TECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA. Hydraulic differential cylinder with end position damping
|
|
- Shonda Young
- 6 years ago
- Views:
Transcription
1 TECHNISCHE DATEN TYP HNZ Hydraulik Differentialzylinder mit Endlagendämpfung TECHNICAL DATA TYP HNZ Hydraulic differential cylinder with end position damping Hydraulik Differentialzylinder mit einstellbarer Endlagendämpfung, Kolbendurchmesser 40 bis 200 mm, Nenndruck max. 300 bar. Sonderausführung nach Kundenzeichnungen sind jederzeit möglich. Hydraulic differential cylinder with adjustable end position damping, piston diameter 40 to 200 mm, nominal pressure max 300 bar. Special versions to customers' drawings are possible at any time. Seite Modell Bauart Page Model Design 2 Typ HNZ Einzelteileliste, Werkstoffe Individual parts, Material 3 Typ HNZ F Flansch am Zylinderkopf Flange on cylinder head 4 Typ HNZ S Flansch am Zylinderboden Flange on cylinder base 5 Typ HNZ E Gewinde am Zylinderkopf Tread on the top 6 Typ HNZ L Fußbefestigung Foot mounting 7 Typ HNZ GM Schwenkzapfen Trunnion 8 Typ HNZ GH Gelenkauge am Boden Pivot eye on base Stand As of date 02.18
2 Typ HNZ Die Baureihe HNZ wurde für den Einsatz unter schwierigsten Arbeitsbedingungen in den verschiedensten Gebieten der Industrie entwickelt, wo hohe Zuverlässigkeiten gefordert werden. Robuste Konstruktionen, hergestellt durch modernste Technologie, garantieren eine lange Lebensdauer. Kolbengeschwindigkeiten von 0,5 m/sec. sind zulässig, darüber auf Anfrage. Die normale Betriebs-temperatur liegt bei -20 C bis +80 C. The HNZ Series was developed for applications under the toughest working conditions in a wide variety of fields of industry where high reliability is demanded. Sturdy designs, manufactured using the latest technology, guarantee a long service life. Piston speeds up to 0.5 m/s are permissible, higher speeds on request. The normal operating temperature lies between - 20 C and +80 C. Pos. Item Einzelteile Individual parts Werkstoff Material 1 Kolbenstange Piston rod Stahl, maßhartverchromt Steel, hard chrome-plated to size 2 Abstreifer Wiper seal NBR / Polyurethan NBR / polyurethane 3 Führungsbuchse Guide bush Rotguß Red bronze 4 Zylinderkopf Cylinder head Stahl Steel 5 Stangendichtung Rod seal NBR Gewebe NBR fabric 6 O-Ring O-ring NBR 7 Sicherungsring Retaining ring Stahl Steel 8 Zylinderrohr Cylinder barrel Stahl, gehont Steel, honed 9 Dämpfungsbuchse Damping bush Stahl Steel 10 Kolben Piston Stahl Steel 11 Kolbendichtung Piston seal NBR Gewebe NBR fabric 12 Führungsbuchse Guide bush Rotguß Red bronze 13 Kolbendichtung NBR Gewebe NBR fabric 14 Rückschlagventil Non-return valve Stahl Steel 15 O-Ring O-ring NBR 16 O-Ring O-ring NBR 17 Drosselventil Throttle valve Stahl Steel Sonderausführung z. B. Edelstahl, Viton-Dichtungen, mehrschichthartverchromte Kolbenstange, Sondergewinde an der Kolbenstange sowie nach Kundenzeichnungen sind jederzeit möglich. Special versions, e.g. stainless steel, Viton seals, multilayer hard chrome-plated piston rod, special thread on the piston rod and to customers' drawings are possible at any time.
3 Typ HNZ F Ab Kolbenstangen-Ø 55, Bohrung für Hakenschlüssel From piston rod diameter 55, bore for hook wrench WAF SW I a/f L5 L3 L4 G L6 Ab Kolben-Ø 100, mit Rückschlagventil From piston dia. 100 non-return valve E D M D4 D1 D2 L1 L2 L8 Einstellbares Drosselventil Adjustable throttle valve L + Hub I Stroke D7 D6 D5 P = Anzahl der Befestigungsbohrungen P = Number of mounting bores D D D D 7 11, L + HUB Stroke 142,5 151,5 179,5 192, L 2 32,5 38,5 50,5 57, L 3 95,5 102,5 121,5 131, L 4 87,5 94,5 109,5 117, L 5 52,5 52,5 57,5 65, L 7 2,5 2,5 2,5 2, L P
4 Typ HNZ S Ab Kolbenstangen-Ø 55, Bohrung für Hakenschlüssel From piston rod diameter 55, bore for hook wrench WAF SW I a/f L5 L3 L4 G L6 Ab Kolben-Ø 100, mit Rückschlagventil From piston dia. 100 non-return valve E D M D1 D2 D4 L1 L2 Einstellbares Drosselventil Adjustable throttle valve L + Hub I Stroke L8 D7 D6 D5 P = Anzahl der Befestigungsbohrungen P = Number of mounting bores D D D D 7 11, L + HUB Stroke L L 7 2,5 2,5 2,5 2, L P
5 Typ HNZ E Ab Kolbenstangen-Ø 55, Bohrung für Hakenschlüssel From piston rod diameter 55, bore for hook wrench WAF SW I a/f L5 L3 L4 G L6 Ab Kolben-Ø 100, mit Rückschlagventil From piston dia. 100 non-return valve E M D M1 D1 D2 L1 L2 Einstellbares Drosselventil Adjustable throttle valve L + Hub I Stroke L + HUB Stroke L M M16 x1,5 M 22 x1,5 M 28 x1,5 M 35 x1,5 M 45 x1,5 M 58 x1,5 M 65 x1,5 M 80 x 2 M 100 x 2 M 110 x 2 M 1 M 58 x1,5 M 65 x1,5 M 80 x 2 M 100 x 2 M 118 x 2 M 150 x 3 M 170 x 3 M 185 x 3 M 210 x 3 M 225 x 3
6 Typ HNZ L D L + HUB Stroke L L L 9 + HUB Stroke L L L L ) Stangen-Ø normal 1) Rod dia. normal 2) Stangen Ø-verstärkt 2) Rod dia. reinforced
7 Typ HNZ GM D D L + HUB Stroke L L 8 min L L
8 Typ HNZ GH Ab Kolbenstangen-Ø 55, Bohrung für Hakenschlüssel From piston rod diameter 55, bore for hook wrench WAF SW I a/f L5 L3 L4 G L6 D4 Ab Kolben-Ø 100, mit Rückschlagventil From piston dia. 100 non-return valve E Einstellbares Drosselventil Adjustable throttle valve a a D M D1 D2 R L1 L2 L + Hub I Stroke L9 L8 D L + HUB Stroke L L L R a
TECHNISCHE DATEN TYP HDT TECHNICAL DATA. Double-acting hydraulic telescopic cylinder,
TECHNISCHE DATEN TYP HDT Hydraulisch doppeltwirkender Teleskopzylinder TECHNICAL DATA TYP HDT Double-acting hydraulic telescopic cylinder Hydraulisch doppeltwirkender Teleskopzylinder, bis zu 4 Stufen,
More informationMOBILE LIGHT NH21 NH25. Lind Jensens Maskinfabrik A/S Kroghusvej 7, Højmark DK-6940 Lem St. Denmark Home page:
MOBILE LIGHT NH21 NH25 Oversigtsblad Übersicht Design features for NH 21 cylinder für NH 21 Zylinder for NH 21 cylinder * Grundtyper/ Stempelstangsophæng/ Zylinderbefestigung/ Kolbenstangenbefestigung/
More informationHydraulic cylinders. Standard & custombuilt
Hydraulic cylinders Standard & custombuilt Introduction Hydrowa specialists in standard and special hydraulics Hydrowa specializes in hydraulics. Although we offer a comprehensive standard package, our
More informationFITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE
4 FITTINGS MIT CHEMIESCHUTZSCHICHT FITTINGS WITH CHEMICAL PROTECTION LAYER FITTINGS AVEC BARRIÈRE ANTI- CORROSION ÉPAISSE Typ/Type CS-VE/CS-EP PN 10/10 AUS GLASFASERVERSTÄRKTEM VINYLESTERHARZ (VE) ODER
More informationHydraulic cylinder Type LHZ
Hydraulic cylinder Type LHZ Double acting Diam. 0 mm PN [pmax.] = 2 bar Connecting dimensions Diam. to following CETOP R 8 H and ISO/DIS /I Diam. to 0 as per CETOP R 73 H and ISO/DIS 7..0.08 Symbol Description
More informationGHZ / GHZO. (two hydraulic-cylinder-series) GHZ GHZO:
HZ / HZO (two hydraulic-cylinder-series) HZ HZO: Piston diameter: Operating pressure: Double-acting Damping on both sides Integral limit switch Stroke monitoring Different piston seals 3-100 mm bar Piston
More informationAHP Blockzylinder mit langem Hub
AHP Blockzylinder mit langem Hub AHP Block cylinder with long stroke AHP Vérins blocs avec course longue BRB 0 Wir bringen Qualität in Umlauf We set quality in motion ous faisons avancer la qualité Blockzylinder
More information)D]RQVNLNRPDGL]DãWLüHQLVXVDHSRNVLERMRPLOLHSRNVLSUDãNRPSODVWLILFLUDQMH Bušenje
Primjena )D]RQVNLNRPDGLXSRWUHEOMDYDMXVH]DVSDMDQMHSODVWLþQLK39&',1XFLMHYRYRGQLPVLVWHPLPD]DYRGXLQHXWUDOQH medije Radni tlak 10bara Dozvoljeni radni tlak 16 bara maks. Radna temperatrua 70ºC maks. MATERIJAL
More informationBaureihe E. Series E. Insulation and Lightweight Design Sandwich elements with a thickness of 20 mm for low heat transfer values of 1,2 W/m²K.
Baureihe E. Series E Baukastensystem Schränke der Baureihe E bestehen aus Elementen aus glasfaserverstärktem Polyester-Sandwich verschiedener Größen. Die Elementbauweise gibt höchste Flexibilität zur Konstruktion
More informationAIR CYLINDER Series A23, A24
A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings
More informationIndex. Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119. Blindflansche ab Seite 123 Blind flanges from Page 123
Flansche Flanges Index Vorschweißflansche ab Seite 119 Welding neck flanges from Page 119 Blindflansche ab Seite 123 Blind flanges from Page 123 Lose Flansche ab Seite 125 Loose flanges from Page 125 Glatte
More informationAIR CYLINDER Series A25, A26
A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.
More informationPAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A
ISO A ACCIAIO STEEL STAHL ACIER 74 Caratteristiche tecniche I Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc 06 1 6.3 5 35 12
More informationISO PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125
ISO 15552 PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125 PAC-Y GENERAL INFORMATION PAC-Y SERIES ISO 15552-32 - 125 CUSHIONING CYLINDER ELOXAL PLATE AND SPECIAL ROD SEAL PROVIDING HYGIENE AND LONG WORKING
More informationLet s Fall in Love. The new unilite. Advertising
Let s Fall in Love. The new unilite. Advertising Company The Lighter Specialist unilite Feuerzeuge Führend in Qualität und Sicherheit TÜV-geprüfte Sicherheit mit GS-Zeichen bei Volumenprodukten ISO 9001
More informationZBD 1001 Differential Cylinder Data sheet 04.16/DS13210
ZBD 1001 Differential Cylinder Data sheet 04.16/DS13210 Description: This series represents the logical and consistent supplementation of already ISO 6022 (250 bar) and ISO 6020/1 (160 bar) standard series.
More informationAIR CYLINDER Series A12, A13
A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long
More informationDescription. Piston rod end. Technical data. Datasheet Type 47 Single rod cylinder according to DIN / ISO 6020/1
CE CV LE MM KF Datasheet Type 47 Single rod cylinder according to DIN / ISO 6020/1 Description MM Piston rod end KK - Standard cylinder to ISO 6020/1 - Strokes up to 2000 mm - Piston diameter: 25 320 mm
More informationDatenblatt Flüssigkeitsringpumpe Data sheet liquidring pump
Datenblatt Flüssigkeitsringpumpe Data sheet liquidring pump Serie Series L-BV5 L_300 Flüssigkeitsringpumpen Liquid ring pumps 3 AC; 50/60 Hz 3 AC; 50/60 Hz Vakuumbetrieb Vacuum operation Typen Types 2BV5
More informationOutdoor Bushings DIN kv / A Freiluft Durchführungen DIN kv / A
Outdoor Bushings DIN 0 kv / 0-0 A Freiluft Durchführungen DIN 0 kv / 0-0 A Qty. 0 Top porcelain A Bottom porcelain B Brass stem Brass washer E Brass washer G Ring gasket J Plain gasket (M) Flange gasket
More informationB Precision Ground Plates and Flat Bars. E Ground Precision Components. G Elastomer-Bars, -Sheets, -Sections
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationL Standard Parts for Mould Making
A Die Sets B Precision Ground Plates and Flat Bars C Lifting and Clamping Devices Shanks, Lifter Studs and Lifting Hooks, Eyebolts Clamping Claws, Screws and Bolts D Guide Elements E Ground Precision Components
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationScrewed-head cylinders
Screwed-head cylinders Series HB DESCRIPTION Cylinders series HB are manufactured to be fixed on machine edges without the use of mountings. The end cap acts as a mounting device in the versions: hinge-mounted,
More informationCylinders DIN ISO 6431 and VDMA Bores from 32 to 125 mm
Double acting Standard executions Version Shape of barrel Symbol Type MAGNETIC STANDARD AMA AMT 1 For the magnetic reed switches type ASV see from page 1.110.1. For coupling cylinders/reed swiches/brackets
More informationA new Dimension. Advertising
A new Dimension Advertising The lighter specialist TOM Feuerzeuge Führend in Qualität und Sicherheit TÜV-geprüfte Sicherheit mit GS-Zeichen bei Volumenprodukten * ISO 9001 Zertifizierung der Produktionsstätten
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More informationAE Stahlblech AE Sheet steel
AE Stahlblech AE Sheet steel AE 1030.500 AE 1031.500 AE 1032.500 AE 1033.500 AE 1034.500 AE 1035.500 AE 1036.500 AE 1037.500 AE 1038.500 AE 1039.500 AE 1045.500 AE 1050.500 AE 1054.500 AE 1055.500 AE 1057.500
More informationThe world s thinnest lighter. Ultra thin - Ultra light. Advertising
The world s thinnest lighter Ultra thin - Ultra light Advertising Features A2019 The Lighter Specialist unilite Feuerzeuge Führend in Qualität und Sicherheit ISO 9001 Zertifizierung der Produktionsstätten
More informationThe world s thinnest lighter. Ultra thin - Ultra light. Advertising
The world s thinnest lighter Ultra thin - Ultra light Advertising Features The Lighter Specialist unilite Feuerzeuge Führend in Qualität und Sicherheit ISO 9001 Zertifizierung der Produktionsstätten Kindergesichert
More informationProvenair Series AN Cylinders Parts List / Service Instructions
Provenair Series AN Cylinders Parts List / Service Instructions 1-1/2, 2, 2-1/2, 3-1/4 and 4 BORES EXTRUDED BARREL CONSTRUCTION 5, 6, 8 and 10 BORES TIE ROD CONSTRUCTION TYPE: Aluminum, repairable, square
More informationSTANDARD handles. outside. Rose. HoPPE LiVERPooL Aluminum. Aluminum. Aluminum. Aluminum. inside. HoPPE LiVERPooL. Aluminum. HoPPE LiVERPooL.
handle SeleCTiON STANDARD handles HoPPE ATLAnTA 1.100 PATio HoPPE 5004 Handlebar 330 mm AUBi spruce Trendline 04 spruce Classic 01 HoPPE E5011 Handlebar 400-1800 mm RAL 9010 Pure white RAL 7016 Anthracite
More informationRP SERIES 200 psi Mill-type Cylinder
Actuation Solutions and Systems for the SERIES 200 psi Mill-type Cylinder Delivering superior long-term performance and value Designed and engineered for severe-service applications Bore Size: 2 to 20
More informationHydraulic / 100 bar. GATEWAY to new technologies.
Hydraulic / 100 bar GATEWAY to new technologies. 2 Advantages through innovative technology Schwenkmotor PSM highly perfected end cushioning for absorption of kinetic energy - negating the need for expensive
More informationNext Topmodel. Advertising
Next Topmodel Advertising Features The lighter specialist TOM Feuerzeuge Führend in Qualität und Sicherheit TÜV-geprüfte Sicherheit mit GS-Zeichen bei Volumenprodukten * ISO 9001 Zertifizierung der Produktionsstätten
More informationSeries SIT Hydraulic Cylinders Single acting Internal Thread
ax: (604) 5-0070 Toll ree 1-800-98-1170 Series SIT Hydraulic Cylinders Single acting Internal Thread Pressure:,500 psi Working 3,500 psi Non-Shock Bore Sizes: 1.5 to 3.5 Rod Sizes: to 3.00 Ports: Attachments:
More informationSUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250
SUPERIOR CONSTRUCTION FEATURES SERIES B AIR CYLINDERS, 1 2" THRU 2" BORE SIZE MAXIMUM PSI 250 ALUMINUM HEADS & CAPS LARGE PORTS PISTON PACKING PISTON WIPER BRONZE BEARING PACKING TUBE SEAL CYLINDER TUBE
More informationFALCO AF3009. en Spare parts list Tire changer Equipment. Parti di ricambio Smontagomme
FALCO AF009 it Parti di ricambio Smontagomme en Spare parts list Tire changer Equipment 9 0 870 00-07- Hinweise / Notes / Remarques / Advertencias FALCO AF009 Diese Ersatzteilliste enthält zusätzlich zu
More informationMRAD Universal Measuring Arm System For Optical/Magnetic and Fiber Optic Encoders
Measuring Wheel Meauring Arm Encoder (Absolute or Incremetnal) Spring-loaded, adjustable measuring arm for universal applications Measuring wheels are utilized in combination with encoders to measure material
More informationZBD 2512 Differential Cylinder Data sheet 07.16/DS13660
ZBD 2512 Differential Cylinder Data sheet 07./DS Description: The STORZ hydraulic cylinder series ZBD 2512 for the nominal pressure of 250 bar is replaceable with the CDH1 series. By fixing the mounting
More informationStraight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16
Straight Bodied Flanged Valve 7030 DN 15 up to DN 150 PN 16 Pneumatically operated straight bodied seat valve for the use in chemical plants, process technology and industrial automation. Unaffected by
More informationLEERSEITE / BLANK PAGE
LEERSEITE / BLANK PAGE d01330 Seite / Page 7-1 Revision 2, 03/01 05805 1 14 13 9 8 19 17 10 18 17 M 7 6 O 18 17 19 17 22 35 36 21 34 15 20 16 23 24 25 * 21 D 13 22 2 26 27 A 3 4 B 1 5 2 B 29 A 3 ** **
More informationRUwg K0 D / K0 E. Technische Daten M Technical data. Für Ringzugösen M For toroidal drawbar eyes Ø 76 VG 74059, ECE 55-01, Klasse L M Class L
Typ / Type RUwg K0 D / K0 E Für Ringzugösen M For toroidal drawbar eyes Ø 7 VG 70, ECE -01, Klasse L M Class L 0 10 12 0 80 100 23 110± 83±0, n10, +1,00-0,30 K0 E Sicherung M K0 E Safety device ø d 2 K
More informationAIR CYLINDERS cylinders with pro?led barrel / tie rods standardised to ISO double acting. Series tie rods YOUR SELECTION
compact cylinders, standardised to ISO 21287 compatibility for assembly ISO 15552 mountings double acting - Series 449 short stroke cylinders single acting / double acting Series 441 AIR CYLINDERS cylinders
More informationAngle Seat Valve 7010
Angle Seat Valve 7 N 8 up to N 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. ompact design Unaffected by lightly contaminated
More informationCYLINDER PARTS LIST. R/S Series Cylinders, 1978 through July AB Series Cylinders, 1988 through AF Series Cylinders, 1990 through 1993
The purpose of this book is to provide general guidelines to cylinders and their replacement parts for machinery built between 1978 and the present. Approximate dates are intended to assist in pinpointing
More informationAir Cylinders Type : ISO-6431 & VDMA-24562
Air Cylinders Type : ISO-6 & VDMA-262 Conform to ISO: 6 & VDMA: 262 standards. Double acting, with adj. cushioning at both ends. sizes : Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0 & Ø0 Profiled aluminum tube with hard
More informationSeries SS Solid Stainless Cylinders
Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O
More informationiberdur INHALTSVERZEICHNIS TABLE OF CONTENTS SOMMAIRE 2.1 EINLEITUNG INTRODUCTION INTRODUCTION 2 / 1
INHLTSRZEIHNIS TLE OF ONTENTS SOMMIRE 2.1 EINLEITUNG INTRODUTION INTRODUTION 2.2 MESSUNGEN DIMENSIONS DIMENSIONS OGEN ELOW OUDE T-STÜK TEE-FITTING TE REDUZIERTES-T-STÜK REDUED-TEE-FITTING TE REDUIT ROHRSTTEL
More informationThe Winning Force MS SERIES MECHANICAL SHEAR. Hi-Speed Accurate Efficient Performance
The Winning Force MS SERIES MECHANICAL SHEAR Hi-Speed Accurate Efficient Performance 1 The Winning Force As a total supplier for sheet metal manufacturing with almost 60 years of experience, Durma understands
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8, /2, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationDouble-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80
> Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers
More information86P40-2, 86P60-2 Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information
86P40-, 86P60- Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information Application: Accurate positioning of sheet metal parts in welding equipment and handling systems. At the
More informationCAT. No. KS-570E. SCS Single Action Push Type. SCD Double Action Type. super. cylinder FUJIKURA RUBBER LTD.
CAT. No. KS-570E SC SCS Single Action Push Type SCD Double Action Type super cylinder FUJIKURA RUBBER LTD. General Description of BF Cylinders FC Series : Single/Double Action Standard Cylinders SC Series
More informationSERIES PA PNEUMATIC CYLINDERS FOR VALVE ACTUATION BORE SIZE: 3 1/4 TO 20 RATING: 150 PSIG (1000 KPA)
BORE SIZE: 3 /4 TO 0 RATING: 50 PSIG (000 KPA) PNEUMATIC CYLINDERS FOR VALVE ACTUATION FEATURES THE PA SERIES OF VALVE ACTUATORS ARE DESIGNED TO AUTOMATE VALVE OPERATION. THESE ACTUATORS CAN BE ADAPTED
More informationALLWEILER. Pressure relief valves, indirectly pilot controlled. Series DVI
Pressure relief valves, indirectly pilot controlled Series DVI Range of application The pressure relief valves of Series DVI can be applied for maximum operating temperatures up to 150 C (higher temperatures
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationAIR CYLINDER Series A75, A76
A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both
More informationDouble acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous.
Double acting Standard executions Version Symbol Type Parallel from bore 25 mm. S4 On request, they can be supplied according Directive 94/9/EC - ATEX II 2 GDc T5 Options Special versions on request Suffix
More informationTable of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
More informationStandard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationFUEL PRESSURE REGULATORS. Fig. A. Fig. B. Fig. C. Fig. D MOTORSPORT COMPONENTS
MOTORSPORT COMPONENTS B FUEL PRESSURE REGULATORS Purpose and Function. The fuel pressure regulator is designed to maintain the differential between fuel rail pressure and intake manifold pressure constant
More informationSLC Guard locking safety switch. The new generation of safe mechanical guard locking switches
SLC Guard locking safety switch The new generation of safe mechanical guard locking switches Surely. Exactly the right solution. With machines, it is imperative to ensure that there is no access or entry
More informationTwin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationSINGLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod Pin Hole 3 Part Numbering System 4 Dimensions 5 Buckling Calculations 6 Buckling Force/ Graphs 7 Load Calculations 8 PBV Flow Chart
More informationENG ECCENTRIC PRESSES C-FRAME PRESSES STRAIGHTSIDE PRESSES 1 CONNECTING ROD STRAIGHTSIDE PRESSES 2 CONNECTING ROD
ENG ECCENTRIC PRESSES C-FRAME PRESSES STRAIGHTSIDE PRESSES 1 CONNECTING ROD STRAIGHTSIDE PRESSES 2 CONNECTING ROD C-FRAME PRESSES C-FRAME PRESSES C-FRAME PRESSES FRAME Project and verification of main
More informationCompact Cylinder. Series SZ. Specifications. Features: Features. Ø12mm - 100mm
SZ Compact Cylinder Specifications Features Type Series Compact Cylinder SZ Configurations SZ6 Double Acting, Single Rod, SZD6 Double Acting, Double Rod, SZV6 Double Acting, Non-Rotating, SZ7 Single Acting,
More informationSERIES PSI OPERATING PRESSURE HEAVY HYDRAULIC DUTY CYLINDER HEAVY DUTY HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC CYLINDERS, INC
CYLINDERS, INC SERIES 2500 3000 PSI ORATING PRESSURE HEAVY DUTY HEAVY HYDRAULIC DUTY CYLINDER HYDRAULIC CYLINDER PURAKAL CYLINDERS, INC PURAKAL P.O. Box 22038 CYLINDERS, INC P.O. Eugene, Box OR 22038 97402-0414
More informationDOUBLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod 3 Part Numbering System 4 Basic Dimensions 5 Load Calculations 6 Load Calculations 7 Buckling Calculations 8 Buckling Calculations
More informationXTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationFLY BABY U.S.MAIL. Radio control model R/C Flugmodell INSTRUCTION MANUAL MONTAGEANLEITUNG U.S.MAIL VERSION SPECIFICATIONS TECHNISCHE DATEN
Radio control model R/C Flugmodell INSTRUCTION MANUAL MONTAGEANLEITUNG FLY BABY U.S.MAIL VERSION U.S.MAIL Item No. 1600133 SPECIFITIONS Wingspan 1210mm (49in.) Length 880mm (34.6 in.) Electric Motor (See
More informationHeavy Industrial Shock Absorbers CA 2 to CA 4
Heavy Industrial Shock Absorbers CA 2 to CA 4 The CA 2 to CA 4 complete the ACE product range of self-compensating shock absorbers. With these units ACE has a continuous range of selfcompensating units
More informationSubsea and industrial hydraulic manufacturers
Cylinders C10 & Cepac Cylinders Operating Parameters Standard cylinders Working pressure External sea pressure - Cepac subsea cylinders Temperature range Hydraulic fluid Rod speed Rec filtration 250 bar
More informationSafety Shock Absorbers SCS300 and 650
s SCS300 and 650 60 The safety shock absorber series SCS300 to 650 are based on the innovative technology of the SC² series by ACE. y combining the piston and inner tube, an energy capacity up to 525 m
More informationHYDRAULIC CYLINDER HYC
www.hydropa.de HYDRAULIC CYLINDER HYC www.hydropa.de INTRODUCTION The hydraulic cylinder, as a link between hydraulic control and the machine, is suitable for use in many areas of industry, such as pressing
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationRound Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25
Round Body Minicylinders, DIN/ISO 6432 Series 16, 24 and 25 Series 16: ø 8-10 - 12 bumpers Series 24: ø 16-20 - 25 bumpers and magnetic piston Series 25: ø 16-20 - 25 adjustable cushion and magnetic piston»»
More informationControl Valve 8021 with integrated positioner
Control Valve 8021 GS 3 series DN 15 up to DN 200 Pneumatic control valve for the control of neutral and aggressive fluids Space saving wafer type construction Lowest possible weight Quiet operation Fast
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationDN series - Standard cylinder
series - cylinder Double piston packing type series ISO-431 specification series Provide CAD external dimension. DMB DU K Rod Locking his product : E End lock Use for longer stroke request DCK2 DCQ Pin
More informationPURAKAL SERIES 100 TABLE OF CONTENTS
TABLE OF CONTENTS How to Order Cylinder......................... Repair Kit......................... Seal Kit......................... Warranty......................... Parts List.........................
More informationSMS Solid Stainless Cylinders
SMS Solid Stainless Cylinders Space Saving and Conventional Lengths Pneumatic to 200 PSI Hydraulic 400 to 500 PSI Non shock /8,, 2, 3 Bore 300 Series Stainless Exterior Assures Aesthetics and Function
More informationMeier'sNeuheitenAG Werbe-& Geschenkartikel. Markenfeuerzeuge
Meier'sNeuheitenAG Werbe-& Geschenkartikel Markenfeuerzeuge Features The lighter specialist TOM Feuerzeuge Führend in Qualität und Sicherheit TÜV-geprüfte Sicherheit mit GS-Zeichen bei Volumenprodukten
More informationStandard strokes (for all diameters) Stroke tolerance (ISO 15552)
Series 19-192 Cylinders according to standard ISO 12 COIHT Construction characteristics nd plates Rod Barrel Rod-guide bushing Piston Seals Cushion adjusting screws die-casting aluminium C chromed steel
More informationSeries MH MH13 ISO MX1 ISO MX3 ISO MX2 MH12 MH10 MH36 MH35 MH42 ISO ME5 ISO ME6 ISO ME2 MH62 MH64 ISO MP1 ISO MP5 ISO MP3 MH61 MH72
Series MH MH MH2 MH ISO MX ISO MX ISO MX2 MH MH MH ISO M ISO M ISO M2 MH MH2 MH ISO MP ISO MP ISO MP MH MH2 MH ISO MT ISO MT2 ISO MT Double Rod nd NPA MDX Milwaukee Cylinder Series MH ISO Metric Hydraulic
More informationSERIES MH (NFPA) CYLINDER
MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation
More informationWIDE OPENING PARALLEL GRIPPER
News 2001 S E R I E S CGL Wide Opening Parallel Gripper Series CGL Piston diameter 10, 16, 20, 25 and 32 mm, magnetic The wide opening parallel gripper mod. CGL is available in 5 different sizes and has
More informationTURNING AND MILLING IN ONE SET-UP
TURNING AND MILLING IN ONE SET-UP Application example - face driver CoE in combination with a revolving live centre. Turning and milling workpieces in one set-up. Video CoE 2036 CONSTANT FACE DRIVERS The
More informationApplication Notes Recommended Print Modes for Roland Printers
Application Notes Recommended Print Modes for Roland Printers Recommended Print Modes for Roland Printers ErgoSoft AG Moosgrabenstr. 13 CH-8595 Altnau, Switzerland 2011 ErgoSoft AG, All rights reserved.
More informationMobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationIndustrial Shock Absorbers MC33 to MC64
Industrial Shock Absorbers MC33 to MC64 Self-Compensating 36 This range of self-compensating shock absorbers is part of the innovative MAGUM series from ACE. You profit from the enhanced product life in
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationElectrically operated poppet valve. The manual override is detent and is operated by screw driver.
Valves > electrically operated valves > Series MS- Technical details Connection Nominal size Temperature range Medium Series MS- page Materials M5 1. mm -1 C... +7 C Filtered, oil-free and dried compressed
More information60AZinkenverstellgeräte. 60A Ajusteurs de Fourches
Parts Manual Ersatzteilliste Manuel de pièces détachées c 60A Fork Positioners 60AZinkenverstellgeräte 60A Ajusteurs de Fourches Last revision: 24/03/2011 cascade Parts Manual - 60A82017 35D Fork Positioner
More informationClean. Oily water separator. Water Treatment. type tested acc. to IMO-Res. MEPC 107 (49) max. 4,5 ppm under test conditions. GmbH
Clean Water Treatment Oily water separator type tested acc. to IMO-Res. MEPC 107 (49) max. 4,5 ppm under test conditions GmbH EC-CONFORMITY MARINE EQUIPMENT DIRECTIVE control voltage system off stage 1
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More information