0.5 mm Pitch FPC / FFC Connectors

Transcription

1 0.5 mm Pitch FP / FF onnectors FF9 Series OUTLINE The FF9 series is a slider lock connector of the contact pitch 0.5mm. It suits FP/FF of 0.3mm thickness. APPLIATIONS Mobile Phones, Notebook omputers, D-ROM, DVD-ROM, Handheld Devices FEATURES 1. Low profile, 1.8mm in height. 0.5mm pitch 2. Accepts flat flexible cable(ff) and flexible printed circuit(fp) (FP thickness: 0.3mm) 3. Retains FF and FP well. ZIF style(slider style) for excellent durability. 4. High temperature plastic for reflow soldering. (Applicable to lead-free solder temperature profile) 5. Both of upper contact and lower contact available 6. Tape and reel packaging available(2,500ps / REEL) SPEIFIATIONS Rated Voltage 50V A (r.m.s.) Rated urrent 0.5A / contact Dielectric Withstanding Voltage 200V A(rms) for 1 minute Insulation Resistance 100M Ω min. at 500V D ontact Resistance 30m Ω max. MATERIAL/FINISH ontact opper Alloy / Au(Flash) over Ni Plating Housing High Temparature Plastic / (UL94V-0) olor, Black Slider High Temparature Plastic / (UL94V-0) olor, Brown Locking Tab opper Alloy / Sn-Ag over Ni Plating Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated

2 FF9 Series UPPER ONTAT TYPE FF9- A-R11A No. of contact Slider Shape A:Standard Type ontact Plating 1:Au(Flash) over Ni Plateng Dimension No. of P/N ontacts FF9-4A-R11A FF9-5A-R11A FF9-6A-R11A FF9-8A-R11A FF9-9A-R11A FF9-10A-R11A FF9-11A-R11A FF9-12A-R11A FF9-13A-R11A FF9-14A-R11A FF9-16A-R11A FF9-18A-R11A FF9-19A-R11A FF9-20A-R11A FF9-21A-R11A FF9-22A-R11A FF9-24A-R11A FF9-26A-R11A FF9-28A-R11A FF9-30A-R11A FF9-32A-R11A FF9-34A-R11A FF9-35A-R11A FF9-36A-R11A FF9- A-R11B No. of contact Slider Shape B:B Type ontact Plating 1:Au(Flash) over Ni Plateng Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 2

3 FF9 Series LOWER ONTAT TYPE FF9- B-R11A No. of contact Slider Shape A:Standard Type ontact Plating 1:Au(Flash) over Ni Plateng FF9- B-R11B No. of contact Slider Shape B:B Type ontact Plating 1:Au(Flash) over Ni Plateng Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3

4 FF9 Series EMBOSS TAPE DIMENSIONS USER DIRETION OF FEED USER DIRETION OF FEED Tailer: 40 Pockets Min. Empty components pockets sealed with Tailer: cover 40 tape. Pockets Min Pockets Empty components pockets sealed with cover tape. USER FEEDIN DIRETION Leader: 10 Pockets Empty components pockets 2500 Pockets sealed with Leader: cover tape. 10 Pockets Empty components pockets sealed with cover tape. USER Trailer: FEEDIN 40 Pockets DIRETION Min. Empty components pockets sealed with cover tape Pockets USER FEEDIN DIRETION Leader: 10 Pockets Empty components pockets sealed with cover tape. Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 4

5 FF9 Series APPLIABLE FP/FF DIMENSIONS Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 5

6 0.25 mm Pitch Back-lock FP onnector FF10 Series OUTLINE FF10 series is 0.25mm pitch, denpth 4.25mm and 0.95mm connector height. It has both upper and lower contact positions. Applicable FP thickness is 0.15mm. It is suitable for large number of contacts(more than 50 contacts). FEATURE Minimize the winding of the FP on the re-flow process, it can be arrange large number of contacts. Both upper and lower contacts design accepts any FP insertion directions. DDK's original rotate oval cam lock mechanism; "Back-lock" system ensure the reliable connection. Back-lock structure ensures retention from inadvertent upward pulling of the FP. onnectors delivered with the lock lever opened. Time saving for FP inserting operation. Emboss tape and reel package for automatic mounting machine. High temperature resistant resin for lead free reflow process. Note : Please do not close the lock lever without inserting the FP. APPLIATIONS Mobile phone, notebook P, PDA, other Portable devices SPEIFIATIONS Rated Voltage Rated urrent Dielectric Withstand Voltage Insulation Resistance ontact Resistance 50V A (r.m.s.) 0.2A / ontact 200V A (r.m.s.) / 1 minute 50 MΩ min. at 250V D 50m Ω max. MATERIAL/FINISH Item ontact Housing Lock Lever Material / Finish opper Alloy / Au Flash over Ni LP Resin(UL94V-0)/ Black PPS Resin(UL94V-0)/ Brown Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated.

7 FF10 Series 0.25mm Pitch FP onnector FF10- A-R11B Dimensions Odd Number of ontacts 1 Series FF10 2 Number of ontact Refer to table-1 3 ontact Position A:Upper and lower contacts 4 ontact Style R:Right Angle 5 ontact Tail Length 1:0.5mm & 0.8mm 6 ontact Plating 1:Au Flash over Ni 7 Lock Lever Style B:Long lock Even Number of ontacts (4.25) (0.90) (1.85) A B (4.25) (0.90) (1.85) r No.(n) ontact No.(n-1) ontact onnector Location Recommended PB Mounting Dimensions No.2 ontact Odd Number of ontacts (4.35) Table 1 Part Number Number of ontact A B FF10-51A-R11B FF10-70A-R11B FF10-80A-R11B onnector Location No.2 ontact Even Number of ontacts No.n ontact No.2 ontact No.(n-1) ontact No.2 ontact No.(n) ontact ontacts are arranged zigzag from No.1 contact (4.35) No.n ontact Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated

8 tact ontact (4.35) FF10 Series Recommended FP Pattern Dimensions Standard Type FP (4.35) (4.35) No.n ontact No.n ontact No.n ontact No.n ontact (4.35) (4.35) (4.35) B R R B B B B R R R R min. min min, min, min. min min. min B B min. min. heck Stiffener Markk heck Mark B0.05 Upper ontact 2-R Even Number of ontacts Upper ontact 2.00 min, 2.00 min min heck Mark min Stiener Stiener Stiener With heck Mark Type FP B0.05 Odd Number heck Mark of ontacts heck Mark heck Markk heck Mark heck Markk heck Mark Odd Number of ontacts 2-R 0.15 Even Number of ontacts 2-R min heck Mark 0.50 min heck Mark Stiffener No ontact B0.05 Stiffener heck Mark Standard Type FP mating Lower ontact Lower ontact B B R R min. min R min With heck Mark Type FP mating heck Mark heck Mark 1.65 min R R B Specifications and/or dimenssions in this catalogue are subject to change without notice Your catalogue checking the latest speifications with our drawings would be highly appreciated B B min B R min. 2-R

9 FF10 Series Package Specifications Reel Dimensions B TP. TP. D G User direction of feed H mm min. B TP. TP. (1.70) (1.50) Tailer : 30 pockets min. Empty components pockets sealed with cover tape. d Emboss Tape Dimensions R A A Type 2 f H 3,000 pockets User direction of feed d d d (16.00) TP. EH 1.75 EH F G0.30 Leader :15 pockets min. Empty components pockets sealed with cover tape. F0.10 G0.30 (1.70) (1.70) F Tailer : 30 pockets min. Empty components pockets sealed with cover tape. 3,000 po User directio Section f f f g Section g g g 2.30TP. R 0.75 R 0.75 (1.50) max. Detail elongation and skew of sprocket hole Part Number Number of ontact A B D E F G H FF10-51A-R11B FF10-70A-R11B FF10-80A-R11B Emboss Type Type 2 Quantity:3,000pcs./reel Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 4

10 0.3 mm Pitch Back-lock FP onnectors FF12 Series OUTLINE The FF12 series has a back-lock mechanism connector with a 0.3mm contact pitch. It fits 0.15mm thick FPs and has upper and lower contacts, but the connector height has a low profile of 0.9mm, making the PB mounting space the smallest in the market. APPLIATIONS Mobile Phone, Digital amera, MP3 Player, Portable P, PDA and other Portable Device FEATURE With the upper and lower contacts design, all FP insertion directions are available. DDK's original cam-type "Back-lock" system ensures reliable operation. Even if the FP is pulled upward, the lock will not open. onnectors are delivered unlocked, so the lock lever does not need to be opened before operation. Supplied with emboss tape for automatic mounting. The housing and lock lever are made of heat-resistant resin making possible lead free reflow soldering. SPEIFIATIONS Rated Voltage 50V A(r.m.s.) Rated urrent 0.2A / ontact Dielectric Withstanding Voltage 200V A (r.m.s.) / 1 minute Insulation Resistance 50 MΩ (min.) at 250V D ontact Resistance 50m Ω (max.) MATERIAL//FINISH ontact opper Alloy / Au(Flash) over Ni Plating Housing LP Resin (UL94V-0) / Ivory Lock Lever PPS Resin (UL94V-0) / Black aution: Regarding the handling this connector, please refer to the attached instruction manual Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated.

11 FF12 Series Short Lock Type FF12- A-R11AL Number of ontact Lock Lever Type A: Short Lock Part Number Number of ontact A B D FF12-8A-R11AL FF12-10A-R11AL FF12-12A-R11AL 12 5, A B (4.23) (0.47) (1.37) FF12-13A-R11AL FF12-17A-R11AL FF12-18A-R11AL FF12-21A-R11AL FF12-22A-R11AL FF12-23A-R11AL ontact No.1 FF12-25A-R11AL , FF12-27A-R11AL FF12-29A-R11AL FF12-32A-R11AL FF12-34A-R11AL FF12-35A-R11AL FF12-39A-R11AL Long Lock Type ontact No FF12- A-R11BL A B Number of ontact Lock Lever Type B : Long Lock (4.93) (1.17) (2.07) Part Number Number of ontact A B D FF12-6A-R11BL FF12-8A-R11BL FF12-10A-R11BL FF12-12A-R11BL FF12-13A-R11BL FF12-17A-R11BL FF12-18A-R11BL FF12-21A-R11BL FF12-22A-R11BL FF12-23A-R11BL FF12-25A-R11BL FF12-26A-R11BL FF12-27A-R11BL FF12-29A-R11BL FF12-31A-R11BL FF12-32A-R11BL FF12-34A-R11BL FF12-35A-R11BL FF12-37A-R11BL FF12-39A-R11BL FF12-40A-R11BL FF12-45A-R11BL FF12-51A-R11BL FF12-55A-R11BL FF12-60A-R11BL FF12-65A-R11BL Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 2

12 FF12 Series FF12 Series Mounting Dimensions PB Mounting Dimensions Recommended FP Dimensions For Odd Number of ontact Regarding dimension, please refer to the table on page 2. Upper Lower ontact For Even Number of ontact Upper ontact Upper ontact Lower ontact Lower ontact Regarding dimensions and D, please refer to the table on page 2. Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3

13 FF12 Series Package Specifications 3 Reel Dimensions A B FF12- -A-R11 L Number of ontact Lock Lever Type A : Short Lock B:Long Lock φ328 φ80 USER DIRETION OF FEED 400mm (min.) Emboss Tape Dimensions Tailer :40 Pockets (min.) Empty components pockets sealed with cover tape. Short Lock:2500Pockets Long Lock : 2000Pockets Leader :10Pockets Empty components pockets sealed with cover tape. Type 1 Type D E H H F0.30 G F D SETION A-A SETION A-A SETION B-B Short Lock:1.87(Typ.) Long Lock: 2.57(Typ.) SETION B-B Short Lock: 1.,87(Typ.) Long Lock:2.57(Typ.) Part Number Number of ontact A B D E F G H Emboss Type Package Quantity Part Number Number of ontact A B D E F G H Emboss Type Package Quantity FF12-8A-R11AL FF12-6A-R11BL FF12-10A-R11AL FF12-8A-R11BL FF12-12A-R11AL FF12-10A-R11BL FF12-13A-R11AL FF12-12A-R11BL FF12-17A-R11AL FF12-13A-R11BL FF12-18A-R11AL ー 24.0 FF12-21A-R11AL FF12-22A-R11AL FF12-23A-R11AL Type pcs. /Reel FF12-17A-R11BL FF12-18A-R11BL ー 24.0 FF12-21A-R11BL FF12-22A-R11BL Type 1 FF12-25A-R11AL FF12-23A-R11BL FF12-27A-R11AL FF12-25A-R11BL FF12-29A-R11AL FF12-26A-R11BL FF12-32A-R11AL FF12-27A-R11BL pcs. FF12-35A-R11AL Type 2 FF12-29A-R11BL /Reel FF12-39A-R11AL FF12-31A-R11BL FF12-32A-R11BL FF12-34A-R11BL FF12-35A-R11BL FF12-37A-R11BL FF12-39A-R11BL FF12-40A-R11BL Type 2 FF12-45A-R11BL FF12-51A-R11BL FF12-55A-R11BL FF12-60A-R11BL FF12-65A-R11BL Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 4

14 FF12 Series Recommended Reflow Temperature Profiles for Leaded Solder Paste for Lead Free Solder Paste aution This reflow temperature profile is for your reference. It might be changed the temperature condition depend on the solder paste, volumne and flax. Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 5

15 0.5mm Pitch Back-lock FP onnectors FF14 Series OUTLINE The FF14 series has a back-lock mechanism connector with a 0.5mm contact pitch. It fits 0.2mm or 0.12mm thick FPs and has upper and lower contacts, but the connector height has a low profile of 0.9mm, making the PB mounting space the smallest in the market. APPLIATIONS Mobile Phone, Digital amera, MP3 Player, Portable P, PDA, other Portable Devices FEATURE With the upper and lower contacts design, all FP insertion directions are available. DDK's original cam-type "Back-lock" system ensures reliable operation. Even if the FP is pulled upward, the lock will not open. onnectors are delivered unlocked, so the lock lever does not need to be opened before operation. Supplied with emboss tape for automatic mounting. The housing and lock lever are made of heat-resistant resin making possible lead free reflow soldering. SPEIFIATIONS Rated Voltage 50V A (r.m.s.) Rated urrent Dielectric Withstanding Voltage Insulation Resistance ontact Resistance 0.5A / contact 200V A (r.m.s.) / 1 minute 100 MΩ (min,) at 500V D 50m Ω (max.) MATERIAL/FINISH ontact opper Alloy / Au(Flash) over Nickel Plating Housing Lock Lever LP Resin (UL94V-0) / Ivory PPS Resin (UL94V-0) / Black aution : Regarding the handling this connector, please refer to the attached instruction manual Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated.

16 FF14 Series Unit : mm Short Lock Type FF14- -R11A Number of ontact Applicable FP Thickness A:0.20±0.03 :0.12±0.03 Lock Lever Type A: Short Lock Part Number Number of ontact A B D E FF14-4 -R11A FF R11A FF R11A FF R11A FF R11A FF R11A FF R11A FF R11A Long Lock Type FF14- -R11B Number of ontact Applicable FP Thickness A:0.20±0.03 :0.12±0.03 Lock Lever Type B: long Lock Type Part Number Number of ontact A B D E FF14-4 -R11B FF14-8 -R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B FF R11B Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 2

17 FF14 Series FF14 Mounting Dimensions FP Mounting Dimensions Recommended FP Dimensions Regarding dimensions and D, please refer to the table on page 2. FF14 - A - R11 FF R11 Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. Regarding dimensions and E, please refer to the table on page 2. 3

18 FF14 Series Package Specifications Reel Dimensions 3 Unit : mm FF R11 Number of ontact Applicable FP Thickness A:0.20±0.03 :0.12±0.03 A B Lock Lever Type A : Short Lock B * Long Lock φ328 φ80 USER DIRETIN F FEED 400mm (min.) Emboss Tape Dimensions Short Lock:2500Pockets Tailer :40 Pockets (min.) Long Lock : 2000Pockets Leader :10Pockets Empty components pockets Empty components pockets sealed with cover tape. sealed with cover tape. Type 1 Type ± H ± H F±0.30 G E F± D 1.75 D SETIN A-A SETIN A-A SETIN B-B Short Lock:1.87(Typ.) Long Lock: 2.57(Typ.) SETIN B-B Short Lock: 1.,87(Typ.) Long Lock:2.57(Typ.) Part Number Number of ontact A B D E F G H Emboss Type Package Quantity FF14-4 -R FF14-8 -R FF R FF R ーーー FF R Type 1 FF R FF R FF R FF R FF R Short Lock: 2500pcs./Reel FF R FF R FF R Long Lock: 2000pcs./Reel FF R FF R Type 2 FF R FF R FF R FF R FF R FF R Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 4

19 FF14 Series Recommended Reflow Temperature Profiles for Leaded Solder Paste for Lead Free Solder Paste aution This reflow temperature profile is for your reference. It might be changed the temperature condition depend on the solder paste, volumne and flax. Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 5

20 0.5mm Pitch FP/FF/Membrane FF14A Series able Lock Type OUTLINE FF14A series is a 0.9mm height connector with a cable lock mechanism, in conformity to FP of 0.5mm pitch and 0.2mm thick. Applicable cable is 0.2mm thick FP, FF and membrane. APPLIATIONS Tablet P, Notebook P, PDA, Digital amera and other portable devices FEATURE FP, FF and membrane are mateable. With the upper and lower contacts design, all FP insertion directions are availavle. DDK's original cam-type "Back-lock" system ensures reliable operation. DDK's cable lock mechanism provides positive retention of the FP. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. onnectors deliver with the lock lever opened. Time saving for FP inserting operation. Tape and reel package for automatic mounting machine. High temperature resistant resin for lead free reflow process. Nickel barrier prevents solder wicking. SPEIFIATIONS Rated Voltage 50V A(r.m.s.) Rated urrent 0.5A / ontact Dielectric Withstand Voltage 200V A(r.m.s.) / 1 minute Insulation Resistance 100 MΩ min. at 500V D ontact Resistance 50m Ω max. MATERIAL/FINISH Item Material / Finish ontact opper Alloy /Au(Flash) over Ni Plating Housing LP Resin (UL94V-0)/ Black Lock Lever PPS Resin(UL94V-0)/ Black Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings.

21 FF14A Series FP/FF/Membrane Type FF14A - -R11DL-B-3H Series FF14A 2 Number of ontact Please refer to Table 1 :Upper and Lower ontact 3 ontact Position Effective mating depth :1.15mm 4 ontact Style R:Right Angle 5 ontact Tail Length 1:0.8mm 6 ontact Plating 1:Au(Flash) over Ni plating 7 Lock Lever Style D:MIddle Lock Type 8 Nickel Barrier 1:Including 9 Housing olor B:Black 10 Halogen Free 3H:Halogen free A B D0.10 Y (4.43) (0.71) (1.61) No.1 contact able lock tab No.n contact able lock tab Y D 0.80 Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. Table1 Part Number 2 Number of ontact A B D E FF14A - 4- R11DL-B-3H FF14A R11DL-B-3H FF14A R11DL-B-3H FF14A -14 -R11DL-B-3H FF14A -16 -R11DL-B-3H FF14A -18 -R11DL-B-3H , FF14A -20 -R11DL-B-3H FF14A -26 -R11DL-B-3H FF14A -30 -R11DL-B-3H

22 FF14A Series FP/FF/Membrane Type Recommennded PB Mounting Dimensions 0.20 onnector Location D No.n ontact (4.30) Recommended Membrane, FP and FF Dimensions Please refer to dimensions of and D of Table Ag pattern D0.05 arbon coating No.n contact when using at upper side No.1 contact when using at lower side E0.10 No.1 contact when using at upper side No.n contact when using at lower side (FP only) Au plating No.n contact when using at upper side No.1 contact when using at lower side D0.05 E No.1 contact when using at upper side No.n contact when using at lower side Please refer to dimensionsof E and F of Table 1. Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 3

23 4.00 d 1.87 TYP E0.10 d c FF14A Series 1.7 E0 B TYP. TYP. Packing Specifications Reel Dimensions G0.30 B TYP. A Section c-c f TYP. Section d-d d 1.87 TYP. G E0.10 F G0.30 D d 4.00 Section f-f f g g TYP. User dimension of feed 1.75 E0.10 F G0.30 Section g-g 400mm min. g-g g 1.87 TYP. Tailer: 40 pockets min. Empty components pockets sealed with cover tape. 2,500 pockets Leader:10 pockets min. Empty components pockets sealed with cover tape. A c E0.10 G0.30 User direction of feed Tape and Reel Dimensions Section c-c c d d 1.87 TYP. c Type 1 Type f Section d-d A 1.75 E0.10 G0.30 B TYP. TYP. F 1.75 E0.10 G0.30 Section c-c f c d Part Number Section d-d Number of ontact FF14A-4-R11DL-B-3H FF14A-5-R11DL-B-3H FF14A-6-R11DL-B-3H FF14A-14-R11DL-B-3H FF14A-16-R11DL-B-3H Section f-f FF14A-18-R11DL-B-3H f g g FF14A-20-R11DL-B-3H FF14A-26-R11DL-B-3H FF14A-30-R11DL-B-3H Section g-g Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. d TYP TYP. A B D E F G 1.75 E0.10 F G0.30 Section f-f f g g Tape and Reel ー 24.0 Type Quantity 2,500 pockets 2,500pcs./Reel Type 2 User direction of feed 80 Tailer:40 pockets min. Empty components pockets sealed with cover tape. Section g-g 1.87 TYP. User dimen 400m Leader:10 pockets min Empty components pock sealed with cover tape mm min.

24 FF14A Series Recommended Reflow Temperature profiles for Leaded Solder Paste for Lead Free Solder Paste Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. aution This reflow temperature profiles are reference. It may be changed the condition depend on the type of solder paste, amount of solder and flux. Therefore, this profile does not gualantee your soldering. 5

25 FF14A Series Umit:mm Operating Instruction and autions 1.onnector mounting Instruction Lock lever is opened when delivery. onnectors are delivered with a lock lever opened. You do not have to operate the lock lever before inserting FP. (picture 1 ) Please do not re-flow with the lock lever opened. Please close the lock-lever with inserting FP, otherwise the contact gap become narrower and FP insertion force will rise. (picture 2 ) Please do not load from the top of the lock lever. (figure 1 ) And please do not load toward the opposite direction of the lock lever, (figure 2 ) otherwise the lock lever may be broken or contacts may be deformed. picture 1 picture 2 figure 1 figure 2 2.FP Insertion Please insert FP to the pattern side up.(picture 3 ) when using upper contacts. Please insert FP to the stiffener side up(picture 4 ) when using lower contacts. Please insert FP straight to the connector. Due to the semi-reteining mechanism, some insertion force is necessary when inserting FP. Please make sure whether FP is inserted fully. Pattern side Stiffener side picture 3 Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. picture 4 6

26 FF14A Series Umit mm Operating Instruction and autions 3 orrect FP Insertion Position 3-1.Upper ontact As illustrated (picture ⑤ ), you can check short insertion(picture ⑥ ) and diagonal OK 0.10mm 0.10mm MAX. MAX. 0.10mm MAX. insertion(picture ⑦ ) by checking the position of connector housing and FP positioning edge. picture ⑤ NG picture ⑦ picture ⑥ orrect insertion 写真55正常挿入状態 正常挿入状態 OK 写真 5 正常挿入状態 OK 写真 OK NG Short insertion 写真 浅め挿入状態 NG 写真 6 写真 浅め挿入状態 NG 66 浅め挿入状態 NG Diagonal insertion 写真77斜め挿入状態 斜め挿入状態 NG 写真 7 斜め挿入状態 NG 写真 NG 3-2 Lower ontact As illustrated (picture ⑧ and ⑨ ), if the FP positioning edge is exposed from the connector housing, it may be short insertion or diagonal insertion. Please re-insert FP fully. And draw the line parallel to FP. Then you can check the short insertion same as illustration 3-1. OK NG picture ⑧ picture ⑨ orrect insertion Diagonal insertion 正常挿入状態 Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 7

27 FF14A Series Umit:mm Operating Instruction and autions 4.losing Lock Lever Please rotate down the lock lever until firmly closed. (picture 10 ) Please do not load excessive force on the housing(picture 11 ) OK NG picture 10 picture 11 Please do not close the lock lever by tip of a nail.(picture 12 ) It may cause breakage of the lock lever. When you close the lock lever, please hold more than 5mm width.(picture 13 ) NG NG 5.Removing FP picture 12 picture 13 Please lift the lock lever like flipping up in the direction of arrow.(picture 14 ) Please do not load excessive force on the lock lever.(picture 15 ) When operating the lock lever, please make sure to not catch to the connector housing. It may cause breakage of the housing. OK NG picture 14 picture 15 6.ESD (Electrostatic Discharge) This connector is not taken ESD measure. Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 8

28 0.4mm Pitch Ultra-low Profile FP Back-lock onnector Upper ontact FF18 Series OUTLINE FF18 series is 0.4mm pitch, denpth 3.50mm and 0.66mm connector height. And cable lock mechanism reinforce the retaining force of FP by cable lock tabs on both ends of the contact. It is achieved both ultra-low profile and high retaining force. And mounting space is the smallest. FEATURE DDK's original rotate oval cam lock mechanism; "Back-lock" system ensure the reliable connection. DDK's cable lock mechanism provides positive retention of the FP. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. onnectors deliver with the lock lever opened. Time saving for FP inserting operation. High-temperature resin for lead free reflow prosess. Tape and reel package for automatic mounting machine. Note : Please do not close the lock lever without inserting the FP. Since cable lock tabs electrify next contacts, please do not use the cable lock tabs as ground tabs. APPLIATIONS Mobile phone, notebook P, PDA, other Portable devices SPEIFIATIONS Rated Voltage Rated urrent Dielectric Withstand Voltage Insulation Resistance ontact Resistance 50V A (r.m.s.) 0.4A / ontact 200V A (r.m.s.) / 1 minute 100 MΩ min. at 500V D 50m Ω max. MATERIAL/FINISH Item onatct Housing Lock lever Material / Finish opper Alloy / Au (Flash) over Ni LP Resin (UL94V-0) / Ivory PPS Resin (UL94V-0) / Black Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated.

29 FF18 Series 0.4 mm Pitch FP Back-lock onnector FF18- A-R11A Series FF18 2 Number of ontact Refer to th table 1 3 ontact Position A:Upper ontact Applicable PB Thickness:0.12±0.03mm 4 ontact Style R:Right Angle 5 ontact Tail Length 1:0.40mm 6 ontact Plating 1:Au (Flash) over Ni 7 Lock Lever Style A:Standard Dimensions Recommended PB Mounting Dimensions Recommended FP Dimensions Table 1 Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. Part Number Number of ontact A B D E FF18-4A-R11A FF18-5A-R11A FF18-6A-R11A FF18-7A-R11A FF18-8A-R11A FF18-9A-R11A FF18-10A-R11A

30 FF18 Series Package Specifications Reel Dimensions Emboss Tape Dimensions Quantity:4000pcs./reel Part Number Number of ontacts FF18-4A-R11A FF18-5A-R11A FF18-6A-R11A FF18-7A-R11A FF18-8A-R11A FF18-9A-R11A FF18-10A-R11A A Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3

31 FF18 Series Umit:mm Operating Instruction and autions 1.onnector mounting Instruction onnectors are delivered with a lock lever opened. You do not have to operate the lock lever before inserting FP. (picture 1 ) Lock lever is opened when delivery. picture 1 Please do not re-flow with the lock lever closed condtion. Please close the lock-lever with inserting FP, otherwise the contact gap become narrower and FP insertion force will rise. (picture 2 ) picture 2 Please do not load (0.5N pin Min.) from the top of the lock lever. (figure1 ) And please do not load (0.5N pin Min) toward the opposite direction of the lock lever, (figure 2 ) otherwise the lock lever may be broken or contacts may be deformed. 0.5N pin Min 0.5N pin Min figure 1 figure 2 While FP mated with connector, cable lock tabs conduct to both ends of contacts. Please do not ground the cable lock tab pad on the mounting board.(figure: 3) Please do NOT ground able Lock Tab pad able Lock Tab ontact ontact pad onnector P..B (mounting side) FP figure 3 Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 4

32 FF18 Series Umit:mm Operating Instruction and autions 2.FP Insertion Please insert FP to the pattern side up.(picture 34 ) Please insert FP straight to the connector. Due to the semi-reteining mechanism, some insertion force is necessary when inserting FP. Please make sure whether FP is inserted fully. Pattern side Stiffener side NG picture 3 picture 4 3.orrect FP Insertion Position As illustrated (picture 5 ), you can check short insertion(picture 6 ) and diagonal insertion(picture 7 ) by checking the position of connector housing and FP positioning edge. If the FP positioning edge is exposed from the connector housing, it may be short insertion or diagonal insertion. Please re-insert FP fully. FP edge OK NG NG picture 5 orrect insertion picture 6 Short insertion picture 7 Diagonal insertion Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 5

33 FF18 Series Umit:mm Operating Instruction and autions 4.losing Lock Lever Please rotate down the lock lever until firmly closed. (picture 8 ) Please do not load excessive force(3n Min) on the housing(picture 9 ) and please do not close the lock lever by tip of a nail.(picture 10 ) It may cause breakage of the lock lever. OK NG NG 3N Min picture 8 picture 9 Picture 10 5.Removing FP Please lift the lock lever like flipping up in the direction of arrow.(picture 11 ) Please do not load excessive force (0.5N pin Min.) on the lock lever.(picture 12 ) When operating the lock lever, please make sure to not catch to the connector housing. It may cause breakage of the housing (figure 4 ). OK NG 0.5N pin Min NG picture 11 picture 12 figure 4 6.ESD (Electrostatic Discharge) This cinnector is not taken ESD measure. 7.Disposal of onnector Please dispose the connector as industrial waste. Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 6

34 0.4 mm Pitch Ultra-low Profile FP onnector FF18N Series Upper and lower Type DDK Ltd. OUTLINE FF18N series is a connector with a cable lock mechanism, in conformity to FP of 0.4mm pitch and 0.12mm thick. In spite of the fact that connector height is 0.66mm, an ultra-low profile, it has both upper and lower contacts. FEATURE With the upper and lower contacts design, all FP insertion directions are availavle. DDK's original cam-type "Back-lock" system ensures reliable operation. DDK's cable lock mechanism provides positive retention of the FP. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. onnectors deliver with the lock lever opened. Time saving for FP inserting operation. Tape and reel package for automatic mounting machine. High temperature resistant resin for lead free reflow process. Nickel barrier prevents solder wicking. Note : Please do not close the lock lever without inserting the FP. Since cable lock tabs electrify next contacts, please do not use the cable lock tabs as ground tabs. APPLIATIONS Touch panel, LD back-light, camera modules, side-key connections and other accessories SPEIFIATIONS Rated Voltage 50V A(r.m.s.) Rated urrent 0.4A / ontact Dielectric Withstand Voltage 200V A(r.m.s.) / 1 minute Insulation Resistance 100 MΩ min. at 500V D ontact Resistance 50m Ω max. Durability 10 ycles Operating Temperature Range MATERIAL/FINISH Item Material / Finish ontact opper Alloy /Au(Flash) over Ni Plating Housing LP Resin (UL94V-0)/ Ivory Lock Lever PPS Resin(UL94V-0)/ Black Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings.

35 FF18N Series Ultra-low profile connectors Upper and lower Type FF18N- A-R11A-3H Series FF18N 2 Number of ontact See Table-1 3 ontact Position A:Upper and lower FP Thickness:0.12±0.03mm 4 ontact Style 5A ontact Pich 6 ontact Plating D±0.0 7 Slider Form a 8 Material b R:Right Angle 1:0.40mm 1:Au (Flash) over Ni Plataing A:Standard Type H : Halogen Free (0.0 max.) (1.39) 0.40± Dimensions D B 0.12± ± ± ± (0.10) (0.40 min.) No contact b a 0.15 A D± B a b 0.45 D ± ±0.03 D b a ± (FP position) 0.50± ± ± (3.35) Section a-a (FP position) 1.00 Section 1.30b-b Section a-a (0.0 max.) Section b-b (1.39) Recommended P..B Pattern lay-out and metal mask Dimension 0.25± (0.10) (0.40 min.) No.1 contact Applicable FP Dimension 0.45±0.05 R ± ± ± D±0.03 E±0.05 D 0.23± ± ± ± ± ± ± ± ±0.05 (3.35) Stiffener (2.50 min.) 0.12±0.30 Table-1 Number of Part Number A B D E ontact FF18N- 4A-R11A-3H FF18N- 5A-R11A-3H FF18N- 6A-R11A-3H Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 2

36 FF18N Series Packing Specifications Reel Dimensions User Direction of Feed User Direction of Feed Leader: Tailer:30 pockets min pockets 15 pockets min. Leader: Empty components pockets Tailer:30 pockets min. Empty components pockets 4000 pockets 15 pockets min. sealed with cover tape. sealed with cover tape. Empty components pockets sealed with cover tape. Empty components pockets sealed with cover tape. User Direction of Feed User Direction of Feed Emboss Tape Dimensions A A ± ±0.3 (1.84) Section - (1.84) Section - B B B 3.40 Section B-B Section (1.84) B-B B 3.40 (1.84) Part Number Number of ontact FF18N- 4A-R11A-3H A FF18N- 5A-R11A-3H FF18N- 6A-R11A-3H Quantity:4000pcs. / Reel Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 3

37 FF18N Series Umit:mm Operating Instruction and autions 1.onnector mounting Instruction onnectors are delivered with a lock lever opened. You do not have to operate the lock lever before inserting FP. (picture 1 ) Lock lever is opened, delivered. picture 1 Please do not re-flow with the lock lever closed condtion. Please close the lock-lever with inserting FP, otherwise the contact gap become narrower and FP insertion force will rise. (picture 2 ) Please do not load (0.5N pin Min.) from the top of the lock lever. (figure 1 ) And please do not load (0.5N pin Min) toward the opposite direction of the lock lever, (figure 2 ) otherwise the lock lever may be broken or contacts may be deformed. picture 2 figure 1 figure 2 While FP mated with connector, cable lock tabs conduct to both ends of contacts. Please do not ground the cable lock tab pad on the mounting board.(figure: 3) Please do NOT ground able Lock Tab pad able Lock Tab ontact ontact pad onnector P..B (mounting side) FP figure 3 Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 4

38 FF18N Series Umit:mm Operating Instruction and autions 2.FP Insertion Please insert FP to the pattern side up.(picture 3 ) when using upper contacts. Please insert FP to the stiffener side up(picture 4 ) when using lower contacts. Please insert FP straight to the connector. Due to the semi-reteining mechanism, some insertion force is necessary when inserting FP. Please make sure whether FP is inserted fully. Pattern side OK Stiffener side OK picture 3 picture 4 3.orrect FP Insertion Position As illustrated (picture 5 ), you can check short insertion(picture 6 ) and diagonal insertion(picture 7 ) by checking the position of connector housing and FP positioning edge. If the FP positioning edge is exposed from the connector housing, it may be short insertion or diagonal insertion. Please re-insert FP fully. FP Edge OK NG NG picture 5 orrect insertion picture 6 Short insertion picture 7 Diagonal insertion Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 5

39 FF18N Series Umit:mm Operating Instruction and autions 4.losing Lock Lever Please rotate down the lock lever until firmly closed. (picture 8 ) Please do not load excessive force(3n Min) on the housing(picture 9 ) and please do not close the lock lever by tip of a nail.(picture 10 ) It may cause breakage of the lock lever. OK NG NG picture 8 picture 9 Picture 10 5.Removing FP Please lift the lock lever like flipping up in the direction of arrow.(picture 11 ) Please do not load excessive force (0.5N pin Min.) on the lock lever.(picture 12 ) OK NG 0.5N pin Min. picture 11 picture 12 6.ESD (Electrostatic Discharge) This cinnector is not taken ESD measure. 7.Disposal of onnector Please dispose the connector as industrial waste. Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 6

40 Serial ATA Revision 3.0 /LIF-SATA ompliant onnectors FF19ST Series DDK Ltd. OUTLINE FF19ST series a FP connector conforming to SATA specification (Serial ATA Revision 3.0/LIF-SATA). It has 0.5mm pitch, 24 contcts FP connector which is mounted on 1.8 inch HDD and other devices. FEATURE Front-access back lock design is short depth and suitable to compact device. It is mounted on edge of PB as right photo. It has the locator pins and both upper and lower contacts. DDK's cable lock mechanism provides positive retention of the FP. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. onnectors delivered with the lock lever opened. Time saving for FP inserting operation. Nickel barrier prevents solder wicking. Halogen free APPLIATIONS Mobile HDD, Notebook P, Tablet P and other portable devices SPEIFIATIONS Rated Voltage 50V A(r.m.s.) Rated urrent 0.5A / ontact Dielectric Withstand Voltage 200V A(r.m.s.) / 1 Minute Insulation Resistance 100 M Ω min. as 500V D ontact Resistance 50m Ω max. Operating Temperature 55 to + 85 Durability 20 ycles MATERIAL / FINISH Item Material / Finish ontact opper Alloy / Au(Flash) over Ni Plating Locking Tab opper Alloy / Au(Flash) over Ni Plating Housing LP Resin(UL94V-0)/ Ivory Lock Lever PPS Resin(UL94V-0)/ Black Specifications and/or dimensions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated.

41 FF19ST Series 0.50mm Pitch FP onnector FF19ST- 24 B-R11BP-3H Dimensions 1 Series Name FF19ST 2 Number of ontact 24 ontacts 3 ontact Position B:Dual ontact Applicable FP Thickness:0.20±0.03mm 4 ontact Style R:Right Angle 5 Mounting Style 1:Embedded Type 6 ontact Plating 1:Au (Flash) over Ni Plating 7 Lock Lever Type B:With ablelock Type 8 Presence of Positioning-pin P:With Positioning-pin 9 Material 3H:Halogen Free 20.80± ± ± ± ± ±0.03 (24) 0.90± ±0.05 (80.00) 0.9± ± ±0.10 (2.71) 1.20± ± ± ±0.15 Section A-A 1.54± ± ±0.03 A B 0.55± ± ± ±0.05 (2) A B 0.15±0.03 (24) 0.70± ± ± ± No.24 ontact 0.45±0.05 Section B-B 0.80±0.15 Specifications and/or dimensions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 2

42 FF19ST Series 0.50mm Pitch FP onnector Applicable P..B. Dimension 19.80± ± ± ± ±0.03(24) R0.50± ± ± ± ± ±0.10 (0.30) ± Applicable P..B. Dimension Applicable FP Dimension 0.80 R0.2±0.05(4) R0.20±0.05(2) 0.70±0.05(2) 0.10 enterline of Datum ±0.10 (0.30) 1.00±0.10 R0.2±0.05(4) 1.40± ±0.03(24) ± ± ±0.03(24) max. Stiener 0.20± R0.50± ± ± ± ± ± ± ±0.05(2) ±0.05 Applicable FP Dimension Recommended plating of FP :Heat-hardened adhesive Recommended Adhesi ve :Gold over Nickel plating Specifications and/or dimensions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3

43 FF19ST Series Packing Specifications Reel Dimensions 50.4 TP TP TP TP USER DIRETION OF FEED USER DIRETION OF FEED 400 mmmin. 400 mmmin. Tailer Pockets (Min.) 2000 Pockets Leader 10Pockets Empty components pockets Empty components pockets sealed sealed eith eith cover tape. sealed eith eith cover tape. tape. USER DIRETION OF FEED Emboss Tape Dimensions E D 2.00± ± ± ± ± ±0.30 B B Section D-D Section E-E D E TP. 1.45TP. 3.0TP TP. Section B-B Section - Quantity:2000pcs. / Reel Specifications and/or dimensions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 4

44 0.3 mm Pitch Ultra Low Profile FP Back Lock onnector FF20 Series OUTLINE FF20 series is 0.3mm pitch, depth 3.80mm, and 0.66mm connector height. Ultra low profile FP connector. FEATURE DDK's original rotate oval cam lock mechanism; "Back-lock" system ensure the reliable connection. ontact position is upper contact. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. onnectors delivered with the lock lever opened. Time saving for FP inserting operation. Nickel barrier prevents solder wicking. Please do not close a lock lever without inserting FP. APPLIATIONS Mobile Phone, Portable P, PDA and other Portable Device SPEIFIATIONS Rated Voltage 50V A(r.m.s.) Rated urrent 0.2A / ontact Dielectric Withstand Voltage 200V A (r.m.s.) / 1 minute Insulation Resistance 50 MΩ (min.) at 250V D ontact Resistance 50m Ω (max.) MATERIAL//FINISH Item ontact Housing Lock Lever Material / Finish opper Alloy / Au(Flash) over Ni Plating LP Resin (UL94V-0) / Black PPS Resin (UL94V-0) / Brown Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings

45 FF20 Series Ultra Low Profile Back Lock onnector Part Number FF20- A-R11A Odd Number of ontact 1 Series FF20 2 Number of ontact Please refer to table-1 3 ontact Position A:Upper ontact 4 ontact Style R:Right Angle 5 ontact Tail Length 1:0.45mm 6 ontact Plating 1:Au (Flash) over Ni Plating 7 Lock Lever Style A:Standard A B max. (1.39) No.(n) ontact B No.(n) ontact (FP position) Odd Number of ontact Even Number of ontact No.2 ontact No.(n-1) ontact Even Number of ontact A B max. (1.39) No.(n) ontact 0.60 B No.(n-1) ontact No.2 ontact No.(n) ontact Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 2

46 FF20 Series Ultra Low Profile Back Lock onnector Odd Number of ontact Even Number of ontact Recommended PB Mounting Dimensions No.(n-1) ontact No.(n) ontact (0.10) No.2 ontact onnector Location Mating side Lock Lever No.(n-1) ontact B 0.03 No.(n) ontact Recommended FP Dimensions No.2 ontact D B onnector Location (0.10) No.2 ontact onnector Location Mating side Mating side B (0.10) B min Lock Lever No.(n-1) ontact 0.50 min. (3.65) Lock Lever No.(n) ontact No.(n) ontact min. Stiffener No.(n) ontact No.(n-1) ontact (3.65) (3.65) Lock Lever No.2 ontact No.(n) ontact onnector Location D B (0.10) B Mating side D 0.05 B min min No.(n-1) 0.03 ontact No.(n) ontact min min No.(n) ontact min. (3.65) Stiffener min. Stiffener 1.40 No.(n) ontact No.(n-1) ontact (3.65) D B Table-1 Part Number 1.50 min min. Number 0.10 of 0.03 ontact 0.10 A B D min. * Regarding the number of contact, please contact our sales. Stiffener FF20-8A-R11A , No.(n) ontact FF20-12A-R11A FF20-17A-R11A FF20-20A-R11A FF20-24A-R11A FF20-25A-R11A FF20-35A-R11A FF20-39A-R11A Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 3

47 FF20 Series Operating Instruction and autions 1.onnector mounting Instruction Lock lever is opened when delivery. onnectors are delivered with a lock lever opened. You do not have to operate the lock lever before inserting FP. (picture 1 ) Please do not re-flow with the lock lever closed condtion. Please close the lock-lever with inserting FP, otherwise the contact gap become narrower and FP insertion force will rise. (picture 2 ) picture 1 Please do not load (0.3N pin Min.) from the top of the lock lever. (figure1 ) And please do not load (0.3N pin Min) toward the opposite direction of the lock lever, (figure 2 ) otherwise the lock lever may be broken or contacts may be deformed. 0.3N pin Min. 0.3N pin Min. figure 1 figure 2 2.FP Insertion Please insert FP to the pattern side up.(picture 34 ) Please insert FP straight to the connector. Due to the semi-reteining mechanism, some insertion force is necessary when inserting FP. Please make sure whether FP is inserted fully. Pattern side Stiffener side NG picture 2 picture 3 Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 4

48 FF20 Series Operating Instruction and autions 3 orrect FP Insertion Position As illustrated (picture ④ ), you can check short insertion(picture ⑤ ) and diagonal insertion(picture ⑥ ) by checking the position of connector housing and FP positioning edge. If the FP positioning edge is exposed from the connector housing, it may be short insertion or diagonal insertion. Please re-insert FP fully. NG NG 2 Max. 0.1mm Max. OK picture ④ picture ⑤ picture ⑥ orrect insertion Short insertion Diagonal insertion 4 losing Lock Lever Please rotate down the lock lever until firmly closed. (picture ⑦ ) Please do not load excessive force(3n Min) on the housing(picture ⑧ ) NG OK picture ⑦ 3N Max. picture ⑧ Please do not close the lock lever by tip of a nail.(picture ⑨ ) It may cause breakage of the lock lever. When rotete down the lock lever, please hold the lock lever at least 5mm width. (picture ⑩ ) 5mm or more is required, NG NG picture ⑨ Picture ⑩ Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 5

49 FF20 Series Operating Instruction and autions 5.Removing FP Please lift the lock lever like flipping up in the direction of arrow.(picture 11 ) Please do not load excessive force (0.3N pin Min.) on the lock lever.(picture 12 ) OK NG 0.3N pin Min. picture 11 picture 12 6.Others When hand-soldering, please do not serve excessive sodering paste(0.05mm Min. from the top of contact ).(figure 3) 0.05mm Max. figure 3 6.ESD (Electrostatic Discharge) This cinnector is not taken ESD measure. 7.Disposal of onnector Please dispose the connector as industrial waste. Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 6

50 0.3mm Pitch Solid Back Lock FP onnector FF22E Series FEATURE ontact tails shall be located zigzag. (ontact Pitch: 0.3mm) DDK's original cam-type "Back-lock" system ensures reliable operation. Back-lock structure ensures retention from inadvertent upward pulling of the FP. Wide FP guide at the interface is improved mating FP. The nickel barrier at the contact tails prevent solder wicking. onnectors delivered with the lock lever opened. Time saving for FP inserting operation. Width : 31.1mm (84 contacts) 33.5mm (92 contacts) Depth : 6.71mm (Lock lever opened) : 7.75mm (Lock lever closed) Height : 3.65mm (Lock lever opened) : 2.45mm (Lock lever closed) SPEIFIATIONS MATERIAL//FINISH Item Specifications Rated Voltage 50V A(r.m.s.) Rated urrent 0.2A / ontact Dielectric Withstand Voltage 200V A (r.m.s.) / 1 minute Insulation Resistance 50 MΩ (min.) at 250V D ontact Resistance 50m Ω (max.) Number of ontact 84, 92 Item ontact Housing Lock Lever Material / Finish opper Alloy / Au(Flash) over Ni Plating LP Resin (UL94V-0) / Black PPS Resin (UL94V-0) / Natural : 84 ontact PPS Resin (UL94V-0) / Brown : 92 ontact Part Number FF22E-084B-R13A-S-3H Series FF22E 2 Number of ontact 084:84 ontacts 092:92 ontacts 3 ontact Position B : Upper ontact 4 ontact Style R : Right Angle 5 ontact Pitch 1 : 0.3mm 6 ontact Plating 3 : Au (Flash) over Ni Plating 7 Lock Lever Style A : Standard 8 Anti-solder Wicking S : with Anti-solder Wicking Slit 9 Halogen Free No Digit : Incompatible (92 contacts only) 3H : ompatible (84 contacts only) Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated

51 FF22E Series 0.3mm Pitch FP onnector Recommended width of metal mask ontact No D Recommended width of metal mask ontact No.(n) Recommended width of metal mask (4.10) ontact No Recommended width of metal mask FP Insert Direction Recommended PB Mounting Dimensions (onnector Mounting Side) ontact No.(n-1) F D R (Including stiffener) ontact No.1 ontact No.2 ontact No.(n-1) ontact No.(n) Recommended FP Dimensions Recommended Adhisive : Heat uring Adhesive Part Number A B D E F FF22E-084B-R13A-S-3H FF22E-092B-R13A-S Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 2

52 FF22E Series Package Specifications Reel Dimensions TP TP TP TP. User direction of feed 400mm min. User direction of feed Tailer:40 Pockets min. Empty component pockets sealded with cover tape. 800 Pockets Leader:10 Pockets Empty component pockets sealded with cover tape. User direction of feed Section A-A Emboss Tape Dimensions 4.00 A Section B-B A Section A-A B A B Number of A ontact Section B-B 4.55TP. Package Quantity:800pcs./ Reel Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3

53 0.25 mm Pitch Ultra-low Profile FP Back-lock onnector FF25 Series Upper ontact OUTLINE FF25 series is 0.25mm pitch, denpth 3.80mm and 0.66mm connector height. Ultra-low profile FP connector. FEATURE DDK's original rotate oval cam lock mechanism; "Back-lock" system ensure the reliable connection. The contact position is upper contact. Back-lock structure ensures retention from inadvertent upward pulling of the FP. onnectors delivered with the lock lever opened. Time saving for FP inserting operation. Nickel barrier prevents solder wicking. Halogen free Note : Please do not close the lock lever without inserting the FP. APPLIATIONS Mobile phone, notebook P, PDA, other Portable devices SPEIFIATIONS Rated Voltage Rated urrent Dielectric Withstand Voltage Insulation Resistance ontact Resistance 50V A (r.m.s.) 0.2A / ontact 200V A (r.m.s.) / 1 minute 50 MΩ min. at 250V D 80m Ω max. MATERIAL/FINISH Item onatct Housing Lock lever Material / Finish opper Alloy / Au (Flash) over Ni LP Resin (UL94V-0) / Ivory PPS Resin (UL94V-0) / Black Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings.

54 FF25 Series 0.25mm Pitch FP onnector Upper ontact FF25- A-R11A-3H Dimensions Odd Number of ontacts 1 Series FF25 2 Number of ontact Refer to th table 1 3 ontact Position A:Upper ontact Applicable PB Thickness:0.12±0.03mm 4 ontact Style R:Right Angle 5 ontact Tail Length 1:0.45mm 6 ontact Plating 1:Au (Flash) over Ni 7 Lock Lever Style A:Standard 8 Material 3H:Halogen Free A B± max. (1.39) 0.25±0.07 No.(n) ontact No.2 ontact B 0.10± No.(n-1) ontact onnector Location No.2 ontact Specifications and/or dimensions in this B±0.03 catalog are subject to change without notice. No.2 Please varify ontact the latest specifications with our drawings. No.(n-1) No.(n-1) ontact ontact o n t a c t s a r e a r r a n g e d zigzag on from No.1 contact. onnector Location onnector Location onnector Recommended PB Mounting Dimensions 0.50± ± ± ± ± ± ±0.02 B± ± ± ± ± ± ± ± No.(n) ontact 0.70±0.03 No.(n) ontact 0.70± ± ± ± ±0.03 No.(n-1) ontact 0.70±0.03 No.(n-1) ontact 25± ± ± No.(n) ontact 0.20 FP ±0.05 Dimensions 0.25±0.07 B± ± ± ±0.02± ± ±0.03 B± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±0.02 ±0.05 B± ±0.02 ± ±0.02 B± ± ±0.02 Recommended 0.25± ± R min. 2-R min min. No.(n) ontact 0.15± ±0.03 No.(n) ontact 0.27± ± ± ± ± R min. 0 min min. 0.25± R min..50 min. No.(n) ontact 0.12± min. 0.12± min. Stiffener Stiffener 0.12± min. min. 0.12±0.03

55 FF25 Series 0.25mm Pitch FP onnector Upper ontact Dimensions Even Number of ontact A B± max No.1 ontacrt 0.25±0.07 No.(n) ontact No.2 ontact B 0.10± No.(n) ontact onnector Location No.2 ontact zigzag on from No.1 contact. No.(n-1) ontact 0.50± ± ± ± ±0.02 B± ± ± ± No.(n-1) ontact ± Recommended PB Mounting Dimensions o n t a c t s a r e a r r a n g e d Recommended FP Dimensions No.(n) ontact 0.25± ± ± ± ± ±0.02 ±0.05 B± ± ± ± ± R min min. No.(n) ontact 0.15± ± ± min. 0.12±0.03 Stiffener Table 1 Part Number Number of ontact A B FF25-17A-R11A-3H FF25-22A-R11A-3H FF25-25A-R11A-3H FF25-34A-R11A-3H Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 3

56 FF25 Series Packing Specifications Reel Dimensions User Direction of Feed D B max. 400mm min. Tailer: 30 pockets min pockets Leader: 15 pockets min. Empty components pockets Empty components pockets sealed with cover tape. sealed with cover tape. User Direction of Feed Emboss tape Dimensions (A) E F min G± Section - Number of Part Number ontact A B D E F G FF25-17A-R11A-3H FF25-22A-R11A-3H FF25-25A-R11A-3H FF25-34A-R11A-3H Quantity:4000pcs./Reel Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 4

57 0.20 mm Pitch Ultra-low Profile FP Back-lock onnector FF26 Series Upper ontact OUTLINE FF26 series is 0.2mm pitch, denpth 3.80mm and 0.66mm connector height. Ultra-low profile FP connector. FEATURE DDK's original rotate oval cam lock mechanism; "Back-lock" system ensure the reliable connection. The contact position is upper contact. Back-lock structure ensures retention from inadvertent upward pulling of the FP. onnectors are delivered with the lock lever opened. Time saving for FP inserting operation. Nickel barrier prevents solder wicking. Halogen free correspondence presence Note : Please do not close the lock lever without inserting the FP. APPLIATIONS Mobile phone, Notebook P, PDA, other Portable devices SPEIFIATIONS Rated Voltage Rated urrent Dielectric Withstand Voltage Insulation Resistance ontact Resistance 50V A (r.m.s.) 0.2A / ontact 200V A (r.m.s.) / 1 minute 50 MΩ min. at 250V D 80m Ω max. MATERIAL/FINISH Item onatct Housing Lock lever Material / Finish opper Alloy / Au (Flash) over Ni LP Resin (UL94V-0) / Ivory PPS Resin (UL94V-0) / Black Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings.

58 FF26 Series 0.20mm Pitch FP onnector (Upper ontact) FF26- A-R11A-3H Series FF26 2 Number of ontact Refer to th table 1 3 ontact Position A:Upper ontact Applicable PB Thickness:0.12±0.03mm 4 ontact Style R:Right Angle 5 ontact Tail Length 1:0.30mm 6 ontact Plating 1:Au (Flash) over Ni 7 Lock Lever Style 8 Material A:Standard B:Long Type 3H:Halogen Free orrespondence No Digit : Without Halogen Free orrespondence Dimensions Odd Number of ontact 0.20±0.07 A B±0.07 E max. F Pattern Prohibition Area min min. No.2 ontact Recommended PB Mounting Dimensions ontacts are arranged zigzag on from No.1 contact. B± ± ±0.02 No.(n) ontact 0.50± ±0.02 No.(n) ontact B± ± ±0.03 No.(n-1) ontact 0.23±0.02 No.(n) ontact Pattern Prohibition Area min min. No.(n) ontact No.2 ontact 0.08± ±0.03 B ± ± ± ± ± ± ± ± ±0.10 Recommended FP Dimensions D±0.05 B±0.02 No.(n-1) ontact 0.23± ± ± min. a No.2 ontact 0.40± ±0.03 No.(n-1) ontact 0.23±0.02 Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 0.50± ± ± ±0.02 D±0.05 B± ± ± ± min. 0 min. min min. 0.50± ± ± ± min. Stiffener No.2 ontact 0.20±0.03 No.(n) ontact 0.065± ± ±0.02 Section a

59 FF26 Series 0.20mm Pitch FP onnector (Upper ontact) Dimensions Even Number of ontacts A B± ±0.07 E max F No.(n) ontact No.2 ontact B 0.40± ± ±0.02 No.(n-1) ontact 0.15 Pattern Prohibition Area No.(n) ontact ± min.) 0.40 min. 2.65± No.2 ontact No.(n-1) ontact 0.40± ± ± B±0.03 No.(n) ontact 0.23± ±0.02 Recommended PB Mounting Dimensions ontacts are arranged zigzag from No.1 contact. Recommended FP Dimensions Pattern Prohibition Area 0.40± ±0.02 No.(n-1) ontact 0.50± ± ± ±0.02 D±0.05 B± ± ± ± min.) 0.40 min. No.2 ontact 0.40± ±0.03 B±0.03 No.(n) ontact 0.23± ± ± ± ± ± ± ±0.10 No.2 ontact 0.20± min. a 0.50 min. No.(n) ontact 2.00 min. Stiffener 0.065± ± ±0.02 Detail a 0.20± ± ±0.02 Table ± ± ± ± ±0.10 No.(n) ontact Specifications No.2 ontact 0.20± ±0.02 and/or dimensions in this catalog are subject to change 0.065±0.02 without notice. Please varify the latest specifications with our drawings. 0.10±0.02 D±0.05 B±0.02 Part Number 0.20± ±0.05 Number of ontact 1.50 min. A B D E F FF26-39A-R11A-3H (1.39) FF26-80A-R11B (1.59) a 0.50 min. 0.12± min. Stiffener Detail a 3

60 FF26 Series Package Specifications Reel Dimensions B max. B max. User Direction of Feed B max. D User Direction of Feed User Direction of Feed D D mm min. 400mm min. 400mm min. Tailer: 30 pockets min pockets Leader:15 pockets min. Empty components Tailer: pockets 30 pockets min pockets Empty components Leader:15 pockets pockets min. sealed with Empty cover components tape. pockets sealed with Empty cover components tape. pockets sealed with cover tape. sealed with cover tape. Tailer: 30 pockets min. User Directiom 4000 pockets of FeedLeader:15 pockets min. Empty components pockets User Directiom Empty of Feed components pockets sealed with cover tape. sealed with cover tape. Emboss tape Dimensions H Part Number H A H A A Section Section Section Number of ontact User Directiom of Feed Detail A B Detail D E F G H FF26-39A-R11A-3H (1.84) FF26-80A-R11B (2.04) E Detail F min. E 1.75 E G±0.30 F min. F min. G±0.30 G±0.30 Quantity : 4000pcs./ Reel Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 4

61 0.25 mm Pitch Ultra-low Profile FP Back-lock onnector FF28 Series Upper ontact OUTLINE FF28 series is 0.25mm pitch, denpth 3.80mm and 0.66mm connector height. And cable lock mechanism reinforce the retaining force of FP by cable lock tabs on both ends of the contact. It is achieved both ultra-low profile and high retaining force. FEATURE DDK's original rotate oval cam lock mechanism; "Back-lock" system ensure the reliable connection. DDK's cable lock mechanism provides positive retention of the FP. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. The contact position is upper contact. onnectors deliver with the lock lever opened. Time saving for FP inserting operation. Nickel barrier prevents solder wicking. Halogen free Note : Please do not close the lock lever without inserting the FP. Since cable lock tabs electrify next contacts, please do not use the cable lock tabs as ground tabs. APPLIATIONS Mobile phone, notebook P, PDA, other Portable devices SPEIFIATIONS Rated Voltage Rated urrent Dielectric Withstand Voltage Insulation Resistance ontact Resistance 50V A (r.m.s.) 0.2A / ontact 200V A (r.m.s.) / 1 minute 50 MΩ min. at 250V D 80m Ω max. MATERIAL/FINISH Item onatct Housing Lock lever Material / Finish opper Alloy / Au (Flash) over Ni LP Resin (UL94V-0) / Ivory PPS Resin (UL94V-0) / Black Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings.

62 FF28 Series 0.25mm Pitch FP onnector Upper ontact FF28- A-R11A-3H Series FF28 2 Number of ontact Refer to th table 1 3 ontact Position A:Upper ontact Applicable PB Thickness:0.12±0.03mm 4 ontact Style R:Right Angle 5 ontact Tail Length 1:0.45mm / 0.3mm 6 ontact Plating 1:Au (Flash) over Ni 7 Lock Lever Style A:Standard 8 Material 3H:Halogen Free Dimensions Odd Number of ontact (1.57) FP Insertion Depth A B ± ± max able Lock Tab D able Lock Tab No.(n) ontact 0.50 B 0.10± No.(n) ontact able Lock Tab No.2 ontact able Lock Tab No.(n-1) ontact 0.10± ± ± ± ±0.03 No.2 ontact able Lock Tab onnector Location Pattern Prohibition Area 0.30 min.) 0.50±0.03 Mating Side Recommended PB Mounting Dimensions ontacts are arranged zigzag on from No.1 contact. Lock Lever ± ± ± ±0.03 No.(n-1) ontact able Lock Tab No.(n) ontact 0.70± ± ±0.03 ( ± ±0.05 heck Mark ± ± ± ± ± ± ± min. Recommended FP Dimensions 0.50± ±0.02 E±0.05 ± ± ± ± ± ± ± ± ±0.05 R 0.15 R 0.15 R min min. No.(n) ontact 0.12± min. Stiffener Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 0.73± ±0.05 heck Mark0.07 E±0.05 ± ± ± ± ± ± ± ± ± ± ± ± ± ± ± ±0.03

63 FF28 Series 0.25mm Pitch FP onnector Upper ontact Dimensions (1.57) FP Insertion Depth Even Number of ontacts 0.25±0.07 A B ± max able Lock Tab D able Lock Tab No.(n) ontact 0.50± ± ±0.03 No.2 ontact able Lock Tab onnector Location Pattern Prohibition Area 0.30 min.) 0.50±0.03 Mating Side Lock Lever ± ± ±0.02 No.(n-1) ontact able Lock Tab able lock Tab 0.30±0.02 No.2 ontact Recommended PB Mounting Dimensions ontacts are arranged zigzag from No.1 contact. No.(n) 0.48 ontact ± ± ±0.03 (3.65 B 0.73± ± ±0.03 heck Mark No.(n-1) ontact 1.40± ± ± ± ± ± ± min ± ±0.02 able Lock tab No.(n) ontact 0.10± ± E±0.05 ± ± ± ± ±0.02 Recommended FP Dimensions 0.73± ± ± ±0.05 R 0.15 R 0.15 R min min. No.(n) ontact 0.12± min. Stiffener 0.50± ± ±0.03 No.2 ontat able Lock Tab onnector Location Pattern Prohibition Area 0.30 min.) 0.50±0.03 Mating Side Lock Lever 0.30± ±0.03 No.(n) ontact able Lock Tab 0.30±0.02 No.(n-1) ontact ± ± ± ±0.03 ( ± ±0.05 heck Mark ± ± ± ± ± ± ± E±0.05 ± ± ± ± ± ± ± ± ± ± ± ±0.05 R 0.15 R 0.15 R min min. No.(n) ontact 0.12± min. Stiffener Table 1 Part Number Number of ontact A B D E FF28-5A-R11A-3H FF28-8A-R11A-3H FF28-12A-R11A-3H FF28-15A-R11A-3H FF28-20A-R11A-3H FF28-30A-R11A-3H FF28-35A-R11A-3H FF28-41A-R11A-3H FF28-45A-R11A-3H Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 3

64 FF28 Series Packing Specifications B max. Reel Dimensions User Direction of Feed User Direction of Feed 400mm min. Empty components pockets Empty components pockets sealed with cover tape. sealed with cover tape. Tailer: 30 pockets min pockets Leader: 15 pockets min. User Direction of Feed Empty components pockets Empty components pockets sealed with cover tape. sealed with cover tape. Emboss Tape Dimensions E D B max. D User Direction of Feed mm min. Tailer: 30 pockets min pockets Leader: 15 pockets min. A E F min. G± A F min. G±0.30 Section 1.84 Detail Part Number Section Number of ontact FF28-5A-R11A-3H FF28-8A-R11A-3H FF28-12A-R11A-3H FF28-15A-R11A-3H FF28-20A-R11A-3H FF28-30A-R11A-3H FF28-35A-R11A-3H FF28-41A-R11A-3H FF28-45A-R11A-3H Detail A B D E F G Quantity:4000pcs. / Reel Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings. 4

65 0.4 mm Pitch Back-Lock FP onnector FF34 Series E-ATA 8Bit Standard OUTLINE FF34 series is a FP connector which is 0.4mm pitch,1.0mm height and 3.4mm depth. It is interface connector for smaller than 1.8" HDD. FEATURE onforming to E-ATA 8bit standard (Host side) Front-acccess back lock design is short depth and suitable to compact device. DDK's cable lock mechanism provides positive retention of the FP. onnectors are delivered with the lock lever opened. Time saving for FP inserting operation. Both upper and lower contacts design accepts any FP inserting directions. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. The lock lever does not fall down to the opposite side. Nickel barrier prevents solder wicking. Note Please do not close a lock lever without inserting FP. Otherwise, contact gap will become narrow and FP insertion force will be higher. APPLIATIONS Portable HDD SPEIFIATIONS Rated Voltage Rated urrent Dielectric Withstand Voltage Insulation Resistance ontact Resistance 50V A(r.m.s.) 0.5A / ontact 200V A(r.m.s.) / 1 minute 100 MΩ min. at 500V D 50m Ω max. MATERIAL/FINISH Item ontact Housing Lock Lever Material / Finish opper Alloy /Au(Flash) over Ni Plating LP Resin (UL94V-0) / Ivory PPS Resin (UL94V-0) / Black Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated

66 FF34 Series E-ATA 8Bit Standard onnector HOST Part Number FF34-18 A -R11B Series 2 Number of ontact 3 ontact Posision 4 ontact Style 5 ontact Pitch 6 ontact Plating 7 Lock Lever Type FF34 18 : 18 ontacts A:Upper and Lower ontact R:Right Angle 1:0.4mm 1:Au(Flash) over Ni Plating B:with able Lock R R min. Stiffener R Recommended FP Dimensions Recommended FP Plating : Au over Ni Plating Recommended Adhesive : Heat uring Adhesive No.18 ontaact No.1ontact R R min. Stiffener 3.00 min Pattern Prohibition Area (3.40) 2-R No.1ontact Recommended PB Dimensions Recommended FP Dimensions Recommended FP Plating : Au over Ni Plating Recommended Adhesive : Heat uring Adhesive Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated min Pattern Prohibition Area (3.40)

67 FF34 Series Package Specifications Reel Dimensions 328 TP. 80 TP max TP TP. 400mm min. 400mm min Pockets Empty component pockets sealed with cover tape Empty component pockets sealed with cover tape Pockets Empty component pockets Empty component pockets sealed with cover tape sealed with cover 0.10 tape Emboss Tape Dimensions min Section Section - D D Section D-D D D min Section D-D Quantity:1500pcs./reel Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3

68 Serial ATA Revision 3.0 /LIF-SATA ompliant onnectors Dual ontact FF35 Series DDK Ltd. OUTLINE FF35 series is a FP connector conforming to SATA specification (Serial ATA Revision 3.0/LIF-SATA). It has 0.5mm pitch, 24 contcts FP connector which is mounted on SSD(Solid State Drive) or other devices. FEATURE Front-access back lock design is short depth and suitable to compact device. DDK's cable lock mechanism provides positive retention of the FP. onnectors are delivered with the lock lever opened. Time saving for FP inserting operation. With the upper and lower contacts design, all FP insertion directions are availavle. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. The lock lever does not fall down to the opposite side. Nickel barrier prevents solder wicking. Halogen free APPLIATIONS SSD, P, Tablet devices, other Portable devices. SPEIFIATIONS Rated Voltage 50V A(r.m.s.) Rated urrent 0.5A / ontact Dielectric Withstand Voltage 200V A (r.m.s.) / 1 minute Insulation Resistance 100 M Ω min. as 500V D ontact Resistance 50m Ω max. Operating Temperature 55 to + 85 Durability 20 ycles MATERIALS / FINISH Item Material / Finish ontact opper Alloy / Au(Flash) over Ni Plating Locking Tab opper Alloy / Au(Flash) over Ni Plating Housing LP Resin(UL94V-0)/ Ivory Lock Lever PPS Resin(UL94V-0)/ Black Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated.

69 FF35 Series 0.50mm Pitch FP onnector Dual ontact FF35-24 A-R11B-3H Dimensions 1 Series FF35 2 Number of ontact 24 ontacts 3 ontact Position A:Dual ontact Applicable FP Thickness:0.20±0.03mm 4 ontact Style R:Right Angle 5 ontact Pich 1:0.50mm 6 ontact Plating 1:Au (Flash) over Ni Plating 7 Lock Lever Type B:With able Lock 8 Material 3H:Halogen Free ±0.05(2) ±0.03(24) ± ± (3.04) 15.00± ± ±0.03(24) ±0.10 No.24 ontact Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. 2

70 FF35 Series 0.50mm Pitch FP onnector Dual ontact Applicable FP Dimension R0.20±0.05(4) ±0.05(2) 0.10 enterline of Datum 1.40±0.30 R0.20±0.05(4) 0.50 min. R0.20±0.05(2) R0.20±0.05(4) 0.70±0.05(2) ±0.05(2) ±0.05(2) enterline of Datum 0.35±0.03(24) ± ±0.30 R0.20±0.05(4) Supporting 0.20± min. Recommended 0.50 plating 0.25 of FP:Gold over Nickel plating 0.35±0.03(24) 0.70±0.05(2) Recommended Adhesive:Heat-hardened adhesive ±0.05(2) ±0.05 R0.20±0.05(2) Applicable for FP Recommended Dimension 0.20±0.03 Supporting Tape Applicable P..B. Dimension R0.20±0.05(4) 0.80 R0.20±0.05(2) 0.70±0.05(2) min. 0.70±0.05(2) ±0.05(2) enterline of Datum Pattern-prohibited area Applicable 14.95±0.05 P..B. Dimension 0.30±0.03(24) ± min. 0.70± ±0.05 (3.40) 0.45± ±0.03(24) 0.20± ±0.30 R0.20±0.05(4) Supporting Tape Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. 3

71 FF35 Series Package Specifications Reel Dimensions 38.4 Max TP User direction of feed User direction of feed ND 400mm min. 400mm min. START Tailer: 20 Pockets min Pockets Leader: 15 Pockets min. Tailer: 20 Pockets min Pockets Leader: 15 Pockets min. mpty component pockets mpty component pockets mpty component sealed pockets with cover tape. mpty component sealed pockets with cover tape. sealed with cover tape. User direction sealed of feed with cover tape. User direction of feed Emboss Tape Dimensions (24.00) ± ± Max TP. 2.5 TP. ND START (24.00) ± ± TP Section Section D D D 3.0 TP. D 3.0 TP. Section D D Section D D Quantity:1500 pcs/reel Specifications and/or dimensions in this catalog are subject to change without notice. Your checking the latest specifications with our drawings would be highly appreciated. 4

72 0.2 mm Pitch Back-Lock FP onnector FFX2 Series OUTLINE FFX2 series is a FP connector which is 0.2mm contact pitch and 0.95mm height. Applicable FP is 0.12mm thickness and 0.4mm pitch conductors on both sides. By locating 0.4mm pitch contacts on both upper and lower side, FP space is reduced to an equivalent 0.2mm contact pitch. FEATURE DDK's original "double layer contact" design enables to be 0.2mm pitch. DDK's cable lock mechanism provides positive retention of the FP. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. onnectors delivered with the lock lever opened. Time saving for FP inserting operation. Nickel barrier prevents solder wicking. orresponding to high-speed transmission. APPLIATIONS Mobile phone, other mobile devices SPEIFIATIONS Rated Voltage Rated urrent Dielectric Withstand Voltage Insulation Resistance ontact Resistance 50V A(r.m.s.) 0.2A / ontact 200V A(r.m.s.) / 1 minute 100 MΩ min. at 500V D 50m Ω max. MATERIAL/FINISH Item ontact able Lock Housing Lock Lever Material / Finish opper Alloy / Au(Flash) over Ni Plating LP Resin (UL94V-0) / Black PPS Resin (UL94V-0) / Brown Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated

73 FFX2 Series 0.2mm Pitch FP onnector FFX2- A-R11AL Series FFX2 2 Number of ontact Refer to Table.1 on Page 3 3 ontact Position A:Double Layer ontact 4 ontact Style R:Right Angle 5 Applicable PB Thickness 1:0.12± ontact Plating 1:Au (Flash) over Ni Plating 7 Lock Lever A:Standard 8 able Lock L:with able Lock Note Please do not close a lock lever without inserting FP. Otherwise, contact gap will become narrow and FP insertion force will be higher. (Upper Side) able Lock ontact No.n/2 ontact (Upper Side) able Lock ontact (Lower Side) No.n/2 ontact (Lower Side) A B ± ± ± (Lerver Open) 4.00 (Lever lose) (1.66) 0.43 (FP position) D X ± X able Lock ontact ontact ± ±0.03 D 0.15 X 0.15 X Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 2

74 FFX2 Series 0.2mm Pitch FP onnector 0.70±0.10 E± ± ±0.09 ± ± ±0.09 ± ±0.09 (0.10) 0.50± ±0.03 R0.20 R ± ± ±0.05 (0.07) (heck Mark) 0.12± ± ±0.02 The plating lead should be designed on either upper or lower side. R0.20 R0.20 R min. 0.62± ± ± ± ± ±0.10 R0.20 R0.20 In case of short strength, please keep the copper foil. heck Mark 0.73±0.03 Pattern prohibited Area 2.00 min. onnector Location (0.15) 0.65±0.02 F± ± ±0.02 Mating Side 0.40± ± ±0.03 ± ± ± ±0.03 Table.1 Part Number Number of ontact Upper Side Lower Side A B D E F FFX2-26A -R11AL FFX2-58A -R11AL Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 3

75 FFX2 Series Package Specifications Reel Dimensions User direction of feed Emboss Tape Dimensions Type Type A ±H c 1.75 E±H F Min. G±0.30 A f ±H (16.00) 4.00 E±H 1.75 F±0.10 G±0.30 Section c-c c d Detail a d Section f-f f g Detail e g 2.05 TP TP B TP. TP. D Detail a or e 400mm Min. Tailer30 Pockets Min. Empty components pockets sealed with cover tape pockets Leader: 15 pockets Empty components pockets sealed with cover tape. Use direction of feed FFX2-XXA-R1XAL ,000pcs. for FFX2-XXA-R1XAL Section d-d Section g-g Table. 2 Part Number Number of ontact A B D E F G H Enboss Tape Quantity FFX2-26A -R11AL Type FFX2-58A -R11AL Type pcs. / Reel Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 4

76 FFX2 Series 0.2mm Pitch FP onnector FFX2- A-R11BL Series FFX2 2 Number of ontact Refer to Table. 3 on Page 7 3 ontact Position A:Double Layer ontact 4 ontact Style R:Right Angle 5 Applicable PB Thickness 1:0.12± ontact Plating 1:Au (Flash) over Ni Plating 7 Lock Lever B:Long Lock 8 able Lock L:with able Lock Note Please do not close a lock lever without inserting FP. Otherwise, contact gap will become narrow and FP insertion force will be higher. (Upper Side) able Lock ontact No.n/2 ontact (Upper Side) able Lock ontact (Lower Side) No.n/2 ontact (Lower Side) A B ± ± ± (Lever losed) 4.00 (Lever Opened) (1.86) 0.43 (FP position) D X ± X able Lock ontact ontact ± ±0.03 D 0.15 X 0.15 X Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 5

77 FFX2 Series 0.2mm Pitch FP onnector Upper Sie Loer Sie 0.70±0.10 E± ± ±0.09 ± ± ±0.09 ± ±0.09 (0.10) 0.50± ±0.03 R0.20 R ± ± ±0.05 (0.07) (heck Mark) 0.12± ± ±0.02 The plating lead shoud be designed on either upper or lower side. R0.20 R0.20 R min. 0.62± ± ± ± ± ±0.10 R0.20 R0.20 In case of short storength, please keep the copper foil. heck Mark Recommene PB Pattern Layot 0.65±0.02 F± ± ±0.03 Patter prohibited Area 2.00 min. onnector location (0.15) 0.40±0.02 Mating Side 0.40± ± ±0.03 ± ± ± ±0.03 Table. 3 Part Number Number of ontact Upper Side Lower Side A B D E F FFX2-100A -R11BL Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 6

78 FFX2 Series Package Specifications Reel Dimensions Emboss Tape Dimensions (16.00) A f E±H 1.75 F±0.10 G±0.30 Section f-f f g Detail e g 2.30 TP B TP. TP. D Dtail e User direction to feed 400mm Min. Tailer30 Pockets Min. Empty components pockets sealed with cover tape. 3000pockets FFX2-XXA-R1XBL ,000pcs. Leader: 15 pockets Empty comonents pockets sealed with cover tape. User direction to feed for FFX2-XXA-R1XBL Type ±H Section g-g Table. 4 Part Number Number of ontact A B D E F G H Emboss Tape FFX2-100A -R11BL Type 2 Quantity 3000pcs. / Reel Specifications and/or dimenssions in this catalogue are subject to change without notice. Your catalogue checking the latest speifications with our drawings would be highly appreciated. 7

79 0.2 mm Pitch Shielded Back-Lock FP onnector FFX2S Series OUTLINE FFX2S series is a FP connector which is 0.2mm contact pitch and 1.05mm height and attached with metal shield. Applicable FP is 0.12mm thickness and 0.4mm pitch conductors on both sides. By locating 0.4mm pitch contacts on both upper and lower side, FP space is reduced to an equivalent 0.2mm contact pitch. FEATURE The metal shield is attached to improve the EMI performance. FFX2S support high speed transmission which results in an excellent solution for applications using ultrafine coaxial cables. The metal shield provides a grounding path between the conductors and PB. DDK's original "double layer contact" design enables an effective pitch of 0.2mm. DDK's cable lock mechanism provides positive retention of the FP. Back-lock structure ensures retention from inadvertent from upward pulling of the FP. onnectors delivered with the lock lever opened. Time saving for FP inserting operation. Nickel barrier prevents solder wicking. APPLIATIONS Notebook P, SSD SPEIFIATIONS Ultrafine oaxial Harness FP Rated Voltage Rated urrent Dielectric Withstand Voltage Insulation Resistance ontact Resistance 50V A(r.m.s.) 0.2A / ontact 200V A(r.m.s.) / 1 minute 100 MΩ min. at 500V D 50m Ω max. Both FP and ultrafine coaxial harness are mateable. MATERIAL/FINISH Item Shield able Lock ontact Lock Lever Housing Material / Finish opper Alloy / Au(Flash) over Ni Plating PPS Resin(UL94V-0)/ Black LP Resin(UL94V-0)/ Black Specifications and/or dimensions in this catalog are subject to change without notice. Please varify the latest specifications with our drawings