NPTF, BSPT, BSPP, SAE UN/UNF, and Metric. All the threads in this section are made to industry specifications with conformance shown in Table 1. Design and Construction Shaped products (elbows, tees and crosses) are hot forged and machined, while straights are manufactured from cold drawn barstock. Where applicable, these products are made in conformance with the design criteria of the Society of Automotive Engineers Standards, SAE J514, J530. Parker Fluid Connector products made from steel and brass, for the most part, have NPTF threads. Stainless steel products may have NPT or slightly modified NPT threads to minimize the chance of galling on assembly. Standard Material Specifications: The standard materials used in the manufacture of Industrial Pipe and Adapter fittings are shown in Table 2. Note: Upon request, pipe fittings, adapters and plugs could be furnished in materials other than those shown in the material specifications chart. Finish Zinc clear chromate (chromium 6 free). Pipe Fittings and Port Thread Standard NPT ANSI B1.20.1, FED-STD-H28/7 NPTF SAE J476, ANSI B1.20.3, FED-STD-H28/8 BSPT BS 21, ISO 7/1 BSPP BS 2779, ISO 228/1 Metric ISO 261, ANSI B1.13M, FED-STD-H28/21 UN/UNF* ANSI B1.1, FED-STD-H28/2 *Class 2A or 2B Table 1 Thread Conformance Standards Pipe Fittings, and Plugs Steel Stainless Steel Brass ASTM Type ASTM Type ASTM Type Forged Bodies A /1215 A B124 CA377 Bar Stock Bodies A108 12L14 A Cold Formed Bodies A576 C1010 / C1008 B16 B453 Table 2 Standard Material Specifications for Industrial Pipe Fittings and CA360 CA345 How Port Connections Work Tapered ( Pipe ) Threads There are three types of tapered threads commonly used in industrial applications. NPT/NPTF BSPT Metric Taper All three thread styles noted above use the same basic metal-tometal sealing design for achieving a seal. Although very similar, there are differences in the thread dimensions, pitch, and flank angle that do not allow interchangeability. NPT / NPTF Threads NPT threads, when assembled without a sealant, leave a spiral leak path at the crest-root junction as shown in Fig. 1. To seal pressurized fluid, NPT threads require a suitable sealant. NPTF threads (Dryseal), on the other hand, when assembled, do not leave the spiral leak path. This is because they have controlled truncation at the crest and root, ensuring metal-to-metal crest-root contact prior to, or just as the male-female thread flanks make contact as seen in Fig. 2. Upon further tightening, the thread crests are flattened out until the flanks also make metal-to-metal contact as seen in Fig. 3. Thus, theoretically at least, there is no passage left for the fluid to leak, provided all surfaces are flawless and dimensions exact. In reality, this is not the case and a sealant/lubricant is necessary to achieve a leak free joint, even with NPTF threads. The sealant/lubricant fills all imperfections in the surfaces affecting the seal and also provides lubrication to ease assembly and minimize galling. Spiral leak path Fig. 1 NPT: Wrench Tight, No Crest-Root Contact, Flank Contact Only Fig. 2 NPTF: Hand Tight, Crest to Root Contact Fig. 3 NPTF: Wrench Tight, Crest to Root and Flank Contact Thread crest and root in contact. Gap remains at flank angles. Full thread form contact Dimensions and pressures for reference only, subject to change. 53 Parker Hannifin Corporation

56 Application Guidelines for Tapered Threads Straight Connectors with NPT/NTPF 3/4-14 and Smaller Straight connectors with 3/4-14 NPT/NPTF and smaller male pipe threads have very high pressure holding capability and seal reliability when used in applications without make and break (such as maintenance) requirements. They are also well suited for low cycle non-pulsating (static) applications with pressures in excess of 6,000 psi. Straight Connectors with NPT/NPTF above 3/4-14 and All Shaped Connectors with NPT/NPTF Threads It is difficult to always tighten shapes with pipe threads to an optimum tightness level because of orientation requirements. Also, all connectors in this category with pipe threads have low reliability for leak free operation in dynamic applications. Therefore, they are not preferred where a leak free joint is required. All NPTF Connectors While a pipe thread connection can be disassembled and reassembled in low-pressure systems, it is not intended to be a frequently assembled and disassembled connection. (When connectors are known to be disassembled and re-assembled repeatedly, pipe connections are not preferred for high-pressure systems.) For the above applications, a port connection with an elastomeric seal, such as SAE straight thread port (SAE J1926/ISO11926), SAE four bolt split flange (SAE J518/ISO 6162), and ISO 6149 is recommended. For applications where elastomeric seals can t be used, consult the manufacturer. As noted, BSPT and metric taper are designed and perform similarly. Follow the NPT/NPTF guidelines for their application. In general, tapered thread connections have the following limitations which should be considered when specifying port connections: Poor dynamic sealing characteristics Possible expansion, and even cracking, of the port Orientation is a concern in shaped connectors Larger threads are more prone to leakage because of more potential leak points System contamination due to thread sealant Prone to galling, especially in stainless steel Limited remakeability Parallel Thread Pipe Fittings and Port Straight, or parallel, thread ports in various forms are becoming more popular in hydraulic systems because they are more reliable and easier to service. Three types of threads are used for parallel thread ports: UN/UNF (SAE straight thread) BSPP (British Standard Pipe, Parallel) Metric parallel Because parallel threads only serve one function (i.e. holding the fitting in place), some other means of sealing is always present, such as an elastomeric O-ring or a metal seal. There are many variations of sealing methods, and in some cases, they are interchangeable among the different thread forms and may appear to be similar. UN / UNF Threads SAE J1926 uses UN/UNF threads and is often referred to as SAE Straight Thread. The female port is often referred to as ORB or O-ring boss. This port style, shown in Fig. 4, is widely used in North America. BSPP Fig. 4 Typical O-Ring Boss Port In Europe, Japan and many other former Commonwealth nations, the British Standard Pipe thread form, BSP, is still used extensively to connect pipes and components in hydraulic systems. The BSP thread is offered in a straight (parallel) form known as BSPP and a tapered form known as BSPT. These threads feature a 55 flank angle. Fittings in this section with male BSPP threads use a primary sealing method of an O-ring and retaining ring, as shown in Fig. 5. Fig. 5 O-Ring with Retaining Ring Dimensions and pressures for reference only, subject to change. 54 Parker Hannifin Corporation

57 Additional sealing methods such as a cutting face or an EOlastic seal, as shown in Fig. G6, are also available on other fittings within the catalog. These BSPP fittings are all designed to thread into a female BSPP port (ISO 1179), however, the seal is created with one of the aforementioned sealing methods, not with the threads. It is also important to note that with these BSPP threaded connections, the seal occurs on the port surface, or spotface, not in an O-ring gland or chamfer as SAE and ISO straight thread do. Metric Parallel In Europe, primarily in Germany, the traditional metric parallel thread form is used extensively to connect components in hydraulic systems. This metric thread is designed to thread into and seal in a female Metric parallel port conforming to ISO (DIN-3852, Part 1). Fittings in this section with male metric threads use a primary sealing method of an O-ring and retaining ring (similar to Fig. 5). Additional sealing methods such as a cutting face or an EOlastic seal (similar to Fig. 6) are Pipe Fittings and Port also available on other fittings within the catalog. Sealing is accommodated with one of the aforementioned sealing methods, not with the threads. It is also important to note that with these male metric threads, the seal occurs on the top face (spotface) of the port, not in an O-ring gland or chamfer as in SAE and ISO-6149 straight threads. To minimize further proliferation of additional port thread styles, the International Standards Organization Technical Committee 131 completed the development of a world standard leak-free port connection. It is recommended that this port, ISO , be specified in all new hydraulic fluid power applications. Parker and other fluid connector manufacturers have expanded product offering to incorporate the ISO 6149 male studs as a standard on many tube fitting products. Parker offers the ISO 6149 male stud end, shown in Fig. 7, on several tube fitting products including: Seal-Lok, Triple-Lok, EO, EO-2, Conversion, Plugs, etc. This port, utilizes metric parallel threads for mechanical holding power and a sealing method similar to the proven SAE Straight Thread O-ring port. Indentification Groove Fig. 6 O-Ring in Fitting Groove Fig. 7 ISO 6149 Male Dimensions and pressures for reference only, subject to change. 55 Parker Hannifin Corporation

58 Pipe Fittings and Port Feature Advantage Benefit Tapered Thread Fittings Compact size Suitable selection for plumbing in limited or tight space in a compact system. Compact systems are more efficient and reduce the need for excessive routing of costly hose or tube Widespread acceptability Available worldwide for OEM and MRO applications Eases efforts to find component parts and replacement fittings, reducing unnecessary downtime High static pressure rating Allows for use in high pressure applications Increases versatility of fitting Offered in three standard materials (Steel, Stainless Steel, and Brass) Adaptable to ORFS, Flareless Bite-type, Metric Bite-type, 37 flare, etc. High temperature applications Reliable sealing in dynamics applications Unlimited reusability/ remakeability No thread sealant needed Infinite positioning of shaped adapters Elastomeric seal Allows customer to match media and temperature applications without special fittings and seals. Versatility for end customer and for customer standardization efforts Is not limited by temperature range of elastomeric seal Straight Thread Fittings Ideal in systems with high pressure and cycling Extends the service life of the fitting Eliminates the potential for contaminating and damaging sensitive hydraulic components due to thread sealant Eliminates potential of damaging adapter and/or component by incorrectly assembling to accomplish correct orientation Tolerant of minor surface imperfections to provide leak-free connection Reduces component procurement costs and increases fitting availability Standardization reduces procurement costs Increases versatility of fitting Provides reliable, long-term sealing Reduces maintenance costs and component replacement costs Reduces maintenance costs and component replacement costs Improves assembly time and reduces maintenance costs Reduces operational and maintenance costs 56 Parker Hannifin Corporation

59 Pipe Fittings and Port F5OHAO Straight Thread Union SAE-ORB / SAE-ORB C4 1 2 HEX L1 UN/UNF-2A UN/UNF-2A -S 4 F5OHAO 7/ / / F5OHAO 9/ / / F5OHAO 3/4-16 3/4-16 7/ F5OHAO 7/8-14 7/ F5OHAO 1 1/ / / F5OHAO 1 5/ / / F5OHAO 1 5/ / / F5OHAO 1 7/ / / F5OHAO 2 1/ / / F5OF Male Pipe Adapter SAE-ORB / NPTF C1 1 2 HEX L UN/UNF-2A NPTF -S 4-1/8 F5OF 7/ /8-27 9/ /4 F5OF 9/ / / /8 F5OF 9/ / / /4 F5OF 3/4-16 1/4-18 7/ /8 F5OF 3/4-16 3/8-18 7/ /2 F5OF 3/4-16 1/2-14 7/ /2 F5OF 7/8-14 1/ /2 F5OF 1 1/ / / /4 F5OF 1 1/ / / /4 F5OF 1 5/ / / F5OF 1 5/ /2 1 1/ /4 F5OF 1 5/ /4-11 1/2 1 7/ /2 F5OF 1 7/ /2-11 1/2 2 1/ Note: All F5OF fittings have a 30 chamfer for sealing with NPSM swivel type fittings. FF33M BSPT Pipe Nipple BSPP / BSPP MALE BSPT C6 HEX D L PT1 PT2 (mm) (mm) (mm) -S 1/8FF33M 1/8-28 1/ /4FF33M 1/4-19 1/ /4 x 1/8FF33M 1/4-19 1/ /8FF33M 3/8-19 3/ /8 x 1/4FF33M 3/8-19 1/ /2FF33M 1/2-14 1/ /2 x 3/8FF33M 1/2-14 3/ /4FF33M 3/4-14 3/ /4 x 1/2FF33M 3/4-14 1/ FF33M x 3/4FF33M / FF Pipe Nipple NPTF / NPTF 1 C HEX NPTF NPTF -S 1/8 FF 1/8-27 1/8-27 7/ /4 FF 1/4-18 1/4-18 5/ /4 x 1/8 FF 1/4-18 1/8-27 5/ /8 FF 3/8-18 3/8-18 3/ /8 x 1/8 FF 3/8-18 1/8-27 3/ /8 x 1/4 FF 3/8-18 1/4-18 3/ /2 FF 1/2-14 1/2-14 7/ /2 x 1/4 FF 1/2-14 1/4-18 7/ /2 x 3/8 FF 1/2-14 3/8-18 7/ /4 FF 3/4-14 3/ / /4 x 1/4 FF 3/4-14 1/ / /4 x 1/2 FF 3/4-14 1/ / FF / /2 1 3/ x 3/4 FF /2 3/ / /4 FF 1 1/4-11 1/2 1 1/4-11 1/2 1 3/ /4 x 1 FF 1 1/4-11 1/ /2 1 3/ /2 FF 1 1/2-11 1/2 1 1/2-11 1/ /2 x 1 FF 1 1/2-11 1/ / FF / /2 2 1/ Note: All FF fittings have a 30 chamfer for sealing with NPSM swivel type fittings. G5HG5 Straight Thread Coupling Female SAE / Female SAE 2 L C 1 2 HEX L UN/UNF-2B UN/UNF-2B -S 4 G5HG5 7/ / / G5HG5 9/ / / G5HG5 3/4-16 3/ G5HG5 7/8-14 7/ / G5HG5 1 1/ / / G5HG5 1 5/ / / GG44M BSPP Female Union BSPP / BSPP FEMALE BSPP C6 HEX L PT1 PT2 (mm) (mm) -S 1/8GG44M 1/8-28 1/ /4GG44M 1/4-19 1/ /4 x 1/8GG44M 1/4-19 1/ /8GG44M 3/8-19 3/ /8 x 1/4GG44M 3/8-19 1/ /2GG44M 1/2-14 1/ /2 x 3/8GG44M 1/2-14 3/ GG44M Parker Hannifin Corporation

60 F5OG5 Straight Thread Reducer / Expander SAE-ORB / SAE-ORB F5OG Female Pipe Adapter SAE-ORB / NPTF Pipe Fittings and Port SAE C 1 2 HEX L UN/UNF-2A UN/UNF-2B -S 2-4 F5OG5 5/ / / F5OG5 7/ / / F5OG5 9/ / / F5OG5 9/ / / F5OG5 9/ / / F5OG5 3/4-16 7/ / F5OG5 3/4-16 9/ / F5OG5 3/4-16 7/ / F5OG5 7/8-14 9/ F5OG5 7/8-14 3/ F5OG5 7/ / / F5OG5 1 1/ / / F5OG5 1 1/ / / F5OG5 1 1/ / / F5OG5 1 1/ / / F5OG5 1 1/ / / F5OG5 1 5/ / / F5OG5 1 5/ / / F5OG5 1 5/ / / F5OG5 1 5/ / / F5OG5 1 5/ / / F5OG5 1 5/8-12 3/ / F5OG5 1 5/8-12 7/ / F5OG5 1 5/ / / F5OG5 1 5/ / / F5OG5 1 5/ / / F5OG5 1 7/8-12 9/ / F5OG5 1 7/ / / F5OG5 1 7/ / / F5OG5 1 7/ / / F5OG5 2 1/ / / F5OG5 2 1/ / / C 1 2 HEX L UN/UNF-2A NPTF -S 4-1/8 F5OG 7/ /8-27 9/ /4 F5OG 7/ /4-18 3/ /8 F5OG 1/2-20 1/8-27 5/ /4 F5OG 1/2-20 1/4-18 3/ /8 F5OG 9/ / / /4 F5OG 9/ /4-18 3/ /8 F5OG 9/ /8-18 7/ /2 F5OG 9/ / / /4 F5OG 3/4-16 1/4-18 7/ /8 F5OG 3/4-16 3/8-18 7/ /2 F5OG 3/4-16 1/ / /4 F5OG 7/8-14 1/ /8 F5OG 7/8-14 3/ /2 F5OG 7/8-14 1/ / /4 F5OG 7/8-14 3/ / /8 F5OG 1 1/ / / /2 F5OG 1 1/ / / /4 F5OG 1 1/ / / /2 F5OG 1 3/ / / /4 F5OG 1 3/ / / /2 F5OG 1 5/ / / /4 F5OG 1 5/ / / F5OG 1 5/ /2 1 5/ F5OG 1 5/ /2 1 7/ /4 F5OG 1 5/ /4-11 1/ F5OG 1 7/ /2 2 1/ /4 F5OG 1 7/ /4-11 1/2 2 1/ /2 F5OG 1 7/ /2-11 1/2 2 1/ F5OG 2 1/ /2 2 7/ GG Pipe Coupling NPTF / NPTF FHG5 Female Straight Thread Adapter NPTF / SAE-ORB SAE C 1 2 HEX L W W1 NPTF NPTF -S 1/8 GG 1/8-27 1/8-27 5/ /4 GG 1/4-18 1/4-18 3/ /4 x 1/8 GG 1/4-18 1/8-27 3/ /8 GG 3/8-18 3/8-18 7/ /8 x 1/8 GG 3/8-18 1/8-27 7/ /8 x 1/4 GG 3/8-18 1/4-18 7/ /2 GG 1/2-14 1/ / /2 x 1/4 GG 1/2-14 1/ / /2 x 3/8 GG 1/2-14 3/ / /4 GG 3/4-14 3/ / /4 x 1/2 GG 3/4-14 1/ / GG / /2 1 5/ /4 GG 1 1/4-11 1/2 1 1/4-11 1/ /2 GG 1 1/2-11 1/2 1 1/2-11 1/2 2 3/ C 1 2 HEX L NPTF UN/UNF-2A -S 1/8-5 FHG5 1/8-27 1/2-20 3/ /4-6 FHG5 1/4-18 9/ / /8-6 FHG5 3/8-18 9/ / /8-8 FHG5 3/8-18 3/ /2-6 FHG5 1/2-14 9/ / /2-8 FHG5 1/2-14 3/ /2-10 FHG5 1/2-14 7/ / /4-12 FHG5 3/ / / FHG /2 1 5/ / Parker Hannifin Corporation

61 FG Expander / Adapter NPTF / NPTF SAE C1 1 2 HEX L1 NPTF NPTF -S 1/8 x 1/16 FG 1/ /8-27 5/ /8 FG 1/8-27 1/8-27 5/ /4 x 1/8 FG 1/8-27 1/4-18 3/ /4 FG 1/4-18 1/4-18 3/ /8 x 1/8 FG 1/8-27 3/8-18 7/ /8 x 1/4 FG 1/4-18 3/8-18 7/ /8 FG 3/8-18 3/8-18 7/ /2 x 1/8 FG 1/8-27 1/ / /2 x 1/4 FG 1/4-18 1/ / /2 x 3/8 FG 3/8-18 1/ / /2 FG 1/2-14 1/ / /4 FG 3/4-14 3/ / /4 x 1/4 FG 1/4-18 3/ / /4 x 1/2 FG 1/2-14 3/ / FG / /2 1 5/ x 1/4 FG 1/ /2 1 5/ x 1/2 FG 1/ /2 1 5/ x 3/4 FG 3/ /2 1 5/ /4 FG 1 1/4-11 1/2 1 1/4-11 1/ /4 x 1 FG /2 1 1/4-11 1/ /2 x 1 FG /2 1 1/2-11 1/2 2 3/ /2 x 1 1/4 FG 1 1/4-11 1/2 1 1/2-11 1/2 2 3/ FG / /2 2 7/ PTR Pipe Thread Reducer NPTF / NPTF SAE Pipe Fittings and Port C2 1 2 HEX L2 NPTF NPTF -S 1/4 x 1/8 PTR 1/4-18 1/8-27 5/ /8 x 1/8 PTR 3/8-18 1/8-27 3/ /8 x 1/4 PTR 3/8-18 1/4-18 3/ /2 x 1/8 PTR 1/2-14 1/8-27 7/ /2 x 1/4 PTR 1/2-14 1/4-18 7/ /2 x 3/8 PTR 1/2-14 3/8-18 7/ /4 x 1/4 PTR 3/4-14 1/ / /4 x 3/8 PTR 3/4-14 3/ / /4 x 1/2 PTR 3/4-14 1/ / x 1/4 PTR /2 1/ / x 3/8 PTR /2 3/ / x 1/2 PTR /2 1/ / x 3/4 PTR /2 3/ / /4 x 1/4 PTR 1 1/4-11 1/2 1/ / /4 x 1/2 PTR 1 1/4-11 1/2 1/ / /4 x 3/4 PTR 1 1/4-11 1/2 3/ / /4 x 1 PTR 1 1/4-11 1/ /2 1 3/ /2 x 3/4 PTR 1 1/2-11 1/2 3/ /2 x 1 PTR 1 1/2-11 1/ / /2 x 1 1/4 PTR 1 1/2-11 1/2 1 1/4-11 1/ x 1 PTR / /2 2 1/ x 1 1/4 PTR /2 1 1/4-11 1/2 2 1/ x 1 1/2 PTR /2 1 1/2-11 1/2 2 1/ F8OHG5 Conversion Adapter Metric-ORR / SAE-ORB (for ISO 9974 / DIN Port) PORT THREAD 1 METRIC STRAIGHT THREAD 2 UN/UNF-2B C1 HEX L1 -S M10-4F8OHG5 M10x1 7/ / M10-6F8OHG5 M10X1 9/ / M14-6F8OHG5 M14x1.5 9/ / M16-8F8OHG5 M16x1.5 3/ M18-8F8OHG5 M18X1.5 3/ M22-10F8OHG5 M22x1.5 7/ M27-12F8OHG5 M27x2 1 1/ M33-16F8OHG5 M33x2 1 5/ M42-20F8OHG5 M42x2 1 5/ Parker Hannifin Corporation

62 Pipe Fittings and Port F8OHG Conversion Adapter Metric-ORR / NPTF (for ISO 9974 / DIN Port) PORT THREAD 1 METRIC STRAIGHT THREAD 2 NPTF C1 HEX L -S M10-1/8F8OHG M10X1.0 1/8-27 9/ M12-1/4F8OHG M12X1.5 1/4-18 3/ M14-1/4F8OHG M14X1.5 1/4-18 3/ M16-3/8F8OHG M16X1.5 3/8-18 7/ M16-1/2F8OHG M16X1.5 1/ / M18-3/8F8OHG M18X1.5 3/ / M18-1/2F8OHG M18X1.5 1/ / M22-1/2F8OHG M22X1.5 1/ / M27-3/4F8OHG M27X2.0 3/ / M33-1F8OHG M33X /2 1 5/ F4OHG5 Conversion Adapter BSPP-ORR / SAE-ORB (for ISO / DIN Port) PORT THREAD C1 1 BSPP 2 UN/UNF-2B HEX L1 -S 1/8-4F4OHG5 1/8-28 7/ / /4-4F4OHG5 1/4-19 7/ / /4-6F4OHG5 1/4-19 9/ / /8-4F4OHG5 3/8-19 7/ / /8-5F4OHG5 3/8-19 1/2-20 7/ /8-6F4OHG5 3/8-19 9/ / /8-8F4OHG5 3/8-19 3/ /2-10F4OHG5 1/2-14 7/ / /4-12F4OHG5 3/ / / F4OHG / / /4-16F4OHG5 1 1/ / /4-20F4OHG5 1 1/ / F4OHG Conversion Adapter BSPP-ORR / NPTF (for ISO / DIN Port) C6 1 MALE BSPP 2 FEMALE NPTF HEX L -S 1/8 x 1/8F4OHG 1/8-28 1/8-27 5/ /4 x 1/4F4OHG 1/4-19 1/4-18 3/ /8 x 3/8F4OHG 3/8-19 3/8-18 7/ /2 x 1/2F4OHG 1/2-14 1/ / /4 x 3/4F4OHG 3/4-14 3/ / x 1F4OHG /2 1 5/ Parker Hannifin Corporation

63 F3HG Conversion Adapter NPTF / BSPT C6 1 2 HEX L BSPT NPTF -S 1/8 x 1/8F3HG 1/8-28 1/8-27 9/ /4 x 1/4F3HG 1/4-19 1/4-18 3/ /8 x 3/8F3HG 3/8-19 3/8-18 7/ /2 x 1/2F3HG 1/2-14 1/ / /4 x 3/4F3HG 3/4-14 3/ / x 1F3HG /2 1 5/ CD45 45 Street Elbow NPTF / NPTF SAE AOEG5 Straight Thread Elbow SAE-ORB / SAE-ORB AOEG Female Pipe Elbow NPT / SAE-ORB Pipe Fittings and Port * Y Across Wrench Flats 1 2 M N1 Y UN/UNF-2A UN/UNF-2B -S 4 AOEG5 7/ / / AOEG5 9/ / / AOEG5 3/4-16 3/ / AOEG5 7/8-14 7/ / AOEG5 1 1/ / / AOEG5 1 5/ / / N3 N4 Y NPTF NPTF -S 1/8 CD45 1/8-27 1/ / /4 CD45 1/4-18 1/ / /8 CD45 3/8-18 3/ / /2 CD45 1/2-14 1/ / /4 CD45 3/4-14 3/ / CD / / / /4 CD45 1 1/4-11 1/2 1 1/4-11 1/ / M N Y UN/UNF-2A NPTF -S 6-1/4 AOEG 9/ / / /8 AOEG 3/4-16 3/ / /2 AOEG 7/8-14 1/ / /4 AOEG 1 1/ / / AOEG 1 5/ / /8 1.8 DD45 45 Female Pipe Elbow NPTF / NPTF SAE N2 Y NPTF NPTF -S 1/4 DD45 1/4-18 1/ / /8 DD45 3/8-18 3/ / /2 DD45 1/2-14 1/ / /4 DD45 3/4-14 3/ / DD / / / Parker Hannifin Corporation

64 Pipe Fittings and Port CR Male Pipe Elbow NPTF / NPTF SAE * * Not shown in SAE J514, but coded per SAE J846. * Y Across Wrench Flats 1 2 N N1 Y NPTF NPTF -S 1/8 CR 1/8-27 1/ / /4 CR 1/4-18 1/ / /8 CR 3/8-18 3/ / /8 x 1/4 CR 3/8-18 1/ / /2 CR 1/2-14 1/ / /2 x 3/8 CR 1/2-14 3/ / /4 CR 3/4-14 3/ / /4 x 1/2 CR 3/4-14 1/ / CR / / /8 1 1/4 CR 1 1/4-11 1/2 1 1/4-11 1/ / /2 CR 1 1/2-11 1/2 1 1/2-11 1/ /8 2.5 CD Street Elbow NPTF / NPTF SAE DD Female Pipe Elbow NPTF / NPTF SAE N N1 Y NPTF NPTF -S 1/8 CD 1/8-27 1/ / /8 x 1/4 CD 1/8-27 1/ / /4 CD 1/4-18 1/ / /4 x 1/8 CD 1/4-18 1/ / /4 x 3/8 CD 1/4-18 3/ / /8 CD 3/8-18 3/ / /8 x 1/4 CD 3/8-18 1/ / /8 x 1/2 CD 3/8-18 1/ / /2 CD 1/2-14 1/ / /2 x 3/8 CD 1/2-14 3/ / /2 x 3/4 CD 1/2-14 3/ / /4 CD 3/4-14 3/ / /4 x 1/2 CD 3/4-14 1/ / CD / / / /4 CD 1 1/4-11 1/2 1 1/4-11 1/ / /2 CD 1 1/2-11 1/2 1 1/2-11 1/ / N1 Y NPTF NPTF -S 1/8 DD 1/8-27 1/ / /4 DD 1/4-18 1/ / /8 DD 3/8-18 3/ / /2 DD 1/2-14 1/ / /4 DD 3/4-14 3/ / DD / / / /4 DD 1 1/4-11 1/2 1 1/4-11 1/ / /2 DD 1 1/2-11 1/2 1 1/2-11 1/ / Parker Hannifin Corporation

65 Pipe Fittings and Port G5G5JAO Straight Thread Branch Tee SAE-ORB (all three ends) * Y Across Wrench Flats M N1 Y UN/UNF-2B UN/UNF-2B UN/UNF-2A -S 4 G5G5JAO 7/ / / / G5G5JAO 3/4-16 3/4-16 3/ / G5G5JAO 7/8-14 7/8-14 7/ / AOG5JG5 Straight Thread Run Tee SAE-ORB (all three ends) * Y Across Wrench Flats M N2 Y UN/UNF-2A UN/UNF-2B UN/UNF-2B -S 4 AOG5JG5 7/ / / / AOG5JG5 9/ / / / AOG5JG5 3/4-16 3/4-16 3/ / AOG5JG5 7/8-14 7/8-14 7/ / AOG5JG5 1 1/ / / / AOG5JG5 1 5/ / / /8 3.0 G5G5JG5 Female Straight Thread Tee SAE-ORB (all three ends) * Y Across Wrench Flats 1-3 N2 Y UN/UNF-2B -S 8 G5G5JG5 3/ / Parker Hannifin Corporation

66 MMS Male Branch Tee NPTF (all three ends) SAE MRO Male Run Tee NPTF (all three ends) SAE Pipe Fittings and Port END SIZE 1-3 NPTF N N1 Y -S 1/8 MMS 1/ / /4 MMS 1/ / /8 MMS 3/ / /2 MMS 1/ / /4 MMS 3/ / MMS / / N N1 Y NPTF -S 1/8 MRO 1/ / /4 MRO 1/ / /8 MRO 3/ / /2 MRO 1/ / /4 MRO 3/ / MRO / / /4 MRO 1 1/4-11 1/ / /2 MRO 1 1/2-11 1/ /2 1.5 RRS Male Pipe Tee NPTF (all three ends) SAE MMO Female Pipe Tee NPTF (all three ends) SAE N Y NPTF -S 1/8 RRS 1/ / /4 RRS 1/ / /8 RRS 3/ / /2 RRS 1/ / /4 RRS 3/ / N1 Y NPTF -S 1/8 MMO 1/ / /4 MMO 1/ / /8 MMO 3/ / /2 MMO 1/ / /4 MMO 3/ / MMO / / /4 MMO 1 1/4-11 1/ / /2 MMO 1 1/2-11 1/ / Parker Hannifin Corporation

67 Pipe Fittings and Port KMMOO Female Pipe Cross NPTF (all four ends) SAE HP5ON Hollow Hex Plug SAE-ORB SAE B END SIZE 1-4 NPTF N1 Y -S 1/8 KMMOO 1/ / /4 KMMOO 1/ / /8 KMMOO 3/ / /2 KMMOO 1/ / /4 KMMOO 3/ / KMMOO / /8 1.8 END SIZE 1 UN/UNF-2A C5 HEX I1 L1 X DIA -S 2 HP5ON 5/ / HP5ON 3/8-24 1/ HP5ON 7/ / HP5ON 1/2-20 3/ HP5ON 9/ / HP5ON 3/4-16 5/ HP5ON 7/8-14 3/ HP5ON 1 1/ / HP5ON 1 3/ / HP5ON 1 5/ / HP5ON 1 5/8-12 3/ HP5ON 1 7/8-12 3/ P5ON Hex Head Plug SAE-ORB SAE A END SIZE 1 UN/UNF-2A C4 HEX I1 L -S 2 P5ON 5/ / P5ON 3/8-24 1/ P5ON 7/ / P5ON 1/2-20 5/ P5ON 9/ / P5ON 3/4-16 7/ P5ON 7/ P5ON 1 1/ / P5ON 1 3/ / P5ON 1 5/ / P5ON 1 5/ / P5ON 1 7/ / P5ON 2 1/ / HP Hex Head Pipe Plug NPTF SAE E C 1 HEX L NPTF -S 1/8 HP 1/8-27 7/ /4 HP 1/4-18 9/ /8 HP 3/ / /2 HP 1/2-14 7/ /4 HP 3/ / HP* /2 1 5/ /4 HP 1 1/4-11 1/2 1 3/ /2 HP 1 1/2-11 1/ HP /2 2 1/ * 1 HP-SS Hex is 1 3/8. 65 Parker Hannifin Corporation

68 HHP Hollow Hex Pipe Plug NPTF SHP Square Head Plug NPTF Pipe Fittings and Port SAE N C5 INTERNAL 1 B HEX NPTF -S 1/16 HHP 1/ / /8 HHP 1/ / /4 HHP 1/ / /8 HHP 3/ / /2 HHP 1/ / /4 HHP 3/ / HHP / / /4 HHP 1 1/4-11 1/ / /2 HHP 1 1/2-11 1/ / HHP / /4 2.0 C 1 SQUARE L NPTF -S 1/8 SHP 1/8-27 9/ /4 SHP 1/4-18 3/ /8 SHP 3/8-18 7/ /2 SHP 1/2-14 9/ /4 SHP 3/4-14 5/ SHP /2 13/ Parker Hannifin Corporation

69 Pipe Swivels Pipe Swivels 67 Parker Hannifin Corporation

70 Pipe Swivels 0507 SAE-ORB / NPSM Swivel 0107 NPTF / NPSM Swivel 0207 NPTF / NPSM Swivel 0109 NPTF / PTT Straights Page 71 Page SAE-ORB / NPSM Swivel NPTF / NPSM Swivel Page NPTF / NPSM Swivel Page SAE-ORB / NPSM Swivel 45 Elbows 90 Elbows 2107 NPTF / NPSM Swivel Page NPTF / NPSM Swivel Long Drop Page NPTF / NPSM Swivel Page T NPSM Swivel / NPSM Swivel / NPSM Swivel Page T NPSM Swivel / NPSM Swivel / NPTF Tees Page T NPSM Swivel / NPSM Swivel / NPTF Page 73 Page 73 Page 73 Page 74 Page Parker Hannifin Corporation

71 Pipe Swivels Introduction Pipe swivel connections are one of the most traditional types of hydraulic connections. NPSM swivel adapters add versatility to male NPT hose and adapter connections. They are especially suited for manufacturers and end users that rely on this versatility. As a result, equipment manufacturers can simplify their hose assembly requirements by specifying NPSM adapters. See Fig. 1 for an illustration of this product flexibility. Parker offers a full line of NPSM pipe swivel adapters. Fourteen configurations are available as standard, many of which are available in steel and stainless steel. Parker s pipe swivels are designed for use with male NPT/NPTF hose fittings and adapters with a 30 machined seat. Design and Construction Pipe swivel adapters are manufactured in accordance to SAE J514 specifications, and thus are designed to work in conjunction with several manufacturers hose and adapter products. Unlike most pipe thread connections, NPSM swivel adapters do not seal on the threads. NPSM swivel connections incorporate parallel threads, as opposed to tapered. Sealing is accomplished between the nose of the swivel and the mating seat of the NPT pipe thread. This creates a metal-to-metal seal as shown in Fig. 2. Thus, a mating NPT male connector must have this 30 seat to ensure proper sealing. A full internal 30 seat with surface finish requirements of 125 Ra or better is required. See SAE J516 for specific requirements of the 30 seat. Construction: Shaped pipe swivels are manufactured from a hot forged construction. Straight adapters and crimp nuts are manufactured from cold drawn barstock. All Parker pipe swivels with male NPT ends include a 30 machined seat for NPSM swivel connections. Not all male NPT ends have the 30 seat. Parts that have this seat will include a note in the catalog. Threads: NPTF: ANSI B1.20.1, FED-STD-H28/7 NPT: SAEJ476, ANSI B1.20.3, FED-STD-H28/8 NPSM: ANSI B1.20.1, FED-STD-H28/7 *UN/UNF: ANSI B1.1, FED-STD-H28/2 (*Class 2A or 2B) Materials Specifications Pipe swivels are manufactured using state-of-the-art equipment and manufacturing technologies to assure construction integrity, long service life and the highest strength & quality. These materials are shown in Table 1. Upon request, pipe swivels can be furnished in materials, sizes and configurations other than Parker s standard offering. Adapter Port Connection NPSM / NPT Union Fig. 1 Illustration of the flexibility of the NPT Port and Hose Adapter system Fig. 2 Illustration showing how NPSM swivel adapters seal on mating chamfer in male pipe thread 07 Carbon Steel Stainless Steel ASTM Type ASTM Type Forged Bodies A /1215 A Bar Stock Bodies A108 12L14 A Crimp Swivel Nuts A108 12L14 A Table 1 Standard Materials Note: On request, 07 adapters can be furnished in materials other than those shown above. Finish: Zinc clear chromate (chromium 6 free). Dimensions and pressures for reference only, subject to change. 69 Parker Hannifin Corporation

72 Pipe Swivels Feature Advantage Benefit Metal-to-metal seal 30 seat on male pipe end of all Parker pipe swivels Available in steel and stainless steel Forged shapes Adaptable to SAE and NPT/ NPTF ports Allows for a wide range of operating temperatures and media Allows pipe swivel to be used as both a port adapter and NPSM swivel connection Allows customer to match media and temperature applications without special fittings and seals Higher resistance to mechanical shock and vibration that can lead to leakage Optimum balance of strength and machinability minimizes potential deformation while maintaining higher assembly torques and operating pressures Versatility for end customer and for customer standardization efforts Allows for increased versatility of pipe swivels Improves versatility for flexible system requirements Standardization reduces procurement costs Reduces operational and maintenance costs Standardization reduces procurement costs Pipe Swivel (NPSM) Ends Male Pipe End NPSM Pipe Swivel NPT/NPTF Thread NPSM Thread Hex - Swivel Drill - Male Drill - Swivel Chamfer Dia. Thread Length PT T C D D2 X L Size NPT/NPTF NPSM 2 1/8-27 1/8-27 9/ /4-18 1/ / /8-18 3/8-18 7/ /2-14 1/ /4-14 3/ / / /2 1 1/ /4-11 1/2 1 1/4-11 1/2 1 7/ /2-11 1/2 1 1/2-11 1/2 2 1/ / /2 2 5/ Dimensions and pressures for reference only, subject to change. 70 Parker Hannifin Corporation

73 Pipe Swivels 0507 Straight Thread Adapter SAE-ORB / NPSM Swivel SAE Male Pipe Adapter NPTF / NPSM Swivel SAE C2 HEX BODY 1 UN/UNF-2A 2 NPSM W4 -S / /8-27 9/ / /4-18 9/ /2-20 1/4-18 5/ / / / / / / / /2-14 3/ /4-16 1/4-18 7/ /4-16 3/8-18 7/ /4-16 1/2-14 7/ /4-16 3/ /8-14 3/ /8-14 1/ /8-14 3/ / / / / / / / / /2 1 1/ / / / / / / / /2 1 1/ / /2 1 7/ / /4-11 1/2 1 7/ C1 1 2 HEX W NPTF NPSM -S /8-27 1/8-27 9/ /8-27 1/4-18 5/ /4-18 1/ / /4-18 1/ / /4-18 3/ / /4-18 1/ / /8-18 1/ / /8-18 3/8-18 7/ /8-18 1/ / /2-14 1/ /2-14 3/8-18 7/ /2-14 1/ /2-14 3/ / /4-14 1/ / /4-14 3/ / / /2 1 1/ /2 3/ / / /2 1 1/ /2 1 1/4-11 1/2 1 3/ /4-11 1/ /2 1 7/ /4-11 1/2 1 1/4-11 1/2 1 7/ /4-11 1/2 1 1/2-11 1/2 2 1/ /2-11 1/2 1 1/2-11 1/2 2 1/ / /2 2 5/ Female Pipe Adapter NPTF / NPSM Swivel 0109 Parker Triple Thread Fitting NPTF / PTT SAE C1 1 2 HEX W1 NPTF NPSM -S /8-27 1/8-27 9/ /8-27 1/ / /4-18 1/8-27 9/ /4-18 1/ / /8-18 1/4-18 7/ /8-18 3/8-18 7/ /8-18 1/ /2-14 1/ /2-14 3/ /2-14 1/ /4-14 1/ / /4-14 3/ / /2 3/ / / /2 1 1/ /4-11 1/2 1 1/4-11 1/2 1 7/ /2-11 1/2 1 1/2-11 1/2 2 1/ / /2 2 5/ LL C1 AFTER 1 2 HEX L ASSY NPTF -S (1 5/16-14) 3/ / (1 5/16-14) /2 1 3/ /4 (1 5/8-14) 1 1/4-11 1/2 1 3/ /2 (1 7/8-14) 1 1/2-11 1/ Dimensions and pressures for reference only, subject to change. 71 Parker Hannifin Corporation

74 Pipe Swivels Straight Thread Elbow SAE-ORB / NPSM Swivel Female Pipe Elbow NPTF / NPSM Swivel SAE C1 1 2 HEX N4 W2 UN/UNF-2A NPSM -S / /4-18 7/ / /4-18 9/ / /8-18 9/ / /2-14 3/ /4-16 3/8-18 3/ /4-16 1/2-14 3/ /4-16 3/4-14 3/ /8-14 3/ / /8-14 1/2-14 7/ /8-14 3/ / / / / / / / / /2 1 5/ C1 1 2 HEX N W2 NPTF NPSM -S /4-18 1/4-18 3/ /8-18 3/8-18 7/ /2-14 1/ / /4-14 3/ / / /2 1 5/ Male Pipe Elbow NPTF / NPSM Swivel 2507 Straight Thread Elbow SAE-ORB / NPSM Swivel SAE SAE C1 1 2 HEX N W2 NPTF NPSM -S /8-27 1/8-27 7/ /4-18 1/4-18 9/ /8-18 3/8-18 3/ /8-18 1/ / /2-14 1/ / /2-14 3/8-18 7/ / /14 7/ /2-14 3/ / /4-14 1/ / /4-14 3/ / / /2 1 5/ /2 3/ / / /2 1 5/ /4-11 1/ /2 1 5/ /4-11 1/2 1 1/4-11 1/2 1 5/ /2-11 1/2 1 1/2-11 1/2 1 7/ / /2 2 1/ C1 1 2 HEX N5 W3 UN/UNF-2A NPSM -S / /4-18 7/ / /8-18 9/ / /4-18 9/ / /8-18 9/ / /2-14 3/ /4-16 1/4-18 3/ /4-16 3/8-18 3/ /4-16 1/2-14 3/ /4-16 3/4-14 3/ /8-14 3/8-18 7/ /8-14 1/2-14 7/ /8-14 3/4-14 7/ / / / / / / / /2 1 3/ / / / / /2 1 5/ / /4-11 1/2 1 5/ / /2-11 1/2 1 7/ Dimensions and pressures for reference only, subject to change. 72 Parker Hannifin Corporation

75 Pipe Swivels 2107 Male Pipe Elbow NPTF / NPSM Swivel 5607 Long Male Pipe Elbow NPTF / NPSM Swivel SAE C1 1 2 HEX N1 W3 NPTF NPSM -S /8-27 1/8-27 7/ /8-27 1/4-18 7/ /4-18 1/8-27 9/ /4-18 1/4-18 9/ /4-18 3/8-18 3/ /8-18 1/4-18 3/ /8-18 3/8-18 3/ /8-18 1/2-14 3/ /2-14 1/4-18 7/ /2-14 3/8-18 7/ /2-14 1/2-14 7/ /2-14 3/ / /4-14 3/ / /4-14 1/ / /4-14 3/ / / /2 1 3/ /2 3/ / / /2 1 5/ /2 1 1/4-11 1/2 1 7/ /4-11 1/ /2 1 5/ /4-11 1/2 1 1/4-11 1/2 1 5/ /2-11 1/2 1 1/2-11 1/2 1 7/ / /2 2 1/ Female Pipe Elbow NPTF / NPSM Swivel C1 1 2 HEX N1 W3 NPTF NPSM -S /8-27 1/8-27 9/ /4-18 1/4-18 3/ /8-18 3/8-18 7/ /2-14 1/ / /4-14 3/ / / /2 1 7/ T NPSM Union Tee NPSM Swivel (all three ends) C HEX W3 NPSM NPSM NPSM -S 077T-2 1/8-27 1/8-27 1/8-27 7/ T-4 1/4-18 1/4-18 1/4-18 9/ T-6 3/8-18 3/8-18 3/8-18 3/ T-8 1/2-14 1/2-14 1/2-14 3/ T-12 3/4-14 3/4-14 3/ / SAE C1 1 2 HEX N3 W3 NPTF NPSM -S /4-18 1/4-18 3/ /8-18 3/8-18 7/ /2-14 1/ / /4-14 3/ / / /2 1 5/ /4-11 1/2 1 1/4-11 1/2 1 7/ /2-11 1/2 1 1/2-11 1/2 2 1/ / /2 2 13/ Dimensions and pressures for reference only, subject to change. 73 Parker Hannifin Corporation

76 Pipe Swivels 217T Male Pipe Branch Tee NPTF / NPSM Swivel / NPSM Swivel C HEX N1 W3 NPTF NPSM NPSM -S 217T-4-4 1/4-18 1/4-18 1/4-18 9/ T-6-6 3/8-18 3/8-18 3/8-18 3/ T-8-6 1/2-14 3/8-18 1/2-14 3/ T-8-8 1/2-14 1/2-14 1/2-14 3/ T /4-14 3/4-14 3/ / T / / /2 1 1/ T Female Pipe Branch Tee NPTF / NPSM Swivel / NPSM Swivel C HEX N1 W3 NPTF NPSM NPSM -S 227T-4-4 1/4-18 1/4-18 1/4-18 3/ T-6-6 3/8-18 3/8-18 3/8-18 7/ T-8-8 1/2-14 1/2-14 1/ / T /4-14 3/4-14 3/ / Dimensions and pressures for reference only, subject to change. 74 Parker Hannifin Corporation

77 Hydraulic Flanges Hydraulic Flanges 75 Parker Hannifin Corporation

78 Hydraulic Flanges Flange Clamps FCS Flange Clamps Split Straight Flange / Flanges LOHQ Code 61, 62 / ORFS XHQ Code 61, 62 / 37 Flare Page 79 LOVQ Code 61, 62 / ORFS XVQ Code 61, 62 / 37 Flare Page 79 Page Flange Page 80 LOEQ Code 61, 62 / ORFS Page 80 XEQ Code 61, 62 / 37 Flare 90 Flange Page 80 Page Parker Hannifin Corporation

79 Introduction The 4-bolt flange connections conforming to SAE J518 and ISO and -2 are proven, leak-free connections, especially suited for larger sizes, higher pressures and assembly in tight quarters. Threaded port connections such as SAE straight thread O-ring and ISO 6149 are reasonably easy to assemble and provide 6000 psi and higher pressure capability up to size 12 (M27). Beyond this size the pressure rating starts to decrease and assembly torques increase rapidly. The 4-bolt flange port connections provide ability to connect larger sizes and achieve higher-pressure capability at reasonable assembly torques. Because of the lower assembly torques compared to an equivalent size threaded port, these connections are well suited for tight quarters where wrench clearances are limited. Parker 4-bolt flange products described in this part of the catalog provide various means of connecting tubes, hoses, pipes and threaded fittings to 4-bolt flange ports. The discussion below provides an overview of some of the available flange products. Design and Construction Parker 4-bolt flange products are designed to provide different methods of connecting a tube, hose, pipe or another fitting to the SAE standard 4-bolt flange port. Flange Fittings All Parker flange fittings, except for those with square mounting hole patterns (nomenclature code QS), are designed to conform to O-ring groove, bolt holes and bolt pattern dimensions of either Code 61 or Code 62 of SAE J518 and ISO (Code 61) or -2 (Code 62). The flange adapters (Code Q1 and Q2), and flange block fittings (Codes Q1B, Q2B and QSB) have O-ring grooves conforming to dimensions in SAE J518. The flange block fittings (Codes Q1B and Q2B) have through holes for the mounting bolts, again conforming to SAE J518. There is no industry standard for the bolt pattern of the square pattern block flanges with codes QSP and QSB. The flange pad fittings (Codes Q1P, Q2P, and QSP) have a flat face (no O-ring groove) and the mounting holes are tapped. Where these fittings are used, the seal is in the mating part (flange adapter, flange hose fitting, flange block fitting, etc.) as shown in Fig. 1. Fig. 2 Assembly / Removal SAE J518 Connection Hydraulic Flanges Flange Clamps Clamps are used for providing the holding power to the 4-bolt flange connection. They are offered in split and captive (one-piece) versions. The captive version is also offered with either drilled or tapped bolt holes. The captive flange clamp with tapped holes is used while connecting a tube to another tube or a hose. Parker flange clamps are forged for higher strength and durability. They meet all requirements of SAE J518. The split clamps make it easy to assemble the connection in close quarters. They also make removal of the flange head component, such as a hose assembly, easy by loosening all four bolts and removing one clamp half, as shown in Fig. 2. Parflange Sleeve Code 61/62 Clamp Seal Plate Junction Block Tees These are solid block union fittings to connect two tube/hose assemblies using 4-bolt flange connection, at a junction, to SAE 4-bolt flange port, or three tube/hose assemblies to each other. Connector Plate Connector plate is used as a middle plate to connect two flange heads with O-ring grooves, such as two hose assemblies with flange connection ends. The flat surface of the plate provides sealing surface on each side for the O-ring housed in the hose ends. Spacer Plate Spacer plate provides access to the system fluid via the gage port on the side. The plate is between the flange connection to provide this access. Plugs Plugs provide a means to block off the 4-bolt flange port with and without clamps, and to plug the end of a pipe (via welding). Tank Weld Adapter Tank weld adapters provide a means of flange connection to a fabricated reservoir or tank. Flange Pad Fitting Flanged Hose Fitting O-ring Seal in Hose Fitting Fig. 1 Flange Pad Fitting Dimensions other than the O-ring groove, bolt holes, bolt pattern, and the flange foot print (for codes Q1B and Q2B only) are not governed by any industry standard. However, Parker product design follows common industry practice and sound engineering. Dimensions and pressures for reference only, subject to change. Steel Stainless Steel Hydraulic Flanges ASTM Type ASTM Type 4-Bolt Flanges A108 C1020 A L A351 / Nitronic Flange Clamps A108 C1045 A HHCS Bolts SAE Grade 8 SHCS Bolts A Table 1 Standard Material Specifications for Hydraulic Flanges and Components Note: Split flange clamps are zinc clear (or Cr6 free) chromate. All other steel flanges are oil dipped. 77 Parker Hannifin Corporation

80 How Flange Connections Work The four-bolt flange connection (SAE J518) is a proven leak-free connection, especially suited for larger sizes. As a result, it has achieved worldwide acceptance. The connection s success is in its simplicity. It is a static face seal using a high durometer O-ring for the seal and clamps and bolts for holding power as shown in Fig. M3. Alternatively, a bonded seal plate is between the port face and the flat face of a mechanically formed (flanged with Parflange process) tube as shown in Fig. 4 to achieve the same results. The (O-ring) seal is compressed between the bottom of the groove in the flange head and the flat surface of the port or flange pad, providing a reliable soft seal. The alternate seal plate has a high durometer bonded rubber seal on the inside edge, which compresses between the two flat surfaces, providing a soft seal with the same reliability. A metal-to-metal contact at the outer face of the flange with the port face keeps the seal from extruding under pressure. This metal-to-metal contact is maintained by the clamping force provided by tightening the bolts via the clamps. This simple design provides several advantages over threaded port connections, such as NPTF, SAE, BSPP, ISO 6149, etc., in larger sizes: Ability to connect up to 5 inch O.D tube (Code 61 only) Much lower tightening torque required from the four bolts compared to that required for equivalent size threaded port Less tightening torque means smaller wrenches and wrench swing clearances providing ease of assembly in tight quarters Up to 6000 psi capability through 2" size (Code 62 only) Single seal point between tube/pipe/hose assembly and the port Ease of disassembly through use of split clamps The connection has one disadvantage it requires a larger area (foot print) on the component than an equivalent threaded port. Hydraulic Flanges Clamping Bolt Code 61/62 Clamp Tube or Hose End Flange Head O-Ring Fig. 3 Four-Bolt Flange Connection (SAE J518) Code 61/62 Clamp Tube Parflange Sleeve Seal Plate Fig. 4 Formed Tube with ISO 6162 (SAE J518) Connection Feature Advantage Benefit Conform to SAE J518 and Controls dimensions and tolerances of code 61 and ISO port connections Insures interchangeability and consistency Forged Construction Reliable, long life performance No downtime, reduced costs Compact envelope size, no sharp edges Reduced weight Over 60 Configurations Flexibility in plumbing, match system needs Best solution and best value Parflange Technology Designed to be used with Code 61/62 fittings Eliminates messy and time consuming brazing process Mounting Hardware Grade 8 bolts standard Performs in rigorous applications for the life of the flange Flange Kits Flange with hardware for mounting (o-ring, bolts and lockwashers) Reduces order and assembly error Dimensions and pressures for reference only, subject to change. 78 Parker Hannifin Corporation

81 Hydraulic Flanges FCS Code 61/62 Flange Clamps, Split HOSE PRODUCTS FLANGE HALF HOSE PRODUCTS KIT FLANGE HALF FLANGE SIZE B D E H K DRILL DIA. L M N Y MOUNTING HARDWARE HHCS S CODE 61 FLANGE CLAMPS, SPLIT 51H HK-8 8FCS /16-18 x H HK-12 12FCS /8-16 x H HK-16 16FCS /8-16 x H HK-20 20FCS /16-14 x H HK-24 24FCS /2-13 x H HK-32 32FCS /2-13 x H HK-40 40FCS /2-13 x H HK-48 48FCS /8-11 x H HK-56 56FCS /8-11 x H HK-64 64FCS /8-11 x CODE 62 FLANGE CLAMPS, SPLIT HFH-12 HFHFHK-12 12FCS /8-16 x HFH-16 HFHFHK-16 16FCS /16-14 x HFH-20 HFHFHK-20 20FCS /2-13 x HFH-24 HFHFHK-24 24FCS /8-11 x HFH-32 HFHFHK-32 32FCS /4-10 x To order a flange clamp split kit, insert a K after the material designator in the Tube Fitting part number. The Kit includes two flange clamp halves, 4 HHCS bolts, 4 lock washers and an O-ring. LOHQ1 Code 61 Flange Connector Code 61 / ORFS 2 1 Code 61 C E L Y -S 12 LOHQ1 3/4 3/ / LOHQ / LOHQ1 1 1/4 1 1/ / LOHQ1 1 1/2 1 1/ /8 3.0 LOHQ2 Code 62 Flange Connector Code 62 / ORFS * Y Across Wrench Flats * Y Across Wrench Flats 1 2 C E L Y Code 62 -S 12 LOHQ2 3/4 3/ / LOHQ / LOHQ2 1 1/4 1 1/ / LOHQ2 1 1/2 1 1/ /8 4.5 XHQ1 Code 61 Flange Connector Code 61 / 37 Flare XHQ2 Code 62 Flange Connector Code 62 / 37 Flare * Y Across Wrench Flats * Y Across Wrench Flats 1 2 C E L Y Code 61 -S 12 XHQ1 3/4 3/ / XHQ / XHQ1 1 1/4 1 1/ / XHQ1 1 1/2 1 1/ / XHQ / C E L Y Code 62 -S 12 XHQ2 3/4 3/ / XHQ / XHQ2 1 1/4 1 1/ / XHQ2 1 1/2 1 1/ / Parker Hannifin Corporation

82 Hydraulic Flanges LOVQ1 Code 61 Flange 45 Elbow Code 61 / ORFS LOVQ2 Code 62 Flange 45 Elbow Code 62 / ORFS * Y Across Wrench Flats 1 2 C E M1 N1 Y -S 12 LOVQ1 3/4 3/ / LOVQ / LOVQ1 1 1/4 1 1/ /8 4.0 XVQ1 Code 61 Flange 45 Elbow Code 61 / 37 Flare N1 E M1 1 2 C * Y Across Wrench Flats 1 2 C E M1 N1 Y -S 12 XVQ1 3/4 3/ / XVQ / XVQ1 1 1/4 1 1/ / XVQ1 1 1/2 1 1/ / XVQ /2 2.0 LOEQ1 Code 61 Flange 90 Elbow Code 61 / ORFS Y* * Y Across Wrench Flats 1 2 C E M1 N1 Y -S 16 LOVQ / LOVQ2 1 1/4 1 1/ / LOVQ2 1 1/2 1 1/ /2 4.5 XVQ2 Code 62 Flange 45 Elbow Code 62 / 37 Flare N1 E M1 1 2 C * Y Across Wrench Flats 1 2 C E M1 N1 Y -S 12 XVQ2 3/4 3/ / XVQ / XVQ2 1 1/4 1 1/ / XVQ2 1 1/2 1 1/ /2 3.0 LOEQ2 Code 62 Flange 90 Elbow Code 62 / ORFS Y* * Y Across Wrench Flats 1 2 C E M N Y -S 12 LOEQ1 3/4 3/ / LOEQ / LOEQ1 1 1/4 1 1/ / LOEQ1 1 1/2 1 1/ XEQ1 Code 61 Flange 90 Elbow Code 61 / 37 Flare Y* N E M 2 C * Y Across Wrench Flats 1 2 C E M N Y -S -SS -B 12 XEQ1 3/4 3/ / XEQ / XEQ1 1 1/4 1 1/ / XEQ1 1 1/2 1 1/ XEQ / * Y Across Wrench Flats 1 2 C E M N Y -S 12 LOEQ2 3/4 3/ / LOEQ / LOEQ2 1 1/4 1 1/ / LOEQ2 1 1/2 1 1/ XEQ2 Code 62 Flange 90 Elbow Code 62 / 37 Flare Y* N E M 2 C * Y Across Wrench Flats 1 2 C E M N Y -S -SS -B 12 XEQ2 3/4 3/ / XEQ / XEQ2 1 1/4 1 1/ / XEQ2 1 1/2 1 1/ Parker Hannifin Corporation

83 Bin Kits and Thread ID Tools Bin Kits and Thread ID Tools 81 Parker Hannifin Corporation

84 Bin Kits and Thread ID Tools Bin Kits and Thread ID Tools XPKT02096 O-Ring Face Seal Adapter Bin Kit XPKT Flare Adapter Bin Kit PKT05603 Pipe Adapter Bin Kit Bin Kits Thread ID Tools Page 83 MIK-1 Thread Identification Kit Page 84 Portboard A Portboard Portboard B Portboard Page 85 ITK International Thread Kit Tube End Connections Thread Size Guide Inch Thread Page 86 Page 86 Page 86 Page 86 Page Parker Hannifin Corporation

85 Bin Kits Bin Kits and Thread ID Tools O-Ring Face Seal Adapter Bin Kit The Parker O-Ring Face Seal Adapter Bin, part number XPKT02096, is offered with a wide variety of configurations and sizes. All adapters conform to SAE J1453. Features include: Pre-packaged assortment of the most popular O-ring face seal adapters sizes range from 4 through 24 (1/4" through 1-1/2" O.D. tubing). Matching pre-printed bin labels. Total of 40 compartments for easy control of inventory. Part Number XPKT02096 includes the following*: Part Number Description Qty 4 F5OLO-S 1/4" Straight Thread Connector 10 6 F5OLO-S 3/8" Straight Thread Connector 10 8 F5OLO-S 1/2" Straight Thread Connector 5 10 F5OLO-S 5/8" Straight Thread Connector 5 12 F5OLO-S 3/4" Straight Thread Connector 5 16 F5OLO-S 1" Straight Thread Connector 1 4 C5OLO-S 1/4" Straight Thread 90 Elbow 5 6 C5OLO-S 3/8" Straight Thread 90 Elbow 5 8 C5OLO-S 1/2" Straight Thread 90 Elbow 5 10 C5OLO-S 5/8" Straight Thread 90 Elbow 2 12 C5OLO-S 3/4" Straight Thread 90 Elbow 2 16 C5OLO-S 1" Straight Thread 90 Elbow 1 4 FLO-S 1/4" Pipe Thread Connector FLO-S 1/4" Pipe Thread Connector 10 6 FLO-S 3/8" Pipe Thread Connector FLO-S 3/8" Pipe Thread Connector 5 8 FLO-S 1/2" Pipe Thread Connector FLO-S 1/2" Pipe Thread Connector 5 10 FLO-S 5/8" Pipe Thread Connector 5 12 FLO-S 3/4" Pipe Thread Connector 5 16 FLO-S 1" Pipe Thread Connector 5 Part Number Description Qty 4 C6LO-S 1/4" Swivel Nut 90 Elbow 5 6 C6LO-S 3/8" Swivel Nut 90 Elbow 5 8 C6LO-S 1/2" Swivel Nut 90 Elbow 5 10 C6LO-S 5/8" Swivel Nut 90 Elbow 5 12 C6LO-S 3/4" Swivel Nut 90 Elbow 1 4 FNL-S 1/4" Cap 10 6 FNL-S 3/8" Cap 10 8FNL-S 1/2" Cap 5 10 FNL-S 5/8" Cap 5 12 FNL-S 3/4" Cap 5 16 FNL-S 1" Cap 5 4 PNLO-S 1/4" Plug 10 6 PNLO-S 3/8" Plug 10 8 PNLO-S 1/2" Plug 5 10 PNLO-S 5/8" Plug 5 12 PNLO-S 3/4" Plug 5 16 PNLO-S 1" Plug 5 4 CLO-S 1/4" Pipe Thread 90 Elbow 5 8 CLO-S 1/2" Pipe Thread 90 Elbow 5 40B 40 Bin Cabinet 1 P17201 Bin Label 1 set *The parts may be ordered as a set without the bin. Order part number PMH Parker Hannifin Corporation

86 Bin Kits and Thread ID Tools 37 Flare Adapter Bin Kit The Parker 37 Flare Adapter Bin, part number XPKT02095, is offered with a wide variety of pipe, swivel nut and straight thread ends. Features include: Pre-packaged assortment of the most popular 37 flare adapters sizes range from 4 through 16 (1/4" through 1" O.D. tubing). Matching pre-printed bin labels. Total of 40 compartments for easy control of inventory. Part Number XPKT02095 includes the following*: Part Number Description Qty 4 F5OX-S 1/4" Straight Thread Adapter 10 6 F5OX-S 3/8" Straight Thread Adapter 10 8 F5OX-S 1/2" Straight Thread Adapter F5OX-S 1/2" Straight Thread Adapter 5 10 F5OX-S 5/8" Straight Thread Adapter 5 12 F5OX-S 3/4" Straight Thread Adapter 5 16 F5OX-S 1" Straight Thread Adapter 1 4 C5OX-S 1/4" Straight Thread 90 Elbow 5 6 C5OX-S 3/8" Straight Thread 90 Elbow 5 8 C5OX-S 1/2" Straight Thread 90 Elbow 5 10 C5OX-S 5/8" Straight Thread 90 Elbow 2 12 C5OX-S 3/4" Straight Thread 90 Elbow 2 4 FTX-S 1/4" Male Adapter FTX-S 1/4" Male Adapter 10 6 FTX-S 3/8" Male Adapter FTX-S 3/8" Male Adapter 5 8 FTX-S 3/8" Male Adapter FTX-S 1/2" Male Adapter 5 10 FTX-S 5/8" Male Adapter 5 12 FTX-S 3/4" Male Adapter 5 16 FTX-S 1" Male Adapter 5 Part Number Description Qty 4 C6X-S 1/4" Swivel Nut 90 Elbow 5 6 C6X-S 3/8" Swivel Nut 90 Elbow 5 8 C6X-S 1/2" Swivel Nut 90 Elbow 5 10 C6X-S 5/8" Swivel Nut 90 Elbow 5 12 C6X-S 3/4" Swivel Nut 90 Elbow 1 4 FNTX-S 1/4" Cap 10 5 FNTX-S 5/16" Cap 10 6 FNTX-S 3/8" Cap 10 8 FNTX-S 1/2" Cap 5 10 FNTX-S 5/8" Cap 5 12 FNTX-S 3/4" Cap 5 16 FNTX-S 1" Cap 5 4 PNTX-S 1/4" Plug 10 5 PNTX-S 5/16" Plug 10 6 PNTX-S 3/8" Plug 10 8 PNTX-S 1/2" Plug 5 10 PNTX-S 5/8" Plug 5 12 PNTX-S 3/4" Plug 5 16 PNTX-S 1" Plug 5 40B 40 Bin Cabinet 1 P17200 Bin Label 1 set *The parts may be ordered as a set without the bin. Order part number PMH Parker Hannifin Corporation

87 Bin Kits and Thread ID Tools Pipe Adapter Bin Kit Parker s Pipe Adapter Bin Kit offers a variety of pipe adapters with NPT/NPTF male and female port ends. Features include: Pre-packaged assortment of the most popular pipe adapter. Matching pre-printed bin labels. 40 compartment bin for easy control of inventory. Part Number PKT05603 includes the following*: Part Number Description Qty 1/4 FF-S 1/4" Pipe Nipple 4 3/8 FF-S 3/8" Pipe Nipple 4 1/2 FF-S 1/2" Pipe Nipple 4 3/4 FF-S 3/4" Pipe Nipple 2 1 FF-S 1" Pipe Nipple 2 1/4 CR-S 1/4" Pipe Elbow 4 3/8 CR-S 3/8" Pipe Elbow 4 1/2 CR-S 1/2" Pipe Elbow 4 3/4 CR-S 3/4" Pipe Elbow 2 1 CR-S 1" Pipe Elbow 2 1/4 X 1/8 PTR-S 1/4" X 1/8" Pipe Reducer 4 3/8 X 1/4 PTR-S 3/8" X 1/4" Pipe Reducer 4 1/2 X 1/4 PTR-S 1/2" X 1/4" Pipe Reducer 2 1/2 X 3/8 PTR-S 1/2" X 3/8" Pipe Reducer 4 3/4 X 1/2 PTR-S 3/4" X 1/2" Pipe Reducer 4 1 X 3/4 PTR-S 1" X 3/4" Pipe Reducer 2 1 1/4 X 1 PTR-S 1 1/4" X 1" Pipe Reducer 2 1/4 CD-S 1/4" Street Elbow 4 3/8 CD-S 3/8" Street Elbow 4 1/2 CD-S 1/2" Street Elbow 4 3/4 CD-S 3/4" Street Elbow 2 1 CD-S 1" Street Elbow 2 Part Number Description Qty 1/4 GG-S 1/4" Pipe Coupling 4 3/8 GG-S 3/8" Pipe Coupling 4 1/2 GG-S 1/2" Pipe Coupling 4 3/4 GG-S 3/4" Pipe Coupling 2 1 GG-S 1" Pipe Coupling /4" Male/Female Swivel /8" Male/Female Swivel /2" Male/Female Swivel /4" Male/Female Swivel " Male/Female Swivel /4" Pipe Swivel /8" Pipe Swivel /2" Pipe Swivel /4" Pipe Swivel /4" Pipe Swivel /8" Pipe Swivel /2" Pipe Swivel /4" Pipe Swivel B-Cabinet 40 Slot Bin Cabinet 1 Pipe Bin Labels Self Adhesive Labels 1 set *The parts may be ordered as a set without the bin. Order part number PMH Parker Hannifin Corporation

88 Bin Kits and Thread ID Tools Thread Identification Kit Part No. MIK-1 The Thread Identification Kit can be used to identify metric, BSP, SAE and NPT threads, as well as SAE flanges. It con-tains thread gauges, calipers, thread profiles, and an instruction booklet that details most thread forms and connection styles found in fluidpower systems worldwide. Fig. S144 Thread Identification Kit Portboards The Portboards can be used for identification of ISO, SAE, BSP and NPT ports and port threads. They are machined with female threads for quick and easy identification by screwing in the male port end. Part No. Portboard A Portboard A (SAE Straight Thread -2 through -32 and NPT 1/8 through 1 1/2). Fig. S145 Portboard A Portboard B (Metric 8mm through 48mm and BSP 1/8 through 1 1/2). Part No. Portboard B Fig. S146 Portboard B International Thread Kit Part No. ITK Parker s International Thread Kit offers the necessary tools to identify almost any thread you may encounter. The new ITK has LL, L and S series plugs to identify female DIN threads such as EO style hose ends. It also includes the MIK-1 and BSPP plugs in order to identify BSPP hose ends from 1/8 to 2. Fig. S147 International Thread Kit (ITK) 86 Parker Hannifin Corporation