Table of Contents FE Series Features and Benefits
|
|
- Edwin Pearson
- 6 years ago
- Views:
Transcription
1
2 Table of Contents FE Series Features and Benefits How To Order Dimensions and Technical Specifications Switch Information Numatics 2006 Rev. 1/06 2
3 The FE Series design uses two double acting cylinders that are cross-ported and internally sequenced for smooth functioning parts regulation. Internal back pressure cross-port design allows both rods to be retracted with the air off to easily clear jammed parts. A four way two position valve is required for operation. A. Body High strength hardcoat aluminum. B. Rods Ground aluminum, hardcoat anodized, Teflon impregnated nonrotating. C. Retract Stop Adjustments Two adjustment screws allow flexibility to adjust the retract stroke on both rods independently. D. Bronze Bushings High side load capabilities, self lubricating, long life. E. Sensing Hall effect sensors available to sense extend & retract positions. How to Order Stroke 12 = 1.25 Sensing Type Standard Cord Set 1 = Hall Switch - PNP (sourcing) 2 = Hall Switch - NPN (sinking) 6 = No Sensing Quick Disconnect Cord Set Z = Hall Switch - PNP (sourcing) Straight Y = Hall Switch - NPN (sinking) Straight See page 5. When ordering additional switches: FE 12 1 A 1 1 X C E Special Options X = No Options Sensing Position 1 = Single Postion Left Side 2 = Single Position Right Side 5 = Two Position Left and Right Side 6 = No Sensing Sensing Position A = Extend B = Retract C = Extend and Retract D = No Sencing SWITCH STANDARD QUICK DISCONNECT DESCRIPTION PART NO. PART NO. Hall Effect PNP (Sourcing) CS-20TP CS-20TP-QD A B D Hall Effect NPN (Sinking) CS-20TN CS-20TN-QD Reed Switch CS-20TR CS-20TR-QD
4 FE Series Dimensions and Technical Specifications Specifications AIR PORTS TAPPED # DOWEL HOLES X 1/" DEEP (2) PLACES (Opposite Side) DRILLED & C'BORED FOR #10-2 SCREW THIS SIDE TAPPED 1/"-20 OPPOSITE SIDE SENSOR SLOT FE-12 Stroke 1.25 in. Force 100 psi.0 lbs. Force 100 psi 1.0 lbs. Time 0.5 Sec. Pressure Range psi Side Play +/ in. Displacement 0.8 cu. in. Weight 12.0 oz. LOAD CAPACITY STATIC DYNAMIC Mx in.-lbs. My in.-lbs. Mz in.-lbs..75 MY TAPPED #10-2 THRU (2) PLACES MX MZ
5 FE Series Switch Information SWITCH OR BRACKET DESCRIPTION STANDARD PART NO. QUICK DISCONNECT PART NO, 1 Hall Effect PNP (Sourcing) mm CS-20TP CS-20TP-QD 1 Hall Effect NPN (Sinking) mm CS-20TN CS-20TN-QD 1 Reed Switch mm CS-20TR CS-20TR-QD Reed Switch (AC/DC NO) 8 mm Connector - CS-20TR-QD Reed Switch SPST 5-120V DC/AC 50/60 Hz (Resistive) 6 Watts 2.5V 200 Hz 0G/9G None Set Screw Max. Torque Electro Switch (PNP NO) 8 mm Connector - CS-20TP-QD BROWN (+) NOT USED BLUE (-) 1 BROWN (+) NOT USED BLUE (-) Solid State PNP Current Spurcing 5-0 VDC ma max VDC max. Green Cable Magnetic Requirement 0 Gauss parallel 1 to 158 F (-10 to 70 C) Reed Switch (AC/DC NO) Flying Lead - CS-20TR DETECT ING POINT Reed Switch SPST 5-120V DC/AC 50/60 Hz (Resistive) 6 Watts 2.5 max. 200 Hz 0G/9G None Set Screw Max. Torque Electro Switch (NPN NO) 8 mm Connector - CS-20TN-QD BRN BLU LOAD + POWER 1 BROWN (+) NOT USED BLUE (-) Solid State NPN Current Spurcing 5-0 VDC ma max VDC max. Cable Magnetic Requirement 0 Gauss parallel 1 to 158 F (-10 to 70 C) _ 5
6 Electro Switch (NPN NO) Flying Lead - CS-20TN Electro Switch (PNP NO) Flying Lead - CS-20TP DETECT ING POINT BRN + BLK LOA D POWER Solid State NPN Current Spurcing 5-0 VDC ma max VDC max. Cable Magnetic Requirement 0 Gauss parallel 1 to 158 F (-10 to 70 C) MAIN CIRCUIT BLU _ DETECT ING POINT BLK POWER BLU LOAD _ Solid State PNP Current Spurcing 5-0 VDC ma max VDC max. Green Cable Abrasion resistant polyurethane (PUR) jacket, PVC insulation Magnetic Requirement 0 Gauss parallel 1 to 158 F (-10 to 70 C) Female Connectors for Reed Switches and Hall Effect Sensors Straight Type Dimensions (mm) TYPE ORDER CODE Straight, 5 m Cable PXCST Elbow, 5 m Calbe PXC90 MAIN CIRCUIT BRN Elbow Type + 6
7 World Headquarters Numatics Incorporated Phone: Fax: UNITED STATES Numatics Air Preparation Phone: Fax: Numatics Valves Phone: Fax: Numatics Miniature Valves Phone: Fax: Numatics Cylinders Phone: Fax: Numatics Rodless Cylinders Phone: Fax: Numatics Automation Phone: Fax: CANADA Ontario Numatics, Ltd. Phone: Fax: Quebec Numatics, Ltd. Phone: Fax: British Columbia Numatics, Ltd. Phone: Fax: EUROPE Germany European Headquarters Numatics GmbH Phone: Fax: Hungary Numatics Kft. Phone: Fax: EUROPE England Numatics Limited Phone: Fax: France Numatics s.a.r.l. Phone: Fax: Italy Numatics srl Phone: Fax: Netherlands Numatics B.V. Phone: Fax: Spain Numatics Spain S.L. Phone: Fax: AFRICA South Africa Numatics SA (Pty) Ltd. Phone: Fax: LATIN & SOUTH AMERICA Mexico Numatics de Mexico S.A. de C.V. Phone: Fax: Brazil Valvair Comercial Ltda. Phone: Fax: ASIA & PACIFIC Australia Numatics Australia Pty. Ltd. Phone: Fax: Taiwan Asian Headquarters Numatics Co, Ltd. Asia Phone: Fax: For a comprehensive listing of all Numatics production and distribution facilities worldwide, visit PDF-FESERIES-006
Table of Contents PBS Series Features and Benefits
Table of Contents PBS Series........................................... 3-6 Features and Benefits..................................................................................3 How To Order........................................................................................4
More informationTable of Contents BDU Series Features and Benefits
Table of Contents BDU Series.............................................. 3-13 Features and Benefits..................................................................................3 How to Order.........................................................................................4
More informationS Series Technical Data...7 How to Order...8 Dimensions...8 Manifold Dimensions and Part Numbers...9
Miniature Valve Series............................................................3-14 RB Series..................................................................................3-6 Technical Data...................................................................................3
More informationTable of Contents Tiny Titan Series Features and Benefits How to Order Optional Features
Table of Contents Tiny Titan Series. 3-22 Features and Benefits.................. 3 How to Order......................... 4 Optional Features..................... 5 Basic and Front Flange Mounts..........
More informationWG Series Double Guided Wedge Grippers
WG Series Grippers www.numatics.com Table of Contents WG Series Parallel Gripper Features & Benefits 3 How To Order 4 WGS50 Dimensions 5 WGS50 Technical Specifications 5 WGL50 & WGS90 Dimensions 6 WGL50
More informationWBG Series Wide Body Grippers
WBG Series Wide Body Grippers www.numatics.com Table of Contents WBG Series Parallel Grippers Features and Benefits 3 How To Order 3 WBGS 60 Dimensions & Technical 4 WBGS 90 Dimensions & Technical 5 WBGL
More informationToday Numatics is proud to be a part of the Industrial Automation Division of Emerson Electric Co.
Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components, have made a significant
More informationFeatures and Benefits
......................................................3-18 Features and Benefits..............................................................................3 Precision Regulator.............................................................................4--5
More informationNumatics 2003 Rev. 11/03 PDFPRECISION-1
......................................................3-18 Features and Benefits..............................................................................3 Precision Regulator.............................................................................4--5
More informationPBS Series Power Block Slide
PBS Series Power Block Slide www.numatics.com Table of Contents PBS Series Features and Benefits 3 How To Order 4 Technical Specifications 4 Dimensions 5 Quick Disconnect Cables 6 Switch Information 6-7
More informationNote: Rod jam nut included with cylinder.
Unique dual switch groove (CombiGroove ) designed to accept most T slot type switches as well as half-moon switches Brass female hexagon adjustment screw for end-of-stroke cushion Precise cushion adjustment
More informationAG Series Angular Grippers
AG Series Angular Grippers www.numatics.com Table of Contents AG Series Angular Grippers Features and Benefits 3 How to Order 4 Dimensions 5 Specifications and Load Ratings 6 Sensing Part Numbers 7 Quick
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationTable of Contents. SH Series Linear Slides
Table of Contents SH Series...3-17 Features and Benefits... 3 How To Order... 4 Dimensions...5-7 Specifications and Load Ratings....8-10 Mounting Options... 11 NuMate Mounting System.... 12 Multi-Position
More informationTable of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
More informationISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m
ISO/VDMA Series ISO 6431 and VDMA 24562 Line Cylinder Line ISO 6431 andcylinder VDMA 24562 w w w. n u m a t i c s. c o m Table of Contents ISO/VDMA Series Features and Benefits 3 How to Order 4 Technical
More informationISO/VDMA Series ISO 6431 and VDMA Cylinder Line
ISO/VDMA Series ISO 6431 and VDMA 24562 Cylinder Line www.asco.com Table of Contents ISO/VDMA Series Features and Benefits 2 How to Order 3 Technical Information 4 Dimensions Tie-Rod Version 5 Mounting
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationClimax Pneumatics. ISO 6432 Interchangeable Cylinders Easley, South Carolina
Climax Pneumatics ISO 6432 Interchangeable Cylinders 1-800-732-8704 Easley, South Carolina End Caps Anodized Aluminum Tube Stainless Steel AISI 304 Piston Seals Rod Bushing Brass ø 8-10 - 12 Polyurethane
More informationEQ Series OEM Aluminum NFPA Interchangeable Cylinder Line
Series OEM Aluminum NFPA Interchangeable Cylinder Line www.numatics.com Table of Contents EQ Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Rod Ends 6 Dimensions 7 How to Order - EQ Series
More informationGuided Slides and Guided Rods
Guided Slides and Guided Rods Guided Slides & Guided Rods: Table of Contents Guided Slides & Guided Rods Guided Slides Product Features...pg 2 Quick Reference...pg 2 How to Order...pg 3 Dimensional Data...pg
More informationTable of Contents R Series Features and Benefits
Table of Contents R Series..................................................................................... -8 Features and Benefits..................................................................................
More informationAir-Oil Systems, Inc.
Table of Contents R Series..................................................................................... -8 Features and Benefits..................................................................................
More informationFeatures and Benefits
...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationE Series Economic Tie-Rod Cylinder Line
Series Economic Tie-Rod Cylinder Line www.numatics.com Table of Contents E Series Features and Benefits 3 How to Order 4 Basic E-Series Cylinders 5 Cushioned Cylinders 5 Basic E-Series Dimensions 5 E-Series
More informationE Series Economic Tie-Rod Cylinder Line
E Series Economic Tie-Rod Cylinder Line w w w. n u m a t i c s. c o m Table of Contents E Series Features and Benefits 3 How to Order 4 Basic E-Series Cylinders 5 Cushioned Cylinders 5 Basic E-Series Dimensions
More informationINTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationClimax Pneumatics Cnomo NFE Cylinders
Climax Pneumatics Cnomo NFE 49001 Cylinders End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane Chromium Coated Steel Working Pressure
More informationClimax Pneumatics. Cnomo NFE Cylinders Easley, South Carolina
Climax Pneumatics Cnomo NFE 49001 Cylinders 1-800-732-8704 Easley, South Carolina End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane
More informationISO Interface. Large capacity. Light weight. Accommodates enclosure IP65. Solenoid Valve (with M Connector) Conforming to ISO
P-EX01-A Solenoid Valve (with M Connector) Conforming to ISO 1507-1, Large capacity EVS1-01 (Size: 01) EVS1-0 (Size: 0) Light weight Size 01 (-position): 0.6kg Size 0 (-position): 0.18kg Flow rate 1000L/min
More informationSingle-acting pneumatic cylinder type ECS
Single-acting pneumatic cylinder type ECS Information is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-18 issue: 2 Single-acting pneumatic cylinder
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationKnife gate valve JTV. Data is only for informational purpose. All specifications are subject to change without notice issue 11
Knife gate valve JTV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-05-21 issue 11 Knife gate valve JTV Stafsjö s knife gate valve JTV is reliable
More information300 & 400 Series Positioning Tables
300 & 400 Series Positioning Tables 300 Series Introduction L-2 400 Series Introduction L-3 Specifications L-5 300 Series Dimensions L-6 400 Series Dimensions L-7 300 Series Motor Couplings L-8 300 Series
More informationExtruded Thrusters. Brochure
Extruded Thrusters Brochure Chrome plated stainless steel guide shafts optimize bearing performance Mounting flexibility: Through & C-bore Tapped bottom Tapped rear Bottom T-slots Bronze bushing for heavy
More informationMulti-Act Integrated Motion Controller
Multi-Act Integrated Motion Controller Multi-Act Overview FEATURES 3 Multi-Act Dimensional Information DESCRIPTION Multi-Act s Integrated Motion Actuators have an output shaft which produces both linear
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationParallel Grippers- DPW DIRECTCONNECT Wide Body Series
DPW SERIES 1.196 Parallel Grippers- DPW DIRECTCONNECT Wide Body Series DIRECTCONNECT Connectivity: DIRECTCONNECT Tapped and Dowel mounting on body. Large or Wide Parts: Wide body design provides secure
More informationEQ Series OEM Aluminum NFPA Interchangeable Cylinder Line
EQ Series OEM Aluminum NFPA Interchangeable Cylinder Line w w w. n u m a t i c s. c o m Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More informationBrochure. Compact Cylinders. Setting a new standard for: Quality Reliability Value Global Compatibility
Brochure Compact Cylinders Setting a new standard for: Quality Reliability Value Global Compatibility Actuators - Compact Cylinders How to Order MODEL MACQ - Compact Cylinder MAGNET Blank - No Magnet S
More informationKnife gate valve TV. Data is only for informational purpose. All specifications are subject to change without notice issue 9
Knife gate valve TV Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-08 issue 9 Knife gate valve TV Stafsjö s knife gate valve TV can be used an
More informationYou ll find many Tsubaki products being
You ll find many Tsubaki products being There are many processes involved in making a motor vehicle. You ll find Tsubaki products in all of these processes, from conveying vehicle bodies from the stockyard,
More informationGrippers Parallel grippers
-finger parallel grippers -finger parallel grippers Product notes > Gripper with high gripping force > Double-acting for inside/outside gripping and short duty cycles > Single-acting: normally open (NO),
More informationPVV Open Loop Pumps. Bulletin D
PVV Open Loop Pumps Bulletin 47028-D Table of Contents Table of Contents Performance Assurance page 3 Features and Benefits 4-5 Specifications 6 Controls Single Pressure Compensator 7 Single Pressure Compensator
More informationTechnical Data... 3 How to Order... 4 Dimensions... 5 Inline Mount Valve... 6 Manifold Dimensions and Part Numbers... 6
Table of Contents Minature Valve Series...3-14 RB Series...3-6 Technical Data.... 3 How to Order.... 4 Dimensions... 5 Inline Mount Valve.... 6 Manifold Dimensions and Part Numbers... 6 S Series...7-9
More informationEscapements. AGE Series
GE Series Escapements merican Grippers, Inc. 171 Spring Hill Road, Trumbull, CT 06611 Tel: 203-459-8345 Fax: 203-452-5943 info@gi-utomation.com www.gi-utomation.com 1 GE-1 Feed Escapement uilt-in ir Cylinder
More informationNo.1. Side approach mechanism Precise lateral contacting. Catalogue 1.1. Test Probes Test Fixtures
No.1 in testing solutions in der Prüftechnik Test Probes Test Fixtures Side approach Precise lateral contacting Catalogue 1.1 16 mm, 1 N contact force INGUN for precise lateral contacting -controlled operated
More informationIdeal for part clamping in weld areas
PIN LOCATING CLAMPS FOR THE AUTOMOBILE INDUSTRY Series PLK Ideal for part clamping in weld areas Completely enclosed finger/pin prevents weld slag from entering Locking mechanism holds panel in place if
More informationParallel Grippers- Two Jaw Precision Spring Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.186 TM Parallel Grippers- Two Jaw Precision Spring Series Mounting Information: Grippers
More informationFOR PART CLAMPING IN WELD AREAS
PLk SERIES PLK PIN LOCATING CLAMP for the Automotive Industry IDEAL FOR PART CLAMPING IN WELD AREAS Enclosed Finger Weld Field Immune Switches PLK01 A ORDERING DATA: SERIES PLK CLAMPS INDEX: Ordering Data
More informationTest Probes Test Fixtures INGUN. Test Fixtures for low PCB volumes. Change made easy
Test Probes Test Fixtures INGUN Test Fixtures Change made easy MA 350/F with customized ATS MA350 force up to 300 N up to 160 x 100 mm MA 3xx-series generous and free accessibility MA 360/F with customized
More informationRectangular photoelectric proximity switches
Rectangular photoelectric proximity switches Features Diffuse sensors with operating distance of 300 mm or 800 mm Through-beam sensors with operating distance of 15 or 50 m Reflex sensors with operating
More informationOptimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationNu Lock Units NFPA and ISO/VDMA Nu Locks
Nu Lock Units NFPA and ISO/VDMA Nu Locks www.numatics.com Table of Contents NuLock Series Features and Benefits 3 How to Order 3 Dimensions 4 Cylinder and Lock Information 5 Installation Information 5
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationSentronicPLUS IO-Link CLASS A Electronic Pressure Regulator. Installation Manual
SentronicPLUS IO-Link CLASS A Electronic Pressure Regulator Installation Manual Sentronic PLUS ASCO NUMATICS Sentronic PLUS Electronic Pressure Regulator Sentronic PLUS is a 3-way proportional valve with
More informationPREVIEW. Fieldbus System for Distributed I/O NEW PRODUCTS
NEW PRODUCTS PREVIEW Fieldbus System for Distributed I/O! Dual Port EtherNet/IP TM Gateway controls up to 8 Valve Manifolds and 8 Input blocks Controls up to 128 Inputs and 128 Outputs Supports QuickConnect
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationAir-Oil Systems, Inc.
Draft Copy 06-24-09 Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components, have
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationWORLD MOTOR VEHICLE PRODUCTION BY COUNTRY AND TYPE QUARTERS June 14, 2018
QUARTERS 2017-2018 June 14, 2018 CONTENTS BASEPROTOTAL BASEPROCARS BASEPROLCV BASEPROHCV BASEPROBC Summation of cars, LCVs, HCVs, heavy buses Cars LCVs HCVs Heavy buses Note: The production of cars and
More informationMaintenance Instructions & Parts List
PM-PTR/LTR-C Automation Actuator Division Wadsworth, Ohio 448 October 7, 993 Rev. October 999 PTR/LTR Series Actuators Maintenance Instructions & Parts List Provide Model Number and Serial Number When
More informationPVG Open Loop Pumps. Bulletin G
PVG Open Loop Pumps Bulletin 4709-G Table of Contents Performance Assurance page 3 Features and Benefits 4-5 Specifications 6 Shaft Torque Ratings 7 Pressure Pick-ups 7 Table of Contents Controls 8-9 Performance
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationTable of Contents. R Series
Table of Contents R Series...-8 Features and Benefits... How to Order.... Standard Specifications.... 5 Options... 6 Cushions... 6 Bumpers... 6 Shock bsorbers... 6 Mounting Options... 7 Shaft Seal Cover
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationDB4 GUIDED SLIDE APPLICATIONS: ISO 9001 REGISTERED RETRACTABLE PINS & LOCATORS PUSHERS CROWDERS THRUSTERS SMALL LIFTERS SLIDES
ISO 9001 REGISTERED DB4 GUIDED SLIDE 1/4" NPT or G1/4 PORTS RAP OR RIGID COUPLER TOOL MOUNTING SURFACE WELKER 70mm BORE PNEUMATIC CYLINDER SOLID STATE CYLINDER SWITCH NAAMS STOPS OR WELKER SMART STOPS
More informationS Series Stainless Steel NFPA Interchangeable Cylinder Line
S Series Stainless Steel NFPA Interchangeable Cylinder Line w w w. n u m a t i c s. c o m Table of Contents S Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Loading and Cushioning 6 Optional
More informationPLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS Ideal for part clamping in weld areas Disappearing Pin Weld Field Immune Switch PLK03 PLK/PLKD PIN LOCATING CLAMPS PATENT PENDING Major Benefits Completely
More informationRotary Vane Actuators
Rotary Vane Actuators Rotary Vane Actuators Unitized Body Turn-Act s patented extrusion combines tube, stator and bolt lobes into a one-piece unitized body. Unique design provides torsional rigidity allowing
More informationOEM Series Rotary Actuators. Air-Oil Systems, Inc.
OEM Series Rotary Actuators OEM Series Rotary Actuators: Table of Contents OEM 1-1/4 (OC) Series...pg. 2 How to Order: OEM 1-1/4 (OC) Series...pg. 3 Dimensional Data...pg. 4 OEM 2-1/2 (OT) Series...pg.
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationPneumatic Solutions for Transportation
Pneumatic Solutions for Transportation Mobile Pneumatic Cylinders Parker s Actuator Division offers a complete line of compact, round body, and tie rod cylinders. Highly engineered to extend product life
More informationBearings for the Cement and Ready-Mix Concrete Industries
Bearings for the Cement and Ready-Mix Concrete Industries Market leading NSK technology that increases bearing life and reduces maintenance costs and downtime. Upgrading to NSK takes your operation to
More informationTRANSPORTATION ADVANCED MATERIALS AND ELECTRICAL POWER SOLUTIONS FOR AERONAUTICS
TRANSPORTATION ADVANCED MATERIALS AND ELECTRICAL POWER SOLUTIONS FOR AERONAUTICS MATERIAL EXPERTISE FOR HIGH TEMPERATURE AND WEIGHT SAVINGS As a worldwide leader of high performance materials, Mersen has
More informationRodless cylinders Rodless cylinders Series RTC. Brochure
Series RTC Brochure Bosch Rexroth AG Pneumatics Series RTC Rodless cylinder, Series RTC-BV Ø 16-80 mm; double-acting; with magnetic piston; integrated guide; Basic Version; cushioning: pneumatic, adjustable
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationElectronic Sensors Solid State, Reed and Proximity Sensors Feedback Packages
Electronic Solid State, Reed and Proximity Feedback Packages & Feedback Contents Hall Effect... 2 Reed Switches... 3 Cordsets... 4 Proximity... 5 Feedback Packages... 8 1 Sensor Specifications Solid State
More informationSeries OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
More informationInformation Technology and Economic Development: An Introduction to the Research Issues
November 1998 Working Papers No. 153 Information Technology and Economic Development: An Introduction to the Research Issues TABLE 1 WORLD-WIDE INFORMATION TECHNOLOGY MARKET BREAKDOWN, 1995
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationCS1 COMPACT POWERED SLIDE
ISO 9001 REGISTERED CS1 COMPACT POWERED SLIDE WELKER 50mm BORE COMPACT CYLINDER NPT OR G PORTS OPTIONAL SOLID STATE CYLINDER SWITCH AVAILABLE METAL SHROUD KEEPS RAILS COVERED AT ALL TIMES (MOVES WITH )
More informationNRL Series Rod Lock.
Series Rod Lock www.numatics.com Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application components
More informationTable of Contents. Numatics 2009 Rev. 1/09
Table of ontents RW Series...-8 eatures and Benefits... How To Order... Replacement omponents... imensions... 5 Technical Specifications... 6 Switch Information....7-8 Numatics 2009 Rev. /09 2 RW-Series
More information1. General company data
Self disclosure 1. General company data 1.1. Company address Company: Address: Zip-Code: City: Country: Telephone: Fax: Email: Internet: Established: Affiliation: Ownership: Legal form: CC Reg no: VAT:
More informationACTUATORS. Magnetically Operated Switches
1 Magnetically Operated Switches Magnetically operated, non-contact sensing system Consists of a magnet on the piston, and a sensing switch mounted to the cylinder tube Switch types: Read switch Solid
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 46-48 www.cmafh.com.7 Parallel Grippers- Miniature Series Double Wedge General purpose: This style gripper
More informationKnife gate valve MP. Data is only for informational purpose. All specifications are subject to change without notice issue 5
Knife gate valve MP Data is only for informational purpose. All specifications are subject to change without notice. 1 2015-06-11 issue 5 Knife gate valve MP Stafsjö s knife gate valve MP is a full bore
More informationFork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
More informationToday Numatics is proud to be a part of the Industrial Automation Division of Emerson Electric Co.
Draft Copy 07-09-09 Draft Copy 06-24-09 Numatics, Inc. is a leading manufacturer of pneumatic products and motion control products. Our broad spectrum of standard, custom developed products and application
More informationApplication Alley. Automotive - Fluid Level. Brake Fluid Level Sensor PARTNER SOLVE DELIVER
PARTNER SOLVE DELIVER Introduction When applying one s foot to the brake pedal, it is taken for granted that the braking mechanism will begin to slow or stop the vehicle. A hermetically sealed reed switch
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationFork through-beam sensors
Fork throughbeam sensors Features Wide range of sizes: fork widths from 2 to 220 mm Metal housings Integrated evaluation unit Connection by means of S8 connector Degree of protection Adjustable sensitivity
More information