TADANO GR300EX-1. 30t ROUGH TERRAIN CRANE SPECIFICATION & LOAD CHART
|
|
- Daniella Jacobs
- 5 years ago
- Views:
Transcription
1 TADANO GR300EX-1 30t ROUGH TERRAIN CRANE SPECIFICATION & LOAD CHART
2 HYDRAULIC ROUGH TERRAIN CRANE GR-300EX Left-hand steering GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-sectin, 9.7 m m DIMENSION Overall length apprx. 11,245 mm Overall width apprx. 2,620 mm Overall height apprx. 3,535 mm MASS Grss vehicle mass apprx. 26,940 kg -frnt axle apprx. 13,640 kg -rear axle apprx. 13,300 kg PERFORMANCE Max. travelling speed cmputed 47 km/h Gradeability(tan ) cmputed 78 % (at stall) CRANE SPECIFICATIONS MODEL GR-300EX CAPACITY 30,000 kg at 3.0 m BOOM 4-sectin full pwer partially synchrnized telescping bm f rund hexagnal bx cnstructin with 4 sheaves at bm head. The synchrnizatin system cnsists f 2 telescpe cylinders, extensin cables and retractin cables. Hydraulic cylinders fitted with hlding valves. Fully retracted length m Fully extended length m Extensin speed m in 91 s JIB 2-staged swingarund bm extensin. Triple ffset (5 /25 /45 ) type. Bx type tp sectin telescpes frm lattice type base sectin which stres alngside base bm sectin. Single sheave at jib head. Length m and 12.8 m SINGLE TOP (AUXILIARY BOOM SHEAVE) Single sheave. Munted t main bm head fr single line wrk. ELEVATION By a duble-acting hydraulic cylinder, fitted with hlding valve. Autmatic speed reductin and sft stp functin. Elevatin speed...0 t 81 in 44 s HOIST-Main winch Variable speed type with grved drum driven by hydraulic axial pistn mtr thrugh winch speed reducer. Pwer lad lwering and histing. Equipped with autmatic brake (Neutral brake) and cunterbalance valve. Cntrlled independently f auxiliary winch. Single line pull kn {3, kgf} Single line speed m/min (at the 4th layer) Wire rpe...spin-resistant type Diameter x length...16 mm x 170 m - 1-
3 CRANE SPECIFICATIONS HOIST-Auxiliary winch Variable speed type with grved drum driven by hydraulic axial pistn mtr thrugh winch speed reducer. Pwer lad lwering and histing. Equipped with autmatic brake (Neutral brake) and cunterbalance valve. Cntrlled independently f main winch. Single line pull kn {3, kgf} Single line speed m/min (at the 4th layer) Wire rpe...spin-resistant type Diameter x length...16 mm x 98 m SWING Hydraulic axial pistn mtr driven thrugh planetary speed reducer. Cntinuus 360 full circle swing n ball bearing slew ring. Equipped with manually lcked/released swing brake. Swing speed min -1 {rpm} HYDRAULIC SYSTEM Pumps...2 variable pistn pumps fr telescping, elevating and winches. Tandem gear pump fr steering, swing and ptinal equipment. Cntrl valves...multiple valves actuated by pilt pressure with integral pressure relief valves. Circuit...Equipped with air cled type il cler. Oil pressure appears n AML display fr main circuit. Hydraulic il tank capacity... apprx. 380 liters Filters...Return line filter CRANE CONTROL By 4 cntrl levers fr swing, bm hist, main winch, bm telescping r auxiliary winch with 2 cntrl pedals fr bm hist and bm telescping based n ISO standard layut. Cntrl lever stands can change neutral psitins and tilt fr easy access t cab. TADANO Autmatic Mment Limiter (Mdel:AML-L) Main unit in crane cab gives audible and visual warning f apprach t verlad. Autmatically cuts ut crane mtins befre verlad. With wrking range (lad radius and/r bm angle and/r tip height and/r swing range) limit functin. Autmatic Speed Reductin and Sft Stp functin n bm elevatin and swing. Nine functins are cnstantly displayed. Digital liquid crystal display: Either bm angle r mment % Either bm length r ptential hk height Either actual lad radius r swing angle Actual hk lad Permissible lad Either jib ffset angle r number f parts line f rpe Bm psitin indicatr Either utrigger psitin r n rubber indicatr Bar graphical display: Either mment as percentage r main hydraulic pressure and trque cnverter il pressure (Display changes by alternatin key n the AML frnt panel) OUTRIGGERS 4-Hydraulically perated H-type utriggers. Each utrigger cntrlled simultaneusly r independently frm the cab. Equipped with sight level gauge. Flats munted integrally with the jacks retract t within vehicle width. All cylinders fitted with pilt check valves. Crane peratin with different extended length f each utrigger. Equipped with extensin width detectr fr each utrigger. Extended width Fully...6,300 mm Middle...5, mm Middle...5,000 mm Minimum... mm Flat size( Diameter ) mm CAB Bth crane and drive peratins can be perfrmed frm ne cab munted n rtating superstructure. One sided ne-man type, steel cnstructin with sliding dr access and tinted safety glass windws pening at side. Dr windw is pwered cntrl. Operatr's 3 way adjustable seat with headrest and armrest. COUNTERWEIGHT Integral with swing frame Mass...2,380 kg NOTE : Each crane mtin speed is based n unladen cnditins. - 2-
4 CARRIER SPECIFICATIONS TYPE Rear engine, left hand steering, driving axle 2-way selected type (by manual switch). 4 x 2 frnt drive 4 x 4 frnt and rear drive FRAME High-tensile steel, all welded mn-bx cnstructin. ENGINE Mdel...Cummins QSB5.9-30TAA [QSB-173C] -EUROMOTO Stage 2- Type...6 cylinder in line, direct injectin, water cled, intercler turb charged diesel engine. Pistn displacement...5, cm 3 Bre x strke mm x 120 mm Max. utput kw {175 PS} at 2, min -1 {rpm} Max. trque N-m {73 kgf-m} at 1, min -1 {rpm} TRANSMISSION Electrnically cntrlled full autmatic transmissin. Trque cnverter driving full pwershift with driving axle selectr. 8 frward and 2 reverse speeds. 4 speeds - High range - 2 wheel drive ; 4 wheel drive 4 speeds - Lw range - 4 wheel drive AXLES Frnt...Full flating type, steering and driving axle with planetary reductin. Rear...Full flating type, steering and driving axle with planetary reductin. Nn-spin differential. STEERING Hydraulic pwer steering cntrlled by steering wheel. Three steering mdes available: 2-wheel frnt 4-wheel crdinated 4-wheel crab SUSPENSION Frnt...Semi-elliptic leaf springs with hydraulic lckut device. Rear...Semi-elliptic leaf springs with hydraulic lckut device. BRAKE SYSTEM Service...Air ver hydraulic disc brakes n all 4 wheels. Parking / Emergency... Spring applied-air released brake acting n input shaft f frnt axle. Auxiliary...Electr-pneumatic perated exhaust brake. ELECTRIC SYSTEM 24 V DC. 2 batteries f 12 V Ah capacity. FUEL TANK CAPACITY 300 liters TIRES Frnt / 95 R 25(OR), Single x 2 Rear / 95 R 25(OR), Single x 2 TURN RADIUS Min. turning radius (at center f extreme uter tire) 2-wheel steering m 4-wheel steering m EQUIPMENTS STANDARD EQUIPMENTS Autmatic mment limiter (AML-L) External lamp (AML) Pendant type ver-winding cutut Winch autmatic fail-safe brake Cable fllwer 30 t capacity hk blck (4 sheaves) 3.9 t capacity hk blck (swivel hk) Hk safety latch Pilt check valves Hlding valves Cunterbalance valves Hydraulic pressure relief valves Swing brake Swing lck (360 swing lck) Bm angle indicatr Bm elevatin ft pedal Bm telescping ft pedal Outrigger extensin width detectr Sight level gauge Hydraulic il cler Electric windshield wiper and washer Rf windw wiper and washer Pwer windw (Cab dr) Tachmeter/Speedmeter 3 way adjustable clth seat with seat belt, headrest and armrest Cab flr mat Sun visr (Frnt and rf) Autmatic drive system Transmissin neutral psitin engine start Overshift preventin Parking braked travel warning Tilt-telescpe steering wheel Back-up alarm Air cleaner dust indicatr Air dryer Water separatr with filter Engine ver-run alarm Hydraulic lckut suspensin Nn-spin differential (Rear) Twing eyes - frnt and rear OPTIONAL EQUIPMENTS Winch drum rtatin indicatr fr main and auxiliary winch Air cnditiner and defrster (Ht water cab heater type) Electric fan Tire inflatin kit - 3-
5
6 RATED LIFTING CAPACITIES ISO4305 A 9.7m 16.8m 24.4m 31.0m B C C C C , , , , , , , , , Outriggers fully extended (6.3m) ,300 17,000 15, 14, 13, 12, 10, 9,000 7,050 5, 4, 4,050 3, , 1 9, 8, 7, 6, 5, 4, 4,150 3, 3,200 2, 2, 2,050 1, ,100 7, 6, 6,200 5, 5,400 5,000 4,400 3,850 3, 3,050 2, 2,400 1, 1,300 D 0 Lifting capacities at zer degree bm angle Outriggers fully extended (6.3m) -- A 9.7m 16.8m 24.4m 31.0m C B B B B , , A :Bm length (m) B :Lad radius (m) C :Laded bm angle ( ) D :Minimum bm angle ( ) fr indicated bm length (n lad) Outriggers fully extended (6.3m) 31.0m Bm + 7.2m Jib 31.0m Bm m Jib C 5 ffset 25 ffset 45 ffset C 5 ffset 25 ffset 45 ffset R W R W R W R W R W R W , 3, 3, 3,230 2, 2, 2, 2, 2,150 1, 1, 1, ,400 2,300 2,000 1,930 1, 1, 1, , 1, 1, 1, 1, 1,380 1,330 1,300 1, ,150 1,930 1,630 1, 1,300 1,230 1, , C :Bm angle ( ) R :Lad radius (m) W :Rated lifting capacity - 5-
7 RATED LIFTING CAPACITIES ISO4305 A 9.7m 16.8m 24.4m 31.0m B C C C C , , , , , , , , , D Outriggers extended t middle (5.9m) ,300 17,000 15, 14, 13, 12, 9, 7, 6,250 5,150 4,200 3, 2, , 1 9, 8, 7,050 5, 4, 4,200 3, 3,050 2, 2,250 1, ,100 7, 6, 6,200 5, 5,300 4, 3,850 3, 2,850 2, 1, Lifting capacities at zer degree bm angle Outriggers extended t middle (5.9m) -- A 9.7m 16.8m 24.4m 31.0m C B B B B , , A :Bm length (m) B :Lad radius (m) C :Laded bm angle ( ) D :Minimum bm angle ( ) fr indicated bm length (n lad) 0 Outriggers extended t middle (5.9m) 31.0m Bm + 7.2m Jib 31.0m Bm m Jib C 5 ffset 25 ffset 45 ffset C 5 ffset 25 ffset 45 ffset R W R W R W R W R W R W , 3, 3, 3,230 2, 2, 2, 2, 2,150 1,880 1, ,400 2,300 2,000 1,930 1, 1, 1, 1,250 1, , 1, 1, 1, 1, 1,380 1,330 1, ,150 1,930 1,630 1, 1,300 1, , C :Bm angle ( ) R :Lad radius (m) W :Rated lifting capacity - 6-
8 RATED LIFTING CAPACITIES ISO4305 Outriggers extended t middle (5.0m) B A C 9.7m C 16.8m C 24.4m C , , , ,300 19, , , , , D ,300 17,000 15,000 12, 10,850 9, 7,300 5, 4, 3, 3,100 2, 1, , 10,400 8,200 6, 5, 4, 3, 3,250 2, 2,300 1, 1, ,100 7, 6, 5, 4, 4,250 3, 3,100 2, 2,250 1, 0 26 Lifting capacities at zer degree bm angle Outriggers extended t middle (5.0m) m 16.8m 24.4m A C B B B , , 21.9 A :Bm length (m) B :Lad radius (m) C :Laded bm angle ( ) D :Minimum bm angle ( ) fr indicated bm length (n lad) 31.0m Outriggers extended t middle (5.0m) 31.0m Bm + 7.2m Jib 31.0m Bm m Jib C 5 ffset 25 ffset 45 ffset C 5 ffset 25 ffset 45 ffset R W R W R W R W R W R W , 3, 3, 3,230 2, 2, 2, 2,050 1, ,400 2,300 2,000 1,930 1, 1, , 1, 1, 1, 1, 1, ,150 1,930 1,630 1, 1,380 1,250 1, , C :Bm angle ( ) R :Lad radius (m) W :Rated lifting capacity - 7-
9 RATED LIFTING CAPACITIES ISO4305 Outrigger extended t minimum (2.2m) A 9.7m 16.8m 24.4m 31.0m B C C C C ,200 10,250 8,000 6, 5, 4, 3,850 3,300 2, D ,000 9, 7, 6, 5,300 4,400 3, 3,050 2, , 8, 7,250 6,200 5,200 4,400 3, 3,300 2,400 Lifting capacities at zer degree bm angle Outriggers extended t minimum (2.2m) -- A 9.7m C B , A :Bm length (m) B :Lad radius (m) C :Laded bm angle ( ) D :Minimum bm angle ( ) fr indicated bm length (n lad) ,000 7,200 6,050 5, 4, 4,250 3, 2, 2,050 1, NOTES FOR TABLE 1. Rated lifting capacities shwn in the table are based n cnditin that crane is set n firm level surface. Thse abve bld lines are based n crane strength and thse belw, n its stability. 2. Rated lifting capacities based n crane stability are accrding t ISO The mass f the hk (270kg fr 30 t capacity, 100kg fr 3.9 t capacity), slings and all similarly used lad handling devices must be cnsidered as part f the lad and must be deducted frm the lifting capacities. 4. Fr rated lifting capacity f single tp, reduce the rated lifting capacities f relevant bm accrding t a weight reductin fr auxiliary lad handling equipment. Capacities f single tp shall nt exceed 3, kg including main bm hk mass and the net capacity must be s reduced. 5. Standard number f parts line fr each bm length is as shwn belw. Lad per line shuld nt surpass 38.2 kn {3, kgf} fr main winch and auxiliary winch. Bm length 9.7m 9.7m t 16.8m 16.8m t 31.0m Single tp / Jib Number f parts line The lifting capacity data stred in the AUTOMATIC MOMENT LIMITER (AML-L) is based n the standard number f parts line listed in the chart. Maximum lifting capacity is restricted by the number parts line f AUTOMATIC MOMENT LIMITER (AML-L). 6. The lifting capacity fr ver-side area differs depending n the utrigger extensin width. Wrk with the capacity crrespnding t the extensin width. The lifting capacities fr ver-frnt and ver-rear areas are fr utriggers fully extended. Hwever, the areas (angle a) differ depending n the utrigger extensin width. Outriggers extended width 5.9m(middle) 5.0m(middle) 2.2m(minimum) Angle a a a a a - 8-
10 RATED LIFTING CAPACITIES ISO4305 ON RUBBER Statinary A Over Frnt 9.7m 16.8m 24.4m 9.7m 16.8m B C C C C C C , , , , , , , , , , , , , , , , , , , , , , D , 8,000 7,000 6,100 5,300 4,250 3, 2, 1, ,000 3, 3,150 2, 850 Lifting capacities at zer degree bm angle Statinary A Over Frnt 9.7m 16.8m 9.7m C B B B , A :Bm length (m) B :Lad radius (m) C :Laded bm angle ( ) D :Minimum bm angle ( ) fr indicated bm length (n lad) m , ON RUBBER Unit:kg Creep Over Frnt A 9.7m 16.8m 24.4m 9.7m 16.8m 24.4m B C C C C C C , , , , , , , , , , , , , , , , , D , 7,000 6,000 5,300 4, 3, 2, 2,300 1, ,300 3,400 2, 2,250 1, 1, ,100 4,200 3, 2, 2, 1, , Lifting capacities at zer degree bm angle Creep Over Frnt 9.7m 16.8m 9.7m A C B B B , , A :Bm length (m) B :Lad radius (m) C :Laded bm angle ( ) D :Minimum bm angle ( ) fr indicated bm length (n lad) - 9-
11 RATED LIFTING CAPACITIES ISO4305 NOTES FOR ON RUBBER TABLE 1. Rated lifting capacities shwn in the table are based n cnditin that crane is set n firm level surface, with suspensin lck applied. Thse abve bld lines are based n tire capacity and thse belw, n crane stability. They are based n actual wrking radii increased by tire defrmatin and bm deflectin. 2. Rated lifting capacities based n crane stability are accrding t ISO The mass f the hk (270 kg fr 30 t capacity, 100 kg fr 3.9 t capacity), slings and all similarly used lad handling devices must be cnsidered as part f the lad and must be deducted frm the lifting capacities. 4. Fr rated lifting capacity f single tp, reduce the rated lifting capacities f relevant bm accrding t weight reductins fr auxiliary lad handling equipment. Capacities f single tp shall nt exceed 3, kg including main hk. 5. On tires lifting with "jib" is nt permitted. Maximum permissible bm length is 24.4 m. 6. CREEP is mtin fr crane nt t travel mre than 60 m in any 30 minute perid and t travel at the speed f less than 1.6 km/h. 7. During "CREEP" duties travel slwly and keep the lifting lad as clse t the grund as pssible, and especially avid any abrupt steering, accelerating r braking. 8. D nt perate the crane while carrying the lad. 9. Tires shuld be inflated t their crrect air pressure f 0.9 MPa {9.0 kgf/cm 2 }. 10. Fr CREEP peratin, set Drive select switch t "4-WHEEL(L)" and set gear shift lever t "1". 11. Standard number f parts f line fr n tires peratin shuld be accrding t the fllwing table. Lad per line shuld nt surpass 38.2 kn {3, kgf} fr main winch and auxiliary winch. Over Frnt Bm length 9.7m 16.8m 24.4m 9.7m 16.8m 24.4m Number f parts line (Single tp) (1) (1) (1) (1) (1) (1) The lifting capacity data stred in the AUTOMATIC MOMENT LIMITER (AML-L) is based n the standard number f parts line listed in the chart. Maximum lifting capacity is restricted by the number f parts line f AUTOMATIC MOMENT LIMITER (AML-L). WORKING AREA Over frnt 360 Rear apprx. 2 Withut utriggers "Over frnt" peratin shuld be perfrmed within 2 degrees in frnt f chassis
12
13 Specificatins are subject t change withut ntice. 4-12, Kamezawa 2-chme, Sumida-ku, Tky , Japan Tel : 81-(0) Fax : 81-(0) URL indexe.htm tdnihq@tadan.c.jp Printed in Japan GR-300EX
HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-300E /EX-41. Left hand steering CRANE CAPACITY
HYDRAULIC ROUGH TERRAIN CRANE GR-300EX Left hand steering GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm Overall width approx.
More informationHYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-500E /EX-02. Left hand steering CRANE CAPACITY
HYDRAULIC ROUGH TERRAIN CRANE GR-500EX Left hand steering GENERAL DATA CRANE CAPACITY 50,000 kg at m BOOM 4-section, 10.7 m - 34.7 m DIMENSION Overall length approx. 13,055 mm Overall width approx. 2,980
More informationGR-550EX HYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-550E /EX-12. Left hand steering CRANE CAPACITY
HYDRAULIC ROUGH TERRAIN CRANE SPEC. SHEET NO. GR-55E-1-212/EX-12 CRANE SPECIFICATIONS GR-55EX GENERAL DATA Left hand steering CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42. m DIMENSION Overall
More informationTADANO ROUGH TERRAIN CRANE. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m
DATE July, 2004 TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION Overall length approx. 11,245 mm
More informationTADANO ROUGH TERRAIN CRANE : GR-300EX. (Left-hand steering) GENERAL DATA. BOOM 4-section, 9.7 m m
TADANO ROUGH TERRAIN CRANE MODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245 mm Overall width
More informationTADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA
SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall
More informationCRANE SPECIFICATIONS MODEL GR-300 EX CAPACITY 30,000kg at 3.0m BOOM Four section full power partially synchronized telescoping boom of round hexagonal
DATE August, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-300EX (Left-hand steering) GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 9.7 m - 31.0 m DIMENSION MASS Overall length approx. 11,245
More informationTADANO ROUGH TERRAIN CRANE. (Right-hand steering) GENERAL DATA. 6-section, 5.3 m m
DATE February, 2009 TADANO ROUGH TERRAIN CRANE MODEL : GR-120NL (Right-hand steering) GENERAL DATA CRANE CAPACITY BOOM 12,000 kg at 2.0 m 6-section, 5.3 m - 23.8 m DIMENSIONS Overall length approx. 7,540
More informationTADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA
DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-55EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length Overall width Overall
More informationSPEC. SHEET No. GR-800E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE M ODEL : GR-800EX (Left-hand steering) G E N E R A L D ATA CRANE
DATE November, 212 TADANO ROUGH TERRAIN CRANE M ODEL : GR-8EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 8, kg at 3. m BOOM 5-section, 12. m 47. m DIMENSION Overall length approx. 14,375 mm
More informationSPEC. SHEET No. GR-600E /EU-01 DATE November, 2012 TADANO ROUGH TERRAIN CRANE MODEL : GR-600EX (Left-hand steering) G E NER A L DATA CRANE CAPA
DATE November, 212 TADANO ROUGH TERRAIN CRANE MODEL : GR-6EX (Left-hand steering) G E NER A L DATA CRANE CAPACITY 6, kg at 3. m BOOM 5-section, 11. m 43. m DIMENSION Overall length approx. 13,38 mm Overall
More informationGR-1450EX ROUGH TERRAIN CRANE
ROUGH TERRAIN CRANE GR-1EX Crane capacity : 1, kg at 2.5 m 6-section long boom : 13.1 m - 61. m 2-staged bi-fold jib : 1.3 / 18. m Maximum lifting height : 61.3 m ( Boom ).2 m ( Hydraulic Offset Jib ).4
More informationHYDRAULIC TRUCK CRANE GT-600EX CARRIER : TC section, 11.0 m 43.0 m DIMENSION Overall length. approx. 13,170 mm Overall width
HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-6E-1-31/EX-2 GT-6EX CARRIER : TC-42-2 GENERAL DATA CRANE CAPACITY 6, kg at 3. m BOOM 5-section, 11. m 43. m DIMENSION Overall length approx. 13,17 mm Overall width
More informationHYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR /ES-02. Left hand steering
HYDRULIC ROUGH TERRIN CRNE GR-350XL Left hand steering GENERL DT CRNE CPCITY 31,800 kg at m (35US TON) BOOM 4-section, 9.7 m - 3 m DIMENSION Overall length approx. 11,245 mm Overall width approx. 2,705
More informationTADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m
DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm
More informationCARRIER : TC CRANE CAPACITY 30,000 kg at 3.0 m
CARRIER : TC-4230 GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5m 33.0m DIMENSION Overall length approx. 12,670 mm Overall width approx. 2,490 mm Overall height approx. 3,450 mm MASS
More informationHYDRAULIC TRUCK CRANE
HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-55E-1-12/EX-93 GT-55EX CARRIER : TC-4255 GENERAL DATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length approx. 13,48 mm Overall
More informationC R A N E SPECIFICATIONS MODEL GR-1450EX CAPACITY 145,000 kg at 2.5 m BOOM 6 sections extended by single telescoping cylinder, 13.1m~61.0m, of round b
TADANO ROUGH TERRAIN CRANE MODEL : GR-1450EX - Hydraulic offset jib model - (Left-hand steering) G E NERAL D ATA CRANE CAPACITY 145,000 kg at 2.5 m BOOM 6-section, 13.1 m 61.0 m DIMENSION MASS Overall
More informationMODEL : GT-550EX EURO-2
DATE February, 2007 TADANO TRUCK CRANE MODEL : GT-550EX EURO-2 GENERAL DATA CRANE CAPACITY 55,000 kg at 3.0 m BOOM 5-section, 11.1 m 42.0 m DIMENSION MASS Overall length approx. 13,480 mm Overall width
More informationGT-550E. 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION. Spec. sheet No. GT-550E /C-70
GT-550E 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE DIMENSION TAIL SWING R3650 MIN 2390 2720 2820 MID 4600 REAR AXLE CENTER 290 2110 MAX 0 400 5480 MIN. 11100 - MAX. 42000 3 SIDE REFL 2650 SIDE
More informationHYDRAULIC TRUCK CRANE
HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-55E-1-12/EX-91 GT-55E CARRIER : TC-4255 GENERAL DATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length approx. 13,48 mm Overall
More informationGT-550E 55 Metric Tons Capacity
GT-55E 55 Metric Tons Capacity EURO-2 HYDRAULIC TRUCK CRANE Spec. sheet No. GT-55E-1-132/EX-5 DIMENSIONS MIN. 111 - MAX. 42 368 SIDE REFL (RED) 265 CENTER LIGHT 14 o 85 REFL 24 12 o 124 SIDE TURN 39 62
More informationHYDRAULIC ROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-800E /EX-03. Left hand steering CRANE CAPACITY
HYDRULI ROUGH TERRIN RNE GR-8EX Left hand steering SPE. SHEET NO. GR-8E-2-12/EX-3 GENERL DT RNE PITY 8 kg at 3. m BOOM 5-section 12. m - 47. m DIMENSION Overall length approx. 143 mm Overall width approx.
More informationROUGH TERRAIN CRANE GENERAL DATA CRANE SPECIFICATIONS SPEC. SHEET NO. GR-1450E /EX-03. Left - hand steering CRANE CAPACITY BOOM DIMENSION
ROUGH TRRAIN CRAN SPC. SHT NO. GR-1-2-12/X-3 GR-1X Left - hand steering GNRAL DATA CRAN CAPACITY BOOM DIMNSION 1, kg at 2.5 m 6-section, 13.1 m - 61.m Overall length approx. 16,19 mm Overall width approx.
More informationGT-550E-2. Hydraulic Truck Crane. Crane Capacity 55,000 kg at 3.0 m
GT-550E-2 Crane Capacity 55,000 kg at 3.0 m Euro-3 Hydraulic Truck Crane DIMENSIONS - Over all length:13,480mm - Over all width: 2,820mm - Over all height: 3,680mm MASS Gross Vehicle mass:41,500kg - Front:16,800kg
More informationIC-80-F. Tech Spec 2-WHEEL DRIVE. * Capacity on outriggers...18,000 lbs. * Pick and carry capacity up to...11,700 lbs. * Height * Width...
Tech Spec IC-8-F 2-WHEE DRIVE * Capacity n utriggers...18, lbs. * Pick and carry capacity up t...11,7 lbs. * Height...7 3 * Width...6 6 * Sheave height...up t 46 * Hrizntal Reach...up t 4 * Tight turning
More informationROUGH TERRAIN CRANE GR-160N
ROUGH TERRAIN CRANE GR-160N JAPANESE SPECIFICATIONS GR OUTLINE X-type Outrigger SPEC. NO. GR-160N-1-00101 Control No. GR-160N-1-00101 / JA-01-1 - GR-160N CRANE SPECIFICATIONS CRANE CAPACITY 6.5m 16,000kg
More informationROUGH TERRAIN CRANE GR-250N
ROUGH TERRAIN CRANE GR-250N JAPANESE SPECIFICATIONS GR OUTLINE 4-section Boom, 2-staged Standard Jib X-type Outrigger SPEC. NO. GR-250N-1-00103 Control No. GR-250N-1-00103 / JA-04-1 - GR-250N CRANE SPECIFICATIONS
More informationROUGH TERRAIN CRANE GR-350N
ROUGH TERRAIN CRANE GR-350N (5-section Boom, 2-staged Power Tilt Jib, X-type Outrigger) JAPANESE SPECIFICATIONS GR SPEC. NO. GR-350N-1-00101 GR-350N-1-00102 OUTLINE Winch without free-fall device Winch
More informationROUGH TERRAIN CRANE GR-160N
ROUGH TERRAIN CRANE GR-160N JAPANESE SPECIFICATIONS OUTLINE H-type Outrigger SPEC. NO. Control No. JA-01 GR-160N 1. Crane Specifications Crane Crane Capacity 6.5 m boom 16,000 kg x 3.0 m (6-part line)
More informationROUGH TERRAIN CRANE TR-250M
ROUGH TERRAIN CRANE TR-250M JAPANESE SPECIFICATIONS TR OUTLINE 4-section Boom, 2-staged Standard Jib X-type Outrigger SPEC. NO. TR-250M-6-00103 Control No. JA-02 371 TR-250M CRANE SPECIFICATIONS CRANE
More informationROUGH TERRAIN CRANE TR-500M
ROUGH TERRAIN CRANE TR-500M JAPANESE SPECIFICATIONS TR OUTLINE 6-section Boom, 2-staged Power Tilt Jib H-type Outrigger SPEC. NO. TR-500M-3-00113 Control No. JA-02 327 TR-500M CRANE SPECIFICATIONS CRANE
More informationROUGH TERRAIN CRANE GR-500N
ROUGH TERRAIN CRANE GR-500N JAPANESE SPECIFICATIONS GR OUTLINE 6-section Boom, 2-staged Full Auto Jib X-type Outrigger SPEC. NO. GR-500N-1-00101 Control No. GR-500N-1-00101 / JA-03-1 - Return to index
More informationROUGH TERRAIN CRANE TR-160M
ROUGH TERRAIN CRANE TR-160M JAPANESE SPECIFICATIONS TR OUTLINE 6-section Boom, 1-staged Jib H-type Outrigger SPEC. NO. Control No. JA-0 39 TR-160M CRANE SPECIFICATIONS CRANE CAPACITY 6.5m Boom 16,000kg
More informationROUGH TERRAIN CRANE TR-250M
TR ROUGH TERRAIN CRANE TR-250M JAPANESE SPECIFICATIONS OUTLINE 4-section Boom, 2-staged Power Tilt Jib X-type Outrigger SPEC. NO. TR-250M-6-00101 Control No. JA-02-61 - Return to INDEX TR-250M CRANE SPECIFICATIONS
More informationROUGH TERRAIN CRANE TR-500M
TR ROUGH TERRAIN CRANE TR-500M JAPANESE SPECIFICATIONS OUTLINE 6-section Boom, 2-staged Power Tilt Jib X-type Outrigger SPEC. NO. TR-500M-3-00101 Control No. JA-03-35 - Return to INDEX TR-500M CRANE SPECIFICATIONS
More informationHYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS
GR-130EX (Right-hand drive) 13 Ton apacity SPE. SHEET NO. GR-130E-2-00103/EX-06 HYDRAULI ROUGH TERRAIN RANE DIMENSIONS R1,600 1,660 2,845 2,000 MAX: 4,700 MIN: 1,640 MIN: 5,300 MAX: 23,800 350 1,660 3,040
More informationGR-1000XL HYDRAULIC ROUGH TERRAIN CRANE. (Left-hand drive) 90.7 Metric Ton (100 US Ton) Capacity DIMENSIONS
4,19 GR-1XL (Left-hand drive) 9.7 Metric Ton (1 US Ton) Capacity SPEC. SHEET NO. GR-1-3-14/ES-4 HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS 2,7 5,5 6,7 7,3 12, 47, 2,2 3,795 12.2 15. 2,52 3,315 8,2 14,375
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-1600XL 160 Ton Capacity (145 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -1.5 degree. GENERAL DIMENSIONS (26.5 R25 Tires) Feet Meters Turning radius
More informationTRUCK CRANE TL-250M JAPANESE SPECIFICATIONS. OUTLINE Jib which swings from and stores under the boom NISSAN DIESEL KC-KG520SN TL-250M
TRUCK CRANE TL-250M JAPANESE SPECIFICATIONS TL CARRIER MODEL NISSAN DIESEL KC-KG520SN MITSUBISHI KC-KS305R OUTLINE Jib which swings from and stores under the boom SPEC. NO. TL-250M-5-10101 Control No.
More information20/25 tm. ORMIG S.p.A. RINAQ ISO9001:2000 Ccrnted Qualify System. ORMIG S.pA TELEFAX (+39) TEL. (+39) r.a.
Member f CISQ feder t>cc RINAQ ISO9001:2000 Ccrnted Qualify System I 20/25 tm ORMIG S.p.A. TEL. (+39) 014380051 r.a. ORMIG S.pA TELEFAX (+39) 014386568 PIAZZALE ORMIG E-mail: mktg@rm igspa.cm P.O. BOX
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-300XL 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS GENERAL DIMENSIONS (20.5 X 25 Tires) Feet Meters Turning radius 4 wheel steer 20' 12" 6.4 2 wheel steer 36' 5" 11.1
More informationGTC-300EX. 27t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO /15 ISO
GENERAL DATA CRANE CAPACITY 27t at 3.0m BOOM DIMENSION Overall Length Overall Width (tracks extended) Overall Width (tracks retracted) Overall Height MASS Gross Vehicle Mass (Standard Equipment Package)
More informationGR-1000XL GR-750XL GR-550XL GR-350XL ROUGH TERRAIN CRANE GR-1000XL GR-750XL GR-550XL GR-350XL 68 METRIC TON CAPACITY (75 US TON)
ROUGH TERRAIN CRANE GR-1000XL GR-750XL 90.7 METRIC TON CAPACITY (100 US TON) 68 METRIC TON CAPACITY (75 US TON) GR-550XL GR-1000XL 50 METRIC TON CAPACITY (55 US TON) GR-750XL GR-550XL TADANO LTD. (International
More informationTRUCK CRANE TG-500M JAPANESE SPECIFICATIONS NISSAN DIESEL KC-KG530TN TG-500M MITSUBISHI KC-KS509S TG-500M Control No.
TRUCK CRANE TG-500M JAPANESE SPECIFICATIONS TG CARRIER MODEL NISSAN DIESEL KC-KG530TN MITSUBISHI KC-KS509S SPEC. NO. TG-500M-5-10101 Control No. JA-01-209 - Return to INDEX TG-500M CRANE SPECIFICATIONS
More informationCrane Specification: TADANO TR-200M. Any lift, anywhere, any time
Crane Specification: TADANO TR-200M T A D A N O T R - 2 0 0 M Any lift, anywhere, any time C O M P R E H E N S I V E L I F T I N G S O L U T I O N S We look forward to providing a full heavy lift engineering
More informationKATO KRM-13H. 13 TONNE HYDRAULIC SLEW CRANE Specification
KATO KRM-13H 13 TONNE HYDRAULIC SLEW CRANE Specification Height Length Width Regd Weight TARE 2.845 m 7.375 m 1.995 m 13140 kgs ROUGH TERRAIN CRANE CRANE Description Rough terrain crane with maximum lifting
More informationALL TERRAIN CRANE AR-1600M
ALL TERRAIN CRANE AR AR-1600M JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF160-5 SPEC. NO. AR-1600M-1-90101 The "fully automatic luffing jib" and the "luffing jib" are optional equipment. Refer to the
More informationGR-800EX GR-600EX GR-500EX GR-300EX ROUGH TERRAIN CRANE GR-800EX GR-600EX GR-500EX GR-300EX 60 METRIC TON CAPACITY 80 METRIC TON CAPACITY
ROUGH TERRAIN CRANE GR-8EX GR-6EX 8 METRIC TON CAPACITY 6 METRIC TON CAPACITY GR-EX GR-3EX GR-8EX METRIC TON CAPACITY GR-6EX GR-EX GR-3EX TADANO LTD. (International Division) 4-12, Kamezawa 2-chome, Sumida-ku
More informationPRELIMINARY GTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /14-ISO
GENERAL DATA CRANE CAPACITY 120t at 3.0m BOOM 5-section, 12.8 m 47.2 m DIMENSION Overall Length 15.8 m Overall Width (tracks extended) 5.8 m Overall Width (tracks retracted) 3.66 m Overall Width (tracks
More informationHYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS
GR-5EXL (Left-hand drive) 51 Ton apacity SPE. SHEET NO. GR-5E-3-12/EX-4 HYDRAULI ROUGH TERRAIN RANE R4 7: MAX 65: MID2 5: MID1 248: MIN DIMENSIONS 1 111 42 237 45 17.5 13 48 386 38 1 183 336 3 5 839 72
More informationROUGH TERRAIN CRANE DIMENSIONS
TR-300XL-4 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS GENERAL DIMENSIONS (20.5 X 25 Tires) Feet Meters Turning radius 4 wheel steer 20' 12" 6.4 2 wheel steer 36' 5" 11.1
More informationGR-1000XL GR-750XL GR-350XL ROUGH TERRAIN CRANE GR-1000XL GR-750XL GR-350XL 90.7 METRIC TON CAPACITY (100 US TON) 68 METRIC TON CAPACITY (75 US TON)
ROUGH TERRAIN CRANE GR-750XL 90.7 METRIC TON CAPACITY (100 US TON) 68 METRIC TON CAPACITY (75 US TON) 31.8 METRIC TON CAPACITY (35 US TON) GR-750XL TADANO LTD. (International Division) 4-12, Kamezawa 2-chome,
More informationGTC-400EX 40t Telescopic Boom Crawler Crane
GENERAL DATA CRANE CAPACITY 40t at 3.0m BOOM 4-section, 10.4 m 32.0 m DIMENSION Overall Length 13.31 m Overall Width (tracks extended) 5.59 m Overall Width (tracks retracted) 3.66 m Overall Height 3.05
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-500XL 50 Ton Capacity (45.4 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -0.8 degree. GENERAL DIMENSIONS (23.5-25 20PR Tires) Feet Meters Turning radius
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-150XL 15 Ton Capacity (13.6 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS GENERAL DIMENSIONS (275/80R22.5 Tires) Feet Meters Turning radius 4 wheel steer 12' 5-5/8" 3.8 2 wheel steer 21' 3-7/8"
More informationTADANO MODEL GR1600XL TON CAPACITY WORKING RANGE CHART
LIFTING CHARTS - Rough Terrain Cranes TADANO MODEL - 160 TON CAPACITY WORKING RANGE CHART 1 WORKING RANGE CHART 2 RATED LIFTING CAPACITIES (IN POUNDS) A 42.8' 57.2' 71.6' 86.1' 100.5' 114.9' 129.3' 143.7'
More informationGR-1100EX. (Left-hand drive) 110 Ton Capacity HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS. Min: 12,000 Max: 56,000
GR-1100EX (Left-hand drive) 110 Ton Capacity HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS 4,390 Min: 12,000 Max: 56,000 2,200 445 3,795 2,700 5,500 6,700 7,300 16.2 12.5 2,502 3,315 1,875 3,550 3,780 8,580
More informationGTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /16
GENERAL DATA CRANE CAPACITY 80t at 3.0m BOOM DIMENSION Overall Length Overall Width (tracks extended) Overall Width (tracks retracted) Overall Width (tracks removed) Overall Height (working) MASS Gross
More informationHYDRAULIC TRUCK CRANE DIMENSIONS
GT-00EL (Left-hand drive, EURO3, AMT) 0 Ton Capacity SPEC. SHEET NO. GT-00E-3-001/EX-03 HYDRAULIC TRUCK CRANE DIMENSIONS 0, 290 MID2.,500 2,079 MAX. 7,000 MID1.,700 MIN. 2,5 2,800 R3 50 5,580 MIN.: 11,000
More informationROUGH TERRAIN CRANE SPECIFICATION. CARRIER Carrier specification Maximum traveling speed 49km/h Grade ability
ROUGH TERRAIN CRANE CRANE Description Rough terrain crane with maximum lifting capacity 13 ton Crane specification 5.3 m 13,000kg 1.7 m (Parts of line : 8) 9.04 m 6,000kg 4.0 m (Parts of line : 4) 12.78
More informationTELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY
TELESCOPIC BOOM CRAWLER CRANE 9010 45 TON CAPACITY VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel
More informationTADANO MODEL TM TON CAPACITY
LIFTING CHARTS - Trucks TADANO MODEL TM-35100-35 TON CAPACITY WORKING RANGE 25 45 5 160ʼ 150ʼ 140ʼ 79.5 7 6 100ft + 28.2ʼ jib 100ft + 50.0ʼ jib 5 45 4 35 3 86.2ft 100ft 130ʼ 120ʼ 110ʼ 100ʼ 90ʼ 80ʼ 70ʼ
More informationMax. Boom & Fixed Jib Length: Meters. Specifications
View thusands f Crane Specificatins n FreeCraneSpecs.cm ---, Hydraulic Crawler Crane KOBELCO 70Max. Ufting Capaci\y:0 Max. Bm & Fixed Jib Length: 73. + 30.48 Meters Specificatins Metric Tns at MetelS Advanced
More informationROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size.
ROUGH TERRAIN CRANE CRANE Specifi cation Maximum lifting capacity 70ton 2.5m length (6 section) Fly jib length 8.3m-13.2m (2 section, offset 7 60 ) Maximum rated lifting height 45.5m () 58.6m (jib) Hoisting
More informationHYDRAULIC TRUCK CRANE DIMENSIONS
GT-0EL (Left-hand drive, EURO3, AMT) Ton Capacity SPEC. SHEET NO. GT-0E-3-001/EX-03 HYDRAULIC TRUCK CRANE DIMENSIONS 5,2 MID1. 4,0 MIN. 2,10 2,550 R3 MID2. 5,00 MAX. 6,0 0 1,5 0 5,0 MIN.:,0 MAX.:,0 00
More informationTELESCOPIC BOOM CRAWLER CRANE 30 TON CAPACITY
TELESCOPIC BOOM CRAWLER CRANE 6010 30 TON CAPACITY OPTIONAL EQUIPMENT ACCESS WALKWAYS VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive
More informationROUGH TERRAIN CRANE. GR-XL Series TON CAPACITY
ROUGH TERRAIN CRANE GR-XL Series 35-100 TON CAPACITY Crane capacity: 35 tons (31.8 metric tons) 4-section boom: 101.7 ft (31.0 m) 2-staged jib: 23.6 ft / 42 ft (7.2 m / 12.8 m) Crane capacity: 55 tons
More informationALL TERRAIN CRANE GA-700N
ALL TERRAIN CRANE GA GA-7N JAPANESE SPECIFICATIONS CARRIER MODEL NISSAN KL-AU552WN SPEC. NO. GA-7N-1-112 Control No. GA-7N-1-112 / JA-2-1 - GA-7N-1-112/JA-2 GA-7N CRANE SPECIFICATIONS CRANE CAPACITY 11.5m
More informationGR500XL-1 WORKING RANGE CHART
LIFTING CHARTS - Rough Terrain Cranes TADANO MODEL - 50 TON CAPACITY WORKING RANGE CHART Lifting Height in Feet Axis of Rotation Load radius from Axis of Rotation in Feet NOTE: Boom and jib geometry shown
More informationALL TERRAIN CRANE GA-1000N
ALL TERRAIN CRANE GA GA-N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF11-4 SPEC. NO. GA-N-1-912 Control No. JA-2 35 GA-N-1-912 GA-N CRANE SPECIFICATIONS CRANE CAPACITY 12.2m Boom,kg at 2.8m (13part-line)
More informationROUGH TERRAIN CRANE DIMENSIONS
TR-450XL-4 45 Ton Capacity (40.8 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS GENERAL DIMENSIONS (23.5 x 25 Tires) Note: Dimension is with boom angle at -0.8 degree. Feet Meters Turning radius:
More informationSPECIFICATION. CRANE Specification. CARRIER Specification
CRANE Specification Description Model KATO FULLY HYDRAULIC ALL TERRAIN CRANE KA-1300SL Maximum lifting capacity 130ton 2.5m Boom length 11.8m 52.0m (6 section) SL jib length 9.2m-26.6m ( section) Hoisting
More informationROUGH TERRAIN CRANE DIMENSIONS
TR-300XL-3 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS 7' 1/4" (2.14m) 7' 2-5/8" (2.2m) 8' 11-7/8" (2.74m) GENERAL DIMENSIONS (20.5 x 25 Tires) Feet Meters Turning radius:
More informationKato CR-200 Ri. 20 t All Terrain Crane. Tel: Fax:
Kato CR-200 Ri 20 t All Terrain Crane 1565 3165 2965 2245 1665 200 200 1575 350 10 1880 5 13. 350 3210 Min: 6500 Max: 28000 Stroke: 21500 1685 6940 3345 2115 3250 8710 Ramp break over : 23゚ When the suspension
More informationTable of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)
Boom Power Jib Boom (Stationary on rubber) Boom (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1
More information( 주 ) 육천건설 13' 6-1/4" (4120)
13' 6-1/4" (4120) CRANE SPECIFICATIONS BOOM * Maximum permissible line pull may be affected by wire rope Four section full power synchronized telescoping boom, strength. 33.5'~108.3' (10.2m~33m), of round
More informationHYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS
GR-XLL (Left-hand drive) 51 Ton apacity SPE. SHEET NO. GR--3-12/ES-3 HYDRAULI ROUGH TERRAIN RANE R4 7: MAX : MID2 5: MID1 248: MIN DIMENSIONS 1 111 42 237 45 17.5 13 48 386 38 1 183 336 367 5 839 24 296
More informationALL TERRAIN CRANE GA-1000N
ALL TERRAIN CRANE GA GA-1N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF11-4 SPEC. NO. GA-1N-1-912 Control No. GA-1N-1-912 / JA-3-1 - CRANE CAPACITY 12.2m Boom 1,kg at 2.8m (13part-line) 21.1m Boom 5,kg
More informationGTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /15-ISO
GENERAL DATA CRANE CAPACITY 120t at 3.0m BOOM DIMENSION Overall Length Overall Width (tracks extended) Overall Width (tracks retracted) Overall Width (tracks removed) Overall Height (working) MASS Gross
More informationROUGH TERRAIN CRANE DIMENSIONS
TR-350XL-3 35 Ton Capacity (31.7 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS 7' 1/4" (2.14m) 7' 2-5/8" (2.2m) 8' 11-7/8" (2.74m) GENERAL DIMENSIONS (20.5 x 25 Tires) Feet Meters Turning radius:
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-350XL 35 Ton Capacity (31.8 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at 0 degree. GENERAL DIMENSIONS (20.5-25 Tires) Feet Meters Turning radius 4 wheel
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-1000XL 100 Ton Capacity (90.7 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -1.5 degree. GENERAL DIMENSIONS (29.5-25 Tires) Feet Meters Turning radius
More information33tm. ORMIG S.p.A. com 1S07Fi ()VA na (AI) TEL. ( +-39) r a TELEFAX (+39)
33tm TEL. ( +-39) 014380051 r a TELEFAX (+39) 0143.86568 E-mail mktg@rmlgspacm ORMGSpA PAZZALE ORMG PO BOX63 ORMG S.p.A. E-mail sales@rmlsa cm 1S07Fi ()VA na (A) TECHNCAL FEATURES CARRER: Frame: Engine:
More informationROUGH TERRAIN CRANE. Table of contents SPECIFICATION 1 LIFTING CAPACITIES. Stationary on rubber 2 Pick & carry m Boom+10.
ROUGH TERRAIN CRANE Table of contents SPECIFICATION 1 LIFTING CAPACITIES 2 Stationary on rubber 2 Pick & carry 2 17.5m +6.5m SL Jib 3 17.5m +10.25m SL Jib 3 17.5m +14.0m SL Jib 3 32.5m +6.5m SL Jib 5 32.5m
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-750XL-2 75 Ton Capacity (68 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -1.6 degree. GENERAL DIMENSIONS (29.5-25 Tires) Feet Meters Turning radius 4
More informationROU GH T ERRAI N CRAN E
ROU GH T ERRAI N CRAN E SPECIFICATION CARRIER CRANE Description Rough terrain crane with maximum lifting capacity 3 ton Crane specification Maximum rated lifting capacity length Fly jib length Maximum
More informationTable of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)
Power Jib (Stationary on rubber) (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1 Notes for the
More informationNEW RK SERIES. Model: RK350-2 ROUGH TERRAIN CRANE RK350. Max. Lifting Capacity: 35 tons x 3.0 m Max. Boom Length: 35.0 m
NEW RK SERIES Model: RK350-2 ROUGH TERRAIN CRANE RK350 S P E C I F I C A T I O N S Max. Lifting Capacity: 35 tons x 3.0 m Max. Boom Length: 35.0 m 341 SPECIFICATIONS UPPER STRUCTURE SWING UNIT A hydraulic
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-1000XL-2 100 Ton Capacity (90.7 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -1.5 degree. GENERAL DIMENSIONS (29.5-25 Tires) Feet Meters Turning radius
More informationROUGH TERRAIN CRANE DIMENSION
TR-500XL-4 50 Ton Capacity (45.4 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSION Note : Dimension is with boom angle at -0.8 degree. GENERAL DIMENSION (23.5-25 20PR Tires) Feet Meters Turning radius
More informationNEW RK SERIES ROUGH TERRAIN CRANE RK500. Max. Lifting Capacity: 51 tons x 2.9 m Max. Boom Length: 39.0 m
NEW RK SERIES ROUGH TERRAIN CRANE S P E C I F I C A T I O N S Max. Lifting Capacity: 51 tons x 2.9 m Max. Boom Length: 39.0 m 369 SPECIFICATIONS UPPER STRUCTURE SWING UNIT A hydraulic piston motor drives
More informationMODEL : TM-1882 CRANE SPECIFICATIONS. MAXIMUM LIFTING CAPACITY lines)
DATE February, 2010 MODEL : TM-1882 CRANE SPECIFICATIONS MAXIMUM LIFTING CAPACITY 17,000kg@1.5m(6-part lines) BOOM WINCH SWING 6-sectioned, fully powered partly synchronized telescoping boom of pentagonal
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-550XL 55 Ton Capacity (50 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -0.8 degree. GENERAL DIMENSIONS (23.5-25 Tires) Feet Meters Turning radius 4 wheel
More informationROUGH TERRAIN CRANE DIMENSIONS
TR-500XL-4 50 Ton Capacity (45.4 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS GENERAL DIMENSIONS (23.5-25 Tires) Note: Dimension is with boom angle at -0.8 degree. Feet Meters Turning radius:
More informationProvisional Specifications GS-300XL. 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS
Provisional Specifications GS-300XL 30 Ton Capacity (27.2 Metric Tons) HYDRAULIC TRUCK CRANE DIMENSIONS GENERAL DIMENSIONS Feet Meters TRAVELING Turning radius Max. traveling speed 80.8mph (130km/h) Front
More informationROUGH TERRAIN CRANE DIMENSIONS
GR-8XL 8 Ton Capacity (72.6 Metric Tons) HYDRAULIC ROUGH TERRAIN CRANE DIMENSIONS Note : Dimension is with boom angle at -1.5 degree. GENERAL DIMENSIONS (29.5-25 Tires) Feet Meters Turning radius 4 wheel
More information77 Ton Tele-Boom Crawler Crane. mantiscranes.com
15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel
More informationALL TERRAIN CRANE GA-1500N
ALL TERRAIN CRANE GA GA-1500N JAPANESE SPECIFICATIONS CARRIER MODEL FAUN RTF120-5 SPEC. NO. GA-1500N-1-90101 Control No. GA-1500N-1-90101 / JA-03-1 - CRANE CAPACITY 12.6m Boom 150,000kg at 2.7m (21part-line,
More informationFULLY HYDRAULIC TRUCK CRANE
CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Main Hoisting line winch speed Auxiliary winch Main Hoisting winch speed Auxiliary winch
More information