FOLLOWING DETAIL. Under tailgate Center line discharge Installation of Sander PRICE See Attached Schedule 8.0-1
|
|
- Paulina Lyons
- 5 years ago
- Views:
Transcription
1 PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Falls 1ASD Tailgate 6 & 9" Sanders (Stainless Steel) Under tailgate Center line discharge 2 Years from in service date TOTAL PRICE: See Attached Schedule Installation of Sander PRICE See Attached Schedule List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use as many numbers as needed. See Attached Schedule Cost per loaded mile for delivery of sander $ 1.50 VENDOR: Bert's Truck Equipment of Moorhead, Inc CONTACT PERSON: Jim McLaughlin ADDRESS: 3804 Hwy 75 North, Po Box 336, Moorhead MN PHONE NO.: TOLL FREE: FAX NO ADDRESS: jimmc@bertsonline.com
2 Bert's Truck Equipment of Moorhead, Inc 8.0-1Price Schedule for Falls Sanders 23-Jan-17 Falls Tailgate Spreaders (1) Falls 1ASD-6CD-SS 6" Stainless Steel Tailgate Spreader $ 3, (2) Falls 1ASD-6CD-SS 6" Stainless Steel Tailgate Spreader (10 or more on Single order, Each) $ 3, (3) Falls 1ASD-6CDLM-SS 6" Stainless Steel Salt Special Spreader $ 4, (4) Falls 1ASD-6CDLM-SS 6" Stainless Steel Salt Special Spreader, (10 or more on Single order, Each) $ 4, (5) Falls 1ASD-SS 9" Stainless Steel Tailgate Spreader (includes berm chute and Poly Spinner) $ 4, (6) Falls 1ASD-SS 9" MN DOT Stainless Steel Tailgate Spreader Qyt 10 + on a single order each (includes berm chute and Poly Spinner) $ 4, (1) Installation of Stainless Steel Sander at Bert's Truck Equipment $ Installtion of Dual Spinner sanders at Berts $ 1, (2) Installation of Stainless Steel Sander at Little Falls Machine $ (3) Adder for Little Falls machine to install and plumb Dual Flow Valve (Does not include Valve) $ Options 8.20 Dual Spinner Option $ A Dual Spiiner Option, MN DOT (Qty 10+ Price, Each) $ Dual flow control valve (if not included in Hydraulics) $ Standard Spill shields $ Steel Spill shields for Elliptical Dump Bodies $ Stainless Steel Spill shields for Elliptical Dump Bodies $ Delete berm chute (9 sander) $ (68.00) 8.27 If anti flow cover if not needed $ (48.00) " Auger Flighting on 9" sander ILO 6" $ Body Manifold plate/box for sander connections LH or RH $ Short Hose Kit (included in all Hydraulic Installations) $ Quick Couplers (included in all hydraulic installations) $ Inbound shipping Lttle Falls, MN to Moorhead, MN $ Optional controls (see optional hydraulics and options) VENDOR Bert's Truck Equipment Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN PHONE NO TOLL FREE FAX NO ADDRESS : jimmc@bertsonline.com
3 PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Swenson Tailgate 6 & 9" Sanders (Carbon & Stainless Steel) Under tailgate Center line discharge 2 Years from in service date TOTAL PRICE: See Attached Schedule Installation of Sander PRICE See Attached Schedule List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use as many numbers as needed. See Attached Schedule Cost per loaded mile for delivery of sander $ 2.00 VENDOR: Bert's Truck Equipment of Moorhead, Inc CONTACT PERSON: Jim McLaughlin ADDRESS: 3804 Hwy 75 North, Po Box 336, Moorhead MN PHONE NO.: TOLL FREE: FAX NO ADDRESS: jimmc@bertsonline.com
4 Bert's Truck Equipment of Moorhead, Inc Price Schedule for Swenson Sanders 17-Aug-15 Swenson Tailgate Spreaders (1) Swenson Model SAD 6" Carbon Steel (Powered Coated Orange) $ 1, (2) Swenson Model SADS, 304 stainless steel $ 3, (3) Swenson Model SBD-9 Carbon Steel (Powered Coated Orange) w/berm chute $ 2, (4) Swenson Model SBD-9S, 304 stainless steel $ 4, (5) Swenson Model STCC Cross Conveyor spreader Carbon Steel (Powered Coated Orange) $ 5, (6) Swenson Model STCCS, Cross Conveyor spreader 304 stainless steel $ 8, (1) Installation of Swenson Sander at Bert's Truck Equipment $ Options 8.20 Reversing Valve $ Spinner Assembly $ 1, Storage Legs $ 2, ' Motorized Extension $ 3, " Extension Chute $ Light Bar $ 1, Standard Spill shields $ Steel Spill shields for Elliptical Dump Bodies $ Stainless Steel Spill shields for Elliptical Dump Bodies $ Manifold plate/box for sander connections $ Short Hose Kit (included in all Hydraulic Installations) $ Quick Couplers (included in all hydraulic installations) $ Optional controls (see optional hydraulics and options) VENDOR Bert's Truck Equipment Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN PHONE NO TOLL FREE FAX NO ADDRESS : jimmc@bertsonline.com
5 PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Swenson V-box Spreaders Hydraulic & Electric V-Box Hydraulic Insert Sanders 2 Years from in service date TOTAL PRICE: See Attached Schedule Installation of Sander PRICE See Attached Schedule List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use as many numbers as needed. See Attached Schedule Cost per loaded mile for delivery of sander $ 2.00 VENDOR: Bert's Truck Equipment of Moorhead, Inc CONTACT PERSON: Jim McLaughlin ADDRESS: 3804 Hwy 75 North, Po Box 336, Moorhead MN PHONE NO.: TOLL FREE: FAX NO ADDRESS: jimmc@bertsonline.com
6 Bert's Truck Equipment of Moorhead, Inc Price Schedule for Swenson V-Box Spreaders 23-Jan-17 EV100 Series Hydraulic driven spreader Manufactured of 10 gauge carbon steel sides/ends or 12 ga Stainless Steel 82" wide hopper, 56" side Hieght 7 gauge slotted longitudinals for easy gearbox/drive shaft removal (10ga On SS Models) 45 degree side slope Bolt in 6" wide flange (H) beam Drop N Loc top screens 1 1/2" drive shaft, 1 1/4" idler shaft, spring loaded chain take up 7 gauge bolt in replaceable conveyor floor (10 ga on SS Models) Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 1/4" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange (carbon steel Units) An optional inverted vee is recommended on hoppers over 12' in length or 62" in height Gear Box Ratio: 25:1, 6 tooth Sprocket, 1/4" thick Crossbars 18" Spinner Disk, Bottom Mount Motor Carbon Steel Spreaders (1) 8 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 6, (2) 9 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7, (3) 10 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7, (4) 11 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 7, (5) 12 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 8, (6) 13 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 8, (7) 14 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 9, (8) 15 ft Swenson EV 100 V box Spreader, Carbon Steel, Factory Orange $ 9, Stainless Steel Spreaders (9) 8 ft Swenson EV 100 V box Spreader, Stainless Steel $ 9, (10) 9 ft Swenson EV 100 V box Spreader, Stainless Steel $ 10, (11) 10 ft Swenson EV 100 V box Spreader, Stainless Steel $ 10, (12) 11 ft Swenson EV 100 V box Spreader, Stainless Steel $ 10, (13) 12 ft Swenson EV 100 V box Spreader, Stainless Steel $ 11, (14) 13 ft Swenson EV 100 V box Spreader, Stainless Steel $ 11, (15) 14 ft Swenson EV 100 V box Spreader, Stainless Steel $ 12, (16) 15 ft Swenson EV 100 V box Spreader, Stainless Steel 13, $ The following items are not stainless steel: top screens, spinner disc/fins, conveyor chain, sprockets, gearbox, gatejack, drive shaft, idler shaft, and hydraulic motors.
7 Stainless steel units are not painted. Note: Recommended material size is 1/2" or smaller. EV150 Series Hydraulic driven spreader Manufactured of 10 gauge carbon steel sides/ends or 12 ga Stainless Steel 82" wide hopper, 56" side Hieght 7 gauge slotted longitudinals for easy gearbox/drive shaft removal (10ga On SS Models) 45 degree side slope Bolt in 6" wide flange (H) beam Drop N Loc top screens 2" drive shaft, 2" idler shaft, spring loaded chain take up to the rear 7 gauge bolt in replaceable conveyor floor (10 ga on SS Models) Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 3/8" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 2 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange (carbon steel Units) An optional inverted vee is recommended on hoppers over 12' in length or 62" in height Gear Box Ratio: 50:1, 8 tooth Sprocket, 3/8" thick Crossbars 20" Spinner Disk, Top Mount Motor Carbon Steel Spreaders (17) 8 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 8, (18) 9 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 8, (19) 10 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 8, (20) 11 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 9, (21) 12 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 9, (22) 13 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 10, (23) 14 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 11, (24) 15 ft Swenson EV 150 V box Spreader, Carbon Steel, Factory Orange $ 11, Stainless Steel Spreaders (25) 8 ft Swenson EV 150 V box Spreader, Stainless Steel $ 11, (26) 9 ft Swenson EV 150 V box Spreader, Stainless Steel $ 12, (27) 10 ft Swenson EV 150 V box Spreader, Stainless Steel $ 12, (28) 11 ft Swenson EV 150 V box Spreader, Stainless Steel $ 13, (29) 12 ft Swenson EV 150 V box Spreader, Stainless Steel $ 14, (30) 13 ft Swenson EV 150 V box Spreader, Stainless Steel $ 14, (31) 14 ft Swenson EV 150 V box Spreader, Stainless Steel $ 15, (32) 15 ft Swenson EV 150 V box Spreader, Stainless Steel $ 16, The following items are not stainless steel: top screens, spinner disc/fins, conveyor chain, sprockets,
8 gearbox, gatejack, drive shaft, idler shaft, and hydraulic motors. Stainless steel units are not painted. Note: Recommended material size is 1/2" or smaller. EVA 100 Series Single and Dual Auger Spreaders Hydraulic driven spreader Manufactured of 10 gauge carbon steel sides/ends, or 12 Ga Stainless Steel 84" wide hopper 45 degree side slope 54" Bolt in 6" wide flange (H) beam Drop N Loc top screens 7 gauge bolt in replaceable conveyor floor 7" diameter hard surfaced auger with 3 pitch lengths for even unloading front to back Direct drive 18 HP hydraulic motor 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Side swing up spinner assembly for easy unloading and storage Rear grease extension Inverted vee Powder coated Omaha Orange Spinner Disc: 18" Mild Steel Motor Mount: Bottom Carbon Steel (33) 8 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 8, (34) 9 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 8, (35) 10 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 8, (36) 11 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 8, (37) 12 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 9, (38) 13 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 9, (39) 14 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 10, (40) 15 ft Swenson EVA 100 V box Spreader, Carbon Steel, Factory Orange $ 10, (41) 8 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 12, (42) 9 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 12, (43) 10 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 12, (44) 11 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 13, (45) 12 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 14, (46) 13 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 14, (47) 14 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 15, (48) 15 ft Swenson EVA 100 V box Spreader, Stainless Steel $ 16, (49) Upcharge for Dual Auger ILO Single Auger $ 1,150.00
9 VBEL Series Electric V-Box Spreader Electrically driven spreader Manufactured of 10 gauge carbon steel sides/ends 82" wide hopper 7 gauge slotted longitudinals for easy gearbox/drive shaft removal 45 degree side slope Bolt in 6" wide flange (H) beam Drop N Loc top screens 1 1/2" drive shaft, 1 1/4" idler shaft, spring loaded chain take up 7 gauge bolt in replaceable conveyor floor Self cleaning pintle style conveyor chain (21,000 lbs. tensile strength per strand) 1 1/2" x 1/4" double welded cross bars Rear chain wiper 12" adjustable in height spinner extension 1 internal baffle, 4 baffle (3 adjustable, front fixed) lower spinner assembly with bottom mounted motor Powder coated Omaha Orange Standard inverted vee on all spreaders 2 motor variable speed controller Standard flip up spinner Wiring harness included All standard v-box options available Chain Drive Motor: 1/2 HP Spinner Motor:1/2 HP Cross Bars:1/4" thick (50) 10 ft Swenson VBEL Electric V box Spreader, Carbon Steel, Factory Orange $ 12, (51) 12 ft Swenson VBEL Electric V box Spreader, Carbon Steel, Factory Orange $ 13, (52) 10 ft Swenson VBEL Electric V box Spreader, Stainless Steel $ 17, (53) 12 ft Swenson VBEL Electric V box Spreader, Stainless Steel $ 18, Installtion of V Box Sanders 8.10 (1) Installtion of Hydraulic V- Box sanders $ (2) Installtion of Electric V- Box sanders $
10 Options for Options For Swenson Hydraulic and Electric V-Box Spreaders 18 HP Kolher Gas Engine Package 8.20 EVRGH (carbon steel Units) $ 5, EVRGH- SS (Stainless Steel units $ 7, Leg Stands Carbon Steel FT $ 2, FT $ 1, FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 4, Factory Installation of Leg Stand $ Leg Stands Stainless Steel FT $ 3, FT $ 3, FT $ 4, FT $ 4, FT $ 4, FT $ 4, FT $ 4, FT $ 4, FT $ 4, Factory Installation of Leg Stand $ Inverted Vee (Carbon Steel) FT $ FT $ FT $ FT $ & 13 FT $ FT $ FT $ Inverted Vee (Stainless Steel) FT $ FT $ FT $ FT $ & 13 FT $ FT $ FT $
11 Rubber Side Shield (Carbon) FT $ FT $ FT $ FT $ FT $ FT $ FT $ 1, Rubber Side Shield (Stainless) FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, Hydraulic Hose Kits ' thru 11' $ 1, ' thru 15' $ 1, Dual Motor Short Hose Kit $ Single Motor HYD Hose Kit up to 11' $ Single Motor Short Hose Kit $ Single Flow Control Valve (Fluid Contrl) $ Dual Flow Control Valve (Fluid Control) $ Valve Stand Kit $ Reservoir Kits GAL RESERVOIR KIT $ GAL RESERVOIR KIT $ STAINLESS STEEL LIGHT BAR 8.72 Stop, Turn, Tail Lights $ 1, Stop, Turn, Tail & Flashing Lights $ 1, Stop, Turn, Tail & Strobe Lights $ 1, Stop, Turn, Tail & Back UP Lights $ 1, " Pedestal Mount Work Light $
12 ACCESSORIES 8.77 Chassis Mtg Kit 8' - 11'- v-box length $ Chassis Mtg Kit 12' - 15'- v-box length $ Slip In Nylon Strap Kit (4 total) $ Slip In Nylon Strap Kit (4 total SS Mtg) $ Tailgate Latch $ SS Tailgate Latch kit $ Frnt Bearing Grease Ext. to Rear Manifld $ Chain Oiler, Gravity (1 gal capacity) $ Chain Oiler SS, Gravity (1 gal capacity) $ Chain Oiler Poly Tank, Gravity (1 gal capacity) $ Spill Shield, 8" Overhang, 80" Width $ Spill Shield SS, 8" Overhang, 80" Width $ Spill Shield, 12" Overhang, 80" Width $ Spill Shield SS, 12" Overhang, 80" Width $ Full Cabshield 80" Width $ Full Cabshield SS 80" Width $ 1, Winch for Swing Up Spinner Assembly $ Winch for Side Swing Up Spinner Assy $ Observation Platform $ Observation Platform (Stainless Steel) $ 1, Observation Platform for Units 64" or Higher $ Observation Platform SS for Units 64" or Higher $ 1, Catwalks (Carbon Bodies) & 9 FT $ & 11 FT $ & 13 FT $ & 15 FT $ 1, Catwalks (Stainless Steel Bodies) & 9 FT $ 1, & 11 FT $ 1, & 13 FT $ 1, & 15 FT $ 2, Swenson V-Box Spreader Upcharges ILO Standard Equipment Low Temp Belt over Chain FT $ 1, FT $ 2, FT $ 2, FT $ 2, FT $ 2, FT $ 3, FT $ 3,179.00
13 FT $ 3, /8" CROSSBAR in lieu of 1/4" FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ CROSSBAR EVERY LINK FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ BELT SEALERS FT $ FT $ FT $ FT $ FT $ FT $ HEAVY DUTY TOP SCREENS LATERAL BARS FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ STAINLESS STEEL TOP SCREENS FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 2, FT $ 2, FT $ 2, FT $ 2,666.00
14 FT $ 2, METAL SIDE SPILL SHIELDS (2 per) FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ STAINLESS STEEL SIDE SPILL SHIELDS (2 per) FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ FT $ ROLLER CHAIN & 10 FT $ & 12 FT $ & 14 FT $ GAUGE SS FLOOR FT $ FT $ FT $ FT $ FT $ FT $ FROM 12 GA STAINLESS STEEL to 10 GA SS FT $ FT $ FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, FT $ 1, DEDUCT: TOP SCREEN FT $ FT $ FT $ FT $ FT $ FT $ FT $
15 FT $ Swenson PPSII Percision Placement System $ 4, VENDOR Bert's Truck Equipment, Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN PHONE NO TOLL FREE FAX NO ADDRESS jimmc@bertsonline.com
16 PRICE SCHEDULE 8.0 Sander VENDOR TO PROVIDE FOLLOWING DETAIL Sander - Make and Model Type of sander Warranty Info Swenson V-box Spreaders Hydraulic & Electric V-Box Hydraulic Insert Sanders 2 Years from in service date TOTAL PRICE: See Attached Schedule Installation of Sander PRICE See Attached Schedule List options for sander such as stainless steel, pre-wet options, pre-wet tanks, different auger size, sander control valve, sander control, end of auger shaft sensor, etc. Start with number 8.2 and use as many numbers as needed. See Attached Schedule Cost per loaded mile for delivery of sander $ 2.00 VENDOR: Bert's Truck Equipment of Moorhead, Inc CONTACT PERSON: Jim McLaughlin ADDRESS: 3804 Hwy 75 North, Po Box 336, Moorhead MN PHONE NO.: TOLL FREE: FAX NO ADDRESS: jimmc@bertsonline.com
17 Bert's Truck Equipment of Moorhead, Inc Price Schedule for Bonnell V-Box Spreaders 23-Jan-17 Bonnell V-Box Spreaders Bonnell V-Box construction: CS models, 10-gauge carbon steel sides and ends, S2 models, 12-gauge 201 stainless steel sides and ends. Sides sloped 45, 82 body width, body height (other heights available), CS models, 7-gauge longsills, 7-gauge replaceable floor. S2 models, 10-gauge longsills, 10-gauge replaceable floor. 24 wide conveyor longsills of 7-gauge steel, 22.5 wide pintle type conveyor with 3/8 x 1-1/2 crossbars every 4.5, 1-1/2 drive shaft, 8-tooth sprockets, 50:1 gear box drive, 1-1/2 idler shaft spring loaded & adjusted. Standard duty top screens. Optional inverted-v - not included. 18 carbon steel spinner disc with replaceable fins. Note: CS and S2 models include 18 carbon steel disc. Swing up spinner assembly with 4 external baffles and 2 internal baffles. Note: CS models are carbon steel, S2 units are 201 stainless steel Carbon steel units - painted orange - standard Stainless steel units - not painted. Note: most bolt on items are painted black - standard. Section Item MODEL NUMBER MATERIAL LENGTH HEIGHT CA/CT CUBIC YARDS WEIGHT Price Carbon Steel Price 201 Stainless Steel BV-950 (CS/S2) ,220 $ 8, $ 11, BV-956 (CS/S2) ,305 $ 8, $ 11, BV-962 (CS/S2) ,395 $ 8, $ 11, BV-1050 (CS/S2) ,385 $ 8, $ 12, BV-1056 (CS/S2) ,480 $ 8, $ 12, BV-1062 (CS/S2) ,575 $ 8, $ 12, BV-1150 (CS/S2) ,525 $ 8, $ 12, BV-1156 (CS/S2) ,625 $ 8, $ 12, BV-1162 (CS/S2) ,725 $ 8, $ 12, BV-1250 (CS/S2) ,695 $ 8, $ 12, BV-1256 (CS/S2) ,800 $ 9, $ 13, BV-1262 (CS/S2) ,905 $ 9, $ 13, BV-1350 (CS/S2) ,835 $ 9, $ 13, BV-1356 (CS/S2) ,945 $ 9, $ 13, BV-1362 (CS/S2) ,055 $ 9, $ 13, BV-1450 (CS/S2) ,005 $ 10, $ 14, BV-1456 (CS/S2) ,120 $ 10, $ 14, BV-1462 (CS/S2) ,235 $ 10, $ 14, BV-1550 (CS/S2) ,145 $ 10, $ 14, BV-1556 (CS/S2) ,265 $ 10, $ 14, BV-1562 (CS/S2) ,385 $ 10, $ 15, Auger Units BVA-948 (CS/S2) ,215 $ 8, $ 12, BVA-954 (CS/S2) ,305 $ 9, $ 12, BVA-960 (CS/S2) ,395 $ 9, $ 12, BVA-1048 (CS/S2) ,385 $ 9, $ 12, BVA-1054 (CS/S2) ,480 $ 9, $ 13, BVA-1060 (CS/S2) ,575 $ 9, $ 13,167.00
18 BVA-1148 (CS/S2) ,525 $ 9, $ 13, BVA-1154 (CS/S2) ,625 $ 9, $ 13, BVA-1160 (CS/S2) ,725 $ 9, $ 13, BVA-1248 (CS/S2) ,695 $ 9, $ 13, BVA-1254 (CS/S2) ,800 $ 9, $ 14, BVA-1260 (CS/S2) ,905 $ 10, $ 14, BVA-1348 (CS/S2) ,835 $ 10, $ 14, BVA-1354 (CS/S2) ,945 $ 10, $ 14, BVA-1360 (CS/S2) ,055 $ 10, $ 14, BVA-1448 (CS/S2) ,005 $ 10, $ 15, BVA-1454 (CS/S2) ,120 $ 11, $ 15, BVA-1460 (CS/S2) ,235 $ 11, $ 15, BVA-1548 (CS/S2) ,145 $ 11, $ 15, BVA-1554 (CS/S2) ,265 $ 11, $ 15, BVA-1560 (CS/S2) ,385 $ 11, $ 15, Installtion of Bonnell Spreaders $ Options 8.2 Light Bar Assembly. Plastic/poly enclosure - 69 wide, bolt on (4) L.E.D. $ stop/turn/taillights and ICC ID Marker lights, wire harness with pigtail and 7-prong trailer plug 8.21 Light Bar Assembly. Stainless steel enclosure - 78 wide, bolt on (4) L.E.D. $ stop/turn/taillights and ICC ID Marker lights, wire harness with pigtail and 7-prong trailer plug 8.22 BV Leg Storage Stand - Carbon Steel Only (black) (limited to spreader models) $ 4, BON Short hose kit includes Pioneer 4004PH $ Quick-disconnect couplers (two sets) and (four) 1/2 hoses Sensored Motor SM Conveyor-Sensored motor (in lieu of standard motor) $ (Not available on BVA model) Bonnell recommends using external sensors PREWET OPTIONS: 8.25 LDS-TG100-EMB/NQF 215 Electric Spray System with one 100-gallon polyethylene tank and $ 3, mounting hardware for under tailgate spreader. Carbon steel hardware 8.26 LDS-VB90-EMB/NQF 125 Electric Spray System with one 90-gallon polyethylene tank and $ 2, mounting hardware for V-Box spreader. Carbon steel hardware 8.27 LDS-VB135-EMB/NQF 170 Electric Spray System with one 135-gallon polyethylene tank and $ 2, mounting hardware for V-Box spreader. Carbon steel hardware 8.28 LDS-VB270-EMB/NQF 340 Electric Spray System with two 135-gallon polyethylene tank and $ 2, mounting hardware for V-Box spreader. Carbon steel hardware 8.29 INSTALLATION Factory installation of V-Box Pre-Wet System 1-Tank System $ Tank System $ VENDOR Bert's Truck Equipment, Inc. CONTACT PERSON Jim McLaughlin ADDRESS 3804 Hwy 75 North, PO Box 336, Moorhead, MN PHONE NO TOLL FREE FAX NO ADDRESS jimmc@bertsonline.com
8.0 NON-MnDOT PRICE SCHEDULE SANDER. Falls 1ASD Tailgate 6 & 9" Sanders 1.0 (Stainless Steel) TOTAL PRICE: See Attached Schedule 8.
Price quote for: 8.0 NON-MnDOT PRICE SCHEDULE SANDER Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip: Phone #: Toll Free #: Fax #: Email Address: Bert's Truck Equipment of Moorhead,
More information1ASD-6CDSS-6P-1D-2S-LM "Salt Special" sander, dual spinner, w/unidirectional reversible auger, includes extra salt shields (Per Ea)
PRICE SCHEDULE 8.0 TO PROVIDE - Make and Model FALLS 1ASD-6 Stainless Steel Under tailgate type, 6" dia (carbon steel) 6" pitch, single auger, direct hydraulic drive, LH Discharge w/poly self-leveling
More informationSTATE OF MINNESOTA PRICING PAGE
STATE OF MINNESOTA PRICING PAGE Page 1 of 8 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336
More informationSTATE OF MINNESOTA PRICING PAGE
STATE OF MINNESOTA PRICING PAGE Page 1 of 1 PLEASE PURCHABert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336
More informationFOLLOWING DETAIL. One Year Warranty, parts and labor
- Make and Model Henderson TGS 6 6" diameter auger type tailgate sander with 3/8" thick flighting. Direct drive auger and Spinner motors. Fighting is welded to a 2-3/8" O.D. schedule 80 pipe, supported
More informationMEYER MATE 9.0 CU FT. SPREADER
MEYER MATE 9.0 CU FT. SPREADER General Specifications Overall Height: 41.25" Overall Width: 49.5" Overall Depth: 32" Weight Empty: 140 lbs. Spreading Width: Minimum 3 Maximum 30 Spreading Material: Dry
More informationV -BOX SPREADERS With over 70 years of experience, Swenson M A K E I T Y O U R W AY.
Discover the Swenson Advantage. With over 70 years of experience, Swenson M A K E I T Y O U R W AY. Spreader Company is the recognized leader in the design and manufacturing of truck-mounted spreaders
More informationTAILGATE SPREADERS The most cost-effective high quality tailgate spreaders in the industry.
SaltDogg Mean On Ice, Man's Best Friend. SaltDogg has the cost-effective, quality spreader you need with everything from manual walk-behind spreaders to insert salt spreaders and tailgate spreaders to
More informationPRICE LIST. Swenson Spreader Price List. Effective: September 14th, DRIVE PRODUCTS Mississauga, Ontario L4W 1T7
2015-16 PRICE LIST Swenson Spreader Price List Effective: September 14th, 2015 DRIVE PRODUCTS Mississauga, Ontario L4W 1T7 Phone: (905) 564-5800 Fax: (905) 564-5799 Toll Free Phone: (800) 668-6012 Website:
More informationSTATE OF MINNESOTA PRICING PAGE
Page 1 of 3 PLEASE PURCHASE ExceAspen Equipment Co Contact Person: Mark Lundeen Street Address: 9150 Pillsbury Ave. South P.O. Box: City, State, Zip Bloomington, MN 55420 Phone #: 952-888-2525 Toll Free
More informationCost per loaded mile for delivery of hydraulics $
PRICE SCHEDULE 9.0 Hydraulics Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve
More informationConcord Road Equipment Mfg., Inc. NorEast-R. Severe Duty Combination Dump Body Spreader with Flat Floor and Integral Center Conveyor
Body Lengths Standard available body lengths (inside of headsheet to inside of tailgate) are 9ft, 10ft, 11ft, 13ft, and 15ft; special sizes are available upon request Understructure Construction Longitudinal
More information22956 Hwy 61 PO Box 295 Morley, MO Phone: Fax: MODOT 04/17/17
-GENERAL SERVICES FLEET SECTION TP260000 Viking TP 26, 26' Tow Plow with swivel tongue, (1) 12' moldboard and (1) 14', base angles drilled for carbide edges (no cutting edges included), 10 gauge steel
More informationSpecifications For MEYER UTG GEAR STAINLESS STEEL. General: Comply Exception
MEYER UTG GEAR STAINLESS STEEL General: This under tailgate shall be of the bottom opening design. The entire unit shall rigidly mount to the side of the dump box with single pin quick detachable hardware.
More informationPICK IT UP. poly hawk ice hawk lpv pv MDV ICKUP V-BOX SPREADERS
PICK IT UP. poly hawk ice hawk lpv pv MDV ICKUP V-BOX SPREADERS HOW TO CHOOSE THE RIGHT SWENSON PV SPREADER FOR YOUR APPLICATION. With a complete line of rugged equipment to choose from, Swenson s value
More informationINSTALLATION AND INSTRUCTIONAL MANUAL ELECTRIC V-BOX MATERIAL SPREADERS
0050-00-00 07-06-00 Contents SAFETY... MOUNTING INSTRUCTION... -5 ELECTRICAL CONTROL INSTRUCTION... 6-9 V-BOX PARTS DIAGRAMS AND LISTINGS... 0-5 SPINNER PARTS DIAGRAMS AND LISTINGS... 6-0 DRIVE SHAFT,
More informationPower Options. Also Available. Unique Features. Conveyor & Drive
FISHER SPREADERS The FISHER PRO-CASTER hopper spreaders are perfect for ice control on driveways, roads and parking lots. Available in 7', 8', 9' and 10' body lengths in powder coated steel or stainless
More informationThe TARCO Highlander JR is heavy-duty type material spreader that can be used for a variety of light to medium duty truck applications.
THE BASICS: The TARCO Highlander JR is heavy-duty type material spreader that can be used for a variety of light to medium duty truck applications. Typical buyers of these types of machines include municipalities,
More informationHopper and Drive Components STEEL-CASTER Hopper Spreader
Fisher Engineering 99004, 99008, 99012 99015, 990 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com December 15, 20 Lit. No. 99, Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader
More informationHopper and Drive Components STEEL-CASTER Hopper Spreader
Fisher Engineering 99004-1, 99008-1, 99012-1 99015-1, 990-1 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com December 15, 20 Lit. No. 43761, Rev. 02 Hopper and Drive Components STEEL-CASTER
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 80190 March 15, 2016 Lit. No. 43778, Rev. 01 Hopper and Drive Components SPEED CASTER 900 Low Profile Tailgate Spreader
More informationDate & I.D. of Price List 5/1/2012 Discount to be applied to Price List* (see note below) 0%
#250-109 STATE OF MINNESOTA PRICING PAGE Page 1 of 1 Vendor Name: Bert's Truck Equipment, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead,
More informationWALK BEHINDS TAILGATE SPREADERS V BOX SPREADERS MUNICIPAL SPREADERS FULL LINE
WALK BEHINDS TAILGATE SPREADERS V BOX SPREADERS MUNICIPAL SPREADERS FULL LINE 2 TABLE OF CONTENTS WALK BEHIND SPREADERS 3 WB100B & WB200B (polymer) WB400 (polymer) TAILGATE SPREADERS 4-8 TGSUV1B (polymer)
More informationPiston type, load sensing, 4.67 cu. in. with 1" shut off valve (pump model FASD34L LS)
Hydraulics - Make and Model Cab controls description Sander control description Pump drive description Pump type Valve description Number and type functions Type of valve actuation Reservoir size Fluid
More informationSpecifications for: Hi-Way Model SA-6C 304 Stainless Steel Under Tailgate Spreader Comply to. Make and Model Bid: HOPPER AUGER MECHANISM
Hi-Way Model SA-6C 304 Stainless Steel Under Tailgate Spreader GENERAL 1. The under tailgate spreader required in these specifications shall be hydraulically operated and shall consist of a steel trough,
More informationHopper and Drive Components
Western Products, PO Box 45038, Milwaukee, WI 534-9538 www.westernplows.com January 15, 019 Lit. No. 437, Rev. 0 Hopper and Drive Components Striker Hopper Spreader with Electric Motors #99030-1, 99031-1,
More informationSALTDOGG SPREADERS NOTHING WORKS LIKE A DOGG. HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NEW NEW
SALTDOGG SPREADERS NEW NEW HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie
More informationALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS
ALLEGAN COUNTY ROAD COMMISSION SPECIFICATION FOR BIDS PROPOSAL FOR DUMP BOX BODIES, V BOX SPREADERS, UNDER BODY SCRAPERS, PLOW WINGS, FABRICATION AND ASSEMBLY OF COUNTY DUMP TRUCKS Board of County Road
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 78001 1, 78004 1, 78007 1 November 1, 2017 Lit. No. 99754, Rev. 04 Hopper and Drive Components POLY CASTER Hopper Spreader
More informationSALTDOGG SPREADERS NOTHING WORKS LIKE A DOGG. HOPPER DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NEW NEW
SALTDOGG SPREADERS NEW NEW DESIGN on SHPE2000 SERIES EZ LIDS TM for PRO2000 and SHPE2000 SERIES NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 213 www.fisherplows.com 8001 1, 8004 1, 800 1 January 1, 201 Lit. No. 54, Rev. 02 Hopper and Drive Components POLY CASTER Hopper Spreader Parts
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 78001 1, 78004 1, 78007 1 March 15, 19 Lit. No. 99754, Rev. 06 Hopper and Drive Components POLY CASTER Hopper Spreader
More informationHopper and Drive Components
Western Products, PO Box 08, Milwaukee, WI 8 www.westernplows.com November 1, 01 Lit. No. 8, Rev. 0 Hopper and Drive Components Striker Hopper Spreader with Gasoline Engine #0, 0, 0, 0, 00, 01, 0, 0, 0,
More informationPrice per loaded mile for delivery $ 2.25 Delivery Time Frame in calendar days ARO
Flatbeds Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc Jim McLaughlin
More informationPage 1. Equipment: RSP Moldboard Only Serial # RSP RSP Qty: 2. Equipment: OWP Serial # OWP Qty: 1
NON STOCK INVENTORY The following units are currently in stock and discounted for immediate delivery. All units are new, unless otherwise stated and sold AS IS. Standard manufacturer s warranty on pumps,
More informationHopper and Drive Components
Western Products, PO Box 08, Milwaukee, WI 8 www.westernplows.com November 1, 01 Lit. No., Rev. 01 Hopper and Drive Components Striker Hopper Spreader With Gasoline Engine #0 1, 0 1, 0 1, 0 1, 00 1, 01
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 78001-1, 78004-1, 78007-1 August 1, 18 Lit. No. 99754, Rev. 05 Hopper and Drive Components POLY-CASTER Hopper Spreader
More informationILLUSTRATED PARTS LISTING EUROPEAN CE POLYHAWK SPREADERS
reserves the right, under its continuing product improvement program, to change construction or design detail, specifications Page HOPPER ASSEMBLY ILLUSTRATED PARTS LISTING 4 3 0 0 9 8 4 3 3 5 5 6 6 9
More informationHopper and Drive Components
Western Products, PO Box 45038, Milwaukee, WI 534-9538 www.westernplows.com August 1, 0 Lit. No. 437, Rev. 00 Hopper and Drive Components Striker Hopper Spreader With Electric Motors #99030-1, 99031-1,
More informationHopper and Drive Components
Western Products, PO Box 2508, Milwaukee, WI 522-958 www.westernplows.com January 15, 2016 Lit. No. 99755, Rev. 00 Hopper and Drive Components Tornado Hopper Spreader Parts List This Parts List is for
More informationHopper and Drive Components
Fisher Engineering 0 Gordon Drive, Rockland, Maine 04841 2139 www.fisherplows.com 99000, 99001 9900, 99009 April 1, 2017 Lit. No. 9994, Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader With
More informationALL NEW DESIGN 2.5 cu.yd. Spreader. with auger or chain drive. see pg. 16 & 17 for details
2016-2017 ALL NEW DESIGN 2.5 cu.yd. Spreader with auger or chain drive see pg. 16 & 17 for details Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman as a distributor of
More informationHopper and Drive Components STEEL-CASTER Hopper Spreader
Fisher Engineering 00, 00, 00, 00, 0 0, 01, 01, 01, 01 0 Gordon Drive, Rockland, Maine 081 1 www.fisherplows.com December 1, 018 Lit. No., Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-139 www.fi sherplows.com 99000-1, 99001-1 99005-1, 99009-1 June 15, 018 Lit. No. 43759, Rev. 01 Hopper and Drive Components STEEL-CASTER Hopper
More informationMUNICIPAL SNOW & ICE CONTROL EQUIPMENT NOTHING WORKS LIKE A DOGG
MUNICIPAL SNOW & ICE CONTROL EQUIPMENT NOTHING WORKS LIKE A DOGG Our History 1946 Buyers Products Company founded by Sam Ruven and Bessie Kleinman as a distributor of driveline components. Buyers continued
More informationOwners Manual SS, SS Self-Contained Stainless Steel Hopper Spreaders. Table of Contents. General Information
Owners Manual 1400601SS, 1400701SS Self-Contained Stainless Steel Hopper Spreaders Table of Contents Warranty Information... 1 General Information... 1-2 Safety Precautions... 2 Installation Instructions...
More informationSTATE OF MINNESOTA PRICING PAGE. Dump Bodies. Version of Excel used: 2013
Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc Jim McLaughlin 3804 Hwy 75 North 336 Moorhead, MN
More informationILLUSTRATED PARTS LISTING EUROPEAN CE PV SPREADERS
reserves the right, under its continuing product improvement program, to change construction or design detail, specifications 85 Euclid Ave Cleveland, Ohio Phone 6-86- Fax 6-86-95 Page HOPPER ASSEMBLY
More informationInstallation Manual. Self-Contained Hopper Spreaders Carbon & Stainless Steel Models. Table of Contents. General Information CAUTION
9049 Tyler Blvd. Mentor, Ohio 44060 Phone (440) 974-8888 Fax (440) 974-0165 Toll-Free Fax 800-841-8003 buyersproducts.com Self-Contained Hopper Spreaders Carbon & Stainless Steel Models Manual applies
More informationInstallation Instructions
909 Tyler Blvd. Mentor, Ohio 00 Phone (0) 9- Fax (0) 9-0 Toll-Free Fax 00--00 saltdogg.com Installation Instructions SHPE000CH Series SaltDogg Electric Chain Drive Poly Hopper Spreader.0 cubic yards U.S.
More information78002, 78005, Hopper Spreader Components
Blizzard, PO Box 245038, Milwaukee, WI 53224 9538 www.blizzardplows.com June 15, 2016 Lit. No. 94207, Rev. 03 78002, 78005, 78008 Hopper Spreader Components ICE CHASER Hopper Spreader Parts List This Parts
More informationHydraulics & Controls
Hydraulics & Controls Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc
More informationHopper and Drive Components
Fisher Engineering 0 Gordon Drive, Rockland, Maine 0484 39 www.fisherplows.com 99000, 9900 9900, 99009 January, 07 Lit. No. 9994, Rev. 0 Hopper and Drive Components STEEL-CASTER Hopper Spreader With Electric
More informationInstruction Manual. Municipal-Sized Hydraulic Powered Stainless Steel Hopper Spreaders. Table of Contents
9049 Tyler Blvd. Mentor, Ohio 44060 Phone (440) 974-8888 Fax (440) 974-065 Toll-Free Fax 800-84-8003 saltdogg.com Municipal-Sized Hydraulic Powered Stainless Steel Hopper Spreaders Table of Contents Instruction
More information78002, 78005, Hopper Spreader Components
Blizzard, PO Box 245038, Milwaukee, WI 53224-9538 www.blizzardplows.com February 1, 20 Lit. No. 94192, Rev. 78002, 78005, 78008 Hopper Spreader Components ICE CHASER Hopper Spreader Parts List This Parts
More informationInstallation Manual. Self-Contained Hopper Spreaders Carbon & Stainless Steel Models
Self-Contained Hopper Spreaders Carbon & Stainless Steel Models This manual applies to the following models: 72" Spreaders (serial numbers 1200 and above) 96" Spreaders (serial numbers 4884 and above)
More informationHydraulics & Controls
Hydraulics & Controls Contract end Date 10-31-17 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Bert's Truck Equipment, Inc
More informationAddendum #4 PRICE SCHEDULE 1.0 VENDOR PROVIDED INFORMATION
Addendum #4 PRICE SCHEDULE 1.0 BOX OPTIONS VENDOR PROVIDED INFORMATION Misc 2.27 1312120 Gatesaver Hyd Tailgate Insert Installed $2,760.00 2.31 1650355 Frame End cap W/OEM Stop-Tail-Turn Light mounts (Required
More informationTRAILER OR SKID MOUNT AIR COMPRESSOR
August 2017 Price quote for: (Typed Resonses Required) TRAILER OR SKID MOUNT AIR COMPRESSOR 1 of 33 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #:
More informationPro 575X, Pro 1075X Single Stage Tailgate Spreader
August 1, 2017 Lit. No. 70443, Rev. 04 Pro 575X, Pro 1075X Single Stage Tailgate Spreader SP-575X-1, SP-1075X-1 Parts List This Parts List is for SnowEx Pro spreaders with serial numbers beginning with
More informationAirflo MANUFACTURING CO., INC.
Airflo MANUFACTURING CO., INC. 365 UPPER OAKWOOD AVE, ELMIRA NY 14903 PHONE: 607-733-8284 / FAX: 607-733-0587 OPERATOR & PARTS MANUAL PSV-8L ELECTRIC SPREADER Visit our website at www.air-flo.com Contents
More informationLiftmoore Electric & Hydraulic Cranes. One Year from in service date. Date & I.D. of Price List
#250-109 STATE OF MINNESOTA PRICING PAGE ADDENDUM 3 5-11-2011 Vendor Name:, Inc Contact Person: Jim McLaughlin Street Address: 3804 Highway 75 North P.O. Box: 336 City, State, Zip Moorhead, MN 56561-0336
More informationLIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME:
LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME: DATE WARRANTY CARD RETURNED: VIA: WEBSITE MAIL FORCE UNLIMITED LLC FORCE UNLIMITED LLC
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80190 January 15, 2019 Lit. No. 43778, Rev. 03 Hopper and Drive Components SPEED-CASTER 900 Low-Profile Tailgate Spreader
More informationCity of New Haven. 101 FRONT STREET PO BOX 236 NEW HAVEN, MO Phone * * Fax
City of New Haven 101 FRONT STREET PO BOX 236 NEW HAVEN, MO 63068 Phone 573-237-2349 * www.newhavenmo.org * Fax 573-237-4696 August 20, 2014 Request for Bids, Medium Duty Truck City of New Haven The City
More informationMODEL P Parts List UNIT SERIAL NUMBER MANUAL NUMBER: AB-F EFFECTIVE 06/2016
Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 06/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway Equipment
More informationDate & Price List I.D. Number June 23rd, 2014
07/2014 VERSION 4 % DISCOUNT OFF PRICE PAGES/CRANES Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: Jim McLaughlin 3804 Hwy
More informationILLUSTRATED PARTS LISTING EUROPEAN CE LPV SPREADERS
reserves the right, under its continuing product improvement program, to change construction or design detail, speci - HOPPER ASSEMBLY reserves the right, under its continuing product improvement program,
More informationLIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME:
LIMITED WARRANTY COMPANY NAME: COMPANY ADDRESS: CITY: STATE: ZIP: MODEL: SERIAL NUMBER: DATE PURCHASED: DEALER NAME: DATE WARRANTY CARD RETURNED: VIA: WEBSITE MAIL FORCE UNLIMITED LLC FORCE UNLIMITED LLC
More informationInstruction Manual. SHPE1500 Salt Dogg Spreader Hopper Poly Electrical 1.5 cubic yards
9049 Tyler Blvd. Mentor, Ohio 44060 Phone (440) 974-8888 Fax (440) 974-0165 Toll-Free Fax 800-841-8003 buyersproducts.com SHPE1500 Salt Dogg Spreader Hopper Poly Electrical 1.5 cubic yards Instruction
More informationV-Maxx G2 Hopper Spreader
July, 0 Lit. No. 0, Rev. 0 V-Maxx G Hopper Spreader VX-00 & VX-00HO Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC Hopper Assembly 0 Lit. No. 0, Rev. 0 July, 0 Keep arms, hands, and loose clothing away
More informationDate & Price List I.D. Number. Price per loaded mile $
04/2013 % DISCOUNT OFF PRICE PAGES/CRANES Vendor Name: Bert's Truck Equipment of Moorhead, Inc Contact Person: Jim McLaughlin, Government Fleet Sales Street Address: 3804 Highway 75 North P.O. Box: PO
More informationInstallation Instructions
909 Tyler Blvd. Mentor, Ohio 00 Phone (0) 9-8888 Fax (800) 8-800 www.saltdogg.com Installation Instructions Municipal-Sized Electric Powered Stainless Steel Hopper Spreaders Table of Contents General Information...
More informationV-Maxx G2 Hopper Spreader
July, 0 Lit. No. 04, Rev. 04 V-Maxx G Hopper Spreader VX-300 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 4 4 3 0 4 0 3 3 30 Lit. No. 04, Rev. 04 July, 0 3 ROTATING AUGER CAN CAUSE SERIOUS
More informationParts Manual. Model: 1550-D
Parts Manual Model: 550-D Covers 50-K-50TKZ8Y2-0250 through Sold & Serviced By: Contents Quick Order List... Hopper and Plastic...3 Push Beam and Sight Gauge...5 Engine Compartment...7 Hood Assembly...9
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152, 80190 January 15, 2019 Lit. No. 70499, Rev. 01 Hopper and Drive Components SPEED-CASTER 525, SPEED-CASTER 900
More informationPower Heads. Standard Unload. Power Sweep. Commercial Unload. Bin Systems. Unloading
Standard Unload Power Sweep Commercial Unload Power Heads Unloading Bin Systems Klean Sweep the finishing touch. The unique back-up shield and torque tube combination adjusts for close floor clearance
More informationSTATE OF MINNESOTA PRICING PAGE Dump Bodies
STATE OF MINNESOTA PRICING PAGE Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City, State, Zip St Paul, MN 55109 Phone #: 651-393-2274 Toll
More informationSNOW PLOW, FRAME, HYDRAULIC SYSTEM, DUMP BODY, WING, SPREADER AND PRE-WET TANK SYSTEM
DEKALB COUNTY HIGHWAY DEPARTMENT SNOW PLOW, FRAME, HYDRAULIC SYSTEM, DUMP BODY, WING, SPREADER AND PRE-WET TANK SYSTEM Sealed proposal for the furnishing and installing of snow plow, frame, hydraulic system,
More informationSTATE OF MINNESOTA. 5.0 DUMP BODY SCOTT ALUMINUM Make. LANDSCAPER BODY Warranty. 1 YEAR BODY, DEALER PRICE LIST Date & I.D.
Vendor Name: ABM EQUIPMENT & SUPPLY, LLC. PRICING PAGE Contact Person: RON ZIMMER Street Address: 333 2ND STREET NE P.O. Box: City, State, Zip HOPKINS, MN 55343 Phone #: 952-938-5451 Toll Free #: 800-229-5451
More informationHopper and Drive Components
Fisher Engineering 50 Gordon Drive, Rockland, Maine 04841-2139 www.fi sherplows.com 80152-1, 80190-1 October 1, 2018 Lit. No. 70497, Rev. 01 Hopper and Drive Components SPEED-CASTER 525, SPEED-CASTER 900
More informationInstallation Instructions
0 Tyler Blvd. Mentor, Ohio 00 Phone (0) - Fax (0) -0 Toll-Free Fax 00--00 saltdogg.com Installation Instructions PRO000 &PRO000CH Series SaltDogg Electric Drive Poly Hopper Spreader.0 cubic yards U.S.
More informationBlackfoot. ID Blackfoot. ID MDL 1110 CONVEYOR OPEN DIRT Page 1 of 19
1110 MDL 1110 CONVEYOR OPEN DIRT Page 1 of 19 1110-55-0000000000000000000297 Blackfoot. ID Select Length 24' Select Width 30" Select Frame Style STANDARD & OVERSEAS Select Lift Kit MANUAL Select Conveyor
More informationIt don t mean a thing If it ain t got the swing
SWING CHUTE SAND/SALT SPREADER INSTALLATION AND OPERATING INSTRUCTIONS SWING CHUTE SPREADER MODELS: 7, 8, 9, 9.5 & 10 MANUAL FOR SPREADER SERIAL NUMBERS AFTER # 20000 It don t mean a thing If it ain t
More informationSTATE OF MINNESOTA PRICING PAGE
Vendor Name: Stonebrooke Equipment, Inc. Contact Person: Loren Holman or Customer Service Street Address: 14311 Ewing Avenue P.O. Box: City, State, Zip Burnsville, MN 55306 Phone #: (952) 224-4440 Toll
More informationMOBILE MIXERS PARTS MANUAL HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS. Serial number up to
MOBILE MIXERS PARTS MANUAL 405-470 - 540 HIGH ROUGHAGE, STATIONARY, TRUCK & TRAILER MODELS Serial number up to Harsh International, Inc. 600 Oak Ave. Eaton, CO 80615-0007 (970) 454-2291 Fax: (970) 454-3491
More informationMODEL SUPER P Parts List
MODEL Parts List UNIT SERIAL NUMBER MANUAL NUMBER: EFFECTIVE 05/2016 1330 76TH AVE SW CEDAR RAPIDS, IA 52404-7052 PHONE (319) 363-8281 FAX (319) 286-3350 www.highwayequipment.com Copyright 2007 Highway
More informationFERTILIZER AND LIME TRAILER SPREADERS MODELS: 507, 508, AND 509
FERTILIZER AND LIME TRAILER SPREADERS MODELS: 507, 508, AND 509 OWNERS MANUAL General Fertilizer Equipment INC. 1-800-277-4377 SPEEDYSPREAD.COM FAX # 336-854-5796 JUNE 2003 IMPORTANT CONTACT INFORMATION
More informationSP-575V Tailgate Spreader
May 15, 2017 Lit. No. 99728, Rev. 01 SP-575V Tailgate Spreader Parts List This Parts List is for SnowEx SP-575V tailgate spreaders with serial numbers 140410300010SP-575V and higher. A DIVISION OF DOUGLAS
More informationBID SPECIFICATIONS FOR 16 STEEL DUMP BODY OPTION B (MANUAL TRANSMISSION) OX BODIES/16 STAMPEDE $24, (INCLUDING OPTIONS)
BID SPECIFICATIONS FOR 16 STEEL DUMP BODY OPTION B (MANUAL TRANSMISSION) OX BODIES/16 STAMPEDE $24,712.00 (INCLUDING OPTIONS) GENERAL These specifications shall be construed as the minimum acceptable standards
More informationUse Amber to cut through blinding snow. Also excellent to view your salt while using your tailgate spreader. NEW
Low Price - High Output LED Worklights Great Price! 700 Lumens $18.72 700 Lumen LED Worklight -1/" Round 67-821 1+ $19.89 6+ $18.72 Flood Beam Multivolt 9-33 VDC 9 Watt 6-LEDs 600K Color Temp Super Bright
More informationV-Maxx G2 Hopper Spreader
September, 0 Lit. No. 04, Rev. 03 V-Maxx G Hopper Spreader VX-300 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 4 4 3 0 4 0 3 3 30 Lit. No. 04, Rev. 03 September, 0 3 ROTATING AUGER CAN
More informationInstallation Instructions
909 Tyler Blvd. Mentor, Ohio 060 Phone (0) 97- Fax (0) 97-016 Toll-Free Fax 00-1-00 saltdogg.com Installation Instructions SHPE000 SaltDogg Electric Drive Poly Hopper Spreader.0 cubic yards U.S. PATENT
More informationMOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY
MOBILE MIXERS PARTS MANUAL 900SD TRUCK, TRAILER, STATIONARY HARSH INTERNATIONAL, INC. 600 OAK AVE. EATON, COLORDO 80615-007 MAIN NUMBER: (970) 454-2291 FAX: (970) 454-3491 PRICE: $2.50 PARTS BOOK NUMBER:
More informationSP-325, SP-575X, SP-1075X Single Stage Tailgate Spreaders
August 1, 2017 Lit. No. 43827, Rev. 05 SP-325, SP-575X, SP-1075X Single Stage Tailgate Spreaders Parts List This Parts List is for SnowEx SP 325 spreaders with serial numbers beginning with 140502 and
More informationV-Maxx G2 Hopper Spreader
October, 07 Lit. No. 707, Rev. 00 V-Maxx G Hopper Spreader VX-00 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 5 8 9 7 7 8 0 5 0 8 9 5 8 9 Lit. No. 707, Rev. 00 October, 07 ROTATING AUGER
More informationV-Maxx G2 Hopper Spreader
October, 07 Lit. No. 70, Rev. 0 V-Maxx G Hopper Spreader VX-0 Parts List A DIVISION OF DOUGLAS DYNAMICS, LLC HOPPER ASSEMBLY 7 0 7 7 7 0 Lit. No. 70, Rev. 0 October, 07 ROTATING AUGER CAN CAUSE SERIOUS
More information8.0 NON-MnDOT PRICE SCHEDULE SANDER
1.0 Sander - Make and Model Kline Slurry Auger Kit Part # 1-081027 - SAK 2.0 Type of Sander Stainless slurry auger (8-1/2" dia) Kline Rotary Union / Sensor Drive Assy TOTAL PRICE: $5,302.01 Kline Slurry
More informationDump Bodies Version of Excel used: CONTRACTOR BODY Warranty
Dump Bodies Contract end Date 09-30-18 Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Email Address: Website: ABM Equipment & Supply, LLC. Sam Fahey
More informationSTATE OF MINNESOTA PRICING Page % DISCOUNT
TRAILERS: DUMP BODY, LOWBOYS, FLATBED, TAG, SLIDE AXLE, UTILITY, GOOSENECK, ENCLOSED, ETC. Vendor Name: Truck Utilities Inc Contact Person: Paul Warner Street Address: 2370 English Street P.O. Box: City,
More information