UNITIZED AIR & FLUID FITTINGS
|
|
- Brianne Goodwin
- 5 years ago
- Views:
Transcription
1 UNITIZED AIR & FLUID FITTINGS What you ll find in this catalog Thousands of fittings for plastic tubing in sizes and configurations you can't find anywhere else... fittings in brass, stainless steel, and plastic. If you can't find what you need here, ask us about making a special for you. We'll do whatever we can to help with your unique requirements! 60 Table of Contents Tube-to-tube barb fittings Straights and Reducing Couplings..... Elbows and Tees Reducing Tees Parallel Run L-Tees Parallel Run Reducing L-Tees Crosses Reducing Crosses Manifold, In-Line Reducing Manifold, Stainless Steel Y Fittings : -6 Male thread-to-tube : 6-2 Male thread-to-tube : -2 Male thread-to-tube Male thread-to-tube , 6 with O-Ring Seal with Captive Rubber Gasket Elbows and Tees Extension, plugs, Caps Adjustable Elbows & Tees Swivel Elbows & Tees Female thread-to-tube /4-2 Male straight thread-to-tube Straights Elbows and Tees L-Tees / Male pipe thread-to-tube Straights Elbows and Tees Elbows L-Tees and Reducing L-Tees / Male pipe thread-to-tube , 0 Straights and Straight Manifolds Ebows & L-Tees Reducing L-Tees Tees and Reducing Tees Combo Tees ( branches) V-Tees Male Nipples with tube branches / to /2 NPT manifolds / NPT Swivel Nipple /4 Male pipe thread-to-tube , 2 Straights and Straight Manifolds..... Elbows and L-Tees Reducing L-Tees Tees Combo Tees ( branches) V-Tees / Male pipe thread-to-tube Straights Elbows Tees / Female pipe thread-to-tube , Straights and Straight Manifolds Elbows and 4 Elbows Tees Combo Tees ( branches) L-Tees and V-Tees /4 Female pipe thread-to-tube....., Straights and Straight Manifolds..... Elbows L-Tees Tees and Combo Tees ( branches).. Adapters , 24 Bulkhead Fittings , Caps & Plugs : F Series Fittings , 26 : Manifolds : Orifice Fittings : PTF Series: 2-piece fittings Male Thread to tube 0-2 thru /2NPT tube to tube Reducing Bushings Small metric fittings , 2 M x 0. Series M x 0. Sereis M6 x Series Stainless Steel Fittings (How to order) New items have been added to virtually every category of fitting in this catalog. The items are highlighted in black boxes with white text. They are easy to spot. i
2 Save space cut assembly time reduce overall costs Using this Catalog. Silver solder joints are typical on all fabricated Memco fittings. We do not use soft solder joints on any of our products. The solder we use complies with FDA, NSF, and medical grades Class VT leadfree cadmium-free solder. Our solder meets the directive 2002/96/EC on waste electrical and electronic equipment (WEEE) and directive 2002/9/EC on the restricted use of certain hazardous substances in electrical and electronic equipment (ROHS). 2. The fittings in this catalog are shown at actual size for quick visual reference.. Product availability: Brass... Stainless... Electroless Nickel Plated... Aluminum All products are available in brass directly from inventory. Products are available in stainless steel but may not be carried in stock at the time of your order. Electroless nickel plating is done on a per order basis. 4. O'Ring material availability: Standard - Buna N Optional - EPDM, Viton, Silicone & Teflon encapsulated silicone. How to Order Part numbers are listed in rows below product drawings. Line numbers for each row are used to make product cross-referencing easy. (The price list also references line numbers) A. For Brass items: use part number shown. 29 / 64 Example: B (See line, page ) B. For stainless steel: use part # plus suffix S/S Example: B S/S C. For Electroless Nickel plate: Part # plus suffix N/P Example: B N/P / 4 Hex Typ. /2 Typ. C. For Aluminum: Part # plus suffix AL and specify clear or color anodized Example: B AL Clear B 6. Developing Part Numbers Use the convenient table below to select the barb numbers (sizes) corresponding to the internal diameters of the plastic tubing being used. Branch Barb # /2 /2 4 /2 6 0 Tubing I.D. /64 /.0 (2mm) /2 / /2 (4mm).0 / /2 /4 / (mm) / /2 Hole Thru Part numbers are written with male thread first female thread indicated second. Example: /4 BSPT to / (F) (Line # 94, Page 2) Branch numbers indicate barb sizes. First number designates the branch at the 9:00 O clock position in the drawing. The largest branch is / 64 Ref 9 64 /4 BSPT / NPT 9 / Hex called out first. Other branch numbers follow in a clockwise direction. 9 O'clock # 6 Barb Example: RT6--4 (Line #, Page 2) MEM-CO Model Designations are coded as follows: B = Straight male thr'd to tube C = coupling, tube to tube B = thread to tube L = elbow, barbs at 90 T = tee/ (-) = ( way tee) T90 = branches at 90 X = 4 way cross R = reducer RB = reducer bushing RC = reducer coupling RT = reducer tee RX = reducer cross A = adjustable BK = bulkhead F = female thread HN = hex nipple IRM = in-line reducer manifold M = manifold SW = swivel V = outlets at 60. Orifice Fittings 2 O'clock # Barb / 2 / 2 O'clock # 4 Barb Many of our small brass and stainless fittings such as C, C, B, B2, T, T2, etc., are available as orifice fittings. In the case of Tee s, the branch and/or one end of the run may be an orifice. A cross can have as many as three orifices. See page 24 for C Series orifice fittings. ii The general dimensions in this catalog are subject to change without notice
3 9 Industrial Way Atkinson, NH 0 Telephone (60) 94- Fax (60) Couplings / 2 / 2 / / / / C0 Not Shown MEM MEM / Typ. / 4 / 64 / 2 / 2 MEM / C / 4 Typ. Slim line coupler 2 / 2 C2 C2-SL C2 /2 C C /2 (4mm) C4 C C6 C-SL / C (mm) C6 / C C0 Reducing Couplings / Dia. Note / 4 Dia. / Dia. Typ. / Dia. Typ. / / 2 / Dia. MEM 2 / / 4 / / 2 RC2- RC- RC-2 RC-2 /2 RC4-2 RC4-2 /2 Note : # /2 (4mm) barbs are available for /2 I.D. tubing RC4- RC4- RC- RC6-2 RC6 RC6- / 2 RC6-4 RC 4 RC-6 Many Other Combinations Available - Ask Us! RC0- Elbows / 4 2/ 2 2/ 2 / 4 2/ 2 / 4 / 2 9/ / / Tees / 4 / 2 9/ / 4 L L2 L L4 L L6 (Fabricated) L (Fabricated) T /2 (4mm) / / 4 MEM / 2 / / 2 9/ / / / 2 / 2 2 / 2 / 2 MEM 2/ 2 2/ 2 / / 2 / / / / 64 4 T T2 T2 /2 Not Shown T T /2 (4mm) T4 T Page T6 T (mm) T T0 Not Shown
4 Tube to Tube Fittings Reducing Tees Part numbers: First number designates the branch at the 9:00 O clock position in the drawing. The largest branch is called out first. Other branch numbers follow in a clockwise direction. 9 O'clock # 4 Barb 2 O'clock # Barb / 2 O'clock # Barb Reducing Tees are available in almost any combination of barb sizes! Note: # /2 barbs (4mm) are available for /2 I.D. tubing 29/ 2 / 2 / 2 / 2 / 2 / / / / 2 / 2 / 2 / 2 / / 29/ 2 RT-- RT2--2 RT-2-2 RT-- RT-2- RT-2 /2- RT-4- RT4--4 RT4-2-4 RT4-- RT4--4 RT4-4-2 RT4-4- Many Other Combinations Available - Ask Us! Note: # /2 barbs (4mm) are available for /2 I.D. tubing / / 2 9/ 2/ 2 / / / / / RT-2- RT-- RT6-2-6 RT6--6 RT6-4-6 RT6-6- Other Combinations Available 6 / 2 Note: # /2 barbs (4mm) are available for /2 I.D. tubing / 2 / 2 9/ 9/ / The RT0 can have any size branches / / 29 / 64 RT6-- RT6--2 RT6-2- RT6--4 RT6-4- RT6--6 Other Combinations Available RT-2- RT-- RT-6- RT0-6-0 RT0--0 RT0--0 Page 2
5 Telephone (60) 94- Fax (60) Parallel Run LTees / 4 / 4 / / 4 / / / / / T-L- Not Shown T-L- T2-L2-2 T-L- T4-L4-4 T-L- Parallel Run Reducing LTees / / / / /4 / / 4 MEM / / 4 / / / / / / / /4 2/2 9 RT-L- RT2-L-2 RT-L- RT-2L-2 RT-2L- RT4-L-4 Crosses / / 2 / / / / / 4 MEM 2 / 2 / / 64 / / / / / 2 / 2 / 4 / X0 Not Shown 0 X shown X2 X2 /2 X2 x Five Branches X X /2 (4mm) X x Five Branches X4 X X6 X (mm) X X0 Parallel Run Combinations Note: Different size branches may be used Dia. Typ. 2 /2 Dia. Typ. Dia. Typ. T-6-L6-6 IM6-L6-6-L6 H-6 Page
6 Tube to Tube Fittings Reducing Crosses Other Combinations Available / / 2 / / / / 4 2 / 2 / / / 4 RX Not Shown / / 9/ / / 2 / 2 In-line Reducing Manifolds / RX--- RX--- RX-2--2 RX RX RX-4--4 RX / Consult factory for different branch sizes and locations. One of countless combinations is shown below. / / 2 Barb Size May be #4 thru #0 Number of Branches Fitting Series IRM6 to 2 x 4 x 2 Mixed Barb Sizes available # thru #4 /2 / Ordering example above shows #6 barb inlet with IRM 6 to 2 x IRM 6 to 4 x 4 IRM 6 to 4 x outlets three #2 branches; two #4 branches Y Fittings Note: Other Y sizes are available as reducing Ys / Dia. Y /2 Not Shown 0 / Dia. Y6 Not Shown Y0 Not Shown / Dia. / 2 Typ. / / 2 Typ. / 9/ 2 Typ. / 2 Y- () Y-2 (shown) Y- Y- /2(4mm) Y-4 Y-6 Y- Y-0 4 Page 4
7 9 Industrial Way Atkinson, NH 0 Telephone (60) 94- Fax (60) Male Thread to Tube with O-Ring Seal Assembled (Also available as orifice fittings) / 2 /2 Typ. / Hex Typ. O'Ring / 2 / 2 O'Ring O'Ring 9 / 2 O'Ring B /2-0 Not Shown 9 / 2 2 / 2 O'Ring O'Ring B6 Not Shown / 64 Typ Typ. 9/ Typ. B-0 B2-0 B2 /2-0 B-0 B /2-0 (4mm) B4-0 B-0 B B 0 /4 Male Thread to Tube with Captive Rubber Gasket Assembled / 2 B-0- /4 0-2 Male Thread to Tube Fibre Gasket Supplied (*Also available with -6, 6-2 and -2 Threads see page 0) / 4 Hex Typ. /2 Typ. 2 /4 Hex Typ. / /4 Hex Typ. /2 Typ. /2 Typ. 29 / 64 / 64 / 64 9 / 64 B* B2* B2 /2* B B /2 (4mm) B4 B B6 Elbows: 0-2 Male to Tube Fibre Gasket Supplied 0LB 0T / 4 Hex Typ. / Typ. Rubber Seal 9 / 9 2 / 2 / 2 / B /2-0- /4 2 Not Shown B2-0- /4 B2 /2-0- /4 B-0- /4 B /2-0-/4 (4mm) B4-0- /4 / 2 0LB2 0LB2 /2 9/ 2 0LB* / 2 / Hex Typ. Tees: 0-2 Male to Tube Fibre Gasket Supplied / Hex Typ. 9/ 2 0LB4* / 2 / / Hex / / 9/ 2 9/ 2 9/ 2 0T2 0T2 /2 0T* 0T /2* (4mm) 0T4* 0-2 Caps, Plugs & Extensions 0-2 Female Thread to Tube /4 Hex Typ. /2 Typ. 9/ 29 / 64 Note: also available with captive rubber seal /4 Hex Typ. 9/ Cap Short 0-2 Cap 2 2/2 2/2 /4 Hex Typ. /2 / 64 *Note: also available with O Ring seal 9/ 2 /2 Typ. / 2 0LB /2* (4mm) Note: also available with captive rubber seal *Note: also available with O Ring seal See more 0-2 fittings on pages 2 & 26 / Hex / 4 Hex. / 9/2 9/2 Furnished with O'Ring Assembled Captive Rubber Seal /4 / 4 Hex /2 0-0 Plain Plug 0-0-/4 Plain Plug 0-2 Plain Plug /2 /4 0LB Not Shown ( Note: Fibre Gasket Supplied) /4 Hex EX0-0 (/4) /2 0LB* /2 /2 9/2 9/2 B-0 Not Shown B-0 (mm) 0LB6 Not Shown 0LB6* 0T Not Shown 0T* /4 Hex EX0-0 /2 2 0-FB 0-FB2 0-FB 0-FB4 0-FLB 0-FLB2 0-FLB (Short) 0-FLB2 (Short) Page
8 0-2 Thread to Tube 0-2 Adjustable Elbows with O-Ring Seals Assembled /2 /4 Hex / Hex /4 Hex /2 /2 /4 Hex /2 O'Ring 2/64 O'Ring / Hex 2/64 O'Ring / Hex 2/64 A0-LB A0-LB 2 A0-LB 2 /2 22 /2 /4 Hex A0-LB /2 Not Shown 2/64 /4 Hex 2/64 /4 Hex O'Ring / Hex /64 O'Ring / Hex 9/ O'Ring / Hex 9/ A0-LB A0-LB /2 (4mm) A0-LB4 A0-LB Adjustable TEEs with O-Ring Seals Assembled 2/2 / 2/64 /4 Hex / Hex A0-T /2 Not Shown 2/64 / Hex /4 Hex 2/2 O'Ring / 2 / O'Ring /2 /4 Hex / Hex /2 /4 Hex / Hex 2/64 /4 Hex / Hex O'Ring (Not shown) O'Ring O'Ring A0-T A0-T2 A0-T2 /2 A0-T A0-T /2 (4mm) A0-T4 A0-T Swivel Elbows Fibre Gasket Supplied / / /64 60 /2 60 / Hex Typ. / Hex 0SW-L 0SW-L2 0SW-L2 /2 0SW-L Swivel Tees Fibre Gasket Supplied /64 2/64 2/64 / Hex Typ. / Hex 0SW-T 0SW-T2 0SW-T 26 Page 6
9 /4-2 Straight Male Thread to Tube /4-2 Male Straight Thread to Tube Fibre Gasket Supplied / Hex Typ. 9 2 Typ. 4 Typ B / B 4-2 B2 4-2 B 2 /2 4-2 B 4-2 B /2 (4mm) 4-2 B4 4-2 B 4-2 B6 Elbows: /4-2 Male to Tube Fibre Gasket Supplied 9 2 Typ Typ. / Hex Typ L B 4-2 LB2 4-2 LB 2 /2 4-2 LB 4-2 LB /2 (4mm) 4-2 LB4 4-2 LB LTees: /4-2 Male to Tube Fibre Gasket Supplied Note: Also available as Reducing L-Tee combinations similar to two examples below 4 Typ. 9 2 Typ. Typ. #2 # #2 # L T 4-2 LT2 4-2 LT 2 /2 4-2 RLT RLT 2- Tees: /4-2 Male to Tube Fibre Gasket Supplied Note: Also available as Reducing Tee combinations similar to the example below / 4 / 2 2 #4 #2 / 4 2 Typ. / Hex Typ. / T /2 / T 4-2 T2 4-2 T2 /2 4-2 T 4-2 T /2 (4mm) 4-2 T4 4-2 RT T Page
10 / NPT Male Thread to Tube / Male Pipe Thread to Tube 4 64 Hex Typ Typ. 64 Typ / B /2 49 / / 64 / 64 6 / 64 / B & / B / B / B2 / B2 /2 / B / B /2 (4mm) / B4 / B / B6 / B (mm) / B Elbows: / NPT Male to Tube Typ. 2 2 Typ / LB / / LB6 / LB / LB2 / LB2 /2 / LB / LB /2 (4mm) / LB4 / LB LTees: / NPT Male to Tube 4 / 64 4 / 64 4 / / 64 / LB6 Note: Also available in Reducing L-Tee combinations. See RLT examples on opposite page, line 0. 2 / LT 4 Elbows / LT2 / LT2 /2 / LT / NPT Male to Tube / NPT Male to Tube Mem-co now makes 4 elbows in any combination. Also available in /4 & / NPT. 4 4 Hex 4 4 Hex Note: also available with #, #2, & #4 barbs 4 Hex Hex.2.. Examples / LB-4 / LB6-4 / LB6-4 /6 LB6-4 -Long 4 Tees: / NPT Male to Tube / 4 / Note: Also available as Reducing Tee combinations similar to the example below #4 2 9/ 2 Typ. #2 / 4 Hex Typ. / 4 / 2 / / 2 Typ. / T /2 9/ 2 Typ. / T / T2 / T2 /2 / T / T /2 (4mm) / T4 / RT 4-2 /T Page
11 Telephone (60) 94- Fax (60) Typ. 4 / Male Pipe Thread to Tube Hex Typ. /2 Typ. / Typ. / 4 not shown 2 2 / B /2 2 / 2 /2 Hex Typ. / 2 /2 / Typ. / 2 / B /2 Typ. / Typ. / / B0 6 / B / B2 / B2 /2 / B / B /2 (4mm) / B4 / B / B6 / B (mm) / B / B0 / Male Pipe Straight Manifolds 4 Typ. Hex Typ. / Typ. / Typ. 4 Part Numbering Example Thread Size / B2 x 2 Barb # (Size) Quantity of Barbs Top View Top View Top View / B x 2 / B2 x 2 / B2 x / B2 x 4 / B x 2 / B x Elbows: / NPT to Tube 9 / 2 / 2 / / 2 / 9 / 2 9 / 9 / Hex Typ. 9 / 9 / / / LB /2 / / / 64 2 / 2 / LB / LB / LB2 / LB2 /2 / LB / LB /2 (4mm) / LB4 / LB / LB6 / LB (mm) / LB Hex / LB0 / LB0 LTees: / NPT Male to Tube 9 / / / 2 2 / 2 / 4 / 4 / Hex Typ. 2 Typ. / 4 / 2 / 2 / LT /2 Note: Also available as Reducing Tee combinations similar to this example #2 # / 2 / 4 9 / 2 / 2 9 / LT / LT2 / LT2 /2 / LT / LT /2 (4mm) / RLT-2 / LT4 / LT Page 9
12 / NPT Male Thread to Tube Tees: / NPT Male to Tube / / 2 / Typ. Hex Typ. / / / 9 Typ. / Typ. / / / / / 64 / Hex / / T /2 / T / T0 /4 / T2 / T /2 / T / T2 /2 / T (4mm) / T4 / T4-90 / T / T6 / T (mm) / T / Hex Typ. / Typ. 2 2 / / / T x /2 2 / 2 / 2 # 2 # #4 9 /T0 40 Note: Reducing Tee s available with other barb combinations #2 / 4 / T x / T2 x / T x / T x /2 (4mm) / T4 x / RT x / RT4 x 2 4 / / /2 / / VT /2 9/ 9/2 / VT / VT2 / VT2 /2-20 / VT / VT /2 (4mm) / VT4 / VT 42 / Male Pipe Nipples with Tube Branches Hex Typ. / TYP. / TYP. / 2 / HN-T /2 9/ / HNX / HNX2 / HN-T / HN-T2 / HN-T / HN-T /2 (4mm) / HN-T4 4 Page 0
13 9 Industrial Way Atkinson, NH 0 Telephone (60) 94- Fax (60) /4 Male Pipe Thread to Tube 9 Hex Typ. /2 4 Typ. /2 -/ -/2 -/ -/ /4 B /4 B2 /4 B2 /2 /4 B /4 B4 /4 B /4 B /2 (4mm) /4 B6 /4 B (mm) /4 B /4 B0 /4 Male Pipe Straight Manifolds /2 /4 B2 x 2 4 Thread Size Barb # (Size) Quantity of Barbs Part Numbering Example # Barb P/N /4 B x 2 /4 B x /4 B x 4 /4 B x /4 B x 6 /4 B x #2 Barb P/N /4 B2 x 2 /4 B2 x /4 B2 x 4 /4 B2 x /4 B2 x 6 /4 B2 x -/ Top View /4 B2 x 2 Also available with up to seven # or #2 barbs as listed in part numbers above /4 B x 2 /4 B x Top View /4 B x 4 Elbows: /4 NPT Male to Tube / 2 / 2 9 Hex Typ. 4 Typ. / 2 / 2 9/ 2 2 / 2 / 2 9/ 2 /4 LB /2 (4mm) / 2 / 2 64 / Hex 46 /4 LB /4 LB2 /4 LB2 /2 /4 LB Short /4 LB /4 LB4 Short /4 LB4 /4 LB LTees: /4 NPT Male to Tube / 2 / 2 / 9/ 2 / 2 2 / 2 Note: Available in Reducing LTee combinations similar to the example below /4 LT /2 (4mm) / /4 LB6 /4 LB (mm) / /4 LB /4 LB0 # -/ -/2 /2 /2 /2 #4 -/ 4 /4 LT /4 LT2 /4 LT2 /2 /4 LT /4 LT /2 (4mm) /4 LT4 Example: /4 RLT4- Page
14 2 /4NPT Male Thread to Tube Tees: /4 NPT Male to Tube Note: Also available as Reducing Tee combinations similar to this example of part number /4 RT4-2 / / 2 #4 #2 / 64 / Hex 9 Hex Typ. / 4 9 / / " 9 / Hex /4 Typ. / / /4 T2 /4 T2 /4 T /2 /4 T /2 /4 T (4mm) /4 T4 /4 RT4-2 /4 T /4 T6 /4 T (mm) /4 T /4 T0 4 / / /2 / / 4 / 2 /2 /2 /4 T /2 x (4mm) /4 T4-90 /4 T x /4 T2 x /4 T2 /2 x /4 T x /4 T /2 x /4 T4 x 49 9 / 2 / / / 2 /4 VT /4 VT4 /4 RVT4-2-RH /4 RVT4-2-LH 0 Page 2
15 / Male Pipe Thread to Tube / Male Pipe Thread to Tube / Hex Typ. / / 2 / / 2 29 /2 / 29 /2 / / B2 / B2 /2 / B / B /2 (4mm) / B4 / B / B6 / B / B / B0 / Male Pipe Straight Manifolds Thread Size / B x 2 Barb # (Size) Part Numbering Example Quantity of Barbs # Barb P/N /B x 2 /B x /B x 4 /B x /B x 6 /B x #2 Barb P/N / B2 x 2 / B2 x / B2 x 4 / B2 x / B2 x 6 / B2 x #2 /2 Barb P/N / B2 /2 x 2 / B2 /2 x / B2 /2 x 4 / B2 /2 x / B2 /2 x 6 / B2 /2 x # Barb P/N / B x 2 / B x / B x 4 / B x / B x 6 #4 Barb P/N / B4 x 2 / B4 x / B4 x 4 / B4 x 2 Available with #, #2, #2 /2, #, #4, and # barbs as listed in the part numbers above # Barb P/N / B x 2 / B x / B x 4 Elbows: / NPT Male to Tube 2 /2 / / 9 /2 / / Hex Typ. 2 /2 / 2 /2 2 /2 9 /2 / 2 /2 2 /2 / LB / LB /2 (4mm) / LB4 / LB / LB6 / LB (mm) / LB / LB0 Tees: / NPT Male to Tube / 4 / Hex Typ. / / 9 /2 / 2 /2 2 /2 / / 9 /2 / 2 /2 4 / T / T /2 (4mm) / T4 / T / T6 / T (mm) / T / T0 Page
16 2 / 2 / 2 / / 2 / / 2 / / 2 info@mem-co.com / Female Pipe Thread to Tube / Female Pipe Thread to Tube / FB /2 x Top Views of Manifold Fittings (Available with # or #2 Barbs) 2 / 2 9 / Hex Typ. 2 / 2 / 2 Typ. / FB 2 / 2 / 2 / FB2 Thread Size, Female /F B2 x 2 Barb # (Size) Quantity of Barbs Part Numbering Example / FB x 2 / FB x / FB x 4 / FB x / FB x 6 / FB x / FB2 x 2 / FB2 x / FB2 x 4 / FB2 x / FB2 x 6 / FB2 x / FB /2 x (4mm) / / FB /2 x 2 / 2 / 2 / FB2 /2 / FB / FB x 2 / FB x / FB /2 (4mm) / FB4 / FB / FB6 / FB 6 Elbows: / NPT Female to Tube 4 9 / Hex Typ. 9 / Hex / 2 / 2 9 / 2 2 / 2 29/2 / 2 Typ. / 2 / 2 / 2 9 / 2 / 2 / 2 / 2 9 / / FLB / FLB2 / FLB2 /2 / FLB / FLB /2 / FLB4 / FLB / FLB6 Page 4 / FLB6-4
17 / Female Pipe Thread to Tube LTees: / NPT Female to Tube / / 2 9 / Hex Typ. / 2 2 / 2 2 / 2 2 / 2 9 / 2 2 / 2 / 2 / FLT /2 2 / 2 / / / FLT / FLT2 / FLT2 /2 / FLT / FLT /2 (4mm) / FLT4 / FLT VTees: / NPT Female to Tube / 2 / 2 9 / 2 / / FVT /2 9 / FVT / FVT2 / FVT / FVT /2 (4mm) / FVT4 Tees: / NPT Female to Tube / FT /2 / / 2 / / 4 9 / 9 / Hex Typ. / 2 9 / 9 / Hex 60 / FT / FT2 / FT / FT /2 (4mm) / FT4 / FT / FT6 / / 4 9 / 9 / Hex Typ. 2 / 2 / 2 / 2 / 2 / 9 / Hex 2 / 2 / 2 / FT /2 x / FT x 6 / FT x / FT2 x / FT x / FT /2 x (4mm) / FT4 x / FT x / FT6 x Page
18 /4 Female Pipe Thread to Tube /4 Female Pipe Thread to Tube Manifold FittingsTop Views (Available with up to eight # or #2 Barbs) / / Hex Typ. 9 / 2 Typ. Thread Size, Female /4F B2 x 2 Barb # (Size) Quantity of Barbs Part Numbering Example /4 FB /4 FB2 /4 FB2 x 2 /4 FB2 x /4 FB2 x 4 /4 FB2 x /4 FB2 x 6 /4 FB2 x /4 FB2 x 62 Manifold Fittings available with up to seven # barbs / Hex Typ. / / 2 29 / 2 /4 FB /2 x 2 (mm) /4 FB /2 x Manifold Fittings available with up to three #4 barbs Top View / / / 2 29 / 2 /4 FB x 2 /4 FB x /4 FB /4 FB /2 x 2 /4 FB /2 x /4 FB4 /4 FB4 x 2 /4 FB /4 FB6 /4 FB (mm) /4 FB /4 FB0 6 Elbows: /4 NPT Female to Tube 2 / 2 9 / 2 / 2 2 / 2 / Hex Typ. 9 / / / / 9 / 2 / 2 / Hex /4 FLB /4 FLB2 /4 FLB2 /2 /4 FLB /4 FLB /2 (4mm) /4 FLB4 /4 FLB /4 FLB6 /4 FLB (mm) /4 FLB /4 FLB0 64 Page
19 /4 Female Pipe Thread to Tube LTees: /4 NPT Female to Tube 9 / 2 / 2 2 / 2 / 29 / 2 / 2 2 / 2 / 9 / / Hex Typ. 9 / / 9 / 2 Typ. / / / 2 6 /4 FLT /4 FLT2 /4 FLT2 /2 /4 FLT /4 FLT4 /4 FLT /4 FLT6 Tees: /4 NPT Female to Tube / / / / / 4 9 / 2 Typ. / Hex Typ. / / / / Hex 66 not shown /4 FT /4 FT2 /4 FT2 /2 /4 FT /4 FT4 /4 FT /4 FT6 /4 FT (mm) /4 FT /4 FT0 / / 29 / 2 / / Hex Typ. / / 2 / 6 / 29 / 2 / / 9 / 2 Typ. / / 2 6 /4 FT2 x /4 FT2 /2 x /4 FT x /4 FT /2 x (4mm) /4 FT4 x /4 FT x /4 FT6 x Bulkhead Fittings / 4 2 / 2 2 / / 64 2 / / 4 O'Ring / 4 Hex Typ. 0-2 / 4 / 64 / 64 Page / 4 /4-2 / Hex 0 BK- or 0BK-2 0 BK-2 /2 0 RBK4-2 0 RBK4-2 /2 0 RBK-O-4-2 /2 /4 BK- / 4 /
20 Bulkhead Fittings, Bushings, Caps & Plugs Bulkhead Fittings / 2 / 2 / 2 / 2 / 2 /-24 / BK-4 / Hex /-24 / BK-6 / Hex / NPT / NPT BK6 / Hex 69 LBulkhead Fittings Note: Also available in Tee and Vee combinations / -/64 Ref. / 2/2 / /2 /4 /4 # #4 #6 -/2 Ref /4 Hex Typ. /2 #, #2, or #2-/2 Barbs per part numbers below /4-2 / Hex #, #-/2, or #4 Barbs per part numbers below /2 /-24 / Hex #, #-/2, or #4 Barbs per part numbers below /2 /-24 / Hex #, #-/2, #4, or #6 Barbs per part numbers below 2 2 0BK-L 0BK2-L2 0BK2 /2-L2 /2 Reducing Bushings Note: See page 2, Line #9 for additional multi-hole 0-2 bushings sizes / and /4 Elbows, L-Tees, and Teess Caps & Swivel Nipple /4 Hex Typ. 9/2 0-2 Cap (Short) /2 /4 BK-L /4 RBK-L /2 /4 RBK-L4 B Hex A Thread C Thread 9 Hex /2 D 9/2 /4 / BK4-L4 / RBK4-L /2 / RBK4-L Hex 9/2 / Hex /4-2 Swivel Nipple (NOT a Rotary Joint) 'O' Ring Seal / #0-2 Cap / Cap /4 Cap / Cap / SN 0-2 /2 RB * RBB /-0 R e d u c e r B u s h i n g D i m e n s i o n s / BK6-L6 / RBK6-L4 / RBK6-L /2 / RBK6-L Reducer Bulkhead Bushing 0-2 Thru / Hex /-24 * Lock nut and washer included A Thread /4 NPT /4 NPT /4 NPT /4 NPT /4 NPT /4 NPT / NPT / NPT / NPT /4-2 /-24 B Hex 9/ 9/ 9/ 9/ 9/ 9/ / / / / / C Thread / NPT / NPT / NPT / NPT 0-2 / NPT D Height /4 /2 /2 /2 /4 /4 9/ 9/ /2 /2 /2 Part # RB /4-0 RB /4-0 Short RB /4- / Short RB /4- / short RB /4- / RB /4- / RB /-0 RB /- / RB /-0 RB 42-0 RBB/-0 2 / Cap / Hex 0 Plugs / 4 Hex 9/2 / Captive Rubber Seal / 4 Hex / Hex. /4 9/2 /2 Furnished with O'Ring Assembled 0-0 Plug 0-0-/4 Plug 0-2 Plug Gasket furnished /2 / / 2 / Hex / Hex / 9 / / Hex /2 2 /2 / 9 / Hex 4-2 Plug / Plug / Plug /4 Plug /4 Plug (Short) / Plug Page / /4 9 / Hex 9/2 / Hex 4
21 PTF 2-Piece Fittings PTF Series Ferruleless Fittings PTF (polytube fitting) terminations do not require ferrules to achieve a secure connection, which makes them easier to use and reuse. PTF fittings are designed for semirigid tubing, i.e., polyethylene, nylon, polyurethane, etc. PTF fittings come standard in brass but can be electroless nickel plated brass at no extra charge. Some part numbers are available in Delrin and all part numbers can be made in stainless steel. Knurled fitting nuts for both Delrin and stainless steel fittings are usually made of brass because the nuts are non wetted parts. Tube to Male Thread - PTF Fittings are now available in polysulfone. Non-wetted knurled nuts are brass. A D Male Part No. Female Part No. Tube Delrin Brass Delrin Brass Flow O.D. NPT 20 PSI 00 PSI 20 PSI 00 PSI A A2 B C D E F F / F / F / / F / / F 26F /4 / F 26F / / F 26F /4 / F 269F / / F 26F /4 / F 26F / / F 26F /2 / F 26F /2 / F 2694F Knurled Nuts Tube Part Number Flow O.D. Brass Thread A B C / /4 20 / / 20 /2-24 /2 206 /-20 Tube to Tube C C B C B B A2 Consult factory for pricing and availability UNF straight threads pressure rating dependent on tubing characteristics A Consult factory for pricing and availability E E Tube Tube Part Number Flow O.D. O.D. Brass A B C Miniature Bulkhead - Female Thread to Tube Part Number HEX A B C (Flow) D Thr'd 009 BK Page 9 D Thr'd C Flow A B A B C Hex Body Jam Nut Hex Nut
22 M x 0. Series Fibre Gasket Supplied / Hex Typ /.0 / / 64 / Small Metric Fittings M B4 / 64 / 4 Hex M-B M-B2 M-B2 /2 M-B M-B4 / 64 / Hex / 64 / 64 2/64 2 /4 Hex 9 / 2 2 / Hex Typ. 9 / 2 2 M-LB M-LB2 M-LB2 /2 MF-LB M-LB M-LB4 6 / " / / / 2.24 Ref / Hex Typ. / Hex.0 /2 /4 M 0. Thd to 0-2 Thd /4 Hex / Hex Typ. M-T M-T2 M-T2 /2 M-T M-T4 M Plain Plug M x 0. to 0-2 (F) Adapter M x 0. / Ref / Hex M6 x Thd M x 0. to M6 x (F) Adapter See complete selection of adapters on pages 2 & 24 M x 0. Series Fibre Gasket Supplied / 4 Hex Typ 29 / / 64 / 64 / / 64 M-B M-B2 M-B2 /2 M-B M-B4 9 /64 2 /64 2 /64 2 9/ 2 / 2 9/ 2 / 2 M-LB M-LB2 M-LB2 /2 M-LB / Hex Typ M-LB4 0 / / / / / 4 Hex Typ / Hex Typ M-T M-T2 M-T2 /2 M-T M-T4 /4 /4 Hex /2 M x 0. 9/2 / Hex 0-2 Thd / 4 / M x 0. / 2 / NPT / 2 Hex See complete selection of adapters on pages 2 & 24 M Plain Plug M x 0. to 0-2 (F) Adapter M x 0. to / (F) Adapter 2 Page 20
23 9 Industrial Way Atkinson, NH 0 Telephone (60) 94- Fax (60) M6 x Series / Hex Typ. / 2 / 2 / 4 / 9 / 2 / 4 / 9 / 2 / 4 / 9 / 2 / 4 / 4 / / M6-B M6-B2 M6-B2 /2 M6-B M6-B4 / 2 / / /2 2 2 /64 /64 /64 9/ 2 9/ 2 9/ 2 /4 Typ / Hex Typ / Hex Typ /4 4 M6-LB M6-LB2 M6-LB2 /2 M6-LB M6-LB /2 M6-LB4 M6-LB /64 Typ 4 / Hex Typ 4 4 M6 T / 9/ 2 / /4 Typ / Hex Typ M6-T M6-T2 M6-T2 /2 M6-T M6-T /2 M6-T4 M6-T See complete selection of adapters on pages 2 &24 /2 / Hex / /2 Hex 2 M6 x / / 4 / 2 / NPT M6 x /2 M6 x / 2 Hex 6 M6 Plain Plug M6 x Male to Female Extension M6 x to / (F) Adapter Page 2
24 Stainless Steel Fittings Any fitting shown in this catalog is also available in Stainless Steel! Ordering Example All of the brass fittings in this catalog are available in stainless steel. 0 stainless is standard; is optional. Passivation, oxygen cleaning, and electro-polishing are also available for your stainless fittings. To order, add the suffix S/S to the brass part number and note any variations from standard. Brass Part Number /4 BK- / 64 / /4-2 / Hex Stainless Part Number /4 BK- S/S / / 64 /4-2 / Hex Typical Stainless Steel Fittings / 2 / 2 / / / / / / 2 / / C S/S L4 S/S T4 S/S RT4-L-4 S/S Note: Mem-co makes a greater variety of female thread-to-tube fittings than any one else in the world! / 2 2 / 2 / 64 2 Typ. / Hex Typ. / /4-2 / Hex 4-2 LB S/S 4-2 T S/S / FLB S/S /4 BK- S/S Mem-co now makes 4 elbows in any combination 4 Hex Stainless Steel Specials No one in the world makes special fittings like Mem-co's. We welcome your requests for specials in brass, aluminum, and stainless steel. We look forward to helping you make the best connections possible! Special stainless steel tube-to-tube manifold / LB6-4 S/S Page 22
25 Telephone (60) 94- Fax (60) Adapters /2 /4 M 0. Thd to 0-2 Thd /4 Hex M x 0. / Ref / Hex M6 x Thd / / 4 M x 0. / 2 / 2 Hex / NPT M x 0. M to 0-2 (F) M to M6 (F) M to / (F) M to 0-2 (F) /2 9/2 / Hex 0-2 Thd 2 9/2 / 4 / Thd / Hex M x 0. Thd / 2 M6 x / BSPT / 2 Hex / 4 / /2 Hex 2 / / NPT / / NPT M6 x 0-2 Thd. / 2 Hex M6 x / 2 Hex M6 x /2 0-2 to M (F) 0-2 to / (F) M6 to / BSPT (F) M6 to / (F) EX-M6 (M-F) / NPT / 2 / 4 / Hex / 9/2 / Ref. / /2 / Ref. / /2 M6 x / /4 / 4.4 Major Dia. M x M x.2 / 2 Hex / NPT M x.2 / 2 Hex /-2 BSPP Parallel 9 M6 to / (F) 4 M to 0-2 (F) M to / (F) M to /-2 BSPP (F) /4 Ref Hex Typ. 2 9 M X 0. Thd / 64 Ref / Hex / 4 9 / / / Hex / NPT 0-2 Thd / 2 2 Ref / NPT / Hex /4 BSPT / NPT /4 BSPT /4 NPT 90 AN / to 0-2 AN / to M /4 BSPT to / (F) /4 BSPT to /4 (F) /2 Typ / NPT Typ /2 Typ 0-2 Typ /2 Hex Typ /4 Typ / Typ /4 NPT Typ 9/ Hex Typ 0-2 Typ /4 Typ / Typ / Typ 9/ Typ 9 /L-0F /LT-0F /T-0F /T-0F x /4L-0F /4LT-0F /4T-0F /4T-0F x Page 2
26 Adapters & Orifice Couplings 90 L Adapters Male to Female A Thd 2 /2 B Thd C Hole Dia. D 2 Part No. M to /FL M to MFL M to M6FL M to MFL M to MFL M to /4-2FL M to 0-2FL M6 to /FL M6 to MFL M6 to M6FL M6 to MFL M6 to MFL M6 to /4-2FL M6 to 0-2FL M to /FL M to MFL M to M6FL M to MFL M to MFL M to /4-2FL M to 0-2FL / to /FL / to MFL / to M6FL / to MFL / to MFL / to /4-2FL / to 0-2FL A Thd Mx.2 Mx.2 Mx.2 Mx.2 Mx.2 Mx.2 Mx.2 M6x M6x M6x M6x M6x M6x M6x Mx0. Mx0. Mx0. Mx0. Mx0. Mx0. Mx0. / NPT / NPT / NPT / NPT / NPT / NPT / NPT B Thd / NPT Mx.2 M6x Mx0. Mx0. / / NPT Mx.2 M6x Mx0. Mx0. / / NPT Mx.2 M6x Mx0. Mx0. / / NPT Mx.2 M6x Mx0. Mx0. / C Dia /2 /64.09 /4 D / /4 /4 /2 Line No Orifice Couplings have through holes drilled to exact diameters specified in inches. Line Number 24 Line Number 2 Line Number 26 MEM / C Orifice Part No..00" C-OR " C-OR-.006 / 4 Typ..00" C-OR " C-OR " C-OR " C-OR-.00.0" C-OR-.0.02" C-OR-.02.0" C-OR-.0.04" C-OR-.04.0" C-OR-.0.0" C-OR-.0.0" C-OR-.0.0" C-OR-.0.09" C-OR " C-OR " C-OR " C-OR " C-OR / 2 C Orifice Part No..00" C-OR " C-OR " C-OR " C-OR " C-OR " C-OR-.00.0" C-OR-.0.02" C-OR-.02.0" C-OR-.0.04" C-OR-.04.0" C-OR-.0.0" C-OR-.0.0" C-OR-.0.0" C-OR-.0.09" C-OR " C-OR " C-OR " C-OR " C-OR-.040 / C4 Orifice.02" Part No. C4-OR-.02 Note: The general dimensions in this catalog are subject to change without notice. Page 24
27 Telephone (60) 94- Fax (60) F Series Brass Barbed Fittings Single barb allows tubing to flow around it. Tapers facilitate assembly. No Undercut Sharp edge bites into tubing High Strength MEM-CO's unique single barb design provides superior resistance to Tubing Pull-Off. Additionally, the threaded fittings are produced without any undercut at the thread base. This results in a fitting with superior strength. The fittings can be locked firmly in place using a thread sealant and can be removed, if necessary, without heating or breakage. Thread Sealant-No Gasket Assembly Any L, T, or X fitting can be aimed in the needed direction, rather than chancing a broken gasket from over-tightening or leakage from under-tightening. Engage the fitting /2 to turn. Apply a drop of Loctite at junction. Tighten fully by hand then back off ( full turn max.) if needed for desired position. Allow the Loctite to cure. Recommended Loctite anaerobic sealants Number Color Approximate Cure time RC/609 Green 6 hours 290 (wicking) Green 2 hours Note: It is recommended that Loctite Primer be used on the male thread before installing. This shortens handling and cure time. Low temperature heat, such as sunshine or heat from a light bulb can also be used to speed curing. Loctite is a registered trademark of Loctite Corp. Use wire or similar object to apply a drop of Loctite. Engage the barbed fitting /2 to turn. Apply a drop of Loctite at junction. Finish threading the fitting into the hole. Allow the Loctite to cure. Flanged Locking Sleeves - Sleeves are packed 00 per package Sleeves quickly and firmly lock /4" O.D. tubing to barbed fittings. Eliminates maintenance problems caused by tubing stretch and enlargement. To install, place sleeve over tubing as shown. Install hose over fitting as usual. Slide sleeve over hose until it covers barbed area of fitting. /4 O.D. Tubing 20 S-4 # and # Barbed Fittings 0-2 /4-2 Hexless Barb Hexless Barb 0-2 # Barb / Hex O'Ring Buna-N O'Ring face seal, installed. # Barb 9/2 Hex Use Thread Sealant. No Gasket Assembly. # Barb Use Thread Sealant. No Gasket Assembly. # Barb O'Ring / Hex Buna-N O'Ring face seal, installed. # Barb Use Thread Sealant. No Gasket Assembly. 2 B-O (Old No. 0-O) 4-2 B (Old No. 4) BA (Old No. 2) B (Old No. 0) BA (Old No. 2) #4 Barbed Fittings 0-2 / NPT Hexless Barb #4 Barb /4 Hex Includes GA-0 gasket. #4 Barb / Hex Page 2 #4 Barb Use Thread Sealant. No Gasket Assembly. B4 (Old No. 04 & 04-) / B4 (Old No. 4) BA4 (Old No. 24 & 24-)
28 F Series Fittings 0-2 Female to Female Fittings - See Thread Sealant-No Gasket Assembly on page 2. Coupling /4" Hex L Elbow /" Square T Tee /" Square X Cross /" Square 020 FL-0 FT-0 FX Male to Female Fittings - See Thread Sealant-No Gasket Assembly on page 2 /4 Hex 0-2 Nipple /4" Hex L Elbow /" Square T Tee /" Square X Cross /" Square 00 ML-0 MT-0 MX-0 / NPT Male to 0-2 Female Fittings 24 L Elbow /" Hex T Tee /" Hex Way /" Hex 4 Way /" Hex /4 NPT Male to 0-2 Female Fittings 2 L Elbow 9/" Hex T Tee 9/" Hex Way 9/" Hex 4 Way 9/" Hex Reducer Fittings 26 / NPT to 0-2; /" Hex / NPT to 0-2; /" Hex /4 NPT to 0-2; 9/" Hex / NPT to 0-2; /" Hex Swivel Fittings - with GA-0 Gasket. 0-2 Plug Gasket for 0-2 Fittings. 00 per package. 2 SFL-0 L Elbow SFT-0 T Tee Material: Plated Steel 0 per package with GA-0 Gaskets Material: /2" Thick Fiber SFL-0 SFT-0 P-0 GA-0 2 Page 26
29 Telephone (60) 94- Fax (60) Tube to Tube Manifold Stainless Steel (Also available in brass) / x /2 wall 04 Stainless Steel Tubing (Scale 2:) 29 Manifold -6x6- (also available in brass) F Series 0-2 Manifold 4 Outlets - / NPT Inlet (Black anodized aluminum).62 ±.00. ± ± ± ± ±.00 0 M-4 F Series 0-2 Manifold 6 Outlets - / NPT Inlet (Black anodized aluminum).62 ±.00. ± ± ± ± ± ±.00 M-6 F Series 0-2 Manifold Outlets - / NPT Inlet (Black anodized aluminum).62 ±.00. ± ± ± ± ± ± ±.00 2 M- F Series 0-2 Manifold 2 Outlets - / NPT Inlet (Black anodized aluminum).62 ±.00. ± ± ± ± ± ± ±.00 M-2 Page 2
30 Manifolds / Male Pipe Thread Manifold Fittings Branches can be arranged in various attitudes in thousands of combinations to accommodate specific requirements. Mem-co s line of Unitized Manifold Fittings is directed primarily at the high volume user who must have a low cost compact zero leak potential neat appearing fitting that requires a minimum amount of labor to install and can be customized to his specific requirements. For smaller volume users Mem-co does carry a limited number of manifold fittings as stock items shown below. Manifold Fitting Nomenclature / M = / Male NPT one end & branch outlets as required /MM = / Male NPT and mixed branches /MV = / Male NPT and 2nd row at 60 either L or R /MMV = / Male NPT w/mixed branches at 60 either L or R /MT = / Male NPT with branches at 0 /MMT = / Male NPT w/mixed branches at 0 /MB = / Male NPT Manifold blank (wall thickness suitable for 0-2 thread) Typ. / 4 4 Tell us what you need Branch sizes are called out in order starting at the threaded end. /MM (Figure ) signifies a mixed manifold / NPT fitting with two #4 branches and three #2 branches in-line. /MM signifies a similar manifold on which the 2nd and rd branches have exchanged positions. In the case of V arrangements, the side having the largest branches is considered to be the vertical side (at 2 o clock); the other side is either to the right or left of vertical as viewed from the threaded end of the fitting. /MMV-44-22L (Figure 2) signifies a V type / NPT manifold fitting with two #4 branches and two #2 branches on each row with the second row to the right as viewed from the threaded end. (Figure ) 4 4 / / 2 / 64 / Hex Typ. / M- or / M-222 / M- / MM Typ. (Figure 2) / 2 Hex Typ. / MT-- / MMV-44-22L / MMV R / Male Pipe Thread Manifold Blanks - will accommodate 0-2 thread Typ. Hex Typ. / MB / / MB -/ / MB -/ Page 2 6
31 Manifolds Manifolds Made From a Variety of Materials Center to Center Outlet Mounting Holes Wd. Inlet Ht. Lg. Brass Inlet Mounting Holes Plastic Stainless Steel Manifold Dimensions (Inches) No. of Inlet Outlet Brass Outlet Mtg. Hole Mtg. Hole Outlets Pipe Size Pipe Size Lg. Wd. Ht. Ctr. to Ctr. Ctr. to Ctr. Size /4 / -/4 / / /4 2-/ -/4 -/4 / 0.20 /2 / 2-/4 -/2 -/ /4 / -/4 /4 -/ / /4 4-/ -/4 -/4 / -/ /2 / 4-/4 -/2 -/ /4 / 4-/4 / / /4 -/ -/4 -/4 / -/ /2 / 6-/4 -/2 -/ /4 / 6-/4 /4 4-/2 0. / /4 -/ -/4 -/4 / -/ /2 / -/4 -/2 -/ /4 / -/4 / / /4 9-/ -/4 -/4 / 0.20 /2 / 0-/4 -/2 -/ How to Order MAN 2 /4 0-2 PVG Part No. Prefix Ordering Example Number of Outlets Inlet Pipe Size (NPT) /4 / /2 MAN6 - / - / - ALN The part number specifies a 6 outlet manifold with / NPT inlet ports and / NPT outlet ports. Outlet Pipe Size (NPT) / /4 / Temperature Pressure Manifold Material Range Max PSI ACN = Delrin Natural -20 to + 0 F 200 ACB = Delrin Black -20 to + 0 F 200 NYL = Nylon -60 to + 00 F 200 P = Polypropylene +2 to + 20 F 0 PLY = Polypropylene Black +2 to + 20 F 0 PVD = PVDF -6 to + 20 F 0 PVG = PVC Gray +2 to + 40 F 0 PWF = PVC White +2 to + 40 F 0 TEF = PTFE -20 to + 0 F 20 ALB = Aluminum - BSPP +00 to F,000 (606 Clear Anodized) ALP = Aluminum - BSPT -6 to + 20 F,000 (606 Clear Anodized) ALN = Aluminum -6 to + 20 F,000 (606 Black Anodized) BR = 60 Brass -6 to + 20 F 2,000 SS0 = 0 Stainless Steel -6 to + 20 F,00 SS04 = 04 Stainless Steel -6 to + 20 F,00 SS = Stainless Steel -6 to + 20 F,00 Page 29
32 Mem-co Makes Specials! -6 Male Thread to Tube Fibre Gasket Supplied.429" / Hex -6 Thr'd. Typical / Hex.429".2" -6B* -6B2* -6B* 6-2 Male Thread to Tube Fibre Gasket Supplied / 4 Hex Typ. 29 / / 64 / 64 / 9 29 / 64 / / 64 /2 Typ. / / Hex 6-2B-0 Not Shown 6-2B* 6-2B2* 6-2B2 /2* 6-2B 6-2B /2 (4mm) 6-2B4 6-2B 6-2B6 6-2B-0 (mm) -2 Male Thread to Tube Fibre Gasket Supplied / 4 Hex Typ. 29 / 64 /2 Typ. 29 / 64 / 64 / 9 29 / 64 / / 64 / / Hex -2B-0 Not Shown -2B* -2B2* -2B2 /2* -2B -2B /2 (4mm) -2B4-2B -2B6-2B-0 (mm) 9 No one else in the world will make the specials that Mem-co Makes! /" male threaad to an extended #6 barbs, stainless steel Stainless steel manifold, four #4 barb tube-to-tube connections Tube-to-tube manifold, #6 inlet to # outlets, electroless nickel plated brass Unique manifold, /2" male inlet to nine #2 barbs, electroless nickel plated brass Special manifold, /" female inlet, two 0-2 female outlets, six # barb outlets, and one #0 outlet; electroless nickel plated brass Page 0 PTF Series, /4" male thread (Delrin ) to tube (brass) May we help with your special requirements?
33 Special Socket Set for Mem-co Threaded Fittings Benefits - Packed in a transparent case of extra strength K resin, these are the correct tools for a faster and safer way to install Mem-co threaded fittings - especially the elbows and tees. Mem-co socket sets are manufactured with unique cut-outs to clear the barbed branches. Using these special sockets not only speeds assembly, but also reduces the chance of damaging the branches as might happen when open-end or adjustable wrenches are employed in assembly. These sockets also reduce the tendency to neglect that final little extra torque that ensures a tight seal. A shallow socket depth prevents any downward force being applied to a branch. Five sizes are included in the set as follows: /4 Hex 6 point /4 drive / Hex 6 point /4 drive / Hex 6 point /4 drive 9/ Hex 6 point / drive / Hex 6 point / drive 40 Order Model No. SWS Demountable Cylinder rod alignment compensators (Patented)rs A low cost coupler for small bore cylinders having threaded rods 0-2 thru /-24 Benefits MEM-CO s compensator is DEMOUNTABLE, i.e. should it be necessary to remove the driven section or cylinder for servicing it is not necessary to detach our compensator. It merely slips apart thus maintaining original settings and adjustments. This feature is especially valuable in small air press applications where quick set up changes are needed. It reduces wear on bearings due to misalignment of machine elements and cylinder shaft. It prevents power loss in small cylinders caused by poor alignment or direction of machine components. This power loss can be a significant portion of total power of small cylinders. Incorporating MEM-CO s compensators in machine design allows more flexibility in tolerances and choices of cylinder mounting. BODY Specifications Angular movement: in any direction or a total of 6 Axial movement is a total of.020 Material is heat treated steel Thread sizes available: 0-2 /4-2 /-24 Thread depth / Combined length -/ Dimensions shown are the same for all thread sizes / WRENCH FLATS / / PLUNGER /4 /2 4 Model Number Thread Size RAC Model Number Thread Size RAC /4-2 Page Model Number Thread Size RAC24... /-24
34 Multiple Port Rotary Valve (Patented) Methods of Actuation Manual operation the external actuator may be a knob or hand wheel attached to valve shaft. Remote operation an air or hydraulic cylinder or solenoid can index the valve via a ratchet mechanism attached to the valve shaft. Mechanical operation a cam on the main machine actuates the ratchet mechanism on the valve shaft. How it works Rotating the external actuator one position (clockwise or counterclockwise) directs air pressure to the next outlet port at the front of the unit. All other outlet ports are open to atmosphere. Thus, in the illustration above, a single acting cylinder can be actuated by connecting its port to any of the valve outlet ports. A double acting cylinder can be operated by connecting its ports to any two of the valve outlets. If connected to two adjacent outlets, the cylinder will open and close immediately on the next advancement of the actuator; if connected to nonadjacent outlets, the cylinder s extend/retract cycle can be sequenced with other operations controlled by the valve. Manual Operation Side view panel mounted rotary valve is shown with knob attached to valve shaft. Valve is indexed by hand through 0 or 20 outlet ports depending on valve model. Remote Operation Front view base mounted Air Outlet Typ. Air Supply Inet Linear Actuator Rear view base mounted Ratchet Mechanism Actuator can be cylinder, solenoid or cam device General Use As a panel mounted selector valve for remote control of pneumatic cylinders, valves or other devices. As a programmer for automatic machinery, (lathes, drilling machines, winders, etc.). As an IMPLANT in a large machine to supply sequential control where indexing is accomplished by some moving part of the machine. As a sampling device whereby a vacuum is employed to draw a sample of air from a controlled atmosphere area to a central analyzing station, and/or to check atmospheric pressure. Units may be coupled in tandem (requires special shaft), or in series; i.e. a port on first unit is connected to actuator device on second unit and a port on second unit is connected to actuator on third unit, etc., etc. In this fashion an infinite number of counts may be obtained. MODEL GV2-0 with 0 outlet ports is shown mounted on an angle bracket attached to machine base. An air or hydraulic cylinder, a solenoid, or a cam on the main machine can index the valve via a ratchet mechanism attached to the valve shaft. General Specifications Model GV2-0/Model GV20 Number of outlet ports GV2-0 (0 outlets) GV2-20 (20 outlets) Outlet & Supply Ports 0-2 thread Air flow. CFM at 00 psi to atmosphere Detent Spring loaded ball plunger Rotation left or right Operating pressure range 0 to 2 psi Shut-off occurs between any two ports ( from detent) Materials Body Aluminum Rotor Steel Port cap Steel Shaft /" diameter steel Bearings Ball Seals Standard Buna N O Ring General valve dimensions GV2-0: 2-/" dia. x -/" long Shaft extension " Mounting Four /2" tapped holes on.90" bolt centers GV2-20: -/" dia. x -/" long Shaft extension " Mounting Four /2" tapped holes on 2.00" bolt centers Servicing One 9/64 hex wrench field strips valve for servicing. Available Options. Basic valve (no actuator parts) 2. Basic valve with ratchet mechanism. Basic valve mounted to " x " aluminum base plate with ratchet mechanism and air cylinder 4. Basic valve with knob Model Number 6 Outlets GV2-6/6 Model Number 0 Outlets GV2-0/0 Model Number 20 Outlets GV2-20/20 42 Page 2
Miniature Pneumatic Components
Miniature Pneumatic Components Perfecting miniature pneumatic products for over 30 years PNEUMADYNE CAPABILITIES Perfecting miniature pneumatic products for over 30 years Pneumadyne, Inc. is your source
More informationMINIMATIC CONNECTOR FITTINGS
MINIMATIC CONNECTOR FITTINGS 15453 Male 10-32 Coupling.062 dia. - thru.342 Material: Stainless steel Thread: 10-32 Seals: Loctite necessary Use: Excellent for a surface to surface connection of female
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationValves, Fittings, and Manifolds Catalog. We make things MOVE
Valves, Fittings, and Manifolds Catalog We make things MOVE We Make Things Move A forward-thinking innovator, Bimba provides industry-leading pneumatic, hydraulic and electric motion solutions that are
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationMINIMATIC FITTINGS. Push-Quick Fittings. Quick Connect Fittings. Clippard Instrument Laboratory, Inc. (513)
MINIMATIC FITTINGS Clippard Instrument Laboratory, Inc. (513) 521-4261 www.clippard.com Push-Quick Fittings 325-329 Slip-On Fittings 330-335 Brass Fittings 336-347 Quick Connect Fittings 348-353 Fittings
More informationLubrication Installation Components, Accessories & Fittings Table of Contents
Lubrication Installation Components, Accessories & Fittings Table of Contents Lubrication Fittings & Accessories: Introduction............................................. 2 Threaded Fittings........................................
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 0105 BSPT Page 5-9 0105 NPT Page 5-9 0101 BSPP/Metric Page 5-10 0101..39 BSPP Page 5-10 0101 Metric Page 5-11 01 BSPP Page 5-11 0109 BSPT Page 5-12 0109
More informationCompression Fittings. Brass Compression Fittings. Stainless Steel Compression Fittings. PL Nickel-Plated Brass Spigot Fittings
Compression Fittings Compression Fittings Stainless Steel Compression Fittings PL Nickel-Plated Spigot Fittings Compression Fittings Compression Fittings Compression Fittings (P. 5-5) Stainless Steel Compression
More informationBrass Compression Fitting Range
Compression Fitting Range Fittings Stud Fittings 05 BSPT Page 5-9 05 NPT Page 5-9 01 BSPP/Metric Page 5-01..39 BSPP Page 5-01 Metric Page 5-11 0114 BSPP Page 5-11 09 BSPT Page 5-12 09 NPT Page 5-12 0199
More informationControl Valves & Valve Accessories
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Stainless Steel 0- Fully Ported valve with M5 threads available- contact factory Viton is a registered trademark
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More informationClippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
More informationFIT-2. Inch. Ø Â" to Ë" O/D tube
For simple and quick assembly of pneumatic circuits. Positive tube connection. Wide range of types available. Reliable and corrosion resistant. Specifications Fluid: Compressed air, nitrogen, inert and
More information3 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO
Flow Control Valves NPTF NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Composite Right Angle Flow Control Valves NPTF/Inch Series TMCU, TMVU, TMCO Swivel Design: Meter-Out, Meter-In
More information1/8 NPT (F) 1/8 NPT (F)
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 400 Phone 76-559-077 Fax 76-559-0547 Features l Compact size (.5 OAL) l 4 Porting configurations l High flow l Single stem design l Plumbing
More informationQuicklub Lubrication Systems
Fittings, Adapters and Accessories Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 246416 Valve mounting bracket 51304 ¼" nylon locknut for valve mounting 247023 Grade 8, ¼" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 10 and
More informationTugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
More informationManifolds. 4 Inline 4 Dual Air 4 Junction Blocks 4 Terminal Blocks 4 Aluminum, Brass, Stainless Steel, Nylon & Polypropylene
Providing System Solutions for Fluid Control Control Valves 4 -Way, 3-Way & 4-Way Valves 4 Pressure Regulators, Flow Controls & Needle Valves 4 Variety of sizes & configurations 4 Anodized or Electroless
More informationFLOW CONTROL VALVES & ACCESSORIES
TECHNICAL SPECIFICATIONS construction Valve group Materials Mounting Ports Position Operating temperature PNEUMATIC DATA Operating pressure Nominal pressure nominal flow needle-type Meter In, Meter Out,
More informationQuicklub Lubrication Systems Fittings, Adapters and Accessories
Divider Valve Mounting Accessories 24646 Valve mounting bracket 5304 4" nylon locknut for valve mounting 247023 Grade 8, 4" valve mounting bolt 239499 Template for divider valve mounting (6, 8, 0 and 2
More informationThe following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
More informationRecoil Hose. Polyurethane. Recoil Hose. Hytrel Recoil Hose BENEFITS SPECIFICATIONS ORDERING INFORMATION BENEFITS SPECIFICATIONS ORDERING INFORMATION
Polyurethane Recoil Hose Greater durability than Nylon or Hytrel recoil hoses due to exceptional wear characteristics Longer life expectancy due to kink resistant properties Superior recoil memory due
More informationMale stud fittings. Male stud elbow. Fluid... Working pressure... Vacuum level... Rated temperature...
FITTINGS Push - in fittings 431 Series Fluid... Working pressure... Vacuum level... Rated temperature... Torque... Standards... Materials... Compressed air Max. 20 bar (290 psi) 55 mm Hg vacuum (99 %)
More informationPerformance Data. Temperature Range. -20 o to 160 o F 26 Hg to 125 psi. C v Flow Rate (scfm) Fill Time Exhaust. Port.
Control Valves & Valve Accessories PNEUMADYNE, INC. Catalog 00 Phone 76-559-077 Fax 76-559-0547 Features Single stem design Compact size Four input options Numerous porting configurations Fully ported
More informationAirflex Rotorseal Description
Airflex Rotorseal The Airflex rotorseal is a rotary union (rotary joint) which permits the transfer of gases or liquids, under pressure or vacuum, into or out of the exposed end of a rotating shaft or
More informationForm No Parts List for: RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW SECTION A-A
Parts List for: Form No. 000339 RWP55 RWP55-4 MODEL C HYDRAULIC PUMP AIR DRIVEN WITH REMOTE CONTROL GENERAL ASS'Y SIDE VIEW 3 9, 0 4 5 6 6 5 4, 3 9,0 SPX Hydraulic Technologies, Rockford, IL 609 USA powerteam.com
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationLF 3600 Push-In Fittings Range
LF 300 Push-In Fittings Range Stud Fittings Straights 375 BSPT Page 1-97 301 BSPP/Metric Page 1-97 31 Metric Page 1-97 31 BSPP/Metric Page 1-9 321 BSPT Page 1-9 331 BSPP/Metric Page 1-9 300 Page 1-9 Push-In
More informationLubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
More informationMultiple Nozzle Body Assemblies for Dry Booms
Multiple Nozzle Body Assemblies for Dry Booms QJ350 Compact Nozzle Body for Dry Booms n Compact design means easier mounting and less interference with boom structure. n Available with 3 or 5 spray positions
More informationLITTLE SOIL SQUIRT. RF809-4 LITTLE SOIL SQUIRT (Completely assembled unit) $ (Weight 110 Pounds) Effective February 17,
LITTLE SOIL SQUIRT RF809-4 LITTLE SOIL SQUIRT (Completely assembled unit) $1800.00 (Weight 110 Pounds) INCLUDES: 12-volt ½ HP explosion-proof motor #0-4814 $600.00 See page 2 #4001N-A Hypro Pump $253.00
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationMarine Generators Marine Diesel Engines Land-Based Generators
P1066 For Models: L1066T, L1066A, L1066H, M1066T, M1066A1, M1066A2, M1066A3, M1066H, M1066TMCA, NL1066T, NL1066H1, NL1066H2, NL1066H3, NL1066H4, and M99C2 PARTS CATALOG Marine Generators Marine Diesel
More informationPLC SERIES. Specifications
Actual size Specifications Pressure: Vacuum to 120 psi, 8.3 bar Temperature: -40 F to 180 (-40 C to 82 C) Materials: Main components and valves: Acetal Thumb latch: Stainless steel Valve spring: 316 stainless
More informationPneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: Fax:
COMPANY Pneumatic and Electronic Motion Control Distributor AIROYAL COMPANY airoyalcompany.net Ph: 973-761-4150 Fax: 973-761-5731 Quick Valves Disconnect Table of Contents Index Table of Contents Ball
More informationModel SMA3-A SLUDGEMASTER
SERVICE AND OPERATING MANUAL Model SMA3-A SLUDGEMASTER PLEASE NOTE! The photos shown in this manual are for general instruction only. YOUR SPECIFIC MODEL MAY NOT BE SHOWN. Always refer to the parts list
More informationPort Flow Rate/ Function Series Actuators Page Number Size Factor
Section dex Port Flow Rate/ Function Series Actuators Page Number Size Factor 0- Cv = 0.05 Way Modular Solenoid. -. & to Way Manifold /8 NPT Cv = 0. Way, Position Modular /8 NPT Cv = 0.05 Way Hex Solenoid.5.6
More informationPMC SERIES. Specifications PMC SERIES
Actual size Specifications Pressure: Vacuum to 120 psi, 8.3 bar Temperature: -40 F to 180 F (-40 C to 82 C) Materials: Main components and valves: Acetal Thumb latch: Stainless steel Valve spring: 316
More information$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
More informationONE TOUCH FITTINGS Series WP2
ONE TOUCH FITTINGS - M5 1/ 1/ 3/ 1/2 Features Attractive design Compact size ed nipples of L, T & Y fittings enable plastic portion to turn by 30º Full area of the inner bore of the tubing is available
More informationPneumatic Connector, Tubing, and Accessory Catalog
Pneumatic Connector, Tubing, and Accessory Catalog Pneumatic Quick Connectors Plastic Tubing and Adaptors Tube Connectors and Manifolds Plumbing Tools Contents Plastic Tubing 1 Plastic Tubing Specifications
More informationPaint/Solvent/Dump Valve and Flow-Through Valve
Instruction Sheet P/N 08573D Paint/Solvent/Dump Valve and Flow-Through Valve. Description See Figure. The paint/solvent/dump valve is a normally-closed valve that opens to trigger and/or dump coating material.
More informationPneufit Inch Series Push-In Tube Fittings 1/8" to 1/2" Tube Sizes UNF to 1/2" NPT Thread Options
Section 1 Pneufit Inch Series Push-In Tube Fittings to 1/2" Tube Sizes 10-32 UNF to 1/2" NPT Thread Options Inch Series Product Numbering System..................FIT-1-2 Inch Series Shapes and odes.........................fit-1-3
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More informationNon-Spill, High Flow, Polypropylene Quick Disconnect Couplings
Non-Spill, High Flow, Polypropylene Quick Disconnect Couplings U.S. Patent 4703957, others pending. CPC s patent-pending NS4 Series quick disconnect couplings feature non-spill valves in a compact size,
More informationSPEED CONTROLLERS WITH QUICK FITTINGS
SPEED CONTROLLERS WITH QUICK FITTINGS Union Straight Type Fittings for controlling the speed of actuators, such as cylinders. Superior flow rate characteristics and fine tuning adjustments in the low flow
More informationLubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
More informationMARCH Polyethylene Piping Systems.
MARCH 2017 Polyethylene Piping Systems www.plasson.com.au GLOBAL PRESENCE LOCAL COMMITMENT Get an expert on your team. Plasson has the widest range of compression, electrofusion, threaded and transitional
More informationKEY FEATURES. Compact components for 360 µm, 1/16, and 1/32 inch ID tubing Fast, breadboard-based design Leak-free high pressure setups
CapTite Microfluidic Construction Kits KEY FEATURES Compact components for 360 µm, 1/16, and 1/32 inch ID tubing Fast, breadboard-based design Leak-free high pressure setups Routing fluids can be one of
More informationFunction Fittings. Flow Control Regulators. Piloted Function Fittings. Non-Return Valves. LIQUIfit Pressure Fittings. Other Function Fittings
Flow Control Regulators Piloted Non-Return Valves LIQUIfit Pressure Fittings Other Silencers Flow Control Regulators (P. 4-6) Blocking Fittings (P. 4-36) Piloted Non-Return Valves (P. 4-38) Function:
More informationSeries 11 Miniature Pneumatic Solenoid Valve 15mm Solenoid Valve
Series 11 Miniature Pneumatic Solenoid Valve 15mm Solenoid Valve Typical Applications Oxygen Conservers Oxygen Concentrators Compression Therapy Gas Chromatography Insufflators Medical & Analytical Gas
More informationPLC SERIES. Specifications PLC SERIES
Actual size Specifications Pressure: Vacuum to 120 psi, 8.3 bar Temperature: -40 F to 180 (-40 C to 82 C) Materials: Main components and valves: Acetal Thumb latch: Stainless steel Valve spring: 316 stainless
More informationDixon Sanitary General Products. dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTU General Products dixonvalve.com Customer Service: 877.963.4966 : maintaining the standard of quality The
More informationEvans SN Series. Evans. Sanitary & Vacuum Ball Valves
SN Series Sanitary & Vacuum Ball Valves SN Series 1/2-4, DN/ISO 8 thru ISO 100 Sizes True Bore Design Cavity Free PTFE Seats Live Loaded Stem Seal ASME/BPE Compliant SF1 Standard Surface Finish The SN
More informationParker Autoclave Engineers: Fluid Components Product Catalog. February Valves, Fittings and Tubing. Pressures to 150,000 psi (10,000 bar)
Parker Autoclave Engineers: Fluid Components Product Catalog February 2013 Valves, Fittings and Tubing Pressures to 150,000 psi (10,000 bar) Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock 1 1/8, 1, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationSwagelok Alternative Fuel Ser vice (AFS) Ball Valves
www.swagelok.com Swagelok Alternative Fuel Ser vice (AFS) Ball Valves For High-Pressure, High-Flow Applications Swagelok AFS Ball Valves Working pressures up to 6000 psig (413 bar) Flow coefficients (C
More informationMiniature Multimedia Valves
2 Inert Isolation PTFE 3-Way Solenoid Valve Series 1 The Series 1 diaphragm type valve has a low internal volume and rapid response time, which enables users to get readings quickly for their analysis.
More informationPressure Sensor No Series
Sales Manual Section 335 PRODUCT SPECIFICATION 84372 SERIES Pressure Sensor No. 84372-Series GENERAL DESCRIPTION The patented* No. 84372-Series Pressure Sensor contains a weatherproof, snap-acting valve
More informationCALIFORNIA Proposition 65 Warning:
PARTS MANUAL P1064 For Models: L1064D, L1064A, M1064D, M1064T1, M1064T2, M1064A, M1064H, NL1064D, NL1064T1, NL1064T2, NL1064H1, NL1064H2, M40C2, M55C2, & M65C2 CALIFORNIA Proposition 65 Warning: Diesel
More informationPARTS ORDERING INFORMATION
RP-268 REPAIR PARTS FOR VE268 Roll Grooving Tool PARTS ORDERING INFORMATION When ordering parts the following information is necessary for the Victaulic Tool Company to promptly process the order and send
More informationSpeed Controller with One-touch Fitting
Speed Controller with One-touch Fitting Series Elbow Type Reduces labor time! Elbow Brass Stainless steel Electroless nickel plated Stainless steel 33 RoHS TMH y Easo t e us Push-lock type Larger handle
More information450FB and 460FB Flow Back Manifolds
450FB and 460FB Flow Back Manifolds The 450FB and 460FB flow back valves allow pressure from the boom lines to be relieved back to the tank when the valve is switched to the off position. Available with
More informationLF 3600 Push-In Fittings
LF 300 In order to meet your technical and environment requirements, Parker Legris designed this range of metal fittings, offering robustness, reliability and resistance to industrial fluids for the most
More informationSection Title Page. 1 INTRODUCTION Scope of this manual Applicability Parts list 1. 2 QDP AND iqdp40 PUMP ASSEMBLY 2
CONTENTS Section Title Page 1 INTRODUCTION 1 1.1 Scope of this manual 1 1.2 Applicability 1 1.3 Parts list 1 2 QDP AND iqdp40 PUMP ASSEMBLY 2 3 QDP AND iqdp40 GAS ASSEMBLY 9 4 QDP AND iqdp40 WATER ASSEMBLY
More informationLIQUIfit Push-In Fittings with Metal Adaptors
LIQUIfit Push-In Fittings with Metal Adaptors The LIQUIfit range now benefits from a range extension of metal adaptors designed for liquid transfer applications. These fittings ensure reliable and compact
More informationComposite Push-In Fittings BSP/Metric Series 7000
2 Composite Push-In Fittings BSP/Metric Series 7000 NORTH AMERICAN FITTINGS & FLOW CONTROL VALVE CATALOG > Release 8.6 Tube Diameter OD: 4, 6, 8, 10, 12, 16 mm Thread Type: metric (M5, M7), BSP (G1/8,
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationAir & Water Manifolds - General Information
Air & Water Manifolds - General Information Rugged, Quick Connect, External Manifolds Offer You Exceptional Convenience, Cost, and Production Advantages FEATURES: Color Coded - Hoses and Manifolds are
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationQUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
More informationSeries 900 Minifolds. Aluminium Air Distribution Manifolds. Manifolds & Minifolds. Technical Specifications. hnl-uk.com. Series 900 Minifolds
Series 900 Minifolds Aluminium Air Distribution Manifolds Replace complex assemblies of valves and fittings with anodised aluminium MINIFOLDS., OR 20 OUTLETS COMPREHENSIVE RANGE ALSO AVAILABLE IN 36 STAINLESS
More informationMiniature Regulator. Standard Specifications. Model IN side OUT side (Applicable tubing O.D.) Proof pressure Maximum operating pressure
Miniature Regulator Series 00F Compact and lightweight ( g) Low cracking pressure 0.0 MPa Standard model equipped with backflow function Standard Specifications Port size Fluid side side (Applicable tubing
More informationSMA Aluminum Cylinders
SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering
More informationModel SLUDGEMASTER SMA3-A
SERVICE AND OPERATING MANUAL Model SLUDGEMASTER SMA3-A OPERATING INSTRUCTIONS This pump has been tested prior to shipment from factory. The oil reservoir has been partially filled at testing with air motor
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of D.O.T. FMVSS 571.106 Meets Dimensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor costs
More informationLow Flow Air Atomizing
XA Low Flow Air Atomizing TO DER: specify pipe size, body style, spray set-up #, 76 The XA nozzle system uses the energy in compressed air to produce highly atomized sprays at low flow rates. There are
More informationFITTINGS, CONTROLS AND ACCESSORIES
, CONTROLS AND ACCESSORIES Regardless of your application, Norgren has fittings and accessories to complete your pneumatic package. Norgren has an extensive lineup of Pneufit push-in fittings in metric
More informationTable of Contents. SeaTechInc.com
Table of Contents 1-2 Technical Information 3 Tubing for 35 Series 4-5 10 Series Fittings 6-11 35 Series Fittings and Valves 12 35 Series Quick Connect Manifold, Configuration Styles 13 35 Series Quick
More informationSERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
More informationSpeed Controller High Flow
http://www.pisco.co.jp CONTROLLER VALVE TUBE MAKE-TO-ORDER PRODUCTS Speed Control Valve for High Speed Cylinder High Flow Speed Control Valve for Actuator. High Flow Type with Same Size as. Suitable for
More informationSpeed Controller with Uni One-touch Fitting Push-lock type. New-stand male threads for piping that reduces the screw-in time by 1/3. Model.
Speed Controller with Uni One-touch Fitting Push-lock type Series Elbow Universal Brass New-stand male threads for piping that reduces the screw-in time by 1/3. Gasket Female thread Rc, G NP, NPF Shape
More informationpackless valves Packless Valves Index Bellows & Diaphragm
Packless Valves Bellows & Diaphragm Index 0300 Series (Bellows) 1 4100 Series (Bellows) 4 4200 Series (Bellows) 8 4500 Series (Bellows) 11 4600 Series (Diaphragm) 13 DV1 Series (Diaphragm) 17 HOKE Inc.
More informationConnecting Rods External Thread
Power Transmission Connecting Rods External Thread Round Double End External Right Hand Threads Steel and Aluminum Coarse and Fine Threads ROD DIAMETER RIGHT HAND THREAD LENGTH OVERALL LENGTH RIGHT HAND
More informationEVP SERIES PROPORTIONAL CONTROL VALVES
EVP SERIES PROPORTIONAL CONTROL VALVES 207 Clippard is pleased to add the EVP series proportional control valve to our electronic product line. This product combines the features of the existing EV series
More informationDouble Acting & Spring Return. SERIES 92/93 Rack & Pinion PNEUMATIC ACTUATOR. The High Performance Company
PNEUMATIC ACTUATOR SERIES 92/93 Rack & Pinion Double Acting & Spring Return The High Performance Company SERIES 92/93 Styling, strength, compactness, and simplicity of design have been combined to produce
More informationCUP ACCESSORIES SECTION 4 FLOW VALVES, CHECK VALVES, MECHANICAL VALVES, SWIVEL JOINTS, & TEE ADAPTORS EDCO USA.
CUP ACCESSORIES SECTION FLOW ALES, CHECK ALES, MECHANICAL ALES, SWIEL JOINTS, & TEE ADAPTORS 0 EDCO USA. www.edcousa.net : CUP ACCESSORIES CONTENTS DUAL FLOW ALE TRI-FLOW ALE FLOW SENSOR ALE RELEASE CHECK
More informationEISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI
2 Quality solutions - Made by EISELE EISELE IS QUALITY MADE IN GERMANY AVAILABLE ON STOCK IN GRAND RAPIDS, MI Over 30 patents, more than 8,000 standard articles, and 2,000 customized solutions impressively
More informationSECTION FIVE INDUSTRIAL LUBRICATIONFITTINGS
INDUSTRIAL LUBRICATIONFITTINGS Threaded/Drive Carbon Steel/Monel/Stainless Steel Standard/Metric Specialty Vents/Breathers Couplers Accessories 82 Alemite Product Catalog As the inventor of the Zerk fitting,
More informationMicroCoat System Operating Manual MC4000 Series MC785M, MC785M-WF Spray Valves
MicroCoat System Operating Manual MC Series MC785M, MC785M-WF Spray Valves A NORDSON COMPANY Introduction The MicroCoat System provides precise lubrication control for metal stamping operations. The MC
More informationTubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings
Tubing Size 1/8-1/4 1/8 Flow Chrome Brass 20CB Series Couplings Produced in food grade chrome plated brass, these 1/8 flow size couplings are more durable and withstand higher pressures. They are available
More informationDriMaster III HiFlo Upholstery Tool Owner s Manual
DriMaster III HiFlo Upholstery Tool Owner s Manual Model 000-163-220 HydraMaster / U.S Products 11015 47 th Avenue West Mukilteo, Washington 98275 MAN-45985 Rev. 0, January 31, 2014 (000-182-102) No part
More informationLincoln installation components, accessories and lubrication fittings
Lincoln installation components, accessories and lubrication fittings People, capabilities and systems to save money and increase productivity Industry leader Continually satisfying our customers with
More informationMicroCoat. System Operating Manual MC2000 Series. MC785, MC785-WF Spray Valves. US: UK: Mexico:
MicroCoat System Operating Manual MC2 Series MC785, MC785-WF Spray Valves A NORDSON COMPANY US: 8-498-8865 UK: 8 585733 Mexico: 1-8-556-3484 Introduction The MicroCoat System provides precise lubrication
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More information