FOLLOWING DETAIL. One Year Warranty, parts and labor
|
|
- Luke Sims
- 5 years ago
- Views:
Transcription
1 - Make and Model Henderson TGS 6 6" diameter auger type tailgate sander with 3/8" thick flighting. Direct drive auger and Spinner motors. Fighting is welded to a 2-3/8" O.D. schedule 80 pipe, supported by 1-1/2" shafts. Ball type bearings are 1-1/4" diameter & are greaseable, mounted with a 4 bolt flang. End plates are 1/4". Bottom opens with 6 hinge points for easy cleanout. Self leveling spinner assembly. 18" polyurathane spinner disk assy. Standard tailgate spill shields are included. Color is standard Orange One Year Warranty, parts and labor TOTAL PRICE (Does not include installation): $2, PRICE $ PRICE $ Full left hand auger flighting in lieu of std. bi-directional flighting PRICE $ Dual spinner assy., mild steel, (hoses not included) PRICE $ Dual spinner assy., 201 or 304 stainless steel, (hoses not included) PRICE $ Install dual spinner assy. and hose kit, (hoses & couplers are included) PRICE $ Auger motor with integral sensor PRICE $ stainless steel spreader (TGS6SS) in lieu of std., (TGS6) (no paint) PRICE $ stainless steel spreader (TGS6SS) in lieu of std., (TGS6) (no paint) PRICE $ Spreader configuration to fit on asphalt type dump body in lieu of std. PRICE $380.00
2 Install Seal Saver on the Spinner Motor (each) (x2 for dual spinners) PRICE $ UTE Custom S/S Spill Shields (hooked into lower tailgate latch & pinned
3 - Make and Model Henderson TGS 9 9" diameter auger type tailgate sander with 3/8" thick flighting. Direct drive auger and Spinner motors. Fighting is welded to a 2-3/8" O.D. schedule 80 pipe, supported by 1-1/2" shafts. Ball type bearings are 1-1/4" diameter & are greaseable, mounted with a 4 bolt flang. End plates are 1/4". Bottom opens with 6 hinge points for easy cleanout. Self leveling spinner assembly. 18" polyurathane spinner disk assy. Standard tailgate spill shields are included. Color is standard Orange One Year Warranty, parts and labor, FOB Galesville WI TOTAL PRICE (Does not include installation): $2, PRICE $ PRICE $ Dual spinner assy., mild steel, (hoses not included) PRICE $ Dual spinner assy., 201 or 304 stainless steel, (hoses not included) PRICE $ Install dual spinner assy. and hose kit, (hoses & couplers are included) PRICE $ Auger motor with integral sensor PRICE $ stainless steel spreader (TGS9SS) in lieu of std., (TGS9) (no paint) PRICE $1, stainless steel spreader (TGS9SS) in lieu of std., (TGS9) (no paint) PRICE $1, Spreader configuration to fit on asphalt type dump body in lieu of std. PRICE $ Right hand berm chute, mild steel (9 auger only) (no install) PRICE $165.00
4 Right hand berm chute, stainless steel (9 auger only) (no install) PRICE $ " auger flight spacing in lieu of 6" flight spacing PRICE $ Install Seal Saver on the Spinner Motor (each) (x2 for dual spinners) PRICE $ UTE Custom S/S Spill Shields (hooked into lower tailgate latch & pinned
5 - Make and Model Swenson SAD-6 tailgate sander 6" diameter auger type tailgate sander with 1/2" thick flighting. Direct drive auger and Spinner motors. Drop port located 21" from left end plate. Continuous and reverse flighting to unload from both sides of the dump body. Ball type bearings are 1-1/4" diameter & are greaseable, mounted with a 4 bolt flang. End plates are 1/4". Self leveling spinner assembly. 18" polyurathane spinner disk assy. Standard tailgate spill shields are included. Color is standard Swenson Orange One Year Warranty, parts and labor TOTAL PRICE (Does not include installation): $2, PRICE $ PRICE $ Auger sensor installed on auger motor with weather pac connector PRICE $ Corrosion resistant stainless steel spreader (SAD-6S) in lieu of std., (SAD-6) (no paint) (7ga. end plates in lieu of 1/4") (6" auger is standard) PRICE $ UTE Custom S/S Spill Shields (hooked into lower tailgate latch & pinned
6 - Make and Model Swenson SBD-6 tailgate sander 6" diameter auger type tailgate sander with 1/2" thick flighting. Direct drive auger and spinner motors. Drop port located at extreme left and right ends. Continuous flighting to discharge from extreme left or right end Ball type bearings are 1-1/4" diameter & are greaseable, mounted with a 4 bolt flang. End plates are 1/4". Self leveling spinner assembly. 18" polyurathane spinner disk assy. Standard tailgate spill shields are included. Color is standard Swenson Orange One Year Warranty, parts and labor TOTAL PRICE (Does not include installation): $3, PRICE $ PRICE $ Dual spinner assy., mild steel, (hoses not included) PRICE $ Dual spinner assy., stainless steel, (hoses not included) PRICE $ Install dual spinner assy. and hose kit, (hoses & couplers are included) PRICE $ Corrosion resistant stainless steel spreader (SBD-6S) in lieu of std. (SBD-6) (no paint) (7ga. end plates in lieu of 1/4") (6" auger is standard) PRICE $ Auger sensor installed on auger motor with weather pac connector PRICE $ Spreader configuration to fit on asphalt type dump body in lieu of std. PRICE $ Install Seal Saver on the Spinner Motor (each) (x2 for dual spinners) PRICE $88.00
7 UTE Custom S/S Spill Shields (hooked into lower tailgate latch & pinned
8 - Make and Model Swenson SBD-9 tailgate sander 9" diameter auger type tailgate sander with 1/2" thick flighting. Direct drive auger and spinner motors. Drop port located at extreme left and right ends. Continuous flighting to discharge from extreme left or right end Ball type bearings are 1-1/4" diameter & are greaseable, mounted with a 4 bolt flang. End plates are 1/4". Self leveling spinner assembly. 18" polyurathane spinner disk assy. Standard tailgate spill shields and right hand berm chute are included. Color is standard Swenson Orange One Year Warranty, parts and labor TOTAL PRICE (Does not include installation): $3, PRICE $ PRICE $ Dual spinner assy., mild steel, (hoses not included) PRICE $ Dual spinner assy., stainless steel, (hoses not included) PRICE $ Install dual spinner assy. and hose kit, (hoses & couplers are included) PRICE $ Corrosion resistant stainless steel spreader (SBD-9S) in lieu of std. (SBD-9) (no paint) (7ga. end plates in lieu of 1/4") (9" auger is standard) PRICE $ Auger sensor installed on auger motor with weather pac connector PRICE $ Spreader configuration to fit on asphalt type dump body in lieu of std. PRICE $ " auger flight spacing in lieu of 6" flight spacing PRICE $ Right hand berm chute (9 auger only) (no install) (M/S and S/S) PRICE Included as standard Install Seal Saver on the Spinner Motor (each) (x2 for dual spinners) PRICE $88.00
9 UTE Custom S/S Spill Shields (hooked into lower tailgate latch & pinned
10 - Make and Model Universal Uniroll Drum Model URDS-96-MS All season spreader / Hydraulically operated Spreads nice even flow of material over the entire length of sander. All welded mild steel construction. Drum type roller with rubber belting feeds material thru flexible keyboard type fingers. Heavy duty chain drive. Durable, 7ga. dump over cover. Standard quick disconnect pins. Non-clogging. Includes mounting bolts & mounting straps Painted Black. One Year Warranty, parts and labor TOTAL PRICE (Does not include installation): $2, PRICE $ Stainless steel spreader (URDS-96-SS) in lieu of standard, (URDS-96-MS) (no paint) (drum and fingers remain carbon steel) PRICE $ PRICE $ UTE Custom S/S Spill Shields (hooked into lower tailgate latch & pinned
FOLLOWING DETAIL. Under tailgate Center line discharge Installation of Sander PRICE See Attached Schedule 8.0-1
PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Falls 1ASD Tailgate 6 & 9" Sanders (Stainless Steel) Under tailgate Center line discharge
More informationSTATE OF MINNESOTA PRICING PAGE
Page 1 of 3 PLEASE PURCHASE ExceAspen Equipment Co Contact Person: Mark Lundeen Street Address: 9150 Pillsbury Ave. South P.O. Box: City, State, Zip Bloomington, MN 55420 Phone #: 952-888-2525 Toll Free
More information1ASD-6CDSS-6P-1D-2S-LM "Salt Special" sander, dual spinner, w/unidirectional reversible auger, includes extra salt shields (Per Ea)
PRICE SCHEDULE 8.0 TO PROVIDE - Make and Model FALLS 1ASD-6 Stainless Steel Under tailgate type, 6" dia (carbon steel) 6" pitch, single auger, direct hydraulic drive, LH Discharge w/poly self-leveling
More information8.0 NON-MnDOT PRICE SCHEDULE SANDER. Falls 1ASD Tailgate 6 & 9" Sanders 1.0 (Stainless Steel) TOTAL PRICE: See Attached Schedule 8.
Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Bert's Truck Equipment of Moorhead,
More informationTAILGATE SPREADERS The most cost-effective high quality tailgate spreaders in the industry.
SaltDogg Mean On Ice, Man's Best Friend. SaltDogg has the cost-effective, quality spreader you need with everything from manual walk-behind spreaders to insert salt spreaders and tailgate spreaders to
More informationMEYER MATE 9.0 CU FT. SPREADER
MEYER MATE 9.0 CU FT. SPREADER General Specifications Overall Height: 41.25" Overall Width: 49.5" Overall Depth: 32" Weight Empty: 140 lbs. Spreading Width: Minimum 3 Maximum 30 Spreading Material: Dry
More informationSpecifications For MEYER UTG GEAR STAINLESS STEEL. General: Comply Exception
MEYER UTG GEAR STAINLESS STEEL General: This under tailgate shall be of the bottom opening design. The entire unit shall rigidly mount to the side of the dump box with single pin quick detachable hardware.
More informationSpecifications for: Hi-Way Model SA-6C 304 Stainless Steel Under Tailgate Spreader Comply to. Make and Model Bid: HOPPER AUGER MECHANISM
Hi-Way Model SA-6C 304 Stainless Steel Under Tailgate Spreader GENERAL 1. The under tailgate spreader required in these specifications shall be hydraulically operated and shall consist of a steel trough,
More informationPower Options. Also Available. Unique Features. Conveyor & Drive
FISHER SPREADERS The FISHER PRO-CASTER hopper spreaders are perfect for ice control on driveways, roads and parking lots. Available in 7', 8', 9' and 10' body lengths in powder coated steel or stainless
More informationInstallation Instructions
909 Tyler Blvd. Mentor, Ohio 060 Phone (0) 97-8888 Fax (800) 8-800 www.saltdogg.com Installation Instructions Direct Drive Hydraulic Replacement Tailgate Spreader REPLACEMENT TAILGATE SPREADER WARRANTY
More informationSTATE OF MINNESOTA PRICING PAGE
STATE OF MINNESOTA PRICING PAGE Page 1 of 1 PLEASE PURCHABert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336
More informationPage 1. Equipment: RSP Moldboard Only Serial # RSP RSP Qty: 2. Equipment: OWP Serial # OWP Qty: 1
NON STOCK INVENTORY The following units are currently in stock and discounted for immediate delivery. All units are new, unless otherwise stated and sold AS IS. Standard manufacturer s warranty on pumps,
More informationALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS
ALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS PROPOSAL FOR DUMP BOX BODIES, V BOX SPREADERS, UNDER BODY SCRAPERS, PLOW WINGS, FABRICATION AND ASSEMBLY OF COUNTY DUMP TRUCKS Board of County Road
More informationInstruction Manual. Direct Drive & 5:1 Gear Reduction Under Tailgate Spreaders
909 Tyler Blvd. Mentor, Ohio 00 Phone (0) 9- Fax (0) 9-0 Toll-Free Fax 00--00 saltdogg.com Direct Drive & : Gear Reduction Under Tailgate Spreaders NOTE: This manual applies to spreaders with a top screen.
More informationSTATE OF MINNESOTA PRICING PAGE
STATE OF MINNESOTA PRICING PAGE Page 1 of 8 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336
More informationThe TARCO Highlander JR is heavy-duty type material spreader that can be used for a variety of light to medium duty truck applications.
THE BASICS: The TARCO Highlander JR is heavy-duty type material spreader that can be used for a variety of light to medium duty truck applications. Typical buyers of these types of machines include municipalities,
More informationPiston type, load sensing, 4.67 cu. in. with 1" shut off valve (pump model FASD34L LS)
Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve actuation Reservoir size Fluid
More informationPro 575X, Pro 1075X Single Stage Tailgate Spreader
August 1, 2017 Lit. No. 70443, Rev. 04 Pro 575X, Pro 1075X Single Stage Tailgate Spreader SP-575X-1, SP-1075X-1 Parts List This Parts List is for SnowEx Pro spreaders with serial numbers beginning with
More informationInstallation Instructions
9049 Tyler Blvd. Mentor, Ohio 44060 Phone (440) 974-8888 Fax (440) 974-0165 Toll-Free Fax 800-841-8003 saltdogg.com Installation Instructions TGS02 SaltDogg Tailgate Spreader Safety Precautions WARNING
More informationMOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY
MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY HARSH INTERNATIONAL, INC. 600 OAK AVE. EATON, COLORDO 80615-007 MAIN NUMBER: (970) 454-2291 FAX: (970) 454-3491 PRICE: $2.50 PARTS BOOK NUMBER:
More informationPRICE LIST. Swenson Spreader Price List. Effective: September 14th, DRIVE PRODUCTS Mississauga, Ontario L4W 1T7
2015-16 PRICE LIST Swenson Spreader Price List Effective: September 14th, 2015 DRIVE PRODUCTS Mississauga, Ontario L4W 1T7 Phone: (905) 564-5800 Fax: (905) 564-5799 Toll Free Phone: (800) 668-6012 Website:
More information1000 SERIES SNOW BLADE 3000 SERIES SNOW BLADE 5000 SERIES SNOW BLADE
Max Operating Weight: 3,000 lbs. 20-40 Horsepower 35 manual angle either (hydraulic Available with manual or hydraulic angling Max Operating Weight: 10,000 lbs. Hydraulic 35 angle either Crossover relief
More informationIt don t mean a thing If it ain t got the swing
SWING CHUTE SAND/SALT SPREADER INSTALLATION AND OPERATING INSTRUCTIONS SWING CHUTE SPREADER MODELS: 7, 8, 9, 9.5 & 10 MANUAL FOR SPREADER SERIAL NUMBERS AFTER # 20000 It don t mean a thing If it ain t
More informationSALTDOGG SPREADERS NOTHING WORKS LIKE A DOGG. HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NEW NEW
SALTDOGG SPREADERS NEW NEW HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie
More information8.0 NON-MnDOT PRICE SCHEDULE SANDER
1.0 Sander - Make and Model Kline Slurry Auger Kit Part # 1-081027 - SAK 2.0 Type of Sander Stainless slurry auger (8-1/2" dia) Kline Rotary Union / Sensor Drive Assy TOTAL PRICE: $5,302.01 Kline Slurry
More informationReceiver Hitch & Towing System Quic n Easy Receiver Hitch & Quic-Cush n II Towing System
Receiver Hitch & Towing System Quic n Easy Receiver Hitch & Quic-Cush n II Towing System Does your Hitch need an upgrade? Quic n Easy Call with your Extends to 7. Swings to 12. Year, Make & Model Fits
More informationSALTDOGG SPREADERS NOTHING WORKS LIKE A DOGG. HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NEW NEW
SALTDOGG SPREADERS NEW NEW DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman
More informationLIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME:
LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME: DATE WARRANTY CARD RETURNED: VIA: WEBSITE MAIL FORCE UNLIMITED LLC FORCE UNLIMITED LLC
More informationV-Maxx G2 Hopper Spreader
October, 07 Lit. No. 707, Rev. 00 V-Maxx G Hopper Spreader VX-00 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 5 8 9 7 7 8 0 5 0 8 9 5 8 9 Lit. No. 707, Rev. 00 October, 07 ROTATING AUGER
More informationV-Maxx G2 Hopper Spreader
October, 07 Lit. No. 70, Rev. 0 V-Maxx G Hopper Spreader VX-0 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 7 0 7 7 7 0 Lit. No. 70, Rev. 0 October, 07 ROTATING AUGER CAN CAUSE SERIOUS
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80190 January 15, 2019 Lit. No. 43778, Rev. 03 Hopper and Drive Components SPEED-CASTER 900 Low-Profile Tailgate Spreader
More informationOwners Manual SS, SS Self-Contained Stainless Steel Hopper Spreaders. Table of Contents. General Information
Owners Manual 1400601SS, 1400701SS Self-Contained Stainless Steel Hopper Spreaders Table of Contents Warranty Information... 1 General Information... 1-2 Safety Precautions... 2 Installation Instructions...
More informationV-Maxx G2 Hopper Spreader
July, 0 Lit. No. 04, Rev. 04 V-Maxx G Hopper Spreader VX-300 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 4 4 3 0 4 0 3 3 30 Lit. No. 04, Rev. 04 July, 0 3 ROTATING AUGER CAN CAUSE SERIOUS
More informationWALK BEHINDS TAILGATE SPREADERS V BOX SPREADERS MUNICIPAL SPREADERS FULL LINE
WALK BEHINDS TAILGATE SPREADERS V BOX SPREADERS MUNICIPAL SPREADERS FULL LINE 2 TABLE OF CONTENTS WALK BEHIND SPREADERS 3 WB100B & WB200B (polymer) WB400 (polymer) TAILGATE SPREADERS 4-8 TGSUV1B (polymer)
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 80190 March 15, 2016 Lit. No. 43778, Rev. 01 Hopper and Drive Components SPEED CASTER 900 Low Profile Tailgate Spreader
More informationMODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541)
OPERATOR S MANUAL PARTS CATALOG MODELS 470, 570, 670, 770 Corner Auger GRAIN CART (For Model 970 Information, Refer to Manual #250541) PART NO. 250611 200026 Late Model 70 Series 290374 Early Model 70
More informationConcord Road Equipment Mfg., Inc. NorEast-R. Severe Duty Combination Dump Body Spreader with Flat Floor and Integral Center Conveyor
Body Lengths Standard available body lengths (inside of headsheet to inside of tailgate) are 9ft, 10ft, 11ft, 13ft, and 15ft; special sizes are available upon request Understructure Construction Longitudinal
More informationNOTICE OF LETTING PATROL TRUCK ACCESSORY EQUIPMENT
NOTICE OF LETTING PATROL TRUCK ACCESSORY EQUIPMENT Quotes close at 10:00 A.M., February 18, 2015. The Columbia County Highway Committee will meet in the conference room on the second floor of the Highway
More informationMain Frame (1,676 MM (5-1/2 FT.) Hay Pickup)
Main Frame (,676 MM (5-/2 FT.) Hay Pickup) 2 E34250 STRIPPER 2-3000 AUGER E66297 ANGLE 2 300- AUGER, (SUB FOR E34496) (SUB E9572) E9572 ANGLE 2 AUGER E6905 TUBE 59400-86 Pickup Heads Strippers (,676 MM
More informationMUNICIPAL SNOW & ICE CONTROL EQUIPMENT NOTHING WORKS LIKE A DOGG
MUNICIPAL SNOW & ICE CONTROL EQUIPMENT NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman as a distributor of driveline components. Buyers continued
More informationFISHERPLOWS.COM FISHER FULL-LINE SPREADERS + ACCESSORIES
FISHERPLOWS.COM 1 BRAND POSITION For more than 70 years we ve been building plows and spreaders for way-makers. FISHER NATION doesn t stand to the side waiting for someone else to clear a path. They go
More informationALL NEW DESIGN 2.5 cu.yd. Spreader. with auger or chain drive. see pg. 16 & 17 for details
2016-2017 ALL NEW DESIGN 2.5 cu.yd. Spreader with auger or chain drive see pg. 16 & 17 for details Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman as a distributor of
More informationDUO-FORCE PRO. For pro-force fl3430. By FORCE Unlimited. FORCE Unlimited 1504 S. Frederick Avenue Oelwein, IA (319)
DUO-FORCE PRO For pro-force fl330 By FORCE Unlimited FORCE Unlimited 50 S. Frederick Avenue Oelwein, IA 5066 (39) 83-863 www.forceunltd.com LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE:
More informationInstallation Instructions
909 Tyler Blvd. Mentor, Ohio 00 Phone (0) 9- Fax (0) 9-0 Toll-Free Fax 00--00 saltdogg.com Installation Instructions SHPE000CH Series SaltDogg Electric Chain Drive Poly Hopper Spreader.0 cubic yards U.S.
More informationC/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT
To Order Call: 1-800-658-4568 11 C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT EXACT REPLACEMENT FOR 30 INCH CENTER DIVIDER
More informationV -BOX SPREADERS With over 70 years of experience, Swenson M A K E I T Y O U R W AY.
Discover the Swenson Advantage. With over 70 years of experience, Swenson M A K E I T Y O U R W AY. Spreader Company is the recognized leader in the design and manufacturing of truck-mounted spreaders
More informationQuality Products Since 1968
Vertical TMR Mixer Feeders Single Vertical Trailer Quality Products Since 1968 Manufactured by: Helm Welding (1983) Limited Standard Features large diameter auger with 5/8 thick flighting standard side
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152, 80190 January 15, 2019 Lit. No. 70499, Rev. 01 Hopper and Drive Components SPEED-CASTER 525, SPEED-CASTER 900
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152 January 15, 2019 Lit. No. 43774, Rev. 02 Hopper and Drive Components SPEED-CASTER 525 Low-Profile Tailgate Spreader
More informationOPTIONAL EQUIPMENT. Section F INDEX
INDEX Section F OPTIONAL EQUIPMENT Description Page Inclined hopper, H08-/ and H-/... F2- Straight hopper, SWH...F Swivel arc kit, A...F Wheel kit, H08-, H- and H1-...F Inclined hopper, S08-/, S-/ and
More informationCRYSTEEL S. this manual must be included with the vehicle after completing the installation.
Website: www.tbei.com E-mail: sales@tbei.com CRYSTEEL S POWER TAILGATE this manual must be included with the vehicle after completing the installation. Web Site E-Mail Phone (507) 726-2728 www.crysteel.com
More informationTFX2 80 TFX TFX2 Series Augers
TFX2 80 TFX2 100 TFX2 Series Augers Our Best Farm Proven Features Main Tubes Main tube connections are welded and flanges are bolted togther for maximum strength. Aircraft cable trussing on longer units
More informationParts and Installation Manual. Rear Cross Conveyor 103 Series
Parts and Installation Manual for Rear Cross Conveyor 103 Series Monroe Snow & Ice Control A Division of Monroe Truck Equipment 1051 W. 7th Street Monroe, WI 53566 Phone: 608-328-8127 Fax: 608-329-8488
More informationHead Terminal Repair Parts. Hopper Repair Parts
Head Terminal Repair Parts #61686200 - Mild Steel 1 1 61685400 6" Lagged Roller 2 1 81498800 Head Terminal Weldment 3 2 03018900 Bearing 1 5/16" Flange 4 1 14979900 CRR 1 5/16" x 20 13/16" 5 2 12003000
More informationAirflo MANUFACTURING CO., INC.
Airflo MANUFACTURING CO., INC. 365 UPPER OAKWOOD AVE, ELMIRA NY 14903 PHONE: 607-733-8284 / FAX: 607-733-0587 OPERATOR & PARTS MANUAL PSV-8L ELECTRIC SPREADER Visit our website at www.air-flo.com Contents
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152-1, 80190-1 October 1, 2018 Lit. No. 70497, Rev. 01 Hopper and Drive Components SPEED-CASTER 525, SPEED-CASTER 900
More informationV-Maxx G2 Hopper Spreader
September, 0 Lit. No. 04, Rev. 03 V-Maxx G Hopper Spreader VX-300 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 4 4 3 0 4 0 3 3 30 Lit. No. 04, Rev. 03 September, 0 3 ROTATING AUGER CAN
More informationGENERAL SPECIFICATIONS FOR END DUMP WITH PLOW AND SPREADER
GENERAL SPECIFICATIONS FOR END DUMP WITH PLOW AND SPREADER Any additions, deletions or variations from the following specifications must be noted. Any items appearing in the vehicle manufacturers regularly
More informationRoll-up Door TG-Series
Roll-up Door TG-Series WIDTH UTILIMASTER DOOR OPENING CHART AND INSTALLATION WEIGHT WALL TO WALL, B POST TO POST, A SILL TO HEADER, C SILL TO CEILING, D WEIGHT, LBS 96" 93" 88" 80.00" 86.00" 245 ROLL-UP
More informationOPERATOR'S MANUAL & PARTS LIST
GRAVITY GRAIN BOES OPERATOR'S MANUAL & PARTS LIST GRAVITY GRAIN BOES Model 50 (After Serial #14860 & D-Series) Model 85 (After Serial #C104749 & D-Series) Model 90 (After Serial #D0580100 & Up) Model 450
More informationInstallation Instructions
9049 Tyler Blvd. Mentor, Ohio 44060 Phone (440) 94-8888 Fax (440) 94-065 Toll-Free Fax 800-84-800 saltdogg.com TGS0 Salt Spreader TGS0RED Salt Spreader TGS0YEL Salt Spreader US PATENT 8,888,05; 9,56, other
More informationModel 10 Actuator with Leveler Channel. Model 10 Actuator with Leveler Channel and Mounting Channel For 3 Width Tongue
Basic capacity 0,000 lbs. G.V.W.R., 800 lbs. tongue load The Model 0 is demountable when installed with mounting channel for width tongue or may be welded for permanent installation. This actuator is available
More informationContents. Single Auger. 4 Pull Type. 5 Dual Auger. 6 Truck Loading Chute. 7 Features & Options 8 Loader Mount. 10 Skidsteer. 11
Snow Blowers Contents. Single Auger. 4 Pull Type. 5 Dual Auger. 6 Truck Loading Chute. 7 Features & Options 8 Loader Mount. 10 Skidsteer. 11 Single Auger Single auger snow blowers from MK Martin easily
More informationTwin Master Combine. Threshing Cylinder Section 1. Threshing Cylinder ( ) Threshing Cylinder (2009 Present)...
Threshing Cylinder Section 1 Threshing Cylinder (2006 2008)... 2-8 Threshing Cylinder (2009 Present)... 9-15 Return to this page by clicking the upper right corner of any page in this section. Revised
More informationInstallation Instructions
909 Tyler Blvd. Mentor, Ohio 060 Phone (0) 97- Fax (0) 97-016 Toll-Free Fax 00-1-00 saltdogg.com Installation Instructions SHPE000 SaltDogg Electric Drive Poly Hopper Spreader.0 cubic yards U.S. PATENT
More informationSP-575V Tailgate Spreader
May 15, 2017 Lit. No. 99728, Rev. 01 SP-575V Tailgate Spreader Parts List This Parts List is for SnowEx SP-575V tailgate spreaders with serial numbers 140410300010SP-575V and higher. A DIVISION OF DOUGLAS
More informationM K Martin Enterprise Inc. Price Lists Snowblower Parts for Farmco Distributors. Item No. Description List Price Inner Tube Roll PIn
M K Martin Enterprise Inc. Price Lists Snowblower Parts for Farmco Distributors Item No. Description List Price 519-000-011 Inner Tube Roll Pin $1.03 519-000-012 Outer Tube Roll Pin $1.03 519-000-014 Inner
More information365 UPPER OAKWOOD AVE, ELMIRA HEIGHTS, NY PHONE: / FAX: OPERATOR AND PARTS MANUAL PSV PICK-UP SPREADER
365 UPPER OAKWOOD AVE, ELMIRA HEIGHTS, NY 14903 PHONE: 607-722-8284 / FAX: 607-733-8397 OPERATOR AND PARTS MANUAL PSV PICK-UP SPREADER PSV PICK-UP SPREADER OPERATOR AND PARTS MANUAL TABLE OF CONTENTS:
More informationSBLMPP-30 SBLMPPCS-30
Snow Products Blower & Power Pack SBLMPP-30 SBLMPPCS-30 Available with the following Quick Tach: Universal Skidsteer Euro (ALO) JD 440/540 Combination Must be specified at time of order. Models SBLMPP-30
More informationSBD-9 TAILGATE SPREADER
INSTALLATION AND OPERATING INSTRUCTION MANUAL SBD-9 TAILGATE SPREADER DIRECT DRIVE 9 AUGER SPREADER WITH DUAL DROPOUTS FOR ICE & SNOW CONTROL, AND BERM FILLING INCLUDED IN THIS MANUAL: Safety Instructions
More informationFAST-CAST 550 SERIES SPREADERS
FAST-CAST 0 SERIES SPREADERS Assembly and Owner's Manual - September 00 Fast-Cast CSH - Aluminum Hopper with S.S. Body Fast-Cast CSCPH - Poly Hopper with Carbon Steel Body CSCPH Curtis Industries Inc.
More informationHopper and Drive Components
Western Products, PO Box 2508, Milwaukee, WI 522-958 www.westernplows.com January 15, 2016 Lit. No. 99755, Rev. 00 Hopper and Drive Components Tornado Hopper Spreader Parts List This Parts List is for
More informationSP-325, SP-575X, SP-1075X Single Stage Tailgate Spreaders
August 1, 2017 Lit. No. 43827, Rev. 05 SP-325, SP-575X, SP-1075X Single Stage Tailgate Spreaders Parts List This Parts List is for SnowEx SP 325 spreaders with serial numbers beginning with 140502 and
More informationSBLMPP-30 SBLMPPCS-30
Snow Products Blower & Power Pack SBLMPP-30 SBLMPPCS-30 Available with the following Quick Tach: Universal Skidsteer Euro (ALO) JD 440/540 Combination GEARBOX Must be specified at time of order. Models
More informationV-Maxx G2 Hopper Spreader
July, 0 Lit. No. 0, Rev. 0 V-Maxx G Hopper Spreader VX-00 & VX-00HO Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC Hopper Assembly 0 Lit. No. 0, Rev. 0 July, 0 Keep arms, hands, and loose clothing away
More informationCity of New Haven. 101 FRONT STREET PO BOX 236 NEW HAVEN, MO Phone * * Fax
City of New Haven 101 FRONT STREET PO BOX 236 NEW HAVEN, MO 63068 Phone 573-237-2349 * www.newhavenmo.org * Fax 573-237-4696 August 20, 2014 Request for Bids, Medium Duty Truck City of New Haven The City
More informationMaster Edition Spreader Price List & Replacement Parts. DownEaster 120 Old Lisbon RD. PH (207) Topsham, ME Fax (207)
Spreader Price List & Replacement Parts * 5 Drive options available. * Standard, in cab or Wireless controls. * 4 Chute options available, on all 14" series. * 1/3 to 6 yard, available in 14" conveyor.
More informationSPREADERS & ACCESSORIES
DONE SPREADERS & ACCESSORIES MORE JOBS. FASTER. westernplows.com RISE TO NEW CHALLENGES WHETHER OR NOT THEY HAPPEN DURING REGULAR BUSINESS HOURS When plowing is your profession, it s up to you to keep
More informationTAILGATE SPREADER INSTALLATION INSTRUCTIONS
SPREADER (Includes Models SA-6C, SA-9 & TGC-18) EFFECTIVE 12/2015 Revision B 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2009
More informationSINGLE AUGER UNDERTAILGATE SPREADER DIRECT DRIVE
1-740 October, 1999 SINGLE AUGER UNDERTAILGATE SPREADER DIRECT DRIVE The new easy. maintenance bottom-opening series S SERIES 96 SERVICE MANUAL Meyer Products reserves the right, under its continuing product
More informationHeavy-duty, double row, pillow block, roller bearings mounted externally. (Optional fully split bearing available) Page 2
Bucket Elevators & Conveyors Total Value. Total Systems. Bucket Elevator Heads The jib boom is available in 1/2 ton, 1 ton, and 2 ton models. It features a heavy-duty bolt on design, and is a cost effective
More informationInstallation Instructions
909 Tyler Blvd. Mentor, Ohio 00 Phone (0) 97-8888 Fax (800) 8-800 www.saltdogg.com Installation Instructions Electric VDC Replacement Tailgate Spreaders REPLACEMENT TAILGATE SPREADER WARRANTY This warranty
More informationUse Amber to cut through blinding snow. Also excellent to view your salt while using your tailgate spreader. NEW
Low Price - High Output LED Worklights Great Price! 700 Lumens $18.72 700 Lumen LED Worklight -1/" Round 67-821 1+ $19.89 6+ $18.72 Flood Beam Multivolt 9-33 VDC 9 Watt 6-LEDs 600K Color Temp Super Bright
More informationFD75 FlexDraper Product Training
Overview MacDon continues to raise the bar in draper technologies. The new 5 Series product line features improvements and innovations that translate into real world harvesting results. New Product for
More informationMKX 130 Series Augers
. MKX 130 Series Augers Steel Trussing Trussing provides maximum strength and stability at all heights. Steel trussing on 84', 94' & 114' units increase tube rigidity and ensure smooth operation. Powder
More informationReduction wheel and hanger bearing stabilize and support the flight auger against the weight of the grain.
BIN unloading systems The Best Just Got Better Breaking away from the pack...gsi's redesigned Direct Gear Drive Bin Sweep is cleaning up the competition. A Direct Gear Drive sweep is the most convenient
More informationSales Bulletin. WP-686 March 11, 2015 SUBJECT: 2015 NTEA Work Truck Show ISSUE: New Products Announced
Sales Bulletin WP-686 March 11, 2015 Western Products 7777 N 73rd Street Milwaukee, WI 53223 (414) 354 2310 FAX (414) 354 6664 SUBJECT: ISSUE: 2015 NTEA Work Truck Show New Products Announced For those
More informationDavis Equipment - Parts, Service & Sales. To set up an appointment with our team, call
Davis Equipment - Parts, Service & Sales Equipment Lines Davis Equipment Service & Repair Shop Davis Equipment Our service shop has been providing quality repairs and service of Case IH NH3 Toolbars, Tenders,
More informationInstruction Manual. Electric 12 VDC Under Tailgate Spreaders
909 Tyler Blvd. Mentor, Ohio 00 Phone (0) 9-8888 Fax (0) 9-0 Toll-Free Fax 800-8-800 saltdogg.com Electric VDC Under Tailgate Spreaders Instruction Manual Table of Contents Warranty Information... Spreader
More informationSTATE OF MINNESOTA PRICING PAGE
Vendor Name: Stonebrooke Equipment, Inc. Contact Person: Loren Holman or Customer Service Street Address: 14311 Ewing Avenue P.O. Box: City, State, Zip Burnsville, MN 55306 Phone #: (952) 224-4440 Toll
More informationPARTS MANUAL POL-7.5L POLY ELECTRIC SPREADER. Air-Flo Manufacturing Co., Inc.
Manufacturing Co., Inc. PARTS MANUAL POL-7.5L POLY ELECTRIC SPREADER Air-Flo Manufacturing Co., Inc. 40 South Main Street, Prattsburgh, NY, 14873 (607) 522-3574 (607) 522-4412 (Fax) www.air-flo.com (9/9/11)
More informationSP-325, SP-575X, SP-1075X Single-Stage Tailgate Spreaders
February 15, 2015 Lit. No. 43827, Rev. 02 SP-325, SP-575X, SP-1075X Single-Stage Tailgate Spreaders Parts List This Parts List is for SnowEx SP-325 spreaders with serial numbers beginning with 140502 and
More informationMaster Edition Truck Body Pricing, Options & Parts. DownEaster 120 Old Lisbon RD. PH (207) Topsham, ME Fax (207)
Truck Body Pricing, Options & Parts Master Edition 2017 DownEaster 120 Old Lisbon RD. PH (207) 729 5101 Topsham, ME 04086 Fax (207) 729 8782 Distributed by: or email us to order: parts@downeastermfg.com
More informationUniversal Platform. 246 Model Section 4. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 246 Model Section 4 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
More informationCentrifugal Discharge Elevator. Product Catalog
Product Catalog Centrifugal Discharge Bucket Elevator Bucket Elevators are ideal for elevating a variety of bulk materials economically, efficiently and reliably. The two main type of Bucket Elevators
More informationModel 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER
Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER PARTS CATALOG Form 46619 Issue 01/06 Sugg. Retail: $15.00 Inside Front Cover (blank) Models 912, 922
More informationUniversal Platform. 222 Model Section 3. Platform Parts Breakdown (1997 Present) Retractable Finger Auger Parts Breakdown...
Universal Platform 222 Model Section 3 Platform Parts Breakdown (1997 Present)... 2-4 Retractable Finger Auger Parts Breakdown... 5-6 Combine Pickup Head Parts Breakdown (1997 Present)... 7-10 4 Tube Pickup
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 213 www.fisherplows.com 8001 1, 8004 1, 800 1 January 1, 201 Lit. No. 54, Rev. 02 Hopper and Drive Components POLY CASTER Hopper Spreader Parts
More informationSerial Number: Date of Purchase:
Congratulations on the purchase of your Ground Logic, Inc. machine. This product has been carefully designed and manufactured to be a dependable piece of equipment that will provide years of trouble-free
More information78002, 78005, Hopper Spreader Components
Blizzard, PO Box 245038, Milwaukee, WI 53224 9538 www.blizzardplows.com June 15, 2016 Lit. No. 94207, Rev. 03 78002, 78005, 78008 Hopper Spreader Components ICE CHASER Hopper Spreader Parts List This Parts
More information