Group 8. High Pressure Fittings and Tubing

Transcription

1 Group 8 High Pressure Fittings and Tubing

2 8 INDEX Page Contents 2 Index 3 0K Fittings NPT-NPT 4 0K Fittings JIC-JIC 5 0K Fittings JIC-NPT 6 0K Fittings BSP-BSP 7 0K Fittings BSP-JIC, BSP-NPT 8 Adapters - HP Fittings 5 9- Low Pressure Fitting and Tubing Low Pressure 2-3 Low Pressure Tubing 4-9 Medium Pressure Fittings and Tubing 20 Medium Pressure Coned-and-ed Nipples 2-25 High Pressure Fittings and Tubing High Pressure Tubing 28 High Pressure Coned-and-ed Nipples 29 A-LOCK Instrumentation fittings 8-2

3 0K FITTINGS PSI NPT - NPT 0K FITTINGS PSI NPT - NPT 8 Material Quality: AISI stainless steel. Material certificate according to DIN B. Other material qualities available on request. STAINLESS STEEL NPT - NPT 2 Nipple Socket Nipple Socket Plug Cap /8 /8 HN0K-0202 HC0K-0202 FMA0K-0202 HP0K-02 PC0K-02 /8 HN0K-0204 HC0K-0204 FMA0K-0204 /8 FMA0K-0402 HN0K-0404 HC0K-0404 FMA0K-0404 HP0K-04 PC0K-04 HN0K-0406 HC0K-0406 FMA0K-0406 /2 HN0K-0408 HC0K-0408 FMA0K-0408 FMA0K-0604 HN0K-0606 HC0K-0606 FMA0K-0606 HP0K-06 PC0K-06 /2 HN0K-0608 HC0K-0608 FMA0K-0608 /2 FMA0K-0804 /2 FMA0K-0806 /2 /2 HN0K-0808 HC0K-0808 FMA0K-0808 HP0K-08 PC0K-08 /2 3/4 HN0K-082 HC0K-082 FMA0K-082 /2 HN0K-086 HC0K-086 FMA0K-086 3/4 /2 FMA0K-208 3/4 3/4 HN0K-22 HC0K-22 FMA0K-22 HP0K-2 PC0K-2 3/4 HN0K-26 HC0K-26 FMA0K-26 /2 FMA0K-608 3/4 FMA0K-62 HN0K-66 HC0K-66 FMA0K-66 HP0K-6 PC0K-6 NPT - NPT 2 Elbow 90 o Female Elbow 90 o Male Elbow 90 o Male/Female Tee Female /8 /8 FE0K-0202 ME0K-0202 FME0K-0202 FT0K-02 MT0K-02 FE0K-0404 ME0K-0404 FME0K-0404 FT0K-04 MT0K-04 FE0K-0606 ME0K-0606 FME0K-0606 FT0K-06 MT0K-06 /2 /2 FE0K-0808 ME0K-0808 FME0K-0808 FT0K-08 MT0K-08 Tee Male Other dimensions, thread types or PSI are available on request. 8-3 Safety factor: 4:

4 8 0K FITTINGS PSI JIC - JIC JIC - JIC 2 Nipple Nipple Socket Plug Cap 7/6-20 7/6-20 JHN0K-0404 JMFS0K-0404 JHP0K-04 JPC0K /6-20 9/6-8 JHN0K-0406 JMFS0K /6-20 3/4-6 JHN0K-0408 JMFS0K-0408 /2-20 /2-20 JHN0K-0505 JMFS0K-0505 JHP0K-05 JPC0K /6-8 9/6-8 JHN0K-0606 JMFS0K-0606 JHP0K-06 JPC0K /6-8 3/4-6 JHN0K-0608 JMFS0K /6-8 7/8-4 JHN0K-060 JMFS0K-060 9/6-8./6-2 JHN0K-062 JMFS0K-062 3/4-6 3/4-6 JHN0K-0808 JMFS0K-0808 JHP0K-08 JPC0K /8-4 7/8-4 JHN0K-00 JMFS0K-00 JHP0K-0 JPC0K-00./6-2./6-2 JHN0K-22 JMFS0K-22 JHP0K-2 JPC0K-22.5/6-2.5/6-2 JHN0K-66 JMFS0K-66 JHP0K-6 JPC0K-66 JIC - JIC 2 Elbow 90 o Male Tee Male Swivel 7/6-20 7/6-20 JME0K-0404 JMT0K-04 JFFS0K /6-20 9/6-8 JFFS0K /6-20 3/4-6 JFFS0K-0408 /2-20 /2-20 JME0K-0505 JFFS0K /6-8 9/6-8 JME0K-0606 JMT0K-06 JFFS0K /6-8 3/4-6 JFFS0K /6-8 7/8-4 JFFS0K-060 9/6-8./6-2 JFFS0K-062 3/4-6 3/4-6 JME0K-0808 JMT0K-08 JFFS0K /8-4 7/8-4 JME0K-00 JMT0K-0./6-2./6-2 JME0K-22 JMT0K-2.5/6-2.5/6-2 JME0K-66 JMT0K-6 Other dimensions, thread types or PSI are available on request. 8-4

5 0K FITTINGS PSI JIC - NPT 8 JIC - NPT 2 Nipple Nipple Socket Elbow 90 o Male Swivel Nipple 7/6-20 /8 NJHN0K-0402 NJFMA0K-0402 NJME0K-0402 NJMFS0K /6-20 NJHN0K-0404 NJFMA0K-0404 NJME0K-0404 NJMFS0K /6-20 NJHN0K-0406 NJFMA0K-0406 NJME0K-0406 NJMFS0K-0406 /2-20 NJHN0K-0504 NJFMA0K-0504 NJME0K-0504 NJMFS0K /6-8 NJHN0K-0604 NJFMA0K-0604 NJME0K-0604 NJMFS0K /6-8 NJHN0K-0606 NJFMA0K-0606 NJME0K-0606 NJMFS0K /6-8 /2 NJHN0K-0608 NJFMA0K-0608 NJME0K-0608 NJMFS0K /4-6 NJHN0K-0806 NJFMA0K-0806 NJME0K-0806 NJMFS0K /4-6 /2 NJHN0K-0808 NJFMA0K-0808 NJME0K-0808 NJMFS0K /4-6 3/4 NJHN0K-082 NJFMA0K-082 NJME0K-082 NJMFS0K-082 7/8-4 /2 NJHN0K-008 NJFMA0K-008 NJME0K-008 NJMFS0K-008 7/8-4 3/4 NJHN0K-02 NJFMA0K-02 NJME0K-02 NJMFS0K-02./6-2 /2 NJHN0K-208 NJFMA0K-208 NJME0K-208 NJMFS0K-208./6-2 3/4 NJHN0K-22 NJFMA0K-22 NJME0K-22 NJMFS0K-22.5/6-2 3/4 NJHN0K-62 NJFMA0K-62 NJME0K-62 NJMFS0K-62.5/6-2 3/4 NJHN0K-66 NJFMA0K-66 NJME0K-66 NJMFS0K-66 Other dimensions, thread types or PSI are available on request. 8-5

6 8 0K FITTINGS PSI BSP - BSP BSP - BSP 2 Nipple Socket Nipple Socket Plug Cap /8 /8 HB0K-0202 HCB0K-0202 BMF0K-0202 HPB0K-02 BPC0K-02 /8 HB0K-0204 HCB0K-0204 BMF0K-0204 /8 BMF0K-0402 HB0K-0404 HCB0K-0404 BMF0K-0404 HPB0K-04 BPC0K-04 HB0K-0406 HCB0K-0406 BMF0K-0406 /2 HB0K-0408 HCB0K-0408 BMF0K-0408 BMF0K-0604 HB0K-0606 HCB0K-0606 BMF0K-0606 HPB0K-06 BPC0K-06 /2 HB0K-0608 HCB0K-0608 BMF0K-0608 /2 BMF0K-0804 /2 BMF0K-0806 /2 /2 HB0K-0808 HCB0K-0808 BMF0K-0808 HPB0K-08 BPC0K-08 /2 3/4 HB0K-082 HCB0K-082 BMF0K-082 /2 HB0K-086 HCB0K-086 BMF0K-086 3/4 /2 BMF0K-208 3/4 3/4 HB0K-22 HCB0K-22 BMF0K-22 HPB0K-2 BPC0K-2 3/4 HB0K-26 HCB0K-26 BMF0K-26 /2 BMF0K-608 3/4 BMF0K-62 HB0K-66 HCB0K-66 BMF0K-66 HPB0K-6 BPC0K-6 BSP - BSP 2 Elbow 90 o Female Elbow 90 o Male/Female Tee Female Swivel /8 /8 BEFFS0K-0202 MFEB0K-0202 FTB0K-02 BFFS0K-0202 BEFFS0K-0404 MFEB0K-0404 FTB0K-04 BFFS0K-0404 BEFFS0K-0606 MFEB0K-0606 FTB0K-06 BFSS0K-0606 /2 /2 BEFFS0K-0808 MFEB0K-0808 FTB0K-08 BFSS0K /4 3/4 BEFFS0K-22 MFEB0K-22 FTB0K-2 BFSS0K-22 BEFFS0K-66 MFEB0K-66 FTB0K-6 BFSS0K-66 Other dimensions, thread types or PSI are available on request. Safety factor: 4: 8-6

7 0K FITTINGS PSI BSP - JIC /BSP -NPT 8 BSP - JIC Nipple Nipple Socket Swivel Nipple 7/6-20 BJHN0K-0404 BJMFS0K-0404 BJFFS0K /6-8 BJHN0K-0406 BJMFS0K-0406 BJFFS0K /4-6 BJHN0K-0408 BJMFS0K-0408 BJFFS0K /6-20 BJHN0K-0604 BJMFS0K-0604 BJFFS0K /6-8 BJHN0K-0606 BJMFS0K-0606 BJFFS0K /4-6 BJHN0K-0608 BJMFS0K-0608 BJFFS0K-0608./6-2 BJHN0K-062 BJMFS0K-062 BJFFS0K-062 /2 9/6-8 BJHN0K-0806 BJMFS0K-0806 BJFFS0K-0806 /2 3/4-6 BJHN0K-0808 BJMFS0K-0808 BJFFS0K-0808 /2./6-2 BJHN0K-082 BJMFS0K-082 BJFFS0K-082 3/4 3/4-6 BJHN0K-208 BJMFS0K-208 BJFFS0K-208 3/4./6-2 BJHN0K-22 BJMFS0K-22 BJFFS0K-22 BSP- NPT 2 Nipple Nipple Socket HNB0K-0404 FMABN0K-0404 HNB0K-0406 FMABN0K-0406 HNB0K-0604 FMABN0K-0604 HNB0K-0606 FMABN0K-0606 /2 HNB0K-0608 FMABN0K-0608 /2 HNB0K-0806 FMABN0K-0806 /2 /2 HNB0K-0808 FMABN0K-0808 /2 3/4 HNB0K-082 FMABN0K-082 3/4 /2 HNB0K-208 FMABN0K-208 3/4 3/4 HNB0K-22 FMABN0K-22 /2 HNB0K-608 FMABN0K-608 3/4 HNB0K-62 FMABN0K-62 HNB0K-66 FMABN0K HNB0K-3232 FMABN0K-3232 Other dimensions, thread types or PSI are available on request. 8-7

8 8 ADAPTERS - HP FITTINGS PSI ADAPTERS - HP FITTINGS Couplings 2 Couplings Part No. Description Special Transition Nipples Part No. Description Special Transition Nipples ASB-44 Med. Press. Couplings male / male ASB-544 Med. Press. Couplings male / female ASB-46 Med. Press. Couplings male / male ASB-546 Med. Press. Couplings male / female ASB-64 Med. Press. Couplings male / male ASB-564 Med. Press. Couplings male / female ASB-66 Med. Press. Couplings male / male ASB-566 Med. Press. Couplings male / female 9/6 ASB-69 Med. Press. Couplings male / male ASB-569 Med. Press. Couplings male / female 9/6 ASB-96 Med. Press. Couplings male / male ASB-596 Med. Press. Couplings male / female 9/6 9/6 ASB-99 Med. Press. Couplings male / male ASB-599 Med. Press. Couplings male / female 7/6 ASB-244 Med. Press. Coupling x JIC male / male ASB-5246 Med. Press. Coupling x JIC female / male 9/6 ASB-246 Med. Press. Coupling x JIC male / male ASB-5264 Med. Press. Coupling x JIC female / male 7/6 ASB-264 Med. Press. Coupling x JIC male / male ASB-5264 Med. Press. Coupling x JIC female / male 9/6 ASB-266 Med. Press. Coupling x JIC male / male ASB-5266 Med. Press. Coupling x JIC female / male 9/6 7/6 ASB-294 Med. Press. Coupling x JIC male / male ASB-5294 Med. Press. Coupling x JIC female / male 9/6 9/6 ASB-296 Med. Press. Coupling x JIC male / male ASB-5296 Med. Press. Coupling x JIC female / male 9/6 3/4 ASB-298 Med. Press. Coupling x JIC male / male ASB-5298 Med. Press. Coupling x JIC female / male ASB-344 Med. Press. Coupling x BSP male / male ASB-5344 Med. Press. Coupling x BSP female / male ASB-346 Med. Press. Coupling x BSP male / male ASB-5346 Med. Press. Coupling x BSP female / male 3/4 ASB-348 Med. Press. Coupling x BSP male / male ASB-5348 Med. Press. Coupling x BSP female / male ASB-364 Med. Press. Coupling x BSP male / male ASB-5364 Med. Press. Coupling x BSP female / male ASB-366 Med. Press. Coupling x BSP male / male ASB-5366 Med. Press. Coupling x BSP female / male /2 ASB-368 Med. Press. Coupling x BSP male / male ASB-5368 Med. Press. Coupling x BSP female / male 9/6 ASB-394 Med. Press. Coupling x BSP male / male ASB-5394 Med. Press. Coupling x BSP female / male 9/6 ASB-396 Med. Press. Coupling x BSP male / male ASB-5396 Med. Press. Coupling x BSP female / male 9/6 /2 ASB-398 Med. Press. Coupling x BSP male / male ASB-5398 Med. Press. Coupling x BSP female / male ASB-444 Med.Press. Coupling x NPT male / male ASB-5444 Med.Press. Coupling x NPT female / male ASB-446 Med. Press. Coupling x NPT male / male ASB-5446 Med. Press. Coupling x NPT female / male ASB-464 Med. Press. Coupling x NPT male / male ASB-5464 Med. Press. Coupling x NPT female / male ASB-466 Med. Press. Coupling x NPT male / male ASB-5466 Med. Press. Coupling x NPT female / male /2 ASB-468 Med. Press. Coupling x NPT male / male ASB-5468 Med. Press. Coupling x NPT female / male 9/6 ASB-494 Med. Press. Coupling x NPT male / male ASB-5494 Med. Press. Coupling x NPT female / male 9/6 ASB-496 Med. Press. Coupling x NPT male / male ASB-5496 Med. Press. Coupling x NPT female / male 9/6 /2 ASB-498 Med. Press. Coupling x NPT male / male ASB-5498 Med. Press. Coupling x NPT female / male 9/6 ASB-9246 High Press. Coupling x JIC male / male 9/6 ASB-9266 High Press. Coupling x JIC male / male 9/6 9/6 ASB-9296 High Press. Coupling x JIC male / male ASB-9344 High Press. Coupling x BSP male / male ASB-9844 High Press. Coupling x NPT male / female ASB-9364 High Press. Coupling x BSP male / male ASB - st Coupling Type = MP Male 5= MP Female 2= JIC Male 6= JIC Female 3= BSP Male 7= BSP Female 4= NPT Male 8= NPT Female 9= HP Male?= HP Female 2nd Coupling Type = MP Male 5= MP Female 2= JIC Male 6= JIC Female 3= BSP Male 7= BSP Female 4= NPT Male 8= NPT Female 9= HP Male?= HP Female Size Size 2 Other dimensions, thread types or PSI are available on request. 8-8

9 LOW PRESSURE FITTINGS AND TUBING 8 LOW PRESSURE FITTINGS AND TUBING Pressures to psi (034 bar) Since 945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned Autoclave a reputation for reliable, efficient product performance. Autoclave Engineers has long been established as the world leader in high pressure fluid handling components for the chemical/petrochemical,research, and oil and gas industries. LOW PRESSURE FITTINGS AND TUBING FEATURES: Single-ferrule compression sleeve. Fast easy make-up of connection. Available sizes are /6, /8,,, & /2. Fittings manufactured from cold worked stainless steel. Tubing is manufactured from dual rated /L and 304/304L annealed stainless steel. All items available in special materials. Operating temperatures from -00 F (-73 C) to 650 F (343 C). Molybdenum disulfide-coated gland nuts to prevent galling. The Low Pressure Series uses Autoclave s SpeedBite connection. This single-ferrule compression sleeve connection delivers fast, easy makeup and reliable bubble-tight performance, in liquid or gas service. Autoclave Engineers Low Pressure Fittings are designed for use with low pressure valves and tubing. These fittings feature improved SpeedBite compression connections with larger orifices for excellent flow capabilities. Autoclave fittings and components are manufactured of cold-worked type stainless steel. Optional materials are available upon request. Connection Components All valves and fittings are supplied complete with appropriate glands and compression sleeves. To order these components separately, use order numbers listed. When using plug, sleeve is not required. Gland SMN ( ) Sleeve SSL ( ) When ordering glands separately for 0V Series and valves, substitute 0N for SMN. /6 tubing system components are available in the minifitting series. /6 tubing components can be used in 0V Series valves and fittings if required. Consult factory for information on /6 tubing assembly in /8 tubing components. Plug SP ( ) Add tube size ( ) / /2-80 Example: Gland - SMN 40 To ensure proper fit use Autoclave Engineers tubing. For mounting hole option add suffix PM to catalog number. Consult factory for mounting hole dimensions. Note: Special material glands may be supplied with four flats in place of standard hex. 8-9

10 8 LOW PRESSURE FITTINGS AND TUBING Dimensions - inches (mm) Catalog Number Connection Type Outside Diameter Tube Pressure Rating psi (bar)* Minimum Opening A B C D Typical E F G Block Fitting Pattern Elbow SL2200 SL4400 SL6600 SL8800 W25 SW250 SW375 SW500 /8 (3.8) /2 (2.70) (034.9) (034.9) (034.9) 0,000 (689.46) 0.88 (4.78) (63.50) 0.3 (7.87) 0.44 (.8) (3.46) (3.46) 0.63 (5.88) 0.93 (23.62).25 (3.75).25 (3.75) (5.75) See Fig. Tee ST2220 ST4440 ST6660 ST8880 W25 SW250 SW375 SW500 /8 (3.8) /2 (2.70) (034.9) (034.9) (034.9) 0,000 (689.46) 0.88 (4.78) (63.50) 0.3 (7.87) 0.44 (.8) (3.46) (3.46) 0.63 (5.88) 0.93 (23.62).25 (3.75).25 (3.75) (5.75) See Fig. 2 Cross SX2222 SX4444 SX6666 SX8888 W25 SW250 SW375 SW500 /8 (3.8) /2 (2.70) (034.9) (034.9) (034.9) 0,000 (689.46) 0.88 (4.78) (63.50) 2.50 (63.50) 0.3 (7.87) 0.44 (.8) (3.46) (3.46) 0.63 (5.88) 0.93 (23.62).25 (3.75).25 (3.75) (5.75) See Fig. 3 *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. 8-0

11 LOW PRESSURE FITTINGS AND TUBING 8 Dimensions - inches (mm) Catalog Number Connection Type Outside Diameter Tube Pressure Rating psi (bar)* Minimum Opening A B C D Typical E F G Block Fitting Pattern Straight Coupling 5F22 6F4422 6F6622 4F8822 W25 SW250 SW375 SW500 /8 (3.8) /2 (2.70) (034.9) (034.9) (034.9) 0,000 (689.46) 0.88 (4.78) (2.70) (5.75).25 (3.75) (7.87) 0.44 (.8) (3.46) (3.46) 0.63 (5.88) 0.93 (23.62) See Fig. 4 Bulkhead Coupling 5BF22 6BF4422 6BF6622 4BF8822 W25 SW250 SW375 SW500 /8 (3.8) /2 (2.70) (034.9) (034.9) (034.9) 0,000 (689.46) 0.88 (4.78) (7.53) (23.88) (23.88).20 (28.45) (47.75).88 (47.75) 2.38 (60.45) 0.3 (7.87) 0.44 (.8) (3.46) (3.46) 0.63 (5.88) 0.93 (23.62) 0.50 (2.70) 0.50 (2.70) 0.78 (9.8) See Fig. 5 *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. 8 -

12 8 LOW PRESSURE TUBING LOW PRESSURE TUBING Pressures to psi (034 bar) Autoclave Engineers offers a complete selection of annealed, seamless stainless steel tubing designed to match the performance standards of Autoclave low pressure valves and fittings. Autoclave low pressure tubing is furnished in random lengths between 20 feet (6 meters) and 26.5 feet (8.0 meters). The average is 24 feet (7.3 meters). The tubing is available in five sizes and a variety of materials. In order to ensure proper sleeve bite into tubing, Autoclave Engineers specifies and controls the strength levels of both the tube and sleeve materials. INSPECTION AND TESTING Autoclave Engineers low pressure tubing is inspected for compliance with specified defect restrictions as well as carburization or intergranular carbide precipitation. The tubing outside diameter and wall thickness is controlled within close tolerance to assure proper fit. Sample pieces of tube (for each lot) are tested to confirm mechanical properties for proper compression sleeve bite and pressure capability. Furthermore, the sample tubes are pressure tested as a final check. SPECIAL MATERIALS In addition to the type /L and 304/304L stainless steel tubing listed in this section, Autoclave has a limited stock of hard-to-obtain shorter lengths of the following tubing materials: Monel 400*, Inconel 600*, Titanium Grade 2*, Nickel 200*, Hastelloy C276* - (* Trademark names) Please consult factory for stock availabilty. TUBING TOLERANCE Nominal Tubing Size Tolerance/Outside Diameter inches (mm) inches (mm) /6 (.59).064/.062 (.62/.57) /8 (3.8).28/.25 (3.25/3.8).254/.250 (6.45/6.35).379/.375 (9.74/9.53) /2 (2.70).505/.500 (2.83/2.70) 8-2

13 LOW PRESSURE TUBING 8 Tube Size Inches (mm) Working Pressure psi (bar)* Catalog Number Tube Materials Fits Connection Type Outside Diameter Inside Diameter Wall Flow Area in. 2 (mm 2 ) 0-00 F -7.8 to 37.8 C 200 F 93 C 400 F 204 C 600 F C 650 F 343 C MS5-070 SS W062 /6 (.59) (0.66) 0.08 (0.46) (034.20) (034.20) 4,400 (992.83) 3,600 (937.67) 2,600 (868.73) MS5-200 MS5-66** SS 304SS W (.32) (.75) (0.9) (0.7) (.29) (2.58) (034.20) 9,950 (686.02) (034.20) 9,400 (648.0) 4,400 (992.83) 8,550 (589.49) 3,600 (937.67) 8,450 (582.60) 2,600 (868.73) 8,000 (55.57) MS5-203 SS (2.3) (2.) (8.7) (034.6) (034.6) 4,400 (992.83) 3,600 (937.67) 2,600 (868.73) MS5-055 MS5-6** MS5-069 SS 304SS SS W250 or SW (3.8) 0.80 (4.57) 0.80 (4.57) (.57) (0.89) (0.89) 0.02 (7.74) (6.77) (6.77),650 (803.23) 5,450 (375.76) 5,450 (375.76),650 (76.86) 5,50 (355.07) 5,450 (375.76),250 (775.65) 4,700 (324.05) 5,250 (36.97) 0,600 (730.83) 4,600 (37.5) 4,950 (34.29) 9,850 (679.2) 4,400 (303.36) 4,600 (37.5) MS5-58** 304SS 0.94 (4.93) (0.7) (8.7) 4,600 (37.5) 4,350 (299.92) 3,950 (272.34) 3,900 (272.34) 3,700 (255.0) MS5-204 SS 0.39 (3.53) 0.8 () 0.05 (9.79) (034.6) (034.6) 4,400 (992.83) 3,600 (937.67) 2,600 (868.73) MS SS 0.95 (4.95) (2.29) (9.35) 0,000 (689.46) 9,400 (648.0) 8,600 (592.94) 8,500 (586.05) 8,450 (582.60) MS5-084 MS5-55** SS 304SS W375 or SW (4.95) (2.29) (.57) (9.35) (3.6) 0,000 (689.46) 7,500 (57.0) 0,000 (689.46) 7,00 (489.52) 9,650 (665.33) 6,450 (444.70) 9,000 (62) 6,350 (437.8) 8,400 (579.5) 6,050 (47.3) MS5-062 SS (.57) (3.6) 7,500 (57.0) 7,500 (57.0) 7,200 (496.4) 6,800 (468.84) 6,300 (434.36) MS5-62** 304SS (7.75) (0.89) (47.0) 3,800 (26) 3,550 (244.76) 3,250 (224.08) 3,200 (220.63) 3,050 (20.29) MS5-205 SS (6.86) 0.8 () (35.48) 0,000 (689.46) 0,000 (689.46) 9,650 (665.33) 9,000 (62) 8,400 (579.5) MS5-208** MS SS SS W500 or SW500 /2 (2.70) (6.86) () (.57) (35.48) 0.0 (70.97) 0,000 (689.46) 5,500 (379.2) 9,400 (648.0) 5,500 (379.2) 8,600 (592.94) 5,250 (36.97) 8,500 (586.05) 4,950 (34.29) 8,450 ( ,600 (37.5) MS5-65** 304SS (0.2) (.22) 0.27 (8.94) 4,000 (275.79) 3,750 (258.55) 3,400 (234.42) 3,400 (234.42) 3,200 (220.63) *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. **Items are being discontinued. Contact the factory for available stock All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. Consult your local representative. 8-3

14 8 MEDIUM PRESSURE FITTINGS AND TUBING MEDIUM PRESSURE FITTINGS AND TUBING Pressures to psi (379 bar) Since 945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned Autoclave a reputation for reliable, efficient product performance. Autoclave Engineers has long been established as the world leader in high pressure fluid handling components for the chemical/petrochemical,research, and oil and gas industries. MEDIUM PRESSURE FITTINGS, TUBING AND NIPPLES FEATURES: Coned-and-ed Connection. Available sizes are,, 9/6, 3/4, and -/2. Fittings manufactured from cold worked stainless steel. Tubing is manufactured from dual rated /L and 304/304L cold worked stainless steel. Operating Temperatures from -423 F (-252 C) to 200 F (649 C). Anti-vibration connection components available. All items available in special material. The medium pressure series uses Autoclave s medium pressure connection. This coned-and-threaded connection features orifice sizes to match the high flow characteristics of this series. Autoclave Engineers medium pressure fittings, Series SF, are designed for use with Series 20SM medium pressure valves and Autoclave medium pressure tubing. They incorporate medium pressure conedand-threaded connections with orifices sized to match the high-flow Series 20SC valves. Connection Components All Autoclave valves and fittings are supplied complete with appropriate glands and collars. To order these components separately, use order numbers listed. When using plug, collar is not required. Gland CGLX ( ) Collar CCLX ( ) Plug CPX ( ) Add tube size ( ) /6-90 3/ /2-240 To ensure proper fit use Autoclave Engineers tubing. Note: Special material glands may be supplied with four flats in place of standard hex. Example: Gland - CGLX

15 MEDIUM PRESSURE FITTINGS AND TUBING 8 Dimensions - inches (mm) Catalog Number Connection Type Outside Diameter Tube Pressure Rating psi (bar)* Minimum Opening A B C D Typical E F G Block Fitting Pattern Elbow CLX4400 CLX6600 CLX9900 CLX2 CLX6 CLX24 SF250CX SF375CX SF562CX SF750CX SF000CX SF500CX 9/6 (4.29) 3/4 -/2 (034.20) 0.25 (3.8) 0.29 (5.56) (9.2) 0.56 (3.) (7.48) 0.94 (23.80).2 (28.45) (57.5) 2.50 (63.50) 4.2 (04.65) (0.60) (46.05) 0.44 (.0) (3.46) (5.75) 0.72 (8.29).2 (28.45) 0.50 (2.70) (5.75) 0.94 (23.88).9 (30.23).88 (47.63).25 (3.75) 2.06 (52.32) 2.88 (73.03).25 (3.75) 2.06 (52.32) 2.88 (73.03) (5.75) (34.93) (57.5) See Fig. Tee CTX4440 CTX6660 CTX9990 CTX2 CTX6 CTX24 SF250CX SF375CX SF562CX SF750CX SF000CX SF500CX 9/6 (4.29) 3/4 -/2 (034.20) 0.25 (3.8) 0.29 (5.56) (9.2) 0.56 (3.) (7.48) 0.94 (23.80).2 (28.45) (57.5) 2.50 (63.50) 4.2 (04.65) (0.60) (46.05) 0.44 (.0) (3.46) (5.75) 0.72 (8.29).2 (28.45) 0.50 (2.70) (5.75) 0.94 (23.88).9 (30.23).88 (47.63).25 (3.75) 2.06 (52.32) 2.88 (73.03).25 (3.75) 2.06 (52.32) 2.88 (73.03) (5.75) (34.93) (57.5) See Fig. *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. For mounting hole option add suffix PM to catalog number. Consult factory for mounting hole dimensions. 8-5

16 8 MEDIUM PRESSURE FITTINGS AND TUBING Dimensions - inches (mm) Catalog Number Connection Type Outside Diameter Tube Pressure Rating psi (bar)* Minimum Opening A B C D Typical E F G Block Fitting Pattern Cross CXX4444 CXX6666 CXX9999 CXX2 CXX6 CXX24 SF250CX SF375CX SF562CX SF750CX SF000CX SF500CX 9/6 (4.29) 3/4 -/2 (034.20) 0.25 (3.8) 0.29 (5.56) (9.2) 0.56 (3.) (7.48) 0.94 (23.80) 2.50 (63.50) 2.50 (63.50) (04.65) (04.65) (46.05) (46.05) 0.44 (.0) (3.46) (5.75) 0.72 (8.29).2 (28.45) 0.50 (2.70) (5.75) 0.94 (23.88).9 (30.23).88 (47.63).25 (3.75) 2.06 (52.32) 2.88 (73.03).25 (3.75) 2.06 (52.32) 2.88 (73.03) (5.75) (34.93) (57.5) See Fig. 3 Straight Coupling / Union Coupling 20FX UFX FX UFX FX UFX FX2 20UFX2 20FX6 20UFX6 5FX24 5UFX24 SF250CX SF375CX SF562CX SF750CX SF000CX SF500CX 9/6 (4.29) 3/4 -/2 (034.20) 0.25 (3.8) 0.29 (5.56) (9.2) 0.56 (3.) (7.48) 0.94 (23.80) (5.75) (25.5).62 (4.5) (53.85) 2.50 (63.50) 3.50 (88.90) 5.00 (27.00) 0.44 (.0) (3.46) (5.75) 0.72 (8.29).2 (28.45) 0.50 (2.70) (5.75) 0.94 (23.88).9 (30.23).88 (47.63) Straight Union Straight Union Straight Union Straight Union Straight Union Straight Union See Fig. 4 *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. For mounting hole option add suffix PM to catalog number. Consult factory for mounting hole dimensions. Union Couplings are designed with a removable seat insert allowing disassembly and tubing removal without the necessity of loosening other items in a line. 8-6

17 MEDIUM PRESSURE FITTINGS AND TUBING 8 Dimensions - inches (mm) Catalog Number Connection Type Outside Diameter Tube Pressure Rating psi (bar)* Minimum Opening A B C D Typical E F G Block Fitting Pattern Bulkhead Coupling 20BFX BFX BFX BFX2 20BFX6 5BFX24 SF250CX SF375CX SF562CX SF750CX SF000CX SF500CX 9/6 (4.29) 3/4 -/2 (034.20) 0.25 (3.8) 0.29 (5.56) (9.2) 0.56 (3.) (7.48) 0.94 (23.80) 0.8 (20.57) 0.94 (23.88).2 (28.45).69 (42.93).94 (49.28) 2.44 (6.85).88 (47.75) 2.38 (60.45) 2.62 (66.55) 3.50 (88.90) 5.00 (27.00) 0.44 (.0) (3.46) (5.75) 0.72 (8.29).2 (28.45) 0.50 (2.70) (5.75) 0.94 (23.88).9 (30.23).88 (47.63) (3.46) (5.75) 0.78 (9.8) 0.9 (23.).88 (47.75).88+ (47.75) (63.50) See Fig. 5 *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. For mounting hole option add suffix PM to catalog number. Consult factory for mounting hole dimensions. + distance across flats 8-7

18 8 MEDIUM PRESSURE TUBING MEDIUM PRESSURE TUBING Pressures to psi (379 bar) Autoclave Engineers offers a complete selection of austenetic, cold drawn stainless steel tubing designed to match the performance standards of Autoclave valves and fittings. Autoclave medium pressure tubing is manufactured specifically for high pressure applications requiring both strength and corrosion resistance. The tubing is furnished in random lengths between 20 feet (6 meters) and 26.5 feet (8.0 meters). The average is 24 feet (7.3 meters). Medium Pressure Tubing is available in six sizes and a variety of materials. INSPECTION AND TESTING Autoclave Engineer s medium pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are subject to special inspection and are controlled within close tolerences to assure proper fit. Sample pieces of tube for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the tube. Autoclave will perform 00% hydrostatic testing at additional cost if desired. SPECIAL MATERIALS In addition to the type /L and 304/304L stainless steel tubing listed in this section, Autoclave has limited stock of hard-to-obtain special tubing materials: Monel 400*, Inconel 600*, Inconel 625*, Duplex, Super Duplex, Titanium Grade 2*, Nickel 200*, Hastelloy C276* (*Trademark names) Some are available in shorter lengths only. Please consult factory for stock availability. TUBING TOLERANCE Nominal Tubing Size Tolerance/Outside Diameter inches (mm) inches (mm).248/.243 (6.30/6.7).370/.365 (9.40/9.27) 9/6 (4.27).557/.552 (4.5/4.02) 3/4.745/.740 (8.92/8.80).995/.990 (25.27/25.4) -/2.495/.490 (37.98/37.85) 8-8

19 MEDIUM PRESSURE TUBING 8 Tube Size Inches (mm) Working Pressure psi (bar)* Catalog Number Tube Materials Fits Connection Type Outside Diameter Inside Diameter Wall Flow Area in. 2 (mm 2 ) -423 to 00 F -252 to 37.8 C 200 F 93 C 400 F 204 C 600 F C 800 F 427 C MS5-092 MS5-92 SS 304SS SF250CX 0.09 (2.77) (.78) (5.8) 8,950 (306.54) 9,250 (327.22) 7,200 (85.88) 8,050 (244.48) 7,000 (72.09) 6,800 (58.30) 6,50 (3.49) MS5-093 MS5-93 SS 304SS SF375CX (5.6) (2.8) (20.65) 9,250 (327.22) 9,250 (327.22) 8,050 (244.48) 8,050 (244.48) 6,800 (58.30) 6,800 (58.30) MS5-085 MS5-87 SS 304SS SF562CX 9/6 (4.29) 0.32 (7.92) 0.25 (3.8) (49.03) 9,250 (327.22) 9,250 (327.22) 8,050 (244.48) 8,050 (244.48) 6,800 (58.30) 6,800 (58.30) MS5-097 MS5-94 SS 304SS SF562CX 9/6 (4.29) (9.2) 0.0 (2.57) 0.0 (65.6) (034.6) (034.6) (034.6) 4,70 (976.97) 4,400 (992.83) 2,900 (889.4) 3,650 (94.2) 2,750 (879.07) 2,670 (873.55) 2,670 (873.55) MS5-095 MS5-098 SS SS SF750CX 3/ (.3) 0.56 (3.) 0.56 (3.96) 0.7 (2.97) 0.5 (97.42) (34.84) (034.6) (034.6) 9,250 (327.22) 4,400 (992.83) 8,050 (244.48) 3,650 (94.2) 6,800 (58.30) 2,670 (873.55) MS5-096 MS5-099 SS SS SF000CX (4.27) (7.48) 0.29 (5.56) 0.56 (3.96) (60.00) 0.37 (239.35) (034.6) (034.6) 9,250 (327.22) 4,400 (992.83) 8,050 (244.48) 3,650 (94.2) 6,800 (58.30) 2,670 (873.55) 304 SS SF500CX -/ (23.80) 0.28 (7.5) (444.88) (034.6) (034.6) 4,430 (994.90) 3,530 (932.85) 2,600 (868.73) Note: Caution should be exercised in proper selection of Medium Pressure Tubing based on actual operating conditions. Two series available: psi (034 bar) and psi (379 bar). *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. 8-9

20 8 MEDIUM PRESSURE CONED-AND-THREADED NIPPLES MEDIUM PRESSURE CONED-AND-THREADED NIPPLES Pressures to psi (379 bar) For rapid system make-up, Autoclave Engineers supplies precut, conedand-threaded nipples in various sizes and lengths for Autoclave medium pressure valves and fittings. SPECIAL LENGTHS In addition to the standard lengths listed in the table below, nipples are available in any custom length. Consult factory. MATERIALS** Catalog numbers in table refer to Type Stainless steel. Optional materials available. Consult factory. Catalog Number Nipple Length In (mm) Tube Size inches (mm) 2.75 (69.85) 4.00 (0.60) 6.00 (52.40) 8.00 (203.20) 0.00 (254.00) (304.80) Fits Connection Type O.D. I.D. Working Pressure at 00 F psi (bar)* CNX4402- CNX4403- CNX4404- CNX4406- CNX4408- CNX4400- CNX4402- SF250CX 0.09 (2.77) CNX6603- CNX6604- CNX6606- CNX6608- CNX6600- CNX6602- SF375CX (5.6) CNX9904- CNX9906- CNX9908- CNX9900- CNX9902- SF562CX 9/6 (4.29) 0.32 (7.92) CNLX9904- CNLX9906- CNLX9908- CNLX9900- CNLX9902- SF562CX 9/6 (4.29) (9.2) (034.6) CNLX204- CNLX206- CNLX208- CNLX200- CNLX202- SF750CX 3/ (.3) CNLX204- CNLX206- CNLX208- CNLX200- CNLX202- SF750CX 3/ (3.) (034.6) CNX606- CNX608- CNX600- CNX602- SF000CX (4.27) CNLX606- CNLX608- CNLX600- CNLX602- SF000CX (7.48) (034.6) CNLX2406- CNLX2408- CNLX2400- CNLX2402- SF500CX -/ (23.79) (034.6) Note: Caution should be exercised when selecting medium pressure nipples since two series are available: psi (034.6 bar) and psi (379 bar) **Type 304 Stainless Steel nipples available. See medium pressure tubing section for pressures at various temperatures. *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. 8-20

21 HIGH PRESSURE FITTINGS AND TUBING 8 HIGH PRESSURE FITTINGS AND TUBING Pressures to 50,000 psi (0342 bar) Since 945 Autoclave Engineers has designed and built premium quality valves, fittings and tubing. This commitment to engineering and manufacturing excellence has earned Autoclave a reputation for reliable, efficient product performance. Autoclave Engineers has long been established as the world leader in high pressure fluid handling components for the chemical/petrochemical, research, and oil and gas, waterjet, and waterblast industries. HIGH PRESSURE FITTINGS, TUBING AND NIPPLES FEATURES: Coned-and-ed Connection. Available sizes are, 5/6,, 9/6, and. Fittings manufactured from cold worked or high strength stainless steel. Tubing is manufactured from dual rated /L and 304/304L cold worked stainless steel. Operating Temperatures from -423 F (-252 C) to 200 F (649 C). Anti-vibration connection components available. Ultra-high pressure components. Autofrettaged tubing. High pressure high cycle tubing. The high and ultra-high pressure series uses Autoclave s high pressure connector. This coned-and-threaded connection provides dependable performance in gas or liquid service. SF are the industry standard for pressures to 50,000 psi (0342 bar). Utilizing Autoclave Engineers high pressure coned-and-threaded connections, these fittings are correlated with Series 30SC, 43SC, 30VM, 40VM, 60VM, 00VM, and 50V valves and Autoclave Engineers high pressure tubing. 8-2

22 8 HIGH PRESSURE FITTINGS AND TUBING Connection Components All Autoclave Engineers valves and fittings are supplied complete with appropriate glands and collars. To order these components separately, use order numbers listed. When using plug, collar is not required. Gland AGL ( ) Collar ACL ( ) Plug AP ( ) Add tube size ( ) / / To ensure proper fit use Autoclave Engineers tubing. Note: Special material glands may be supplied with four flats in place of standard hex. Example: 9/6 Gland - AGL (90) Connection Type Gland Collar Plug Connection Components (Industry Standard) F250C F375C F562C AGL( ) ACL( ) AP( ) Autoclave Engineer s high pressure fittings, and 9/6 Autoclave Engineer s high pressure fittings, and 9/6 connection components to psi (437 bar). For use with 30VM, 40VM, 60VM valves and fittings. F000C43 CGLX60 CCLX60 43CP60 Autoclave Engineer s high pressure connection components to 43,000 psi (2965 bar) for use with 30SC, 43Y valves, and fittings. F32C50 CGL50 CCL50 CP50 00CGL40 00CGL60 00CCL40 00CCL60 00CP40 00CP60 Autoclave Engineer s ultra high pressure 5/6 connection components to 50,000 psi ( 0342 bar) for use with 00VM and 50V valve and fittings. Autoclave Engineer s 00,000 psi (6895 bar) connection components utilize our 5/6 connection for and tubing. (See Note*) 8-22

23 HIGH PRESSURE FITTINGS AND TUBING 8 Dimensions - inches (mm) Catalog Number Connection Type Outside Diameter Tube Pressure Rating psi (bar)* Minimum Opening A B C D Typical E F G Block Fitting Pattern Elbow CL CL4400 CL5500 CL CL6600 CL CL CL6 F250C F32C50 F32C50 F375C F32C50 F562C F562C40 F000C43 5/6 (7.94) 9/6 (4.29) 9/6 (4.29) (436.79) 00,000 ( ) 50,000 (034.97) (436.79) 00,000 ( ) (436.79) 40,000 ( ) 43,000 ( ) 0.25 (3.8) 0.88 (4.78) (.3) 2.2 (53.85) 2.2 (53.85) 2.2 (53.85).88 (47.75).88 (47.775) 2.62 (66.55) 2.62 (66.55) 4.2 (04.65) 0.50 (2.70) (3.2) (3.2) (3.2) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.63 (5.88) 0.8 (2).9 (30.23).9 (30.23) (5.75).2 (28.45).2 (28.45) 2.06 (52.32) 0.88 (22.35).25 (3.75).88 (47.75).88 (47.75) 2.06 (52.32).75 See Fig. Tee CT CT4440 CT5550 CT CT6660 CT CT CT6 F250C F32C50 F32C50 F375C F32C50 F562C F562C40 F000C43 5/6 (7.94) 9/6 (4.29) 9/6 (4.29) (436.79) 00,000 ( ) 50,000 (034.97) (436.79) 00,000 ( ) (436.79) 40,000 ( ) 43,000 ( ) 0.25 (3.8) 0.88 (4.78) (.3).25 (3.75) 2.2 (53.85) 2.2 (53.85).56 (39.62) 2.2 (53.85) 2.2 (53.85) 2.2 (53.85) 2.62 (66.55) 2.62 (66.55) 4.2 (04.65) 0.50 (2.70) (3.2) (3.2) (3.2) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.63 (5.88) 0.8 (2).9 (30.23).9 (30.23) 0.88 (22.35).06 (26.92) 2.06 (52.32).3 (47.75).88 (33.27) 2.06 (52.32).75 See Fig. 2 *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. Note: Fittings such as 45 elbows, reducer elbows, and reducer 45 elbows are available upon request. For mounting hole option add suffix PM to catalog number, consult factory for mounting hole dimensions. Contact your local sales representative for additional information. 8-23

24 8 HIGH PRESSURE FITTINGS AND TUBING Dimensions - inches (mm) Catalog Number Connection Type Outside Diameter Tube Pressure Rating psi (bar)* Minimum Opening A B C D Typical E F G Block Fitting Pattern Cross CX CX4444 CX5555 CX CX6666 CX CX CX6 F250C F32C50 F32C50 F375C F32C50 F562C F562C40 F000C43 5/6 (7.94) 9/6 (4.29) 9/6 (4.29) (436.79) 00,000 ( ) 50,000 (034.97) (436.79) 00,000 ( ) (436.79) 40,000 ( ) 43,000 ( ) 0.25 (3.8) 0.88 (4.78) (.3).25 (3.75) 2.2 (53.85) (69.85) 2.75 (69.85) 2.62 (66.55) 2.62 (66.55) (04.65) (04.65) 0.50 (2.70) (3.2) (3.2) (3.2) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.63 (5.88) 0.8 (2).9 (30.23).9 (30.23) (5.75).06 (26.92) 2.06 (52.32).3 (33.27).3 (33.27) 2.06 (52.32).75 See Fig. 3 *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. Note: Fittings such as 45 elbows, reducer elbows, and reducer 45 elbows are available upon request. For mounting hole option add suffix PM to catalog number, consult factory for mounting hole dimensions. Contact your local sales representative for additional information. 8-24

25 HIGH PRESSURE FITTINGS AND TUBING 8 Dimensions - inches (mm) Catalog Number Connection Type Outside Diameter Tube Pressure Rating psi (bar)* Minimum Opening A B C D Typical E F G Block Fitting Pattern Straight Coupling/Union Coupling 60F UF F UF F UF F UF F UF F UF F UF F6 43UF6 F250C F32C50 (7.94) Bulkhead Coupling 60BF BF BF BF BF BF BF BF6 F32C50 F375C F32C50 F562C F562C40 F000C43 F250C F32C50 F32C50 F375C F32C50 F562C F562C40 F000C43 5/6 (7.94) 9/6 (4.29) 9/6 (4.29) 5/6 (7.94) 9/6 (4.29) 9/6 (4.29) (436.79) 00,000 (034.97) 50,000 (034.97) (436.79) 00,000 ( ) 60,0 00 (436.79) 40,000 ( ) 43,000 ( ) (436.79) 00,000 ( ) 50,000 (034.97) (436.79) 00,000 ( ) (436.79) 40,000 ( ) 43,000 ( ) 0.25 (3.8) 0.88 (4.78) (.3) 0.25 (3.8) 0.88 (4.78) (.3).2 (28.45).2 (28.45).2 ( (23.88) 2.2 (53.85) 2.2 (53.85).2 (28.45) 2.2 (53.85).69 (42.93).69 (42.93).94 (49.28) 2.62 (66.55) 2.62 (66.55) (66.55) 2.9 (55.63) 2.9 (55.63) 3.50 (88.90).88 (47.75) 3.25 (82.55) 3.25 (82.55) 2.38 (60.45) 3.25 (82.55) 2.75 (69.85) 2.75 (69.85) 3.50 (88.90) 0.50 (2.70) (3.2) (3.2) (3.46) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.50 (2.70) (3.2) (3.2) (3.46) (3.2) 0.8 (20.57) 0.8 (20.57) 0.72 (8.29) 0.63 (5.88) 0.8 (2).9 (30.23).9 (30.23) 0.63 (5.88) 0.8 (2).9 (30.23).9 (30.23) 0.50 (2.70) 0.78 (9.8).88 (47.75).88 (47.75) 2.3 (54.0) Straight Union Straight Union Straight Union Straight Union Straight Union Straight Union Straight Union Straight Union (9.65) (9.65) (9.65) (9.65) (9.65) (9.65) (9.65) 0.50 (2.70) See Fig. 4 See Fig. 5 *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. Union Couplings are designed with a removable seat insert allowing disassembly and tubing removal without the necessity of loosening other items in a line. 8-25

26 8 HIGH PRESSURE TUBING HIGH PRESSURE TUBING Pressures to 50,000 psi (0342 bar) Autoclave Engineers offers a complete selection of austenetic, cold drawn stainless steel tubing designed to match the performance standards of Autoclave valves and fittings. Autoclave high pressure tubing is manufactured specifically for high pressure applications requiring both strength and corrosion resistance. The tubing is furnished in random lengths between 20 feet (6 meters) and 26.5 feet (8.0 meters). The average is 24 feet (7.3 meters). High pressure tubing is available in five sizes and a variety of materials. Special longer lengths are available. Consult factory. INSPECTION AND TESTING Autoclave Engineer s high pressure tubing is inspected to assure freedom from seams, laps, fissures or other flaws, as well as carburization or intergranular carbide precipitation. The outside and inside diameters of the tubing are controlled within close tolerances. Sample pieces of tubing for each lot are tested to confirm mechanical properties. Hydrostatic testing is also performed on a statistical basis and is conducted at the working pressure of the tube. Autoclave will perform 00% hydrostatic testing at additional cost if desired. SPECIAL MATERIALS In addition to the type /L and 304/304L stainless steel tubing listed in this section, Autoclave has limited stock of hard-to-obtain shorter lengths of the following tubing materials in some sizes: Monel 400*, Inconel 600*, Inconel 625*, Duplex, Super Duplex, Titanium Grade 2*, Nickel 200*, Hastelloy C276* (*Trademark names) Some are available in shorter lengths only. Please consult factory for stock availability. TUBING TOLERANCE Nominal Tubing Size Tolerance/Outside Diameter inches (mm) inches (mm).248/.243 (6.30/6.7) 5/6 (7.94).30/.306 (7.87/7.77).370/.365 (9.40/9.27) 9/6 (4.29).557/.552 (4.5/4.02).995/.990 (25.27/25.4) 8-26

27 HIGH PRESSURE TUBING 8 Tube Size Inches (mm) Working Pressure psi (bar)* Catalog Number Tube Materials Fits Connection Type Outside Diameter Inside Diameter Wall Flow Area in. 2 (mm 2 ) -423 to 00 F -252 to 37.8 C 200 F 93 C 400 F 204 C 600 F C 800 F 427 C MS5-202 Stainless (See note 3) 00,000 ( ) 00,000 ( ) 96,20 ( ) 90,368 ( ) 84,420 ( ) MS5-08 SS F250C (2.) (2.) 0005 (3.23) (436.79) (436.79) 57,750 (398.66) 54,250 ( ) 50,700 ( ) MS SS (436.79) 56,800 (396.6) 5,650 (356.09) 50,700 ( ) 48,450 ( ) MS5-082 SS F32C50 5/6 (7.94) (.57) 0.25 (3.8) (.94) 50,000 (034.97) 50,000 (034.97) 44,400 ( ) 36,350 ( ) 26,750 ( ) MS5-20 Stainless (See note 3) 00,000 ( ) 00,000 ( ) 96,20 ( ) 90,368 ( ) 84,420 ( ) MS5-087 SS F375C 0.25 (3.8) 0.25 (3.8) 0.02 (7.74) (436.79) (436.79) 57,750 (398.66) 54,250 ( ) 50,700 ( ) MS SS (436.79) 56,800 ( ,650 (356.09) 50,700 ( ) 48,450 ( ) MS5-20 Stainless 00,000 ( ) 00,000 ( ) 96,20 ( ) 90,368 ( ) 84,420 ( ) MS5-083 SS F562C 9/6 (4.29) 0.88 (4.78) 0.87 (4.75) (8.06) (436.79) (436.79) 57,750 (398.66) 54,250 ( ) 50,700 ( ) MS SS (436.79) 56,800 ( ,650 (356.09) 50,700 ( ) 48,450 ( ) MS5-090 SS F562C40 9/6 (4.29) (3.96) (30.97) 40,000 ( ) 40,000 ( ) 38,500 ( ) 36,00 ( ) 33,800 ( ) MS5-209 Stainless F562C /6 (4.29) 0.32 (7.92) 0.25 (3.8) (49.03) 40,000 ( ) 40,000 ( ) 38,500 ( ) 36,00 ( ) 33,800 ( ) MS5-2 SS F000C (.3) 0.28 (7.4) 0.5 (97.42) 43,000 ( ) 43,000 ( ) 43,000 ( ) 4,380 (2853.0) 36,330 ( ) MS SS F000C (.3) 0.28 (7.4) 0.5 (97.42) 43,000 ( ) 40,600 ( ) 36,900 (2544.3) 36,300 ( ) 34,700 ( ) NOTE:. Autofrettaged tubing available (see technical Information section: Pressure Cycling for Autofrettage information) 2. For High Pressure, High Cycle (HPHC) tubing, MS5-20, MS5-202, MS5-209, and MS5-20 are available. (See Technical Information section: Pressure Cycling for additional information) 3. For 00,000 psi rating use F32C50 connection *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. All dimensions for reference only and subject to change. For prompt service, Autoclave stocks select products. Consult your local representative. 8-27

28 8 HIGH PRESSURE CONED AND THREADED NIPPLES HIGH PRESSURE CONED-AND-THREADED NIPPLES Pressures to 50,000 psi (0342 bar) For rapid system make-up, Autoclave Engineers supplies precut, conedand-threaded nipples in various sizes and lengths for Autoclave medium pressure valves and fittings. SPECIAL LENGTHS In addition to the standard lengths listed in the table below, nipples are available in any custom length. Consult factory. MATERIALS** Catalog numbers in table refer to Type Stainless steel. Note: Most items available in 304SS. Consult factory for availability. Catalog Number Nipple Length In (mm) Tube Size inches (mm) 2.75 (69.85) 4.00 (0.60) 6.00 (52.40) 8.00 (203.20) 0.00 (254.00) (304.80) Fits Connection Type O.D. I.D. Working Pressure* at 00 F (37.8 ) psi (bar)* CN4402- CN4403- CN4404- CN4406- CN4408- CN4400- CN4402- F250C CN5504- CN5506- CN5508- CN5500- CN5502- F32C50 CN6603- CN6604- CN6606- CN6608- CN6600- CN6602- F375C CN9904- CN9906- CN9908- CN9900- CN9902- F562C 40CN CN CN606-40CN CN608-40CN CN600-40CN CN602- F562C40 F000C43 9/6 (4.29) 9/6 (4.29) 3/4 3/ (2.77) (5.6) 0.32 (7.92) (9.2) (.3) 0.56 (3.) (034.6) (034.6) NOTE: See High pressure tubing section for pressure ratings at various temperatures. Material in table is Stainless steel *Maximum pressure rating is based on the lowest rating of any component. Actual working pressure may be determined by tubing pressure rating, if lower. apply to all products and services sold. 8-28

29 A-LOCK INSTRUMENTATION FITTINGS 8 A-LOCK Active Service can supply the full range of A-lock Instrumentation Tube Fittings from Parker. Parker A-LOK Fittings has been specifically designed for use on instrumentation, process and control systems, analysers and environmental equipment employed in chemical, petroleum, power generating and pulp and paper plants. Those fittings are designed as leak-free connections. Single and two ferrule fittings are manufac-tured to the highest quality standards and are available in a broad range of sizes, materials and configurations. MATERIALS Parker A-LOK fittings are available as standard in Heat Code Traceable, stainless steel. Other standard materials include steel, brass, aluminum, nickel-copper, Hastelloy C, Alloy 600, Titanium, 6Mo, Incoloy 625 and 825. Straight fittings are machined from cold finished bar stock and shaped bodies are machined from close grain forgings. The raw materials used fully conform to the chemical require-ments listed in Specification Table. For nuclear and other critical applications, stainless steel CPI /A-LOK fittings are readily available with documented heat code traceability. Parker A-LOK tube fittings part numbers are constructed from symbols that identify the size and style of the fitting and material used. Example: The part number shown bove is for a Parker A-LOK stainless steel male connector for /2 O.D. tube ( 8) and male pipe thread ( 4). Type: A letter or combination of letters and numbers are used to designate the type of fitting. See the visual index for fitting types. Material: Basic material type (B = brass, SS or = stainless steel, type ; S = steel; A = aluminum; M = Alloy 400; HC = Hastelloy C-276 ; IN = Alloy 600; SS20 = Carpenter 20 ; 6MO = 6Mo; 625 = 625; 825 = 825; T = Titanium). Parker CPI /A-LOK Tube fittings, for special applica-tions, can be furnished in almost any material suitable for machining. Types: N = NPT ANSI B.20. K = BSP Taper BS2, ISO7/ R = BSPP BS2779, ISO 228/+2, DIN 3852 FORM A BR = BSPP BS2779, ISO 228/+2, DIN 3852 FORM B M = Metric ISO R-ED = BSPP BS2779, ISO 228/+2, DIN

30 8 8-30