Double throttle/check valve type Z2FS6
|
|
- Beverly Hillary Randall
- 5 years ago
- Views:
Transcription
1 Duble thrttle/check valve type ZF N up t,5 Ma up t 0 dm /min WK LICION hrttle/check valve type ZF... is used t cntrl main flw rate (r pilt flw rate) in ne directin f flw and t allw free flw in the ppsite directin. he valve may be designed as duble versin (twin versin - valve functin is realized in tw prts and ) r single versin (valve functin is realized in ne prt r ). he valve is applied t vertical stack munting (sandwich plate) - generally is fitted between subplate and directinal valve f the same nminal size and in this case is used t limit main flw rate (t cntrl the speed f a receiver mvement). Fr directinal valves pilt perated the valve is installed as a pilt chke adjuster (t limit pilt flw rate). In this case it is fitted between the main and the pilt valve. DECRIION OF OERION ZF - 4/ 4 5 Hydraulic fluid frm directinal valve via prt (r ) flws t receiver thrugh thrttling slt (). t the same time the fluid under perating pressure acts via line n spring (4) laded side f spl (). he spl () is thus hld in the thrttle psitin by bth spring (4) and hydrstatic frce.. Hydraulic fluid flwing back frm a receiver thrugh prt (r ) shifts the spl () in the directin f adjustment and allws the fluid t flw freely (the valve perates as a check valve). hrttle rate (vlume f fluid flw) can be adjusted by means f adjustment screw (). Depending n the way the valve is fitted in relatin t the seal ring plate (5), thrttling effect can be achieved either in the supply f a receiver (ptin shwn n the drawing) r drain (by rtating the valve abut the lngitudinal hrizntal axis by 80 ). ype ZF - - WK
2 ECHNICL D Hydraulic fluid Required filtr f ltrat atin Recmmended filtratin Nminal fluid viscsity Viscsity range Fluid temperature range (in a tank) mbient temperature range Maxim imum perat ating pressure Crac acking pressure 0,0 Ma Maxim imum flw f 0 dm / min m Weight CHEME Hydraulic schemes f valves type ZF F... mineral il up t t µm up t 0 µm 7 mm /s at temperature 55 C,8 up t 80 mm /s recmmended max -0 C up t +70 C,,5 Ma 0,9 kg 40 C up t 55 C -0 C up t +70 C supply thrttling duble versin ZF.../... drain thrttling supply thrttling single versin ZF.../... drain thrttling supply thrttling single versin ZF.../... drain thrttling WK ype ZF
3 OVERLL ND CONNECION DIMENION duble versin ZF.../... (max),4 strke,4 strke ,7 7 4, 7,5,5 O 5,4-4 hles,5 X 5 85 (max) (min) 9 8 M5 depth 0-4 hles O7, (max) - 4hles (,,,) 9 0, 7,8 40,5 4 (min) r 0,0/00 mm 0, 0,75 5,95,5,55,75,5, - Overall dimensins fr the valve versin ZF.../ with thrttling effect in prts, - djusting element (hand knb); rtatin t the right - increasing flw thrttling effect; rtatin t the left - decreasing flw thrttling effect 4 - djusting element (set screw) 5 - Overall dimensins fr the valve versin ZF.../ with thrttling effect in prts, - eal ring plate - enables t arrange thrttling effect in the supply r in the drain by changing the way in which the valve is fitted in relatin t the plate - rtatin the valve abut the axis X by 80 (see examples n page 5) 7 - eal -ring 9, x,8-4 pcs/kit (,,, ) 8 - Munting hles cnfiguratin f a subplate in accrdance with the standards listed belw: CEO R H - symbl CEO (nminal size CEO 0) IO symbl IO fixing screws M5 x L* L pcs/kit in accrdance with N - EN IO 47 tightening trque Md = 9 Nm 9 - Required surface finish f a subplate NOE: (*) - Required length f the screws L is related t type and the number f hydraulic cmpnents sandwich fitted ype ZF - - WK
4 OVERLL ND CONNECION DIMENION single versins: ZF.../...; ZF.../... 7,4 (strke) 9 (max) 0,5,4 (strke) 90,5 0,5 9 (max) ,5 8, , 45 (min) 0 7 M5 depth 0-4 hles O7, (max) - 4 hles (,,,) 0 (max) 5 O 8 5,4-4 hles,5 9,4 (strke) 0, 7,8 40,5 4 (min) r 0,0/00 mm 0, 0,75 5,95,5,55 40,5 5,75,5,5 X, - Overall dimensins fr the valve versin ZF /... with thrttling effect in prt,4 - Overall dimensins fr the valve versin ZF /... with thrttling effect in prt 5 - Overall dimensins fr the valve versin ZF /... with thrttling effect in prt (apply als ZF /... with thrttling effect in prt ) - djusting element (hand knb); rtatin t the right - increasing flw thrttling effect; rtatin t the left - decreasing flw thrttling effect 7 - djusting element (set screw) 8 - eal ring plate - enables t arrange thrttling effect in the supply r in the drain by changing the way in which the valve is fitted in relatin t the plate - rtatin the valve abut the axis X by 80 (see examples n page 5) 9 - eal -ring 9, x,8-4 pcs/kit (,,, ) 0 - Munting hles cnfiguratin f a subplate in accrdance with the standards listed belw: CEO R H - symbl CEO (nminal size CEO 0) IO symbl IO fixing screws M5 x L* L pcs/kit in accrdance with N - EN IO 47 tightening trque Md = 9 Nm - Required surface finish f a subplate NOE: (*) - Required length f the screws L is related t type and the number f hydraulic cmpnents sandwich fitted WK ype ZF
5 ERFORMNCE CURVE measured at viscsity ν = 4 mm /s and temperature t = 50 C Characteristic curves p(q) fr the valve type ZF F... fr varius thrttle settings Flw resistance curve p(q) fr the check valve - thrttle clsed p [Ma Ma] 0,0 8,0,0 4,0,0 thrttle setting [adjustment screw turns] 7 5 4,0,5,5 p [Ma Ma],5 0, Q [dm /mi / min],0 0,5 0, 0, Q [dm /mi / min] EXMLE OF LICION IN HYDRULIC YEM Flw thrttling in the supply f the receiver (actuatr) Flw thrttling in the drain f the receiver (actuatr) - valve fitted in rtated psitin by 80 ZF - 4X ZF - 4X ype ZF WK
6 HOW O ORDER ZF Nminal size (N) N = * eries number (40-49) - cnnectin and installatin dimensins unchanged = 4X series 4 = 4 hrttling lcatin (hydraulic schemes n page ) thrttle valves n the side f prts and = n cde thrttle valve n the side f prt = thrttle valve n the side f prt = etting element hand knb = set screw with internal hexagn = ealing NR (fr fluids n mineral il base) FKM (fr fluids n phsphate ester base) = n cde = V Further requirements in clear text (t be agreed with the manufacturer) NOE: he thrttle/check valve shuld be rdered accrding t the abve cding. he symbls in bld are the preferred versins available in shrt delivery time. Cding example: ZF 4/ ULE ND FIXING CREW ubplates must be rdered accrding t catalgue sheet WK ubplate symbls: G 4/0 - threaded cnnectins G /4 G 4/0 - threaded cnnectins G /8 G 50/0 - threaded cnnectins G / G 4/0 - threaded cnnectins M4 x,5 G 4/0 - threaded cnnectins M x,5 ubplates and screws fixing the thrttle/check valve M5 x L* L - 0, 0,9-4 pcs/kit in accrdance with N - EN IO 47 must be rdered separately. ightening trque Md = 9 Nm NOE: (*) - Required length f the screws L is related t type and the number f hydraulic cmpnents sandwich fitted. he subp ubplate symbl in bld b is s the t preferred versin availab able in shrt delivery time. t ONR Wadwice.. ul. Wjska lskieg Wadwice tel fax WK ype ZF
Double throttle/check valve type Z2FS10
Duble thrttle/check valve type Z2FS0 NS0 up t,5 Ma up t dm /min WK 450 2 02.200 LICION hrttle/check valve type Z2FS0 0... is used t cntrl main flw rate (r pilt flw rate) in ne directin f flw and t allw
More informationPressure relief valve, pilot operated, sandwich plate type UZPR10
ressure relief valve, pilot operated, sandwich plate type UZR0 NS0 up to,5 Ma up to 00 dm /min WK 497 00.0 LICION ressure relief valve, pilot operated, sandwich plate design type UZR0 0 is used to limit
More informationCONTENTS: Page 1/30 2/30 3/30 4/30 5/30 6/30 7/30 8/30 9/30 10/30 11/30 12/30 13/30 14/30 15/30 16/30 17/30 18/30&19/30 20/30&21/30 22/30 23/30
FLOW VALVES CONTENTS: Page Check valves: KO-...... CV08-2A...... CV08-2B...... CV10-2B...... Pilt perated check valves: KOHU...-...... KOHU...-S... KOHU...-E...... KOHU...-SA... KOHU16P... CPV08-3A......
More informationDouble throttle/check valve type Z2FS16
Double throttle/check valve type Z2FS16 NS16 up to 5 MPa up to 250 D SHEE - OPERION MNUL dm /min WK 42 690 06.2015 PPLICION hrottle/check valve type Z2FS16 16... is used for setting the size of the main
More information6-way section directional valves type 6URRE6
way section directional valve type URRE NS up to 5 Ma 80 dm /min D SHEE SERVICE MNU NUL WK 40 00 0.009 LICION way section directional valves type URRE are used to change direction of fluid flow in hydraulic
More information6-way section directional valves type 6URRE6 consist
way section directional valve type URRE NS up to 5 Ma up to 80 D SHEE SERVICE MNU NUL dm /min WK 0 00 0.0 LICION way section directional valves type URRE are used to change direction of fluid flow in hydraulic
More informationSEAT VALVES FEATURES. Cracking pressure depends on the area ratio of individual combination of spool and sleeve.
SET VLVES FETURES Veljan Seat Valves are bdy type munting series VD4S and cartridge units series VCR. The cmplete range f cartridges - bdy munted VD4S and manifld munted VCR are sized frm /8 t 1 1/2 permit
More informationDirectional control valves hydraulically operated type WHG6/WHP6
LICION Directional control valves hydraulically operated type WHG6/WH6 Directional control valves hydraulically operated type WHG6, WH6 are intended for change in direction of fluid flow in a hydraulic
More informationDirectional spool valve type WH16 hydraulically operated
Directional valve type WH16 hydraulically operated NS16 up to 5 MPa up to 240 dm /min WK 499 501 04.2009 PPLICION Directional valves type WH16 are intended for change in direction of fluid flow in a hydraulic
More informationPilot operated pressure relief valve type DB 3
ilot operated pressure relief valve type DB NS, 0, 0 up to 5 Ma up to 650 dm /min DAA SHEE - SERVICE MANUA NUAL WK 0 07.011 ALICAION ressure relief valves type DB... serve to limit pressure in a hydraulic
More informationX 7 WK Electrically operated directional spool valve with a soft-shift function type WE6P NUAL NS6. up to 35 MPa up to 80 dm APPLICATION
Electrically operated directional spool valve with a soft-shift function type WE6 NS6 up to 35 Ma up to 80 dm 3/min D SHEE - OER RION MNU NUL WK 430 450 04.016 LICION Electrically operated directional
More information2-WAY FLOW CONTROL VALVE TYPE UDRD6
-WY FLOW CONTROL VLVE TYPE UDRD6 WK 0 00 NS6 up to 31,5 MPa up to 3 dm 3 /min WK 0 00 -way flow control valve type UDRD6 serves to control fluid flow rate independently of pressure and temperature in direction
More informationHydraulic pumps and hydraulic power packs type Z (gear pumps)
Hydraulic pumps and hydraulic pwer packs type Z (gear pumps) Operating pressure p max = 210 bar Delivery flw Q max = 135 lpm (150 rpm) Gem. displacement V g max = 87.8 cm 3 /rev. 1. General infrmatin Hydraulic
More informationPower pack type UHMZ 25
ower pack type UHMZ 25 p max = 20 Ma Q = 10 max cm 3/rev WK 560 503 04.2008 LICION ower pack is intended to supply hydraulic system with hydraulic fluid (oil) according to the required parameters (pressure
More information2/2 - way cartridge valve type URZS/S
/ - way cartridge valve type URZS/S NS, 0, 50 up to MPa up to 00 dm /min DT SHEET - SERVICE MNU NUL WK 1 0 07.01 PPLICTIN / way cartridge valve type URZS S can be used in hydraulic systems as a pilot operated
More informationWK Proportional pressure reducing valve, cartridge design type WZRS6. NS 6 up to 5 MPa up to 40. dm /min APPLICATION DESCRIPTION OF OPERATION
Proportional pressure reducing valve, cartridge design type WZRS6 NS 6 up to 5 MPa up to 40 dm /min WK 499 979 04.201 PPLICTIN Proportional pressure reducing valve, electrically operated type WZRS6 is
More information/2017. Flexline rapid clamping systems with drive chain clamping element, T-slot and adjustment track
Traveling unit chain (adjustment track) in 3 lengths s in varius designs Mtr Advantages 8 different clamping elements 4 different T-slts 3 different adjustment tracks drive mtr and die mnitr attachable
More informationComplete Solutions for Industrial Valves
Butterfly Valves Cmplete Slutins fr Industrial Valves NEWAY VALVE Cat.n.:E-BFV-2006 T Series: Sft Seated Cncentric Butterfly Valve Figure Numbers 12 TC 1 W G WCB 338 Neway figure numbers are designed t
More information2/2- way directional valve type URZS40 Cover of directional valve type ULZS40
2/2- way directional valve type URZS40 Cover of directional valve type ULZS40 NS40 up to 42 MPa up to 1600 DT SHEET - SERVICE MNU NUL dm /min WK 421 750 0.201 PPLICTIN 2-way, 2-position directional valve
More informationD-Sub adaptor Cable clamps for metric cable entries Cable clamps for PG cable entries Further Accessories
Cntents Accessries Page D-Sub adaptr............................................... 40.02 Han Split Hd.............................................. 40.04 Cable clamps fr metric cable entries..............................
More informationMotor pumps and hydraulic units type R and RG
Mtr pumps hydraulic units type R RG Pump units with radial-pistn pumps ace. t D 6010 ready fr installatin peratin Operating pressure p max = 700 bar Delivery flw Q max = 91.2 lpm (at 1450 rpm) Gemetric
More informationRC Series. Rodless Air Cylinder Contents
Rdless Air Cylinder D RC 1Z 1X OS- Cntents Features...168 Ordering Infrmatin...169 Specificatins, Weights...170 Frce Data...170 ad and ment Data...171 Cushin Data...172 rting Cnfiguratins/Cylinder Selectin...173
More informationINSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS
INSTALLATION INSTRUCTIONS FOR PART #20001 FORCED INDUCTION BOOST COOLER WATER / METHANOL INJECTION SYSTEMS Parts UHO (Ultra High Output) Pump 3 Qt Reservir 10 ft High Pressure Tubing 3ft Wire Lm 18 1/8
More informationINSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL
Kit Cntents INSTALLATION INSTRUCTIONS FOR PART #47002 WATER / METHANOL INJECTION SYSTEM UNIVERSAL TURBO DIESEL Parts UHO Pump (Ultra High Output) 3 Qt Reservir 10 ft High Pressure Tubing 3 ft Black Wire
More informationGeneral Faucet Installation Instructions
General Faucet Installatin Instructins Step 1: Psitin the Faucet Begin installing yur faucet by placing the gasket and faucet in psitin n the sink. (Diagram A) Frm under the sink, thread the plastic munting
More informationINSTALLATION INSTRUCTIONS FOR PART #20010 RT1/RT2/DOM WATER / METHANOL INJECTION SYSTEMS
Kit Cntents INSTALLATION INSTRUCTIONS FOR PART #20010 RT1/RT2/DOM WATER / METHANOL INJECTION SYSTEMS Parts UHO Pump (Special High Output) 3 Qt Reservir 10 Ft High Pressure Tubing 3 Ft Wire Lm 18 1/8 Silicne
More informationPneumatik Training Course Hafner-Pneumatik
Pneumatik Training Curse Hafner-Pneumatik Chapter 1: Basic Cncepts f Pneumatics Right f authrship: The cntent f the training (wrding, drawings, pictures) are wned by the authr. Any utilizatin except fr
More informationPlanar Blind-Mate Connectors DC to 40 GHz
Planar Blind-Mate Cnnectrs DC t 40 GHz Mdels 7008, 7034, 7035, 7035R & 7041 Threadless Cnnectr System / Space Saving / L ng Life Features Threadless Cnnectr Mating - This blind-mate cnnectr series prvides
More informationRejuvenation Instructions
Rejuvenatin Instructins #521 200A Elbws UPR This NRI cvers the fllwing: Hw t prepare 200amp pre-mlded elbws fr injectin. Hw t install and re-infrce an injectin elbw. Hw t size an injectin elbw t match
More informationOverall dimensions... page 34 Efficiency... page 36 Options... page 37. SJ Series screw jacks - travelling nut (Mod.B) - spare parts...
Screw jacks INDEX 1. General Screw jacks verview... page Manufacturing features... page Materials and cmpnents... page 3 Acme screw jacks summary... page 4 Ball screw jacks summary... page 5 Mdels... page
More informationLinear actuators CLA Series and CLB Series
Linear actuatrs CLA Series and CLB Series CLA-CLB Series, size 0-40 CLA-CLB Series, size 50 102 Linear actuatrs CLA Series and CLB Series.1 MANUFACTURING FEATURES Input drive: wrm gear - precisin helical
More informationMotorized Pulley 165E, Ø 165 mm
Mtrized Pulley 165E, Ø 165 mm Mtrized Pulley 165E, with machined helical gear b, perfrms an efficiency, in a cmpact diameter f 165 mm nly. With a min RL f 400 mm and and pwers ranging frm 0.11kW t 1.5kW
More informationFuel Meter Model FM 200
Fuel Meter Mdel FM 200 WILLIAM C. KIELING, Assistant Prfessr f Mechanical Engineering, Cllege f Engineering, University f Washingtn The mtr benefits fuel meter is an Accurate, _. wide flw range fuel-measuring
More informationABTQ-103 rev 01 Last review:
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR ABTECH PCS Cntrl Statin Purpse f Instructins Wrking in hazardus areas, the safety f persnnel and plant depends n cmplying with all relevant safety
More informationXJ 4-Link Rear Long Arm Instructions
Parts Checklist: Instructins Irn Rck Off Rad Decal - (2) Rck-Link Decal 13287 - (2) irnrckffrad.cm Decal - (1) Crssmember - 991162 - (1) Shck crssmember - 91173 - (1) Shck crssmember spacer - 91178 - (2)
More informationAN / ANR Series Characteristic Highlights
AN / ANR Series Characteristic Highlights Planet gears rtate n slid uncaged needle rller bearings fr increased stiffness and the maximum number f cntact pints. Hardened thrust washers allw the precise
More informationTrainingssystem Aluminium design
Didactic fr Cntrl technlgy in vcatinals IDV Engineers-Office de Vries Trainingssystem Aluminium design Pneumatics / Electrpneumatics / Prprtinalpneumatics Technical changes reserved P/EP 06.12 The IDV
More informationAnnex to the EU Type-Examination Certificate No. EU-BD 758 of
Annex t the EU Type-Examinatin Certificate N. EU-BD 758 f 2016-04-01 1 Scpe f applicatin 1.1 Use as braking device part f the the prtectin device against verspeed fr the car mving in upwards directin permissible
More information3-way flow control valve type UDUE10 is intended for
3-way flow control valve type UDUE10 NS10 up to 35 Ma up to 50 dm 3/min DT SHEET - OER RTION MNU NUL WK 422 620 06.2014 LICTION 3-way flow control valve type UDUE10 is intended for independent from pressure
More informationIMPORTANT SAFETY INSTRUCTIONS
PN: ISDUALSWG Rev: D OWNER S MANUAL INSTALLATION, OPERATION, & PARTS DUAL SUBMERGED SUCTION OUTLET SET [Cmmnly called main drains] Basic safety precautins shuld always be fllwed, including the fllwing:
More informationDirectional cartridge valve type. tight on both sides type 2URED6
Directional cartridge valve tight on both sides type URED6 NS 6 up to 31,5 MPa up to 5 DATA SHEET - SERVICE MANUA NUAL 3 dm /min WK 493 130 07.011 APPLICATION Directional cartridge valve type URED6 is
More informationDirect operated pressure relief valve type DBD
Direct operated pressure relief valve type DBD NS,, up to 3 Ma up to 50 DAA SHEE - OERAION MANUAL 3 dm /min WK 450.5 ALICAION A direct operated pressure relief valve type DBD is designed to limit maximum
More informationCHAPTER 4 Chilled beam OKNI 450 & 600
CHAPTER 4 Chilled beam OKNI 450 & 600 The Slid Air chilled beams OKNI 450 and 600 are active chilled beams fr use in suspended ceilings. Air-utflw directin: 2-sided, Primary air cnnectin: side r tp Available
More informationTHE 12" ACME-GRIDLEY SINGLE SPINDLE CHUCKING MACHINE
THE 12" ACME-GRIDLEY SINGLE SPINDLE CHUCKING MACHINE * THE 12" ACME-GRIDLEY The design, cnstructin and perfrmance f this new machine present a radical departure frm any single spindle machines heretfre
More informationINSTALLATION INSTRUCTIONS FOR PART #20140 STAGE 3 N54 BMW BOOST COOLER WATER/METHANOL INJECTION SYSTEM
INSTALLATION INSTRUCTIONS FOR PART #20140 STAGE 3 N54 BMW BOOST COOLER WATER/METHANOL INJECTION SYSTEM Parts List UHO (Special High Output) Pump 2.5 gal Reservir 20 ft. 1/4 OD Tubing 3ft.Black Wire Lm
More informationSignature Series Vehicles C6 A6 Installation Guidelines
STāSIS Engineering Signature Series Vehicles C6 A6 Installatin Guidelines Table f Cntents Page Trque specs 3 Suspensin Frnt and Rear Suspensin, Turing 4 Braking Optinal Brake Kit 16 Bed-In Prcedure 21
More informationINSTRUCTION MANUAL 9500/12000 LBS. D9500SC / D9500SR / D9500SRD D12000SC / D12000SR / D12000SRD MODEL:
INSTRUCTION MANUAL 95/ LBS. WINCH MODEL: D95SC / D95SR / D95SRD DSC / DSR / DSRD www.aprveatv.cm 95/ LBS. 95/ LBS. D95SC / DSC D95SR / DSR D95SRD / DSRD As yu read these instructins, yu will see WARNINGS
More informationINSTRUCTION FOR INSTALLATION AND INJECTION HEAD DN PN
INSTRUCTION FOR INSTALLATION AND INJECTION HEAD DN 15 - PN - VHF PM - 218/17/03/GB The instructins fr installatin and service f injectin head are binding fr users t ensure prper functin f injectin head.
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS DVP SERIES
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS DVP SERIES GENERAL INFRMATINS / INSTRUCTINS This variable displacement piston pump has dual flows and an additional piggybacked gear pump for auxiliary service,
More informationTECHNICAL SPECIFICATION. SPC-4T Stirling Process Cryogenerator
TECHNICAL SPECIFICATION SPC-4T Stirling Prcess Crygeneratr Reference 80 8044_00 Issue Date April 20, 2016 Stirling Crygenics is a registered trade name f DH Industries BV Fr mre infrmatin n the Stirling
More informationDirectional spool valve type WMM 16 hand lever operated
Directional spool valve type WMM 16 hand lever operated Size 16 35 MPa 180 dm 3 /min WK 450 209 04.2001r. Directional spool valves are used to control the direction of fluid flow and thus the direction
More informationInstallation instructions: 13 Pin Electrical system for towing hitch
General data Part number Westfalia Vehicle Manufacturer Vehicle 321 538 300 153 ZGB 1T0 055 204 Vlkswagen Turan MY 2003> 321 538 391 105-005 - 33/07 Imprtant ntes Read the installatin manual prir t starting
More informationC.O.I.S. Technical Data Sheet CAD Operation Installation Specification
Literature C.O.I.S. TD CSI 3 part 200 series dcuments 400 series dcuments 600 series dcuments C.O.I.S. Technical Data Sheet CAD Operatin Installatin Specificatin Dcument #409 Issued 08-2007 MODEL 100SS-R
More informationMotorized Pulley 138E, Ø 138 mm
Mtrized Pulley 138E, Ø 138 mm Mtrized Pulley 138E, with machined helical gear b, perfrms an efficiency, in a cmpact diameter f 138 mm nly. With a min RL f 300 mm and and pwers ranging frm 0.10 t 075kW
More informationCompact Safedrive with built-in Safety Brake. innovative drive systems for industrial doors. Variable Speed Safedrive with built-in Safety Brake
GfA-ELEKTROMATEN Chain Drive Operatr fr Rller Shutter Cmpact Safedrive with built-in Safety Brake Safedrive with built-in Safety Brake Chain Drive with separate Safety Brake Fire Shutter Operatr innvative
More informationEDBRO RIGID INCLINOMETER
EDBRO RIGID INCLINOMETER RINC01 Installatin & Operating Instructins E5542 rev 1 (June 2010) Edbr PLC Nelsn Street, Bltn BL3 2JJ UK Tel: +44 (0) 120 4528888 Fax: +44 (0) 120 4531957 E-mail: pstmaster@edbr.cm
More informationElectrically controlled directional control poppet valve type UREZ6
LICION Electriclly controlled directionl control poppet vlve type UREZ6 is intended for chnging the direction of hydrulic fluid flow in system, which llows for chnge of the direction of the receiver motion
More informationComplete Solutions for Industrial Valves NEWAY VALVE
Butterfly Valves Cmplete Slutins fr Industrial Valves NEWAY VAVE Cat.n.:E-BFV-2006 TC Series: Metal Seated Triple Offset Butterfly Valve Figure Numbers 12 TC 1 W G WCB 338 Neway figure numbers are designed
More informationCHAPTER 3 Chilled beam OKNI 300 & 400
CHAPTER 3 Chilled beam OKNI 300 & 400 The Slid Air chilled beams OKNI 300 and 400 are active chilled beams fr use in suspended ceilings. Air-utflw directin: 2-sided Primary air cnnectin: side r tp Available
More informationProportional pressure reducing valve type 3WZCDE6 is a
LICION roportionl pressure reducing vlve type 3WZCDE6 3-wy electriclly controlled, proportionl pressure reducing vlve type 3WZCDE6 is used for reducing pressure in hydrulic system, in continuous wy, s
More informationSolvent Filter. What is a Solvent Trap, Solvent Recycler or Solvent Filter? Why use a solvent filter? Why is the HIT Solvent Filter better?
Slvent Filter What is a Slvent Trap, Slvent Recycler r Slvent Filter? It is a device attached t the end f a threaded barrel that cllects all f the slvent and debris as it is cleaned frm the barrel and
More informationPV-70 Remotely Operated Cryogenic Globe Valve Installation, Operation, and Maintenance Manual
PV-70 Remtely Operated Crygenic Glbe Valve Installatin, Operatin, and NOTIC: Printed cpies are uncntrlled. Page 1 f 12 TABL OF CONTNTS 1. INSTALLATION... 2 2. OPRATION... 4 3. MAINTNANC... 4 4. PRSSUR
More informationGB. LDM valves with electromechanic actuators -1-
0-02. 09. 6.GB LDM valves with electrmechanic actuatrs -- Kv cefficient calculatin Calculatin itself is carried ut with respect t cnditins f regulating circuit and perating medium accrding t equatins mentined
More informationScrew jacks with travelling ball nut (Mod.B)
Screw jacks with travelling ball nut (Md.B).1 MA Series Md.B - STRUCTURAL ELEMENTS 1 2 11 16 17 1 5 4 19 15 6 18 9 20 1 10 14 8 7 12 1 - ball screw in quenched and tempered ally steel 11 - lw cver 2 -
More informationMG1 TM COMPACT MAGNETIC SYSTEM FILTER
MG1 TM COMPACT MAGNETIC SYSTEM FILTER CT3070.0_00 EN Nvember 2015 Patent applicatin n. 202015000064159 Super cmpact Retains all impurities Fights crrsin Increases the lifespan f the biler Maintains ptimum
More informationINSTALLATION INSTRUCTIONS FOR PART #50015 DIESEL MPG-MAX WATER / METHANOL INJECTION SYSTEM 6.0L/6.4L/6.7L POWERSTROKE DIESEL
Kit Cntents INSTALLATION INSTRUCTIONS FOR PART #50015 DIESEL MPG-MAX WATER / METHANOL INJECTION SYSTEM 6.0L/6.4L/6.7L POWERSTROKE DIESEL Parts 7 Galln Reservir UHO Pump (Ultra High Output) 25 ft High Pressure
More informationMG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER
MG1 TM MAGNETIC SUPER-COMPACT SYSTEM FILTER CT3070.0_01 EN June 2016 Patent applicatin n. 202015000064159 Super cmpact Retains all impurities Fights crrsin Increases the lifespan f the biler Maintains
More informationTrouble Shooting Guide for AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves)
Truble Shting Guide fr AFVK-SP Series Valve Kit (AF-4000 Series Gas Valves) AFVK-SP, AFVK-SP-H/L, AFVK-SP-MH/L AFVK-SP Series Valve Kit Truble Shting Guide (AF-4000 Series) TABLE OF CONTENTS General Infrmatin
More informationINSTALLATION & USER S GUIDE
REKLUSE MOTOR SPORTS The Rekluse EXP Clutch OVERVIEW INSTALLATION & USER S GUIDE Dc ID: 191-6000 Manual Revisin: 050514 This kit will replace sme f the OEM frictins and drive plates with the EXP disk.
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS DVP SERIES
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS DVP SERIES GENERAL INFRMATINS / INSTRUCTINS This variable displacement piston pump has dual flow and an additional piggybacked gear pump for auxiliary service, open
More informationBoston Gear WOR Series Mechanical Overload Release Clutches for the Water and Wastewater Industry
Bstn Gear WOR Series Mechanical Overlad Release Clutches fr the Water and Wastewater Industry P-303-BG Installatin and Operatin WOR Series Mdel H1900 a divisin f Altra Industrial Mtin Cntents I. Intrductin.......................
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS
VARIABLE DISPLACEMENT AXIAL PISTN PUMPS INDEX Section Page FEATURES... 3 GENERAL INFRMATIN / INSTRUCTINS... 4 MUNTING PSITINS... 5 DISPLACEMENTS AND WRKING PRESSURES RANGE... 6 TECHNICAL DATA...7 DISPLACEMENT
More informationSUPRApak L Series Filter Systems SUPRApak Filtration For Large Scale Depth Filtration
SUPRpak L Series Filter Systems SUPRpak Filtratin Fr Large Scale Depth Filtratin FBSPKLSCRENb Technical Infrmatin SUPRpak L Series-S filtratin units are turn-key systems designed fr use with SUPRpak L
More informationThe E-Brake. Content: Basic principle The advantages The models The features
The E-Brake Cntent: Basic principle The advantages The mdels The features Belt & Pully drive Basic principle Serv electrnic Return spring O-Frame cnstructin Hw it wrks The Advantages Basic principle E-Brake
More informationPILOT OPERATED PRESSURE REDUCING VALVE TYPE DR
PILOT OPERATED PRESSURE REDUCING VALVE TYPE DR Size, 20, 0 up to 1,5 MPa up to 00 dm /min. WK 495 690 04.1999r. Pilot operated pressure reducing valves type DR are used to reduce pressure in hydraulic
More informationDraft ADEM Guidance Proposed Additions to the Alabama UST Regulations
Draft ADEM Guidance Prpsed Additins t the Alabama UST Regulatins Yu may have heard abut upcming changes t the undergrund strage tank regulatins (UST regulatins). On Octber 13, 2015 EPA finalized the first
More informationMotorized Pulley 320L, 320M & 320H, Ø in. (321 mm)
Mtrized Pulley 320L, 320M & 320H, Ø 12.6 in. (321 mm) Our 12.6 diameter Mtrized Pulley range fers three different perfrmance levels fr BULK applicatins: - L fr Light duty - M fr Medium duty - H fr Heavy
More informationLN products. Contents. LN Cabinets for LAN applications. LN Enclosures. LN Open Racks
LN prducts LN Cabinets fr LAN applicatins The LN cabinets is lightweight and a gd chice fr slutins where the required lad-bearing capacity is nt great and the applicatins are installed indrs. The cabinets
More informationVEHICLE ACTIVATED SPEED LIMIT SIGNS
VEHICLE ACTIVATED SPEED LIMIT SIGNS TRS-VASL VEHICLE ACTIVATED SPEED LIMIT SIGNS Vehicle Activated Speed Limit (VASL) signs measure the speed f appraching vehicles. If the speed f the vehicle is higher
More informationOperator s Manual with Maintenance Information. First Edition Third Printing Part No
Operatr s Manual with Maintenance Infrmatin First Editin Third Printing Part N. 72146 Operatr's Manual First Editin Third Printing Imprtant Read, understand and bey these safety rules and perating instructins
More informationMag-Nus2 MAGNETIC, SELF CLEANING, DIRT SEPARATOR
Mag-Nus2 MAGNETIC, SELF CLEANING, DIRT SEPARATOR CT3548.0_00 EN Octber 2017 Retains all impurities Self-cleaning Excellent hydraulic prperties Can be munted n vertical, hrizntal and diagnal piping Increases
More informationPosition transmitters SMAT-8E, for T-slot
Key features Design The SMAT-8E is a sturdy magnetic measuring system with a 50 mm range. It prvides a standardised analgue current and vltage signal via an M8x1 plug cnnectin, regardless f the drive used.
More informationIC-80-F. Tech Spec 2-WHEEL DRIVE. * Capacity on outriggers...18,000 lbs. * Pick and carry capacity up to...11,700 lbs. * Height * Width...
Tech Spec IC-8-F 2-WHEE DRIVE * Capacity n utriggers...18, lbs. * Pick and carry capacity up t...11,7 lbs. * Height...7 3 * Width...6 6 * Sheave height...up t 46 * Hrizntal Reach...up t 4 * Tight turning
More informationVolume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE. by BLUEROCK Tools
Vlume 1.1 OPERATIONAL MANUAL MODEL: CG-211Y PIPE TORCH/BURNER MACHINE by BLUEROCK Tls UNPACKING THE ITEM Cautin: This machine is packed tgether with items that may be sharp, ily and verly heavy bjects.
More informationInstallation Instructions
Part Number: CPECOMZR007A00 SMALL PACKAGED PRODUCT (3 TON UNITS) VERTICAL ECONOMIZER ACCESSORY EXCLUDING 3 TON 14 SEER HP AND DUAL FUEL MODELS Installatin Instructins Read these instructins cmpletely befre
More informationAdjusting the Pekar K68 for your Dnepr or Ural Adjustment section translated from Pekar K68 manual
Adjusting the Pekar K68 fr yur Dnepr r Ural Adjustment sectin translated frm Pekar K68 manual Adjusting the Pekar K68 carburetrs n yur Dnepr r Ural. This dcument is intended t server as the primer fr prper
More informationDESCRIPTION OF OPERATION
Valve cover with a function of controlling closed position of the valve poppet type ULZS ED NS6, 5 up to 0 MPa up to 00 dm /min DT SHEET - OPER RTION MNU NUL WK 6 60 0.07 PPLICTION The valve cover with
More informationVB 60/ Zero Flow sensitive unloader valve
Ultim aggirnament: 20/04/18 VB 60/600-400-250 Zer Flw sensitive unlader valve Manuale tecnic: E 272 Pressure regulating valve unlader type with zer setting n delivery line: at gun clsure the water flw
More informationTADANO GR300EX-1. 30t ROUGH TERRAIN CRANE SPECIFICATION & LOAD CHART
TADANO GR300EX-1 30t ROUGH TERRAIN CRANE SPECIFICATION & LOAD CHART HYDRAULIC ROUGH TERRAIN CRANE GR-300EX Left-hand steering GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-sectin, 9.7 m - 31.0
More informationSAMSON CERA SYSTEM LEUSCH PFEIFFER RINGO VÁLVULAS STARLINE VETEC Rotary Valves. Information Sheet
SAMSON CERA SYSTEM LEUSCH PFEIFFER RINGO VÁLVULAS STARLINE VETEC Rtary Valves Infrmatin Sheet Part 5 DIN ANSI API Valve size DN 15 t 2000 NPS ½ t 80 1 13 / 16 t 7 1 / 16 Pressure rating PN 6 t 400 Class
More informationHYDRAULIC BEARING PULLER
HYDRAULIC BEARING PULLER Parag Ambre 1, Akash Muppid 2, Prf. Nitin Mre 3, Anil Birajdar 4, Sandip Barathe 4 1,2,4,5 BE Mechanical, Dr. D.Y. Patil Schl f Engineering, Pune. 3 Faculty, Dr. D.Y. Patil Schl
More informationDesign Standard - Fume Hoods & Fume Hood Exhausts
1.0 Intrductin Design Standard - Fume Hds & Fume Hd Exhausts The fume hd is the primary cntrl device in mst labratries fr prtecting emplyees and students frm expsure t hazardus chemicals. It is als an
More informationDC Motors LAK Catalogue-2009/10 E. LAK 2000 Serie kw 0,3-30 HP 4-75Nm. t-telectric.com
DC Mtrs LAK 2080-2132 Catalgue-2009/10 E LAK 2000 Serie 080-132 0.4-22 kw 0,3-30 HP 4-75Nm t-telectric.cm List f cntents Intrductin... p. 4 Optins... Applicatin data... Bearing data... Output data... Dimensin
More informationANNEX A Descriptions and Photos
ANNEX A Descriptins and Phts Cmpnent One: Hrizntal autclave with biler The autclave is designed t treat infectius waste by expsure t steam at temperature f up t 130ºC and abut 1.7 bars. The autclave has
More informationIntroduction. Series T Butterfly Valve. Series TC Butterfly Valve. Engineering Data. Quality Commitment. How to Order.
Table f Cntents Intrductin 1 2 Quality Cmmitment Hw t Order Series T Butterfly Valve 3 ~ 4 5 ~ 6 7 Design Feature Material Specificatins Dimensins & Weights 8 ~ 11 12 ~ 13 14 ~ 15 16 17 18 19 Series TC
More informationLT-F Compact Treaded All Terrain Surveillance & Inspection Robot
Rbts, Parts, and Custm Slutins www.superdridrbts.cm Tll Free: (866) SDRbts Phne: (919) 557-9162 Fax: 775-416-2596 1421 E. Brad Street #101 Fuquay Varina, NC 27526 LT-F Cmpact Treaded All Terrain Surveillance
More informationSELF-CLEANING FILTER WITH DOUBLE PRESSURE GAUGE
SELF-CLEANING FILTER WITH DOUBLE PRESSURE GAUGE CT2516.0_00 EN June 2015 Pair f pressure gauges t cntrl the inlet / utlet pressure and filter clgging. Self-cleaning Ensures system efficiency Limited verall
More informationInstallation Guide Contigo 6100
Installatin Guide Cmmercial Vehicle Prductivity and Security The is a high-perfrmance beacn designed fr cmmercial prductivity and security. It is ideally suited t installatins in delivery and service fleets
More information72 Mustang Mach 1 tachometer cluster and gauge conversion
72 Mustang Mach 1 tachmeter cluster and gauge cnversin Dated: 02-17-2009 (drafted by a Chevy persn wrking n his first Frd -nt gd-) The fllwing infrmatin pertains t hw I went abut cnverting the standard
More informationGENUINE ACCESSORIES INSTALLATION INSTRUCTIONS SECURITY SYSTEM KIT CONTENTS SHOCK SENSOR F-D15 WINDOW DECAL (QTY 2) F-D16
GENUINE ACCESSRIES INSTALLATIN INSTRUCTINS PART NUMBER: 0000-8F-N03 NTE: NT CMPATIBLE WITH REMTE START SYSTEM, PART# 0000-8F-N02 SECURITY SYSTEM KIT CNTENTS APPLICABLE MDELS: 2007>MAZDA CX-9 WITHUT ADVANCED
More information