forest dental australia affordable excellence + designer friendly

Transcription

1 Component Catalogue 204

2 table of contents section pages light service items handpiece controls arm systems syringes foot controls vacuums holders valves accessories fittings tubing service items light service items handpiece controls arm systems syringes foot controls vacuums holders valves accessories fittings tubing service items

3 light service items visual identification: Note: Part numbers with the description function with the following light models: Models: S Models: Models: S2000/9000/ face shield knob style, faro S2000/9000/900 forest faro S90 $ face shield retainer faro S2000 on/off switch forest 4 prong, $ switch extension, faro S200, forest $8.00 reflector faro S2000, S90 forest $, $ bulb faro S70/S90/ S2000, forest/9000/900 (24V, 50 W) $ forest , For prices please see separate price list 2

4 light service items bulb socket faro S90/S2000 forest $ $50.00 bulb shield faro S90/S2000 forest $50.00 $ wire harness faro S2000 yoke, low voltage, socket to swtich $ faro S90/S2000 transformer to switch, arm, high voltage, 3-wire $ faro S90 head to transformer, yoke, low voltage, 2 wire $ faro S2000 drop light, ceiling mount, 3-wire $ faro S90 drop light, ceiling mount, 2-wire $ For prices please see separate price list 3

5 handpiece controls air and water accessory panel 2 Standard features include: 3 female air quick disconnect Toggled shut off for air quick disconnect / 4 female water quick disconnect Flow adjustment for water quick disconnect 4 x 3 flush mount panel White powder coat finish air and water accessory panel $65.00 ancillary shelf Standard features: Accomodates additional ancillary products Designed for easy access to installed devices Powder coat aluminum Available for Standard IC shelf kit with mounting hardware $ watt universal power supply Required when using two or more ancillary devices, or when using a Forest Operatory light and any Forest ancillary product (excluding the 3900 soft-touch massager power source) Provides power for multiple electrical accessories such as: fiber-optics, heated syringe tubing, operatory lights, scalers, curing lights and electric micro motors Size: Easily fits in all Forest floor boxes Quick disconnect connectors for all of Forest ancillary products Built in air-electric switch, enables power source to turn on/off with pilot air Available in both 230 volt and 0 volt Auto-resettable circuit breaker switch: inbuilt overcurrent and over temperature protection, eliminating the need for manually changing fuses or circuit breakers volt $ volt $ For prices please see separate price list 4

6 arm systems 2 diameter ring mount flexible arm systems Flexible counter balanced arm system with pneumatic brake. Provides 27 vertical travel using the 24 flexible arm. Accommodates arm mounted HP control systems with tubing bundles concealed and protected within the arm. Adjustable for weights from 3 to 3½ lbs. Designed for use with 2 diameter post rigid w flexible arm, horizontal reach rigid w/24 flexible arm, horizontal reach rigid w flexible arm, horizontal reach rigid w/ 24 flexible arm, horizontal reach 66 $ $ $ $ top post mount flexible arm systems Flexible counter balanced arm system with pneumatic brake. Provides 27 vertical travel using the 24 flexible arm. Accommodates arm mounted HP control systems with tubing bundles concealed and protected within the arm. Adjustable for weights from 3 to 3½ lbs. Designed for use with 2 diameter control post with ½ ID bearing or Arm Mount III (see page 6, p/n 0-376) rigid w /8 flexible arm, horizontal reach 26 2 rigid w /24 flexible arm, horizontal reach rigid w /8 flexible arm, horizontal reach rigid w /24 flexible arm, horizontal reach rigid w /8 flexible arm, horizontal reach rigid w /24 flexible arm, horizontal reach 66 $ $ $ $ $ $ flexible arm Flexible counter balanced Arm System with pneumatic brake. Provides 27 vertical travel. Accommodates arm mounted HP control systems with tubing bundles concealed and protected within the arm. Adjustable for weights from 3 to 3½ lbs. Designed for use with either top post or ring mounted rigid arm flexible arm $ flexible arm $ For prices please see separate price list 5

7 arm systems 2 diameter ring mount rigid arm Accommodates all lengths of flexible arms with tubing bundles concealed within the arm. Designed for use with 2 diameter post rigid arm 26 rigid arm $ $ top post mount rigid arm Accommodates all lengths of flexible arms with tubing bundles concealed within the arm. Designed for use with 2 diameter control post with ½ inner diameter bearing or Arm Mount III (p/n 0-376, see below) top post mount 22 top post mount 26 top post mount $ $ $ bent rigid arm Accommodates all lengths of flexible arms with tubing bundles concealed within the arm. Designed for use with 2 diameter control post with ½ inner diameter bearing or Arm Mount III (p/n 0-376, see below) top post mount $ wall mount Designed for mounting all top mount arms to any flat vertical surface and provides leveling adjustment. Mounting plate 6 x arm mount III wall mount Designed for clamping a 2 diameter post to adapt to a flat vertical surface and provides leveling adjustment. Mounting plate 6 x post mount IV $85.00 For prices please see separate price list 6

8 arm systems telescoping arm system Designed for mounting assistant s accessories and accepts ½ outside diameter pin. Includes: Telescoping arm, 33 to 56 3 / 4 reach Rigid arm 7 3 / 4 2 diameter post mount Safety release (Order holder separately) post mount $ folding arm rigid section Accepts ½ outside diameter pin. Recommended: Three sections maximum section 2 section 8 section $65.00 $60.00 $55.00 assistant s holder bar For use with folding or telescoping arm systems. Accepts standard individual vacuum and universal holders. Includes: Holder bar, 8 ½ outside diameter pin holder bar $55.00 assistant s holder Universal holder for use with folding or telescoping arm systems. Includes ½ outside diameter pin tri (3 universal) quad (4 universal) $25.00 $30.00 For prices please see separate price list 7

9 arm systems assistant s holder Standard holder for use with folding or telescoping arm systems. Includes ½ outside diameter pin tri (2 universal, standard) quad (3 universal, standard) $25.00 $30.00 assistant s holder Standard holder for use with folding or telescoping arm systems. Includes ½ outside diameter pin tri ( universal, 2 standard) quad (2 universal, 2 standard) $25.00 $30.00 utility shelf assembly Utility Shelf pivots on mounting bracket to provide easy access. 2 x 2 storage surface. Powder coated finish. Includes: Utility shelf, 2x 2 Mounting bracket diameter post mount (includes ) counter top mount (includes 0-377) wall mount (includes 0-378) 2 diameter mobile stand mount (5 angle) $95.00 $95.00 $ tub & tray holder For use with flexible or telescoping arm systems, the Tub & Tray Holder pivots on a rigid arm to provide easy access. Powder coated finish. Includes: Utility shelf, 8 3 x 2 ½ 2 rigid arm Tray pivots utility shelf $60.00 For prices please see separate price list 8

10 arm systems arm mounted tray I Designed for use with flexible or folding arm systems. May be used as a holder for plastic or stainless steel trays. Includes: Stainless steel tray holder, 9 ¾ 3 ½ Wrap around holder bar, ½ diameter Maximum weight 5 lbs for folding arms for forest flex $20.00 $ arm mounted tray II Designed for use with folding or telescoping arm systems. May be used as a holder for plastic or stainless steel trays. Includes: Stainless steel tray holder, 9 ¾ 3 ½ Mounting bracket with ½ outside diameter pin Wrap around holder bar, ½ diameter without holder bar with holder bar $20.00 stainless steel tray Stainless steel size b tray, 9¾ x 3½ $69.00 plastic molded tray Molded plastic with nonslip bottom size b tray, 9 5 x 3 3, white $ B size b tray, 9 5 x 3 3, black $5.00 For prices please see separate price list 9

11 arm systems folding/telescoping arm mounts Designed for mounting folding and telescopting arm systems to 2 diameter post. Accepts ½ outside diameter pin post mount $50.00 counter top mount Designed for mounting folding and telescoping arm systems to any flat surface. Mounting plate 4 x 4. Accepts ½ outside diameter pin counter top mount $69.00 wall mount Designed for mounting folding and telescoping arm systems to any flat vertical surface. Mounting plate 4 x 4. Accepts ½ outside diameter pin folding/telescoping arm mount, wall mount $69.00 mounting bracket III Designed for mounting any counter surface on folding and telescoping arm systems. Mounting plate 4 x 4. Accepts ½ outside diameter pin mounting bracket III $69.00 For prices please see separate price list 0

12 syringes forestar-3 standard syringe assembly Provides variable control for air, water and spray. Includes: Universal autoclavable quick disconnect tip Tubing Service Tool flow adjustment block: syringe only without tubing: $ with flow adjustment block: straight sterling tubing sheathed sterling tubing straight gray tubing sheathed gray tubing coiled gray tubing straight black tubing sheathed black tubing straight shadow tubing sheathed shadow tubing $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 $30.00 without flow adjustment block: BLK SH straight sterling tubing sheathed sterling tubing straight gray tubing sheathed gray tubing coiled gray tubing straight black tubing sheathed black tubing straight shadow tubing sheathed shadow tubing $0.00 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00 $0.00 For prices please see separate price list

13 syringes forestar-3 straight syringe flow adjustment block: Provides fingertip control for air, water and spray. Includes: Universal autoclavable quick disconnect tip Tubing Service tool syringe only without tubing: $25.00 with flow adjustment block: sheathed sterling tubing sheathed gray tubing sheathed black tubing sheathed shadow tubing $45.00 $45.00 $45.00 $45.00 without flow adjustment block: sheathed sterling tubing sheathed gray tubing sheathed black tubing sheathed shadow tubing $25.00 $25.00 $25.00 $25.00 For prices please see separate price list 2

14 syringes forestar-3 standard heated syringe: air actuated on/off The Forestar-3 Standard Heated Syringe provides instant warm water at the syringe tip during normal operations. A heated element within the syringe tubing tempers the water as it advances through the system. Note: Replacement tubing: see page 7 Includes: Standard syringe with universal autoclavable quick disconnect tip Power source with high/low and on/off controls Tubing Low voltage wire, 0 0 VAC sheathed sterling tubing sheathed gray tubing coiled gray tubing sheathed black tubing sheathed shadow tubing $ $ $ $ $ forestar-3 straight heated syringe: air actuated on/off The Forestar-3 Straight Heated Syringe provides instant warm water at the syringe tip during normal operations. A heated element with in the syringe tubing tempers the water as it advances through the system. Note: Replacement tubing: see page 7 Includes: Straight syringe with universal autoclavable quick disconnect tip Power source with high/low and on/off controls Tubing Low voltage wire, 0 0 VAC sheathed sterling tubing sheathed gray tubing sheathed black tubing sheathed shadow tubing $ $ $ $ For prices please see separate price list 3

15 syringes heated syringe conversion kit: air actuated Adapts to existing 3-way syringes to provide instant warm water during normal operations. Note: Replacement tubing: see page 7. 4 Includes: Power source with variable temperature and on/off controls ( / 2 amp fuse, volts 0 / 2-2 with load applied) Size 2 3 / 4 x 5 x 2 / 2 Tubing Low voltage wire, 0 0 VAC power source only sheathed sterling tubing sheathed gray tubing coiled gray tubing sheathed black tubing sheathed shadow tubing $ $ $ $ $ $ syringe tip kit, universal For all Forestar-3 syringes. Includes: One autoclavable syringe tip, nut and adapter Brown Viton o-ring syringe tip kit $27.00 locking syringe tip kit, forest Locking syringe tip for Forestar-3 syringe. Includes nut, cone, o-rings, adapter and allen wrench o-ring kit locking syringe tip kit $3.50 $6.00 For prices please see separate price list 4

16 syringes autoclavable syringe tip kit (325 F), forest Syringe tip for Forestar-3 syringe (prior to 998) autoclavable syringe tip () syringe tip (package 5) $9.00 $45.00 autoclavable syringe tip kit (325 F), universal Syringe tip for Forestar-3 & Asepsis-3 syringe (after to 998) universal (package 5) universal (package 50) $ syringe replacement cartridge Fits Forestar-3 syringe non-autoclavable with black o-rings autoclavable with brown o-rings $5.00 $6.00 syringe replacement cartridge kit Fits Forestar-3 syringe autoclavable with brown o-rings $ non-autoclavable with black o-rings $30.00 syringe button assembly Syringe button assembly for Asepsis-3 and Parts Warehouse syringe spool valve spool valvue kit (2 buttons, springs & pin) $5.25 $25.00 For prices please see separate price list 5

17 syringes syringe service tool Used for removal of cartridge, tip adapter and barbs. For Forestar-3 syringe syringe service tool $.50 4 flow adjustment block Provides air/water metering to syringe. Includes / 6 & barbs, washers and sleeves flow adjustment block $20.00 syringe o-ring kit, forest Includes all o-rings and service tool. For Forestar-3 syringe autoclavable non-autoclavable $4.00 $6.00 asepsis-3 syringe repair kit Syringe repair kit for Asepsis-3, DCI and Parts Warehouse syringe spool valve $0.00 For prices please see separate price list 6

18 foot controls standard foot control Die cast base Chrome plated cover Light touch, variable speed High Volume Vinyl tubing, 7 Note: The water coolant relay ensures water coolant is available with light foot pressure on the foot control cover. Service kits, see page without water coolant relay, sterling tubing with water coolant relay, sterling tubing without water coolant relay, gray tubing with water coolant relay, gray tubing without water coolant relay, black tubing with water coolant relay, black tubing without water coolant relay, shadow tubing with water coolant relay, shadow tubing $0.00 $0.00 $0.00 $ with chip blower button Includes all the features of the standard foot control above, plus toe operated momentary valve for chip blower. Note: The water coolant relay ensures water coolant is available with light foot pressure on the foot control cover. Service kits, see page 83. part number description without water coolant relay, sterling tubing with water coolant relay, sterling tubing without water coolant relay, gray tubing with water coolant relay, gray tubing without water coolant relay, black with water coolant relay, black tubing without water coolant relay, shadow tubing with water coolant relay, shadow tubing price $87.00 $87.00 $87.00 $87.00 For prices please see separate price list 7

19 foot controls wet/dry with on/off toggle Includes all the features of the standard type (see page 7) plus toggle valve for control of water coolant. Note: The water coolant relay ensures water coolant is available with light foot pressure on the foot control cover. Service kits, see page without water coolant relay, sterling tubing with water coolant relay, sterling tubing without water coolant relay, gray tubing with water coolant relay, gray tubing without water coolant relay, black tubing with water coolant relay, black tubing without water coolant relay, shadow tubing with water coolant relay, shadow tubing $87.00 $87.00 $87.00 $87.00 wet/dry toggle and chip blower button Includes all the features of the standard type (see page 7 ) plus toggle valve for control of water coolant and toe operated momentary valve for chip blower. Note: The water coolant relay ensures water coolant is available with light foot pressure on the foot control cover. Service kits, see page without water coolant relay, sterling tubing with water coolant relay, sterling tubing without water coolant relay, gray tubing with water coolant relay, gray tubing without water coolant relay, black tubing with water coolant relay, black tubing without water coolant relay, shadow tubing with water coolant relay, shadow tubing $80.00 $97.00 $80.00 $97.00 $80.00 $97.00 $80.00 $97.00 For prices please see separate price list 8

20 foot controls support shelf Provides storage for foot control while allowing cart mobility. For 2 diameter post only foot control support shelf $80.00 chip blower button kit Designed for adding chip blower feature to existing foot controls (not for use with standard foot control). Includes valve and mounting hardware. Note: Order foot control tubing separately, see page way, chip blower way, chip blower kit $50.00 wet/dry kit Designed for adding wet/dry toggle feature to existing foot controls (not for use with standard foot control). Includes valve and mounting hardware. Note: Order foot control tubing separately, see page 72. part number description wet/dry toggle kit price G gray, toggle only (package 0) $ BLK black, toggle only (package 0) $ G gray, toggle (package 2) $ BLK black, toggle (package 2) $5.00 For prices please see separate price list 9

21 vacuums universal assistant kit (325 F) image coming soon Used with central vacuum. Includes: Central vacuum canister with disposable solids collector Autoclavable universal central vacuum lever valve with tubing, 5 Autoclavable saliva ejector tip valve with tubing, 5 Forestar-3 standard syringe with tubing, 5 Three position holder Mounting hardware part number mount page # description price Sterling Gray Black Shadow fixed position horizontal swing vertical swing without holder $ $ $ $ standard assistant kit (325 F) Used with central vacuum. image coming soon Includes: Central vacuum canister with disposable solids collector Autoclavable standard central vacuum lever valve with tubing, 5 Autoclavable saliva ejector tip valve with tubing, 5 Forestar-3 standard syringe with tubing, 5 Three position holder Mounting hardware mount part number page # description price Sterling Gray Black Shadow fixed position horizontal swing vertical swing without holder $ $ $ $ For prices please see separate price list 20

22 vacuums autoclavable universal central vacuum kit, 325 F image coming soon Used with central vacuum. Includes: Central vacuum canister with disposable solids collector Autoclavable central vacuum lever valves (2) with tubing, 5 Autoclavable saliva ejector tip valve () with tubing, 5 Three position holder Mounting hardware mount part number page # description price Sterling Gray Black Shadow fixed position horizontal swing vertical swing without holder $ $ $ $ autoclavable standard central vacuum kit (325 F) Used with central vacuum. image coming soon Includes: Central vacuum canister with disposable solids collector Autoclavable central vacuum lever valves with tubing, 5 Autoclavable saliva ejector tip valve with tubing, 5 Three position holder Mounting hardware mount part number page # description price Sterling Gray Black Shadow fixed position horizontal swing vertical swing without holder $ $ $ $ For prices please see separate price list 2

23 vacuums autoclavable high volume evacuator valve (HVE) (325 F) image coming soon Autoclavable HVE features finger tip on/off and flow control with unique lever operated design. Swivel quick disconnect allows 360 degrees rotation of entire HVE and installs on any ½ inside diameter central vacuum tubing. After HVE is installed on tubing, it can be removed at the swivel to allow autoclaving of HVE assembly (lever, body, and o-rings). Universal valve has one piece adapter for use with universal HP holders. Note: Replacement o-rings p/n (#3), see page deluxe standard deluxe universal $45.00 $ image coming soon autoclavable saliva ejector valve (325 F) Features finger tip on/off and flow control with unique lever operated design. Swivel quick disconnect works with universal holders allowing for 360 degrees rotation of entire saliva ejector and adapts to any 3 outside diameter saliva ejector tubing. After saliva ejector is installed, it can be removed at the base to allow autoclaving of saliva ejector assembly (lever, body and o-rings). HVE s accept 7 / 6 outside diameter tips. Note: Replacement o-rings p/n (#8), see page BLK deluxe saliva ejector with gray tip deluxe saliva ejector, with black tip $40.00 $40.00 saliva ejector tip For use with saliva ejector or assemblies. Autoclavable saliva ejector tip autoclavable, black autoclavable, gray $5.00 $5.00 For prices please see separate price list 22

24 vacuums saliva ejector screen Fits push-on or screw on style saliva ejector assemblies saliva ejector screen $0.35 levers For HVE and saliva ejector. Allows for on/off and flow control with use of finger tip. Both levers are autoclavable (325 F). Note: Replacement HVE lever for part numvers /00-25 Note: Replacement saliva ejector BLK HVE valve, black HVE valve, gray saliva ejector valve, gray saliva ejector valve, black $3.25 $3.25 $2.25 $ plug Stops suction and allows saliva ejector and HVE to be placed in universal holders after the saliva ejector/ HVE have been removed for autoclaving or cleaning plug $.00 vacuum canister, ½ rear drain with locking lid image coming soon Features removable solids collector, two high velocity ports for ½ inside diameter tubing, one saliva ejector port for 3 inside diameter tubing, extra port plugs, bayonet type locking lid and rear drain. For use with telescoping arm systems BLK solids collector, blue (package 0) canister assembly, white canister assembly, black $8.00 $45.00 $45.00 For prices please see separate price list 23

25 vacuums central vacuum Features removable solids collector, two HVE, one Saliva ejector port, optional / 2 water drain port for 3 inside diameter tubing, optional water drain port for U.C., extra port plugs, mounting brackets and hardware BLK BLK canister assembly, gray canister assembly, black cap & o-ring only, gray cap & o-ring only, black o-ring only solids collector, 7 outside diameter, green (package 0) central vacuum horizontal bracket, gray central vacuum horizontal bracket, black central vacuum vertical bracket, gray central vacuum vertical bracket, black $40.00 $40.00 $6.50 $6.50 $0.75 $8.00 $3.00 $3.00 $3.00 $3.00 vacuum canister, ½ drain with locking lid Features are the same as above, except with bayonet type locking lid BLK BLK canister assembly, gray canister assembly, black cap & o-ring only, gray cap & o-ring only, black o-ring only solids collector, 7 outside diameter, green (package 0) central vacuum horizontal bracket, gray central vacuum horizontal bracket, black central vacuum vertical bracket, gray central vacuum vertical bracket, black $40.00 $40.00 $6.50 $6.50 $0.75 $8.00 $3.00 $3.00 $3.00 $3.00 central vacuum canister plug BLK BLK saliva ejector port, white saliva ejector port, black central vacuum port, white central vacuum port, black $0.35 $ 0.35 $0.50 $0.50 For prices please see separate price list 24

26 vacuums solids collector For use with central vacuum canisters. Green fits 7 p/n 400-/400-0 standard and p/n / (page 24) locking cannister assemblies. Blue fits 2 p/n / BLK (page 23). 5 rear drain cannister assembly green (package 0) blue (package 0) $8.00 $8.00 solids collector with lid For use with central vacuum canisters. Small- fits p/n 400-/ (page 24) standard and p/n / (page 24) locking canister assembly. Large- fits p/n / BLK (page 23), 5 rear drain canister assembly clear, small (each) $ clear, large (each) $.5 6 post mount adapter Allows either central vacuum canister, p/n s 400-/400-0 (page 24) or / (page 24), to be mounted to a 2 outside diameter post post mount adapter $50.00 saliva ejector adapter Adapts 3 outside diameter saliva ejector tubing to vacuum valve using 7 / 6 outside diameter tips / 4 inside diameter x 7 / 6 inside diameter $0.00 saliva ejector adapter Adapts 3 outside diameter saliva ejector tubing to Saliva ejector tip / 4 inside diameter x / 4 inside diameter $3.00 For prices please see separate price list 25

27 vacuums oral dry cup Autoclavable polysulfone (beige). Fit all vacuum valves that accept 7 / 6 diameter tips oral dry cup $5.00 standard HVE disposable tip Made of lightweight polyethylene, 7 / 6 outside diameter x 6 long package 00 cuspidor strainer and cover Molded plastic. Fits Forest cuspidor bowl package 50 $ package 0 $85.00 vacuum drain cuspidor kit May be used to adapt all models of gravity drain cuspidor to central vacuum system. Includes: Vacuum drain valve Flush nipple Filter assembly Tubing Installation hardware for 5 inside diameter drain for 7 inside diameter drain replacement bowl, screen & gasket kit $ $ image coming soon air/water saliva ejector Air/ water powered saliva ejector. Includes: Vacuum generator (venturi) Saliva ejector tip with tubing, 6 Toggle valve ½ inside diameter drain tubing, 9 Installation hardware sterling tubing gray tubing black tubing shadow tubing $ $ $ $ For prices please see separate price list 26

28 vacuums saliva ejector hose assembly Saliva ejector assembly adapts to any vacuum valve using 7 / 6 outside diameter tips sterling tubing gray tubing black tubing shadow tubing $25.00 $25.00 $25.00 $25.00 automatic dual air vacuum system Air-operated oral evacuation system activated by automatic holders. Includes: Autoclavable HVE with tubing, 5 Autoclavable saliva ejector with tubing, 5 Two automatic holders Dualport venturi One quart ( liter) waste container Air pilot valve sterling tubing gray tubing black tubing shadow tubing $ $ $ $ manual dual air vacuum system Air-operated oral evacuation system activated by manual toggle valve. White standard vacuum lever valve with tubing, 5 Autoclavable HVE with tubing, 5 Autoclavable saliva ejector with tubing, 5 Two standard holders Dual port venturi One quart ( liter) waste container Three-way toggle valve sterling tubing gray tubing black tubing shadow tubing $ $ $ $ For prices please see separate price list 27

29 holders automatic holder for handpieces Holder assembly with micro valve and actuator. Provides air signal to automatic control block for holdback when HP is placed into the holder. Micro valve and actuator On/off lockout toggle with indicator (where applicable) Non-marring, plastic holder G SH BLK WH G SH BLK WH with lockout toggl, gray with lockout toggle, black without lockout toggle, gray molded, notched, forest grey/sterling molded, notched, shadow molded, notched, black molded, notched, white molded, forest grey/sterling molded, shadow molded, black molded, white $55.00 $55.00 $40.00 automatic holder for accessories Holder assembly with micro valve and actuator, provides air signal to an accessory, such as an air electric switch, while HP is out of the holder. Micro signal valve and actuator On/off lockout toggle red indicator (where applicable) Non-marring, plastic holder images coming soon : & G SH BLK WH G SH BLK WH with lockout toggle, black with lockout toggle, gray molded, notched, forest grey/sterling molded, notched, shadow molded, notched, black molded, notched, white molded, forest grey/sterling molded, shadow molded, black molded, white $55.00 $55.00 For prices please see separate price list 28

30 holders automatic holder, standard vacuum G SH BLK WH G SH BLK WH molded, forest grey/sterling molded, shadow molded, black molded, white molded, notched, forest grey/sterling molded, notched, shadow molded, notched, black molded, notched, white electric automatic holder Holder incorporates a low voltage, normally open or normally closed switch for activation of an electrical accessory when the HP is out of the holder. Normal state of the switch is when the saliva ejector or accessory is in holder. Underwriters Laboratories listed low voltage switch with 24 pigtail Lockout toggle with indicator (where applicable) part number normally open: normally closed: normally open: G SH BLK WH normally closed: G SH BLK WH description with lockout toggle, black without lockout toggle, gray with lockout toggle, gray with lockout toggle, black without lockout toggle, gray with lockout toggle, gray molded, forest grey/sterling molded, shadow molded, black molded, white molded, forest grey/sterling molded, shadow molded, black molded, white price $69.00 $54.00 $69.00 $69.00 $54.00 $ normally open: G SH BLK WH molded, forest grey/sterling molded, shadow molded, black molded, white For prices please see separate price list 29

31 image coming soon holders electric automatic holder Holder incorporates a low voltage, normally open or normally closed switch for activation of an electrical accessory when the HP is out of the holder. Normal state of the switch is when the saliva ejector or accessory is in holder. Underwriters Laboratories listed low voltage switch with 24 pigtail Lockout toggle with indicator (where applicable) normally closed: G SH BLK WH molded, notched, forest grey/sterling molded, notched, shadow molded, notched, black molded, notched, white vacuum holder, electric Holder incorporates a low voltage, normally open or normally closed switch for activation of an electrical accessory when the HP is out of the holder. Normal state of the switch is when the HVE is in holder. 7 Underwriters Laboratories listed low voltage switch with 24 pigtail On/off lockout toggle with indicator (where applicable) Non-marring, plastic holder normally open: G SH BLK WH G SH BLK WH normally closed: G SH BLK WH with lockout toggle, gray molded, forest grey/sterling molded, shadow molded, black molded, white molded, notched, forest grey/sterling molded, notched, shadow molded, notched, black molded, notched, white without lockout toggle, gray with lockout toggle, gray molded, forest grey/sterling molded, shadow molded, black molded, white $69.00 $59.00 $69.00 For prices please see separate price list 30

32 holders universal holder Holder assembly for use with HP, syringe, saliva ejector or universal HVE. Non-marring, plastic holder G SH BLK WH G SH BLK WH universal, black universal, gray molded, notched, forest grey/sterling molded, notched, shadow molded, notched, black molded, notched, white notched, forest grey/sterling notched, shadow notched, black notched, white $7.00 $ standard vacuum holder Non-marring, plastic holder G SH BLK WH G SH BLK WH standard, black standard, gray molded, forest grey/sterling molded, shadow molded, black molded, white molded, notched, forest grey/sterling molded, notched, shadow molded, notched, black molded, notched, white $7.00 $7.00 For prices please see separate price list 3

33 holders automatic holder, standard vacuum Non-marring, plastic holder G SH BLK WH G SH BLK WH molded, forest grey/sterling molded, shadow molded, black molded, white molded, notched, forest grey/sterling molded, notched, shadow molded, notched, black molded, notched, white avs handpiece holder Non-marring, plastic holder gray $3.00 replacement holder only Non-marring, plastic holder automatic, black universal, black automatic, gray universal, gray standard vacuum, gray standard vacuum, black avs, gray $0.00 $9.50 $0.00 $9.50 $9.50 $9.50 $5.00 automatic holder micro valve For use with automatic HP or automatic accessory holders HP holder micro valve normally closed accessory holder valve normally open $.00 $.00 For prices please see separate price list 32

34 holders holder bar mounted valve Holder assembly with miniature valve and on/off toggle, provides manual air signal to accessories. Micro signal valve Lockout toggle with indicator Aluminum mounting adapter for / 2 diameter holder bar holder bar mounted valve, gray $68.00 tri holder BLK Delrin, white Delrin, black $65.00 $65.00 quad holder BLK Delrin, white Delrin, black swing mount holder Holder assembly for use with HP, syringe, saliva ejector or universal central vacuum valve. Swivel mount allows holder to pivot for easy access. Delrin holder bar Vertical or horizontal surface swing mount vertical mount vertical surface mount: Delrin tri: 3 universal Delrin quad: 4 universal $45.00 horizontal surface mount: horizontal mount Delrin tri: 3 universal Delrin quad: 4 universal $45.00 For prices please see separate price list 33

35 holders tri holder double HVE BLK Delrin, tri holder double hve, white Delrin, tri holder double hve, black $65.00 $65.00 tri holder with HVE Delrin, tri holder with hve, white $ BLK Delrin, tri holder with hve, black $65.00 quad holder double HVE BLK Delrin, quad holder double hve, white Delrin, quad holder double hve, black 7 quad holder with HVE BLK Quad holder with hve, white Delrin, quad holder with hve, black swing mount holder bar For use with automatic, universal and vacuum HP holders. Swivel mount allows holder bar to pivot for easy access. vertical mount Feautures: / 2 diameter holder bar Vertical or horizontal surface swing mount Holds up to 4 holders horizontal mount Vertical surface mount $ Horizontal surface mount $92.00 For prices please see separate price list 34

36 holders swing mount holder Holder assembly for use with syringe or saliva ejector and two standard central vacuum valves. Swivel mount allows holder to pivot for easy access. Delrin holder Vertical or horizontal surface swing mount vertical mount horizontal mount vertical surface mount: horizontal surface mount: tri: universal, 2 standard quad: 2 universal, 2 standard tri: universal, 2 standard quad: 2 universal, 2 standard $45.00 $45.00 swing mount holder vertical mount Holder assembly for use with syringe, saliva ejector and standard central vacuum valve. Swivel mount allows holder to pivot for easy access. Delrin holder Vertical or horizontal surface swing mount 7 vertical surface mount: tri: 2 universal, standard quad: 3 universal, standard $45.00 horizontal surface mount: horizontal mount tri: 2 universal, standard quad: 3 universal, standard $45.00 assistant s bushing kit swivel bushings (quantity two) $5.00 For prices please see separate price list 35

37 holders fixed mount holder bars For use with automatic, universal and vacuum HP holders. Vertical surface mount / 2 diameter single / 2 duo 4 tri 6 / 4 quad 7 3 / 4 universal 4 3 small universal 0 / 2 $5.00 $9.00 $22.00 $23.00 $27.00 $24.00 wrap around holder bars 7 / 2 diameter holder bar for custom applications holder bar 6 holder bar $32.00 $34.00 holder bar brackets For use with wrap around holder bars. Includes set screws / 2 hole $ without hole $ For prices please see separate price list 36

38 valves toggle valve, on/off Positive on/ off control Brass construction Nickel plated Port size 0-32 Panel mount with nuts, 5/ way without exhaust: BLK G black gray 3-way with exhaust: BLK black G gray toggle only: $9.00 $9.00 $9.00 $ BLK G black gray $.50 $.50 toggle valve, on/off, momentary Positive on/ off control Brass construction Nickel plated Port size 0-32 Panel mount with nuts, 5/ Note: No toggle only for black. 2-way without exhaust: BLK G 3-way with exhaust: BLK G toggle only: black gray black gray $20.00 $20.00 $20.00 $ G gray $.50 For prices please see separate price list 37

39 valves push button, on/off, momentary Positive on/off control Brass construction Nickel plated Port size /32-32 panel mount with nuts 2-way without exhaust, normally closed: G gray $ way with exhaust: G BLK BLK toggle, normally closed, gray toggle, normally open, black toggle, normally closed, black $25.00 $25.00 $25.00 needle control valve 8 Variable control for air and water Brass construction Nickel plated Port size /32-32 panel mount with nuts Note: See below for knob flow without barbs with long shaft with style II knob & barbs, gray with style II knob & barbs, black $7.00 $20.00 $27.00 $27.00 flow restrictor Variable restriction for air and water (pinch type) Accommodates tubing up to / 4 outside diameter Brass construction Nickel plated Mounts directly on tubing flow restrictor $6.00 For prices please see separate price list 38

40 valves plastic knob Replacement knob for control valves with / 4 outside diameter shaft. style I style I: gray $3.00 style II: style II BLK G black gray $4.00 $4.00 decorative trim nut Decorative panel mount nut, 5/ smooth nut, silver $ valve, on/off: pilot air operated Feautres: Positive on/off control Brass construction Nickel plated / 6 barb fitting Port size 0-32 Mounting hardware 5/ way on/off, without exhaust normally closed 3-way on/off with exhaust normally closed $2.00 $2.00 For prices please see separate price list 39

41 valves valve, on/off: pilot air operated Feautres: Positive on/off control Brass construction Nickel plated / 6 barb fitting Port size way on/off without exhaust, normally open $26.00 check valve Allows air or water flow in one direction only. Feautres: Brass construction Nickel plated / 6 barb fitting Port size check valve $2.00 shuttle valve Designed with two inlets and one outlet. Valve permits free flow from the high pressure side, while blocking the low pressure side. image coming soon For use with air or water Inport (shuttled), 2 Outport, Brass construction Nickel plated / 6 x 0-32 barbs with sleeve shuttle valve $8.50 For prices please see separate price list 40

42 valves water relay valve Designed for on/off control of HP water coolant. Non-retraction Positive on/off control Brass construction Port size way, without exhaust, normally closed $30.00 routing valve Routing control for air or water Brass construction Nickel plated 5/32-32 panel mount with nuts Port size BLK black $ G gray $2.00 valve mounting bracket Used for mounting valves or switches. ½ inside diameter holes single, powder coated dual, powder coated dual, plastic (photo coming soon) $2.00 $5.00 $ automatic handpiece control block Miniature assembly for selection and operation of drive air and air/water coolants for two to four air driven HP. Designed for use with automatic HP holders (see page 28) duo-block (2 HP ) tri-block (3 HP ) quad-block (4 HP ) duo-block diaphragm tri-block diaphragm quad-block diaphragm $50.00 $60.00 $80.00 $3.00 $3.25 $7.35 For prices please see separate price list 4

43 valves handpiece logic valve Designed for use with automatic HP holder part number description price pinch style, water coolant on/off ( per HP ) flex valve ( per HP ) $25.00 $ rectangular gauge ½ high x 3 / 4 wide Panel mount 0-32 port For use with air only part number description rectangular gauge (0-60psi) price $ panel mount gauge 5 diameter mpt with 0-32 port For use with air or water part number description panel mount gauge (0-00psi) price $45.00 round gauge MPT fitting with 0-32 port For use with air or water ½ diameter gauge (0-60 psi) diameter gauge (0-60 psi) diameter gauge (0-60 psi) $3.00 $20.00 $20.00 For prices please see separate price list 42

44 valves pneumatic indicator psi operating range 0-32 port 5/32-32 panel mount with nut green indicator: red indicator: black bezel gray bezel black bezel gray bezel $6.00 $6.00 $6.00 $6.00 umbilical cuff Designed to adapt umbilical with spiral flex housing to utility center. Includes mounting hardware. Note: See page 76 for custom umbilicals for 3 / 4 inside diameter tubing 5-09 for inside diameter tubing umbilical cuff 8 Designed to adapt ¼ inside diameter umbilical with spiral flex housing to utility center. Contains set of two cuffs. Note: See page 76 for custom umbilicals umbilical cuff (saliva ejectort of 2) $25.00 umbilical cuff Designed to adapt 2 inside diameter umbilical with spiral flex housing to utility center. Contains set of two cuffs. Note: See page 76 for custom umbilicals umbilical cuff (saliva ejectort of 2) For prices please see separate price list 43

45 valves standard utility center Adjustable air and water pressure regulators with filters Master air and water shut-off valves Aluminum housing, powder coat finish Durable plastic cover Dimensions: 4½ x 9 x complete utility center $ (accepts all umbilical cuffs except 2 ) complete utility center (accepts 2 umbilical cuffs) without housing & cover housing & cover only, std housing & cover only, 2 cover only $ $ $30.00 $ image coming soon vacuum utility center Master air and water shut-off valves Aluminum housing, powder coat finish Durable plastic cover Dimensions: 4½ x 9 x 4 Accepts all umbilical cuffs except standard vacuum utility center $ deluxe vacuum utility center $ deluxe utility center complete deluxe utility center Right umbilical access Air and water pressure regulator with filter Master air and water shut-off valve Aluminum housing, powder coat finish Durable plastic cover Dimensions: 7x 3 5 / 6 x 2 / 4 Accepts 3 / 4 umbilical cover G SH BLK WH forest grey shadow black white $ $ $ $ For prices please see separate price list 44

46 valves deluxe utility center housing & cover image coming soon Aluminum housing, powder coat finish Durable plastic cover Dimensions: 7x 3 5 / 6 x 2 / 4 Accepts 3 / 4 umbilical G SH BLK WH G SH BLK WH rear umbilical access, forest grey rear umbilical access, shadow rear umbilical access, black rear umbilical access, white right umbilical access, forest grey right umbilical access, shadow right umbilical access, black right umbilical access, white $ $ $ $ $ $ $ $ regulator, air or water 0-25 psi operating range Brass body Adjustment knob: pull to unlock and adjust, push to lock Port size ftp Fittings not included regulator regulator with filter Non-relieving regulator for air or water psi operating range Regulator with gauge Mounting bracket Filter with removable element, 35 micron filtration Inlet, ¼ poly fitting Outlet, 0-32 position Barbs ( ) with sleeves included regulator with filter $95.00 For prices please see separate price list 45

47 valves regulator with filter and master shut-off Non-relieving regulator for air or water service psi operating range Regulator with gauge Mounting bracket Filter with removable element, 35 micron filtration Adjustment knob: pull to unlock and adjust, push to lock Inlet, ¼ poly fitting Outlet, 0-32 position Note: Requires / 2 MPT to 3 copper compression fitting (p/n , page 63) to adapt to manual shut-off valve regulator with filter and master shut-off $20.00 in-line filter assembly Nickel plated brass construction 35 micron filter disc Port size, fpt Fittings ¼ poly x mpt diameter x long filter assembly filter only replacement filter disc $30.00 $25.00 $2.50 miniature regulator For air or water service. Nickel plated brass construction Port size, 0-32 Barbs with sleeves included (not included with ) 5/32-32 panel mount with nuts mini regulator, adjustable, 0-50 psi $ mini regulator, in-line fixed, 40 psi regulator mounting bracket Used to mount regulator to wall or cabinet surface regulator mounting bracket $5.00 For prices please see separate price list 46

48 valves master shut-off valve For air or water service. Nickel plated brass construction Inlet, ½ fpt Outlet, ¼ poly fitting / 6 x 0-32 barbs with sleeves Note: Require ½ mpt to 3 copper compression fitting (p/n , page 63) to adapt to manual shut-off valve master shut-off valve $50.00 master shut-off valve kit For remote utility center installation Master shut-off valves (2), / 2 FPT inlet Toggle valve Tubing Fittings Note: Require / 2 mpt to 3 copper compression fitting (p/n , page 63) to adapt to manual shut-off valve master shut-off valve kit $0.00 manual shut-off valve Used at utility center to turn off air or water during installation or service. Chrome finish Inlet ½ ftp Outlet, 3 inside diameter compressin fitting manual shut-off valve $25.00 For prices please see separate price list 47

49 accessories self-contained water system with gauge, single bottle Controlled dispensing system for antiseptic coolant or sterile water. May be used with HP controls and 3-way syringes. High density bottle,.5 liters Mini-air pressure regulator Interconnect tubing Mounting hardware diameter post mount system wall mount system replacement pressure head with gauge replacement water bottle/pressure head w/ gauge replacement washer, urethane $ $ $45.00 $65.00 $3.00 self-contained water system with gauge, dual bottle Controlled dispensing system for antiseptic coolant or sterile water. Manual selection of one of the two bottles. May be used with HP controls and 3-way syringes. High density bottle,.5 liters (2) Mini-air pressure regulator Three-way on/off toggle valve Interconnect tubing Mounting hardware diameter post mount system wall mount system beneath shelf mount system replacement pressure head replacement water bottle/pressure head replacement washer, urethane $ $ $ $28.00 $30.00 $3.00 high density bottle For use with clean water systems. Opaque bottle High density polyethylene (HDPE) high density liter bottle $ high density ½ liter bottle $30.00 For prices please see separate price list 48

50 accessories handpiece illumination system, 5 hole adapter with krypton lamp image coming soon A compact HP illumination system, 5 hole adapter with krypton lamp, that installs easily to any HP control and is compatible with any standard power optic HP. An easy to replace krypton lamp provides brilliant, cool light for intra-oral use. Note: 220 VAC is only offered in a euro style plug. Dual channel outputs individually adjustable from 2VDC to 4VDC Accommodates one additional handpiece tubing Illumination delay (adjustable between 0-25 seconds) can be set individually for two handpieces Automatic activiation of handpiece illumination with the dental unit foot control Simple installation into any new or existing dental unit Indicator LEDs confirms correct operation of the control module Powers all brands of optic handpieces and air-motors ISO standard handpiece terminal with stainless steel nut Asepsis style handpiece tubing, 7 long (4 to 5 installed) Power transformer, output 2VAC,.5 Amps Installation hardware and instructions 0 VAC (60 Hz): STG GRY BLK SHW GRY straight sterling tubing straight gray tubing straight black tubing straight shadow tubing coiled gray tubing $ $ $ $ $ For prices please see separate price list 49

51 accessories handpiece illumination tubing, 5 hole adapter with krypton lamp Used to replace power optic HP tubing. Used to replace power optic handpiece tubing ISO standard power optic handpiece terminal with stainless steel nut 5 hole adapter with krypton lamp Asepsis style handpiece tubing, 7 (4 to 5 factory installed) STG GRY BLK SHW GRY straight sterling tubing straight gray tubing straight black tubing straight shadow tubing coiled gray tubing $ $ $ $ $ image coming soon handpiece illumination system, 6-pin A compact HP illumination system that installs easily to any HP control and is compatible with any ISO-C HP (6-pin). Note: 220 VAC is only offered in a euro style plug. (ce 720) (en 50075) Dual channel outputs individually adjustable from 2VDC to 4VDC Accommodates one additional handpiece tubing Illumination delay (adjustable between 0-25 seconds) can be set individually for two handpieces Automatic activiation of handpiece illumination with the dental unit foot control Simple installation into any new or existing dental unit Indicator LEDs confirms correct operation of the control module Powers all brands of optic handpieces and air-motors ISO standard handpiece terminal with stainless steel nut Asepsis style handpiece tubing, 7 long (4 to 5 installed) Power transformer, output 2VAC,.5 Amps Installation hardware and instructions 0 VAC (60 H z): STG GRY BLK SHW straight sterling tubing straight gray tubing straight black tubing straight shadow tubing $ $ $ $ For prices please see separate price list 50

52 accessories handpiece illumination 6-pin Features ISO-C HP tubing, 7 with connector (6-Pin) STG GRY BLK SHW straight sterling tubing straight gray tubing straight black tubing straight shadow tubing $90.00 $90.00 $90.00 $90.00 transformer image coming soon Note: 220 OVAC is only offered in a euro style plug VAC, 720 ma, 220 VAC $5.00 air actuated electric switch 20 vac, 5 amp switch 5-50 psi operating range 0-32 x / 6 barb fitting 8 awg wire, 6 5/32-32 panel mount with nut normally open normally closed 9 wire nut Used for oralite HP illumination system wire connections in lieu of terminal strip, 6-22 gauge wire nut (package of 0) $2.50 For prices please see separate price list 5

53 accessories time delay kit Time delay module for use with oralite HP illumination system. Easily installed kit retrofits all existing oralite systems. One required per HP. 0 second delay after foot control is released Complete installation instructions time delay kit terminal strip Used for oralite HP illumination system p/n 0-48 (page 55) wire connections circuit $ krypton lamp For use in handpiece illumination system, 3.5VAC, 720mA. Used with , and tubing lamp $80.00 adapter with krypton lamp image coming soon For use in handpiece illumination system, 3.5VAC, 720mA. Used with or system and tubing adapter with lamp $80.00 For prices please see separate price list 52

54 accessories storage organizer with cover For use with storage organizer holders. Storage organizer with removable hinged cover Storage dividers hinge only storage organizer with cover full divider half divider $4.00 $30.00 $4.25 $3.25 mobile stand Powder coat finish Adjustable height, 23 to 32 2 diameter 5 angled upright Mounting plate, 6 x 6 Twin wheel casters small stand, 8 w x 8 d $ For prices please see separate price list 53

55 accessories h-type mobile stand Powder coat paint finish Adjustable height, 26 to 39 2 diameter Vertical upright Mounting plate, 4½ x 6 Twin wheel casters large, 24½ w x 8 d $ control post Powder coat paint finish 2 diameter ½ inside diameter bronze bearing control post, 30 control post with slot, 24 control post, 30 control post with slot, 30 $85.00 $50.00 $65.00 $90.00 post cap Provides finished end for above control posts when using 2 diameter post mount arms. Plastic post cap, control post $20.00 For prices please see separate price list 54

56 accessories post cap Provides finished top for 2 diameter cuspidor posts, powder coat painted post cap, cuspidor post $25.00 cart sleeve Delrin spacer for enlarging diameter of post to accept 2 diameter clamp cart sleeve, spacer, post enlarger $55.00 post clamp 0-56 light post clamp only $60.00 light post extension Designed for used with any 2 diameter post. 9 Powder coat paint finish Light post Post clamp Light adapter Power cord, for pelton & crane, 24 for forest/castle, 24 for forest/ castle, 35 for pelton & crane, 35 $ $ $ $ For prices please see separate price list 55

57 accessories light post Powder coat paint finish 2 outside diameter,.875 +/-.002 inner diameter light post, 24 light post, 40 light post, 30 light post, 44 light post, 35 $25.00 $50.00 $30.00 $50.00 $30.00 bushing Designed to adapt light to above posts BLK pelton & crane.705 +/-.002 inner diameter forest/castle, white.383 +/-.002 inner diameter forest/castle, black.383 +/-.002 inner diameter $30.00 $30.00 $ floor mounted Powder coat painted post, 2 outside diameter x 54 L Powder coat painted base 20V duplex outlet Powder cord Light adapters beside chair: beside chair F PC for forest/castle for pelton & crane $ $ For prices please see separate price list 56

58 fittings adjustable tie length (package 0) 5½ length (package 0) 0 length (package 0) $2.50 $3.5 $4.00 adjustable tie mount Adhesive mount adjustable tie mount (package 0) $.00 clip For use with outside diameter tubing tube clip (package 0) $6.20 image coming soon sleeves inside diameter (package 0) / 4 inside diameter (package 0) $2.30 $ uniclamp inside diameter (package 0) $5.75 For prices please see separate price list 57

59 fittings plastic washer for 6-32 fittings (package 00) for 8-32 fittings (package 00) for 0-32 fittings (package 00) $9.00 $.00 $7.00 plug Includes washers. Plated hex plug, 0-32 (package 0) $4.25 plug socket head plug, mpt (each) $0.65 plug socket head plug, / 4 mpt (each) $ plug Plated barb plug (package 0) $ / 4 barb plug (package 0) $6.50 connector Includes washers coupler, male 0-32 connector (each) $2.30 For prices please see separate price list 58

60 fittings connector Includes washers. Plated / 6 x 6-32 barb (package 0) $ / 6 x 8-32 barb (package 0) $7.50 connector Includes washers and sleeves. Plated / 6 x 0-32 (package 0) $6.50 connector Includes washers and sleeves. Plated barb, x 0-32 (package 0) $6.75 connector / 6 x mpt barb $3.50 connector mpt x barb $2.50 connector x & / 6 stepped barb $6.50 connector in-line, twist to disconnect $4.75 For prices please see separate price list 59

61 fittings connector Includes sleeves. Plastic / 6 x 0-32 barb elbow (package 0) x 0-32 barb elbow (package 0) $.00 $.50 connector Includes sleeves. Plastic / 6 barb tee (package 0) barb tee (package 0) x / 6 x barb tee (package 0) $9.25 $3.50 $9.65 connector Includes sleeves / 6 barb connector (package 0) $ barb connector (package 0) $7.00 connector Includes sleeves. Plastic / 6 x barb connector (package 0) $ connector Includes sleeves. Plastic / 6 barb, Y (package 0) $3.80 connector Plastic / 6 barb cross $ barb cross $2.00 For prices please see separate price list 60

62 fittings connector $ port quick disconnect manifold assembly 8-port quick disconnect manifold assembly 6-port gasket 8-port gasket $50.00 $2.50 $2.50 connector Plated , 4-way cross, female $2.50 connector Plated fpt, 4-way cross $3.50 connector fpt elbow $ / 4 fpm elbow $5.0 connector mpt x fpt elbow $.25 0 connector mpt x 0-32 tee $2.50 connector mpt x 0-32 elbow $2.00 For prices please see separate price list 6

63 fittings connector adjustable elbow $3.75 connector fpt x 0-32 $2.00 connector Plated fpt x 0-32 adapter $3.75 connector Plated mpt x / 4 fpt adapter $.75 connector Plated / 4 mpt x fpt reducer $ / 2 mpt x / 4 fpt reducer $ connector to 3 copper compression $5.00 connector mpt to 3 copper compression $ / 2 mpt to 3 copper compression $.00 connector mpt close nipple $.00 For prices please see separate price list 62

64 fittings connector mpt x 2 nipple $.75 connector Plastic / 2 mpt x / 2 barb connector $.00 connector Plastic / 2 mpt x / 2 barb elbow adapter $.50 connector image coming soon / 2 x 5 adapter / 2 x / 2 adapter $.00 $ x 7 adapter $ / 2 x 7 adapter $.00 connector / 4 poly x mpt / 4 poly x / 4 mpt 3 poly x mpt 3 poly x / 4 mpt $.35 $.85 $.70 $.90 connector / 2 mpt x / 2 barb elbow 3 x 3 poly union 3 x / 4 poly reducing union $.50 $2.00 $5.00 connector / 4 x / 4 poly bulkhead union $6.20 For prices please see separate price list 63

65 fittings connector / 4 poly x mpt elbow $ / 4 poly x / 4 mpt elbow $5.00 connector / 4 poly x 0-32 connector $4.50 connector / 4 poly tee 3 poly tee 3 x 3 x / 4 poly tee $4.50 $8.55 $2.00 connector poly x / 4 fpt / 4 poly x fpt / 4 poly x / 4 fpt $2.50 $.50 $3.30 connector For use with manual shut-off valve (p/n , see page 47) / 4 poly x 3 copper compression $ connector Includes poly sleeves / 4 poly nut (package 0) $ poly nut (package 0) $7.85 connector / 4 poly sleeve (package 0) $ poly sleeve (package 0) $2.50 For prices please see separate price list 64

66 fittings connector / 4 poly plug (package 5) 3 poly plug (package 5) $2.25 $3.25 quick disconnect Plated without shutoff / 4 outside diameter male x / 4 poly $ outside diameter male x 3 poly $25.00 quick disconnect Plated with shutoff / 4 outside diameter male x / 4 poly, water $ outside diameter male x 3 poly, air $25.00 quick disconnect Plated with shutoff / 4 inside diameter female x / 4 poly, water $ inside diameter female x 3 poly, air $25.00 quick disconnect Plated with shutoff / 4 inside diameter female x mpt, water $ / 4 inside diameter female x / 4 mpt, water $ quick disconnect Plated with shutoff / 4 inside diameter female x mpt, water $25.00 For prices please see separate price list 65

67 tubing handpiece tubing, asepsis style (vinyl) 4-hole, straight with midwest terminal sterling gray black shadow handpiece tubing, asepsis style (vinyl) 4-hole, bulk, per foot sterling gray black shadow $.50 $.50 $.50 $.50 handpiece tubing, asepsis style (polyurethane) 3-hole, coiled without terminal gray $22.00 handpiece tubing, asepsis style (polyurethane) 3-hole, coiled with borden terminal: gray $ hole, coiled with midwest terminal: gray $45.00 For prices please see separate price list 66

68 tubing handpiece tubing, asepsis style (polyurethane) 3-hole, straight with borden terminal: sterling gray black shadow $40.00 $40.00 $40.00 $ hole, straight with midwest terminal: sterling gray black shadow $40.00 $40.00 $40.00 $40.00 handpiece tubing, asepsis style (polyurethane) 3-hole, bulk, per foot sterling gray black shadow $.30 $.30 $.30 $.30 handpiece tubing, asepsis style (polyurethane) 4-hole, coiled without terminal gray $22.00 handpiece tubing, asepsis style (polyurethane) 4-hole, coiled with midwest terminal gray $45.00 For prices please see separate price list 67

69 tubing handpiece tubing (polyurethane) -hole, bulk, per foot gray $0.80 handpiece tubing (polyurethane) Large twin hole, straight with midwest teminal sterling gray $34.00 $34.00 handpiece tubing (polyurethane) Large twin hole bulk, per foot sterling $2.45 handpiece tubing (polyurethane) 2-hole, coiled without terminal gray $6.00 handpiece tubing (polyurethane) 2-hole, coiled with borden terminal gray $32.00 For prices please see separate price list 68

70 tubing handpiece tubing (polyurethane) 2-hole, straight with borden terminal gray $32.00 handpiece tubing (polyurethane) 2-hole, bulk, per foot gray $.20 syringe tubing, asepsis style (polyurethane) 2-hole, straight, per foot sterling gray black shadow $0.70 $0.70 $0.70 $0.70 syringe tubing, asepsis style (polyurethane) 3-hole, straight, per foot sterling gray black shadow $.5 $.5 $.5 $.5 For prices please see separate price list 69

71 tubing syringe tubing, asepsis style (polyurethane) 2-hole, coiled gray $4.50 syringe tubing assembly, asepsis style, sheathed 2-hole, polyurethane, sterling gray black shadow $30.00 $30.00 $30.00 $30.00 heated syringe assembly, asepsis style 2-hole, straight, sterling gray black shadow $30.00 $30.00 $30.00 $30.00 image coming soon heated syringe assembly, asepsis style 2-hole, coiled, gray $30.00 For prices please see separate price list 70

72 tubing foot control tubing 2-hole, vinyl, per foot: hole, polyurethane, per foot: sterling gray black shadow $0.75 $0.75 $0.75 $ sterling gray black shadow $.25 $.25 $.25 $.25 foot control tubing 3-hole polyurethane, per foot gray $2.00 foot control tubing 4-hole, vinyl, per foot: sterling gray black shadow 4-hole, polyurethane, per foot: $.5 $.5 $.5 $ gray $.90 foot control tubing, asepsis style (polyurethane) 4-hole, per foot gray $2.50 For prices please see separate price list 7

73 tubing foot control tubing (polyurethane) 5-hole, polyurethane, per foot gray $2.75 interconnect tubing / 6 inside diameter, per foot: orange yellow black blue clear gray green red $0.25/ft. $0.25/ft. $0.25/ft. $0.25/ft. $0.25/ft. $0.25/ft. $0.25/ft. $0.25/ft. inside diameter, per foot: orange yellow black blue clear gray green red $0.50/ft. $0.50/ft. $0.50/ft. $0.50/ft. $0.50/ft. $0.50/ft. $0.50/ft. $0.50/ft. For prices please see separate price list 72

74 tubing smooth vacuum tubing Sold per foot. / 2 inside diameter: sterling gray black shadow $4.25 $4.25 $4.25 $ inside diameter: sterling gray black shadow $4.40 $4.40 $4.40 $4.40 / 2 hex inside diameter: sterling gray black shadow $3.25 $3.25 $3.25 $ hex inside diameter: sterling gray black shadow $4.00 $4.00 $4.00 $4.00 saliva ejector tubing (vinyl) 3 outside diameter sterling gray black shadow $0.80 $0.80 $0.80 $0.80 For prices please see separate price list 73

75 tubing spiral flex tubing Sold per foot. / 2 inside diameter, per foot: inside diameter: / 4 inside diameter inside diameter: sterling gray black shadow sterling gray black shadow sterling gray black shadow sterling gray black shadow $2.75 $2.75 $2.75 $2.75 $2.85 $2.85 $2.85 $2.85 $3.05 $3.05 $3.05 $3.05 $3.25 $3.25 $3.25 $3.25 / 4 inside diameter: / 2 inside diameter: / 4 inside diameter: sterling gray black shadow sterling gray black shadow sterling gray black shadow $3.75 $3.75 $3.75 $3.75 $4.25 $4.25 $4.25 $4.25 $5.25 $5.25 $5.25 $ inside diameter: gray $7.00 For prices please see separate price list 74

76 tubing braided tubing Sold per foot / 4 outside diameter, gray 5 / 6 outside diameter, gray 3 outside diameter, gray $.90 $3.00 $2.80 braided tubing bundle Braided fabric housing / 4 outside diameter inter connect () outside diameter interconnect (5) 24 awg low voltage wire (2) Per foot umbilical, gray $5.00 braided tubing bundle Braided fabric housing / 4 outside diameter interconnect () outside diameter interconnect (5) Per foot gray $5.00 braided tubing bundle Braided fabric housing outside diameter interconnect (8) Per foot gray $5.00 custom umbilical tubing Custom umbilicals built to your specifications. Contact factory for quotation. Note: See page 43 for umbilical cuffs. For prices please see separate price list 75

77 service items terminal and nuts For HP tubing. 3-hole borden s.s. nut with metal terminal s.s. nut with plastic metal terminal only plastic terminal only s.s. nut only $6.00 $6.00 $9.25 $9.25 $7.50 terminal and nuts For HP tubing. 4-hole midwest s.s. nut with metal terminal s.s. nut with plastic metal terminal only plastic terminal only s.s. nut only $6.00 $6.00 $9.25 $9.25 $7.50 autoclavable handpiece gasket (325 F) borden midwest, 4 hole $ borden, 2 / 3 hole $ midwest, 4 hole midwest, 5 hole $2.50 midwest 5 hole For prices please see separate price list 76

78 service items handpiece tubing terminal and nuts /3-hole HP to 4-hole HP connector $ hole HP to 2-hole HP connector $ hole HP to 3-hole HP connector $ sleeve installation tools Used for installation of tubing sleeve clamps standard sleeve tool standard / 4 sleeve tool $30.00 $30.00 service tool Adapts to 4-hole Midwest HP tubing to provide instant air source for cleaning of plugged tubings or testing of components. Nickel plated brass construction Universal barb fits or / 4 outside diameter tubing service tool $ replacement barb $ For prices please see separate price list 77

79 service items handpiece pressure gauge Used to adjust drive air pressure at HP. Connects to 6-pin, 5-hole and 4-hole HP tubing assembly 0-60 PSI gauge Nickel plated brass construction HP pressure gauge $95.00 test gauge Used for checking air or water pressures when troubleshooting PSI gauge Stepped barb, 0-32 x / 6 & test gauge $32.00 handpiece water coolant non-retraction gauge Used to determine if HP water coolant system meets standard for nonretraction water coolant non-retraction gauge $ o-ring lubricant Used as lubricant for o-rings o-ring lubricant, water resistant, 2 oz. $25.00 For prices please see separate price list 78

80 LOCTITE 242 threadlocker service items Used to lock, seat, and protect threads. Hardens in seconds, reaches full strength in 24 hours. Parts can be disassembled LOCTITE 242 threadlocker $7.00 forest allen wrench kit Includes each and holder:.05 / 6 5 / 64 3 / 32 7 / 64 9 / 64 5 / 32 3 / 6 7 / 32 / 4 5 / allen wrench kit $8.00 service kit image coming soon Contains 20 o-rings in 2 popular sizes from 7 / 64 outside diameter to / 2 outside diameter. part number description o-ring kit price $ autoclavable o-rings Viton for saliva ejector valve (#8 o-ring) (package 0) for central vacuum valve (#3 o-ring) (package 0) $4.50 $ For prices please see separate price list 79

81 service items o-ring kit refills Package 0. # # 2 # 3 # 4 # 5 # 6 # 7 # 8 # 9 # 0 # # # / 32 i.d. 3 / 32 o.d. #2 3 / 64 i.d. 9 / 64 o.d. #3 / 6 i.d. 3 / 6 o.d. #4 5 / 64 i.d. 3 / 64 o.d. #5 3 / 32 i.d. 7 / 32 o.d. #6 i.d. / 4 o.d. #7 5 / 32 i.d. 9 / 32 o.d. #8 3 / 6 i.d. 5 / 6 o.d. #9 7 / 32 i.d. / 32 o.d. #0 / 4 i.d. 3 o.d. # 5 / 6 i.d. 7 / 6 o.d. #2 3 i.d. / 2 o.d. #3 7 / 6 i.d. 9 / 6 o.d. $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 $2.50 barb fitting kit Contains eight different fittings. image coming soon way cross female, (package 5) 0-32 female connector (package 5) 0-32 male coupler (package 5) 0-32 x barbs and washers (package 0) 0-32 x / 6 barbs and washers (package 0) 0-32 hex plugs and washers (package 0) sleeve clamps (package 0) / 6 sleeve clamps (package 0) barb fitting kit $ water relay valve II kit Includes o-rings, spring, cover and cap repair kit, gray cap $2.50 For prices please see separate price list 80

82 service items field repair kit Contains 2 different repair kits FC drive air kit FC chip blower valve kit (aluminum cap) FC wet/dry toggle valve kit FC signal relay kit HP control, duo-black diaphragm ( each) HP control, tri-block ( each) Water relay valve kit Master shut-off kit HP control, quad-block diaphragm ( each) Flush cup kit 6-32 barb and washer kit 8-32 barb and washer kit field repair kit $40.00 master shut-off valve repair kit Includes o-rings and return spring master shut-off valve kit $7.00 automatic handpiece control block diaphragm only duo-block tri-block quad-block $3.25 $3.25 $7.25 water flush cup kit Includes valve stem, o-rings, spring and actuator ball water flush cup kit $9.00 For prices please see separate price list 8

83 service items foot control service kits (drive air valve kit) Includes plunger, poppet, o-rings and springs poppet with insert only complete kit $2.25 $3.50 chip blower valve kit Includes o-rings, keeper pin, spring and cap for valve with aluminum cap $25.00 wet/dry valve kit, toggle Includes plunger, o-rings and spring wet/dry kit, toggle $2.00 signal relay repair kit Includes plunger, o-rings, spring, cover and screws signal relay repair kit $8.00 For prices please see separate price list 82