SALTDOGG TAILGATE SPREADERS

Transcription

1 SALTDOGG TAILGATE SPREADERS SHIPS VIA UPS SHIPS VIA UPS TGSUV1B TGSUVPROA TGS01B IDEAL USE Residential Residential/Light CONSTRUCTION Polyethylene/Steel Polyethylene/Steel Polyethylene/Steel CAPACITY 4.41 cu ft/331 lb 4.41 cu ft/331 lb 8.0 cu ft/602 lb DIMENSIONS (H X W X L) 40.5" x 22.5"x 20.5" 40.5" x 22.5"x 20.5" 45.7" x 29.7"x 30.3" WEIGHT 68 lb (30.8 kg) 74 lb (33.6 kg) 135 lb (61.2 kg) FEED MECHANISM Manual Open/Close Gate w/ Gravity Gravity Feed w/ Internal Auger Assist Gravity Feed w/ Internal Auger Assist MOTOR 12 VDC 12 VDC 12 VDC SPINNER 9" (22.9 cm) poly 9" (22.9 cm) poly 9" (22.9 cm) poly SPREAD WIDTH ft. 3 ft. 30 ft. 3 ft. 30 ft. RECEIVER HITCH Class 3 or 4 Class 4 Class 4 CONTROL In-Cab On-Off ( ) Variable Speed Controller ( ) Variable Speed Controller ( ) VEHICLE APPLICATIONS SUV s, 3/4 and 1-ton trucks SUV s, 3/4 and 1-ton trucks 3/4 and 1-ton trucks ACCESSORIES Part No Auxiliary Plug Adapter with Integral On-Off Switch for TGSUV1B DESCRIPTION lbs. Vibrator Kit, for TGSUVPROA Part No Variable speed controller standard with TGSUVPROA, TGS01B, TGS03, TGGS05B, TGS06, TGS07 Call RH SCALES CO. For Your Best Price on For spreader options, accessories SaltDogg and replacement parts, see Spreaders! pages 15 through

2 SALTDOGG TAILGATE SPREADERS SALTDOGG 4SPREADERS TGS05B TGS06 TGS03 TGS07 IDEAL USE CONSTRUCTION Polyethylene/Steel Polyethylene Polyethylene/Steel Polyethylene/Steel CAPACITY cu ft/809 lb 10 cu ft/750 lb 8 cu ft/600 lb 11 cu ft/825 lb DIMENSIONS (H X W X L) 40.1" x 54.3"x 27.3" 40" x 63"x 27" 45" x 38" x 30" 46" x 53"x 31.5" WEIGHT 212 lb (96.2 kg) 160 lb (72.6 kg) 160 lb (72.57 kg) 230 lb ( kg) FEED MECHANISM Gravity Feed w/ Internal Auger Assist Manual Open/Close Gate w/ Gravity Auger Feed Mechanism w/ Stainless Steel Trough Auger Feed Mechanism w/ Stainless Steel Trough MOTOR 12 VDC 12 VDC 12 VDC Dual Shaft Gear Motor (patent pending) 12 VDC Dual Shaft Gear Motor (patent pending) SPINNER 9" poly 9" poly 12" poly 12" poly SPREAD WIDTH 3 ft. 30 ft. 3 ft. 30 ft. 3 ft. 30 ft. 3 ft. 30 ft. RECEIVER HITCH Class 4 Class 4 Class 4 w/horiz. & Vert. Adj. (patent pending) Class 4 w/horiz. & Vert. Adj. (patent pending) CONTROL Variable Speed Controller ( ) Variable Speed Controller ( ) Variable Speed Controller ( ) Variable Speed Controller ( ) VEHICLE APPLICATION* 3/4 and 1-ton trucks 3/4 and 1-ton trucks 1/2-ton and 3/4-ton trucks 3/4 and 1-ton trucks *Truck Application is only a reference. The Gross Vehicle Weight (GVW) of the truck & calculated payload must be evaluated for each application. STANDARD Part No Variable speed controller standard with TGSUVPROA, TGS01B, TGS03, TGGS05B, TGS06, TGS07 ACCESSORIES DESCRIPTION SPREADS SALT & SALT/SAND MIX lbs. Vibrator Kit, for TGS A Wintergate Spreader Mount, for TGS05B " Receiver Tube Spreader Mount Light LED Brake Light Display Rack for TGSUV Series Spreaders Display Rack for TGS01 and TGS05 Series Spreaders SPREADS SALT & SALT/SAND MIX Call RH SCALES CO. For Your Best Price on SaltDogg Spreaders! 243

3 SALTDOGG POLYMER HOPPER SALT & SAND SPREADERS NEW IDEAL USE SHPE0750/ SHPE0750X* Residential/Light SHPE1000/ SHPE1000X* Light/Medium-Duty SHPE1500/ SHPE1500X* Medium & Heavy-Duty SHPE2000/ SHPE2000X* Medium & Heavy-Duty CONSTRUCTION Polyethylene Polyethylene Polyethylene Polyethylene CAPACITY 0.75 cu. yd cu. yds cu. yds. 2.0 cu. yds. DIMENSIONS (H X W X L) 28" x 48" x 63.2" (hopper length 53") 34" x 48" x 71.5" (hopper length 68") 38" x 50.5" x 99.7" (hopper length 87.3") 40" x 47.8" x 100" (hopper length 96") WEIGHT 280 lbs / 289 lbs* 343 lbs / 347 lbs* 520 lbs / 529 lbs* 560 lbs / 564 lbs* FEED MECHANISM 2-1/2" Stainless Steel Auger & Trough 2-1/2" Stainless Steel Auger & Trough 2-1/2" Stainless Steel Auger & Trough 2-1/2" Stainless Steel Auger & Trough AUGER MOTOR 12 VDC -.50 HP 12 VDC -.50 HP 12 VDC -.50 HP 12 VDC -.50 HP SPINNER MOTOR 12 VDC -.25 HP 12 VDC -.25 HP 12 VDC -.25 HP 12 VDC -.25 HP SPINNER 12" poly 12" poly 12" poly 12" poly SPREAD WIDTH 5 ft. 30 ft. 5 ft. 30 ft. 5 ft. 30 ft. 5 ft. 30 ft. CHUTE Standard & Extended Standard & Extended Standard & Extended Standard & Extended CONTROL In-Cab Console ( ) In-Cab Console ( ) In-Cab Console ( ) In-Cab Console ( ) VEHICLE APPLICATION** Utility vehicles,1/4-ton, 1/2-ton & 3/4-ton trucks 1/2 and 3 4-ton trucks 3 4 and 1-ton trucks 1-ton trucks (above 10,000 lbs. GVW) * X indicates 12" Extended Chute Model. ** Truck Application is only a reference. The Gross Vehicle Weight (GVW) of the truck & calculated payload must be evaluated for each application. TANDARD Part No Variable speed controller standard with SHPE0750 Series, SHPE1000 Series, SHPE1500 Series, SHPE2000 Series, & SHPE4000 ACCESSORIES DESCRIPTION Remote Grease Kit, fits all SHPE Series spreaders Call RH SCALES CO. For Your Best Price on SaltDogg Spreaders! 244

4 SALTDOGG HOPPER SALT & SAND SPREADERS SALTDOGG 6SPREADERS SHPE2250 SHPE3000 SHPE4000 SHPE6000 IDEAL USE Medium & Heavy-Duty Medium & Heavy-Duty Medium & Heavy-Duty Medium & Heavy-Duty CONSTRUCTION Polyethylene Polyethylene Polyethylene Polyethylene CAPACITY 2.2 cu. yds. 3.0 cu. yds. 4.0 cu. yds. 6.0 cu. yds. DIMENSIONS (H X W X L) 44" x 48" x 114.2" (hopper length 98.5") 52.7" x 49.6" x 123.7" (hopper length 114") 43.5" x 74" x 114.8" (hopper length 99.5") 57" x 77" x 133.5" (hopper length 127") WEIGHT 680 lbs 945 lbs. 895 lbs. 1,134 lbs. FEED MECHANISM 5.25" Carbon Steel Variable Pitch Auger, Stainless Trough 6" Carbon Steel Auger, Stainless Steel Trough 5.5" Carbon Steel Auger, Stainless Steel Trough 6" Carbon Steel Auger, Stainless Steel Trough MOTOR (2) 12 VDC (2) 12 VDC (2) 12 VDC (2) 12 VDC SPINNER 14" poly 14" poly 14" poly 14" poly SPREAD WIDTH 5 ft. 30 ft. 5 ft. 30 ft. 5 ft. 30 ft. 5 ft. 30 ft. CHUTE Adjustable Adjustable Standard Standard CONTROL In-Cab Console ( ) In-Cab Console ( ) In-Cab Console ( ) In-Cab Console ( ) VEHICLE 1-ton trucks APPLICATION* (above 10,000 lbs. GVW) Min. 13,000 lbs. GVW Min. 15,000 lbs. GVW Min. 25,999 lbs. GVW SS ELECTRIC STAINLESS STEEL Compares to: Meyer /Swenson PV358 Electric, Henderson FSP Electric, Air-Flo PSV-8 Electric NEW taller 36" chute STAINLESS STEEL ELECTRICS! SS SS IDEAL USE Medium & Heavy-Duty Medium & Heavy-Duty CONSTRUCTION Stainless Steel Stainless Steel CAPACITY 2.0 cu. yds 1.5 cu. yds. 304SS DIMENSIONS (H X W X L) 32.1" x 47" x 110.8" (hopper length 96") 32.1" x 47" x 86.8" (hopper length 72") WEIGHT 995 lbs. 682 lbs. FEED MECHANISM 12"W Conveyor Chain 12"W Conveyor Chain MOTOR (2) 12 VDC (2) 12 VDC SPINNER 14" poly 14" poly SPREAD WIDTH 2-30 feet 2-30 feet RECEIVER HITCH Adjustable Adjustable CONTROL In-Cab Console ( ) In-Cab Console ( ) VEHICLE APPLICATION* 3/4 & 1-ton trucks 3/4 & 1-ton trucks * Truck Application is only a reference. The Gross Vehicle Weight (GVW) of the truck & calculated payload must be evaluated for each application. NEW taller 36" chute Part No Standard with SHPE4000 Part No Standard with SHPE2250, SHPE3000, SHPE6000, SS & SS 245

5 SALTDOGG GAS DRIVE HOPPER SALT & SAND SPREADERS 304SS 304SS SS/ SS* Medium & Heavy-Duty / * Medium & Heavy-Duty SS/ SS* SS/ SS* / * Medium & Heavy-Duty IDEAL USE Medium & Heavy-Duty CONSTRUCTION Stainless Steel Carbon Steel Stainless Steel Polyethylene CAPACITY 1.5 cu. yd. 2.0 cu. yds. 2.0 cu. yds. 2.5 cu. yds. 2.0 cu. yds. DIMENSIONS 32.1" x 47" x 91.7" 32.1" x 47" x 115.7" 32.1" x 47" x 115.7" 32.1" x 47" x 139.7" 35" x 47" x 115.6" (H X W X L) (hopper length 72") (hopper length 96") (hopper length 96") (hopper length 120") (hopper length 95.5") WEIGHT 753 lbs / 764 lbs* 945 lbs / 955 lbs* 750 lbs / 760 lbs* 910 lbs / 922 lbs* 837 lbs / 853 lbs* FEED MECHANISM 12"W Conveyor Chain 12"W Conveyor Chain 12"W Conveyor Chain 12"W Conveyor Chain ENGINE 10.5 HP Briggs & Stratton 10.5 HP Briggs & Stratton 10.5 HP Briggs & Stratton 10.5 HP Briggs & Stratton SPINNER 11.5 poly 11.5 poly 11.5" poly 11.5" poly SPREAD WIDTH 2-30 feet 2-30 feet 2-30 feet 2-30 feet CHUTE Standard & Extended Standard & Extended Standard & Extended Standard & Extended CONTROL In-Cab Console ( ) In-Cab Console ( ) In-Cab Console ( ) In-Cab Console ( ) VEHICLE APPLICATION** * Indicates Extended Chute Model. ** Truck Application is only a reference. The Gross Vehicle Weight (GVW) of the truck & calculated payload must be evaluated for each application. Standard with SS, SS, , , SS, SS, SS, SS, , Call RH SCALES CO. For Your Best Price on SaltDogg Spreaders! 246

6 SALTDOGG CONVEYOR MUNICIPAL HOPPER SPREADERS Call RH SCALES CO. For Your Best Price on SaltDogg Spreaders! Spreader Hold Down Kit 247

7 SALTDOGG WALK-BEHIND AND ATV SPREADERS BROADCAST SPREADER SHIPS VIA UPS SHIPS VIA UPS SPECIFICATIONS WB100B WB200B WB400 IDEAL USE /Residential /Residential /Residential FRAME CONSTRUCTION Steel Stainless Steel Steel/Stainless Steel trough CAPACITY 1.5 cu ft/100 lb 1.5 cu ft/100 lb 2.5 cu ft/200 lb DIMENSIONS (H X W X D) 31.5" x 26.5"x 40" 31.5" x 26.5"x 40" 35" x 44"x 45" WEIGHT 42 lbs. (19.1 kg) 42 lbs. (19.1 kg) 67 lbs. (30.4 kg) SPINNER 9" (22.9 cm) poly 9" (22.9 cm) poly Drop Spreader SPREAD WIDTH 3-24 feet 3-24 feet 28 in. CONTROL Manual Lever Manual Lever Manual Lever Call RH SCALES CO. For Your Best Price on SaltDogg Spreaders! 15 gallon capacity Quick detachable mounting bracket Spread width 25'-30' Adjustable shut-off gate 8-1/2' power cable w/ ON/OFF switch 12 VDC, 5 AMP Spreads dry free flowing materials WT. ATVS15A ATV Salt Spreader 39 lbs. 248

8 SALTDOGG SPREADER PARTS AND ACCESSORIES TAILGATE SPREADERS WT Baffle Kit SUV1 to SUVPRO Conversion Kit Vibrator, 200 lbs w/mounting Hardware 7.50 WJ215 Draw Latch Controller TGS W/ Vibrator Switch Connector Kit, TGS Series Spreader Cover w/latches, Orange Y Spreader Cover w/latches, Yellow Lid Assembly, TGS05A Lid Assembly Lid Assembly Spreader Dummy Mate Harness Wire w/plug Wire Assembly, Ignition Activation, 3' Wire Harness Assembly, 6', Socket-to-Motor Ext Wire Harness w/plug, Ring Terminals, 48" Harness, Wire Complete Harness, Truck Wire Assembly Spreader Harness Kit, TGS01 Series Spreader Harness Kit, TGS05 Series A Spinner Auger Assembly Auger Weldment w/ Set Screw Shaft, Spinner Bearing, 5/8" 4-Hole Bushing, Auger Coupling, Shaft Kit, Motor Replacement Bearing, 5/8" Bore, 4-Hole Shaft Assembly, Auger Motor Spinner Assembly Bushing, Bronze, Oilite, 1/2" ID x 5/8" OD x 1" Motor TGS 12 VDC.5 HP Motor, 12VDC, 1000 RPM, 1/8 HP w/sealed Connector Motor and Adapter Harness Kit Motor Adapter, TGS Spinner Disk, 9" OD Poly, 1-1/8" Shaft, (for use with TGSUV Series Spreaders) 1.04 WT Spinner Disk, 9" OD Poly, 1-1/8" Shaft, (for use with TGS01, TGS05 and TGSUVPRO 1.05 Series Spreaders) Spreader Speed Control Assembly Gear Motor Dual Shaft,.4 HP 12 VDC Shaft Spinner for Gear Motor Motor Coupler for A Coupling, Shaft 1/2" Bore Assembly B Coupling, Shaft 5/8" Bore Assembly C Spider, Solid Center Frame Wldmnt Assembly TGS05B T Bracket, Motor Mounting, TGS05B Gate Flow Adjuster Flow Gate Kit 1.08 ELECTRIC HOPPER SPREADERS WT Dump body Tailgate Latch Kit, Universal Lock Kit,Dump Tailgate SHPE Switch, Rocker For , Power & Vibr Controller, SHPE Series Switch, Rocker FOR , POWER or VIBR Spinner Gear Motor Auger Gear Motor Motor Replacement For Wire Harness Wire Harness, Chute Main Wire Harness Harness, Wire Repair Kit, Auger End Repair Kit Spinner End Harness # Power Cable Vibrator, 12VDC, 200 lbs. Force, 12VDC Vibrator 200 lbs. 12 VDC Chute Assembly, Extended Length Chute Assembly for SHPE Tarp for SHPE Tarp for SHPE1500 Series Tarp for SHPE2000 Series Tarp for SHPE6000 Series

9 SALTDOGG SPREADER PARTS AND ACCESSORIES SALTDOGG SPREADERS WT Controller 1400 Series Power Cord, SHPE2250, SS, -701SS, 92421SS Wire Harness Main Gear Motor 12 VDC.75 HP Repair Kit, Auger Connectors use with & Replacement Gear Motor 12 VDC.75 HP Controller Speed 12 VDC, 3/4 Hp Motor 12 VDC Spinner Chute Assembly Electric Sleeve, Auger Adapter (For 96" Electric) Remote Grease Kit, SHPE (all) 0.63 GAS HOPPER SPREADERS WT Top Screen, (for 96" x 50.75"Steel/SS Spreaders) Top Screen, (for 96" x 47" Steel/SS Spreaders) Top Screen, (for 72" x 50.75" Steel/SS Spreaders) Top Screen, (for 72" x 47" Steel/SS Spreaders) Top Screen, (for 120" x 47" Steel/SS Spreaders) SS Inverted Vee, Stainless Steel (for 120" L Spreaders) Inverted Vee, Carbon Steel, (for 96" L Spreaders) SS Inverted Vee, Stainless Steel (for 96" L Spreaders) SS Inverted Vee, 304 Stainless Steel (for 72" L Spreaders) Hopper Side Extensions Kit,12" (for 96" x 47" Steel Spreaders) SS Hopper Side Extensions Kit,12" (for 96" x 47" SS Spreaders) SS Hopper Side Extensions Kit,12" (for 120" x 47" SS Spreaders) Spreader Hold Down Kit, Four 1/2" x 6" HD Forged Turnbuckle Tarp Kit, 120" x 47" Tarp Kit, 96" x 50.5" Tarp Kit, 96" x 47" Tarp Kit, 72" x 50.5" Tarp Kit, 72" x 47" Controller, Cab w/harness Attached Harness, SCH Spreader Wiring Harness Wire for Control Box, Truck Harness Wire Extension, 6 ft 0.60 WT Wire, (4) Terminal Jumper for Cab Control Panel Wire Harness, 3 Ft Drive Sprocket, Conveyor Chain, (6) Tooth Drive Shaft, S/N(CS)1126+Above; 5.23 S/N(SST)1377+Above Drive Shaft, S/N(CS)1125+Below; 4.95 S/N(SST)1376+Below Bearing, Drive Shaft, 1-1/8", Self Align Flange Coupler, Flex Chain, Drive Shaft Gearbox, S/N Above Clevis Pin, 3/8 x 2", Zinc SSK Drive Shaft Kit, S/N(SS) 1376+Below SSK Drive Shaft Kit, S/N(SS) 1126+Above Clutch Assembly, Electric 12 VDC Gearbox Assembly w/sprocket Idle r Weldment Sprocket Idler w/bushing, S/N (CS) 1125+Below; (SS) Below Sleeve, Auger Adapter (For 96" Electric) Shaft, Idler, SCH S/N (CS) 1125+Below; S/N (SS) Below WSS Bolt, Take-Up, 304SS W Bolt, Take-Up, Plated SSK Idler Shaft Rebuild Kit, S/N (SS) 1376+Below K Idler Shaft Rebuild Kit, S/N (CS) 1125+Below Bearing, Self-Aligning Flanged 1", Extended Inner Race Take-Up Unit, 1" Idler Shaft Assembly, S/N (CS) 1126+Above; S/N (SS) Above K18N Key, Woodruff 1/4" x 1-1/8" Key, 1/4" x 1/4" x 1-1/2" Sprocket, Clutch, #40 Roller Chain, 52-Teeth Plate Type Chain, #40 Roller, Engine to Clutch, 78 Links Inc. ML Sprocket, Engine, #40 Chain, 12 Teeth w/set Screw P Chain, Conveyor (D662) Weldment Painted, 122 Links RL Link, (D662) Conveyor Chain Repair Including Hardware (for SCH096-Series)

10 SALTDOGG SPREADER PARTS AND ACCESSORIES WT RL Link, (D667H) Conveyor Chain Repair w/hardware (for 0.17 SCH096-Series) RL Link, (D667X) Conveyor Chain Repair w/ Hardware (for 0.17 SCH096-Series) Conveyor Chain Assembly (for SS-Series), 93 Links Conveyor Chain Assembly, 151 Links, SS,-350SS Master Link, #40 Roller Chain V-Box Remote Idler Bearing Grease Kit V-Box Chain Oiler System V-Box Crank-Up Chute Kit HP Briggs & Stratton Gas Engine Starter Motor, Briggs & Stratton Bracket, Throttle Motor for Tecumseh Engines Muffler, for 8HP Briggs & Stratton Engine Motor, Electric Throttle w/ Brkt. For Briggs & Stratton 0.50 Engine Bracket, Throttle Motor for Briggs & Stratton Engine Exhaust System Repair Kit for 8 & 8.5 HP Briggs & Stratton 3.84 Engine Throttle Pin Assembly Battery, 12V, 20AH, 275 CCA SLA Battery Cable, 22" Red Cable, Battery Black 14" Cable, Battery Red 14" Clamp, 1-1/8", U-Bolt Style, Zinc Hose, Exhaust, Stainless Steel Throttle Control w/bracket for Tecumseh Engine A Chute Spinner Assy., Standard Length, CS ASS Chute Spinner Assy., Standard Length, SS Chute, Spinner Extended, CS SS Chute, Spinner Extended, SS Shaft, Spinner, Std. Length, 3/4 OD x 23, Zinc X150 Shaft, Spinner, Extended Length, 3/4 OD x 35, Zinc Bearing, 3/4" w/grease Fit. In Bot., S/N (CS) 1126+Above; 1.80 S/N (SS) 1377+Above Bearing,Pil Blk,3/4,Tap Base Chain Roller #40, Spinner, 76 Links, S/N (CS) 1125+Below; S/N (SS)1376+Below 1.32 WT Chain Roller #40, Spinner, 80 Links, S/N (CS) 1126+Above; 1.40 S/N (SS)1377+Above Sprocket, #40 Chain, 16 Teeth w/set Screw, SCH Gearbox Disc Spinner 11.5 OD Poly, 3/4" Shaft, Universal Sprocket, #40 Chain, 24 Teeth w/(2)set Screws, Spinner 2.36 Chute Assy. KS301 Key, SCH, 3/16" SQ x 1" Clevis Pin, 1/4" x 2.5" Hair Spring Cotter Pin,.091 x 2" Zinc Plated K Spinner/Shaft (Rebuild) Kit- STD, S/N (CS) 1125+Below; S/N (SS) 1376+Below K Spinner/Shaft (Rebuild) Kit- EXT, S/N (CS) 1125+Below; S/N (SS) 1376+Below K Shaft Kit, SCH Spinner, Std. Length, S/N (CS) 1126+Above; S/N (SS) 1377+Above K Spinner/Shaft Kit, SCH Ext. Length, S/N (CS) 1126+Above; S/N (SS) 1377+Above Collar,.75 Dia. Lock w/2 Set Belt, Wiper 0.25 MUNICIPAL SPREADERS WT Jack Feed Gate 7.15 UNDER TAILGATE SPREADERS WT Adapter, Dump Body Spreader Sleeve, Auger Adapter (For 96" Electric) Sleeve, Auger, (SDD) Bearing, SDD Gasket, Felt Bearing SDD :1 Reduction Ratio Gearbox A Spinner & Hardware Replacement Kit A Spinner & Hardware, SDD SST Fuse, 3AG-10 AMP F00110 Frame, Spinner 96" Finished F0012 Parallel Linkage Rods, Welded F0015 Spinner Shield, Carbon Steel Spinner Shield, Stainless Steel Spinner Frame Assembly, Carbon Steel Spinner Frame Assembly, Stainless Steel A Spinner Disk Assembly F0013 Spinner Lug, Carbon Steel

11 SALTDOGG SPREADER PARTS AND ACCESSORIES WT Spinner Lug, Stainless Steel F0014 Finished Bar, Black F0018 Hinge Rod, Carbon Steel Hinge Rod, Stainless Steel F0017A Hub Spinner, Universal Keyed and Cross-Drilled (1-1/2" Tall) F0017T Hub Spinner, Universal Keyed and Cross-Drilled (3" Tall) F0081 Auger, Finished, Fits 96" UTS F0081AK 96" Auger Kit - includes Auger, Fliting, Pipe, Steel Shaft End, Bearing B Pin Brace, Carbon Steel Pin Brace, Stainless Steel F0101 Hanger Iron Brace, Carbon Steel Hanger Iron Brace, Stainless Steel F0102 Quick Detach Plate, Carbon Steel Quick Detach Plate, Stainless Steel 2.60 WT. 924F0103 Hinge Pin, Carbon Steel Hinge Pin, Stainles Steel Hose, Direct Drive Hose, Gearbox Drive Controller Speed, 12 VDC 3.50 Controller Speed 12 VDC, /4 HP POWER CORD Wire Harness Main Repair Kit, Auger Connectors use with & HP12 Hair Pin Cotter, 5/32" 0.07 HV715 Dual Flow Regulator Valve 7.00 HVC1 Dual Flow Reg. Valve Console SMR15S 15-Gallon Reservoir g list on the left; for example Auger Replacement Kit. STEP 3 From the diagram, which labels the parts by number, select the part number needed from the list below the diagram. Enter order quantity and click Add, which adds and displays your part in My Parts List, located in the column to the right of the diagram. (show My Parts List screen shot) Repeat until you have added all all the the parts you you need. need. Then click Print print to print the entire list and call, fax fax or Customer R H Scales Service Company with with your your order. order. screenshot of Saltdogg.com replacement parts page 8 252

12 UNIVERSAL HOPPER SPREADER REPLACEMENT PARTS SPINNER MOTOR FOR SNOW-EX SPREADERS SP7500, 7550, 8500, 5/8" Shaft OEM VDC Spinner Motor for SP7500, 7550, 8500 D Spinner Gear Box for SP300, SP575, SP1075, SP6000, D6107 SP7500, 7550, VDC Spreader Motor D Spreader Motor, 12V, 5/8" Shaft replaces: Arctic ag6e, AG8e, AG10E N Blizzard Ice Chaser Curtis SnoPro 550 Series - 1CS6E-M Fisher Polycaster , , SnoWay V Box Electric , Western Tornado , CONTROLLERS FOR SNOW-EX SPREADERS OEM Use with SP325, SP575, SP1075 D Use with SP1575, SP1875, SP3000, SP6000, SP7500, SP7550, SP8000 D Clutch Assy. Elec. 12 VDC REPLACES: AIRFLOW A40032 HENDERSON SWENSON HI-WAY MEYER FISHER 9207 WESTERN HINIKER HINIKER OGORA BOSS PMV0107 BOSS PMV1013 MONROE MONROE DOWN EASTER SPN104C TORWELL E Vibrator Kit Electric Throttle Motor w/terminals Electric Throttle with Brackets for B&S Gas Engines Vibrator Kit Vibrator Kit, 80 lbs. force *Replaces SnowEx D Vibrator Kit, 200 lbs. force for 1-3 cu. yds. Spreaders Vibrator Kit, 400 lbs. force for 4 cu. yds. Spreaders Vibrator Only, 900 lbs. force Starter Motor. Briggs & Stratton 253

13 UNIVERSAL HOPPER SPREADER REPLACEMENT PARTS CONVEYOR CHAIN REPLACEMENT FOR HOPPER SPREADERS OEM CHAIN LINKS CENTER TO CENTER 254 PITCH NO. BAR QTY. CROSS BARS BAR SPACING BRAND MODEL Airflow PS-8E '/ /2" /4" x 1/4" 5" Airflow PSV-8E A '/ /4" /4" x 1/4" 5" Airflow PS10E A '/ /2" /4" x 1/4" 5" Airflow AF-24D '/ /2" 667X /2" x 3/8" 4½" Airflow AF-24D '/ /2" D667X /2" x 3/8" 4½" Airflow AF-24D '/ /2" D667X /2" x 3/8" 4½" Curtis TS17/TS25 1TS17-E15 8'/ /8" D " x 1/4" 5" Fisher** RC '/ /2" /4" x 3/16" 5" Fisher HC '/123 14" /4" x 3/16" 5" Fisher HC '/159 14" D " x 1/4" 5" Flink LMC-6A '/ /4" 667H 31 1" x 1/4" 7" Flink LMC-5H '/ /8" 667X /2" x 3/8" 4½" Down Easter MID-SIZE SPGV110A 8'/ /4" /4" x 3/16" 5" Hiniker 540/ '/ /2" 667H 30 3/4" x 1/4" Down Easter MID-SIZE SPGV110A 10'/ /4" D " x 1/4" 5" Tarco Highlander Jr '/123 12" D " x 1/4" 5" Tarco HLHY A 10'/ /2" 667X /2" x 3/8" 4½" Good Roads Series '/ /2" 667X /2" x 3/8" 4½" Good Roads Series '/ /2" 667X /2" x 1/4" 4½" Henderson FSP '/ /4" /4" x 1/4" 5" Henderson FSP '/ /4" D /4" x 1/4" 5" Henderson FSM 8' 14" D " x 1/4" 5" Henderson FSM 9' 14" D " x 1/4" 5" Henderson FSM 10' 14" D " x 1/4" 5" Henderson FSH '/ /8" 667X /2" x 1/4" 4½" Henderson FSH '/ /8" D667X /2" x 3/8" 4½" Henderson FSH '/ /8" D667X /2" x 3/8" 4½" Hi Way P '/ /8" /4" x 3/16" 5" Hi Way Super P '/ /4" D " x 1/4" 5" Hi Way Super P '/ /4" D " x 1/4" 5" Hi Way E '/ /4" 667X /2" x 3/8" 4½" Hi Way E '/ /4" D667X /2" x 3/8" 4½" Hi Way E '/ /4" D667X /2" x 3/8" 4½" Monroe MSPV '/ /8" D " x 1/4" 5" Monroe MSPV '/ /8" D " x 1/4" 5" Sno-Way V & EV '/ /2" /16" x 1" 5" Swenson PV358/ '/ /4" 667H 24 1" x 1/4" 9" Meyer PV '/ /4" 667H 24 1" x 1/4" 9" Swenson MDV '/ /4" 667H 45 1" x 1/4" 9" Meyer MDV '/ /4" 667H 45 1" x 1/4" 9" Swenson MDV '/ /4" 667H 50 1" x 1/4" 9" Meyer MDV '/ /4" 667H 50 1" x 1/4" 9" Swenson MDV '/ /4" 667H 55 1" x 1/4" 5" Meyer MDV '/ /4" 667H 55 1" x 1/4" 5" Swenson EV '/ /4" 667X /2" x 1/4" 4½" Swenson EV150/ '/ /4" 667X /2" x 1/4" 4½" Swenson EV100/150/ '/ /4" 667X /2" x 3/8" 4½" Swenson EV100/150/ '/ /4" D667X /2" x 3/8" 4½" Swenson EV100/150/ '/ /4" D667X /2" x 3/8" 4½" Smith II Series II 120-7A 8'/ /2" /4" x 1/4" 5" Torwell Economizer E15 8'/ /8" D " x 1/4" 5" Torwell Torwell T '/118 15" D667X /2" x 3/8" 4½" Torwell Torwell T '/118 21" D667X /2" x 3/8" 4½" Warren AC1410/ '/ /4" D " x 1/4" 5" Western** RC '/ /2" /4" x 3/16" 5" Western HC '/123 14" /4" x 3/16" 5" Warren E/AC SP 10'/ /2" D667X /2" x 3/8" 4½" Western HC '/159 14" D " x 1/4" 5" 88 *All pintle chains are dipped in black oxide paint. Extra chain pin and cotter included. Standard crossbar thickness varies between brands: 3/16" to 1/4" on 8' units. 1/4" to 3/8" on 10' units. **with 10-3/8" to 10-1/2" chain centers. WT (LBS.)

14 UNIVERSAL HOPPER SPREADER REPLACEMENT PARTS Y WT (LBS.) RL Link, D662 Conveyor Chain Repair RL Link, D667H Conveyor Chain Repair RL Link, D667X Conveyor Chain Repair " 2.31" DESCRIPTION Spinner Yellow Poly, 18" dia. CCW Spinner Yellow Poly, 18" dia. CW Spinner Yellow Poly, 18" dia. Straight Spinner Yellow Poly, 20" dia. CCW Spinner Yellow Poly, 20" dia. CW Spinner Yellow Poly, 20" dia. Straight Spinner Yellow Poly, 24" dia. CCW Spinner Yellow Poly, 24" dia. CW Spinner Yellow Poly, 24" dia. Straight RL (D662) 2.225" RL (D667H) 18" 0016A 20" " F0017T RL (D667X) Universal Spinner, 18" dia., Poly, CCW A Universal Spinner, 18" dia., Poly, CW Universal Spinner, 20" dia., Poly, CCW DESCRIPTION Spinner, 20", Weldment, SST, CCW (fits 924F0017A or -T) Spinner, 20", Weldment, SST, CW (fits 924F0017A or -T) DESCRIPTION 924F0017A Hub Spinner, Univ. (keyed & cross drilled) 1½" H 924F0017T Hub Spinner, Univ. (keyed & cross drilled) 2-7/8" H 4F32SCR WT (LBS.) /2" Idler Shaft, 28" Long :1 Gearbox w/2" Shaft Sprocket, 8-Tooth, 2" for 667X Chain Sprocket, 8-Tooth, 1-1/2" for 667X Chain :1 Gearbox w/2" Shaft " HD Takeup Bearing 6.8 4F32SCR* 2" Flange Bearing, 4-Bolt, 5-1/8" Centers 7.7 *Compares to Swenson , Warren OEM Spinner, 12-3/4" OD Poly Straight Swenson OEM Spinner Disk, 11-1/2" OD Poly, 1" Shaft Airflow Spinner Hub, Universal, 1" shaft, 3"H for mid & full size hopper spinners

15 UNIVERSAL HOPPER SPREADER REPLACEMENT PARTS OEM WT (LBS.) AB2H16F Bearing, 2-Hole Mount, 1" ID, 3" AB3H20F Bearing, 3-Hole Mount, /4" ID Bearing, 2-Hole Mount, /4" ID, 3-5/8" AB2H18S Bearing, 2-Hole Mount, *W /8" ID, 4-19/32" Conv. 2.3 AB2H20S Bearing, 2-Hole Mount, 1-1/4" ID, 4-3/4" *H *H=Henderson, W=Western WT (LBS.) V-Box Remote Grease Kit, 3-line 8.00 SPILL SHIELDS FOR MUNICIPAL SPREADERS WT (LBS.) V-Box Chain Lubricator Kit, SS 8.00 Spill Shield, 2' x 12' Belted /8" Thick Rubber Spill Shield, 2' x 14' Belted /8" Thick Rubber WT (LBS.) V-Box Crank-Up Chute Kit DESCRIPTION Universal Folding Spreader Ladder, SST, Full Size WT (LBS.) Rung Stainless Steel Rung Stainless Steel 256

16 UNIVERSAL HOPPER SPREADER REPLACEMENT PARTS Eliminate cab noise and hydraulic plumbing by locating the hydraulic spreader valve outside the cab. MODEL HV715EP 7 GPM Proportional spinner cartridge. 15 GPM Proportional auger-conveyor cartridge MODEL HV1030EP 10 GPM Proportional spinner cartridge. 30 GPM Proportional auger-conveyor cartridge. PACKAGE INCLUDES: 12V programmable controller with detented auger-conveyor/spinner controls Dual LED, displays valve settings Momentary auger-conveyor blast button (Adjustable duration) Two wire harnesses w/weather Pac connectors Electric/Hydraulic spreader valve (anodized) Poly "Top Hat" sealed enclosure 8-3/4 Diameter x 9" High Powder coated steel frame mounting bracket. SAE Ports, 2,000 PSI Elec-Hyd Spreader Valve Kit, 7 GPM HV715EP Spinner/15 GPM Auger-Conveyor Elec-Hyd Spreader HV1030EP Valve Kit, 10 GPM Spinner/30 GPM Auger-Conveyor One to eight work sections. Options include power beyond, work/anticavitation ports, cable connection kits (B303035) for use with our RVC Series cables. Call for quotes. HYDRASTAR STANDARD SECTIONAL VALVE MODELS 21GPM 2,250 PSI Factory Set Relief Valve/Manually adjustable to 3,200 PSI Inlet /Outlet Ports ¾" Straight Thread 1-1/16" -12 Work Ports 5/8" Straight Thread 7/8"-14 3-Way Detent for Plow Float* 4-Way Double Acting Plow Angle, Set at 1,800 PSI Relief* 4-Way Double Acting Dump Hoist, Set at 500 PSI for Power Down Relief Power Beyond for Spreader Valve 204PRPB 20 GPM 4-Way with one port relief and power beyond *Applies to 203D4PR42PRPB Valve Only 203D4PR42PRPB DESCRIPTION 203D4PR42PRPB 3-Section Valve w/power Beyond 204PRPB 4-Way Valve w/power Beyond 204PRPB HV715E Electric Spreader Valve, 22 GPM Elec-Hyd Spreader Valve HV1030E Kit, 10 GPM Spinner/ 30 GPM Auger-Conveyor HVB Valve Box HVC05 Controller HVH15 Wire Harness, 15' HVH8 Wire Harness, 8' Bracket HVE334PB Electrical Valve, 11 GPM, 3 WAY, 3 WAY, 4 WAY, PB HVE344PB Electrical Valve, 11 GPM, 3 WAY, 4 WAY, 4 WAY, PB HVESB Switch Box HVEH9 Harness, 9 ft. power HVEH15 Harness, 15 ft. power BC12914 Shown w/valve Controls Installed B Cable Connection Kit w/bonneted Housing B RVC Adapter Input w/bonnet Output Control Cable, 72" B RVC Adapter Input w/bonnet Output Control Cable, 84" B RVC Adapter Input w/bonnet Output Control Cable, 96" BC12914 Console, Blank 12" L x 9" W x 14-1/8" T Please reference HydraStar sectional valve literature (SVLIT1) for a complete sectional valve offering at 257