-6 & 2030G2-6 6-BAR SERIES

Transcription

1 GENERATION 2 BASKET RAKE MODELS 2027G2-6 & 2030G2-6 6-BAR SERIES Serial # PARTS MANUAL

2

3 GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3 EXTENSION ARM ASSEMBLY 4- BASKET HANGER, FRAME, & LIFT ASSEMBLY 6-7 TWIN HUB AND STAR ASSEMBLY 8-9 GAUGE WHEEL ASSEMBLY ANGLE STOP ASSEMBLY HYDRAULIC FLOW CONTROL 14-1 HYDRAULIC SCHEMATIC 16- EXTENSION ARM HYDRAULIC CYLINDER 18 CONTROL VALVE CONTROL BOX

4 MAIN FRAME ASSEMBLY MODELS: 2027/30G

5 MAINFRAME ASSEMBLY MODELS: 2027/30G2-6 ITEM QTY PART NO DESCRIPTION 1 1 HR-2030-G2 Main Frame 3 16 HR-001-G2 Slide Tube Wear Strip 1/4 x 3 7/8 4 8 HR-00-G2 Shim # 16 G SFHMS 1/4" x 1 1/4" Slot Flat Head Machine Screw w/ 1/4" Nylock Nut (Shim Side) (not shown) # 16 G-2-1-SFHMS 1/4" x 1" Slot Flat Head Machine Screw w/ 1/4" Nylock Nut (not shown) REF HR-001HK Slide Tube Wear Strip Hardware Kit, Includes 16 ea. of the above 2 items 1 HR-202 Tongue Jack 6 1 HR-0490 Clevis Hitch Assembly 7 REF HR-2410P 2-/16" Ball Hitch - optional for clevis hitch 8 1 HR-2001 Stripper Bar Adjustment Tool 9 1 HR-0391 Hydraulic Manifold w/ Cartridges 10 1 HR-0341 Safety Chain - 37" 11 1 HR /2 Clamp - Double Hose (w/ Mounting Plate & Top Plate) 12 2 HR-0700 Base Plate (1/2 Clamp - Single Hose) 13 2 HR-04 1/2 Clamp - Single Hose 14 2 HR-041 Top Plate (1/2 Clamp - Single Hose) 1 4 HR /4 x 1-1/2 HHCS 16 4 HR-0701 Base Plate (3/4 Clamp - Single Hose) 6 HR /4 Clamp - Single Hose 18 4 HR-0408 Top Plate (3/4 Clamp - Single Hose) 19 8 HR /4 x 1-1/2 HHCS 20 4 HR-0406 Stack Bolt 3/4 Clamp 21 2 HR Spread Cylinder Without External Hydraulic Line, Ram 22 4 HR-03 Hyd Cyl Pin 23 2 G NCU 3/8" x 3 1/2" U-Bolt 24 1 HR-3200 Energy Chain - Set of 2, 6-/8"" Width Assembled Chains 2 2 HR-3231 Energy Chain - Moving KMA Bracket For 6-/8"" Width Chain 26 2 HR-3232 Energy Chain - Fixed KMA Bracket For 6-/8"" Width Chain HR-3113 Energy Chain - Crossbar For 6-/8"" Width Chain HR-3238 Energy Chain - Inside Plate For 6 /8" Width Chain HR-3239 Energy Chain - Outide Plate For 6 /8" Width Chain 30 4 HR-3106 Energy Chain - Chain Fix 1/2" Single For 6-/8" Width Chain 31 4 HR-311 Energy Chain - Chain Fix 3/8" Single For 6-/8" Width Chain 32 4 HR-3114 Energy Chain - Chain Fix 1/4" Single For 6-/8" Width Chain # REF HR-31 Energy Chain - Hose Seperator (not shown) Hydraulic Control Valve (6 Function) 34 4 HSR-0023 " Plastic Cap # REF HR-R Spread Cylinder Seal Kit (not shown) # 1 WES Light Kit (not shown) # 1 HR-0343 SMV Sign (not shown) # 1 HR-2006 Tool Box (not shown) # REF HR-2008 Width Marker Decal Set 3

6 EXTENSION ARM ASSEMBLY MODELS: 2027/30G2-6 &

7 EXTENSION ARM ASSEMBLY MODELS: 2027/30G2-6 ITEM QTY PART NO DESCRIPTION 1 1 HSR-2470 Wheel Tower Weldment - RH 1 1 HSR-2471 Wheel Tower Weldment - LH 2 2 HR Wheel Tower Receiver (with 8 13/16" wide hole spacing) Serial #1610 & Greater REF 2 HR Wheel Tower Receiver (with 8 13/16" wide hole spacing) Serial # Less Than HSR Double Slide Weldment - RH 3 1 HSR Double Slide Weldment - LH 4 1 HR Basket Pivot Weldment - RH Serial # 1610 and Greater REF 1 HR-2478 Basket Pivot Weldment - RH Serial # Less Than HR Basket Pivot Weldment - LH Serial # 1610 and Greater REF 1 HR-2479 Basket Pivot Weldment - LH Serial # Less Than HR-0481 UHMW Pivot Plate 6* 4 HR Spindle RTM ( ) 7* 4 HR-0082 Wheel Hub w/ Bearings & Seal ( ) 8* 4 HR-0383 Spindle Seal 2" ( ) (Cross Ref National ) 9* 4 HR-0378 Inner Bearing LM01349 ( ) 10* 4 HR-0379 Inner Race LM01310 ( ) 11* 4 HR-0377 Outer Race LM67010 ( ) 12* 4 HR-0376 Outer Bearing LM67048 ( ) 13* 4 HR Spindle Washer 1" ( ) 14* 4 HR Spindle Nut 1"-14 Slotted ( ) 1* 4 HR-0384 Cotter Pin 1/8" x 2" ( ) 16* 4 HR Grease Cap (yellow zinc) ( ) * 24 HR-0380 Lug Nut 9/16" NF ( ) 18* 24 ST62 9/16" NF - 2 1/4" Stud ( ) 19 4 HR-008 Wheel 20 4 HR-0707 LT23/7R1 Road Tire (not shown) 21 4 HR /2" x 3 1/2" NC Gr. Cap Screw w/ 1/2" Grip Nut 22 2 HR-0066B Break Away Cylinder Mount Serial #1610 & Greater REF 2 HR-0066A Break Away Cylinder Mount Serial # Less Than HR-070 1/2" x 2 1/2" NC Gr.8 Cap Screw w/ 1/2" Grip Nut 24 2 HR x 8 ASAE Hydraulic Cylinder (Ram) 2 4 HR-03 Hydraulic Cylinder Pin HR /4" x 2 1/2" NC Gr.8 Cap Screw w/ 3/4" Grip Nut 27 2 HR-0472 Washer Plate 28 2 G-1.SAEFW 1 ½ SAE Flat Washer 29 2 HR ½ SAE Nylock 30 2 HSR-001 " Plastic Cap (Modified) 32 2 HR-0314 Hydraulic Cylinder Rod Clevis * 2 E-74 Complete Hub & Spindle Assembly (includes Items with *) ** R Hydraulic Cylinder Seal Kit, (Not Shown) (Ram)

8 BASKET HANGER, FRAME & LIFT ASSEMBLY MODELS: 2027/30G2-6 &

9 BASKET HANGER, FRAME AND LIFT ASSEMBLY MODELS: 2027/30G2-6 ITEM QTY PART NO DESCRIPTION 1 1 HR Basket Pivot Weldment - RH 1 1 HR Basket Pivot Weldment - LH (Not Shown) 2 1 HR Suspension Axel - RH 2 1 HR Suspension Axel - LH (Not Shown) 3 4 HR-0232 Flange Bearing 4 4 G-7-3.NCCS 3/4 x 3 1/2 HHCS 4 G-7NCHGN 3/4 Hex Grip Nut 6 4 HR-2003-B Adjustable Link 7 4 HR Clevis Bolt, Bottom (Greasable) 8 2 HR x 6 Hydraulic Cylinder (Ram) 9 4 HR Parallel Arm 10 4 HR Clevis Bolt, Top (Greasable) 11 4 HR-03 Hydraulic Cylinder Pin HR-019 Cotter Pin 3/16" x 1-1/ HR-0200 Top Link 14 2 HR /2" Double Hose Clamp w/ Mounting Plate 1 8 HR-0198 Lynch Pin - 7/16" 16 8 HR-010 Pin 1 HR Basket Frame - 12' - RH 1 HR Basket Frame - 12' - LH (Not Shown) REF HR Basket Frame /2' - RH (Not Shown) REF HR Basket Frame /2' - LH (Not Shown) HR-2630 Stripper Bar (RH & LH, 10 1/2' & 12' Basket) 19 4 HR-0703 Cotter Pin 1/4" x 1-1/ HR-0314 Hydraulic Cylinder Rod Clevis G-62NCHN /8" NC Hex Nut G-62NCHGN /8 Hex Grip Nut 23 2 HR-2004-A Basket Adjustment Wrench " NC Nylock Nut # 2 HR-2007 Tooth Tool # R Hydraulic Cylinder Seal Kit, (Not Shown) (Ram) 7

10 IDLER END DRIVEN END TWIN HUB AND STAR ASSEMBLY MODELS: 2027/30G2-6 8

11 TWIN HUB AND STAR ASSEMBLY MODELS: 2027/30G2-6 ITEM QTY PART NO DESCRIPTION 1 2 HR-0647 Reinforcing Plate 2 1 HR-4162 Knuckle Assembly w/hub - RH 2 1 HR-4163 Knuckle Assembly w/hub - LH 3 4 HR G2 Star Wheel (6 Bar) 4 12 HR-4130 Tine Bar - 12 ft w/bearings 4 REF HR-4120 Tine Bar /2 ft w/bearings (Not Shown) 300 HR /8 x 2-1/2 HHCS HR /8 Lock Nut 7 10 HR-0168 Right Hand Rake Tooth 7 10 HR-0169 Left Hand Rake Tooth (Not Shown) 8* 24 HR-06 3/4 NC x 4 HHCS 9* 24 HR-04 Tine Bar Long Spacer 10* 48 HR-02 Tine Bar Bearing Z904 11* 24 HR-0184 Tine Bar Shim Washer 12* 24 HR-03 Snap Ring 13* 24 HR-07 Tine Bar Small Spacer 14* 24 HR-0 Dust Shield 1* 24 HR-08 3/4 NC Lock Nut G-STN-09 1/2"-20 NF Lug Nut 10 G-ST-04 1/2"-20 NF - 2 1/4" Stud 18 2 G-SL- Bearing Seal (RTM SL-) 19 2 G-LM4848 Inner Spindle Bearing LM G-LM4810 Inner Bearing Race LM HR-0377 Outer Bearing Race LM HR-0376 Outer Spindle Bearing LM HR /4 Spindle Washer (RTM SW-70) 24 2 HR-037 Grease Cap 2 2 HR-262 Knuckle Spindle Weldment 26 2 HR-381 Spindle Nut 3/4 NF Slotted (RTM SN-70) 27 2 HR-0384 Cotter Pin /32 x 1 1/ HR-260 Knuckle Base Plate RH 28 1 HR-261 Knuckle Base Plate LH (Not Shown) 29 2 HR-263 Knuckle Pin 30 2 HR-019 Cotter Pin 3/16 x 1-1/ HR-264 Hub w/studs, Bearings and Seal 32 2 HR Hydraulic Motor, Heavy Duty, White #0037A120AAAAA (SER# ) REF 2 HR Hydraulic Motor, Extra HD, White #00470A120AAAAA - Option (SER# ) REF 2 HR Hydraulic Motor, Std. Eaton ( ) (SER# ) REF 2 HR Hydraulic Motor, High Torque, Eaton # (Option) (SER# ) 33 2 HR /16" x 1/4" Key Stock 1 1/4" Long 34 2 HR-2369 Adapter Housing 3** 2 HR-231 Jack Shaft 1-1/4" 36** 2 HR-036 3/8 Key Stock - 2" 37** 2 HR-232 Bearing Housing 38** 4 HR-03 Bearing CSA ** 2 HR-0363 Spacer 40** 2 HR-034 Snap Ring 41** 2 HR-2361 Drive Hub Assembly w/studs 42** 10 G /2"-20 NF - 2" Stud 43 2 HR /2 Slotted Nut 44** 2 HR Cotter Pin 1/4 x 2 4** 2 HR-0368 Machined Washer 2-1/2" OD x 1-1/2 ID X 3/16" * REF HR-412 Tine Bar Bearing Assembly ** 2 HR-4361 Bearing Housing Assembly REF HR Seal Kit For all White Motors # (SER# ) REF HR Seal Kit For Eaton Motors ( ) (SER# ) 9

12 GAUGE WHEEL ASSEMBLY (optional) HR-612-G3 & HR-712-G

13 GAUGE WHEEL ASSEMBLY (optional) HR-612-G3 & HR-712-G3 ITEM QTY PART NO DESCRIPTION 1 1 HR-248-R Pivot Bracket Assembly - RH 1 1 HR-247-R Pivot Bracket Assembly - LH (not shown) 2 2 HR-2660 Pivot Arm Weldment 3 2 HR-2490 Rubber Tire 4 4 HR-0487 Plastic Bearing Insert 4 HR /4" SAE Flat Washer 6 2 HR-0486 Spring 7 2 HR /4" NC Nylock Nut 8 2 G-P71111 Pin w/keeper 9 2 HR-038 Seal - National HR-0386 Bearing - L HR-0387 Race - L HR-0403 Slotted Nut 13 2 HR-019 Cotter Pin 14 2 HR-0388 Cap on 4 Hub w/races 16 2 HR Backing Plate 2 HR Clamp Plate /2" X " Gr. USS HHCS /2" Gr. B USS Lock Nut 11

14 HR-800 ANGLE STOP ASSEMBLY

15 HR-800 ANGLE STOP ASSEMBLY FOR MODELS: G2 & G3 ITEM QTY PART NO DESCRIPTION 1 2 HR-0066B Angle Stop Mount 3 2 HR-081 Inner Slide Shaft 4 2 HR-082 Outer Slide 2 HR-083 Stop Collar Sleeve 6 2 HR-03 1" Pin 7 2 P /2" Pin w/keeper 8 2 HR /16" Lynch Pin 10 2 HR-0487 Plastic Bearing Insert 13

16 HYDRAULIC FLOW CONTROL MODELS: 2027/30G2-6 &

17 HYDRAULIC FLOW CONTROL MODELS: 2027/30G2-6 ITEM QTY PART NO DESCRIPTION 1 1 HR-0391 Hyd Flow Control Manifold w/cartridges 2 1 HR-0392 Flow Control Cartridge, Adjustable 4-8GPM 3 1 HR-0393 Flow Control Cartridge, Fixed 4GPM 4 1 HR-039 Motor Relief Valve PSI 1 HR-0396 Hyd Flow Control Manifold REF REF HR-0392-SK Seal Kit 1

18 HYDRAULIC SCHEMATIC-6 FUNCTION MODELS: 2027/2030G2-, 6 & T1 P RH EXT. CYL LH EXT. CYL FRONT BULKHEAD C13 C12 C11 C10 C9 C8 C6 C C4 C3 C2 C1 P T BOTTOM TOP BOTTOM 123 TOP REAR 128 BULKHEAD

19 HYDRAULIC SCHEMATIC - 6 FUNCTION (optional) MODELS: 2027/30G2-6 ITEM QTY PART NO DESCRIPTION HR-0391 Hydraulic Manifold 1 HR-0392 Adjustable Flow Cartridge 4-8 GPM (not shown) 1 HR-0393 Fixed Flow Cartridge 4 GPM (not shown) 1 HR-039 Motor Relief Valve PSI (not shown) HR Check Valve (HR-0284 Used 2013 and earlier) Hydraulic Control Valve (6 Function) *option HR Spread Cylinder Without External Hydraulic Line, Ram 10 2 HR " x 8" Hydraulic Cylinder (Ram) HR " x 6" Hydraulic Cylinder (Ram) HR Hydraulic Motor, Heavy Duty, White #0037A120AAAAA (SER# ) 2 HR Hydraulic Motor, Extra HD, White #00470A120AAAAA - Option (SER# ) 2 HR Hydraulic Motor, Std. Eaton ( ) (SER# ) 2 HR Hydraulic Motor, High Torque, Eaton # (Option) (SER# ) HR /2" Hydraulic Hose - 113" 2 HR Pioneer Tips (not shown) HR /2" Hydraulic Hose - 64" 1 HR /2" Adapter (not shown) 6802x8x HR /2" Hydraulic Hose - 8 1/2" 1 HR /2" Adapter (not shown) 6801x8x HR /2" Hydraulic Hose - 73" 1 HR-030 1/2" Adapter (not shown) 6802x8x HR /2" Cross Adapter HR-0708-A 1/2" Tee Adapter HR /2" Hydraulic Hose - 11" 11 1 HR /2" Hydraulic Hose - 73" HR-312 1/2" Hydraulic Hose - 70" 1 1 HR /4" Hydraulic Hose - 64" For use with HR Spread Cylinder 1 HR /4" Adapter (not shown) HR-314 3/8" Hydraulic Hose - 78" HR /4" Hydraulic Hose - 62" For use with HR Spread Cylinder 1 HR /4" Adapter (not shown) HR /4" Hydraulic Hose - 7" HR /4" Hydraulic Hose - 69" HR /4" Hydraulic Hose /2" 1 HR /4" Adapter (not shown) HR /8" Hydraulic Hose - 77" HR /4" Hydraulic Hose /2" 1 HR /4" Adapter (not shown) HR /4" Hydraulic Hose - " HR-313 1/4" Hydraulic Hose - 67" HR /2" Hydraulic Hose - 118" HR /2" Hydraulic Hose - 240" HR /2" Hydraulic Hose - 242" HR /8" Hydraulic Hose - 206" HR /4" Hydraulic Hose - 160" HR /4" Hydraulic Hose - 1 1/2"

20 ITEM BILL OF MATERIALS QTY DESCRIPTION 1 BARREL WELDMENT 1 SHAFT WELDMENT 1 GLAND 1 STOP TUBE 1 PISTON 1 LOCKNUT, 3/4-16 UNF, GRADE C 1 SEAL, PISTON, PSP-A, #330, SEAL, O-RING, NBR70A, #210, 0.70 x x ROD SEAL, U-CUP, 1.20 x 1.62 x SEAL, O-RING, NBR70A, #330, 2.12 X 2.00 X SEAL, BACK-UP, URETHANE, #330, 2.12 x 2.00 x SEAL, WIPER, CASED, 1.20 x x 0.188, NITRILE PART NO. R07907 R R R R R30000 R R R R R R TOLERANCES UNLESS OTHERWISE SPECIFIED DECIMAL X.X ±0.060 STRAIGHTNESS ±.00 IN " X.XX ±0.030 SQUARENESS ±.010 IN " X.XXX ±0.01 PARALLELISM ±.010 IN " FRACTIONS ±1/16 CONCENTRICITY TIR ANGLES ±3 TRUE POSITION ±0.00 SURFACE FINISH 12 IN Ra FILLETS & ROUNDS R0.01 UNLESS SPECIFIED DRAWN BY: ALL INFORMATION SHOWN IS PROPRIETARY AND CAN NOT BE REPRODUCED WITHOUT PERMISSION FROM RAM INDUSTRIES INC. KStrelioff 1/3/2013 DLammers 1/3/2013 TITLE 1/3/2013 B CHECKED BY: APPROVED DLammers SIZE SCALE RAM INDUSTRIES INC. YORKTON, SASKATCHEWAN, CANADA PARTS 3RD ANGLE PROJECTION PART NO: R PARTS REV 0 SHT 1 of 1 CREATED in AUTODESK INVENTOR

21 19

22 20

23 21

24 22

25 FASSE VALVES SEVEN ROVAR PARK KEARNEY, NE MNTR TOG7 SQFLRCPT 16PC(1) 4.' FSCM NO. SCALE: 1:4 DWG. NO SHEET: 1 OF 2 23 WHT SW1 RED SW4 23 YEL SW 12 LT BLU SW2 FRONT VIEW GRN SW3 1 GRY SW BLU SW BACK VIEW " 32 4 '-6" 4'-6" 30 3 PARTS LIST NO. PART NUMBER QTY PART DESCRIPTION SCREW PHIL PAN #6-32X3/8" BLK SCREW INSERT BRASS #6-32X3/8" KNOB FEMALE 1/4" SCREW WELDED 1/4"-20X.62" WASHER NYLON FLAT 1/4" CABLE TIE BLK 8." BRKT MNTR BLK AL BAG POLY 9X12 3MIL LOGO DECL S/N SILVER DECAL FASSE BLK/GOLD 1"X.7" RND CRNR SW TOG DPDT 3P MOM LONG BOOT TOG 1/32" OPN BLK ' WIRE 18GA BLK ' WIRE 18GA RED ' WIRE 18GA GRN DIODE RECTIFIER 6A0-T 6A 0V SILICON R TRM PO T-TAP F 18-14GA TRM PO F INS 22-18GA TRM SPLICE CLOSED END 16-18GA TRM PO M/F 16-14GA TRM PO F INS 16-14GA STR RLF HEYCO.4"-.70"ID, HOLE DIA 1.11" GRIP TOG VNYL WHT.187" GRIP TOG VNYL RED.187" GRIP TOG VNYL BLU.187" GRIP TOG VNYL YEL.187" GRIP TOG VNYL GRN.187" GRIP TOG VNYL GRY.187" GRIP TOG VNYL LT BLU.187" HRN 1CON 18GA AMP SQFLRCPT 16P(1) ' DIODE ASSY 6A.' HRN 2CON 16GA R/B ZIP 10A FUSE 7' ENCL DRILL FP MNTR SW7 NORTHSTAR ENCL DRILL MNTRBX 1 1/8" STR RLF SWITCH NOTCH ORIENTATION NOTES: 1. USE 2 CABLE TIES TO COIL UP HARNESS. 2. PUT REMAINING CABLE TIES IN BAG. NOTCH LOCATION REVISIONS REV. DESCRIPTION FORM # DATE APPROVED RELEASED DRAWING /19/1 LFL BWL A REVISED WIRING DIAGRAM, SHEET /3/1 LFL BWL B WAS QTY 3, WAS , WAS , DEL /14/1 LFL BWL UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ON: 2 PL DECIMALS 3 PL DECIMALS ANGLES FRACTIONS INITIALS DATE DRAWN LFL 8/18/201 CHECKED BWL THIS DRAWING IS A PROPIETARY DESIGN BY FBS CORPORATION/FASSE VALVES AND IS SUBMITTED UNDER A CONFIDENTIAL RELATIONSHIP, EXCEPT FOR USES EXPRESSLY GRANTED IN WRITING, ALL RIGHTS ARE RESERVED BY FASSE VALVES. 8/18/201

26 dwg 2/1/2010 4:4:1 PM Scaled to fit 24

27 BLK (ZIP) BLK RED (ZIP) FASSE VALVES SEVEN ROVAR PARK KEARNEY, NE MNTR TOG7 SQFLRCPT 16PC(1) 4.' FSCM NO. SCALE: 1:4 DWG. NO SHEET: 2 OF 2 SWITCH WIRING DIAGRAM SW3 GRN 13 SW2 LT BLU SW1 WHT BLK 1 GRN BLK/WHT GRN ORG/BLK SW7 BLU SW6 GRY SW YEL SW4 RED GRN/BLK BLU ORG RED 14 RED/BLK RED/WHT WHT/BLK RED WHT BLU/WHT GRN/WHT BLU/BLK UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES TOLERANCES ON: 2 PL DECIMALS 3 PL DECIMALS ANGLES FRACTIONS INITIALS DATE DRAWN LFL 8/18/201 CHECKED BWL THIS DRAWING IS A PROPIETARY DESIGN BY FBS CORPORATION/FASSE VALVES AND IS SUBMITTED UNDER A CONFIDENTIAL RELATIONSHIP, EXCEPT FOR USES EXPRESSLY GRANTED IN WRITING, ALL RIGHTS ARE RESERVED BY FASSE VALVES. 8/18/201

28 LIMITED WARRANTY NORTHSTAR expressly warrants each new Twinstar Rake to be free from defects in material and workmanship under normal use and service for a period of one year after delivery to the original retail purchaser or first user of the product. Our obligation under this warranty is limited to repairing and/or replacing, at our option, any part or parts within the applicable one year period, as set out above, which shall be returned by the owner to any Twinstar authorized dealer or to the factory and which upon examination shall disclose to our satisfaction to be defective. We may, as an option, elect to grant adjustments in the field through an authorized representative and may thereby elect to waive the requirement that parts be returned to our factory. A new warranty period is not established for replacements. Replacements are warranted for the remaining portion of the one-year original warranty period. The repair or replacement of defective parts under this warranty will be made without charge to the owner except for transportation. Warranty does not cover tires, hydraulic valves, hydraulic cylinders, electric switches, or accessories and other parts not manufactured by us but supplied with or as a part of our product. We will, however, obtain and pass on any adjustments provided by the manufacturers of such parts under those manufacturer's warranties. The provisions of this warranty do not apply to any product or parts, which have been subject to misuse, negligence or accident, or which have been repaired or altered outside of an authorized dealer in any way so as in the judgment would adversely affect its performance and reliability. Neither does this warranty apply to normal maintenance service and parts, or to normal deterioration due to wear and exposure. WARRANTY VOID IF NOT REGISTERED WITHIN 30 DAYS OF PURCHASE DATE

29

30 ATTACHMENTS, LLC 320 Bay Street Union Gap, WA P.O. Box 1937 Yakima, WA Phone: (09) Fax: (09)