Machine elements. Pneumatic stamping unit. Toggle-lever presses
|
|
- Brenda Rodgers
- 6 years ago
- Views:
Transcription
1 Machine elements Pneumatic stamping unit Toggle-lever presses
2 Machine elements ST 1292 ST 1092 Page 7.03 ST 9041 Page 7.04 ST 9061/62 Page 7.05 ST 9067 Page 7.05 ST 9070/72 Page 7.06 ST 9075 Page 7.07 ST 9122 ST 9124 ST 9126 ST 9120 Page
3 Pneumatic stamping units ST 1092, ST 1292 with special grey cast iron die sets Pneumatic stamping units consisting of die-sets with ball guide, traverse, threaded flange and pneumatic cylinder Application: Cutting, trimming, bending, riveting, flanged and assembly work ld3 d 1 h max t d 2 Description: The traverse will be clamped to the pillars above the die set upper part and used for the fixing of the pneumatic cylinder. The piston rod of the pneumatic cylinder is fixed onto the die set upper part with help from the threaded flange. e 1 Order example: Pneumatic stamping unit with die set made of special grey cast iron with round working surface ST 1092 D = 200 mm Addition 200 Order number ST b 1 a 1 Round working surface: Like ST 1002, however with longer guide pillars Rectangular working surface: Like ST 1202, however with longer guide pillars Order number ST Order number ST Working surface Pneumatic cylinder round Rectangular Compressive D a 1 x b 1 d 3 e 1 h max. t d 1 /d 2 x l*) Diameter Stroke force F at 6 bar G 3/8" /25 x N x G 3/8" /25 x N 125 x x G 3/8" /25 x N 125 x G 1/2" /32 x N x G 1/2" /32 x N 160 x G 1/2" /32 x N x G 1/2" /32 x N 200 x x G 1/2" /32 x N 200 x x G 1/2" /32 x N 200 x G 3/4" /40 x N x G 3/4" /40 x N 250 x 200 *) Denote deviations in pillar lengths in your order 7.03
4 Pneumatic stamping units ST 9041 pneumatic cylinder with flange DIN ISO 6431 l 1 l 2 l 3 Flange Note: When using cylinders without flange the next size is suitable for the traverse. Screw on from underneath! If required enlarge the length I of the guide pillars appropriately. Hydro-supported pneumatic cylinders upon request. Order example: Pneumatic cylinder with flange ST 9041 Cylinder diameter 80, stroke 50 mm Addition 080 x 050 Order number ST x 050 d 4 d 6 Order number ST Cylinder diameter Cylinder hub Compressive force F at 6 bar d 4 d 6 l 1 l 2 l N M 20 x 1.5 G 3/8" x N M 20 x 1.5 G 1/2" x N M 27 x 2 G 1/2" x N M 36 x 2 G 3/4" x (without flange) N M 36 x 2 G 3/4" x
5 Pneumatic stamping units ST 906. pneumatic cylinder with flange e 1 Traverses suitable for pneumatic stamping units with die sets made of special grey cast iron and for pneumatic cylinders ST 9041 d 1 d 8 d 7 a 4 a 3 d 2 b 4 The traverses are also deliverable without boreholes d 7 and d 8. Order example: Traverses suitable for pneumatic stamping units with die set made of special grey cast iron ST 9062 Space of the pillars e 1 = 184 mm Addition 184 Order number ST Traverse bored ST Threaded flange for pneumatic cylinder ST 9041 d 10 d 4 d 11 Order example: Threaded flange ST 9067 d 4 = M 20 x 1.5 Addition 20 Order number ST h 2 d 9 Threaded flange ST Threaded flange Traverse not bored without threaded flange Traverse bored without threaded flange Order number ST Order number ST Order number ST d 4 d 9 d 10 d 11 e 1 h 2 M 20 x M M 20 x M M 27 x 2 80 M M 36 x M a 3 b 3 d 1 d 2 h a 4 b 4 d 7 d M M M M
6 Pneumatic stamping units ST 9070, ST 9072 control unit and mounting table ELECTROPLATED ASSEMBLY PLATE B-449 * H-470 * T-2.5 MM (FROM HOUSING AE 1050) TUBE LENGTH TWO-HAND CONTROL BLOCK AIR FEED Pneumatic two-hand safety control consists of: Quick air-relief valve Pneumatic valve Two-hand control block Two-hand start Maintenance unit Manual sliding valve Pressure gauge with control lever valve Sound absorber Completely mount cylinder on assembly plate with accessory parts and connecting tubes. TWO-HAND START Discontinued product Order example: Pneumatic two-hand safety control ST 9070 Order number ST Mounting table as base for pneumatic stamping units Order example: Mounting table ST Order number ST
7 Pneumatic stamping units ST 9075 built up completely Pneumatic stamping units ready for work, with mounting table and two-hand safety control unit Application: Cutting, bending, trimming, riveting, flanged and assembly work If not specified otherwise, the stamping unit ST 1092 or ST1292 is mounted in the middle of the mounting table. As a standard there are 3 assembling possibilities. If you need another position of the stamping unit, please indicate so on your order. Order example: Pneumatic stamping unit built up completely ST 9075 Position to the operator side 02 Working surface a 1 x b 1 = 200 x 100 mm Addition x 100 Order number ST x 100 Discontinued product Operator side Operator side Operator side Order number ST Order number ST Order number ST Working surface round Working surface rectangular Pneumatic Pneumatic cylinder Compressive force F D a 1 x b 1 connection diameter Stroke at 6 bar 125 G 3/8" N x 80 G 3/8" N 125 x x 100 G 3/8" N 125 x G 1/2" N x 125 G 1/2" N 160 x G 1/2" N x 100 G 1/2" N 200 x x 125 G 1/2" N 200 x x 160 G 1/2" N 200 x G 3/4" N x 200 G 3/4" N 250 x
8 Toggle-lever presses ST 912. compressive force kn Punching Bending Perforating Folding Pressing in Stamping 2870 Press forming Embossing and many other possible uses Characteristics: High compressive force from 2500 up to N with only little force needed at the manual lever. Large ram stroke. The height of the whole toggle lever unit can be adjusted by a threaded spindle, adjustment with a setscrew. Work table with T-slot mounting for tool fixing. Clearance borehole in the middle of the table. Compact and stable design, little space required. Special technical features: The 360 adjustable manual lever allows most favourable lever position for any workflow. Technical data ST 9120 ST 9122 ST 9124 ST 9126 Compressive force approx. 1 mm before the bottom dead centre kn Overhang mm Ram stroke mm Pitch range of the toggle lever unit mm Smallest distance between table and ram mm (Stroke at the bottom, toggle lever unit at the bottom) Largest distance between table and ram mm (Stroke on top, toggle lever unit on top) Mounting surface at the ram mm 27 x x x x 65 Truing-up trunnion bore in the ram mm 10H7 10H7 10H7 15H7 Mounting surface table mm 150 x x x x 230 Centre borehole in the table (clearance borehole) mm Width of groove Height of the press mm Base space mm 150 x x x x 420 Space requirement incl. hand lever mm 150 x x x x 1150 Weight kp Convertible via a change of the bearing bolt. 12 kn max. stroke 25 mm 16 kn max. stroke 25 mm Order example: Toggle-lever press with 5 kn Compressive force Order number ST
9 Toggle-lever presses ST 912. drawing dimensions B V Y X1 T W C E F G D H I Z U R S X J L P M Q O N A D1 Dimensions ST 9120 ST 9122 ST 9124 ST 9126 kn A B C D D E F G H 100 I J K L M N O P Q Ø 7 Ø 9 Ø 9 Ø 9 R S T U V Ø 10H7 Ø 10H7 Ø 10H7 Ø 10H7 W X X Y Z
10
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses
Mechanical equipment Pneumatic stamping-unit Hand-toggle-lever presses Mechanical equipment ST 1092 ST 1292 page 7.03 ST 9041 page 7.04 ST 9062 page 7.05 ST 9067 page 7.05 ST 9072 page 7.06 ST 9075 page
More informationMulti-Force Cylinder
Multi-Force Cylinder Air Press Pneumatic Cylinder with Mechanical Power Transmission When extremely high forces are required, the limits of pneumatic cylinders are quickly reached. However most applications
More informationManual clamps Industrial standard
Manual clamps Industrial standard Modular clamps The modular clamp kit. In connection with a standard ISO cylinder and a clamp bracket, fully equipped pneumatic clamping points can be assembled with the
More informationGeneral Catalogue. Manual presses Pneumatic presses Hydropneumatic presses
General Catalogue Manual presses Pneumatic presses Hydropneumatic presses Contents mäder, the company 3 Press workstations 4 Special designs 5 Manual presses Accessories for manual presses 7 mäder presses,
More informationMaximum force range from 15 kn to 220 kn
SCHMIDT HydroPneumaticPress Maximum force range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationProfile rollers PEVOLON PEVOLASTIC
Profile rollers 148 Profile rollers product overview Profile rollers FLANGED/GROOVED WHEELS We produce a variety of flanged and grooved wheels with different dimensions, bearing types and load capacities
More informationALFRA PRESS - overview
70 ALFRA PRESS 71 ALFRA PRESS - overview ALFRA PRESS AP 250 ALFRA PRESS AP 400 Page 74 Page 78 Control cabinet housing, Control cabinet doors, Mounting panels Control cabinet housing, Control cabinet doors,
More informationAIRCRAFT FINISHING Assembling the Front Seat Frames
AIRCRAFT FINISHING Assembling the Front Seat Frames Front Seat (shown with custom leather upholstery) The front seat frame assembly is supplied without upholstery. The seat back is hinged at the bottom
More informationFlexi Press H-Model, Standard
Flexi Press H-Model, Standard The modern workshop press FlexiPress is our strong and reliable workshop press for all requests. All models are delivered with a generous workspace and a double-acting cylinder.
More informationGROUPCODE NEN : ANSI : STEEL BS : STEEL
RETAINING RINGS FOR BORES - NORMAL TYPE - ➁ DIN : 4 8 8 9 10 11 1 13 14 15 s 0,8 0,8 1 1 1 1 1 1 ring d3 8, 9,8 10,8 11,8 13 14,1 15,1 16, d4 3 3, 3,3 4,1 4,9 5,4 6,, d 8,4 9,4 10,4 11,4 1,5 13,6 14,6
More informationLVE - with integrated pneumatic cylinder
LVE - with integrated pneumatic cylinder APPLICATION Optimally suited for flange, bar and tube machining, especially for machines without a clamping cylinder. TYPE Power chuck with integrated pneumatic
More informationJacks & Lifting Equipment
Jacks & Lifting Equipment Bottle Jacks Stable and rigid jacks developed for the professional user. Equipped with a security valve to prevent overloading. The 3 and 5 ton models are supplied with a handy
More informationSteel / Cast iron body Independent chucks
Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design
More informationSCHMIDT HydroPneumaticPress
Maximum orce Range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within the pressing force range 1 220
More informationHydraulic Ram Control Unit HSE NG 10
Hydraulic Ram Control Unit HSE NG 0 Design and Function Common features of VTHL ram control units: modular design robust valve elements high dynamics simple control structure The integration of all necessary
More informationHandwheels, handles, position indicators
Handwheels, handles, position indicators 217 218 Product overview Handwheels, handles, position indicators Grey cast iron handwheels DIN 950 K0671 Handwheels with cylindrical fold-away grip K0258 Aluminium
More informationCLAMP AND FLANGE COUPLINGS
POWER TRANSMISSION RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS 2 CLAMP AND FLANGE COUPLINGS RIGID COUPLINGS CLAMP AND FLANGE COUPLINGS FLANGE COUPLINGS DIN 116 Flange couplings are torsionally stiff, particularly
More informationPerformance requires quality.
131 - With straight shank and square - Left-hand spiral 7-8 - First cut 1/4 of the cutting length (l 2 ) - Accuracy Hand Reamers DIN 26. Not suitable for blind holes. d 1 l 2 l 1 d 2 131 2, 25 5 1,6 21
More informationDie changing technique
Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers
More informationPNEUMATIC PRESSES. pneumatic presses DESCRIPTION FEATURES AND OPTIONS
3 DESCRIPTION Air-Mite has been manufacturing since 1952. We are continuously improving the durable, time-tested design of our presses PRESS SELECTION that they exert. From the smallest DPS4 model, which
More informationPROVEN CHUCK WITH SPIRAL RING
PROVEN CHUCK WITH SPIRAL RING The RÖHM geared scroll chucks have already been in use for decades and have proven themselves a thousand times over. The jaws can be quickly adjusted over the entire clamping
More informationPNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel
PNEUMATIC VERTICAL AND PUSH-PULL CLAMPS Features and Specifications: Vertical models V75X, V150X, V250X and V450X are of zinc plated pressed steel construction and have compact cylinders without tie-rods.
More information+91-8048601865 National Pneumatic Systems http://www.hydropneumaticpresses.com/ We are the manufacturer and supplier of hydro pneumatic presses & cylinder. These pneumatic systems find extensive application
More informationBridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since
Bridco are the main Australian agents for *Talurit A.B, a world renowned company specialising in mechanical splicing systems based in Sweden since 1948. 49 Rev. 2010-04-14 Economically priced Robust design
More informationPneumatic toggle presses
The accessories Pneumatic toggle presses P*L and VL range The optimum transmission ratio of the toggle lever produces large forces at the end of the stroke and ensures low air consumption. The resulting
More information:46 Pagina 69 Bending
Bending Bending Lever Benders Lever Benders 300 Series Plumbing Benders Designed to bend soft copper tubing to a maximum of 180. Offset cushion grip handles eliminate knuckle cracking. Cat. Model Capacity
More informationDouble-acting, magnetic, guided ø 10x2, 16x2, 20x2, 25x2, 32x2 mm
CATALOGUE > Release 8.8 > Series QX twin rod cylinders Series QX twin cylinders Double-acting, magnetic, guided ø 0x2, 6x2, 20x2, 25x2, 32x2 mm High force Precise movement Integrated guide QXB: linear
More informationEconomy - ZGF. Two-jaw lathe chucks. Two-jaw lathe chucks ZGF. Suitable for use on ground and basic plates.
Economy - ZGF Two-jaw lathe chucks Suitable for use on ground and basic plates. Technical features: - with scroll - unstepped soft top jaw - cast iron body - DIN 6350 - DIN 6350 - lathe chucks must be
More informationSCHMIDT Toggle Presses
SCHMIDT Toggle Presses The high force at the end of stroke, just where it is important Do you need a high force at the end of stroke for materialtransforming processes? Then, SCHMIDT Toggle Presses are
More informationAccessories for screw jacks type SGT
Product description Accessories for Albert SGT screw jacks Both trapezoidal and ball screw version The comprehensive range of Albert accessories for screw jacks provides the designer with the means to
More informationProduct overview. Joints. Circlips for ball seats DIN K0714. Quick plug couplings with radial offset compensation K0709. Page 837.
Joints 825 Product overview Joints Quick plug couplings with radial offset compensation K0709 Quick plug couplings with radial offset compensation and screw-on flange K0710 Quick plug couplings with angular
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationGuide units. For toolmaking, fixture manufacturing and machine engineering
Guide units For toolmaking, fixture manufacturing and machine engineering Guide units in compliance with DIN, ISO and STEINEL standards or according to your specifications Guide pillars Guide and pillar
More informationSCHMIDT HydroPneumaticPress
SCHMIDT HydroPneumaticPress C-rame design eatures The C-rame design offers full accessibility when manually inserting and removing parts Easy adaptation to different tool and part heights because of simplistic
More informationSCHMIDT PneumaticPress Direct Acting pneumatic presses with force/stroke monitoring
Direct Acting pneumatic presses with force/stroke monitoring 32 323 327 329 SCHMIDT PneumaticPress with force/stroke monitoring are offered as complete system with control unit SCHMIDT PressControl 3.
More informationGeared scroll chuck with optimized design
Geared scroll chucks Geared scroll chuck with optimized design Benefit from proven quality in optimized design. A splash water edge at the upper chuck edge is used as additional protection of the spindle
More informationProfile series I-40. System kit Profile series I-40
Profile series I-40 System kit Profile series I-40 n n n a n n n R n a R 45 Profile series I-40 Contents 1 Technical data/profile machining F f Page 1 2 Page 1 3 Page 1 5 Page 1 8 Profiles Page 2 2 3000
More informationClamping systems Forming technology. Quality clamps quality
Clamping systems Forming technology Quality clamps quality Success through innovation since 1918 2 Clamping systems for forming presses reliable, simple, convenient 1. Manually movable clamping systems.......
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationPRODUCT CATALOGUE
PRODUCT CATALOGUE 2008 www.scorpionjacks.com.au Heavy duty, all welded, steel chassis forms the backbone of these incredibly rugged jacks. All air lines are totally protected within the boxed steel handle.
More informationHydraulic Clamping Systems
Hydraulic Clamping Systems Hydraulic screw-in cylinder, single action Operating pressure max. 350 bar / min 100 bar These hydraulic crew-in cylinder are single acting and with spring retraction. They can
More informationFurness Railway Wagon Co. NBR/LNER 8ton 3PLK General Merchandise Wagon
Furness Railway Wagon Co. General Merchandise Wagon Wheels, paint and transfers required to complete. Please note that to aid the folding of the various parts score all the halfetched foldlines that are
More information.com More than a machine. Power your life
Mechanical Clamp, Precise working Solid Radial Drilling Machines ideal for Versatile use in the Single Part and Series Production This kind of MM-R40V is the Mechanical Clamp 40mm Solid Radial Drilling
More informationJET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
More informationVBK 2596/12E/RSF. Thickness and Width Gauge for Strip and Profile. Operating- & Service Instructions. (with lateral guide rollers)
Thickness and Width Gauge for Strip and Profile (with lateral guide rollers) VBK 2596/12E/RSF Operating- & Service Instructions erstellt am 5.2.1998 freigegeben am Bemerkungen Rev.01 Seiten:16 Name: Rietdorf
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationSCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs.
SCHMIDT ManualPress From 1.6 kn to 22 kn / 360 lbs. to 4,945 lbs. Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual
More informationCASTORS & WHEELS WDS SECTION 20 - CASTORS & WHEELS. Levelling Castors. Furniture Castors. Stainless Steel & Zinc Plated Brackets.
CASTORS & WHEELS Furniture Castors Nylon Castors Rubber Castors High Temperature Phenlic Resin Castors Stainless Steel & Zinc Plated Brackets Heavy Duty Castors Light Duty Castors Levelling Castors Individual
More informationBASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS POWER PRESSES AND KNUCKLE JOINT PRESSES.
7-721, Basant Road, Industrial Area-B, Ludhiana - 13 (INDIA) 91-97802-00007, 9315-11111 info@basantgroup.com www.basantgroup.com BASANT MECHANICAL WORKS (REGD.) MANUFACTURERS & EXPORTERS OF HIGH CLASS
More information/2017. Swing sink clamping element double-acting
Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INIVIUALLY AJUSTAL The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072 INPNNT
More informationHydraulic Ram Control Unit HSE NG 6
Hydraulic Ram Control Unit HSE NG 6 Design and Function forms the basis for the stroke control. Common features of VTHL ram control units: Tdc (top dead center) control is always with mechanical closed
More informationMachine nozzle with needle shut-off type HP pneumatically or hydraulically controlled. Needle shut-off
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Needle shut-off Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated
More informationRoll Grooving ROLL GROOVING. Pipe Capacity. No. of Models. Type. Page
Roll Grooving Designed to improve speed and efficiency for fire sprinkler and other industrial installations. Wide selection of mechanical and hydraulic units for applications up to 24" in diameter. Type
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationPneumatic Axial Die Grinder also for Underwater Use Type , 0050
M a s c h i n e n f a b r i k G m b H Pneumatic Axial Die Grinder also for Underwater Use Type 1 5077 0010 0020, 0050 Illustration can differ from the original Repair Manual and Compiled: 18.07.11 150770010_0020_0050_Inst_en_Version_00
More informationCOMPACT HYDRAULIC PUNCHER
INSTRUCTION MANUAL COMPACT HYDRAULIC PUNCHER Art. 21 67 50 DIN EN ISO 9001 QZERTIFIKAT...convincing solutions 1. TECHNICAL CHARACTERISTICS Maximum cutting capacity: Ø 60 mm. 3 mm thick steel plate 46 x
More informationStirrup-shaped handles, machine handles, apparatus handles
Stirrup-shaped handles, machine handles, apparatus handles 231 K0186 Stirrup-shaped handles GJS 400 Deburred and tumble cleaned; black plastic coated; machined contact faces. KIPP Stirrup-shaped handles
More informationGTK 80. Technical data
Industrial square suspension system with open cable duct for heavy loads Modular construction with free accessible cable duct Floor, top-mounting or wall exit options Technical data Material: connecting
More informationStandard Parts for Mould Making
Standard Parts for Mould Making Index Your Production Partner 4-5 Guide Elements Locating units, round 8 Locating units, flat 8 Compensation Discs 9 Adjusting washers 9 Ejector rods 10 Centering sleeves
More informationSecure footing. Easy levelling. Blickle levelling castors with integrated truck lock
Secure footing. Easy levelling. Blickle levelling castors with integrated truck lock www.blickle.com 2 we innovate mobility www.blickle.com Blickle levelling castors Sturdy in use. Easy to use. The right
More informationSelection Tool. on the Internet at in the section MÄDLER -Tools. Other sizes and designs on request. Connecting Shafts Page 766
Couplings Overview Friction Clutches Friction Clutches Type B Axial Arrangement Friction Clutches Type C Transversal Flexibility Sliding Hubs with Torsionally-Flexible Coupling Multi-Disk Friction Clutches
More informationFOR EVERY APPLICATION
FOR EVERY APPLICATION In order to be able to satisfy every application, RÖHM has hydraulically, pneumatically as well as electrically actuated cylinders without through-hole in their product range. hydraulical
More informationStandard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches
8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud
More informationWPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use
Hydraulic shop presses WPP 15 T - Hydraulic table shop press with manual pump and mobile cylinder for professional use For all repair and assembly works, e.g.: Straightening Robust frame with perforation
More informationJAWS INDIVIDUALLY ADJUSTABLE
JAWS INDIVIDUALLY ADJUSTABLE The four jaws can be independently adjusted via the threaded spindle, thereby allowing the safe and secure clamping of irregular, regular, as well as round workpieces. 3072
More informationSCHMIDT ManualPress. From 1.6 kn to 22 kn
SCHMIDT ManualPress From 1.6 kn to 22 kn Efficient manufacturing requires appropriate means of production not always automation. In particular, with small production runs, manual presses are often the
More informationPNEUMATIC GLOBE VALVE
S & FLAP VALVES TYPE 12:1 Figure 1 Figure 2 ALLY-OPERATED STRAIGHT AND ANGLE VALVES (TYPE PV) Figure 1 depicts the construction of a straight valve with the disc fixed to the spindle. The construction
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationSCHMIDT PneumaticPress
Maximum Pressing orce from 1.6 to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationTOX -Powerpackage: The complete drive family for pressforces from kn
T -owerpackage: The complete drive family for pressforces from 2-2000 k The T -owerpackage is available with different pressforces, strokes and structural shapes. election criterions: 1) ressforce required
More informationActuator LA23 DESKLINE. Data sheet LINAK.COM/DESKLINE
Actuator LA23 DESKLINE Data sheet LINAK.COM/DESKLINE LA23 DESKLINE The LA23 is a small and strong push actuator (up to 2500 N). The LA23 can be used in various applications where size is important. The
More informationSCHMIDT ManualPress 300 Series
Manual Presses with Process Monitoring Process reliability, force/stroke monitoring of the joining process and EN ISO-compatible documentation of the results are becoming the major factors for small and
More informationShaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings
Shaft Couplings Flange-Couplings Rigid Shaft Couplings Flexible Couplings 44 Edition 2013/2014 RINGSPANN Registered Trademark of RINGSPANN GmbH, Bad Homburg 2 Table of Contents Flange-Couplings Page Flange-Couplings
More informationYear of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number X mm / Y mm / Z mm C - +/- 220 / B - +/- 110
EiMa GAMMA T LINEAR 5 axes portal machining center In excellent conditions Manufacturer Model EiMa GAMMA T LINEAR Year of manufacture 2007 Control HEIDENHAIN itnc 530 Machine number 11615 Travels X 3.700
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationCAPTIS. The modular and flexible system for internal and external clamping
NEW CAPTIS Clamping system The modular and flexible system for internal and external clamping CAPTIS Clamping SYSTEM The new, modularly designed CAPTIS clamping system is very impressive with its high
More informationGeared scroll chucks with independently adjustable jaws
Geared scroll chucks with independently adjustable jaws ES This chuck is used for aligning irregularly shaped workpieces. Geared scroll chucks Principle of operation Through a radially arranged drive (1,
More informationRichter Sampling Valves
Richter Sampling Valves PA/F, PA/S Body ductile iron with PFA lining or investment cast stainless steel Bellows-sealed Safety packing gland Representative sampling Richter sampling valves Fields of application
More informationcompact magnetic cylinders
CATALOGUE > Release 8.7 > Series 32 cylinders Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»»
More informationAIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
More informationPNEUMATIC TOGGLE PRESSES
ELECTROPNEUMATICS -an innovative engineering organisation was established in 1972 and began their operations with the manufacture of a comprehensive range of pneumatic control valves, which were soon widely
More informationRichter Sampling Valves
Richter Sampling Valves PA/F, PA/S Body ductile iron with PFA lining or investment cast stainless steel Bellows-sealed Safety packing gland Representative sampling Richter sampling valves Fields of application
More informationHot Tapping Products
Hot Tapping Products HMT Series Hot Tapping Machines The Hydratight MHT range is designed for ease of use in making 3 60 inch (76 1524mm) taps into various material pipelines and tanks with the ability
More informationSCHMIDT PneumaticPress
PneumaticPress Direct Acting Pneumatic Presses with Force / Stroke Monitoring PneumaticPresses with force / stroke monitoring are offered as complete system with control unit Press- Control 600. These
More informationMachine nozzle with needle shut-off type HP pneumatically or hydraulically controlled
Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator
More informationSide Entry Trunnion Mounted. Ball Valves. Floating
Side Entry Design: 2 or 3 pieces (Bolted Body or Fully Welded) Size/Class: - ANSI/ASME classes from 150 to 4500 - Sizes from ½ to 56 according to API 6D - API classes from 3000 to 15000 - Sizes up to 11
More informationBELL, SCOTT & CO. LTD.
Twist drills DIN 338 type N HSS Co 5 ground, with split point BELL, SCOTT & CO. LTD. Special drills consisting of cobalt alloyed heavy duty high-speed steel with higher heat-resistance. Ideally suitable
More informationRoller chain idler sprocket units Idler pulley units
Roller chain idler sprocket units Idler pulley units Roller chain idler sprocket units, idler pulley units Page Product overview Roller chain idler sprocket units, idler pulley units... 334 Design and
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
SITEMA PowerStroke FS ocking, actuating and releasing by hydraulic pressure English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS TI-P11-EN-01/016
More informationTA1. series. Comfort Motion Care Motion Auto Motion Ergo Motion. Product Segments
Product Segments Comfort Motion Care Motion Auto Motion Ergo Motion The TA1 linear actuator is TiMOTION s flagship model suited for healthcare, furniture, ergonomic and industrial applications. Industry
More informationSCHMIDT PneumaticPress
Maximum pressing force from 1.6 kn to 60 kn The SCHMIDT PneumaticPress range consists of a modular system suitable for transforming, joining and assembling operations optimally within the pressing capacities
More informationAssembly Products. View Assembly Products at: LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION
Assembly Products LINEAR ACTUATORS AND MODULAR UNITS FOR YOUR APPLICATION View Assembly Products at: www.clrh.com (636) 386-8022 www.clrh.com Drive, Assembly and Handling Technology Linear Actuators n
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationBIG DEAL. cylinders are still a. compact air. inside: Digital Ebook A Design World Resource. Compact Air Cylinders: 101
compact air cylinders are still a BIG DEAL inside: 2 Compact Air Cylinders: 101 5 9 Enormous range of options Applications 10 Custom Compact Air Cylinders And more! Digital Ebook A Design World Resource
More information