General Apparatus. Petroleum Products Timers Clamps Frames Laboratory Jacks Set-up Frame Set.

Size: px

Start display at page:

Download "General Apparatus. Petroleum Products Timers Clamps Frames Laboratory Jacks Set-up Frame Set."

Georgiana Lora Gaines
5 years ago
Views:

Set-up Frame Set Lab-Chron Timer Lab-Line presents a wide variety of high quality general laboratory apparatus to compliment our line of constant temperature products.

1 Set-up Frame Set Lab-Chron Timer Lab-Line presents a wide variety of high quality general laboratory apparatus to compliment our line of constant temperature products. Choose corrosion-resistant alloy clamps, support frames, and precision lab jacks to support your glassware and apparatus. Check out our accurate timers, the safety tongs and Saf-T-Shield, plus the Saybolt viscosimeters and products for petroleum testing. And Thermo-Flasks General Apparatus Clamps Frames Laboratory Jacks Petroleum Products Timers

Alumaloy Clamps Special die-cast aluminum alloy more corrosionresistant than zinc or steel 47,000 psi tensile strength and 1100 F melting point Stainless steel spring for uniform tension

Model 7014 Tri-Grip 45 Combination Utility and Burette Three-pronged jaws Three vinyl and three woven fiberglass high temperature sleeves included 360 -rotating 45 angle ribbed thumbscrew clamp

9) 7022 Micro 1 /4 (.6) 1 (2.54) 3 3 /4 x 5 1 /2 7 (17.8) (9.5 x14) 2 x 5 1 /2 1 /4 (.

2 Alumaloy Clamps Special die-cast aluminum alloy more corrosionresistant than zinc or steel 47,000 psi tensile strength and 1100 F melting point Stainless steel spring for uniform tension Nickel-plated brass pivot pins ensure positive movement without wobbling Economical and reliable, Alumaloy clamps have been field-tested by thousands of satisfied users. Model 7014 Tri-Grip 45 Combination Utility and Burette Three-pronged jaws Three vinyl and three woven fiberglass high temperature sleeves included 360 -rotating 45 angle ribbed thumbscrew clamp holder Support Rod Total Ext. Rod Dia. Jaw Cap. Adjustable Length Model Description Inches(cm) Inches(cm) Inches(cm) Inch.(cm) 7010 Small 3 /8 (.9) 1 1 /2 (3.8) 7014 Large 7 /16 (1.1) 3 1 /2 (8.9) 7022 Micro 1 /4 (.6) 1 (2.54) 3 3 /4 x 5 1 /2 7 (17.8) (9.5 x14) 2 x 5 1 /2 1 /4 (.6) (5 x 14) Model 7004 Tri-Grip 45 Extension Clamps Three-pronged jaws Three vinyl and three woven fiberglass high temperature sleeves included Sizes to fit every application Ext. Rod Dia. Jaw Capacity Total Length Model Description Inches (cm) Inches (cm) Inches (cm) 7000 Small 3 /8 (.9) 1 1 /2 (3.8) 9 (22.9) 7004 Large 7 /16 (1.1) 3 1 /2 (8.9) 11 (27.9) 7018 Micro 1 /4 (.6) 1 (2.54) 6 1 /2 (16.5) Varigrip Clamps Model ,2,3,4 Perfect for cylindrical glassware and similar apparatus Adjustable spring collar Stainless steel handle and clamp Available in four sizes Thumbscrews included O.D.Accommodation Extension Shaft Dia. Total Length Model Inches (cm) L" x D" (cm) Inches (cm) ( ) ( ) x (18.4 x 1.1) (30.5) (12 14) ( )

Model 7053 Model 7066 Model 7040 Extension Clamp Couplings Used to join support rod lengths or to extend clamps fastened to

coupling Model 7066 provides side-to-side linear coupling, with v-shaped centering groove to guarantee Rod Capacity Dia.

8) Clamp Holders Model 7040 Double 45 Clamp Holder for rods or pipes up to 7 8" diameter Horizontal or vertical right-angle clamp

Clamp sections are at right angles to each other Rod Capacity Dia. Total Length Model Inches (cm) Inches (cm) 7040 up to 7 8 (2.

1) Model 7050-1 Model 7050-6 Model 7072 Frame Clamps Used for apparatus support frame set-up: add a horizontal or vertical rod

thumbscrews perfect for student use Rod Capacity Dia. Total Length Model Inches (cm) Inches (cm) 7050-1 7050-6 1 2 (1.3) 1 3 4 (4.

3 Model 7053 Model 7066 Model 7040 Extension Clamp Couplings Used to join support rod lengths or to extend clamps fastened to support rods Allows rods of different diameter to be intermixed Ribbed thumbscrews included Model 7053 provides end-to-end butt coupling Model 7066 provides side-to-side linear coupling, with v-shaped centering groove to guarantee Rod Capacity Dia. Total Length Model Inches (cm) Inches (cm) (1.3) 3 (7.6) /2 (3.8) Clamp Holders Model 7040 Double 45 Clamp Holder for rods or pipes up to 7 8" diameter Horizontal or vertical right-angle clamp set up Two 45 angle ribbed thumbscrews included Model 7068 One-hand Clamp Holder both thumbscrews are mounted on the same side Clamp sections are at right angles to each other Rod Capacity Dia. Total Length Model Inches (cm) Inches (cm) 7040 up to 7 8 (2.2) (14) (1.3) 2 (5.1) Model Model Model 7072 Frame Clamps Used for apparatus support frame set-up: add a horizontal or vertical rod without having to tear down the existing standard frame Model uses Allen screws (included) Model has ribbed thumbscrews perfect for student use Rod Capacity Dia. Total Length Model Inches (cm) Inches (cm) (1.3) (4.4) Pinchcock Clamps Used to control liquid flow through flexible tubing up to 1 4" diameter Stainless steel spring maintains tension Sturdy Lexan plastic construction Model 7072 for flexible tubing Tubing Capacity Dia. Total Height Model Description Inches (cm) Inches (cm) 7072 Regular 1 4 (.6) 2 (5.1) 7073 Heavy Duty

Model 7054 Model 7077 Duo-Clamp Add attachments to support framework without disturbing previous set-up

bead wrench included 1 1 8" overall diameter Thermometer Clamp Support thermometers, glass tubes, or

rotate 360 Model 7080 Suspension Clamp Suspend thermometers, drying tubes, or similar apparatus in water

All-Angle Swivel Clamp Connect rods, extension clamps, frames, or other apparatus up to 1 2" diameter at

4 Model 7054 Model 7077 Duo-Clamp Add attachments to support framework without disturbing previous set-up Joins two rods in a T connection at any angle within a 360 arc Alumaloy construction Allen set screws and bead wrench included 1 1 8" overall diameter Thermometer Clamp Support thermometers, glass tubes, or similar apparatus of up to 1 2" diameter Stainless steel clamping jaws have 1 2" adjustable extension and rotate 360 Model 7080 Suspension Clamp Suspend thermometers, drying tubes, or similar apparatus in water baths, over dry baths, or over heating surfaces Ribbed thumbscrew clamp holds objects of 1 2" Model 7064 All-Angle Swivel Clamp Connect rods, extension clamps, frames, or other apparatus up to 1 2" diameter at any angle Two 45 angle ribbed thumbscrews rotate on a connecting rod Giant Hosecock Clamp Model 7076 Controls fluid flow through thick- or thin-walled flexible tubing up to 1" o.d. Nickel-plated brass threaded screw with plastic knob Countersunk screw mounting holes in base Grip-Safe Tubing Manipulator Manipulates or breaks glass tubing safely, without risk of injury to hands Molded Neoprene construction Accommodates most commonly-used sizes of tubing, including T and L shapes Total length is 5", with 3" wide flange Model 1480

Model 7057 Model 7078 Water Bath Clamps Double Support Base and Rod Support thermometers and other similar apparatus over water baths Alumaloy

capacity, jaws do not rotate 2 1 2" from apparatus center to center of support Jaw Capacity Rod Capacity Total Length Model Inches (cm) Inches (cm)

8 cm) Base features a drip trough around the rim to prevent lab bench spills Solid aluminum rod is threaded at one end, measures 23"H 1 2" diameter (58.

locks over a hook on the adjustable portion of the collar Accommodates beakers with outside diameter of 2 1 Model 7049 2" to 6 1 2" Stainless steel

2 cm) ERM Double Burette Holder Quickly and securely supports two burettes from micro size to 100 ml Built-in meniscus reader Holder will not obscure

5 Model 7057 Model 7078 Water Bath Clamps Double Support Base and Rod Support thermometers and other similar apparatus over water baths Alumaloy construction with three-prong, vinylcovered jaws Model 7078 Large clamp with rotating jaws, 1" jaw capacity Model 7079 Small clamp with 1 2" jaw capacity, jaws do not rotate 2 1 2" from apparatus center to center of support Jaw Capacity Rod Capacity Total Length Model Inches (cm) Inches (cm) Inches (cm) (2.54) (1.3) (8.9) 2 (1.3) White glazed porcelain base measures 13" 17" ( cm) Base features a drip trough around the rim to prevent lab bench spills Solid aluminum rod is threaded at one end, measures 23"H 1 2" diameter ( ) Model 7058 includes the Double Burette Holder (Model 7086) with the Double Support Base and Rod (Model 7057) Chain Clamp Model " chain locks over a hook on the adjustable portion of the collar Accommodates beakers with outside diameter of 2 1 Model " to 6 1 2" Stainless steel shaft is 7 1 4"L 7 16" diameter ( cm) Total length " (29.2 cm) ERM Double Burette Holder Quickly and securely supports two burettes from micro size to 100 ml Built-in meniscus reader Holder will not obscure graduation lines and numbers Sturdy, corrosion-resistant Lexglas construction Overall dimensions 9 1 2"W 5"H ( cm), weighs only 6 oz Frame Foot Designed to support frame set-ups Accepts 1 2" diameter rods 3 countersunk screw holes in foot Allen set screws included Overall diameter 2" Model 7051

Set-Up Frame Sets Easy construction in almost any rectangular shape and size 4 sizes of frame setups 11 sizes of frame rods Model 7092 These rigid frame supports are especially useful for glassware

6 Set-Up Frame Sets Easy construction in almost any rectangular shape and size 4 sizes of frame setups 11 sizes of frame rods Model 7092 These rigid frame supports are especially useful for glassware and apparatus assemblies in chemistry labs. They allow the addition or removal of supports and apparatus without needing to dismantle the entire set-up. Frame sets come with all components necessary for a complete frame assembly Extruded solid aluminum 1 2" diameter rods Wide assortment of rod lengths available, suitable for many laboratory applications Create three-dimensional set-ups with the 3-D Squaroid Frame CONTENTS OF ALUMALOY SET-UP FRAME SETS Description No No No No Rod, 1 5 8" (4.1 cm) (No ) Rod, 12" (30.5 cm) (No ) 6 Rod, 18" (45.7 cm) (No ) Rod, 24" (61 cm) (No ) Rod, 36" (91.4 cm) (No ) 2 2 Rod, 48" (122 cm) (No ) Rod, 72" (182.9 cm) (No ) 5 Frame Clamp (No ) Frame Foot (No. 7051) 8 SET-UP FRAME SETS Dimensions Model H" x W" (cm) x 24 (61 x 61) 7092* 24 x 48 (61 x 122) x 48 (122 x 122) 7096* 48 x 72 (122 x 182.9) *can be inverted ALUMALOY RODS Cat. No Length 1 5 8" 12" 18" 24" 36" 48" 72" 96" 2" 6" 144" (cm) (4.1) (30.5) (45.7) (61) (91.4) (122) (182.9) (243.8) (5.1) (15.2) (365.8)

7 Provides smooth, easy raising and lowering of many different types of instruments or apparatus, such as heaters, hot plates, water baths or glassware Available in 4 sizes Sturdy, corrosion-resistant anodized aluminum construction Model 25 Multi-Jacks Ideal for any laboratory setting, Lab-Line Multi-Jacks support various types and sizes of glassware, apparatus, and instrumentation at specific heights as required to accommodate experimental set-ups. Accurate, vertical slippage-free adjustment Stable in all positions Stepless screw-type control raises or lowers loading platform OPTIONAL PLATFORMS Size of Plate Adjustable Max Load at Net Wt. Ship Wt. Dimensions Inches From-To Middle lbs. lbs. Model Inches Model (cm) Inches (cm) lbs. (kg) (kg) (kg) (Set/2) (cm) x 3.1 (7.5 x 8.0) 1.9 to 5.8 (4.9 to 14.7) 66 (30) 0.57 (0.26) 0.87 (0.39) x 7.9 (20.0 x 20.0) x to x 11.8 (12.0 x 14.0) (6.0 to 24.3) (50) (0.70) (0.85) (30.0 x 30.0) x 9.3 (18.0 x 26.0) x 7.9 (20.0 x 20.0) x 5.9 (12.2 x 15.0) 3.1 to 10.8 (8.0 to 27.8) 176 (80) 2.20 (1.00) 2.60 (1.18) x 11.8 (30.0 x 30.0) x 9.8 (18.0 x 26.0) x 7.9 (20.0 x 20.0) 26* 7.9 x to x 11.8 (20.0 x 20.0) (8.0 to 27.8) (80) (1.41) (1.82) (30.0 x 30.0) x 9.8 (18.0 x 26.0) *Includes two (7.9" x 7.9") Platforms ACCESSORIES Dimensions Model Description Inches (cm) 25-2 Screw for Platforms 25-5 Retort Stand Plate 25-6 Support Rod 25-7 Rubber Mat 7.9 x 7.9 (20 x 20) 25.6 L (65.0) 7.9 x 7.9 (20 x 20) MOTORIZED MODEL Size of Plate Adjustable Max. Load at Net Wt. Ship Wt. Motor Inches From-To Inches Middle lbs. lbs. Model Volts* Type (cm) (cm) lbs. (kg) (kg) (kg) *Rated 50/60 Hz Variable 7.1 x x Speed (18.0 x 21.6) (9.5 x 39.8) (90) (4.6) (4.9)

8 Temperature control from 60 F to 220 F or 125 F to 450 F as specified by A.S.T.M. D-88 Three heaters for full temperature 75 watts continuous, 75 watts controlled by main switch, 660 watts for quick heat Durable stainless steel bath is welded securely to stainless steel draft shield and base Saybolt Viscosimeter The Lab-Line Constant Temperature Saybolt Viscosimeter is designed to measure the Saybolt viscosity of petroleum products in conformity with A.S.T.M. specifications. Bath temperature controlled by mercury-type thermoregulator Electronic relay circuit prevents thermoregulator from carrying the heater load Externally mounted induction motor drives stainless steel propeller stirrer for thorough circulation of oil without excessive agitation Copper cooling coil can be used when operating conditions approach ambient to achieve below-ambient conditions Each unit comes with a Saybolt viscosity tube cleaner, bulb pipette to adjust sample level, corks with pull chains, and oil strainer Models 4510 and 4512provided with 3 gallons of Saybolt Oil; Model 4514A requires a high Model 4510 Overall Dimensions Net Wt. Ship Wt. Temperature Tube W" x D" x H" lbs. lbs. Model Volts* Range Capacity (cm) (kg) (kg) F ( C) 4514A F 4 ( C) *Rated 60 Hz 14 x 16 x (35.6 x 40.6 x 45.7) (15.9) (45.4) ACCESSORIES Model Description 4511 Saybolt Oil Low temperature, gallon 4515 Saybolt Oil High temperature, gallon 4520 Saybolt Viscosity Tube; brass with stainless steel universal orifice, meets A.S.T.M. requirements 4521 Saybolt Viscosity Tube; brass with stainless steel furol orifice 4522 Saybolt Viscosity Tube; brass with stainless steel universal and furol orifices 4523 Saybolt Viscosity Tube; brass without orifice 4524 Saybolt Viscosity Tube; stainless steel with stainless steel universal orifice 4525 Saybolt Viscosity Tube; stainless steel with stainless steel furol orifice 4526 Saybolt Viscosity Tube; stainless steel with stainless steel universal and furol orifices 4527 Saybolt Viscosity Tube; stainless steel without orifice 4528 Stainless Steel Universal Orifice 4529 Stainless Steel Furol Orifice 4530 Road Oil Orifice 4531 Orifice Wrench 4532 Tube Wrench 4533 Saybolt Viscosity Tube; brass with stainless steel universal and furol orifice and orifice wrench 4534 Saybolt Viscosity Tube; stainless steel with stainless steel universal and furol orifice and orifice wrench

Single knob control Toolmaker s dial-type indicator Field tested for ease of use and consistent performance Penetrometer The Lab-Line Hi-Accuracy Penetrometer performs A.S.T.M.

9 Single knob control Toolmaker s dial-type indicator Field tested for ease of use and consistent performance Penetrometer The Lab-Line Hi-Accuracy Penetrometer performs A.S.T.M. penetration tests D-217. Its simplified design eliminates multiple knobs, loose bearings and guides, lack of rigidity, and clumsiness of operation. The Model 4101gives superior performance in measuring the consistency of lubricating greases by penetration of a standard cone. 5" diameter dial is graduated in m m Model 4101 divisions, protected by a convex glass lens cover Locking adjustment on dial for instantaneous zero setting Aluminum penetrometer head rides on 4 bronze bearings total penetration 60 mm Nickel-plated brass plunger slides freely on two large bearings ACCESSORIES Plunger is completely separate from dial head assembly for rapid Model Description interchange, easy cleaning, 4102 Brass Cone with stainless steel dip and stem; grams wt. or weighing 4102S Stainless Steel Cone with stainless steel tip and stem;102.5 grams wt. Aluminum base has adjustable 4103 Penetrometer Needle for A.S.T.M. D-5; 2.5 gram wt.; 1 8" shank leveling screws, circular vial to 4104 Same as #4103 except with Bureau of Standard Certificate show if base is level, circular 4104A Penetrometer Needle for A.S.T.M. D-1321 was penetration; 2.5 gram wt. groove for centering cans or containers 4106 Aluminum Plunger replaces standard brass plunger; 15 gram wt. Available 5-second timer for controlled penetration tests 4107 Aluminum Cone; 35 gram wt Magnesium Cone with stainless steel tip and stem for A.S.T.M. D-217 alternative method covering full range of greases;102.5 gram wt. Base Overall Dimensions Net Wt. Ship Wt. Dimensions W" x D" x H" lbs. lbs. Model Volts Hz L" x W " x H " (cm) (cm) (kg) (kg) x x 3 10 x 11 x (24.1 x 16.5 x 7.6) (45.7 x 27.9 x 25.4) (5.9) (11.3)

10 Model 1405 Push-button reset for ease of use Large illuminated start-stop switch facilitates sequential timing Available solid state electronic model with LED display Angled display for ease of viewing Precision motor provides accurate timing Kwik-Set Lab-Chron Timers Lab-Line s Kwik-Set Lab-Chron Timers have a multitude of uses in physics, chemistry, petroleum, and biology laboratories. They are ideal for timing growth processes, rates of chemical reactions, flow of liquids and gases, and histological preparations. They can also be used in viscosity testing, plus a wide range of other industrial applications. Five digit sealed counter with large, easy-to-read numbers High torque synchronous motor for instant starts Timing is accurate independent of voltage fluctuations or electrical line load Electric brake for instantaneous stops without overshoot Visual and audible alarm signals indicate completion of timing cycle Compact, lightweight, and portable Non-skid rubber feet Time Overall Dimensions Net Wt. Ship Wt. Range W" x D" x H" lbs. lbs. Model Volts Hz (increments) (cm) (kg) (kg) to Seconds (0.1 sec) 0.01 to Minutes (.01 min) x 4 x (18.7 x 10.2 x 11.1) (1.4) (2.3)

Easy-to-set mechanical dial timer Three timing options 1 hour, 12 hour, or 72 hour High-contrast dial is easy to read Use to turn equipment on and off at specific times Model 1410 Lab Minders Timers

11 Easy-to-set mechanical dial timer Three timing options 1 hour, 12 hour, or 72 hour High-contrast dial is easy to read Use to turn equipment on and off at specific times Model 1410 Lab Minders Timers The Lab Minders series of timers are perfect for timing air or water baths, incubators, ovens, furnaces, stirrers, mixers, or shakers. They are specially designed for applications requiring equipment to be turned on and off at specific times ideal for early morning starts and shut downs after closing hours. Mechanical timer is independent of primary power supply Two front-mounted 3-prong outlets control timed on and off of external equipment Dual alarm system choose flashing light, buzzer, or both Model hour timing cycle in 1 minute increments Model hour timing cycle in 15 minute increments Model hour timing cycle in 1 hour increments Visual and audible alarm signals indicate completion of timing cycle Grounded electrical receptacles Outlets are rated for 15 amps at 120 volts Time Overall Dimensions Net Wt. Ship Wt. Range W" x D" x H" lbs. lbs. Model Volts Hz (increments) (cm) (kg) (kg) hour (1 minute) 12 hours 7 x 6 x (15 minutes) (17.8 x 15.2 x 10.2) (1.8) (2.7) 72 hours (1 hour)

Polypro Water Samplers Three sizes filling capacity of 60 ml, 1400 ml, or 2000 ml Polypropylene construction allows accurate sampling for trace metals Autoclavable Model 4196 Polypro Water Samplers

Polypropylene inlet and outlet opening plugs connected with adjustable nylon cord All metal parts are plated or stainless steel Built-in weighted base provides stability when unit is submerged

12 Polypro Water Samplers Three sizes filling capacity of 60 ml, 1400 ml, or 2000 ml Polypropylene construction allows accurate sampling for trace metals Autoclavable Model 4196 Polypro Water Samplers The Lab-Line Polypro Water Samplers are designed for water sampling and B.O.D. testing applications. Polypropylene inlet and outlet opening plugs connected with adjustable nylon cord All metal parts are plated or stainless steel Built-in weighted base provides stability when unit is submerged Bayonet fitting and foam ring hold top on securely Reliable gravityactivated spring catch opening system Model 4199 Overall Size Net Wt. Ship Wt. Capacity H" x D" lbs. lbs. Model (ml) (cm) Construction (kg) (kg) , ,000 7 x 1 7 / (17.8 x 4.8) (0.4) (0.7) 14 x 4 1 / (35.6 x 11.9) Polypropylene (3.4) (4.3) 18 x 4 1 / (45.7 x 11.9) (3.7) (5.2) Sewage Sampler Virtually indestructible Cover and body precisely machined to provide air-tight, water-tight closure Ratio of volume between sampler and bottle complies with three-fold displacement requirement The Sewage Sampler is designed for manual sampling for B.O.D., sludge, turbidity, and dissolved oxygen determinations in accordance with A.P.H.A. Method Requirements and a variety of EPA applications. It is described in the Illinois State Water Survey Bulletin 16, and its use is indicated in the Standard Method of Water Analysis. Overall Dimensions Net Wt. Ship Wt. L x Dia." lbs. lbs. Model (cm) (kg) (kg) x (43.2 x 10.2) (4.1) (6.8) Nickel-plated bronze and brass construction is resistant to corrosive agents Cover is connected to the body by a 10" brass chain Sample bottle (up to 300 ml) is automatically positioned by built-in platform and filling tube

Saf-T-Shield Protects lab workers or students from the initial force of an explosion, sheet of flame, flying glass, or chemical spill Shield is 36" high, adjusts from 14" to 32" wide Can fully

top mounting Model 80 Net Wt. Ship Wt. Dimensions lbs. lbs. Model Fully Extended (kg) (kg) 80 36"H x 32"W 30 37 (91.4 x 81.3 cm) (13.6) (16.

13 Saf-T-Shield Protects lab workers or students from the initial force of an explosion, sheet of flame, flying glass, or chemical spill Shield is 36" high, adjusts from 14" to 32" wide Can fully enclose most lab set-ups such as boiling flasks, distillation, or reflux apparatus use anywhere there s a risk of a reaction getting out of hand Weighted base includes screw holes for permanent bench top mounting Model 80 Net Wt. Ship Wt. Dimensions lbs. lbs. Model Fully Extended (kg) (kg) 80 36"H x 32"W (91.4 x 81.3 cm) (13.6) (16.8) Safety Tongs Manipulate all types of laboratory glassware safely and securely Maximum sensitivity spring handle slightest pressure activates arms, to protect delicate glassware Grips are designed to handle heavy as well as delicate glassware safely and securely Aluminum alloy jaws open to max of 5 1 8" Four silicone grips are supplied tolerate temperatures up to 240 C Available interchangeable jaws improve manipulation Model 7007 ACCESSORIES Model Description 7008 Interchangeable jaws, aluminum alloy 7009 Replacement Silicon Rubber Grips 4/pkg. Maximum Width Total Length Net Wt Ship Wt. Inches Inches lbs. lbs. Model (cm) (cm) (kg) (kg) (15.3) (30.0) (35.0) (0.44)

For industrial, clinical, or educational applications 26 models available, with capacities from 200 cc to 10 < Lightweight design is ideal for everyday laboratory use Lab-Line Thermo-Flasks feature

These flasks are available in stainless steel, enameled steel, or plastic exteriors select models feature vented, clamped lids, carrying handles, and rubber Model 2122 Stainless Steel Thermo-Flasks

nitrogen Model 2124 Inside Outside Glass Capacity Diameter Diameter Height Ship Wt. Liner Model < Inches (cm) Inches (cm) Inches (cm) lbs. (kg) Model 2122 1.0 3 1 3 (8.5) 4 5 8 (11.6) 9 (22.9) 6 (2.

14 For industrial, clinical, or educational applications 26 models available, with capacities from 200 cc to 10 < Lightweight design is ideal for everyday laboratory use Lab-Line Thermo-Flasks feature inner vessels of borosilicate glass evacuated to mm Hg to provide maximum coolant retention and excellent extended temperature retention for samples stored in liquid nitrogen or solid CO 2. These flasks are available in stainless steel, enameled steel, or plastic exteriors select models feature vented, clamped lids, carrying handles, and rubber Model 2122 Stainless Steel Thermo-Flasks with Handle and Lid Durable, corrosion-resistant stainless steel exterior construction with carrying handle and vented lid secured by toggle clamps Recommended for the safe transport of liquid nitrogen Model 2124 Inside Outside Glass Capacity Diameter Diameter Height Ship Wt. Liner Model < Inches (cm) Inches (cm) Inches (cm) lbs. (kg) Model (8.5) (11.6) 9 (22.9) 6 (2.7) (10.8) (13.9) (26.7) 8 (3.6) (15.2) (18.4) (34.9) 10 (4.5) (20.3) (23.5) (33.7) 14 (6.4) 2149 Shallow Wide Mouth Flasks Convenient dish-shaped design is ideal for bench top use with crushed ice, dry ice, or alcohol Also great as a hot liquid container Stainless steel jacket and cushioned base (lids not included) will provide years of trouble-free use See page 133 for Freezers Model 2128 Inside Outside Glass Capacity Diameter Diameter Height Ship Wt. Liner Model ml Inches (cm) Inches (cm) Inches (cm) lbs. (kg) Model (7.6) (10.6) 3 (7.6) 4 (1.8) (10.2) (13.2) (8.9) 6 (2.7) (11.4) 6 (15.2) (9.5) 6 (2.7) (13.6) 7 (17.8) (10.7) 8 (3.6) (15.2) (18.4) (00.0) 10 (4.5) 2154

15 Insulated Thermo-Cups Unbreakable, even with excessively rough handling Inner liner and outer shell constructed of corrosion-resistant stainless steel with foamed in-place insulation between Should not be used for storage of liquid oxygen or nitrogen Capacity Inside Dia. Outside Dia. Height Ship Wt. Cover Model < in. (cm) in. (cm) in. (cm) lbs. (kg) Model " (10.2) 7" (17.8) 7 1 4" (18.4) 6 (2.7) 2101A " (12.7) 8" (20.3) 8" (20.3) 8 (3.6) 2102A " (17.1) 10" (25.4) 9 1 2" (24.1) 10 (4.5) 2104A " (20.3) 11" (27.9) 11" (27.9) 14 (6.3) 2108A Plastic Wide Mouth Flasks Low cost combined with high efficiency Rugged, shock-absorbing plastic exterior with carrying handle and push-fit insulated lid Vented lid prevents gas pressure build-up Borosilicate glass inner vessel Inside Outside Glass Capacity Dia. Dia. Height Ship Wt. Liner Model < in. (cm) in. (cm) in. (cm) lbs. (kg) Model " 5 3 4" 8 3 4" 6 (8.5) (14.6) (22.2) (2.7) 2140 Enameled Steel Thermo-Flasks Safe storage of liquefied gases, temperature retention, and versatility at an economical price Enameled steel exteriors, borosilicate glass liners, and cushioned bases Models include insulated lids and folddown carrying handles Ideal for cold traps Model 2113 Model Inside Outside Glass Capacity Dia. Dia. Height Ship Wt. Liner Model < in. (cm) in. (cm) in. (cm) lbs. (kg) Model without lids and carrying handles " (3.8) 2 3 4" (6.9) 8 1 2" (21.6) 4 (1.8) " (5.7) 3 1 4" (8.3) " (34.9) 5 (2.3) " (6.4) 3 3 4" (9.5) " (28.6) 5 (2.3) " (7.6) 4 1 4" (10.8) 11" (27.9) 6 (2.7) " (8.9) 5" (12.7) " (29.2) 7 (3.2) " (10.2) 5 3 8" (13.9) 11" (27.9) 7 (3.2) " (10.2) 5 3 8" (13.9) 13" (33.1) 8 (3.6) " (13.3) 7" (17.8) " (29.2) 9 (4.1) 2165 with lids and carrying handles " (8.9) 4 5 8" (11.4) 9" (22.9) 6 (2.7) " (10.8) 5 5 8" (13.9) " (26.7) 8 (3.6) " (15.2) 7 1 4" (18.4) " (34.9) 10 (4.5) " (20.3) 9 1 8" (23.3) " (43.7) 16 (7.3) 2148

Adjustable Clamp Holder

Adjustable Clamp Holder 202 Round Jaw Coated Buret Clamp Clamp has Plastisol-coated jaws that rotate 360 and may be locked at any angle by checknut. Stamped steel with zinc plating. Length 6⅜" (162mm) jaw opening ⅜" (10mm) to