Aluminum Machining End mill
|
|
- Brenda Jefferson
- 5 years ago
- Views:
Transcription
1 1/9 Aluminum Machining
2 /9 TaeguTec has launched its new AUMI that delivers improved performance over its predecessor, the AES type end mill, when machining aluminum. The new AUMI has a remarkably strong core diameter that ensures maximum rigidity of the cutting edge. This enables the AUMI to operate at extremely high speeds and feeds while delivering exceptional chip evacuation. Moreover, the enhanced vibration dampening properties compared to the existing AES type end mill achieve higher productivity levels and improved tool life. In comparison to the standard endmill product (standard & long type), the new cutter with a corner radius endmill can now be applied to mid length (M type) machining applications. FEATUES Thanks to an enlarged core diameter, AUMI can effectively eliminate vibration and improve rigidity, while delivering smooth chip evacuation during high feed machining AUMI entails excellent surface finish and wear resistance due to the application of submicron grade. AUMI can be employed for broader range of applications due to added line-up. AES..., AES 3... (regular type) AES 3...M (medium length type) AES...X, AES 3...X (extra long type) AES , AES (corner type) Existing Enlarged Core Diameter Improvement Improved end mill rigidity reduces vibration Eliminates risk of sudden cutting edge chipping and breakage Full radius Corner Type elical S-gash (Smooth cutting)
3 3/9 AES 3...M Type A 9 PM S 1 15º D d 1 Type AES 3030M B 3040M B 3050M B 300M A 3070M B 3080M A 3090M B 3100M A 310M A 3140M B 310M A 3180M B 300M A
4 4/9 AES Type A Type D d 1 AES B B B B B PM B B B TT1040 B B B A B A B A B A B B B A B B B A 40 M
5 5/9 AES Type A 9 PM S 1 TT1040 D d 1 Type AES B B B B A B A B A B A B B B A B A A
6 /9 AES...X Type A º 30 Type 40 D d 1 AES Z00X B Z030X B Z040X B Z050X B Z00X A PM Z080X Sharp emoval A Corner Corner Z100X Corner Sharp Edge Chamfer A Z10X A Z10X TT1040 A Z00X A M AES 3...X Sharp Corner Type A emoval Sharp Edge Corner Corner Chamfer 9 PM S 1 15º TT Type D d 1 AES 300X A 3080X A 3100X A 310X A 310X A 3180X PM B 3180X(80X150) B 300X A 300X(80X150) TT1040 A 50
7 7/9 AES h5 30 D d AES PM TT M
8 8/9 AES h D d AES PM TT
9 9/9 ecommended Cutting Conditions AES / AES... / AES...X PM: rev/min, Feed: mm/min Material (< Si 4%) (< Si 8%) (Die Casting) (Cu based) Diameter PM Feed PM Feed PM Feed PM Feed Ad: 1.5D educe feed by 30% for AES...X, AES 3...X d: 0.3D AES... PM: rev/min, Feed: mm/min Material (< Si 4%) (< Si 8%) (Die Casting) (Cu based) Diameter PM Feed PM Feed PM Feed PM Feed D educe feed by 30% for AES...X Ad: 1.0D
Coated. Carbide APMX LF. Dimensions (mm) Stock Cutting diameter
AURORA ASM 000DL Type ing Corner Groove Milling Groove Finishing Face Milling Spot Facing Helical Milling Ramping Tempered Die Hardened Ti Heat Resistant Cast ron Grhite 30 0.040 0.060 Groove Milling (
More informationAQUA DRILL EX FLAT SERIES
AQUA DRILL EX FLAT SERIES NEW DRILLING TECHNOLOGY CELEBRATE THE POLE POSITION NEW AQUA EX COATING long tool life, by improved heat and wear resistance AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular,
More informationAQUA Drill EX FLAT Series New Drilling Technology
AQUA Drill EX FLAT Series New Drilling Technology New Sizes Expanded to 7 Type 1028 sizes Oil Hole, Long Shank series expands the applications AQUA Drill EX FLAT Series AQUA Drill EX FLAT, Regular, Long
More informationEPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life
EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing
More informationHigh-performance milling cutter NB-NVD NEW X-GENERATION
High-performance milling cutter NB-NVD NEW X-GENERATION TITANIUM MID - RANGE STEELS STAINLESS STEELS MILD STEELS NICKEL ALLOYS Universal High-Performance with a double-groove and variable helix The NB-NVD
More informationSpecializing In High Performance Solid Carbide Cutting Tools
Specializing In High Performance Solid Carbide Cutting Tools High Performance Products For Shops That Seek Productivity SERIES 156 VAR-A-TECH SERIES 101 ROUGHER SERIES 191 PRO-4 Vol. 0213 Series 110 for
More informationJanuary /9. New Cutter with Strong Insert
1/9 New Cutter with Strong Insert 2/9 New cutter with strong insert FEATURES Higher insert thickness, stronger screw systems for heavy or demanding applications Exceptional performance at very high feed
More informationA + Endmill. Endmill Series for Aluminum Machining. Optimized Solutions for Each Application Type. Higher Machining Efficiency
Endmill Series for Machining Endmills for rough, medium to finish cutting of aluminum Optimized Solutions for Each Application Type A wide selection of tools provided for various machining processes Higher
More informationEPP Series. High Performance, High Reliability Square & Corner Radius End Mills FEATURES
4 EPP Series Performance, Reliability Square & Corner Radius End Mills FEATURES Extremely rigid design and thin coating layer provide highly accurate finishes Improved flute design provides exceptional
More informationCarbon Steel. Pre-hardened Steel. Tempered Steel Die Steel. Coated. Carbide. Alloy. Steel. DMM h6 DC. Dimensions (mm) Stock Cutting diameter
for Exotic s Anti-vibration Type SSEHVL 000W-R Type ing Side Milling Groove Milling Groove Finishing Face Milling Profile Milling Hardened 5 to 55 55 to 60 60 to 65 HRC HRC HRC Carbide Carbon Pre-hardened
More informationBridging the gap... R40 UNI SPM DRILLS. with carbide drills. for an on-site demonstration contact Sutton Tools on
Bridging the gap... with carbide drills R40 DRILLS for an on-site demonstration contact Sutton Tools on 1800 335 350 100% Australian Owned The 130 four facet point with a web profile grind combined with
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B39. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.9 Update B233G Solid Carbide Flat Bottom Drills Series Item Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationCoatings: AlTiN TiCN TIN None (MG) Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options.
4-FLUTE END MILLS 4 Helical Flutes For profiling, slotting, & contouring Coatings: TIN None () Any PVD coating may be applied to an uncoated tool in this series. See page 162 for coating options. d2 d2
More informationCarbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides -
CARBIDE ENDMILLS Carbide Endmills High performance solutions - Solutions for slotting, finishing, roughing & profiling - Micro & Ultra fine grain type carbides - Various shank styles to suit your needs
More informationHigh-performance milling cutter NX-NVD NEW
High-performance milling cutter NX-NVD NEW Universal high performance with a double groove and variable helix [ 2 ] The NX-NVD high-performance milling cutter with patented double groove geometry and variable
More informationNHD - Improved Solid Carbide Drill
February 2016 1/12 NHD - Improved Solid Carbide Drill 2/12 KEY POINT TaeguTec is pleased to introduce a new solid carbide drill - NHD Drill - which is an improved line over the existing SHD and SHO drills
More informationDrills Jobber, R40 UNI
Drills Jobber, - offers superior performance - for longer tool life 0955 9.55 133 87 10 D168 0955 0960 9.6 133 87 10 D168 0960 0970 9.7 133 87 10 D168 0970 0980 9.8 133 87 10 D168 0980 0990 9.9 133 87
More informationALU-XP E T. The Alu-XP range: Exceptional performance and reliability.
The Alu-XP range: Exceptional performance and reliability. At Europa Tool we recognise that manufacturing components consistently and cost effectively is essential. To this aim, we have produced all data
More informationEnergy Oil & Gas Automotive. Aviation. Medical. Machining Titanium
Ti MACHINING Energy Oil & Gas Automotive Aviation Medical Machining Titanium TiAl6V4, Grade 5 alloy is the commonly used titanium grade. Some applications include: compressor blades, discs, and rings for
More informationM.A.FORD Where high performance is the standard.
For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid carbide tooling,
More informationPROMAX. Tools. Feel The Edge. Winning The World Over One Amazing Tool At A Time. Specializing In High Performance Solid Carbide Cutting Tools
PROMAX Tools Feel The Edge Specializing In High Performance Solid Carbide Cutting Tools VAR-A-TECH Winning The World Over One Amazing Tool At A Time SERIES 101 ROUGHER PRO-4 Vol. 1108A SPECIALS High Performance
More informationVictory M1200 Series...B2 B27. M1200 Mini...B2 B21 M1200 HD...B22 B27. M690 Series...B28 B32. M270 Series...B34 B40. M370 Series...
Indexable Milling Victory M1200 eries.................................................................................b2 B27 M1200 Mini..................................................................................B2
More informationWFXC Type. Expansion H62. General Features. Characteristics. Series. Milling. Cutters. SEC-Wave Mill
EC-Wave ill WFX Type Expansion General Features EC-Waveill WFX type for shoulder milling, is a screw-on type cutter that uses 4-cornered inserts. Ideal cutting edge design delivers good squareness. eries
More informationT5100 SERIES. For a wide range of cast iron turning applications. Keeping the Customer First. CVD Coated Grade for Grey and Ductile Cast Iron Turning
Keeping the Cusmer First Tungaloy Report No. 359-E CVD Coated Grade for Grey and Ductile Cast Iron Turning T50 SERIES For a wide range of cast iron turning applications T50 SERIES Drastically improved
More informationCERATIZIT designation system
C5 CEATIZIT designation system Tool holders UTS / HSK-T system Assembly size (system) MSS system E = external / I = internal Assembly size Hand Approach angle Parting and grooving depth Shank section,
More informationSpecial Product Catalogue. T-A Drill Insert System
Special Product Catalogue T-A Drill Insert System T-A Special Products - Application Example Automotive Cylinder Head Application - Cylinder Head Water Jacket Holes Application - Cylinder Head Water Jacket
More informationProduct Catalog. GREENTOOL Co.,Ltd. Carbide End Mill GT Series. Flute shape corresponding to work Materials!! Coating excellent in durability!!
GREENTOOL Co.,Ltd. Product Catalog Carbide End Mill GT Series Point 1 Point 2 Point 3 Flute shape corresponding to work Materials!! Coating excellent in durability!! Possible change order of specification!!
More informationO-D TOOL & CUTTER INC. End Mill Catalog
O-D TOOL & CUTTER INC. End Mill Catalog O-D TOOL & CUTTER INC. 150 GILBERT STREET, MANSFIELD, MA 02048 Tel: (508) 339-7507 Fax: (508) 339-5667 Website: www.odtool.com CARBIDE 4 FLUTE WAVE MILLS WITH ALTIN
More informationCarbide Drills When productivity matters - Stub 1. to Long 1
CARBIDE DRILLS Carbide Drills When productivity matters - Stub 1 to Long 1 hole depths - With & without internal coolant - Ultra fine grain type carbide - Technically advanced multi-layer coatings Drill
More informationMFH-RAPT R High Feed Milling Cutter
MFH-RAPT R High Feed Milling Cutter -MiNi Expanded Lineup New MFH-Mini end mills now available in diameters from 0.625 to 1.250 Higher Productivity Double-sided 4-edge inserts will save money and increase
More informationEFFICIENT OPTIMIZED ROUGHING NIAGARA CUTTER MULTI FLUTE SOLID CARBIDE END MILLS
FFICINT OPTIMIZD ROUGHING NIAGARA CUTTR MULTI FLUT SOLID CARBID ND MILLS UNSURPASSD CHIP CONTROL A NW LVL OF PRFORMANC The Niagara Cutter Multi Flute family of products is taking Optimized Roughing to
More informationHigh-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
More informationHigh-performance milling cutter NVDS For up to 15 times faster penetration
passion for precision High-performance milling cutter NVDS For up to 15 times faster penetration New cutting data calculator ToolExpert The 7 dimensions of NVDS technology opens a ground-breaking range
More information220º Ball Nosed Lollipop Cutter
220º Ball Nosed Lollipop Series 722 Ultra-High Performance Solid Carbide -TiALN 30º Right Hand Helix - Micro-grain K30 4-Flute 220º Ball Nosed Tolerances: +0.00/-0.051mm h6 FL Neck Reach Dia- Dia- Dia
More informationRM3. Multi Functional Shoulder Milling Tool for Higher Productivity. High Quality. Excellent Productivity. Great Value for Money
Multi Functional Shoulder Milling Tool for Higher Productivity High Quality True perpendicular shouldering operation Excellent Productivity Strong thick insert and 3-face clamping for stable milling even
More informationMHS TOOLS NEWS B137G. Drills for die & mould machining
TOOLS NEWS Solid Carbide for Die & Mould Machining WSTAR Series 2013.3 Update B137G Small diameters now included s for die & mould machining Innovative drilling in hardened steel by eliminating the need
More informationExcellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering
Rich Mill Series Multifunctional Shouldering Milling Tool Excellent SHOULDERING with 3-corner insert Multi milling tool for best results in perpendicular shouldering High rake chipbreaker for high speed
More informationADF. Vol.6. Carbide Flat Drill ADF-2D ADFLS-2D ADFO-3D 超硬フラットドリル ステンレス鋼対応可能油穴付き160 サイズ追加
超硬フラットドリル ADF Carbide Flat Drill ADF-2D ADFS-2D ADFO-3D Vol.6 新価格体系 New Price 2018 年 6 月 ステンレス鋼対応可能油穴付き160 サイズ追加 Expanded with oil hole type in 160 sizes. Stainless steel compatible. 2Dタイプに小径 φ0.2 1.95mm
More informationExpansion. Achieves high-efficiency milling with v f of over 20,000mm/min thanks to its multi-edge design (3 edges per inch).
igh Efficiency Cutter for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes
More informationMHS B137E. Drills for die & mould machining. New smaller diameters ø0.95 ~ ø2.95 up to 30 x D added to the range. Complete series up to ø12.
Small diameters now included Solid Carbide for Die & Mould Machining 214.1 B137E s for die & mould machining Innovative drilling in hardened steel by eliminating the need for heat treatment after machining.
More informationTools for Aluminum. New Expanded Offering. ISO 9001 Certified
Tools for Aluminum New Expanded Offering www.kyocera-sgstool.com ISO 9001 Certified S-CAB HIGH PEFOMANCE END MILLS The original, symmetrical flute design features an engineered flute form that provides
More informationEnd Mills. Drills. NEW Sizes Series 136 & 138. NEW Metric Sizes Series 135BN, 138B & 138BN
End Mills Drills NEW Sizes Series 136 & 138 NEW Metric Sizes Series 135BN, 138B & 138BN Celebrating 90 Years 1919-2009 Table of Contents Series Page # of Flutes Square End Ball Nose Corner Radius Neck
More informationKGD for Automatic Lathe
Cut-off Tool Cut-off Tool KGD KGD for Automatic athe Stable achining and ong Tool ife ower Production Costs Edge idths Available from 1.3 mm Excellent Chip Control ong Tool ife with EGACOAT NANO P1535
More informationNVS The new standard in universal machining
passion for precision NVS The new standard in universal machining [ 1 ] NB-NVS cylindrical mills The new standard in universal machining [ 2 ] With its NB-NVS mills, FRAISA is launching a new standard
More informationBreaker. Sensation of high speed aluminum machining. Feature
VF Sensation of high speed aluminum machining Breaker Feature - Multi-dimension clamping system : strong clamping force in high speed operation. - Buffed top face : Decreasing built-up edge & excellent
More informationSolid carbide Twist Drills Overview
Solid carbide Twist Drills Overview Manufacturer ß 000000000000 DIN similar to 899 338 338 338 6539 6539 6539 6539 6539 6539 6539 6539 6539 Counters.cut.Counters.cut. 3 x D 3 x D 3 x D, IKZ 3 x D, IKZ
More informationPDL025. DLC Coating. High Quality and Long Tool Life for Machining Aluminum
High Quality and Long Tool Life for Machining Aluminum Achieves Long Tool Life with Hardness Close to that of Diamond Excellent with Aluminum Welding Resistance Large Lineup for Turning, Milling, and Cut-Off
More informationTechnical Section. Thrust & Horsepower. Tool Assembly T-A & GEN2 T-A GEN3SYS
Tool Assembly 1. Place the Drill Insert in the precision ground locating pocket on the Holder. 2. The drill insert should not be turned, rotated or twisted for locking purposes. The holder pocket and locating
More informationWood- and board material. Plastic. Composite. Aluminium. CNC milling tools.
Wood- and board material Plastic Composite Aluminium CNC milling tools INTRODUCTION JHV Tools produce solid shank cutters for working of all materials. JHV Tools has particularly specialized in producing
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationNo. of Holes. Drill Dia. (in.)
UTTING TOOLS Heavy Duty Dyno Jobber Drill Set 1/16" - 1/2" by 64ths 29 Pc. in metal index Premium high speed steel 135 Self centering split point Use in high temperature alloys, heat treated alloys, cast
More informationUPDATE. Ultra-Shear High Performance Button Cutter. Insert Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN)
Style: RJLT (MOTN, MON, MONLL) RJLW (MOTN) RJET (MOFN) Face Mills: 1A7G (10mm IC insert) 1A7H (12mm &.500" IC insert) 1A7K (16mm IC insert) 1A7M (20mm &.750" IC insert) End Mills: 15B1A (10mm IC insert)
More informationTR4D. High Feed Radius Mill. New Product News No. H1901A
TR4D High Feed Radius Mill New Product News No. H1901A-1 2019-1 Technology Applications Roughing Copper Carbon steel Alloy steel Stainless steel Pre-hardened steel Hardened steel Hardened steel Tool steel
More informationTDXL Serie PRODUCT INFORMATION. Vol 2. HSS EXTRA LONG DRILLS 10 D, 15 D and 20 D! NEW TDXL
PRODUCT INFORMATION Serie HSS EXTRA LONG DRILLS D, D and 2 D! Vol 2 Newly developed flat flute (Pat. P.) Newly developed low-resistance thinning (Pat. P.) Newly developed WXL coating for drills features
More informationUniversal milling tools Favora. passion for precision
Universal milling tools Favora passion for precision ToolService in Willich, Germany FRAISA thanks to tool reconditioning and material recycling www.bluecompetence.net End milling tools for
More informationMining & Construction Tools. Technical Information for Brazed Tools. General Cutting Tools. Rotating Brazing Tools
BRAZED TOOLS Technical Information for 02 KORLOY Ultra-Fine Grades : F-Series 02 Corrosion & Magnetism Proof Grade : IN-Series General Cutting Tools 03 Cemented Carbide, Cermet Blank 04 Square Blank 06
More informationSuper Radius Mill. TD4N type. Super Radius Mill TD4N type. New Product News No.1604E
Super Radius Mill type Super Radius Mill type New Product News No.1604E-4 2017-10 Te c h n o l o g y JM4160 Stainless steel Pat. No.5967330 JS4045 GX2140 Carbon steel Alloy steel Features JP4120 Pre-hardened
More informationDouble Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling.
No. 439 EPSM-W-PN Epoch Multi Double Gash achieves perfect balance with rigidity and chip evacuation. It guarantees high performance in vertical and horizontal milling. Conventional single gash type EPSM
More informationExpansion. Achieves high-efficiency milling with V f of over 20,000mm/min thanks to more teeth (3 edges per inch).
igh Efficiency for F Type Expansion General Features The F type high efficiency cutter for aluminum alloy achieves machining without burrs using a unique insert shape. ew FF types with oil holes and BBT30
More informationFeatures. May 1, No. 204-M-02
May 1, 2009 No. 204-M-02 Features - High rake angle cutting edge realized high feed and multi functional machining due to reduced cutting load. - HRMD has improved economical aspect to use 6 cutting edges
More information"IMCO" SOLID CARBIDE CUTTING TOOLS - USA
"IMCO" SOLID CARBIDE CUTTING TOOLS - USA 30 RH Helix Slotting Side Milling Side Milling Pocket (Square) (Side Face) (Shoulder) Cavity NO. S 97-1 "IMCO" SOLID CARBIDE END MILLS 4 FLUTE SQUARE END, METRIC
More informationSR-SAF Ball nose roughing endmill
/ BALL NOSE ENDMILLS SR-SAF Ball noe roughing endmill Cutter program, SR 10-20 m m m m m m (CM) ød 5m th l 3 l 3 Long cylindrical hank Weldon hank More taper Threaded modular head Reference D c D 3 Max.
More informationALPHA MILL P H M S K N 90 SQUARE SHOULDER MILLING WITH LOW CUTTING RESISTANCE & SMOOTH CHIP FLOW GENERAL
90 QUARE OULDER ILLIG WIT LOW CUTTIG REITACE & OOT CI FLOW teel ardened teel tainless teel RA s Cast Iron on Ferrous FEATURE - Inserts feature Alpha Curve geometry for the smoothest cutting action - Low
More informationSP - SURFACE GRINDING AND MILLING MACHINES. AZ spa MACHINE TOOLS. SP1300 SP1600 SP2000 version M-Y-PLC
SP - AZ spa MACHINE TOOLS SP1300 version M-Y-PLC 0.2 Variable speed - on the table movement - on the head movement - on the grinding wheel rotation Automatic and programmable working cycle SP1300 PLC PLC
More informationHigh Efficiency Drilling in Various Types of Machining
TOOL NEWS 218.7 Update B233B Solid Carbide Flat Bottom Drills Series Series Expansion High Efficiency Drilling in Various Types of Machining A Solid Carbide Flat Bottom Drills Series High Efficiency Drilling
More informationMachining Intelligently
ISCAR s Solutions for Manufacturing Turbochargers Machining Intelligently ISCAR HIGH Q LINES www.iscar.com Turbocharger Industries Turbine Housing Compressor Housing Turbine Wheel Bearing Housing In today
More informationEPDRF. High-Precision Four Flute Corner Radius End Mills for Deep Machining FEATURES. Flute shape provides both rigidity and excellent chip removal.
High-Pecisio Fou Flute Coe Radius Ed Mills fo Deep Machiig FEATURES Flute shape povides both igidity ad excellet chip emoval. Upecedeted coe adius accuacy of ±0.005mm. Bottom flute wipe effect educes chatteig
More informationAQUA DRILL EX OIL-HOLE LONG
AQUA DRILL EX OIL-HOLE LONG HIGH-EFFICIENT DEEP HOLE DRILL CELEBRATE THE POLE POSITION NEW AQUA EX COATING Deep-Hole Drills Aquadrill EX Oil-hole long Reliable and Durable in Largest Drill Depths High-Efficient
More informationSolid End Milling High-Performance Solid Carbide End Mills
Solid End Milling High-Performance Tool Selector and Grades...P2 P11 High-Performance Capability End Mills...P12 P86 High-Performance Solid Carbide Roughing End Mills...P88 P104 High-Performance Solid
More informationSURFACE GRINDERS. A Line of Precision Low-cost, High Performance Surface Grinders
SURFACE GRINDERS PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 SURFACE GRINDERS A Line of Precision Low-cost, High Performance Surface Grinders Precision Manual Surface Grinders Precision Hydraulic
More informationMite Mfg Co.098 Diesel X SIZE R0.217" " deep R0.111" Drill #21. Tap Drill #50. 1/4" deep on " PCD Tap 2-56 (3 places) R0.
0.100" 0.074" 0.766" Ø0.398" Ø0.188" 25 Ø0.312" Ø0.125" 0.552" Ø0.250" (ream) 0.306" 0.166" 0.535" Ø0.775" Ø0.716" Screw cut 32 TPI 0.019 " deep -1 CRANKCASE Magnesium Die Casting with cast-in bronze bush
More informationDFC Milling Cutter. Superior Toughness & Excellent Tool Life High Performance Double-sided 6 Edge Inserts
CAT.DFCBROCHURE.12/15 Sumitomo High Efficiency, Doule-sided 90 Milling Cutter DFC Milling Cutter Superior Toughness & Excellent Tool Life High Performance Doule-sided 6 Edge Inserts DFC Mill Features &
More informationSide Cutter Series. Side Cutter with Low Cutting Resistance TOOL NEWS. Vertical mount double-sided insert for VAS and VOS. Milling B242A.
TOOL NEWS 2017. Update B242A Milling Side Cutter Series New Product Side Cutter with Low Cutting Resistance Vertical mount double-sided insert for VAS and VOS. VAS0 VAS500 VOS0 ASX0 1 Unique side cutter
More informationReduced Chip Biting Issues when Grooving Small Parts
Grooving Tools for Small Parts Machining Grooving Tools for Small Parts Machining educed Chip Biting Issues when Grooving Small Parts Stable Chip Control, GL Chipbreaker Added to Lineup Wide Application
More informationExpanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads
Page 1 / 5 MM GRIT 28K-45A MM GRIT 28K-75-6T10 MM GRIT 28K-60-6T10 MM GRIT 28K-45-6T10 Expanded Options for the MM GRIT 28.. Grooving and Chamfering Milling Heads Page 2 / 5 Highlights Following market
More informationHIGH SPEED ALUMINIUM MACHINING WITH ULTRA HIGH METAL REMOVAL & EXCELLENT SURFACE FINISH
IG EED ALUIIU ACIIG WIT ULTRA IG ETAL REOVAL & EXCELLET URFACE FII teel ardened teel tainless teel RA s Cast Iron on Ferrous TE O. 1 ILLIG YTE FOR ALUIIU, COER, LATIC & BRA, OFFERIG IRROR FII ULTRA IG
More informationList No STANDARD All sizes 1 each
Carbide Tipped Carbide Tipped offers excellent wear resistance for general reaming of steel, cast iron, plastics, and other abrasive non-ferrous materials. Longer tool life in production applications.
More informationTOOLS NEWS B250G. Multi-functional Cutter for High Efficiency Machining VPX. New Product. Series. Boost Your Milling with a Tough Tangential Insert!
TOOLS NEWS B250G Multi-functional Cutter for High Efficiency Machining VPX Series New Product Boost Your Milling with a Tough Tangential Insert! TOUGH & MULTI VPX Series Extremely rigid and functional.
More informationGEAR GENERATION GEAR FORMING. Vipin K. Sharma
GEAR GENERATION GEAR FORMING 1 GEAR MANUFACTURING Manufacturing of gears needs several processing operations in sequential stages depending upon the material and type of the gears and quality desired.
More informationHigh feed-rate machining, combined with a low axial engagement, reduces production times while utilizing existing machinery.
V555 & V556 High Feed Milling System Save time and reduce production costs with high productivity milling cutters. High feed-rate machining, combined with a low axial engagement, reduces production times
More informationM.A.FORD Where high performance is the standard.
Products For more than 90 years, M.A.FORD has been at the cutting edge of tooling design and manufacture and has developed an enviable global reputation for performance and precision in advanced solid
More informationPRODUCT CATALOG MAIN INDEX
PRODUCT CATALOG MAIN INDE Contents Pages Table of Contents-cum-Selection Guide 8-15 Icon Glossary 16 Carbide Drills 17-44 Carbide Reamers 45-53 Carbide End Mills 54-123 HSS Tool Bits, End Mills & Centre
More informationMILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models
Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523
More informationInfo Overview - solid carbide twist drills (I) Drilling Tools
Info Overview - solid carbide twist drills (I) Brand 0 0 0 0 0 0 0 0 Company standard Company standard Company standard Company standard 6539 6539 6539 6539 5 x D Countersink Countersink Article number
More informationHigh Speed Jet Spindle
1/28 High Speed Jet Spindle 2/28 High speed jet spindle TaeguTec has launched a revolutionary new high-speed spindle developed for applications using high RPM for small diameter tools that can be used
More information-treme thread cutting. New. Swiss-Line. Inch
New TM -treme thread cutting Swiss-ine Inch 2015-2016 Swiss-ine Swiss-ine Swiss style lathes are becoming a popular alternative to large lathes and machining centers in many companies. Carmex is introducing
More informationINDEXABLE DRILLS. Pages Phone: (800) WDX Drills. WDX Features & Benefits
INDEXABLE DRILLS ages 471-493 ages Features & Benefits.......................... 47 Insert Selction Guide....47 XD - 5XD (INCH) & 4XD Side ort....... 473-475 XD - 5XD (METRIC)... 476-477 Cutting Conditions...
More informationB250E VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER
VPX SERIES BOOST MILLING PERFORMANCE WITH A TOUGH TANGENTIAL INSERT CUTTER 2018.04 B250E TOUGH & MULTI-FUNCTIONAL 2 VPX SERIES Extreme rigidity and functionality. Thoroughly designed to completely change
More informationThreading tools to JIS standard
Taps for metric, metric-fine, UNC, UNF and PT threads For universal applications, stainless steel, cast iron and aluminium as well as for hard machining -PM high-performance taps with new TiAlN-coating
More informationCNC gantry-type machining center. PSD-Mill CNC
gantry-type machining center PS-Mill T e c h n i c a l a t a s h e e t xtremely robust and solid base frame provides great rigidity, stability and vibration-free work even with heavy duty cutting Rigid
More informationVariable End Mills. *Lessens chatter *Increases tool life *Allows for more aggressive machining ALTIN. List Price. Part Number
*Lessens chatter *Increases tool life *Allows for more aggressive machining 4 Flute Stub & Regular Length With Radius & Ball Nose Dia Flute Length Overall Length Radius Part Number List Price Ball Nose
More informationThe MATHEY Pneumatic or Hydraulic Powered CGM-1
CGM-1 COLD CUTTING & BEVELING MACHINE in Pneumatic and Hydraulic versions Approved CGM-1 A Pneumatic Driven Part No.: 05.5500.559 CGM-1 O Hydraulic Driven Part No.: 05.5500.560 The CGM Cold Cutting and
More informationSpecial drills 88 PRECISION TOOLS
SPEIAL DRILLS 02 Special drills Spot weld miller For removing spot welds from sheet metal. Exchangeable and doubleheaded milling crown. Adjustable milling depth with setting screw. No tearing of the sheet
More informationSC series(twist drill) for machining of cast iron, Al alloy
C Tools (twist drill) for machining of cast iron, Al For materials with short chips such as cast iron, silicon-aluminum, etc. Cutting edge and shank with same. tools (twist drill) 2.0 2. 2.8.0 type 110SC0-0200
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationSilver fox -New indexable drills for shallow holes
Silver fox -New indexable drills for shallow holes 1 Internal coolant hose connecter, which is used in lathe. 2 New tool body material with greatly improved tool rigidity. 3 Tool body with specially treated
More informationVERTICAL KNEE MILLS. MACHINERY & TOOLS CO South Ave. *Toledo, OH / *fax 419/
VERTICAL KNEE MILLS MACHINERY & TOOLS CO. 4545 South Ave. *Toledo, OH 43615 419/537-1717 *fax 419/537-1719 Email:sales@willismachinery.com www.willismachinery.com WM3VS AND 1050 MILLING MACHINES 3HP spindle
More informationINDUSTRIAL ROUTING CUTTING TOOLS
CUTTING TOOLS Technical Information UpCut, DownCut, Compression. What are the pros and cons of each of these chip flow styles? Below highlights some of the key considerations that should be taken into
More informationCGM COLD CUTTING & BEVELING MACHINE
CGM Cold Cutting & Beveling Machines cut large diameter pipe when flame is not an option. Available in Hydraulic and Pneumatic models and perfect for use on pipelines and in plants. The Hydraulic model
More information