RECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2
|
|
- Audra Bennett
- 5 years ago
- Views:
Transcription
1 RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS
2 C100 Hexagon Wrench Set ( C100) ( Wrench 5 ) ( C110) ( Wrench 6 ) ( C120) ( Wrench 8 ) ( C130) ( Wrench 10 ) ( C140) ( Wrench 12 ) Straight Hexagon ( C100) ( Wrench 10 ) Straight Hexagon ( C110) ( Wrench 12 ) Straight Hexagon ( C120) ( Wrench 14 ) Straight Hexagon ( C130) ( Wrench 17 ) Straight Hexagon ( C140) ( Wrench 19 ) Straight Hexagon ( C150) ( Wrench 21 ) Straight Hexagon ( C160) ( Wrench 24 ) C110 Wrench Set ( C100) ( Wrench 5 ) ( C110) ( ) Wrench 6 2
3 ( C120) ( Wrench 8 ) ( C130) ( Wrench 10 ) ( C140) ( Wrench 12 ) C mm Socket Wrench for 12 Pointed Head C560 Socket Wrench 26 mm C570 Socket Wrench 27 mm C580 Socket Wrench 29 mm C590 Socket Wrench 30 mm C600 Socket Wrench 32 mm C100 Socket Wrench 46 mm C110 Socket Wrench 50 mm C200 Spark Plug Wrench 20.8 mm C210 Spark Plug Wrench 16 mm C220 Spark Plug Wrench 14 mm Width Across Flat 14 mm C400 Socket Wrench 3
4 C100 Universal Socket Wrench 8 mm C110 Universal Socket Wrench 10 mm C120 Universal Socket Wrench 12 mm C100 8 mm C mm C mm C mm C mm C mm C mm C mm C mm 4
5 C120 Socket Wrench Set ( C100) Socket T mm For removing and installing screw or bolt ( C110) ( C120) ( C130) Socket T25 Socket T30 Socket T mm 5.5 mm 6.6 mm T10 = 2.7 mm (0.106 in.) T20 = 3.8 mm (0.150 in.) T25 = 4.4 mm (0.173 in.) T30 = 5.5 mm (0.217 in.) T40 = 6.6 mm (0.260 in.) T45 = 7.8 mm (0.307 in.) T50 = 8.8 mm (0.347 in.) ( C140) Socket T mm ( C150) Socket T mm C300 Long Socket T mm C310 Long Socket T mm C200 Driver T mm C210 Driver T mm C220 Driver T mm C230 Driver T mm C100 Socket for Tamper Resistant T30 H 5.5 mm C110 Socket for Tamper Resistant T50 H 8.8 mm C120 Socket for Tamper Resistant T55 H 9.9 mm 5
6 C500 Socket E C510 Socket E C520 Socket E C530 Socket E C540 Socket E10 E10 = 9.4 mm (0.370 in.) C550 Socket E14 E14 = 12.8 mm (0.504 in.) C500 Long Socket Hexagon C510 Long Socket Hexagon C520 Long Socket Hexagon C300 Bi-hexagon Wrench M C310 Bi-hexagon Wrench M C400 Hexagon Bar Wrench Set 6
7 C100 Union Nut Wrench 10 mm C110 Union Nut Wrench 12 mm C120 Union Nut Wrench 14 mm C130 Union Nut Wrench 17 mm C140 Union Nut Wrench 19 mm C200 Ball Joint Lock Nut Wrench 17 mm C210 Ball Joint Lock Nut Wrench 19 mm C220 Ball Joint Lock Nut Wrench 22 mm C200 Handle L-type 19.0sq Small Torque Wrench For measuring preload C190 Open End Wrench 12 x 14 mm C100 Combination Wrench 14 mm For adjusting the drive belt of vane pump C150 Short Screwdriver C560 Micro Driver C100 Socket Driver 5.5 mm C110 Socket Driver 7 mm 7
8 C400 Nipper C500 Water Pump Pliers Air drill ( ) (Chuck Set) ( ) (Handle) Air Duster Air Powered Ratchet ( ) (Air Wrench Oil) Ratchet Shank ( ) ( Subassembly ) Ratchet Shank ( ) ( Repair Kit ) Head Housing ( ) ( Assembly ) ( ) (Gear Repair Kit) ( ) (Motor Assembly) Throttle Valve ( ) ( Repair Kit ) Throttle Lever ( ) ( Repair Kit ) ( ) (Silencer Ring) 8
9 ( ) (Inlet Union) Air Riveter Service Bulletin No.B-4036 ( ) (Dust Cap) ( ) (Nose Piece No.1) ( ) (Nose Piece No.2) ( ) (Nose Piece No.3) Nose Piece No.4 Optional tool for Recommended Tool No C110 Plastic Faced Hammer 420g C300 Chisel C400 Pin Punch Pin diameter 3 mm (0.12 in.) C410 Pin Punch Pin diameter 5 mm (0.20 in.) C500 Center Punch Revet Cutter C100 Clip Remover 172 mm Length C110 Clip Remover mm Length C200 Moulding Remover 9
10 C300 Moulding Remover Set ( C310) (Moulding Remover A) ( C320) (Moulding Remover B) ( C330) (Moulding Remover C) ( C340) (Moulding Remover D) C100 Vise Pliers C100 Tape Measure 2 m C110 Tape Measure 3 m C200 Calipers 150 mm C210 Calipers 300 mm TOYOTA Electrical Tester TOYOTA Electrical ( ) ( Tester ) ( ) (IC Clip) ( ) (Clip) ( ) (Pin) ( ) (Test Lead) 10
11 ( ) (Base Lead) ( ) (Test Lead Set) ( ) (AC/DC 400A Probe) ( ) (Tester Case) ( ) (Probe Case) A fuse A fuse Engine Sling Device For suspending engine ( ) (Hook A) ( ) (Hook B) Transmission Repair Stand For setting the transmission in a vise (W & N series transmission only) C100 Oil Pan Seal Cutter Hog Ring Pliers Engine Adjust Kit ( C300) (Oil Stone) ( ) (Wrench 7 x 8 mm) 11
12 Spark Plug Gap ( C100) ( Gauge ) ( C200) (Thickness Gauge) V Belt Remover For removing drive belt Belt Tension Gauge Belt Tension Gauge Cable Caburetor Driver Set ( ) (Case) ( ) (No.1 Driver) W = 4.0 mm (0.157 in.) ( ) (No.2 Driver) W = 6.0 mm (0.236 in.) ( ) (No.3 Driver) W = 7.5 mm (0.295 in.) ( ) (No.4 Driver) W = 10.0 mm (0.394 in.) Caburetor Driver ( ) ( Handle ) Caburetor Adjust ( ) ( Wrench ) Expander Set For removing and installing snap ring ( ) (No.1 Claw) Set of 2 ( ) (No.2 Claw) Set of 2 12
13 ( ) (No.3 Claw) Set of 2 ( ) (No.4 Claw) Set of 2 ( ) (No.5 Claw) Set of 2 ( ) (No.6 Claw) Set of 2 ( ) (No.7 Claw) Set of Snap Ring No.1 Expander For removing and installing snap ring (Snap Ring Pliers) ( ) (Claw Set) Set of Snap Ring Pliers Deep Socket Deep Socket 41 13
14 14
RECOMMENDED TOOLS AND CHECKERS
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 : An impact wrench can be used with tools with this mark. As tools without this mark are meant to be operated manually,
More information1NZ-FE ENGINE CONTROL SYSTEM
PREPARATION 1NZ-FE ENGINE CONTROL SYSTEM 1NZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench 2 PREPARATION 1NZ-FE ENGINE CONTROL SYSTEM RECOMMENDED TOOLS 09082-00040 TOYOTA
More information2AZ-FE ENGINE CONTROL SYSTEM
PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM 2AZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench Engine coolant temperature sensor 2 PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM RECOMMENDED
More informationENGINE MECHANICAL PREPARATION SST mm Socket Wrench for 12 Pointed Head Union Nut Wrench 12mm PARTIAL ENGINE ASSY(1ZZ FE)
SST 025 021E001 0901138121 12 mm Socket Wrench for 12 Pointed Head CYLINDER BLOCK(1ZZFE) 0902338200 Union Nut Wrench 12mm 0903200100 Oil Pan Seal Cutter 0920101055 Valve Guide Bushing Remover & Replacer
More information1GR-FE ENGINE CONTROL SYSTEM
PREPARATION 1GR-FE ENGINE CONTROL SYSTEM 1GR-FE ENGINE CONTROL SYSTEM PREPARATION RECOMMENDED TOOLS 1 09040-00011 Hexagon Wrench Set (09043-20080) Socket Hexagon Wrench 8 (09043-20100) Socket Hexagon Wrench
More informationDIAGNOSTICS PREPARATION SST. Recomended Tools Oil Pressure Switch Socket SFI SYSTEM Diagnosis Check Wire No.
DIAGNOSTICS SST DIAGNOSTICS 021 021CL01 0981630010 Oil Pressure Switch Socket SFI SYSTEM 0984318040 Diagnosis Check Wire No.2 SFI SYSTEM SUPPLEMENTAL SYSTEM RESTRAINT Recomended Tools 0908200040 TOYOTA
More informationPOWER STEERING PUMP (3VZ FE) POWER STEERING PUMP REMOVAL AND INSTALLATION Remove and install the parts as shown.
STEERING SR41 PUMP (3VZFE) PUMP REMOVAL AND INSTALLATION Remove and install the parts as shown. SR42 STEERING (MAIN POINTS OF REMOVAL AND INSTALLATION) 1. REMOVE PRESSURE TUBES Using SST, remove the pressure
More information4. SEPARATE SPEED SENSOR FRONT LH (a) Remove the bolt and disconnect the speed sensor wire and flexible hose from the shock absorber assy.
OVERHAUL Refer to components: See page 304 Use the same procedures for the RH side and LH side. The procedures listed below are for the LH side. 1. DRAIN TRANSAXLE OIL (a) Using a #10 socket hexagon wrench,
More informationFRONT DRIVE SHAFT COMPONENTS DS 1 DRIVE SHAFT FRONT DRIVE SHAFT FRONT DRIVE SHAFT HOLE SNAP RING. w/o ABS: AUTOMATIC TRANSMISSION CASE PROTECTOR
FRONT DRIVE SHAFT DRIVE LINE SHAFT COMPONENTS 1 FRONT DRIVE SHAFT HOLE SNAP RING 23 (235, 17) FRONT DRIVE SHAFT ASSEMBLY RH w/o ABS: AUTOMATIC TRANSMISSION CASE PROTECTOR FRONT DRIVE SHAFT ASSEMBLY LH
More informationGeneral Maintenance Tool Kit (GMTK) Drawer layout
26 2 8 6 5 32 31 35 25 11 9 33 7 24 23 22 28 21 20 27 19 18 17 34 16 15 10 14 13 12 4 3 30 1 General Maintenance Tool Kit (GMTK) Drawer layout COMP # DESCRIPTION BRAND PART NO. WARRANTY 1-3/16 Drawer,
More informationSONIC GM Express Service Tool Kit*
SONIC GM Express Service Tool Kit* Drawer 1 E107901 Empty Foam for the 26" SFS 79pcs 1/4" Combination Socket Set & Screwdrivers 1 ea 1310 Screwdriver, PH.0 1 ea 1311 Screwdriver, PH.1 1 ea 1312 Screwdriver,
More informationSpring Special. 1 October - 30 November 2012 GLFS0012 R R GLFS0008. Micro - Tec
Spring Special *All Prices Incl VAT* E&OE 1 October - 30 November 2012 MSS9600 61pc Tool Set R2 502.00 1/2 Socket Sizes (12 Point): 8 10 11 12 13 14 15 16 17 18 19 20 21 22 24 27 30 32 1/2 Reversible Ratchet
More information26/01/2017 3GR-FSE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY; 2006 MY GS300 [01/ ]
Last Modified: 8-24-2016 6.6 A Doc ID: RM000000T4X000X Model Year Start: 2006 Model: GS300 Prod Date Range: [01/2005 - ] Title: 3GR-FSE ENGINE MECHANICAL: ENGINE UNIT: DISASSEMBLY; 2006 MY GS300 [01/2005
More informationREASSEMBLY MT INSTALL 1ST AND REVERSE SHIFT ARM (a) Install the shift arm and shift arm pivot onto the interlock bracket.
30 RA61F MANUAL TRANSMISSION MANUAL TRANSMISSION UNIT REASSEMBLY 1. INSTALL 1ST AND REVERSE SHIFT ARM (a) Install the shift arm and shift arm pivot onto the interlock bracket. D033725 (b) Install a new
More informationUOW Series Repair Manual UOW-11 & UOW-T60 Series
UOW Series Repair Manual UOW-11 & UOW-T60 Series 100000 SE Pine St., Portland, OR 97216 800-852-1368 503-254-6600 www.aimco-global.com Contents Page 1. Tools Needed for Repair 2 2. Disassembly and Reassembly
More informationA* CHAIN HOOKS, 1/4" EA A* CHAIN HOOKS, 5/16" EA A* BELT, SANDER 120 GRIT EA 3" X 24" A* BELT, SANDER 120
HAND TOOLS A*0000080001 ROPE, NYLON 1/4" FT A*0000080002 ROPE, MANILLA 1/2" FT A*0000080003 DOWELL RODS 1/4" EA A*0000080004 DOWELL RODS 3/8" EA A*0000080005 DOWELL RODS 1/2" EA A*0000080006 DOWELL RODS
More informationALLTRADE & POWERBUILT NEW PRODUCT (SOME SHELF LIFT ITEMS)
AT-020014 IMPACT WRENCH 19.2V KAWASAKI 1\10 $59.00 11 AT-040013FC PLIERS SET 2PC X-DUAL HEAD (DISPLAY) 4-8\10 $7.95 253 AT-150017 UTILITY KNIFE, FOLDING, QUICK RELEASE (DISPLAY) 20- $2.95 99 AT-150030
More informationStep 4: Remove rear fuel line banjo bolt. Be sure to catch copper washer between pump and front of the rear fuel line.
Denny T AFC Delete Installation Instructions Tools Needed: 10mm Wrench, 13mm Wrench, 12mm Wrench, 14mm Wrench, 17mm Wrench 5mm Ball End Allen Wrench, 8mm Allen Wrench Needle Nose Pliers, Hammer, Small
More informationCOMPONENTS (KOYO Type)
STEERING SR55 COMPONENTS (KOYO Type) DISASSEMBLY OF STEERING GEAR HOUSING 1. CLAMP GEAR HOUSING IN VISE Using SST, secure the steering gear in a vise. SST 0961200012 2. REMOVE RIGHT AND LEFT TURN PRESSURE
More information1 JULY ~ 30 AUGUST 2013 Micro - Tec
*All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM
More informationREAR DRIVE SHAFT (3S GTE ENGINE)
SA52 REAR DRIVE SHAFT (3SGTE ENGINE) COMPONENTS SA53 NOTICE: The axle bearing could be damaged if it is subjected to the vehicle weight, such as when moving the vehicle with the drive shaft removed. Therefore,
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours
More information2004 Lexus LS430. Submodel: Engine Type: V8 Liters: 4.3 Fuel Delivery: FI Fuel: GAS
2004 Lexus LS430 Submodel: Engine Type: V8 Liters: 4.3 Fuel Delivery: FI Fuel: GAS OVERHAUL If the airbag connector is disconnected with the ignition switch in the ON position, DTCs will be recorded. When
More informationENGINE MECHANICAL PREPARATION SST mm Socket Wrench for 12 Pointed Head
SST 027 023HH01 0901138121 12 mm Socket Wrench for 12 Pointed Head CYLINDER BLOCK ASSY(2AZFE) PARTIAL ENGINE ASSY(3MZFE) (3MZFE) NO.2(3MZFE) CYLINDER BLOCK ASSY(3MZFE) 0903200100 Oil Pan Seal Cutter PARTIAL
More information2005 Toyota RAV AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul
2001-05 AUTOMATIC TRANSMISSIONS U240E & U241E Overhaul APPLICATION CAUTION: Flush oil cooler and oil cooler lines prior to transaxle installation. Oil cooling system contamination may cause premature transaxle
More informationMISCELLANEOUS WOOD CHISEL
MISCELLANEOUS WOOD CHISEL In hanger WOOD CHISEL SET - Grounded and lacquered blade - Hardened blade - Ergonomic bimaterial handle 74 0 3,0 74 3,8 744 4 3,9 74 3,99 748 4, 7 0 4,3 7 4,34 7 4,43 pieces -
More informationTechnical Service BULLETIN
Technical Service BULLETIN September 16, 2002 Title: Models: 01 02 Sequoia BR005-02 BRAKES TSB REVISION NOTICE: March 5, 2004: A torque specification on page 9, step 24, was changed. September 8, 2003:
More information10/31/2018 R.M. 2005::Drive Shaft / Propeller Shaft: Front Drive Shaft: Overhaul (SCION xb) 2005 Scion XB MotoLogic
2005 XB OVERHAUL Use the same procedures for the RH side and LH side. The procedures listed below are for the LH side. 1. DRAIN MANUAL TRANSAXLE OIL (M/T TRANSAXLE) Torque: 39 N m (398 kgf cm, 29 ft lbf)
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationREMOVE FRONT WHEEL RH
518 OVERHAUL POWER STEERING Do not overtighten when using a vise. When installing, coat the parts indicated by the arrows with power steering fluid (see page 517 ). 1. REMOVE FRONT WHEEL RH 2. DRAIN POWER
More informationSR 55 POWER STEERING GEAR. POWER STEERING GEAR REMOVAL AND INSTALLATION Remove and install the parts, as shown.
STEERING SR55 GEAR GEAR REMOVAL AND INSTALLATION Remove and install the parts, as shown. SR56 STEERING MAIN POINT OF REMOVAL AND INSTALLATION 1. REMOVE OIL RESERVOIR 2. REMOVE AIR CLEANER ASSEMBLY 3. DISCONNECT
More informationSR Performance Twin 62mm Throttle Body for GT
Required Tools: SR Performance Twin 62mm Throttle Body for 2005-2010 GT Flat-head screwdriver Ratchet Small extension 10mm socket 8mm socket T20 Torx bit Needle nose pliers 5mm allen wrench Recommended
More informationLISTA PRETURI SCULE BGS
LISTA PRETURI SCULE BGS COD PRODUS Description Pret in LEI cu TVA 9 BGS Shopping Bag 13,74 11 Miniature Aluminum Jack, 90 kgs 345,33 12 BGS T-Shirt, size S 96,18 13 BGS T-Shirt, size M 96,18 14 BGS T-Shirt,
More informationPOWER STEERING SYSTEM
SYSTEM 511 SYSTEM PRECAUTION 5105K01 1. HANDLING PRECAUTIONS ON STEERING SYSTEM (a) Care must be taken to when replacing parts. Incorrect replacement could affect the performance of the steering system
More informationSpare parts list. Petrol breakers CP Drill.
Spare parts list Petrol breakers CP Drill www.cp.com CP Drill Spare parts list General information This spare parts list applies to the following: Part number Description 8318 0900 40 CP Drill 22x108 mm
More informationONLY use MLR, Ast, or MST
2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 TRANSPORTATION CLUSTER AUTO SERVICE TECHNOLOGY EQUIPMENT LIST ONLY use MLR, Ast, or MST Estimated Cost Each Estimated Total Cost Automotive
More informationAutomotive Service Tools
Automotive Service Tools Part 1 by: Ed Nutter The following document shows the tools that I use to keep my vehicle on the road. You don't have to buy all these tools at once I've been collecting them for
More informationMaster Sets with Foam Tray Organizers
Master Sets with Foam Tray Organizers D096005-FT1T 1/2" Drive SAE Impact Sockets 6 Point Standard Sockets: 3/8" - 1-1/2" - 6 Point Deep Sockets: 3/8" - 1-1/2" Foam Tray Organizer: 21-3/4" (w) x 15" (d)
More informationFeatures and Specifications for Impact Wrenches
Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN
More information5. SEPARATE STEERING INTERMEDIATE SHAFT ASSY (a) Fix the steering wheel with the seat belt. Release the 3 springs and separate the dust cover.
5119 OVERHAUL When installing, coat the parts indicated by the arrows with power steering fluid or molybdenum disulfide lithium base grease (See page 5116). 1. INSPECT CENTER FRONT WHEEL 510DA02 2. REMOVE
More informationBR 25 BRAKE HYDRAULIC BRAKE BOOSTER REMOVAL
AKE HYDRAULIC AKE BOOSTER 25 REMOVAL When installing, coat the parts indicated by arrows with lithium soap base glycol grease (See page - 13). As high pressure is applied to the brake actuator tube No.
More informationHandle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Handle: 6" Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More information1/2 Air Impact Wrench P/N IR 2235TiMAX-2 With 2 Anvil, Weighs Only 4.9 lbs ft.-lbs. torque. 3/4 Super Duty P/N IR 261
37 Order NLINE www.midwestwheel.com CATALOG NUMBER Ingersoll Rand Air Tools & Accessories 3/8 Air Impactool IR 2115TiMAX The best power-to-weight ratio in its class 300 ft.-lbs. torque Enhanced power settings
More informationImpulse Buy Products. Impulse Buy Products. To order call: Fax:
1 Countertop Impulse Merchandisers 2-in-1 COB Work Flashlight PART# DESCRIPTION PACK 55080 Features hanging hook and high power magnetic base. Swivel head for directional use. Pull out head to reveal flood
More information1. Seat 6. Side cover 11. Fuel pump retainer. 4. Mud guard 9. Fuel pump gasket : Do not reuse.
LT-A450** K8 ~ L0 LT-A500** K9 ~ L1 LT-A750** K8 ~ L1 Fuel Tank Removal, Inspection and Installation Procedure Necessary Tools Ratchet handle (9.5 sq) Socket wrench (10 mm, 9.5 sq) Socket wrench (12 mm,
More informationPower Steering Pump REMOVAL AND INSTALLATION OF POWER STEERING PUMP
STEERING SR45 Power Steering Pump REMOVAL AND INSTALLATION OF POWER STEERING PUMP Remove and install the parts as shown. SR46 STEERING (MAIN POINTS OF REMOVAL AND INSTALLATION) 1. (RN Series/4WD) DISCONNECT
More information2004 Toyota Truck Tundra 4WD V8 4.7L (2UZ FE)
2004 Toyota Truck Tundra 4WD V8 4.7L (2UZ FE) Vehicle» Steering and Suspension» Steering» Steering Gear» Service and Repair» Disassembly and Assembly Part 1 Of 3 Part 2 Of 3 http://alldatapro.com/alldata/pro~v432223842~c41100~r0~od~n/0/101825161/103142888/105946035/110859872/34853741/34864218/34864219/34864308/
More informationENGINE CONTROL SYSTEM
ENGINE CONTROL SYSTEM Recommended Tools ENGINE CONTROL SYSTEM 021 023FY01 0907020010 Moulding Remover ECM(1NZFXE) 0908200040 TOYOTA Electrical Tester SFI SYSTEM(1NZFXE) (0908300150) Test Lead Set SFI SYSTEM(1NZFXE)
More informationMaintenance Information
Form 16573321 Edition 1 July 2004 Air Grinder Series 61H Maintenance Information Save These Instructions Always wear eye protection when operating or performing maintenance on this tool. Always turn off
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Automotive Service Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s)
More informationFRONT & 4 REAR GM WD LOWERING KIT
92725200 88-98 2 FRONT & 4 REAR GM 1500 2WD LOWERING KIT Thank you for choosing Rough Country for all your suspension needs. Rough Country recommends a certified technician install this system. In addition
More informationMaintenance Information
16584062 Edition 3 December 2013 High Torque Reversible Angle Screwdrivers and Angle Wrenches QA1L High Torque Series Maintenance Information Save These Instructions Product Safety Information WARNING
More informationDisassembly Instructions hp. Dynafile II Models: 40320, 40321, 40324, 40326, 40330, 40335
Disassembly Instructions - 0.5 hp. Dynafile II Models: 40320, 40321, 40324, 40326, 40330, 40335 Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply
More informationDisassembly Instructions hp Dynafile
Disassembly Instructions - 0.5 hp. 14000 Dynafile Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to dissipate the
More informationBR 43. BRAKE HYDRAULIC BRAKE BOOSTER (w/ VSC) REMOVAL
AKE HYDRAULIC AKE BOOSTER (w/ VSC) 43 REMOVAL Before starting the work, make sure that the ignition switch is OFF and depress the brake pedal more than 20 times. As high pressure is applied to the brake
More informationTOOLS TO FIRE YOUR EMOTION! V4951 Ratcheting open-end wrench set. V Socket set. Closed solid steel ratchet V4944
TOOLS TO FIRE YOUR EMOTION! 2017-05-01 2017-08-1 V4951 Ratcheting open-end wrench set Hot Innovation! Closed solid steel ratchet V241 7 8 Socket set Hot Price! V4944 V494 HOT17-1/EN/NO/9 7 Valid until:
More informationCHAIN SAWS G561AVS G621AVS
2626-93121 CHAIN SAWS G561AVS G621AVS APPLICABLE SERIAL NUMBERS: OCTOBER 1998 G561AVS 814608 and up G621AVS 820954 and up Fig.1 1 Fig.2 2 Fig.1 1 1 2616-12112 2618-12115 CYLINDER 1 K4 2 3356-12141 GROMMET
More informationPull out clutch E snap ring and withdraw complete clutch pack of clutch E. 6 HP 26 ZF Getriebe GmbH Saarbrücken CD
Press down cup spring in the mandrel press with assembly bracket 5x46 002 566 and remove snap ring with suitable pliers. Take out planet carrier and cup spring. Take the O-ring seal off the planet carrier.
More informationPower Steering Rack Leak from Right Side: Overhaul Procedure
T-SB-0030-14 April 17, 2014 Power Steering Rack Leak from Right Side: Overhaul Procedure Service Category Steering Section Steering Gear/Linkage Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION
More informationTitle: FRONT BRAKE VIBRATION Models: Tundra. Front Brake Caliper & Rotor Replacement (2WD, Both Sides)
Technical Service BULLETIN September 16, 2002 Title: FRONT BRAKE VIBRATION Models: 00-03 Tundra BR004-02 BRAKES TSB REVISION NOTICE: S March 5, 2004: A torque speification on page 10, step 24, was changed.
More informationHandle: 20" Chain: 25"
Handle: 6" JTC-1147 6" CHAIN WRENCH Chain: 18" (400mm) Handle: 20" Chain: 25" JTC-1149 20" CHAIN WRENCH JTC-1150 12" STRAP WRENCH Handle: 12" Strap length: 36" JTC-1355 EUROPEAN DOOR HINGE / HANDLE KIT
More informationSST Storage System Master Index
SST Storage System Master Index JANUARY 2018 To Order Special Service Tools Call Bosch/OTC at 1-800-933-8335 Table of Contents Page # Part Number References......................................... 2-8
More informationDrawing A Crankcase, Cylinder
Drawing A Crankcase, Cylinder 1 Drawing A Crankcase, Cylinder Reference Item number Qty Description 1 4140 021 0300 1 Crankcase 2 9639 003 1230 2 Oil seal12x22x7 3 9503 003 0242 2 Grooved ball bearing
More informationGearbox Servicing
Safety Precautions : Be certain to clamp or securely support the gearbox and sub-assemblies to prevent injuries to hands and feet due to inadvertent dropping or falling over. Always wear safety glasses
More informationPP-80 PP1AG-01 EQUIPMENT. Voltmeter Ammeter Ohmmeter Test lead. Torque wrench 2004 LAND CRUISER (RM1071U)
PP80 AIR CONDITIONING EQUIPMENT PP1AG01 Voltmeter Ammeter Ohmmeter Test lead Thermometer Sernsor Torque wrench Dial indicator Magnetic clutch Plastic hammer Magnetic clutch 139 AIR CONDITIONING PP81 LUBRICANT
More informationMaintenance Information
16573321 Edition 3 February 2014 Air Grinder Series 61H Maintenance Information Save These Instructions Product Safety Information WARNING Failure to observe the following warnings, and to avoid these
More informationREPLACEMENT 1. REMOVE FRONT WHEEL
3028 REPLACEMENT 1. REMOVE FRONT WHEEL 300HC03 2. REMOVE FRONT DISC BRAKE CALIPER ASSY LH (a) Remove the bolt and separate the brake tube bracket from the steering knuckle. (b) Using, disconnect the brake
More informationNew Product Guide. See the new Sykes-Pickavant catalogue for further details! Service & Diagnostics. Engine CAT054
Product Catalogue See the new Sykes-Pickavant catalogue for further details! CAT054 New Product Guide Engine 314050 Petrol Compression Tester Set - for Deep Seated Plug Ports Page 11 314270 Page 13 314295
More informationAUTOMATIC TRANSAXLE AUTOMATIC TRANSAXLE SYSTEM... COMPONENT PARTS...
SYSTEM....... COMPONENT PARTS.................... OIL PUMP.............................. DIRECT CLUTCH........................ FORWARD CLUTCH..................... SECOND BRAKE........................ UNDERDRIVE
More informationRear Door: Service and Repair REAR DOOR
2007 Toyota Matrix L4-1.8L (1ZZ-FE) Copyright 2013, ALLDATA 10.52 Page 1 Rear Door: Service and Repair REAR DOOR Rear Door 2007 Toyota Matrix L4-1.8L (1ZZ-FE) Copyright 2013, ALLDATA 10.52 Page 2 ISASSEMBLY
More informationSUSPENSION - FRONT Toyota Celica DESCRIPTION ADJUSTMENTS & INSPECTION WHEEL ALIGNMENT SPECIFICATIONS & PROCEDURES WHEEL BEARING
SUSPENSION - FRONT 1988 Toyota Celica FRONT SUSPENSION Toyota DESCRIPTION Vehicles are equipped with front wheel drive and independent MacPherson strut front suspension. Suspension consists of vertically
More informationTechnical Service BULLETIN
Technical Service BULLETIN September 12, 2002 Title: Models: 00 05 Tundra BR004-02 BRAKES TSB REVISION NOTICE: April 4, 2005: Applicable Vehicles has been updated to include 2003 2005 model years. The
More informationSST Storage System Master Index
SST Storage System Master Index OCTOBER 2017 To Order Special Service Tools Call Bosch/OTC at 1-800-933-8335 Table of Contents Page # Part Number References......................................... 2-8
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS 2351 2 DROP SPINDLE 2WD ONLY >>> CANNOT USE STOCK WHEELS you MUST use 20 wheels or larger see instructions on pg. 3
More informationPrinted from MediaCat
Illustration A Crankcase, Crankshaft Illustration A Crankcase, Crankshaft Ref.Nr. Item code Quantity Description 1 1117 020 2106 1 Crankcase 2-9 2 9022 341 1050 4 Spline screw IS-M5x25 3 0000 988 5211
More informationAIR CONTROL VALVE INSPECTION 1. TURN AIR CONDITIONING SWITCH OFF
SR8 AIR CONTROL VALVE Vacuum Hose F04811 AIR CONTROL VALVE INSPECTION 1. TURN AIR CONDITIONING SWITCH OFF SR0LZ06 2. CHECK IDLEUP (a) Start the engine and run it at idle. (b) Fully turn the steering wheel.
More informationDrawing A Cylinder, Engine pan
Drawing A Cylinder, Engine pan 1 Drawing A Cylinder, Engine pan Reference Item number Qty Description 1 4180 020 1207 1 Cylinder with piston Ø 38 mm (33.2008) 2-9, 16 2 4180 025 2002 2 Valve 3 4180 025
More informationREMOVAL TF REMOVE TRANSFER INDICATOR SWITCH (a) Remove the switches and gaskets. HINT: Indicator switch:
20 NO. 1 NO. 2 F043499 REMOVAL 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag
More informationMANUAL FOR THE NM100 ADJUSTABLE SHORT SHIFTER
MANUAL FOR THE NM100 ADJUSTABLE SHORT SHIFTER P.O. BOX 313 ~ ODESSA, FL 33556 ~ 1-844-NUM-RACE Tools Needed T20 Torx Driver T27 Torx Driver Needle Nose Pliers ¼ Ratchet with 10MM Socket 3MM Allen Wrench
More information1. General Description
1. General Description A: SPECIFICATION 1. MANUAL TRANSMISSION AND FRONT DIFFERENTIAL Type Transmission gear ratio Front reduction gear Rear reduction gear Front differential Center differential Final
More informationUsed for installation and dismantling designs such as pipes of almost any diameter. Handle: 20" Chain: 25"
JTC-1147 6" CHAIN WRENCH Used for installation and dismantling designs such as pipes of almost any diameter. Handle: 6" Chain: 18" (400mm) JTC-1149 20" CHAIN WRENCH Used for installation and dismantling
More informationPrinted from MediaCat
Illustration A Crankcase Illustration A Crankcase Ref.Nr. Item code Quantity Description 1 1119 020 2118 1 Crankcase (1,3,5) 2-11 1 1119 020 2109 1 Crankcase (6,8,9) 2-11 1 1119 020 2119 1 Crankcase (2,4)
More informationSST Storage System Master Index
SST Storage System Master Index OCTOBER 2017 To Order Special Service Tools Call Bosch/OTC at 1-800-933-8335 Table of Contents Page # Part Number References......................................... 2-8
More informationDisassembly Instructions hp. Mini-Dynafile II
Disassembly Instructions - 0.4 hp. Mini-Dynafile II Important: Use these instructions along with the tool parts page or manual. Notice: Shut off the air supply and depress throttle lever to deplete the
More information25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613) Fax:(613)
25 RAILWAY STREET KINGSTON, ONTARIO K7K 2L7 (613)546-6663 1-800-267-0920 Fax:(613)542-4451 EMAIL: info@levacsupply.com 330 LAURIER BLVD. P.O. BOX 460 BROCKVILLE, ONTARIO K6V 5V6 (613)345-1991 1-877-270-0317
More informationFerax newsletter
Ferax newsletter 2010-07 1 COMPRESSED AIR Quick couplings Quick couplings with hose connection Quick couplings with male thread Quick couplings with female thread Insert nipple with hose connection Insert
More information#1 SOEX12 WRENCH COMBINATION FLANK DRIVE PLUS 3/8" 12 POINT 1 Snap-On Industrial $24.38 SNAP-ON 2 WEEKS ARO
BID ON: AUTOMOTIVE TOOLS - VOCATIONAL DEPT. BID NO: 17-32 OPENED: MAY 30, 2017 @2:00PM SAMPLE OF HEAVY USE ITEMS ALL ITEMS LISTED ARE SNAP-ON OR APPROVED EQUAL ITEM MODEL # DESCRIPTION QTY. BIDDER UNIT
More informationREAR BUMPER COMPONENTS. Luggage Compartment. Trim Cover Assy RH. Rope Hook Assy. Deck Trim Side Board LH. Deck Trim Side Board RH.
767 COMPONENTS 7615701 Deck Trim Side Board LH Deck Trim Side Board RH Luggage Compartment Trim Cover Assy RH Luggage Compartment Floor Mat Luggage Compartment Trim Cover Assy LH Rear Floor Finish Plate
More information1989 Jeep Cherokee. STEERING COLUMN' '1989 STEERING Jeep Steering Columns STEERING COLUMN STEERING Jeep Steering Columns
STEERING COLUMN 1989 STEERING Jeep Steering Columns DESCRIPTION All models use collapsible steering columns. All columns have integral ignition switch and locking device. Optional tilt wheel is available
More informationTSB # 52 Ballast Pumps
Technical Service Bulletin # 52 Ballast Pumps September 14, 2002, April 10, 2003 The Jabsco pump will need to be replaced with Installation of Rule 1100 gallon pumps 2000+2001 Models of Epic X22 and any
More informationQuick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm Collet size: 6mm (1/4")
JTC-3101 M INI AIR DIE GRINDER JTC-3321 SPOT WELD CUTTER KIT JTC-3401 1/2" HEAVY DUTY AIR M INI IM PACT WRENCH Free speed: 25000 rpm Quick drills out spot weld on fenders, doors, etc. Free speed: 11000rpm
More informationFRONT AXLE AND SUSPENSION FA 1
FRONT AXLE AND SUSPENSION FA1 FRONT AXLE AND SUSPENSION FA2 FRONT AXLE AND SUSPENSION Troubleshooting TROUBLESHOOTING Problem Possible cause Remedy Page Wanders/pulls Tires worn or improperly inflated
More informationOCCUPATIONAL TOOLS AND EQUIPMENT LIST
OCCUPATIONAL TOOLS AND EQUIPMENT LIST Motor Vehicle Body Repairer (Metal and Paint) Government of Newfoundland Labrador Department of Advanced Education and Skills December 2011 Preface This document is
More informationrev 5_ EA4300F40B (Makita Teal) EA4300FR (Makita Red) PS-421 (Dolmar Red)
(Makita Teal) (Makita Red) (Dolmar Red) 1 Tank, Handle 1 79 10 11 9 19 8 13 12 14 20 18 3 7 6 5 2 4 18 19 20 16 24 18 19 17 22 22 23 18 21 19 20 21 23 2 1 Tank, Handle 1 1 195-114-650 TANK CPL. BLUE 1
More informationTOYOTA COROLLA HATCHBACK REAR SPOILER Preparation
Preparation Part Number: PT29A-12195-XX Kit Contents 1 1 Rear Spoiler 2 2 Hardware Bag Hardware Bag Contents 1 2 M6 Assembly Nuts 2 2 Grommet Inserts 3 1 Hole Plug Additional Items Required For Installation
More information). 1. REMOVE FR WIPER ARM RH
5120 OVERHAUL When installing, apply power steering fluid or molybdenum disulfide lithium base grease to the parts indicated by arrows (See page 5117). 1. REMOVE FR WIPER ARM RH (See page 666) 2. REMOVE
More informationPARTS LIST FOR NO. 1 SERIES 1AM ANGLE TOOLS 17 (SERIAL B )
Form ZA Date 0December/G Page of NON-REVERSING Housing And Motor 0 REVERSING 0 0. Housing Sleeve (Long)(00, 00, 00 RPM) Housing Sleeve (Short)(00, 00, 00, 00 RPM). Pin. Ball Bearing. Lower End Plate. O-Ring.
More informationInstallation Manual v1.0: Aurora Plus Turbo Kit ( ) 5.9L Dodge. Please read all instructions before installation.
Installation Manual v1.0: Aurora Plus - 4000 Turbo Kit (2003-2007) 5.9L Dodge Please read all instructions before installation. Figure 1: Aurora Plus - 4000 Kit Contents 1 Figure 2: Aurora Plus Hardware
More informationSUSPENSION AND AXLE SA 1
SUSPENSION AND AXLE SA1 SA2 TROUBLESHOOTING SUSPENSION AND AXLE TROUBLESHOOTING Use the table below to help you find the cause of the problem. The numbers indicate the priority of the likely cause of the
More informationREMOVAL. 5. REMOVE OIL DIPSTICK GUIDE (a) Remove the bolt, dipstick guide and engine wire bracket. (b) Remove the O ring from the dipstick guide.
EM34 ENGINE MECHANICAL (2RZFE, 3RZFE) P23426 EM1MY01 REMOVAL 1. DRAIN ENGINE COOLANT 2. DISCONNECT THESE CABLES: (a) Disconnect the accelerator cable from the throttle body. A/T: Disconnect the throttle
More information