GHZ / GHZO. (two hydraulic-cylinder-series) GHZ GHZO:
|
|
- Derick Rose
- 5 years ago
- Views:
Transcription
1 HZ / HZO (two hydraulic-cylinder-series) HZ HZO: Piston diameter: Operating pressure: Double-acting Damping on both sides Integral limit switch Stroke monitoring Different piston seals mm bar Piston diameter: Operating pressure: Double-acting Easy to maintain Competitive in price Different piston seals mm 160 bar Type-code: HZ O 63 /36 / 63 / 0 SS K RIBI-hydraulic cylinder with damping RIBI-hydraulic cylinder without damping DES = induction-limit switch Piston 3,,, 63, 80, 100 Piston rod 18,, 8, 36,, Stroke in mm Mouting type: V = Flange front H = Flange back S = Swivel head back or front SV = Swivel head back or front reinforced SS = Swivel head on both sides SSV = Swivel head on both sides reinforced L = Rigid bearing for bolt on back W = Thread head F = Mouting feet Z = Pivot bearing K = Synchronous cylinder/ constant velocity cylinder
2 3-100t damping) u HZOylinder witho u lic c u a r d y h I (RIB - Piston rod - Cylinder tube - Max. translational speed 0.5m/s - Piston size Ø 3-100mm - Operating pressure max. 160bar, welded model A B C C1 D1 D D3 D4 D5 D6 D M1 4 M16 Mx1.5 6 M4x 75 Mx 95 M39x L M N O P Q R D8 M1 M16 Mx1.5 M4x Mx M39x3 S T U V1 V W X Y hard-chrome plating honed / rolled E F H J K L /4'' 3/8'' 1/'' 1/'' 3/4'' 3/4'' min. Stroke Piston area Pull force area 8.04 cm² 1.56 cm² cm² cm².6 cm² cm² 5. cm² 8.76 cm² cm² 1.00 cm² cm² cm² L1+Stroke A C1 C E B Basic type F D3 ~D4 D1 D O /4 4 K
3 M M D7 V Flange front H Flange back D5 D6 N O S Swivel head back or front X W L+Stroke P O S SS Swivel head on both sides R V1 T L Rigid bearing for bolt on back P Q U R V with bushing Option: Threaded piston rod D8 Y Y X
4 HZO (structure and spare part) HZO HZO 3+ Piston rodseal Wiper HZO -100 Type LD
5 HZ 3-80 (RIBI hydraulic cylinder with damping) - Adjustable damping on both sides - Max. translational speed 0.5m/s - Piston size Ø 3-80mm - Operating pressure max. bar, connected model - Piston rod hard-chrome plating - Cylinder tube honed / rolled A B C D D1 D D3 D4 D5 D6 D7 D8 D9 D10 E F H H1 H J K1 K L1 L L M4x Mx 95 M1 4 M M16-1 1/4'' M16 M Mx /8'' M x1.5 6 M M4x /'' M M Mx /'' M39x3 70 3/4'' L4 L5 L8 L9 M N O P Q R1 R S1 S T U1 U U3 V1 V W1 W W3 X1 X Y1 Y Z1 Z Mx Mx M55x M70x M85x adjustable damping Basic type C E L1+ Stroke E H D6 D3 check valve D M D1 D D D5 w Thread head A B F D4 L + Stroke F position of proximity switch
6 J K1 D8 V Flange front D7 H Flange back P F Mounting feet (max. 100 bar) O H1 K N L3 + Stroke Q R 0.8 Z Pivot bearing D10 H L8 L9 + Stroke 1x Z1 Z S Swivel head back or front R1 S1 4 + Stroke U3 U1 V1 W1 SS Swivel head on both sides Y1 X1 W3 SV Swivel head back or front reinforced SSV Swivel head reinforced on both sides R D9 S T L5 + Stroke U3 U V Y W X
7 Mx HZ 100 (RIBI hydraulic cylinder with damping) - Adjustable damping on both sides - Max. translational speed 0.5m/s - Piston size Ø 100mm - Operating pressure max. bar, connected model - Piston rod hard-crome plating - Cylinder tube honed / roled adjustable damping Basic type 10xM1 SW Stroke R1/'' (R3/4'') 1 ab Stroke TK Stroke check valve V Flange front 60 proximity switch H Flange back TK 180 S Swivel head back or front Stroke 61.5 SS Swivel head on both sides 1 88
8 HZ (structure and spare part) HZ -80 HZ 3+ Simko-gasket HZ Rod seal Staring Wiper Rod seal HZ 100
9 Tolerance buckling load Calculation: Euler Case II Safety margin length piston rod Ram force FK in N (Normal case) 3 4 Loading case l l l l Free Buckinglength L K Length to diameter ratio λ l l 0.7l 0.l l l 0.7l 0.l i i i i
10 11. HZ DES (with inductive-proximity switch) Safe and precise detection of end positon for heavy duty operating conditions High repetitive accurancy Simple assembly of proximity switch Switch point: Adjustable of 1-3 mm Basesetting: to against Max. 3/4- turn back max. 1mm M1x1 Inductive proximity switch 10e7 Operating voltage UB Current carrying capacity la Switching frequency f max. Material of body Coupling type Protection category Switching function V DC 1 ma 1000 Hz INOX-Steel Plug connection IP68 PNP closer 5.3x.4 Sw
XG*-***-****-***-****
Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...
More informationStandard Cylinder Series SZ 100
Standard Cylinder Series SZ 100 Maximum operating pressure up to 100 bar Choice of 13 different piston sizes between 12 und 200mm and 23 different attachments Rugged yet compact design with good guiding
More informationPneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552
Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationINTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
More informationbar -20 C C ( C for high temperature version) 1000 mm
Technical details Cylinders > piston rod cylinders > ISO 15552, double acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C... +80 C ( 0... +150 C for high temperature
More informationStainless steel Cylinders Series 90
90 S E R I E S Catalogue 200 Stainless steel Cylinders Series 90 DIN/ISO 643 Single and double-acting (magnetic) ø 32, 40, 50, 63, 80, 00 and 25 cushioned Stainless steel cylinders Series 90 ø 32, 40,
More informationPneumatic cylinders, piston-ø 8 25 mm Single acting DIN ISO 6432
Pneumatic cylinders, piston-ø 25 mm Single acting DIN ISO 6432 Technical data for series HE Order code HE-16-025 Series Piston-Ø Stroke length (mm) Design and function Single acting pneumatic cylinder
More informationPneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel G1/8 to G1/2 piston Ø 32 to 100 mm
Pneumatic cylinders series CX Double acting with magnetic piston, ISO 15552, stainless steel 000 400 Order code CX-032-0250-000 Note: Piston Ø 125, 160 and 200 on request. Series Piston Ø Stroke length
More informationTwin Rod Non Rotate Cylinders RDV and AZ
Twin Rod Non Rotate Cylinders RDV and AZ A range of twin rod cylinders designed for use in non rotate applications specifially suited to the handling and packaging environments. Offering a range of double
More informationScrewjack options. When stainless steel screws are specified, we can supply the flange end and rod end in stainless if requested.
Raised cover CA Available for MA screwjacks, the steel raised covers with toleranced dimensions act as a centring register, also allow the fitting of bronze guide bushes, protective tubes and bellows.
More informationPneumatic swivelling units series RT
Pneumatic swivelling units series Rack and pinion movement. Continuously adjustable stroke. Large ball bearings on the shaft. Through hole in the pinion. Optional rubber bumpers (FGD) or hydraulic shock-absorber.
More informationSINGLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod Pin Hole 3 Part Numbering System 4 Dimensions 5 Buckling Calculations 6 Buckling Force/ Graphs 7 Load Calculations 8 PBV Flow Chart
More informationDouble acting, cushioned, magnetic Ø mm
CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562
More informationISO Technical details
Cylinders > piston rod cylinders > assembly groups > BP IO 15552 Technical details Operating pressure Cylinder with brake system XBP brake system 3... 6 bar Temperature range -10 C... +50 C Max. stroke
More information/2017. Swing sink clamping element double-acting
Applications: integrated in press rams integrated in press beds in machine tools and equipment when the available space is limited when temperatures may reach 70 C For power units please see product group
More informationData Sheet for Linear Sensors
HEM12 internal flange HEM12 external flange Displacement sensor for hydraulic applications High degree of protection IP67 and max. 250 bar operating pressure With external magnetic drag - capsule of the
More informationAluminium profile. Double-acting, cushioned, magnetic ø mm
> Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic
More informationISO PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125
ISO 15552 PNEUMATIC CYLINDERS PAC-Y SERIES Ø32 - Ø125 PAC-Y GENERAL INFORMATION PAC-Y SERIES ISO 15552-32 - 125 CUSHIONING CYLINDER ELOXAL PLATE AND SPECIAL ROD SEAL PROVIDING HYGIENE AND LONG WORKING
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationProximity switches and switch brackets
Proximity switches and switch brackets MGE.0 - Proximity switches and switch brackets 5 7 SH /S (p. -) SH /U (p. -) SH /S, SH /ST (p. -) SH /S-H (p. -5) 9 SH /U (p. -) SH /U-H (p. -7) Proximity switch
More informationAngle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
More informationLPRA/182000/M Double acting profile cylinders Ø mm
Double acting profile cylinders 32... 125 mm High performance, stability and reliability M/50 switches (solid state) can be mounted flush with the profile Cylinders and mountings conform to ISO 15552 (ISO
More informationBore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2
6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6
More informationTube connection Ambient temperature range Medium temperature range. T min C +80. C T max. max. Weight (mass) kg See table
Cylinder Ø32-125 mm with blocking device Series DZB... Blocking reverse stroke Series DZBA... Blocking forward stroke Mountings to ISO 15552 (ISO 6431) Special versions: according to CETOP RP 53 P (Piston
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationPNEUMATIC SLIDES (SERIES ZA)
ZA PNEUMATIC SLIDES (SERIES ZA) Bore 2x6, 2x8, 2x12, 2x16 or 2x20 mm. Stroke from 10 mm to 150mm. Optional end of stroke adjustments using shock absorbers, rubber bumpers, (FGD) or grub screw, (FPD). Optional
More informationbar -30 C C ( C for high temperature version)
Technical details ylinders > piston rod cylinders > Mini cylinders ISO 6432, double acting Operating pressure Temperature range Medium 1... 10 bar -30... +80 ( 0... +150 for high temperature version) Filtered,
More informationPneumatic Power Clamps
15.61 Pneumatic Power Clamps Series 82M-6 Product Overview (last time in catalog) Features: modular design shielded body, dirt-resistant compact design high holding torques long life cycle low weight (aluminium
More informationDOUBLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod 3 Part Numbering System 4 Basic Dimensions 5 Load Calculations 6 Load Calculations 7 Buckling Calculations 8 Buckling Calculations
More informationStandard Norm Cylinder DIN 24554
Standard Norm Cylinder DIN 24554 Maximum operating pressure up to 160 bar Choice of 10 different piston sizes between 25 and 200mm with 2 different rod diameters and 4 different attachments each Rugged,
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More information1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
More information86P40-2, 86P60-2 Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information
86P40-, 86P60- Series Pneumatic Pin Clamps and Packages Features and Beneits, Ordering Information Application: Accurate positioning of sheet metal parts in welding equipment and handling systems. At the
More informationSingle and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»
More informationHydraulic cylinders Tie rod design. Type CD70 / CG70. Features. Contents
Hydraulic cylinders Tie rod design Type CD / CG Features types of mounting Piston Ø (ØAL)... mm Piston rod Ø (ØMM) 12... 1 mm Stroke length up to 3 m Project planning software Interactive Catalog System
More informationSingle and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm
CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationMGX. 2-jaw parallel self-centering pneumatic gripper series MGX. Parallel grippers. Pinze parallele MGX
Pinze parallele MGX Parallel grippers MGX 2-jaw parallel self-centering pneumatic gripper series MGX Flat profile. Robust guide. High gripping force. Small weight and dimensions. High dimensional accuracy.
More informationSeries Cylinders according to standard ISO 15552
Series 131-11 General This series of pneumatic cylinders is manufactured according to ISO 31 standards adapted to MA 2 and CNOMO/AFNOR 3 that guarantee the interchangeability of the cylinders even without
More informationP1Z Series. Magnetically Coupled Rodless Air Cylinders Contents
Magnetically Coupled Rodless Air Cylinders Contents Basic Version Features... 15 Ordering Information... 151 Specifications... 152 Technical Data... 153 Dimensions... 154 Mountings... 155 uided Version
More informationDirectional Seat Valve Series D4S (Denison)
Characteristics Seat valves series D4S are designed for directional control functions. A large variety of poppets, springs and covers - including shuttle valves, stroke limiters, solenoid valves (VV01)
More informationHydraulic cylinder Type CDL1
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RE 17 325/01.03 Replaces: 07.02 Hydraulic cylinder Type CDL1 Series
More information3.2 lean SL 5 Technical data & dimension sheets lean SL series Technical data
3.2.1 lean SL series Technical data 3.2 lean SL 5 Technical data & dimension sheets 3.2.1 lean SL series Technical data lean SL lean SL double! Make sure that the article number refers to the correct pinion
More informationNFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
More informationElectric Lifting Cylinder TV / KV 5 XE Load up to N
S+R S+R automation systems GmbH Electric Lifting Cylinder TV / KV 5 XE Load up to 6.500 N Lifting Moving Positioning Design and functuion An electric lifting cylinder is an electro-mechanical drive unit.
More informationTable of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
More informationMB14T SKIPLOADER Spare Parts Manual
MB14T SKIPLOADER Spare Parts Manual For spares and service support & the latest service network listings refer to www.edbro.com Spares Tel: +44 (0) 120 4902319 Spares fax: +44 (0) 120 4393561 Service Tel:
More informationPin Packages Section.Page. Series. Dimensions and technical information are subject to change without notice. Air Consumption at 5 bar [dm3]
Pin Packages 6. Pushing Force (N) at 5 bar Retracting Force at 5 bar Piston Diameter Weight Air Consumption at 5 bar [dm3] Application Area Series Section.Page 0 to 500 [N] 500 to 000 [N] 000 to 500 [N]
More informationLPRA/182000/M, ISO cylinder Magnetic piston, double acting
> > Ø 32... 125 mm > > High performance, stability and reliability > > M/50 switches can be mounted flush with the profile > > Cylinders and mountings conform to ISO 15552 (ISO 6431, VDM 24562 and NFE
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly
More informationAccessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves
Accessories for pneumatic stroke and rotary actuators CLASSIC and ELEMENT process valves Complete modular designed accessory program More for less - optimal configuration costs Easy maintenance and commissioning
More informationZU series. 100 bar universal cylinder. Determine your 100 bar universal cylinder:
ZU series 100 bar universal cylinder Piston Ø 10-100 mm Lengths of stroke at your option (take account of the bend resistance, see page 35) Standard lengths of stroke Round, compact design; black blued
More informationDouble-acting, magnetic, cushioned ø16, 25, 32, 40, 50, 63, 80
> Cylinders Series 50 CATALOGUE > Release 8.5 Rodless cylinders Series 50 Double-acting, magnetic, cushioned ø6, 25, 32, 40, 50, 63, 80»» Four ports on each chamber»» Possibility to supply both chambers
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationV160C. Mould Hydraulic Systems. Hydraulic cylinders-iso 6020/2 compact 160 bar V160C
V160C Mould Hydraulic Systems Hydraulic cylinders-iso 6020/2 compact 160 bar V160C V160Ccat.GB01-2006 Hydraulic cylinders-iso 1 2 Chrome-plated steel rod, hardened or tempered and polished. Thickness of
More informationP1Z Series Guided Version
Rodless Pneumatic ylinder Magnetically oupled orrosion resistant Guide carriage and endcaps in anodized aluminium Load fixing by 4 tapped holes onto the guide carriage ylinder mounting End cap with mounting
More informationISO/VDMA Series ISO 6431 and VDMA Cylinder Line ISO 6431 and VDMA Cylinder Line w w w. n u m a t i c s. c o m
ISO/VDMA Series ISO 6431 and VDMA 24562 Line Cylinder Line ISO 6431 andcylinder VDMA 24562 w w w. n u m a t i c s. c o m Table of Contents ISO/VDMA Series Features and Benefits 3 How to Order 4 Technical
More informationDescription. Piston rod end. Technical data. Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333
CE CV LE MM KF MM KK Datasheet Type 46 Single rod cylinder according to ISO 6022 / DIN 24333 Description - Standard cylinder to ISO 6022, DIN 24333 - Strokes up to 2000 mm - Piston diameter: 40 320 mm
More informationASP Series Steel Body NFPA Cylinder Line
Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8
More informationSizes 32, 40, 50 and 63
> Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary
More informationSingle-acting and double-acting, magnetic Series 94: ø 16, 20, 25 mm Series 95: ø 25 mm, cushioned
> Series 94 and 95 stainless steel cylinders CATALOGUE > Release 8.7 Series 94 and 95 stainless steel mini-cylinders Single-acting and double-acting, magnetic Series 94: ø 6, 20, 25 mm Series 95: ø 25
More informationSERIES HH WITH HYDRAULIC ROD LOCK
HH LOCK TAB HH Rod Lock HH Options SERIES HH WITH HYDRAULIC LOCK The TRD difference... TRD s floating rod bushing design and RL Series Rod Lock = OPTIMIZED RESULTS and SUPERIOR PERFORMANCE. For rod locks
More informationSeries ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders
Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from
More informationguide unit, double acting Technical details
Technical details Operating pressure Temperature range Operating speed Medium 1... 10 bar -20 C... +80 C 50... 500 mm/s iltered, oil-free and dried compressed air according to ISO 8573-1:2010, Class 7:2:4,
More informationWe have next programs: Resale of hydraulic components Production of hydraulic cylinders. What we can do for you?
We have next programs: Resale of hydraulic components Production of hydraulic cylinders What we can do for you? Resale of hydraulic components CHROMIUM PLATED BARS AND TUBES/PISTON RODS We offer various
More informationHYDRAULIC CYLINDER HYC
www.hydropa.de HYDRAULIC CYLINDER HYC www.hydropa.de INTRODUCTION The hydraulic cylinder, as a link between hydraulic control and the machine, is suitable for use in many areas of industry, such as pressing
More informationRA/192000/M. Compact cylinder ISO Magnetic piston, double acting Ø 20 to 125 mm
Compact cylinder ISO 2287 Magnetic piston, double acting Ø 20 to 25 mm Conforms to ISO 2287 M/50 switches can be mounted flush with the profile Magnetic piston as standard Seals ensure low friction operation
More informationMould Hydraulic Systems. Self-locking rod hydraulic cylinders 260 bar V260LK V260LK
Mould Hydraulic Systems Self-locking rod hydraulic cylinders 260 bar V260LK V260LK V260LKcat.GB01-2006 Self-locking rod hydraulic cylinders General Characteristics - Max. working pressure: up to 260 bar
More informationHFP Series. Specifications. Switch specifications. Wide parallel hand Double acting. Operational stroke length: 20, 30, 40, 60mm.
FH0 G B FH0 G A S F J H2 N/ S/F Specifications Size Cylinder bore size mm Actuation Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke
More informationClimax Pneumatics Cnomo NFE Cylinders
Climax Pneumatics Cnomo NFE 49001 Cylinders End Caps Tube Tie Rods Seals Piston Rod Diecast Aluminum Anodized Aluminum Zinc Coated or Stainless Steel Polyurethane Chromium Coated Steel Working Pressure
More informationTH23 POWER HOOK Spare Parts Manual
TH23 POWER HOOK Spare Parts Manual For spares and service support & the latest service network listings refer to www.edbro.com Spares Tel: +44 (0) 120 4902319 Spares fax: +44 (0) 120 4393561 Service Tel:
More informationSubsea and industrial hydraulic manufacturers
Cylinders C10 & Cepac Cylinders Operating Parameters Standard cylinders Working pressure External sea pressure - Cepac subsea cylinders Temperature range Hydraulic fluid Rod speed Rec filtration 250 bar
More informationHydraulic Block Cylinder HBZ 500
Hydraulic Block Cylinder HBZ 500 Maximum operating pressure up to 500 bar with smallest installation dimensions Choice of 12 different piston sizes and 21 differnt configurations Seal arrangement for easy
More information82L Series. Pneumatic Power Clamps Ordering Information 03 B8 H 82L 2G B PC-PPC-15. Base Model Size Description 2G 3G 3N 4G 4N
82L..-2... Series Pneumatic Power Clamps Ordering Information 82L 2G B -2 3 B8 H Base Size Description Arm Style Description 2G 3G 3N 4G 4N Ø25 (G1/8) Cylinder Bore Size Ø32 (G1/8) Cylinder Bore Size Ø32
More informationDME HYDRAULIC LOCKING CORE PULL CYLINDERS Specification No. ME-E (A) Part No. HLCP-PS02 Page 1 of 13
Specification No. ME-E32-0002(A) Part No. HLCP-PS02 Page 1 of 13 IMPORTANT SAFETY INFORMATION 1. To avoid injury, exercise caution by reading these instructions before servicing or operating the system.
More informationDHDB. Free pass possible!
Overview/Configuration/Ordering www.festo.co.kr/amiproduct Horizontal stopper cylinders Piston diameter 50 mm Stroke length 50 mm Lever return force 16N Double-acting Position sensing Flexible cushioning
More informationLarge Bore Extruded Cylinders, ISO 6431 Series 41
Large Bore Extruded Cylinders, ISO 6431 Series 41 Double-acting cushioned, magnetic ø160-200 (DIN/ISO 6431)»» DIN/ISO 6431 VDMA 24562»» Rolled stainless steel rod»» Adjustable cushioning Cylinders Series
More informationProfile Design Air Cylinder
Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More informationTemposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors MH-Series Model MB Mobile Hydraulic Sensor with Analog Output Data Sheet SENSORS Document Part Number 551284 Revision A MH-Series
More informationAccessories smart additions for efficiency and intelligent performance
smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.
More informationAngle Seat Valve 7010
Angle Seat Valve 7 N 8 up to N 8 PN 16 - PN 4 Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. ompact design Unaffected by lightly contaminated
More informationLRA/8000/M/EX, LRA/8000/EX, ISO cylinder Magnetic & Non-magnetic piston, double acting
> > Ø 32... 320 mm > > Comprehensive range for the utmost versatility > > Wide temperature range > > Supplied complete with piston rod locknut > > Conforms to ISO 15552 (ISO 6431, VDM 24562 and NFE 49-003-1)
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationAngle Seat Valve 7010
Angle Seat Valve 7 DN 8 up to DN 8 PN 16 - PN Pneumatically operated angle seat valve for the control of neutral, slightly aggressive and highly aggressive media. Compact design Unaffected by lightly contaminated
More informationTie rods cylinders to ISO standard
Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationPNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552
PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationPneumatic cylinders Compact cylinders Series P1J
Pneumatic cylinders Series P1J Catalogue 9127007282GB-ul Through mounting holes, tapped at both ends, for cylinder mounting. Return spring for single-acting variants. Stainless steel piston rod. Low-friction
More informationCPLab / CP Factory. Application module magazine. Data sheets
CPLab / CP Factory Application module magazine Data sheets Data sheet: Push-in fitting QSM-M5-4 #153304 Size Mini Nominal size 2.2 mm Type of seal on screw-in stud Sealing ring Container size 10 Design
More informationToll-free: 1 (844) MAGISTER
About Us.................................................... 2 Production................................................... 3 Quality Policy.................................................4 Quality Control................................................5
More informationISO/VDMA Series ISO 6431 and VDMA Cylinder Line
ISO/VDMA Series ISO 6431 and VDMA 24562 Cylinder Line www.asco.com Table of Contents ISO/VDMA Series Features and Benefits 2 How to Order 3 Technical Information 4 Dimensions Tie-Rod Version 5 Mounting
More informationChain lubrication, accessories Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication EN
Nozzles, oiling-brushes, reservoirs and other accessories for the chain lubrication 1-106-EN 16 10,5 16 10,5 ~ ~ Chain lubrication, accessories Oil projection nozzle AC-A Compact design, pinpoint accuracy,
More informationPRA/181000, PRA/181000/M PRA/183000, PRA/183000/M
PA/181000, PA/181000/M M/50 switches can be mounted flush with the profile Conforms to DIN ISO 6431 and VDMA 24562 part 1 Mountings conform to DIN ISO 6431, VDMA 24562 part 2 and NFE 49-003-1 Polyurethane
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationELECTRO HYDRAULIC THRUSTERS
ELECTRO HYDRAULIC THRUSTERS THE ORIGINAL. BE SAFE..moving ahead. DESIGN, FUNCTION AND ADVANTAGES LIFTING ROD HEAD OIL FILLING SEALING SYSTEM LIFTING ROD REGULATION PLUG VALVES BRAKE SPRING (C SPRING) 1)
More informationDB4 GUIDED SLIDE APPLICATIONS: ISO 9001 REGISTERED RETRACTABLE PINS & LOCATORS PUSHERS CROWDERS THRUSTERS SMALL LIFTERS SLIDES
ISO 9001 REGISTERED DB4 GUIDED SLIDE 1/4" NPT or G1/4 PORTS RAP OR RIGID COUPLER TOOL MOUNTING SURFACE WELKER 70mm BORE PNEUMATIC CYLINDER SOLID STATE CYLINDER SWITCH NAAMS STOPS OR WELKER SMART STOPS
More information