Double Column type CNC Vertical Turning Center VTB/VTC Series VTB(C)-2530E/3040E/4050E/5060E
|
|
- Beatrix Flowers
- 6 years ago
- Views:
Transcription
1 ouble Column type CNC Vertical Turning Center VTB/VTC Series VTB(C)-2530E/3040E/4050E/5060E
2 M C I E T L S VTB/VTC -2530E/3040E/4050E/5060E ouble Column type CNC Vertical Turning Center with Cross -rail Elevating NKOOK VTB VTC Series 2 igh Productivity Maximum 6000mm turning capacity 60 tons load capable table 150kW(200P) main drive motor power Elevating cross rail of 1500~2500mm stroke Fully controlled C-axis and rotary spindle igh Reliability eavy duty guide ways of box type Massive one-piece cast iron bed, column and cross rail Induction-hardened and precise-ground guide ways Extra large 300 and 400mm square spheroidal-graphite-iron ram ydrostatic table bearing(option) igh ccuracy Qualified precision bearings & ball screws Fluoroplastic-bonded & hand-scraped guide ways Full automatic lubrication to all critical areas Machining Range (X-XIS STROKE) BITE Ø430 (Ø570) E (W-XIS STROKE) ØB Ø (TBLE I) C F (Z-XIS STROKE) RM CENTER (MCINE CENTER) 300 ( 400) 65 RM ( ):4050E/5060E Minimum Boring B C E F Unit:mm VTB(C)-2530E VTB(C)-3040E VTB(C)-4050E VTB(C)-5060E / / / / / / / /
3 Super large CNC verticalvtb/vtcseries presents a new standard of double column type vertical turning center. NKOOK VTB VTC Series 3
4 M C I E T L S Bed/Table Cross-rail/Column MIN MOTOR TBLE C-XIS GER BOX BE GER BOX Cross-rail is accurate-sliding on the column guide-way by C servo motor and high precise ball screw and strong-fixed by hydraulic clamping device after positioning. It travels to the maximum 2500mm. Column has thick wall and rib structure of box-shape, so can be fully rigid to sustain torsion or bending generated during heavy-duty cutting. Saddle/Ram NKOOK VTB VTC Series 4 One-piece casting bed of box shape and rib structure safely support the load of large work-piece to the maximum 60 tons. Table is made of high quality casting, and the variously shaped work-piece can be clamped with 8T-slots and 8 independent manual slide jaws on the table. Table is supported on the high precision thrust cylindrical roller bearing and tapered roller bearing, and it fully stands heavy-duty cutting load with rigidity. Gear driven table by a large diameter helical gear connected with powerful main motor and v-belts, and the gears are changed at two-step(high & low) by hydraulic cylinder. Shafts and gears are made by special steel, and heat-treated, precise-ground, so those help the table in stable rotation even at high torque. On VTC model, C-axis drive unit is installed on bed, and it can index to the minimum 0.001degree, so various milling jobs are possible with this unit. Table Torque-Power iagram The saddle enclosing the ram is one-piece casting to keep the high rigidity. The ram of special cast iron is heat-treated and precise-ground. 300 and 400mm sized square ram can vertically travel to the1600 and 2000mm maximum. Ram head can equip tool holders of ISO 7/24 taper #50(BT50) standard and MS P50T-I pull stud. Each guide-way for feeding axis is lubricated and attached with Turcite for reduced wear and friction-resistance and to keep it in the most optimum condition. It is possible to face-mill, end-mill, drill or do other multiple milling jobs on VTC, so it increases productivity accompanied with intensive work progress and effective process. TORQUE(N m) VTB-2530E/3040E (Max.120r/min, Motor.60/75kW) N m N m N m N m TBLE SPEE(r/min) 75 kw 60 kw 30min Operating Zone Continues Operating Zone MOTOR POWER(kW) TORQUE(N m) VTB-4050E (Max.60r/min, Motor.130kW) N m (LOW) N m (IG) TBLE SPEE(r/min) MOTOR POWER(kW) TORQUE(N m) VTB-5060E (Max.50r/min, Motor.150kW) (LOW) N m 130 kw 150 kw N m (IG) TBLE SPEE(r/min) MOTOR POWER(kW)
5 Tool olders(option) Unit:mm Square tool holder (Standard type) Boring tool holder (BF type) 300(400) 260(330) Square tool holder (Through tool coolant) 300(400) Boring tool holder (B type) 260(330) NKOOK VTB VTC Series K Ø TE25(40) TE25(40) TE25(40) Ø TE25(40) TE25(40) TE25(40) TE25(40) Side lock holder TE25(40) TE25(40) TE25(40) Ø TE25(40) TE25(40) TE25(40) TE25(40) Ø80 Ø100 Ø Ø40 Ø50 Ø60 Ø80 5 Morse taper holder TE25(40) TE25(40) TE25(40) TE25(40) E Boring tool holder (BP type) Ø TE25(40) TE25(40) TE25(40) Ø80 Ø MT#5 MT#6 MT#7 Ø TE25(40) TE25(40) TE25(40) TE25(40) Note.( ):4050E/5060E
6 M C I E T L S Machine Specifications NKOOK VTB VTC Series 6 Capacity Table C-axis Tool ead Travel & Feed TC Motors Items Maximum swing Maximum turning diameter Maximum turning height Maximum load on table Table diameter Table speed Number of table speed range Cutting feed Maximum speed Tool size Spindle taper Section dimension of square ram Mill spindle speed X-axis travel(saddle cross) Z-axis travel(ram vertical) W-axis travel(cross rail vertical) X/Z-axis cutting feed-rate X/Z-axis rapid traverse W-axis rapid traverse Type of tool holder Number of tool Maximum tool weight Type of pull stud Table motor Mill spindle motor X-axis servo motor Z-axis servo motor C-axis servo motor W-axis servo motor Machine weight CNC system Unit kg(lbs) rpm step deg/min rpm - rpm mm/min mm/min(ipm) mm/min(ipm) - set kg(lbs) - kw(p) kw(p) kw(p) kw(p) kw(p) kw(p) kg(lbs) - VTB[VTC] VTB(C)-2530E VTB(C)-3040E 3000 (118.1) 4000 (157.5) 3000 (118.1) 4000 (157.5) 2000/2500 (78.7/98.4) 2000/2500 (78.7/98.4) 20,000 (44,100) 30,000 (66,140) 2500 (98.5) 3000 (118.1) 1~120 1~100 utomatic 2 [0~180] [0.5] ( 2) ISO 7/24 No ( ) [ ] 1835 (72.2) 2335 (92.0) 1600 (63.0) 1500/2000 (59.1/78.7) Max (315) 500 (19.7) MS BT50 VTB : 12 tools, VTC : 24 tools 90 (198) P50T-I C 60/75 (80/100) [C 22/26 (25/30)] C 9 (12) C 9 (12) [C 9 (12)] C 7 (9.5) 90,000 (198,400) 95,000 (209,500) FNUC 31i- Standard ccessories CNC controller, FNUC 31i- C table and servo drives and motors eavy duty 4-jaw independent chuck utomatic tool changer system (VTB:Turning 12-tool, VTC:Turning 12, Milling 12-tool) Table gears & bearings oil cooling unit C-axis scale(vtc only) ydraulic power unit utomatic lubrication system for guides Coolant system Splash guard X-axis telescopic steel cover Work light Patrol lamp(red, Yellow, Green) Levelling block Foundation bolt & nut Operating tool box & tool kits Optional ccessories Through spindle coolant Chip conveyor & bucket NC power off Transformer Tool setter Tool holders Scale feedback(x/z/w)
7 VTB[VTC] VTB(C)-4050E VTB(C)-5060E 5000 (196.9) 6000 (236.2) 5000 (196.9) 6000 (236.2) 2500/3000 (98.4/118.1) 2500/3000 (98.4/118.1) 50,000 (110,230) 60,000 (132,280) 4000 (157.5) 5000 (196.9) 1~60 1~50 utomatic 2 [0~120] [0.333] ( 2) ISO 7/24 No ( ) [ ] 3745 (147.4) 4245 (167.1) 2000 (78.7) 2000/2500 (78.7/98.4) Max (236) 500 (19.7) MS BT50 VTB : 12 tools, VTC : 24 tools 110 (243) P50T-I C 130 (175) C 150 (200) [C 37/45 (50/60)] C 14 (19) C 14 (19) [C 16 (21)] C 14 (19) 220,000 (485,000) 250,000 (551,000) FNUC 31i- Standard CNC Control Features FNUC 31i- Control Features: Simultaneously controllable axes: 2 Minimum programmable increment: 0.001mm( ) Tape storage length: 640m(2099feet) Registerable programs: 1000E Backlash compensation Pitch error compensation Constant surface speed control Self diagnostic functions Programming Features: Graphic display ynamic graphic display(without manual Guide-i) Circular interpolation by radius designation Tool nose radius compensation (G40-G42) Combined use of absolute/incremental command Chamfering, corner R Canned cycles (G90, G92, G94) ecimal point programming Reference point return (G27-G30) Sub-program10 holds nested Custom macro B Multiple repetitive cycles (G70-G76) Multiple repetitive cycleⅡ Custom macro additional variable (#500-#999) Operation Features: 10.4 TFT LC Incremental encoder Geometry and wear offsets 32 pairs of tool offsets Run hour display Thread cutting retract Input/output interface (RS232C) Keyboard type manual data input(mi full key) Program protect key Incremental offset Rapid traverse override Feed rate override Spindle speed override Tape code: EI, ISO automatic recognition NKOOK VTB VTC Series GUR RIL RM Z-XIS SERVO MOTOR OPERTION PNEL B CIP CONVEYOR TC MGZINE SPLS GUR F.L TBLE 7 External imensions 1010 E C-XIS GER BOX C Model B C VTB-2530E (W stroke 1500/2000) VTB-3040E (W stroke 1500/2000) VTB-4050E (W stroke 2000/2500) VTB-5060E (W stroke 2000/2500) / / / / Unit : mm E
8 NV Certification, Ltd. E OFFICE & PLNT NKOOK MCINE TOOLS CO., LT. 52, Ungnam-dong, Seongsan-gu, Changwon-si, Gyeongsangnam-do, Korea. TEL: /7660 FX: sales@hanmachine.com MERIC OFFICE ankook merica, Corp tlantic rive-#109 West Chicago, IL60185 U.S. TEL: FX: hankookamerica@msn.com EUROPE OFFICE ankook Machine Germany Gmb Schwalbacher Str Eschborn/Germany TEL: FX: info@hanmachine.de Room 1010, Block B, Guangshun South Street, East-isa Wangjing Center Building, Chaoyang istrict, Beijing, China. TEL: FX: wmh722@163.com Room 11p07,Shanghai Mart, No.2299 West Yanan Rd. Shanghai, China. TEL: (Ext806) FX: lgkim@126.com JPN OFFICE Maruei Nishihonmachi Bldg 3F, , waza, Nishi-ku, Osaka-shi TEL: FX: hjkang@hanmachine.com SINGPORE OFFICE ankook Singapore Pte. Ltd. Blk 1013 Geylang East ve 3# Singapore TEL: FX: hanmachine@singnet.com.sg Note: Specifications and features are subject to change without prior notice. TE30-C06E Printed in Korea
U1000 U1000 SUPER RT1000 CNC BED TYPE MILLING MACHINE CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE
U1000 U1000 SUPER CNC BED TYPE MILLING MACHINE RT1000 CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE U1000 CNC Bed Type Milling Machine Machine Specification U1000 Surface 2500 / 3100 / 3600 900(1050)mm
More informationHigh Productivity Vertical Machining Center
High Productivity Vertical Machining Center VC 430 / VC 510 is designed for high-speed and superior precision machining in a production environment. VC430/ VC510's powerful drives, heavy cutting, column-moving,
More informationVERTICAL MACHINING CENTER
VERTICAL MACHINING CENTER Vertical Machining Center Rigid Construction for Heavy Duty Cutting Capability High-power and heavy duty cutting main spindle (4,500rpm/8,000rpm) 4 ways, 8 surfaces restraint
More informationMVP Series Moving Cross Rail Bridge Type 5-Face Machining Center
MVP Series Moving Cross Rail ridge Type 5-Face Machining Center WE MECHNTRONIC CO., LTD. HEDQURTERS 30512 No.629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Xinpu, Hsinchu, Taiwan TEL : +886-3-588-5191
More informationHigh Performance Vertical Turning Center
High Performance Vertical Turning Center The vertical turning center is designed for long term accuracy, heavy duty cutting and to minimize floor space. Its powerful spindle drives, meehanite casting and
More informationVictorTaichung. Art of Smooth Performance. Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel
R VictorTaichung Art of Smooth Performance Servo turret One-piece slant bed Box slideways High thrust force High Rapid feeds Rotary operation panel Victor Taichung an established ISO 91 & 141 company Smooth
More informationVCF 850 series. Multi-purpose machining center VCF 850 VCF 850SR VCF 850L VCF 850LSR
VCF 85 series Multi-purpose machining center VCF 85 series VCF 85 VCF 85SR VCF 85L VCF 85LSR VCF 85 series Multi purpose moving column vertical machining center, providing a 3m long machining area and
More informationCNC Vertical Machining Centers
CNC Vertical Machining Centers The Best Valued VMC in the Market Today... Take a Minute and Compare Whatever the requirement there is a Storm VMC for Every Application Storm CNC Vertical Machining Centers
More informationHORIZONTAL MACHINING CENTER
HORIZONTAL MACHINING CENTER Horizontal Machining Center High-productivity & performance Horizontal Machining Center Linear Roller Guide at each axes 2 steps gear driven type for the heavy duty cutting
More informationLynx 300 series. Lynx 300 series. 10-inch High Productivity Turning Center. Lynx 300 Lynx 300M. ver. EN SU
Lynx 0 series 10-inch High Productivity Turning Center Lynx 0 series Lynx 0 Lynx 0M ver. EN 160502 SU Product Overview Basic information Structure Main Components Detailed Information Standard/Option Applications
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationSL 2500/3000 series CNC TURNING CENTER
본사및공장 SMEC Co., Ltd. 157-10, Goldenroot-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, Korea Tel +82 55 3 4800 Fax +82 55 3 47 http://www.esmec.com Design and specifications subject to change without notice.
More informationMTAB. MACHINING CENTERS
MTAB www.mtabcnc.com MACHINING CENTERS OVERVIEW MTAB's Vertical Machining Center is designed to flex with the customers' manufacturing demands and requirements. The machines are high performance systems,
More informationMB SERIES High Precision Horizontal Boring Mills
MACHINING CENTERS by MACHINING CENTERS by YAMA SEIKI USA, INC. 5788 Schaefer Ave., Chino, CA 91710 TEL : ( 909 ) 628-5568 ( 888 ) 976-6789 FAX : ( 909 ) 628-5556 Web : www.yamaseiki.com E-mail : info@yamaseiki.com
More informationHEAVY DUTY CNC TURNING CENTER SKT400/400M SKT400C/400LC/LMC
HEAVY DUTY CNC TURNING CENTER SKT400/400M SKT400C/400LC/LMC CNC Turning Center World Top Class Quality HYUNDAI-KIA Machine High Speed, High Accuracy, High Rigidity mm(in) rpm mm(in) kw(hp) 780 ( 30.7 )
More informationSERIES DL SERIES. High Performance Double Column Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Double Column Milling
DL SERIES Double Column Milling EXCELLENT TRUSTWORTHY ON AND ON YIH CHUAN MACHINERY INDUSTRY CO., LTD 40755 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +886-4-2359-3351 FAX : +886-4-2359-0012
More informationThe Storm Range Vertical Machining Centres
www.colchester-harrison.com The Storm Range Vertical Machining Centres Heavy cast iron base, saddle and table minimise vibration during heavy cutting. 40mm pre-tensioned ballscrews, directly coupled to
More informationPL 250V(VM) VERTICAL TURNING CENTER
VERTICAL TURNING CENTER MACHINE CNSTRUCTIN / FEATURES BED The main spindle body of PL250V is consisted of one piece meehanite cast Iron bed, wide column, anti heat displacement spindle and head stock.
More information3. (06. 07) VERTICAL MACHINING CENTER
3. (06. 07) VERTICAL MACHINING CENTER World Top Class Quality HYUNDAI-KIA Machine Super Productive Vertical Machining Center Vertical Machining Center For High Precision, High Speed and High Productivity
More informationHigh Productivity, High Quality Tapping Center
High Productivity, High Quality Tapping Center High-Speed Tapping Center Featuring High Productivity and Quality The T 4000 and T 4000L deliver excellent productivity compared with competing models with
More informationHIT-400 / 400L / 360D. High Rigid Tapping & Drilling Center
HIT-400 / 400L / 360D High Rigid Tapping & Drilling Center 2 HWACHEON CATALOG 1 Auto Mobile Transmission Cover High-speed Tapping Center : HIT series 3 PRODUCTIVE RIGID TAPPING & DRILLING CENTER Tapping
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationBARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range
More informationTrust And Reliability. Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD.
Trust And Reliability Roller Guide System V33/V43 VERTICAL MACHINING CENTER LONG CHANG MACHINERY CO., LTD. V33/V43 FEED SYSTEM Heavy duty linear ways are imported from Germany, which are well balanced,
More informationMB SERIES High Precision Horizontal Boring Mills
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationJTEKT Toyoda Americas Corporation
JTEKT Toyoda Americas Corporation 316 W. University Drive, Arlington Heights, IL 60004 Toll Free: 800-257-2985 Main: 847-253-0340 Fax: 847-253-0540 www.toyoda.com JTEKT Toyoda Americas Corporation Designed
More informationExtra-Large Horizontal Turning Center 32 Chucker with Y-Axis
Extra-Large Horizontal Turning Center 32 Chucker with Y-Axis 2 HWACHEON CATALOG : Hi-TECH 850 1 1 Horizontal Turning Center 3 EXTRA-LARGE HORIZONTAL TURNING CENTER 32 CHUCKER The horizontal turning center
More informationExtra-Large Horizontal Turning Center 32 Chucker with Y-Axis
Extra-Large Horizontal Turning Center 32 Chucker with Y-Axis 2 Hwacheon catalog : Hi-TECH 850 1 1 Horizontal Turning Center 3 EXTRA-LARGE HORIZONTAL TURNING CENTER 32 CHUCKER The horizontal turning center
More informationMSeries. High Rigidity Vertical Machining Centers
MSeries High Rigidity Vertical Machining Centers M Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
More informationPL 800V VERTICAL TURNING CENTER
PL 800V VERTICAL TURNING CENTER MACHINE CNSTRUCTIN / FEATURES BED The main spindle body of PL800V is consisted of one piece meehanite cast Iron bed, wide column, anti heat displacement spindle and head
More informationVturn-NP16. VictorTaichung. New & Narrow Lathe with High Performance. Art of recision & erformance
R VictorTaichung Art of recision & erformance Vturn-NP6 New & Narrow Lathe with High Performance Machine width.5 meters Turning length 50 mm Rapid feeds 30/30 m/min Roller guideways Servo turret One-piece
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationBARON-MAX VB Series Vertical Machining Centers
BARON-MAX VB Series Vertical Machining Centers Heavy Duty Performance The Baron Max VB series offers versatility and value. Ideal for production and job shop applications, the rugged construction allow
More informationVERTICAL TURNING CENTER SKT-V3R/L SKT-V5R/L
VERTICAL TURNING CENTER SKT-V3R/L SKT-V5R/L Vertical Turning Center World Top Class Quality 620mm ( 24.41) 24m/min 3,000rpm 18.5/15kW (25/20HP) 8EA [12EA] 800mm ( 31.5) 20m/min 2,000rpm 22/18.5kW (30/25)
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
More informationBT50 AWEA MECHANTRONIC CO., LTD.
Dimensions Table Dimensions Boring Concentricity 0.025 mm / 1,500 mm 700 700 1,600 A 0.025 1500 0.030 A 1,800 T T-slot 型槽尺寸圖 Dimensions A 100 7x @ 200 = 1,400 "A" 45 22 H9 16 + 2 16 37+3 1.5 Tool Shank
More informationCopyright EXTRON All rights reserved E-M-EN EXTRONCNC.com
YIH CHUAN MACHINERY INDUSTRY CO., LTD HEADQUARTERS 40755 No.8, 9 Rd., Taichung Industrial Park, Taichung, Taiwan T e l : +886-4-2359-3351 Fa x : +886-4-2359-0012 E-mail : extron@extroncnc.com th YIH CHUAN
More informationAWEA MECHANTRONIC CO., LTD. AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationMoving Cross-Rail Double Columns Machining Center
Quality, Credibility, Innovation, Service Moving Cross-Rail Double Columns Machining Center 5 Face milling head 5 Axis Simultaneous milling head ( 000~000mm ) 5A head machining TEL : +886-4-565-98 FAX
More informationMCV 400/500 VERTICAL MACHINING CENTER
본사및공장 SMEC Co., Ltd. 157-10, Goldenroot-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, Korea Tel +82 55 340 4800 Fax +82 55 340 4740 http://www.esmec.com Design and specifications subject to change without
More informationCNC gantry-type machining center. PSD-Mill CNC
gantry-type machining center PS-Mill T e c h n i c a l a t a s h e e t xtremely robust and solid base frame provides great rigidity, stability and vibration-free work even with heavy duty cutting Rigid
More informationLCV 550/650 VERTICAL MACHINING CENTER
SMEC Co., Ltd. 157-10, Goldenroot-ro, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, Korea Tel +82 55 340 4800 Fax +82 55 340 4740 http://www.esmec.com Design and specifications subject to change without notice.
More informationMEGA5 Series Bridge Type 5-Axis Machining Centers
Series ridge Type 5-xis Machining enters WE MEHNTRONI O., LT. HEQURTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FX : +886-3-588-5194 Website :
More informationHorizontal Turning Center Box Way, Gear Box, Chuck
Horizontal Turning Center Box Way, Gear Box, 10-15 Chuck 2 HWACHEON CATALOG : Hi-TECH 450 1 1 Horizontal Turning Center 3 HORIZONTAL TURNING CENTER BOX WAY, GEAR BOX, 10-15 CHUCK Box way, Gear Box, 10-15
More informationMULTITURRET BAR TURNING B436Y2
MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model
More informationHigh Rigid CNC Lathe
High Rigid CNC Lathe Machine specifications Machine specifications Capacity pindle Turret Feed Tail stock Coolant ETC. Items wing over bed Max. turning dia td. turning dia Max. turning length Chuck size
More informationVT / 650. Vertical Turning Center Chuck with Quick Turret Type
VT - 450 / 650 Vertical Turning Center 12-24 Chuck with Quick Turret Type 2 HWACHEON CATALOG : VT-450 / 650 1 1 Vertical Turning Center 3 VERTICAL TURNING CENTER 12"-24 CHUCKER QUICK TURRET TYPE 12 24
More informationMILLING Bridgeport GX 1000 Machining Center
MILLING Bridgeport GX 1000 Machining Center Quotation to: Quotation Number: Contact: Address: ABMNameAlpha SOHDocumentOrderInvoice Contact Name ShipToAddressLine1 ShipToAddressLine2 ShipToAddressLine3
More informationCNC COMPOSITE PROCESSING MACHINE
SHENG HUI CNC COMPOSITE PROCESSING MACHINE ShengHu i V T M Series Composite Processing Machine T h e p er f ec t c o m b i n at i o n of m i l l i n g m ac h i n e an d ver t i c al l at h e Th e ve r
More informationGMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
More informationGTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER
GTH-2600 SERIES PARALLEL TWIN-SPINDLE CNC TURNING CENTER PARALLEL TWIN-SPINDLE CNC TURNING CENTER With leading technology and high quality components, the GTH series is particularly developed for automobile
More informationVMC-7833B Quotation
VMC-7833B Quotation HIGH PEFORMANCE VERTICAL MACHINING CENTER MACHINE FEATURES: Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and
More informationThe Industry Standard. Machines shown with optional equipment. H Series Double-Column Machining Centers
The Industry Standard Machines shown with optional equipment +1.844.302.3792 H Series Double-Column Machining Centers Outstanding Surface Finish, Precision, and Throughput H10 H12 H16 2 Machines shown
More informationBNA42MSY Fixed Headstock Type CNC Automatic Lathe
BNA42MSY Fixed Headstock Type CNC Automatic Lathe 2 BNA-42MSY Citizen MSY With two spindles, the subspindle having an additional X axis, a Y axis turret and the latest Mitsubishi control, the BNA-42MSY
More informationHBM-4 CNC Horizontal Borer
HBM-4 CNC Horizontal Borer August 27 CNC Horizontal ROTARY TABLE Heavy loading capacity Auger chip remover High accuracy: 3 pieces flat type clutch for position index provides high accuracy & long durability.
More informationHIGH EFFICIENCY VERTICAL MACHINING CENTER
HIGH EFFICIENCY VERTICAL MACHINING CENTER 1 HIGH EFFICIENCY VERTICAL MACHINING CENTER FACE MILL S45C Steel Material Removal Rate 138cc/min. EV1020A is built with state-of-the-art technology in mind and
More informationVP-1100/1500 Vertical Machining Center
VP-Series VP-10/1500 Vertical Machining Center http://www.twinhorn.com.tw RIGID CONSTRUCTION INNOVATIVE DESIGN SUPERIOR PRODUCTIVITY All major parts are built with high tensile Meehanite cast iron, featuring
More informationGTZ-2000 SERIES. Multi-tasking Turning Centers
GTZ-2000 SERIES Multi-tasking Turning Centers Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More information5-AXIS VERTICAL MACHINING CENTER
5-AXIS VERTICAL MACHINING CENTER 5-AXIS VERTICAL MACHINING CENTER In 2002, Kitamura Machinery Co., Ltd. developed a 5-Axis Vertical Machining Center Mytrunnion which guaranteed the unexplored realm of
More informationseries PUMA VTR1216 series Large RAM-type Vertical Turning Center PUMA VTR1216 PUMA VTR1216M ver. EN SU
PUMA VTR1216 Large RAM-type Vertical Turning Center PUMA VTR1216 PUMA VTR1216 PUMA VTR1216M ver. EN 170720 SU Product Overview Basic Information Basic Structure Detailed Information Options Applications
More informationseries PUMA V8300 series High Productivity 15" Vertical Turning Center PUMA V8300 PUMA V8300M PUMA V8300-2SP PUMA V8300M-2SP ver.
High Productivity 15" Vertical Turning Center M -2SP M-2SP ver. EN 161108 SU Product Overview Basic Information Performance Detailed Information Options Applications Diagrams Specifications Customer Support
More informationGTZ SERIES. Multi-tasking Turning Centers
GTZ SERIES Multi-tasking Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining requirements
More informationBARON-MAX VL Range Vertical Machining Centers
BARON-MAX VL Range Vertical Machining Centers Linear Guide ways VL Range Higher Efficiency, Rigid Structure, Excellent and Stable Accuracy At a Very Affordable Pricing Cost Effective, High Performance
More informationMILLING Bridgeport GX 300 Machining Center
MILLING Bridgeport GX 300 Machining Center Quotation to: Quotation Number: Contact: Address: ABMNameAlpha SOHDocumentOrderInvoice Contact Name ShipToAddressLine1 ShipToAddressLine4 ShipToCity1, ShipToState,
More informationPERFORMANCE : VALUE PRODUCT CATALOG
PERFORMANCE : VALUE by P a r t n e r s i n P r o d u c t i v i t y PRODUCT CATALOG PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools
More informationDouble Column Machining Center VM3018A With FANUC 0i MF LINEAR GUIDE WAY ON ALL THREE AXIS
Offer date:2017/2/8 Quotation No.VM3018AFMF20170208A Double Column Machining Center VM3018A With FANUC 0i MF LINEAR GUIDE WAY ON ALL THREE AXIS Stock Machine for Index: A.) General Machine Description
More informationAF SERIES AWEA MECHANTRONIC CO., LTD. High Performance Vertical Machining Center AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu, Taiwan TEL : +886-3-88-191 FAX : +886-3-88-194 Website : www.awea.com CENTRAL TAIWAN SCIENCE PARK
More informationWorld-wide sales and service. JONES & SHIPMAN TECHMASTER EASY Touchscreen Controlled, Heavy duty Surface and Profile Grinders GRINDING
634Easy Easy General capacities Maximum grinding length x width Maximum wheelhead movement Maximum table load (Including chuck, if used) Standard magnetic chuck size 250 kg 800 x 390 mm 500 kg 800 x Distance
More informationVMC-95/116 VERTICAL MACHINING CENTER
VMC-95/116 VERTICAL MACHINING CENTER VMC-95/116 VERTICAL MACHINING CENTER All three axes have a hardened box-way design. In addition, the spindle headstock, column, saddle, base, and table are all made
More informationFEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES
FEATURES of CYLINDRICAL GRINDER CNC UNIVERSAL SERIES The Supertec GU CNC series are designed for grinding complex workpieces in small and large batch productions as well as individual parts. It is built
More informationSouthwestern Industries, Inc. TRAK TRL 2460SX Lathe with the ProtoTRAK SLX CNC. TRAK TRL 2460SX Machine Specifications
Southwestern Industries, Inc. TRAK TRL 2460SX Lathe with the ProtoTRAK SLX CNC TRAK TRL 2460SX Machine Specifications Height of Centers- 12 Distance between centers- 60 Swing over bed 24 Swing over saddle
More informationSERIES M SERIES. High Rigidity Vertical Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Vertical Machining Center
M SERIES Vertical Machining enter EXELLENT TRUSTWORTHY ON AND ON YIH HUAN MAHINERY INDUSTRY O., LTD 407 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +88-4-239-331 FAX : +88-4-239-00 Web
More informationVMC-4220B Quotation
VMC-4220B Quotation HIGH PERFORMANCE VERTICAL MACHINING CENTER MACHINE FEATURES: Constructed with high quality meehanite cast iron and heat treated to relieve stress thereby assuring maximum rigidity and
More informationAccurate Precision Machining R12/16/20 CNC VERTICAL LATHE ISO 9001
Accurate Precision Machining R12/16/20 CNC VERTICA ATHE ISO 9001 ABOUT RADAR Radar Industrial Co., td., established in 2007, has more than 50 years of experience in manufacturing professional machine tools
More informationwe cut faster Vertical Machining Center MV204II series
we cut faster Vertical Machining Center MV24II series From : October 24 we cut faster Maximum capacity and performance in a very compact working envelope 1 OUTLING MV24II series P & PD models FANUC 18iM-B
More informationPUMA TT2500 series. series. Multi-Axis Turning Center PUMA TT2500S PUMA TT2500MS PUMA TT2500SY. ver. EN SU
PUMA TT2500 series Multi-Axis Turning Center PUMA TT2500 series PUMA TT2500S PUMA TT2500MS PUMA TT2500SY ver. EN 160715 SU 2 Multi-axis turning center combines Y-axis function, two spindles and upper &lower
More informationGTX Multi-tasking Turning Centers SERIES
GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationBNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA
BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,
More informationLSeries. High Speed Vertical Machining Center
LSeries High Speed Vertical Machining Center L Series With 40 years experience of manufacturing machine tools, EXTRON has continuously developed and provided creative machine tools for global customers.
More informationDUGARD. DUGARD Machine. Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre. Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Model V20/5 is a
More information5-Axis & 5-Face High Speed Machining Center
TM TM 5-Axis & 5-Face High Speed Machining Center BUFFALO MACHINERY CO., LTD. 5, Lane 31, Der Sheng Road, Ta Ya, Taichung City, Taiwan, R.O.C. P.O. Box 32, Ta Ya, Taichung City, Taiwan R.O.C. Tel: -4-37
More informationGTS SERIES. Twin Spindles & Turrets CNC Turning Centers
GTS SERIES Twin Spindles & Turrets CNC Turning Centers GTS series GTS series Twin Turrets TWIN SPINDLES & TURRETS CNC TURNING CENTER General Features Accessories & Applications Designed for simultaneous
More informationJONES & SHIPMAN PROGRIND EASY Touchscreen Controlled High Precision, High Productivity, Surface Grinders
GRINDING JONES & SHIPMAN PROGRIND EASY Touchscreen Controlled High Precision, High Productivity, Surface Grinders www.jonesshipman.com Heavy duty, high precison, surface grinding machines PROGRIND 1045
More informationBORING AND MILLING CENTERS
BORING AND MILLING CENTERS SPEEDMAT HP product range consists of five basic models with pallet size from 1250 x 1250 mm to 2000 x 2500 mm and maximum workpiece swing diameter from 3000 mm to 4600 mm. Four
More informationSD/SW SERIES Maximum Performance SWISS Turning Centers
D/W ERIE Maximum Performance WI Turning Centers Advantage D eries W eries MAXIMUM PERFRMANCE WI TURNING CENTER With leading technology and high quality components. Goodway wiss Turning Center provides
More informationSouthwestern Industries, Inc. DPM SX5P Bed Mill Specifications with the ProtoTRAK SMX3 Control
Southwestern Industries, Inc. DPM SX5P Bed Mill Specifications with the ProtoTRAK SMX3 Control Machine Specifications Table Size 50 x 12 T-Slots (number x width x pitch) - 3 x.63" x 2.52" Travel (X, Y,
More informationseries PUMA V8300 series High Productivity 15" Vertical Turning Center PUMA V8300 PUMA V8300M PUMA V8300-2SP PUMA V8300M-2SP ver.
High Productivity 15" Vertical Turning Center M -2SP M-2SP ver. EN 171011 SU Product Overview Basic Information Performance Detailed Information Options Applications Diagrams Specifications Customer Support
More informationVMC-127H VERTICAL MACHINING CENTER
VMC-127H HIGH-SPEED & HIGH-ACCURACY VERTICAL MACHINING CENTER VMC-127H VERTICAL MACHINING CENTER Most Suitable for Needing High Speed, High Cutting Rate, High Rigidity Mold Making Industry X & Y axes has
More informationHIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER
HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER Micro-drill HIGH SPEED HIGH PERFORMANCE MACHINING VERTICAL CENTER The YEONG CHIN FV-Series High-Speed, High-Power Vertical Machining Centers are specially
More information5-Axis & 5-Face High Speed Machining Center TM TM
TM TM 5-Axis & 5-Face High Speed Machining Center Aug. 212 V2/5 odel V2/5 is a high speed machining center which is equipped with 5-axis or 5-face milling capability. The machine is perfect for a wide
More informationYIH CHUAN MACHINERY INDUSTRY CO., LTD No.8, 9th Rd., Taichung Industrial Park, Taichung, Taiwan :
YIH CHUAN MACHINERY INDUSTRY CO., LTD Headquarters 40755 No.8, 9th Rd., Taichung Industrial Park, Taichung, Taiwan : +886-4-2359-3351 TEL FAX : +886-4-2359-0012 E-mail : extron@extroncnc.com www.extroncnc.com
More informationMILLING MACHINES 30 / 40 / 50. A wide range of models to select from light to heavy duty models
Since 1977 MILLING MACHINES A wide range of models to select from light to heavy duty models SHIAN RONG JING JI CO., LTD. No. 95, Ln. 61, Dafu Rd., Shengang Dist.,Taichung City 429, Taiwan. TEL: 886-4-2523
More informationCompany Profile. Continuous Innovation!! Global Market Net. Global market covers 5 continents More than 30 nations. Prompt Delivery.
Company Profile High Value High Quality Prompt Delivery Continuous Innovation!! EXTRON is a worldwide brand for Yih Chuan Machinery Industry Co., Ltd. It was founded in 1972, in Taiwan, specialized in
More informationCenters. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine
BARON-MA AX VL Range Vertical Machining Centers Linear Guide ways VL Rangee Powerful Machines, Simple User Friendly Programming Att a Very Affordable Pricing Cost Effective, High Performance Vertical Machining
More informationDouble Column Vertical Machining Centers
Double Column Vertical Machining Centers Double Column Vertical Machining Centers www.toyoda.com Your local distributor is: Corporate Headquarters 316 West University Drive Arlington Heights, IL 60004
More informationBT-380 Quotation. BT-380 Quotation
BT-380 Quotation HIGH PEFORMANCE MICRO MACHINING CENTER MACHINE FEATURES: LM guideways on all 3 axes greatly upgrades stability and dampening capability. Automatic lubrication unit with intelligent pressure
More informationHeavy Duty Vertical Machining Center
Heavy Duty Vertical Machining Center Heavy Duty Vertical Machining Center High Productivity Large Capacity Easy Operation The Mynx series is designed to offer exceptionally high rigidity and powerful spindles
More informationWherever you are there is a qualified service engineer available to meet your service needs.
Amera-Seiki service is begins with its nationwide chain of dealers, factory trained and well educated in its machine tools. As well, Amera Seiki fields a full complement of factory direct engineers covering
More informationYCM NH450A MAIN FEATURES
YCM NH450A MAIN FEATURES POWERFUL 15,000 RPM 30HP (BIG-PLUS SPINDLE) BBT-40 TAPER SPINDLE DELIVERS 148FT/LBS [200NM] OF TORQUE, WITH 430PSI THROUGH SPINDLE COOLANT SYSTEM MICRO OIL-AIR LUBRICATION FOR
More informationJONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders
GRINDING JONES & SHIPMAN ULTRAMAT Touchscreen controlled, `Easy` or full CNC, Universal Cylindrical Grinders www.jonesshipman.com Touchscreen controlled Easy or full CNC cylindrical grinding machines ULTRAM
More information