Backtrack Railway Services
|
|
- Shana Weaver
- 6 years ago
- Views:
Transcription
1 Backtrack Railway Services products and services for an ever changing railway industry 55 Corriveau Ave St. Albert Alberta Edgeley Blvd Concord Ontario
2
3 Track Maintenance Accessories Rail Head-Loss Gauges High-precision 100 lbs / 115 lbs lbs / 136 lbs Standard 85 lbs lbs (ARA-A) lbs (ARA-HF) lbs (RE-HF) lbs lbs lbs Wedge (new style) Wedge (old style) Template pouch SpikeFast Tie-Plugging Products Chemical Cartridge (case of 12) Pail, ES25 Resin (20L) Pail, ESISO (20L) Dispensers Manual canister applicator Electric canister applicator Accessories Mixing tube (hand-held applicator) Mixing tube (track machine applicator) Maintenance kit (track machine applicator) Grease for gun (track machine applicator) Nitrile gloves Thermometers Thermometers Track thermometer (magnetic) Non-contact thermometer (infrared)
4 Track Maintenance Accessories (continued) Markers Chalk White chalk (1 x 4 ) Yellow chalk (1 x 4 ) Crayon White lumber crayon Yellow lumber crayon Paint Black valve action paint marker White valve action paint marker Yellow valve action paint market Solid paint White solid paint marker Yellow solid paint marker Miscellaneous Broom Switch cleaning broom (with pick) Drift pins Drift pin (85 lb. rail) Drift pin (100 lb. rail) Drift pin (136 lb. rail) Drill Bits Auger bit (11/16 x 18 x 7/16 Hex) Auger bit (16/20mm, for On-Track drill) Auger bit (5/8 x 8 ) Gauge rods Single jaw, non-insulated Single jaw, insulated Handles Spike maul handle Adzer handle Pick handle Lifting Devices Rail tongs (3 Ton) Spreader bar (4 x 4.5 with two 3 slings and two 1-1/2 Ton hooks) Speader bar (same as above, with 2 sets of 3 Ton rail tongs) Tie counter Tally register
5 Abrasive Discs & Stones Cutting Discs 14 Fast cut wheel (for rail saw) Fast cut wheel (for rail saw) Slotting wheel Grind Stones 5 Cup stone (for hand-held angle grinder) Cup stone (for MP12 profile grinder) Stone (for UG) Stone (for MC2/MC3) Chain Saw Accessories Lubricants Sharpeners 3/16 Chain sharpening kit /32 Chain sharpening kit /32 Chain sharpening kit Flat files (pkg. of 12) /32 Round files (pkg. of 12) /16 Round files (pkg. of 12) /32 Round files (pkg. of 12) Chain oil Chain oil (summer) Chain oil (winter) Guards Saw bar guard (18-22 bars) Saw bar guard (13-16 bars) Grease Hydraulic Impact Grease Master 35 Impact Grease White Lubriplate Grease Oil 2-Cycle Oil (mixes 10 liters) Cycle Oil (mixes 20 liters) W Oil for Pionjar / Ski-Drill Gear Oil for Gas Impact Gear Oil for Rail Drill
6 Impact Sockets 8 Point - Heavy Duty size drive part number size drive part number 1 5/ / / / / / / Point - Heavy Duty size drive part number size drive part number 3/ / / / / / / Special Purpose and Accessories Sockets Rectangular socket (28mm x 21mm) Extensions 3 Extension (1 drive) Extension (1 drive) Extension (1 drive) Extension (1 drive) Adapters Universal Joint (1 drive) /4 to 1 Male Adapter Retainers Retaining Ring ( ) Retaining Ring ( ) Retaining Ring ( )
7 Hydraulic Tool Accessories Dust caps Hydraulic fitting dust cap (male) Hydraulic fitting dust cap (female) Fittings Quick coupler, hydraulic (male) - 1/ Quick coupler, hydraulic (female) - 1/ Quick coupler, hydraulic (male) - 3/ Quick coupler, hydraulic (female) - 3/ Hoses Hydraulic hose set (50 ft., with couplers) Pigtails Hydraulic hose for most Stanley products Hydraulic hose for Stanley impact wrench Hydraulic hose for Matweld tools Tamping Tools Tools: Stanley Tie Tamper TT46 Tools Tamping tool Tamping tool Ice chisel 2 x Pin driver BR67 Tools Broken screw spike driver (short) Broken screw spike driver (long)
8 Rail Drill Accessories Stanley RD12 Bits Bit holder 1-1/ Bit holder 1-3/ Bit holder 1-1/ Bit holder 1-5/ Bit holder 1-1/ Inserts Carbide inserts (box of 10) Screwdriver (T-10, for inserts) Templates Template set 85/100 lb RE (double sided) Template set 100 lb RA (single sided) Template set 115 lb (single sided) Template set 115/136 lb (double sided) Template set 136 lb (single sided) Water tank Water tank (pressurized, w/coupler) Geismar PR3/PR8 Bits Flat bit 1-1/ Flat bit 1-3/ Flat bit 1-1/ Flat bit Flat bit 1-1/ Chuck (for use with flat bits) Pin (use with chuck) Templates Template 85 lb Template 100 lb Template 115 lb Template 132/136 lb Indexing plate 85 lb Indexing plate 100 lb Indexing plate 115 lb Indexing plate 132/136 lb
9 Equipment Maintenance Hydraulic Power Packs Stanley HPR2 Air filter (paper inner) Air filter (foam outer) Fuel filter Engine oil filter Hydraulic oil filter Tune-up kit Spark plug Matweld 0100 Geismar DC5/10 To help us find your part, please call with engine manufacturer and model number. Impact Wrench: Bance LEM 350 Mk II (STIHL TS-360) Air filter (inner) Air filter (outer) Fuel Filter Spark plug Anvil Hammer Impact Wrench: Geismar MIW 800/850 MIW 800 (Olympyk) MIW 800 (STIHL) MIW 850 (Olympyk) MIW 850 (STIHL) Air filter Fuel Filter Spark plug Anvil Hammer
10 Equipment Maintenance (continued) Impact Wrench: Master 35 / Bance LEM 350 Mk I Air filter Air filter Cover Fuel Filter Spark plug Oil Sight Glass Anvil Hammer Recoil Spring Recoil Assembly (complete) Carburetor Carburetor repair kit Rail Profile Grinder: Geismar MP12 w/bernard Air filter Fuel Filter Spark plug Belt
11 Equipment Maintenance (continued) Rail Saw: MTX 45/55 - Husqvarna Engine Air filter (paper filter) Air filter (washable foam filter) Spark plug Belt Fuel filter Carburetor repair kit Recoil spring Recoil assembly (complete) Rail Saw: MTX 45/55 - Olympyk Engine Air filter (paper filter) Air filter (washable foam filter) Spark plug Rail Saw: MTX 45/55 - STIHL Engine Air filter (inner) Air filter (outer) Spark plug Belt guard Recoil spring Drive belt Muffler guard Wing nut (for air cleaner cover) Fuel filter Carburetor Carburetor repair kit Recoil / tank assembly
HYDRAULIC TRACK TOOLS
HYDRAULIC TRACK TOOLS SERVICE TRAINING INNOVATION POWER UNITS GRINDERS WELD SHEARS RAIL SAWS DRILLS IMPACTS SPIKE PULLERS SPIKE DRIVERS TAMPERS OTHER RAIL PRODUCTS V1.9.13 A m e r i c a n - m a d e t o
More informationALLTRADE & POWERBUILT NEW PRODUCT (SOME SHELF LIFT ITEMS)
AT-020014 IMPACT WRENCH 19.2V KAWASAKI 1\10 $59.00 11 AT-040013FC PLIERS SET 2PC X-DUAL HEAD (DISPLAY) 4-8\10 $7.95 253 AT-150017 UTILITY KNIFE, FOLDING, QUICK RELEASE (DISPLAY) 20- $2.95 99 AT-150030
More informationElectric Power Tools Created :05 Revised :08 Page 1
2005 Created 01.08.2005 11:05 Revised 02.08.2005 10:08 Page 1 INDEX Article Group Page Electric Hoists 3 Chain Hoist 3 Pneumatic Hammer Drills 4 Electric Hammer Drill 5 Paint and Mortar Mixer 5 Electric
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationThe Rail Cap allows a train to travel over broken rails with up to 125mm of separation at a maximum speed of 15km/hour.
Rail Anchor Part No. 1121023 Mobile Sliding Anchor Point, ideal when working at heights Rail Cap Part No. 1121206 The Rail Cap allows a train to travel over broken rails with up to 125mm of separation
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2505 Lowering Spindle Assembly Installation Instructions ½ TON SILVERADO
More informationAir Compressor Pumps. Best Pump Warranty In The Industry. Single Stage Cast Iron Compressor. Two Stage Cast Iron. Compressor C B
106 South Lake Court, Lexington, SC 29073 Tel: 803-356-4777 Fax: 803-356-4737 Air Compressor Pumps Best Pump Warranty In The Industry The Mi-T-M Pump Exchange Program provides pump replacement for the
More informationRECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 1 09010-3C100 Hexagon Wrench Set (09013-6C100) ( Wrench 5 ) (09013-6C110) ( Wrench 6 ) (09013-6C120) ( Wrench 8 ) (09013-6C130)
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More informationSONIC GM Express Service Tool Kit*
SONIC GM Express Service Tool Kit* Drawer 1 E107901 Empty Foam for the 26" SFS 79pcs 1/4" Combination Socket Set & Screwdrivers 1 ea 1310 Screwdriver, PH.0 1 ea 1311 Screwdriver, PH.1 1 ea 1312 Screwdriver,
More informationUTSTYR SEPTEMBER 2013
UTSTYR SEPTEMBER 2013 1) PARTSMASTER ANGLE GRINDER 125MM - VARIABLE SPEED 86200600 2) PARTSMASTER ELECTRIC DIE GRINDER - VARIABLE SPEED 86010003 3) PARSMASTER VARIABLE SPEED MULTI-TOOL 86100000 4) ADAPTER
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description HR3200C, HR3210C, HR3210FCT Rotary Hammer 32mm (1-1/4") CONCEPT AND MAIN APPLICATIONS HR3200C series models have been developed as successor models of HR3000C,
More information3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio
3400 Gas Saw Page 1 of 25 Bow Guide & Chain Informatio 44235 13".050/ 3/8 pitch, P760-80 Bow Guide 51293 13".050/ 3/8 pitch, P760-80 Chain 44236 14".050/ 3/8 pitch, P760-87 Bow Guide 51294 14".050/ 3/8
More informationIllustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 62BN24C Orbit-Air Applicator 21.9 Cu. Ft. (.62m 3 ), 1000-Lb Capacity,
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationPrinted from MediaCat
Illustration A Crankcase, Cylinder Illustration A Crankcase, Cylinder Ref.Nr. Item code Quantity Description 1 1113 020 2107 1 Crankcase (1,2,4,5,7,8) 2-11 1 1113 020 2108 1 Crankcase (3,6) 2-11 2 1113
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680ES Gas Concrete Saw Effective July, 0 I TABLE OF CONTENTS 680ES Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC Gas Saw Service Items n/a Starter Assembly
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680ES Gas Concrete Saw Effective July 1, 2015 I TABLE OF CONTENTS 680ES Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC Gas Saw Service Items n/a 1 Starter Assembly
More information1 JULY ~ 30 AUGUST 2013 Micro - Tec
*All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680ES Gas Concrete Saw Effective January 1, 2017 I TABLE OF CONTENTS 680ES Gas Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC Gas Saw Service Items n/a 1 Starter
More informationINSTALLATION GUIDE RAISED AIR INTAKE ½+ ram heavy duty diesel. AEV30240AA Last Updated: 12/11/14
RAISED AIR INTAKE 2013 ½+ ram heavy duty diesel AEV30240AA Last Updated: 12/11/14 INSTALLATION GUIDE PLEASE READ BEFORE YOU START TO GUARANTEE A QUALITY INSTALLATION, WE RECOMMEND READING THESE INSTRUCTIONS
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More informationAutomotive Service Tools
Automotive Service Tools Part 1 by: Ed Nutter The following document shows the tools that I use to keep my vehicle on the road. You don't have to buy all these tools at once I've been collecting them for
More informationDrawing A Crankcase 041 AV SCS
Drawing A Crankcase 1 Drawing A Crankcase Reference Item number Qty Description 1 1110 020 2105 1 Crankcase 2-5, 9, 10, 12 2 9371 470 3120 2 Cylindrical pin 6x20 3 9048 216 1010 8 Pan head screw M5x18
More informationMELVELLE EQUIPMENT CORP PTY LTD
Email:- Sales@melvelle.com.au Web: www.melvelle.com.au Phone: +61 2 49515 244 Rail Catalogue Edition 03 MELVELLE EQUIPMENT CORP PTY LTD Email:- Web: Sales@melvelle.com.au www.melvelle.com.au Phone: +61
More informationTrident Universal. Installation Manual
Trident Universal Installation Manual Revision 1.1; Updated: July 6, 2017 Table of Contents Tool List 03 Installation Tool List Pre-Install Preparation 04 Lateral Panel Modifications 07 Top Panel Modifications
More informationFOG LAMPS INSTALL KIT
FOG LAMPS INSTALL KIT PT CRUISER INSTALLATION INSTRUCTIONS Read entire instructions thoroughly before starting. For proper aiming of fog lamps, follow procedures in the service manual. NOTES: Left and
More informationGP-II 10/16/2013 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
GP-II PAGE GP II DECK SUB ASSEMBLY 3 8 36 3 2 9 6 29 39 3 22 5 38 3 25 39 30 3 6 33 27 2 27 23 0 20 2 26 35 2 27 2 3 7 28 32 2 37 28 9 2 5 0 7 8 3 39 3 PAGE 2 GP II DECK SUB ASSEMBLY ITEM NO. PART NUMBER
More informationLGT-312L E-Z-Go TXT Light Bar Bumper Kit Installation Instructions
LGT-312L E-Z-Go TXT 2014+ Light Bar Bumper Kit Installation Instructions Caution: Please read through the instructions carefully. Before starting this project, remove the system s positive and negative
More informationXL12 Chain Saw UT Page 1 of 21 Carburetor Chamber
XL12 Chain Saw UT-10080 Page 1 of 21 Carburetor Chamber XL12 Chain Saw UT-10080 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More information14 Miscellaneous tools
14 Miscellaneous tools Bench vice 249 Suction lifter 251 Telescopic 252 mirror Wire guide 252 Puller 254 Multi-tool 257 Riveter 258 Oil filter wrench 260 Electric welder 261 Mortar Glue gun 261 Caulking
More informationReplacement Parts & Accessories Price List
Replacement Parts & Accessories Price List 680ES Petrol Concrete Saw Effective January, 08 I TABLE OF CONTENTS 680ES Petrol Concrete Saw ITEM DESCRIPTION KEY PAGE 680GC Petrol Saw Service Items n/a Starter
More informationAdjustable Light Kits E-Z-Go TXT All Models Installation Instructions
Adjustable Light Kits E-Z-Go TXT All Models 1996-2013 Installation Instructions Caution: Please read through the instructions carefully. Before starting this project, remove the system s positive and negative
More informationRECOMMENDED TOOLS AND CHECKERS
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 : An impact wrench can be used with tools with this mark. As tools without this mark are meant to be operated manually,
More information1/2 Air Impact Wrench P/N IR 2235TiMAX-2 With 2 Anvil, Weighs Only 4.9 lbs ft.-lbs. torque. 3/4 Super Duty P/N IR 261
37 Order NLINE www.midwestwheel.com CATALOG NUMBER Ingersoll Rand Air Tools & Accessories 3/8 Air Impactool IR 2115TiMAX The best power-to-weight ratio in its class 300 ft.-lbs. torque Enhanced power settings
More informationCORDLESS TOOLS GD_PG_$KT-K10-$KP-AKTE-$PG-UMAKK :37:27
CORDLESS TOOLS CORDLESS REVERSIBLE RATCHET Cordless reversible ratchet Cordless reversible ratchet With torque control Drive: 1/4" 220 U/min. 33 Nm 5 A - 1,5 Ah Drive: 1/2" 180 U/min. 50 Nm 5 A - 1,5 Ah
More informationIllustrated Parts and Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060
Illustrated Parts and Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Page 1 of 30 Phone: 800-443-2476 / 507-451-5430 www.gandy.net / Email: sales@gandy.net 6231DS16F Orbit-Air Applicator
More informationLime Spreader. Model SL6. Illustrated Parts Breakdown. Front Hydraulics Rear Hydraulics Manifold Components. Spinner Assembly
Lime Spreader Model SL Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Front Hydraulics Rear Hydraulics Manifold Components Floor & Apron Axle Assembly Apron Drive
More informationNEW PRODUCTS GUIDE EDITION Oil Filter Remover Set 21 Piece. Oil Filter Remover Set Truck 6 Piece
EDITION 1. 2015 NEW PRODUCTS GUIDE 305900 Oil Filter Remover Set 21 Piece Professional 21 piece set supplied in blow mould storage case Manufactured from premium aluminium material to provide a long service
More information2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete E
BILLET GRILLS IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2011 Cadillac CTS Coupe EGX Exhaust Tip & Rear Valance Mesh Accent Kit Part #: Complete 5122-1900-11E TOOLS REQUIRED Automotive
More informationLAND ROVER DISCOVERY 3/ SPARE WHEEL CARRIER
LAND ROVER DISCOVERY 3/ 4 SPARE WHEEL CARRIER RBLD007 INSTALL TIME: 4.5 Hours NOTE: Park Distance Control will be affected by this fitment and the customer should be informed. IMPORTANT WARNING! IT IS
More informationUnit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule
More informationG & P ONE GRINDER 8/6/2013 COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
G & P ONE GRINDER PAGE 1 G & P ONE GRINER DECK SUB ASSEMBLY PARTS BREAK DOWN 6 17 15 8 14 9 6 5 16 1 0 8 4 1 7 9 40 10 9 5 6 9 9 9 8 18 9 9 9 19 9 9 1 11 4 9 0 5 5 0 6 5 8 7 4 7 7 1 41 STONEKOR LLC 1-800-6-0519
More informationM MAC /77 to 02/83 IPL R2 Page 1 of 16 Tools & Accessories K&T Saw Shop or
11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories 11-600016M MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester 91485 Wrench -
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 44415 2011 CIVIC 4-DOOR Issue Date AUG 2010 PARTS LIST Trunk spoiler 2 Cap nuts 2 Screws Left trunk spring (marked yellow) Right trunk
More informationRecommended Maintenance Procedures for the Cutters Edge MULTI-CUT 2100 Series Fire Rescue Saw
Recommended Maintenance Procedures for the Cutters Edge MULTI-CUT 2100 Series Fire Rescue Saw 2 Outer section Adjustment Knob Remove and Clean ToolLess Guard/Depth Gauge Unscrew Adjustment Knob, remove
More informationLightweight and Powerful Chain Saws for Home, Garden and Lifestyle Block
Lightweight and Powerful Chain Saws for Home, Garden and Lifestyle Block Photo: 35.2mL 32.0mL 2-stroke engine 35.0mL High power and low fuel consumption The most lightweight powerful and dependable chain
More informationWK2 SNORKEL. Installation Instructions PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU START
WK2 SNORKEL Installation Instructions PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU START Please note: This kit is specifically for diesel models only. WK2 Snorkel Installation Instructions Rev.
More informationLitter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown
Litter Spreader Models SP00, SP0, SP00, SP0 Illustrated Parts Breakdown Page Front End Page Hydraulic System (w/ Side Mounted Reservoir) Page Hydraulic System (w/ Front Mounted Reservoir) Page Hydraulic
More informationQuick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")
JTC-3101 M INI AIR DIE GRINDER JTC-3321 SPOT WELD CUTTER KIT JTC-3401 1/2" HEAVY DUTY AIR M INI IM PACT WRENCH Free speed: 25000 rpm Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm
More informationAudi B5 A4/S4 Rear Wheel Bearing Service Kit
Audi B5 A4/S4 Installation Tutorial ES2561175 This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles
More informationPrinted from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211
More information8/6/2013 LX-30 MACHINES: COPYRIGHT 6/10/10 ALL RIGHTS RESERVED
LX-0 MACHINES: 00 000 STONEKOR LLC -800-6-09 customerservice@stonekor.com www.stonekor.com PAGE LX-0 GRINDER DECK SUB ASSEMBLY 0 6 7 7 9 8 8 9 8 7 6 0 9 7 8 6 7 6 8 0 6 0 PAGE LX-0 GRINDER DECK SUB ASSEMBLY
More informationIllustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 62DS12F Orbit-Air Applicator 10 CU. FT. (.28m 3 ) Hopper, 450-Lb Chemical
More informationAudi B6/B7 A4/S4 Rear Wheel Bearing Service Kit
Audi B6/B7 A4/S4 Installation Tutorial ES2561175 This tutorial is provided as a courtesy by ECS Tuning. Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles
More informationAIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER
AIR DRILL, AIR ANGLE GRINDER and AIR DIE GRINDER AIR DRILL KW0800256 3/8 Chuck, Reverse Equipped with precision chucks for excellent accuracy Precision bearing provides longer tool durability KW0800258
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification GA4030, GA4530, GA5030 Angle Grinders 100mm (4"), 115mm (4-1/2"), 125mm (5") GA4030/ GA4530/ GA5030 are small diameter
More informationInstallation Instructions for John Deere cotton stripper models:
Installation Instructions for John Deere cotton stripper models: 7445 7450 7455 IMPORTANT: Ensure the instructions you use for the installation correspond to the machine model. If you receive the incorrect
More informationBox Contents. 1.) Bumper 2.) Side Bumper Brackets 3.) Vertical Bumper Plate 4.) Lower Bumper Weldment
Installation Manual 2 Box Contents 1 3 2 4 5 6 7 (Images not shown to scale) 1.) Bumper 2.) Side Bumper Brackets 3.) Vertical Bumper Plate 4.) Lower Bumper Weldment 5.) Side Bumper Weldments 6.) Side Strap
More informationLime Spreader. Model SL6. Illustrated Parts Breakdown. Front Hydraulics Rear Hydraulics Manifold Components. Spinner Assembly
Lime Spreader Model SL Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Front Hydraulics Rear Hydraulics Manifold Components Floor & Apron Axle Assembly Apron Drive
More informationTOYOTA YARIS HATCHBACK INTERIOR LIGHT UPGRADE Preparation
Preparation Part Number PTS21-52062-08 NOTE: Part number of this accessory may not be the same as the part number show Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide
More informationEnd of the Year Sale - great savings! 4-1/2" 6 Amp Small Angle Grinder with Sealed Switch Includes: Grinder, Cut-off disc, Sanding discs, Wire cup brush, Wire cup wheels, Side handle, Adjustable guard,
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description DP4010, DP4011 2-Speed Drill 13mm (1/2") L PRODUCT P 1/ 8 CONCEPT AND MAIN APPLICATIONS Models DP4010 and DP4011 have been developed as 13mm (1/2") Drill for
More informationREJUVENATOR /6/13
REJUVENATOR 3000 3009 STONEKOR LLC -800-33-059 customerservice@stonekor.com www.stonekor.com REJUVENATOR ENGINE DECK SUB ASSEMBLY 8 3 9 7 3 3 8 9 0 0 3 5 3 30 3 5 7 30 35 33 3 37 38 39 0 8 9 5 3 7 3 REJUVENATOR
More informationTools Online Retailer Returns - TRACY - February 16
s Online Retailer Returns - TRACY - February 16 Auction Opens: Fri, Feb 9 12:09pm PT Auction Closes: Fri, Feb 16 10:00am PT TB7000 Wheel Barrow TB7033 TB7001 Wheel Barrow TB7034 TB7002 Wheel Barrow Tub
More informationFein The Metal Industry Specialists
www.fein.com.au ENDS MAY 31 2017 Fein The Metal Industry Specialists SEE INSIDE FOR SPECIAL OFFERS MAGDRILL RANGE DUST EXTRACTION ANGLE GRINDERS COLD CUT SAW 3 8 4-5 3 FEIN: THE LEADERS IN CORE DRILLING
More informationStihl 029/MS290 to Stihl 039/MS390 Project
Stihl 029/MS290 to Stihl 039/MS390 Project Tools Needed: * 8mm socket (muffler removal) * 3" extension * 1/4" ratchet * 3/8" ratchet (used to remove clutch) * 19mm deep socket (clutch removal) * T27 torx
More informationDotco Drill Specifications
Dotco Drill Specifications Speed Drill Diameter Type Weight Length Head Height Drill Chuck rpm (Capacity) (Housing) kg mm mm Size Air Inlet NPT Series 15LF straight - (300 Watt) 15LF081-38+ 5300 1/4" C
More information330 Chain Saw UT Page 1 of 17 Chain Brake and Chain Stop
330 Chain Saw UT-10609 Page 1 of 17 Chain Brake and Chain Stop 330 Chain Saw UT-10609 Page 2 of 17 Chain Brake and Chain Stop 1 80983 3 SCREW- (8-32 x 1/2) 2 70705 1 STOP- Chain 3 88048 1 SCREW- (10-24
More informationEPIC. Connector Accessories CONNECTOR ACCESSORIES. Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands
CONNECTOR ACCESSORIES Glands, Seal Rings & Adapters Glands 412 EPIC SM & SP Glands, EPIC CM-M Glands D Series Pressure Screws 413 U Series Washers 413 Sealing Rings 413 Neoprene & Viton Concentric Sealing
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationReplacement Parts & Accessories Price List. 633GC Gas Saw
Replacement Parts & Accessories Price List 633GC Gas Saw Effective January 1, 2006 2006 ICS, Blount Inc. 4909 SE International Way Portland, OR 97222 TABLE OF CONTENTS 633GC Gas Saw ITEM DESCRIPTION KEY
More informationEdition 2 February Air Screwdrivers and Angle Wrenches. 1RL Series. Parts Information. Save These Instructions
16574568 Edition 2 February 2014 Air Screwdrivers and Angle Wrenches 1RL Series Parts Information Save These Instructions 1RL Motor and Gearing - Exploded View 7 8 3 6 4 5 2 1 50A 20A 20 17 22 12 10 1
More informationTRI-LOBULAR INSERT BITS 1/4" HEX DRIVE Length Pack Bordo Price Code MM Qty Code Each TRI-LOB TLx25
SCREW DRIVER BITS PHILLIPS INSERT BITS 27020 No.1 25 10 EXTRA HARD 2607001510 27021 No.2 25 10 EXTRA HARD 2607001514 37514 No.2 50 10 EH R/SHK 37515 No.2 75 10 EH R/SHK 27207 No.3 25 10 5/16 HEX DR 27022
More informationIllustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 815 Rice Lake Street, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 6250BN36C Orbit-Air Applicator 50 Cu. Ft. Hopper w/ 26 (1-1/4 ) Openings,
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description CONCEPT AND MAIN APPLICATIONS Specification HR2800, HR2810, HR2811F HR2810T, HR2811FT Rotary Hammers 28mm (1-1/8") HR2800 series models have been developed as
More informationPARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.
2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at
More informationSXLAO Chain Saw UT Page 1 of 21 Carburetor Chamber
SXLAO Chain Saw UT-10045 Page 1 of 21 Carburetor Chamber SXLAO Chain Saw UT-10045 Page 2 of 21 Carburetor Chamber 1 59274 1 GASKET- Spacer 2 59718 1 SPACER 3 63260A 1 RETAINER- Reed valve 4 63253 1 SEAT-
More informationTrack Inspection and Maintenance
Gauge Restraint Reader Makes FRA-mandated inspection of yard tracks easier. At a comfortable walking pace, one worker can verify no-load track gauge, then stop at intervals to apply 4000 lbs. side force
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationLexus ES Fine Mesh and Adaptive Cruise Control Fine Mesh Grilles Upper and Lower Replacements
IMPORTANT: PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE! 2013-15 Lexus ES Fine Mesh and Adaptive Cruise Control Fine Mesh Grilles Upper and Lower Replacements Part #1372-0102-13 / Black Ice
More informationTOOLS AND EQUIPMENT. C. For Specialty Tools and Equipment, the program need only have those tools for the areas being accredited.
TOOLS AND EQUIPMENT Local employer needs and the availability of funds are key factors for determining each program s structure and operation. The Program Standards recognize that not all programs have
More informationFEIN Price Catalogue machines and accessories 2017
FEIN Price Catalogue machines and accessories 2017 Welcome to FEIN your specialist in metal and interiors. FEIN is synonymous with extremely reliable application solutions for manual trades and industry
More informationSTOCKED LOCALLY STOCKED LOCALLY STOCKED LOCALLY STOCKED LOCALLY STOCKED LOCALLY STOCKED LOCALLY STOCKED LOCALLY STOCKED LOCALLY STOCKED LOCALLY
2018 FLYER FIND ALL OF YOUR MILWAUKEE TOOL PROMOTIONS INSIDE! MET# FASTENAL# Description 2703-22 2113650 M18 FUEL 1/2" DRILL/DRIVER KIT 2704-22 2113652 M18 FUEL 1/2" HAMMER DRILL KIT 2705-22 0290596 M18
More information1984 Dodge W250 PICKUP
1984 Dodge W250 PICKUP Submodel: Engine Type: V8 Liters: 5.2 Fuel Delivery: CARB Fuel: GAS Dana 44 MODELS THROUGH 1984 2. Raise and safely support the vehicle, then remove the wheel hub and bearings as
More informationPower Equipment
Power Equipment - 445 - Power Equipment T80900 1100w 19m Weldon Shank Auto-Reverse Tapping & Core Drill Machine Fully Mechanical tapping with automatic reversing controlled by crank motion Two-mode gear-box:
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC8000 P R O D U C T S. (Revised )
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC8000 (Revised 10-15-2002) Table of Contents Page Saw Controls Legend. 3 Drawing 1. Frame Group. 4-5 Drawing 2. Arm Assembly... 6-7 Drawing 3. Hydraulics
More informationX4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY
2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 1 of 80 AIR INTAKE ASSEMBLY 2000 300 2X4 (GREEN) (A2000ATF2AUSG) Page 2 of 80 AIR INTAKE ASSEMBLY Ref # Part Number Qty S/P/F Description 1 3570-001 1 /P Intake,
More informationSTANLEY INFRASTRUCTURE CE PRODUCTS CATALOGUE
2016-2017 STANLEY INFRASTRUCTURE CE PRODUCTS CATALOGUE www.stanleyhydraulic.com www.stanleyhydraulics.com COMPANY OVERVIEW GREAT BRAND GREAT TOOLS Stanley Hydraulic Tools has a proud tradition of being
More informationK&T Saw Shop or
12-600104D MAC 140 01/81 to 03/83 IPL 215273-R1 Page 1 of 14 Tools & Accessories www.ktoutdoor.com 12-600104D MAC 140 01/81 to 03/83 IPL 215273-R1 Page 2 of 14 Tools & Accessories 93090 Guide - Timing
More informationCUT, SAW, DRILL, TAMP, HAMMER, DRIVE, DIG, PUMP, POUND, GRIND,
CUT, SAW, DRILL, TAMP, HAMMER, DRIVE, DIG, PUMP, POUND, GRIND, YOUR WAY THROUGH THE DAY. HYDRAULIC TOOLS & EQUIPMENT CATEGORY HYDRAULIC POWER TOOLS YEAR 09-10 FORMAT PRODUCT CATALOG Hydraulic Tools HYDRAULIC
More informationREPAIR KITS AND PARTS
REPAIR KITS AND PARTS INGERSOLL-RAND REPAIR KITS AND PARTS Even the most durable and reliable tools need preventive maintenance. You ll keep things running strong and maximize your productivity with Ingersoll-Rand
More informationA* CHAIN HOOKS, 1/4" EA A* CHAIN HOOKS, 5/16" EA A* BELT, SANDER 120 GRIT EA 3" X 24" A* BELT, SANDER 120
HAND TOOLS A*0000080001 ROPE, NYLON 1/4" FT A*0000080002 ROPE, MANILLA 1/2" FT A*0000080003 DOWELL RODS 1/4" EA A*0000080004 DOWELL RODS 3/8" EA A*0000080005 DOWELL RODS 1/2" EA A*0000080006 DOWELL RODS
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More informationD SERIES SKID STEER LOADER, COMPACT TRACK LOADER & MULTI TERRAIN LOADER PARTS REFERENCE GUIDE
D SERIES SKID STEER, COMPACT TRACK & MULTI TERRAIN PARTS REFERENCE GUIDE » PROTECT YOUR INVESTMENT WITH GENUINE CAT PARTS GREASES Thank you for selecting the Cat D Series Skid Steer, Compact Track or Multi
More informationSpare parts list. Petrol breakers CP Drill.
Spare parts list Petrol breakers CP Drill www.cp.com CP Drill Spare parts list General information This spare parts list applies to the following: Part number Description 8318 0900 40 CP Drill 22x108 mm
More informationD Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.
D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece
More informationRAILWAY MAINTENANCE OF WAY TOOLS PRODUCT CATALOG
2015-2016 RAILWAY MAINTENANCE OF WAY TOOLS PRODUCT CATALOG www.stanleyhydraulics.com www.stanleyhydraulic.com COMPANY OVERVIEW GREAT BRAND GREAT TOOLS Stanley Hydraulic Tools has a proud tradition of being
More information1.1/2" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer) 1" - Air Impact Wrench (Twin Hammer)
Impact Wrenches 13000-2 Anvil Length Bolt Capacity Overall Length Torque (5s) 12000-2 8" 3,700rpm 2,000 ft-lbs 10kg 2" 3,700rpm 2,000 ft-lbs 7.7kg 3/4" - Air Impact Wrench (Single Hammer) 1266 2" 3,700rpm
More information