Safety. Handy-Glide Closure Glovebag. New APPLICATIONS

Size: px

Start display at page:

Download "Safety. Handy-Glide Closure Glovebag. New APPLICATIONS"

Pamela Knight
5 years ago
Views:

Handy-Glide Closure Glovebag New APPLICATIONS Botany Emergency Isola on Field Sampling Forensics Mailrooms Police Departments Sensi ve Chemicals Schools many other possibili es Handy Glide Closure

2 Handy-Glide Closure Glovebag New APPLICATIONS Botany Emergency Isola on Field Sampling Forensics Mailrooms Police Departments Sensi ve Chemicals Schools many other possibili es Handy Glide Closure Convenient - It is used like a rigid glove box but has much greater flexibility. It is made of 2.5 mil thick polyethylene, with integral gloves. Equipment placed in GLOVEBAG through equipment sleeve and then inflated. Disposable - It is economical enough to be used once and discarded, if contaminated, but it's durable and it can be used over and over if desired. Versatile - GLOVEBAG is great for keeping air-sensitive materials from contact with air or moisture. Use it whenever an inert atmosphere is needed in reactions or in handling reagents. Economical - Even if you have a rigid glove box in your lab, consider the GLOVEBAG. It can be purged faster than a glove box, with less gas, and can be easily adapted to fit your special needs. GLOVEBAG can facilitate any work you are doing with air-sensitive materials.

3 Each bag comes with a tubing connector and 1 pair of co on gloves Handy Glide Glovebags Catalog Number Inflated Work Space W x L x H Equip. Sleeve Width 108D X 17 17HG 17" x 17" x 11" 10" 108D X 27 17HG 27" x 17" x 12" 18 3/4" 108D X 27 27HG 27" x 27" x 15" 22 1/2" 108D X 37 27HG 37" x 27" x 18" 33 1/2" 108D X 37 37HG 37" x 37" x 25" 33 1/2" 108D X 34 34HG 34 x 34 x 23 (4 Hand) D S 20 20HG 20" x 20" x 12" 10" 108D S 30 20HG 30" x 20" x 14" 10" 108D SS 20 20HG 20" x 20" x 12" 10" 108D SS 30 20HG 30" x 20" x 14" 10" Polypropylene Spill Trays Used inside GLovebags Catalog Number Dimensions W x L x H Ship. Wt. 108D ST10 14 x 10 x 1 1 lbs. 108D ST20 14 x 20 x 1 1 lbs. 108D ST24 24 x 24 x 1 1 lbs.

4 Other popular Glovebags Catalog Number Quantity Inflated Work Space W x L x H Equip. Sleeve Width 108D X-17-17H Box of 6 17 x 17 x /2 108D X-17-17H-Eval 1 17 x 17 x /2 108D X-27-17H Box of 6 27 x 17 x D X-27-17H-Eval 1 27 x 17 x D X-27-27H Box of 6 27 x 27 x /2 108D X-27-27H-Eval 1 27 x 27 x /2 108D X-37-27H Box of 6 37 x 27 x /2 108D X-37-27H-Eval 1 37 x 27 x /2 108D X-37-37H Box of 6 37 x 37 x /2 108D X-37-37H-Eval 1 37 x 37 x /2 108D XX-1H Box of 6 Includes: 3/X-17-17H,2/X-27-27H,&1/X H D CG-1 Box of 12 cotton gloves N/A 108D AC-13 One clamp Quick closing clamp 108D AC-24 One clamp Quick closing clamp N/A Use with S,SS and X Use with X & X "X" Model has an equipment opening in front, between the two integral gloves and is supplied in five different sizes. This model is ready to use, the gloves have been turned in. Models S and SS... have a distinct advantage over the X Model for many applications. The equipment entrance sleeve(s) are 12" wide and are located at the side away from user. Gloves are turned in. Model S... has one equipment sleeve at one side. Model SS... has two equipment sleeves, one on each side. Catalog Number Quantity Inflated Work Space Equip. Sleeve W x L x H Width 108D S-20-20H-3 Box of 3 20 x 20 x D S-20-20H-6 Box of 6 20 x 20 x D S-20-20H-Eval 1 20 x 20 x D S-30-20H-3 Box of 3 30 x 20 x D S-30-20H-6 Box of 6 30 x 20 x D S-30-20H-Eval 1 30 x 20 x D SS-20-20H-3 Box of 3 20 x 20 x D SS-20-20H-6 Box of 6 20 x 20 x D SS-20-20H-Eval 1 20 x 20 x D SS-30-20H-3 Box of 3 30 x 20 x D SS-30-20H-6 Box of 6 30 x 20 x D SS-30-20H-Eval 1 30 x 20 x 14 12

Splash-Guard Shield Splash-Guard is a simple lab helper. It is a convenient way to provide bench chemists with a safer, well defined more comfortable work area.

Position several of the shields at intervals along the bench to keep different set-ups from encroaching on each other. Guard your project from the mishaps of nearby activities or persons.

Catalog Number Dimensions Description Weight 108C SHG-1 24" x 24" Transparent Acrylic 12 Water-Flow Monitor WFM/1500 Used for the control of cooling water in open flow systems on the bench top.

5 Splash-Guard Shield Splash-Guard is a simple lab helper. It is a convenient way to provide bench chemists with a safer, well defined more comfortable work area. Set it on the lab bench close to the sink to keep water from splashing on nearby apparatus. Position several of the shields at intervals along the bench to keep different set-ups from encroaching on each other. Guard your project from the mishaps of nearby activities or persons. GREAT FOR SCHOOL LABS. Catalog Number Dimensions Description Weight 108C SHG-1 24" x 24" Transparent Acrylic 12 Water-Flow Monitor WFM/1500 Used for the control of cooling water in open flow systems on the bench top. This compact unit will monitor liquid flow rates from 0.1 liter/min. to 2 liters/ min. If flow drops, WATER-FLOW MONITOR TM will switch OFF power to its two outlets. One outlet can be used for a solenoid valve in the water supply line and the other to shut OFF electrical equipment such as a heater. Model WFMT can handle flow rates up to 22 liter/min Catalog Number Voltage Description Electrical Rating Product Weight (lbs) 108A WFM/ Switched 120 VAC 1500W 3 108A WFMT/ Switched 120 VAC 1500W 3 Spill Alarm & Cut-Off This handy device will turn electrical equipment OFF or ON if the Sensor detects a spill on the bench or floor - wherever the sturdy acrylic sensing block is placed. An audible alarm sounds during a spill condition. A solenoid installed in the water supply line and plugged into the Controller will turn OFF the water if there is a break in the line. Catalog Number Voltage Description Electrical Rating Product Weight (lbs) 108A SP SPILL ALARM & CUT OFF with Sensor block on 6' cable. 1500W 5 108A SP-AB N/A Sensor, acrylic block N/A 1

6 Accessories for Water-Flow Monitor The sketch to the right shows various accessories you may want to install in your water flow system. They are keyed by letter designation to the description/price listing. Catalog Number Description Weight (lbs) 108A WPR Pressure Regulator (A) 1 108A WSV Solenoid Valve with 6' Cable (B) 1 108A WPG Pressure Gauge, C 1 108A WAV Adjustable Valve (D) 1 108A WCF Connection Fittings, E 1 108A WFF Water Filter (F) 1 108A WMA-1 Manifold Assembly (A thru E) 5 108A WMA-2 Manifold Assembly (A thru F) 5 Hotspot Here's a heat lamp unit that's ideal for lab work. It's easy to clamp to apparatus frames or ring stands. It has a multi-directional swivel joint that lets you aim it where you want, and it is steady enough to stay aimed. This HOTSPOT heat lamp will keep you and your safety committee happy. HOTSPOT comes complete with 250W infrared lamp, integral 1/2" support rod, and 6' 3-wire cord. Plugs into any standard grounded outlet. Catalog Number Description Shipping Weight 108A HS watt visible infra red heat lamp with variable intensity control, 120V 6 lbs. R Infra-Red Lamp 250 Watt 1 lbs.

Lead Donut Stabilizers The open "split ring" design of Glas-Col's LEAD DONUT Stabilizer permits adjusting it to accommodate tubulations, shapes and other apparatus where a closed lead ring cannot be

) Volumetric Flasks Graduated Cylinders Erlenmeyer Flasks Approx.Weight (Grams) Shipping Weight (lbs.

Blue 10-1000- 2000ml 750-1500ml 1200 3 108B LD-15C Orange 15 - - 2L 1750 4 108B LD-20D Blue 20 - - 4 and 6 L 3800 9 108B LD-VP1 (one each of LC- 10ml,LD-4B,LD-5C,LD-7C,LD- 10C,LD-15C) 108B LD-VP2

7 Lead Donut Stabilizers The open "split ring" design of Glas-Col's LEAD DONUT Stabilizer permits adjusting it to accommodate tubulations, shapes and other apparatus where a closed lead ring cannot be used. The cushiony PVC coating protects the user and will not mark or scratch bench tops and labware. Catalog Number Color Approx Inside Dia. (cm.) Volumetric Flasks Graduated Cylinders Erlenmeyer Flasks Approx.Weight (Grams) Shipping Weight (lbs.) 108B LC-10ML Orange 2 10ml 5-10ml B LD-4B Red ml 25ml 25ml B LD-5C Orange ml ml ml B LD-7C Red ml ml B LD-10C Blue ml ml B LD-15C Orange L B LD-20D Blue and 6 L B LD-VP1 (one each of LC- 10ml,LD-4B,LD-5C,LD-7C,LD- 10C,LD-15C) 108B LD-VP2 (two each of LC- 10ML,LD-4B,LD-5C,LD-7C,LD- 10C,LD-15C) ** *** Lead Cuff Stabilizers LEAD CUFF Stabilizer is a PVC coated pliable lead strip that can be opened and closed to fit straight-side plastic labware. LEAD CUFF will prevent lightweight labware such as plastic bottles, filtering flasks, and other apparatus from tipping. Keeps your labware upright and protects against dangerous spills. Catalog Number Fits Labware Dia. Min. I.D./ Max I.D. Approx. Weight (grams) Shipping Weight 108B LC to 65 mm B LC to 80 mm B LC to 100 mm B LC to 125 mm 750 3

8 Round Bottom Glassware Support Here's a real breakthrough in the safe use of 12 and 22 liter roundbottom flasks. The support system holds the flask safely in a cradle even when the heating mantle has been removed or lowered. It also provides for safe pouring from the flask by simply tilting the cradle. The support cradle for TILT-N-POUR is a sling of Fiberglas webbing, hung from a sturdy frame. When you want to pour off the contents in the flask, the supporting frame can be easily unlocked and tilted without disturbing the flask itself. Catalog Number Description Shipping Weight (lbs.) 108C TNP-1A Tilt-n-pour extra webbing set included C TNP-RW Replacement webbing Hulman Street., P.O. Box 2128, Terre Haute, IN USA Phone. (812) , Fax. (812) pinnacle@glascol.com 2/12 Rev 0

Laboratory Carts & Benches

Laboratory Carts & Benches Labconco Laboratory Carts and Benches fit in every lab. These versatile carts have endless uses from transporting equipment and supplies to providing auxiliary bench space. Labconco