Tumble Dryer. Parts. 120 Pound Capacity. Starting Serial No Refer to Page 5 for Model Numbers. TMB1268C_

Transcription

1 Tumble Dryer 120 Pound Capacity Starting Serial No Refer to Page 5 for Model Numbers Parts TMB1268C_ Part No R24 December 2018

2

3 Table of Contents Title Page Parts Ordering Information... 3 Serial Plate Location... 3 Model Identification... 5 Product Overview - Heat Source and Voltage... 6 Product Overview - Control Suffixes (Drawing 1 of 2)... 8 Product Overview - Control Suffixes (Drawing 2 of 2) Interior Control Box Exterior Control Box - RM Control Suffix Exterior Control Box - RQ Control Suffix (Drawing 1 of 2) Exterior Control Box - RQ Control Suffix (Drawing 2 of 2) DMP Control Box - C and I Models with RD Control Suffix DX4 Control Box - B Models with R3 Control Suffix Exterior Control Box - RE Control Suffix (Drawing 1 of 2) Exterior Control Box - RE Control Suffix (Drawing 2 of 2) Exterior Control Box - RU Control Suffix Fire Suppression System Control Box Cabinet Front Components Cabinet Front Panels and Nameplates Door Components Hinge Components Lint Panel Components Lint Panel Switch Assembly Lint Screen and Drive Guard Cylinder and Trunnion Assembly Trunnion Bearings Drive Sheave, Step Pulley and Belts Cylinder Drive Motor Moisture Sensing Components Fan Assembly - 50 Hertz Models Fan Motor Assembly - 50 Hertz Models Fan and Fan Motor Assembly - 60 Hertz Models Airflow Switch Gas Heater Components - Non-CE Models Through 3/10/ Gas Heater Components - CE Models Through 3/10/ Gas Heater Components - Models Starting 3/11/ Burner Orifices for Non-CE and Non-Australian Gas Models Steam Heater Components - Except B, C and I Models Steam Heater Components - B, C and I Models Steam Solenoid Valve Electric Heater Components Rotation Sensor Copyright 2018, Alliance Laundry Systems LLC All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher

4 Control Tray Wrap Components for Gas and Steam Models Control Tray Wrap Components for Electric Models Control Tray Fuses Control Tray Harnesses for Gas and Steam Models Control Tray Components for Gas Models Control Tray Components for Steam Models Control Tray Harnesses for Electric Models Control Tray Components for Electric Models Parts Index

5 If literature or replacement parts are required, contact the source from whom the machine was purchased or contact Alliance Laundry Systems at (920) for the name and address of the nearest authorized parts distributor. Parts Ordering Information For technical assistance, call the number listed below: (920) Ripon, Wisconsin When calling or writing about your product, be sure to mention model and serial numbers. Model and serial numbers are located on serial plate(s) as shown. Serial Plate Location Serial Plate TMB3207P_

6 Notes

7 Model Identification Information in this manual is applicable to these tumble dryer models: BA120L BA120N BH120E BH120L BH120N BH120S BK120N BT120E BT120L BT120N BT120S BT120T BU120E BU120L BU120N BU120S BU120T CA120L CA120N CK120N CT120E CT120L CT120N CT120S CT120T CU120E CU120L CU120N CU120S CU120T GA120L GA120N GH120E GH120L GH120N GH120S GK120N GT120E GT120L GT120N GT120S GT120T GU120E GU120L GU120N GU120S GU120T HA120L HA120N HH120E HH120L HH120N HH120S HK120N HT120E HT120L HT120N HT120S HT120T HU120E HU120L HU120N HU120S HU120T IT120E IT120L IT120N IT120S IT120T KA120L KA120N KK120N KT120E KT120L KT120N KT120S KT120T KU120E KU120L KU120N KU120S KU120T LA120L LA120N LK120N LT120E LT120L LT120N LT120S LT120T LU120E LU120L LU120N LU120S LU120T NH120E NH120L NH120N NH120S NT120E NT120L NT120N NT120S NU120E NU120L NU120N NU120S PA120L PA120N PH120E PH120L PH120N PH120S PK120N PT120E PT120L PT120N PT120S PT120T PU120E PU120L PU120N PU120S PU120T SA120L SA120N SH120E SH120L SH120N SH120S SK120N ST120E ST120L ST120N ST120S ST120T SU120E SU120L SU120N SU120S SU120T UA120L UA120N UH120E UH120L UH120N UH120S UK120N UT120E UT120L UT120N UT120S UT120T UU120E UU120L UU120N UU120S UU120T XT120L XT120N XT120S XT120T XU120L XU120N XU120S XU120T YT120L YT120N YT120S YT120T YU120E YU120L YU120N YU120S YU120T

8 Product Overview - Heat Source and Voltage DESIGN MODEL NO. SERIAL NO. 120 VAC. 60 Hz 9.3 AMP 1 Ph 2 WIRES + GROUND 14 REC. AWG WIRE SIZE RECOMMENDED CIRCUIT BREAKER : 15 AMPS WIRING DIAGRAM PART NUMBER: CERTIFIED ANS Z21.5.2bCSA 7.2b-2003 CLOTHES DRYER, VOL.II ANS Z21.5.2bCSA 7.2b-2003 Secheuses, VOL.II C US TMB2907P_

9 Product Overview - Heat Source and Voltage REF PART NO. DESCRIPTION COMMENTS 1 - Heat Source E: Electric L: Liquid Petroleum Gas (L.P.) N: Natural Gas (N.G.) S: Steam T: Thermal Oil 2 - Voltage F6: or 240 Volt/60 Hertz/3 Phase J5: 230 Volt/50 Hertz/3 Phase J8: 240 Volt/60 Hertz/3 Phase M1: 380 Volt/50 Hertz/3 Phase M2: 380 or Volt/50 Hertz/3 Phase M3: 380 Volt/60 Hertz/3 Phase N1: Volt/50 Hertz/3 Phase P1: 440 Volt/60 Hertz/3 Phase Q1: Volt/60 Hertz/3 Phase Q2: 480 Volt/60 Hertz/3 Phase

10 Product Overview - Control Suffixes (Drawing 1 of 2) All Models Except G and K Models DESIGN MODEL NO. SERIAL NO. 120 VAC. 60 Hz 9.3 AMP 1 Ph 2 WIRES + GROUND 14 REC. AWG WIRE SIZE RECOMMENDED CIRCUIT BREAKER : 15 AMPS WIRING DIAGRAM PART NUMBER: CERTIFIED ANS Z21.5.2bCSA 7.2b-2003 CLOTHES DRYER, VOL.II ANS Z21.5.2bCSA 7.2b-2003 Secheuses, VOL.II C US RQ Control Suffixes 1 ON / SELECT HIGH START STATUS DRYING AUTO AUTO PROGRAM TIME DRYING COOLING TEMPERATURE MEDIUM MED LOW LOW NO HEAT STOP/RESET TEMP DISPLAY F/ C SIGNAL REVERSING COOL DOWN DOOR OPEN CUSTOM * SPECIAL CYCLE AUTO TEMP CONDITION * SPECIAL TIME COOL DOWN MORE LESS + -- SAVE CUSTOM REV START STOP PROG RD Control Suffixes RM Control Suffixes R3 Control Suffixes 1 Load clothes Cargue ropa PROGRAM ENERGY SAVER HEATING 2 Close door Cierre la puerta PROGRAM ENERGY SAVER HEATING STOP 3 Select cycle Seleccione ciclo BACK START 4 Push START Presione INICIO RU Control Suffix RE Control Suffix RE Control Suffix PROGRAM ENERGY SAVER HEATING ECO STOP START BACK START BACK STOP RE Control Suffix RE Control Suffix RE Control Suffix STOP BACK START RE Control Suffix RE Control Suffix RE Control Suffix TMB3355P_

11 Product Overview - Control Suffixes (Drawing 1 of 2) REF PART NO. DESCRIPTION COMMENTS 1 - Control - Reversing RQ: reversing dual digital timer 2 - Control - Reversing RD: reversing DMP OPL 3 - Control - Reversing RM: reversing OPL micro 4 - Control - Reversing R3: reversing DX4 OPL 5 - Control - Reversing U models; RU: reversing UniLinc OPL 6 - Control - Reversing S models; RE: reversing LED OPL 7 - Control - Reversing H models; RE: reversing LED OPL 8 - Control - Reversing U models; RE: reversing LED OPL 9 - Control - Reversing B, C, and I models; RE: reversing LED OPL 10 - Control - Reversing P models; Models through 9/30/14; RE: reversing LED OPL 11 - Control - Reversing P models; Models starting 10/1/14 through 5/31/15; RE: reversing LED OPL 12 - Control - Reversing N and Y models; L models through 5/31/15; RE: reversing LED OPL 13 - Control - Reversing L and P models; Models starting 6/1/15; RE: reversing LED OPL NOTE: OPL models have the following control suffixes: R3, RD, RE, RM, RQ and RU

12 Product Overview - Control Suffixes (Drawing 2 of 2) G and K Models DESIGN MODEL NO. SERIAL NO. 120 VAC. 60 Hz 9.3 AMP 1 Ph 2 WIRES + GROUND 14 REC. AWG WIRE SIZE RECOMMENDED CIRCUIT BREAKER : 15 AMPS WIRING DIAGRAM PART NUMBER: CERTIFIED ANS Z21.5.2bCSA 7.2b-2003 CLOTHES DRYER, VOL.II ANS Z21.5.2bCSA 7.2b-2003 Secheuses, VOL.II C US BACK PROSERIESII RM Control Suffixes RE Control Suffix TMB3145P_

13 Product Overview - Control Suffixes (Drawing 2 of 2) REF PART NO. DESCRIPTION COMMENTS 1 - Control - Reversing RM: reversing OPL micro 2 - Control - Reversing RE: reversing LED OPL NOTE: OPL models have the following control suffixes: RE and RM

14 Interior Control Box TMB3006P_

15 Interior Control Box REF PART NO. DESCRIPTION COMMENTS Main Harness Models through 7/31/ Main Harness Steam models starting 8/1/11; Gas models starting 8/1/11 through 3/10/ Main Harness Gas models starting 3/11/ Main Harness Electric models Control Box Control Housing Cover

16 Exterior Control Box - RM Control Suffix H, S and U Models Through 7/31/11 G, K, L, P, X and YU Models Through 1/1/12 TMB3294P_

17 Exterior Control Box - RM Control Suffix REF PART NO. DESCRIPTION COMMENTS NA M413930P Ferrite Core Assembly 2 required NA M4795P3W Security Cover Kit NA M4457P3 RC Filter Kit Includes (2) F330217P RC Filter and instructions Control Trim Black; G, K, L, P, S, U, X and YU models Control Trim Gray; H models Washer 2 required Screw 6 required * Control Cover G and K non-ce models Control Cover G and K non-ce models; Stainless steel * Control Cover All other non-ce models 4 N/A Control Cover All other non-ce models; Stainless steel W Control Cover GU and KU models 4 N/A Control Cover All other CE models Control Cover GU and KU models; Stainless steel Control Cover XU and YU models; Stainless steel Control Cover All other CE models; Stainless steel 5 M Nut 8 required per control trim Jumper Calibration Wire P Control Panel Harness Non-CE models P Control Panel Harness CE models Overlay S, U, X and YU models; Text Overlay L, S and U models; Icon Overlay H models; Text Overlay H models; Icon Overlay P models Overlay G and K models; Text and icon Expansion Clip 6 required per control plate Control Plate Assembly Includes studs P Control Kit Includes tape W Control Mounting Bracket G and K models W Control Mounting Bracket All other models Nut 4 required per control plate Screw 4 required 15 M Drive Rivet 2 required 16 M Relay CE models Relay/Buzzer Bracket 18 M414368P Membrane Switch Bypass Harness Non-CE models P Emergency Stop Contact Harness 1 contact; CE models P Emergency Stop Harness 2 contacts; CE models 21 F Contact Block Switch CE models; Models through 8/17/14 21 F Contact Switch CE models; Models starting 8/18/14 21 F Contact Base CE models; Models starting 8/18/ Emergency Stop Label CE models 23 F Emergency Stop Pushbutton CE models * Add Letter To Designate Color. Q - Bisque W - White N/A = Part no longer available

18 Exterior Control Box - RQ Control Suffix (Drawing 1 of 2) C, H, I, L, N, P, S, U, X and YT Models G and K Models Starting 1/16/12 TMB3295P_

19 Exterior Control Box - RQ Control Suffix (Drawing 1 of 2) REF PART NO. DESCRIPTION COMMENTS NA M4795P3W Security Cover Kit Rocker Switch 2 required Rocker Switch Reversing 3 M Switch Plate Reversing Rocker Switch Start Overlay G, K, L, N, S, X and YT models; C and I models through 7/14/14; U models through 8/17/14; P models starting 1/15/ Overlay C and I models starting 7/15/14; Reversing Overlay U models; Models starting 8/18/ Overlay H models Overlay P models through 1/14/ Washer Screw Expansion Clip 6 required Jumper Calibration Wire P Control Harness Jumper P Control Panel Harness Temperature Knob Nut Temperature Selector Switch Bracket 15 D Temperature Selector Switch 16 M4860P3 Buzzer Kit Includes bracket, buzzer and wire harness Screw LG Control Mounting Bracket Light gray; U models * Control Mounting Bracket Control Mounting Bracket Stainless steel; Models through 3/31/ Control Mounting Bracket Stainless steel; Models starting 4/1/ Nut 2 required 20 D512218P Display Assembly C and I models through 7/14/14; All other models P Control Assembly C and I models starting 7/15/ Nut 4 required Panel Locator 4 required 23 M Drive Rivet 2 required Control Plate and Studs Assembly Includes stud * Add Letter To Designate Color. Q - Bisque W - White

20 Exterior Control Box - RQ Control Suffix (Drawing 2 of 2) C, H, I, L, N, P, S, U, X and YT Models G and K Models Starting 1/16/12 TMB3295PA_

21 Exterior Control Box - RQ Control Suffix (Drawing 2 of 2) REF PART NO. DESCRIPTION COMMENTS NA M4795P3W Security Cover Kit Control Chassis Mounting Bracket 2 D512202P Control Assembly Screw Washer 5 M Nut LG Control Cover Non-CE and non-australian U models; Light gray * Control Cover Non-CE models Control Cover Non-CE models through 3/31/15; Stainless steel Control Cover Non-CE models starting 4/1/15; Stainless steel LG Control Cover CE U gas models; Light gray LG Control Cover CE U steam and electric models; Light gray LG Control Cover Australian U models; Light gray * Control Cover CE models Control Cover CE models through 3/31/15; Stainless steel Control Cover CE models starting 4/1/15; Stainless steel 7 F Contact Block Switch CE models; Models through 8/17/14 7 F Contact Switch CE models; Models starting 8/18/14 7 F Contact Base CE models; Models starting 8/18/ P Emergency Stop Contact Harness 1 contact; CE models P Emergency Stop Harness 2 contacts; CE models Bypass Harness Non-CE models Emergency Stop Label CE models 11 F Emergency Stop Pushbutton CE models Control Trim Black; N, S, U, X and YT models Control Trim Gray; H models * Add Letter To Designate Color. Q - Bisque W - White

22 DMP Control Box - C and I Models with RD Control Suffix Models Through 7/31/11 TMB3007P_

23 DMP Control Box - C and I Models with RD Control Suffix REF PART NO. DESCRIPTION COMMENTS NA M413930P Ferrite Core Assembly Use with item * Control Cover Non-CE models Control Cover Non-CE models; Stainless steel * Control Cover CE models Control Cover CE models; Stainless steel P Membrane Switch Relay/Buzzer Bracket Nut 2 required 5 M Relay CE models Male Tab Terminal 7 D Adjustable Buzzer * Control Mounting Bracket Non-CE models Control Mounting Bracket Non-CE models; Stainless steel Nut 4 required P Electronic Control Control Plate Assembly P Rotation Sensor Kit P Rotation Sensor Kit P Control Panel Harness Assembly Non-CE and non-australian models P Control Panel Harness CE and Australian models * Add Letter To Designate Color. Q - Bisque W - White

24 DX4 Control Box - B Models with R3 Control Suffix TMB3240P_

25 DX4 Control Box - B Models with R3 Control Suffix REF PART NO. DESCRIPTION COMMENTS NA M413930P Ferrite Core Assembly Use with item * Control Cover Non-CE models Control Cover Non-CE models through 3/31/15; Stainless steel Control Cover Non-CE models starting 4/1/15; Stainless steel * Control Cover CE models Control Cover CE models through 3/31/15; Stainless steel Control Cover CE models starting 4/1/15; Stainless steel Graphic Overlay 2 259/00005/00 Overlay PRO HC control replacement; Refer to Parts Information Insert for list of machine serial numbers Control Plate Assembly CE models Sleeve 4 required P Control Assembly 5 254/00070/00 Control Board PRO HC control replacement; Refer to Parts Information Insert for list of machine serial numbers Nut 4 required Relay/Buzzer Bracket Nut 9 D Screw 10 M Relay CE models Male Tab Terminal Bypass Harness Non-CE models Control Panel Harness Non-CE and non-australian models Control Panel Harness CE and Australian models P Rotation Sensor Kit P Rotation Sensor Kit * Add Letter To Designate Color. Q - Bisque W - White

26 Exterior Control Box - RE Control Suffix (Drawing 1 of 2) B, C, H, I, N, S and U Models G, K, L, P and Y Models Starting 1/16/12 TMB3296P_

27 Exterior Control Box - RE Control Suffix (Drawing 1 of 2) REF PART NO. DESCRIPTION COMMENTS NA USB IR Interface Kit Control Trim Black; N, S and U models Control Trim Gray; H models Washer 2 required Screw 6 required DG Control Cover Dark gray; Non-CE P models; Models starting 10/1/ * Control Cover Non-CE P models through 9/30/14; All other non-ce models LG Control Cover Light gray; Non-CE U models Control Cover Non-CE models through 3/31/15; Stainless steel Control Cover Non-CE models starting 4/1/15; Stainless steel DG Control Cover Dark gray; CE P models; Models starting 10/1/ * Control Cover CE P models through 9/30/14; All other CE models LG Control Cover Light gray; CE U models Control Cover CE models through 3/31/15; Stainless steel Control Cover CE models starting 4/1/15; Stainless steel 5 M Nut Overlay S models Overlay H models Overlay B, C, and I models; Models through 7/14/ Overlay B, C, and I models; Models starting 7/15/ Overlay U models; Models through 8/17/ Overlay U models; Models starting 8/18/ Overlay G and K models Overlay P models; Models through 9/30/ Overlay P models starting 10/1/14 through 5/31/15; L models starting 1/29/15 through 5/31/ Overlay N and Y models; L models through 1/28/ Overlay L and P models starting 6/1/ Output Harness Use between control assemblies Control Panel Harness Goes from control assembly to main harness Expansion Clip 6 required per control plate 10 D Screw Nut Output Bracket DG Control Mounting Bracket Dark gray; P models; Models starting 10/1/ W Control Mounting Bracket P models through 9/30/14; All other models LG Control Mounting Bracket Light gray; U models Control Mounting Bracket All models except P models through 3/31/15; Stainless steel Control Mounting Bracket All models except P models starting 4/1/15; Stainless steel * Add Letter To Designate Color. Q - Bisque W - White

28 Exterior Control Box - RE Control Suffix (Drawing 2 of 2) B, C, H, I, N, S and U Models G, K, L, P and Y Models Starting 1/16/12 TMB3296PA_

29 Exterior Control Box - RE Control Suffix (Drawing 2 of 2) REF PART NO. DESCRIPTION COMMENTS Pop Rivet 2 required Spacer 2 required 3 D Screw P Control Assembly P Control Assembly H, S and U models; L and P models starting 6/1/ P Control Assembly B, C, and I models; Models through 7/14/ P Control Assembly B, C, and I models; Models starting 7/15/ P Control Assembly P models through 5/31/15; L models starting 1/29/15 through 5/31/ P Control Assembly G and K models P Control Assembly N and Y models; L models through 1/28/ Control Plate and Studs Assembly Expansion Clip 6 required per control plate Bypass Harness Non-CE models Jumper Calibration Wire P Emergency Stop Harness 2 contacts; CE models 11 F Contact Block Switch CE models; Models through 8/17/14 11 F Contact Switch CE models; Models starting 8/18/14 11 F Contact Base CE models; Models starting 8/18/ Screw 6 required Emergency Stop Label CE models 14 F Emergency Stop Pushbutton CE models * Add Letter To Designate Color. Q - Bisque W - White

30 Exterior Control Box - RU Control Suffix U Models TMB3297P_

31 Exterior Control Box - RU Control Suffix REF PART NO. DESCRIPTION COMMENTS NA NK209 Network Retrofit Kit Wired NA NK220 Network Controller Kit Wired NA NK309 Wireless Network Kit Wireless NA NK320 Ethernet Gateway Kit Wireless NA NK330 USB Gateway Kit Wireless NA USB IR Interface Kit Screw 6 required Washer 2 required Overlay Models through 8/17/ Overlay Models starting 8/18/ Expansion Clip 6 required per control plate Control Panel Harness Goes from item 15 to main harness Output Harness Use between item 14 and item Output Bracket Nut Output Bracket W Control Mounting Bracket Models through 8/17/ LG Control Mounting Bracket Models starting 8/18/14; Light gray Control Mounting Bracket Stainless steel; Models through 3/31/ Control Mounting Bracket Stainless steel; Models starting 4/1/ Pop Rivet 2 required Spacer 2 required 13 D Screw P Control Assembly P Control Assembly Jumper Calibration Wire Control Plate Assembly Bypass Harness Non-CE models P Emergency Stop Harness 2 contacts; CE models 20 F Contact Block Switch CE models; Models through 8/17/14 20 F Contact Switch CE models; Models starting 8/18/14 20 F Contact Base CE models; Models starting 8/18/ Emergency Stop Label CE models 22 F Emergency Stop Pushbutton CE models * Control Cover Non-CE models; Models through 8/17/ * Control Cover Non-CE models; Models starting 8/18/ LG Control Cover Non-CE models; Models starting 8/18/ Control Cover Non-CE models through 3/31/15; Stainless steel Control Cover Non-CE models starting 4/1/15; Stainless steel * Control Cover CE models; Models through 8/17/ * Control Cover CE steam and electric models; Models starting 8/18/ * Control Cover CE gas models; Models starting 8/18/ LG Control Cover CE models; Models starting 8/18/ Control Cover CE models through 3/31/15; Stainless steel Control Cover CE models starting 4/1/15; Stainless steel * Add Letter To Designate Color. Q - Bisque W - White

32 Fire Suppression System Control Box B, C, G, H, I, K, L, P, S and U Gas and Steam Models Models Through 7/31/11 with a K, L, N, T, U or W in the 11th Character (ST120NRTF6K1W01) Models Starting 8/1/11 with a C, D or Y in the 11th Character TMB3435P_

33 Fire Suppression System Control Box REF PART NO. DESCRIPTION COMMENTS NA Manifold Gas models NA Manifold Steam models Screw 2 M Drive Rivet Control Box Top Top Control Box Housing Screw 6 D Circuit Board Support 4 required P Control Control Harness Sensor Harness Assembly Control Box Cover P Lock, Key and Nut Kit RL001 key code Key RL Light Red Hose Fitting Non-CE and non-australian models 14 F Water Hose 2 required; Non-CE and non-australian models P Fill Hose Kit CE and Austrialian models Thermistor 2 required Hose Clamp Hose 21 inches; Outlet hose P Mixing Valve W Push-to-Start Switch 2 required Control Box Base Mixing Valve Shield Bracket Snap Bushing

34 Cabinet Front Components TMB3198P_

35 Cabinet Front Components REF PART NO. DESCRIPTION COMMENTS NA 298P4P Spray Paint White NA 122P4P Porcelain Touch-Up Paint White NA 370P4P Porcelain Touch-Up Paint Bisque Label B, C, H, I, S and U models; C.A.R.E Label G and K models; F.S.S Label L and P models; Safe Tech Nut 2 required Harness Strap 2 required; Front panel harness to door switch wire channel Screw 4 required Door Switch Harness 6 M Snap Bushing Required for door switch harness going through frame Door Switch Wire Channel Nut 2 required Door Switch Door Switch Cover Screw 2 required 12 M Screw 2 required Screw 2 required Door Hinge Lug Assembly Includes bushings; C, H, L, N, P, S, U, X and Y models; B and I models through 7/31/ Door Hinge Lug Assembly Black; G and K models; B and I models starting 8/1/ Pop Rivet 2 required 16 M Door Latch DG Front Panel Dark gray; P models; Models starting 10/1/ LG Front Panel Light gray; U models; Models starting 8/18/14; Gray Front Panel U models; Models starting 8/18/14 through 3/31/15; Stainless steel Front Panel U models; Models starting 4/1/15; Stainless steel W Front Panel U models; Models starting 8/18/14; White W Front Panel P models through 9/30/14 and starting again 7/1/17; U models through 8/17/14; All other models Front Panel U models through 8/17/14; All other models through 3/31/15; Stainless steel Front Panel All models except P and U starting 4/1/15; Stainless steel Screw 4 required per panel Washer 4 required per panel Nut Access and front panel attachment

36 Cabinet Front Panels and Nameplates TMB3497P_

37 Cabinet Front Panels and Nameplates REF PART NO. DESCRIPTION COMMENTS NA M4786P3 Front Access Panel and Door Hinge B and I models; To change from old look to new look Kit Nameplate C models Nameplate B and I models through 7/9/12 1 B Nameplate B and I models starting 7/10/ DG Top Access Panel Gusset Dark gray; P models starting 10/1/14; L models starting 1/29/15; Left * Top Access Panel Gusset P models through 9/30/14; L models through 1/28/15; All other models; Left LG Top Access Panel Gusset Light gray; U models; Left * Access Panel L models; P models through 9/30/ DG Front Access Panel Dark gray; P models; Models starting 10/1/ Access Panel L and XT models through 3/31/15; PH, PK, PT, and PU models through 9/30/14; Stainless steel Front Access Panel L and P models starting 4/1/15; Stainless steel *P Front Access Panel C, G, H, K, L, N, S and Y models; CE B models through 7/31/11; I models through 7/31/11; U models through 8/17/14; P models through 9/30/ B Front Access Panel B and I models starting 8/1/ LG Front Access Panel Light gray; U models; Models starting 8/18/ Front Access Panel CK, CT, HH, HK, HT, SH, SK, ST, UH and UK, UT models through 3/31/15; I models through 7/31/11; Stainless steel Front Access Panel H, S, U and X models starting 4/1/15; Stainless steel 4 M Nut L and P models require 2 for access panel trim; U models starting 8/18/14 require DG Top Access Panel Dark gray; P models starting 10/1/14; L models starting 1/29/15; Right * Top Access Panel Gusset P models through 9/30/14; L models through 1/28/15; All other models; Right LG Top Access Panel Gusset Light gray; U models; Right Nut Screw 4 required Nameplate H models Nameplate S models Nameplate Overlay U models; Models through 8/17/14 8 F Nameplate U models; Models starting 8/18/ Nameplate Overlay P models; Models through 9/30/ Nameplate P models; Models starting 10/1/ Nameplate L models; Models through 3/27/ Nameplate L models; Models starting 3/28/ Nameplate Overlay G models Nameplate Overlay K models Nameplate X models Nameplate Overlay Y models Access Panel Trim G and K models; Mounts over front panel assembly and control panel Label G and K models; Coin * Add Letter To Designate Color. Q - Bisque W - White

38 Door Components TMB3091P_

39 Door Components REF PART NO. DESCRIPTION COMMENTS NA M4786P3 Front Access Panel and Door Hinge B and I models; To change from old look to new look Kit P Door Assembly H models P Door Assembly N and S models; U models through 8/17/ Door Assembly U models; Models starting 8/18/ Door Assembly B, C, and I models through 7/31/ Door Assembly B, C, and I models starting 8/1/ Door Assembly X and Y models; P models through 9/30/14; L models through 1/28/ LG Door Assembly Light gray; P models starting 10/1/14; L models starting 1/29/ B Door Assembly P models starting 7/5/16; Use with stainless steel front panel; Black Door Assembly G and K models P Door Ring Gasket Nut H, N and S models; 4 required Nut 6 required B Handle Bar G and K models P Door Seal Kit Use Loctite 414 for seal P Door Glass H models P Door Glass All other models 8 M4221P4 Door Glass Installation Tool Pop Rivet G and K models; 4 required Washer G and K models; 2 required Nameplate Overlay G models; Coin Nameplate Overlay K models; Coin 12 M Nut Door Handle H models Door Handle N and S models; B, C and I models starting 8/1/11; U models through 8/17/ Door Handle U models; Models starting 8/18/14; Use Screw, Screw and Nut to attach Door Ring Assembly H, N and S models; P models through 9/30/14; U models through 8/17/14; L models through 1/28/ Door Ring Assembly U models; Models starting 8/18/ LG Door Ring and Handle Assembly Light gray; P models starting 10/1/14; L models starting 1/29/ B Door Ring and Handle Assembly P models starting 7/5/16; Use with stainless steel and white front panel; Black Door Ring and Handle Assembly B, C and I models through 7/31/ B Door Ring Assembly B, C and I models starting 8/1/ B Door Ring Assembly G and K models 15 M Screw Door strike Screw H, N and S models; 4 required

40 Hinge Components TMB3091PA_

41 Hinge Components REF PART NO. DESCRIPTION COMMENTS NA M4786P3 Front Access Panel and Door Hinge B and I models; To change from old look to new look Kit P Door Switch Actuator Kit B Door Hinge G and K models; B and I models starting 8/1/11; P models starting 7/1/17 with white front panel and starting 7/5/16 with stainless steel front panel * Door Hinge Assembly H, N, S, U and Y models; C models starting 8/1/11; P models through 9/30/14; L models through 1/28/ Door Hinge Assembly C, H, S, U and Y models through 3/31/15; B and I models through 7/31/11; P models through 9/30/14; L models through 1/28/15; Stainless steel Door Hinge Assembly H, S, U and Y models starting 4/1/15; Stainless steel LG Door Hinge Assembly Light gray; L, P and U models Screw 3 required 4 M Screw 6 required 5 M4773P3 Cam and Hinge Kit G and K models; B and I models starting 8/1/11 5 M4772P3 Cam and Hinge Kit C, H, L, N, P, S, U and Y models; B and I models through 7/31/11; P models starting 7/1/17 with white front panel and starting 7/5/16 with stainless steel front panel Screw G and K models; B and I models starting 8/1/11; P models starting 7/1/17 with white front panel and starting 7/5/16 with stainless steel front panel; 2 required Screw C, H, L, N, P, S, U and Y models; B and I models through 7/31/11; 2 required Door Hinge Lug Assembly Black; G and K models; B and I models starting 8/1/11; P models starting 7/1/17 with white front panel and starting 7/5/16 with stainless steel front panel Door Hinge Lug Assembly C, H, L, N, P, S, U and Y models; B and I models through 7/31/ Pop Rivet 2 required * Add Letter To Designate Color. Q - Bisque W - White

42 Lint Panel Components TMB1981P_

43 Lint Panel Components REF PART NO. DESCRIPTION COMMENTS Handle and Caps Assembly B, C, I, N, S, X, U and Y models; L models through 1/28/15; P models through 9/30/14 and starting again 7/1/17 with white front panel and starting 7/5/16 with stainless steel front panel; Black; Includes endcaps Handle Bumper P models starting 10/1/14; L models starting 1/29/ Handle and Caps Assembly H and U models; Gray; Includes endcaps Handle Bumper G and K models; Black and blue; Does not have endcaps Screw 6 required Roller Catch Mounting Bracket 2 required 4 H Roller Catch 2 required; Includes strike Screw 8 required 6 D Screw 4 required Nut 8 required DG Lint Panel Dark gray; P models; Models starting 10/1/ Lint Panel P models; Models starting 10/1/14 through 3/31/15; Stainless steel Lint Panel P models; Models starting 4/1/15; Stainless steel *P Lint Panel P models through 9/30/14; All other models Lint Panel P models through 9/30/14; All other models through 3/31/15; Stainless steel Lint Panel All models except P models starting 4/1/15; Stainless steel LG Lint Panel Light gray; U models 9 M Washer 4 required Nut 4 required Lint Panel Clip 2 required Bolt 4 required Kickplate All models except H models; Black Kickplate H and U models; Gray Pop Rivet Black; 6 required Pop Rivet Gray; 6 required * Add Letter To Designate Color. Q - Bisque W - White

44 Lint Panel Switch Assembly TMB2992P_

45 Lint Panel Switch Assembly REF PART NO. DESCRIPTION COMMENTS Base Harness 2 M Bushing Pop Rivet 2 required Screw 2 required Lint Panel Switch Cover Switch Assembly With boot Lint Panel Switch Bracket

46 Lint Screen and Drive Guard TMB3498P_

47 Lint Screen and Drive Guard REF PART NO. DESCRIPTION COMMENTS Nut Screw Thermistor 2 required; For fire suppression system Belt Guard Side; 2 required; Use Gasket on edges 5 M Clip Belt Guard Top 7 M Vent Pipe Gas models; Models through 12/31/09 7 M Vent Pipe Steam models; Gas and electric models starting 1/1/10 8 M Screw P Belt Guard Back; Non-moisture sensing Belt Guard Back; Moisture sensing Guard Extension Moisture sensing Screw 12 M Screw Nut Belt Guard Bottom 15 H Vent Elbow 16 M Cable Tie Required for thermistor harness 17 M Thermistor 17 B Temperature Sensor Assembly PRO HC control replacement; Refer to Parts Information Insert for list of machine serial numbers Thermistor Bracket Assembly Includes bracket and thermistor nut 19 H Lint Screen Clip Lint Screen Includes frame P Lint Screen Includes snaps; Frame not included Nut Screw 23 M Insulation 24 M Bushing 2 required for thermistor harness and cabinet rear 25 M Felt Pad 6 required; Behind front panel * Add Letter To Designate Color. Q - Bisque W - White

48 Cylinder and Trunnion Assembly TMB1811B_

49 Cylinder and Trunnion Assembly REF PART NO. DESCRIPTION COMMENTS Cylinder and Trunnion Assembly Galvanized; Non-moisture sensing Cylinder and Trunnion Assembly Galvanized; Moisture sensing Cylinder and Trunnion Assembly Stainless steel; Non-moisture sensing Cylinder and Trunnion Assembly Stainless steel; Moisture sensing 2 H Cylinder Assembly Galvanized; Includes items 4 and 8; Non-moisture sensing Cylinder Assembly Galvanized; Moisture sensing 2 M Cylinder Assembly Stainless steel; Includes items 4 and 8; Non-moisture sensing Cylinder Assembly Stainless steel; Moisture sensing Trunnion Assembly Non-moisture sensing Trunnion Assembly Moisture sensing 4 H Nut 8 required Washer 4 required 6 M Spacer As required 7 M Nut 4 required 8 H Bolt 4 required Cylinder Rib Assembly Moisture sensing

50 Trunnion Bearings TMB3251P_

51 Trunnion Bearings REF PART NO. DESCRIPTION COMMENTS 1 H Nut 2 M Washer Washer Nut 5 H Screw 6 M Screw P Flange Bearing 8 H Bearing Mounting 9 M Spacer As required 10 H Screw

52 Drive Sheave, Step Pulley and Belts TMB2585P_

53 Drive Sheave, Step Pulley and Belts REF PART NO. DESCRIPTION COMMENTS 1 H Nut 2 M Washer Rod End Eyebolt assembly 4 M Screw Washer 6 H Belt Adjustment Tube 7 M Washer 8 required Screw 4 required 9 H Jackshaft Assembly Nut 4 required 11 H Retaining Ring Step pulley bearings stops; 2 required 12 H Ball Bearing Inner; Step pulley 13 H Belt 14 M4696P3 Step Pulley and Bearing Kit Includes H Step Pulley, M Spacer, M4718P3 Step Pulley Outer Bearing Kit and items 11, 12 and M Ball Bearing Outer 16 H Retaining Ring Step pulley to jackshaft 17 H P Belt Set Set of 3 18 H HP Bushing Includes M Washer, Screw and Screw 19 H H Sheave 20 H Sheave 50 Hertz; 3.35 inch OD 20 H Sheave 60 Hertz; 4.12 inch OD 21 M Washer 4 required

54 Cylinder Drive Motor TMB2995P_

55 Cylinder Drive Motor REF PART NO. DESCRIPTION COMMENTS Cylinder Motor Harness 2 H P Bushing Includes Screw, Screw and Washer; Key not included 3 H Sheave 60 Hertz; 4.12 inch OD 3 H Sheave 50 Hertz; 3.35 inch OD 4 H H Key P Motor Volt/60 Hertz/3 Phase; Includes key; No capacitor P Motor Volt/50 Hertz/3 Phase; Includes key; No capacitor Motor 380 Volt/60 Hertz/3 Phase; Includes key; No capacitor 6 M Screw 7 M Washer 8 M Nut 9 M Washer 10 M Motor Base 11 M Washer Nut 13 H Nut 14 M Washer Rod End Eyebolt assembly Washer 17 H Belt Adjustment Tube 18 M Screw 19 H Base Bracket

56 Moisture Sensing Components TMB3444P_

57 Moisture Sensing Components REF PART NO. DESCRIPTION COMMENTS NA Moisture Sensor Test Wires Use to troubleshoot the moisture sensor circuit NA Moisture Sensing Harness Kit Rib Wire Screw Washer Circuit Plug Shaft Wire 6 M Nut Slip Ring Assembly Moisture Sensor Harness Assembly Goes from item 7 to main harness

58 Fan Assembly - 50 Hertz Models TMB2996P_

59 Fan Assembly - 50 Hertz Models REF PART NO. DESCRIPTION COMMENTS 1 M412917P Bushing 2 required; Includes Screw, Washer and Screw; Key not included 2 H H Screw 3 required Thermostat Non-CE and non-australian gas models and all electric and steam models Thermostat CE and Australian gas models; Manual reset Screw 5 M Plug 6 H H Thermostat Load ready Screw Nut 9 M Damper Assembly 10 M Fan and Bushing Assembly Discard bushing on 50 Hertz models 11 H Blower Cover 12 M Screw 3 required 13 M Washer 10 required Nut 6 required 15 M Washer 4 required 16 M Washer 8 required 17 H608P3 Blower Motor Base Kit 18 H H Key 2 required 19 H H Ball Bearing Insert 20 H H Bearing Mounting Flangette 2 required 21 M Blower Shaft Ball Bearing 23 M Screw 4 required Screw 2 required Screw 3 required Washer 6 required Screw 28 H Sheave 2.8 inch OD Nut 3 required 30 M Washer 3 required

60 Fan Motor Assembly - 50 Hertz Models TMB2997P_

61 Fan Motor Assembly - 50 Hertz Models REF PART NO. DESCRIPTION COMMENTS 1 M Washer 2 M Screw 3 H608P3 Blower Motor Base Kit Bracket Nut 5 M Washer 6 H Motor Adjustment Tube Washer 8 H Nut Rod End Eyebolt assembly; Belt adjuster 10 H Nut 11 M Washer 12 H H Belt Screw 3 required 14 H P Bushing Includes Screw, Washer and Screw; Key not included Washer 3 required Fan Motor Harness 17 H Sheave 3.35 inch OD P Fan Motor 200, 240, 380 and 415 Volt; No capacitor 19 M Screw 20 M Motor Base 21 M Washer 22 H Base Bracket Screw Nut 25 M Washer 26 H Screw

62 Fan and Fan Motor Assembly - 60 Hertz Models TMB2998P_

63 Fan and Fan Motor Assembly - 60 Hertz Models REF PART NO. DESCRIPTION COMMENTS Washer 2 H H Screw 3 required; Fan bushing Thermostat Screw 5 H P Bushing Includes Screw, Washer and Screw; Key not included 6 H H Thermostat Load ready Screw Nut 9 M Damper Assembly 10 M Fan and Bushing Assembly Included with item 5 and hardware 11 H Blower Cover 12 M Washer Nut 14 M Washer 15 H608P3 Blower Motor Base Kit 16 M Washer Nut 18 M Screw 4 required 19 M Screw 4 required 20 M Connector P Motor , 240, Volt; No capacitor Motor 380 Volt/60 Hertz/3 Phase; No capacitor

64 Airflow Switch TMB3000P_

65 Airflow Switch REF PART NO. DESCRIPTION COMMENTS NA P Airflow Switch Kit Models through 9/18/11; Includes items 1-6 NA Airflow Switch Assembly Models starting 9/19/11; Includes items Switch Airflow Switch Arm Screw Switch Bracket Airflow Switch and Arm Bracket Airflow Switch Vane Models through 9/18/ Airflow Switch Vane Models starting 9/19/

66 Gas Heater Components - Non-CE Models Through 3/10/13 TMB3045P_

67 Gas Heater Components - Non-CE Models Through 3/10/13 REF PART NO. DESCRIPTION COMMENTS NA M4577P3 Conversion Kit Natural Gas (N.G.) to Liquid Petroleum Gas (L.P.); 60 Hertz models through 2/14/11 NA M4578P3 L.P. Gas Conversion Kit N.G. to L.P.; 60 Hertz models starting 2/15/11 NA M4973P3 L.P. Gas Conversion Kit N.G. to L.P.; 50 Hertz models through 2/14/11 NA M4975P3 L.P. Gas Conversion Kit N.G. to L.P.; 50 Hertz models starting 2/15/11 NA M Harness Assembly NA M Stove Partition Gasket 3 feet Screw 2 M Thermostat Cover P Gas Stove Assembly 4 M Stove Limit Thermostat Non-Australian models through 10/31/11 4 M Thermostat Australian models through 10/31/ Thermostat Non-Australian models starting 11/1/ Thermostat Australian models starting 11/1/11; Korean models Stove Limit Harness Bracket 6 M412025P Burner 3 required P Spark Electrode Screw 2 required Snap Bushing 2 required 10 M Gas Valve Bracket 11 M Stove Gasket Sold per foot; 3 feet required Pipe Cap 13 M Pipe Bracket 14 H Nipple 3 required Pipe Tee Pipe Cap 17 M Pipe Union 2 required 18 M Pipe Nipple 2 required P High Temperature Ignition Lead Connects to item 7; Models through 9/16/ High Voltage Suppression Cable Models starting 9/17/12; Use with Ignition Control Gas Valve N.G.; 50 Hertz Gas Valve L.P.; 50 Hertz 20 M413470P Gas Valve N.G.; 60 Hertz 20 M4883P3 Gas Valve Kit L.P.; 60 Hertz 21 M Spud Holder Manifold End Bracket

68 Gas Heater Components - CE Models Through 3/10/13 TMB3214P_

69 Gas Heater Components - CE Models Through 3/10/13 REF PART NO. DESCRIPTION COMMENTS NA Gas Valve Harness NA M4904P3 Valve Replacement Kit Natural Gas (N.G.); Models through 7/13/09 NA M4905P3 Valve Replacement Kit Liquid Petroleum Gas (L.P.); Models through 7/13/09 NA M4906P3 Valve Replacement Kit N.G.; Models starting 7/14/09 through 11/30/09 NA M4907P3 Valve Replacement Kit L.P.; Models starting 7/14/09 through 11/30/ Screw 2 M Thermostat Cover 3 M Thermostat Models through 10/31/ Thermostat Models starting 11/1/ Stove Limit Harness Bracket P Gas Stove Assembly 6 M412025P Burner 3 required 7 M Burner Shutter 3 required P Spark Electrode Screw 2 required 10 M Stove Gasket Sold per foot; 3 feet required Gas Valve Bracket 2 required Pipe Nipple 2 required 13 M Nipple 4 required Elbow 2 required P High Temperature Ignition Lead Connects to item 8; Models through 9/16/ High Voltage Suppression Cable Models starting 9/17/12; Use with Ignition Control 16 M Pipe Bracket Pipe Cap 18 H Nipple Pipe Tee Pipe Cap Reducing Tee 2 required 22 H Nipple 4 required 23 F Elbow 2 required Pipe Keeper Bracket 4 required 25 M Snap Bushing 2 required P Gas Valve N.G.; 2 required; Use to replace valves starting 12/1/ P Gas Valve L.P.; 2 required; Use to replace valves starting 12/1/ Pipe Nipple 2 required 28 M Pipe Union 29 M Spud Holder Manifold End Bracket 31 H Union 2 required

70 Gas Heater Components - Models Starting 3/11/13 TMB3357P_

71 Gas Heater Components - Models Starting 3/11/13 REF PART NO. DESCRIPTION COMMENTS NA M4578P3 L.P. Gas Conversion Kit Natural Gas (N.G.) to Liquid Petroleum Gas (L.P.); 60 Hertz; Non-CE models starting 2/15/11 NA M4973P3 L.P. Gas Conversion Kit N.G. to L.P.; 50 Hertz; Non-CE models starting 2/15/11 NA P L.P. Valve Conversion Kit Unregulated; N.G. to L.P.; CE models; Must also order orifice, refer to Installation Manual NA P L.P. Conversion Kit Regulated; N.G. to L.P.; CE models; Must also order orifice, refer to Installation Manual NA M Harness Assembly Non-CE and non-australian models NA M Gas Valve Harness Assembly Australian models NA Gas Valve Harness CE models Gas Stove Assembly Pipe Nipple Pipe Bracket Pipe Cap Screw Igniter Cover 7 M412025P Burner 3 required P Spark Electrode Screw 2 required Burner Hole Cover Manifold End Bracket Spud Holder Weldment 13 M Thermostat Cover Stove Limit Harness Bracket Gas Valve N.G.; 50 Hertz; Australian models Gas Valve L.P.; 50 Hertz; Australian models 15 M413470P Gas Valve N.G.; 60 Hertz; Non-CE and non-australian models 15 M4883P3 Gas Valve Kit L.P.; 60 Hertz; Non-CE and non-australian models Gas Valve N.G.; 50 Hertz; CE models Gas Valve L.P.; 50 Hertz; CE models Pipe Nipple 17 M Pipe Union Pipe Nipple Hose Clamp Pipe Elbow Pressure Fitting CE and Australian models Screw P Ignition Control Non-CE and non-australian models P Ignition Control CE models; Australian models through 3/31/13 and starting again 8/1/ Ignition Control Kit Australian models; Models starting 4/1/13 through 7/31/13 24 M Cable Tie High Voltage Suppression Cable Screw Gas Valve Bracket Screw Thermostat Non-CE and non-australian models Thermostat CE and Australian models Snap Bushing

72 Burner Orifices for Non-CE and Non-Australian Gas Models TMB3215P_

73 Burner Orifices for Non-CE and Non-Australian Gas Models REF PART NO. DESCRIPTION COMMENTS 1 M Burner Orifice Natural Gas (N.G.); 0-2,000 feet; Drill no. 16 (4.5 mm); 3 required 1 M Burner Orifice N.G.; 2,001-4,000 feet; Drill no. 18 (4.3 mm); 3 required 1 M Burner Orifice N.G.; 4,001-6,000 feet; Drill no. 19 (4.2 mm); 3 required 1 M Burner Orifice N.G.; 6,001-8,000 feet; Drill no. 20 (4.1 mm); 3 required 1 M Burner Orifice N.G.; 8,001-10,000 feet; Drill no. 23 (3.9 mm); 3 required 1 M Burner Orifice Liquid Petroleum Gas (L.P.); 0-2,000 feet; Drill no. 36 (2.7 mm); 3 required 1 M Burner Orifice L.P.; 2,001-4,000 feet; Drill no. 38 (2.6 mm); 3 required 1 M Burner Orifice L.P.; 4,001-6,000 feet; Drill no. 39 (2.5 mm); 3 required 1 M Burner Orifice L.P.; 6,001-8,000 feet; Drill no. 41 (2.4 mm); 3 required 1 M Burner Orifice L.P.; 8,001-10,000 feet; Drill no. 42 (2.4 mm); 3 required NOTE: For CE gas and orifice information, refer to Installation Manual