World-wide sales and service. JONES & SHIPMAN TECHMASTER EASY Touchscreen Controlled, Heavy duty Surface and Profile Grinders GRINDING

Transcription

1 634Easy Easy General capacities Maximum grinding length x width Maximum wheelhead movement Maximum table load (Including chuck, if used) Standard magnetic chuck size 250 kg 800 x 390 mm 500 kg 800 x Distance between table and grinding wheel (new wheel) Size of grinding wheel: Maximum Speed of grinding wheel - 50Hz motor Speed of grinding wheel - 60Hz motor motor 3,7 kw (5,5 kw Option) 355 mm 5,5 kw Table Working surface Maximum longitudinal traverse, Manual/Hydraulic Traverse speed range (per minute) Traverse per revolution of handwheel 710 / 650 mm 800 x 960 / 920 mm Crossfeed Total cross traverse Automatic feed, least programmable increment Automatic feed rate (per minute) Sparkout under wheel Crossfeed control Feedback 0,0001-0, Wheelfeed Automatic two rate: Maximum increment programmable Downfeed control Feedback (Linear scale) Data Transfer Protocol Dimensions Machine weight, (approx.) Shipping dimensions 2800 kg 10,42 m kg 14 m3 World-wide sales and service Through our Group Companies and an established network of distribution Jones & Shipman guarantee competent advice and support in evaluating, purchasing and using high-quality cylindrical, surface and creepfeed grinding systems. Sales and service: Jones & Shipman Hardinge Limited Murrayfield Road, Leicester LE3 1UW, England +44 (0) (0) Jones & Shipman S.A.R.L. Zone Activillage, 8 allée des Ginkgos, B.P. 112, BRON Cedex, France +33 (0) (0) * (Heidenhain Absolute Linear Scale option) Heiligkreuzstrasse St.Gallen / Switzerland +41 (0) (0) info@kellenberger.net Längfeldweg Biel-Bienne 8 / Switzerland +41 (0) (0) Sales and service in USA & Canada: Hardinge Inc. One Hardinge Drive P.O. Box 1507 Elmira, New York USA +1 (607) (607) info@kellenberger.com JONES & SHIPMAN TECHMASTER EASY Touchscreen Controlled, Heavy duty Surface and Profile Grinders Specification GRINDING Sales and service for China: Hardinge China Ltd. No.1388 Kangqiao Rd (East), Shanghai, China Service: Sales: ext Usach Technologies Inc Davis Road Elgin, IL USA +1 (847) (847) info@usach.com Your nearest Jones & Shipman Partner: capacity 634 ABCDEFG- 25 mm 404 mm 150 mm 27 mm 567 mm 200 mm Base plan 634 A2980 mm B954 mm C744 mm D500 mm E1740 mm F2118 mm G2630 mm Machine height (both models) mm 2245 mm 744 mm 500 mm 2080 mm 2458 mm 2630 mm 2590 mm Certificate No. FS ISO 9001: 2008 Jones & Shipman also offer Large Capacity Surface Grinders, Creepfeed Grinders & Cylindrical Grinders for Toolroom and Production applications.

2 Heavy duty surface & profile grinding machines TECHMASTER 634 & Easy Touchscreen control Dress cycle screens Grind cycle screens Affordable & sophisticated surface grinding with simple set-ups Specifically designed to offer unrivalled ease-of-use coupled to the highest levels of productivity Developed to offer to the operator the advantages of CNC control without the complexity of traditional CNC systems Easy manual, semi or fully automatic operation Rigid construction and innovative design Self Teach software, now with new colour graphics, enables inexperienced and experienced operators alike to be immediately more productive Main machine castings Quick set automatic dressing and grinding cycles enable unmanned operation Generously proportioned, high quality cast iron, bed, column, saddle & table Each casting designed to provide excellent rigidity In cycle/out of cycle dressing with full compensation Slideways Widely spaced Turcite coated wheelhead slides for sensitivity, precision and rigidity Table and saddle have hand scraped slideways, Turcite coated, automatic lubricated Direct drive wheelhead assembly Hardened and precision ground wheelspindle Precision angular contact rolling element bearings sealed and lubricated for life Dress on demand with full compensation Straight, Facing, Slotting or Vee form wheel macros Easy form dressing of complex profiles The operator is offered three modes of operation; Manual, Dress or Grind by simple single membrane button selection adjacent to the Touchscreen Ability to use CBN and Diamond wheels Plunge, area, face, multi-plunge, multi-slot, multi-plunge and area grind macros Easy down load/up load to Optional equipment Elevating wheel dresser Linear scale to Z axis Coolant units, paper roll & magnetic Variable grinding wheel speed Automatic compensated dressing on demand, in or out of cycle Straight or formed wheel dressing can be called up at the touch of a button at any time in either manual, single cycle or multi cycle mode with the Dress on Demand feature Fully interlocked enclosed table guarding is supplied as standard Both Y & Z axes controlled and positioned by Fanuc digital AC servo motors. Linear scale on Y axis (optional on Z axis) Table axis hydraulically powered from a modular power pack Table reversal easily set via sliding table dogs and proximity switches in the saddle This extremely simple system guides the operator and allows him to digitise positions and create programs without any computer knowledge No optional complex dressing devices required Machine guarding Axes Jones & Shipman easy-to-use icon based software with touchscreen control can interpolate two axes simultaneously to enable precision grinding of complex shapes, angles and surfaces Variable grinding wheel speed Semi-automatic wheei balancing CAD/CAM package for producing complex wheel profile programs When in grind cycle mode, the wheel will then return and continue from its last position after a Dress on Demand In addition, dressing can be selected to take place before and or during the grind cycle via the In or Out of Cycle dressing feature

3 Heavy duty surface & profile grinding machines TECHMASTER 634 & Easy Touchscreen control Dress cycle screens Grind cycle screens Affordable & sophisticated surface grinding with simple set-ups Specifically designed to offer unrivalled ease-of-use coupled to the highest levels of productivity Developed to offer to the operator the advantages of CNC control without the complexity of traditional CNC systems Easy manual, semi or fully automatic operation Rigid construction and innovative design Self Teach software, now with new colour graphics, enables inexperienced and experienced operators alike to be immediately more productive Main machine castings Quick set automatic dressing and grinding cycles enable unmanned operation Generously proportioned, high quality cast iron, bed, column, saddle & table Each casting designed to provide excellent rigidity In cycle/out of cycle dressing with full compensation Slideways Widely spaced Turcite coated wheelhead slides for sensitivity, precision and rigidity Table and saddle have hand scraped slideways, Turcite coated, automatic lubricated Direct drive wheelhead assembly Hardened and precision ground wheelspindle Precision angular contact rolling element bearings sealed and lubricated for life Dress on demand with full compensation Straight, Facing, Slotting or Vee form wheel macros Easy form dressing of complex profiles The operator is offered three modes of operation; Manual, Dress or Grind by simple single membrane button selection adjacent to the Touchscreen Ability to use CBN and Diamond wheels Plunge, area, face, multi-plunge, multi-slot, multi-plunge and area grind macros Easy down load/up load to Optional equipment Elevating wheel dresser Linear scale to Z axis Coolant units, paper roll & magnetic Variable grinding wheel speed Automatic compensated dressing on demand, in or out of cycle Straight or formed wheel dressing can be called up at the touch of a button at any time in either manual, single cycle or multi cycle mode with the Dress on Demand feature Fully interlocked enclosed table guarding is supplied as standard Both Y & Z axes controlled and positioned by Fanuc digital AC servo motors. Linear scale on Y axis (optional on Z axis) Table axis hydraulically powered from a modular power pack Table reversal easily set via sliding table dogs and proximity switches in the saddle This extremely simple system guides the operator and allows him to digitise positions and create programs without any computer knowledge No optional complex dressing devices required Machine guarding Axes Jones & Shipman easy-to-use icon based software with touchscreen control can interpolate two axes simultaneously to enable precision grinding of complex shapes, angles and surfaces Variable grinding wheel speed Semi-automatic wheei balancing CAD/CAM package for producing complex wheel profile programs When in grind cycle mode, the wheel will then return and continue from its last position after a Dress on Demand In addition, dressing can be selected to take place before and or during the grind cycle via the In or Out of Cycle dressing feature

4 Heavy duty surface & profile grinding machines TECHMASTER 634 & Easy Touchscreen control Dress cycle screens Grind cycle screens Affordable & sophisticated surface grinding with simple set-ups Specifically designed to offer unrivalled ease-of-use coupled to the highest levels of productivity Developed to offer to the operator the advantages of CNC control without the complexity of traditional CNC systems Easy manual, semi or fully automatic operation Rigid construction and innovative design Self Teach software, now with new colour graphics, enables inexperienced and experienced operators alike to be immediately more productive Main machine castings Quick set automatic dressing and grinding cycles enable unmanned operation Generously proportioned, high quality cast iron, bed, column, saddle & table Each casting designed to provide excellent rigidity In cycle/out of cycle dressing with full compensation Slideways Widely spaced Turcite coated wheelhead slides for sensitivity, precision and rigidity Table and saddle have hand scraped slideways, Turcite coated, automatic lubricated Direct drive wheelhead assembly Hardened and precision ground wheelspindle Precision angular contact rolling element bearings sealed and lubricated for life Dress on demand with full compensation Straight, Facing, Slotting or Vee form wheel macros Easy form dressing of complex profiles The operator is offered three modes of operation; Manual, Dress or Grind by simple single membrane button selection adjacent to the Touchscreen Ability to use CBN and Diamond wheels Plunge, area, face, multi-plunge, multi-slot, multi-plunge and area grind macros Easy down load/up load to Optional equipment Elevating wheel dresser Linear scale to Z axis Coolant units, paper roll & magnetic Variable grinding wheel speed Automatic compensated dressing on demand, in or out of cycle Straight or formed wheel dressing can be called up at the touch of a button at any time in either manual, single cycle or multi cycle mode with the Dress on Demand feature Fully interlocked enclosed table guarding is supplied as standard Both Y & Z axes controlled and positioned by Fanuc digital AC servo motors. Linear scale on Y axis (optional on Z axis) Table axis hydraulically powered from a modular power pack Table reversal easily set via sliding table dogs and proximity switches in the saddle This extremely simple system guides the operator and allows him to digitise positions and create programs without any computer knowledge No optional complex dressing devices required Machine guarding Axes Jones & Shipman easy-to-use icon based software with touchscreen control can interpolate two axes simultaneously to enable precision grinding of complex shapes, angles and surfaces Variable grinding wheel speed Semi-automatic wheei balancing CAD/CAM package for producing complex wheel profile programs When in grind cycle mode, the wheel will then return and continue from its last position after a Dress on Demand In addition, dressing can be selected to take place before and or during the grind cycle via the In or Out of Cycle dressing feature

5 General capacities Maximum grinding length x width Maximum wheelhead movement Maximum table load (Including chuck, if used) Standard magnetic chuck size 250 kg 800 x 390 mm 500 kg 800 x Distance between table and grinding wheel (new wheel) Size of grinding wheel: Maximum Speed of grinding wheel - 50Hz motor Speed of grinding wheel - 60Hz motor motor 3,7 kw (5,5 kw Option) 355 mm 5,5 kw Table Working surface Maximum longitudinal traverse, Manual/Hydraulic Traverse speed range (per minute) Traverse per revolution of handwheel 710 / 650 mm 800 x 960 / 920 mm Crossfeed Total cross traverse Automatic feed, least programmable increment Automatic feed rate (per minute) Sparkout under wheel Crossfeed control Feedback 0,0001-0, Wheelfeed Automatic two rate: Maximum increment programmable Downfeed control Feedback (Linear scale) Data Transfer Protocol Dimensions Machine weight, (approx.) Shipping dimensions 2800 kg 10,42 m kg 14 m3 World-wide sales and service Through our Group Companies and an established network of distribution Jones & Shipman guarantee competent advice and support in evaluating, purchasing and using high-quality cylindrical, surface and creepfeed grinding systems. Sales and service: Jones & Shipman Hardinge Limited Murrayfield Road, Leicester LE3 1UW, England +44 (0) (0) Jones & Shipman S.A.R.L. Zone Activillage, 8 allée des Ginkgos, B.P. 112, BRON Cedex, France +33 (0) (0) * (Heidenhain Absolute Linear Scale option) Heiligkreuzstrasse St.Gallen / Switzerland +41 (0) (0) info@kellenberger.net Längfeldweg Biel-Bienne 8 / Switzerland +41 (0) (0) Sales and service in USA & Canada: Hardinge Inc. One Hardinge Drive P.O. Box 1507 Elmira, New York USA +1 (607) (607) info@kellenberger.com JONES & SHIPMAN TECHMASTER EASY Touchscreen Controlled, Heavy duty Surface and Profile Grinders Specification 634Easy Easy GRINDING Sales and service for China: Hardinge China Ltd. No.1388 Kangqiao Rd (East), Shanghai, China Service: Sales: ext Usach Technologies Inc Davis Road Elgin, IL USA +1 (847) (847) info@usach.com Your nearest Jones & Shipman Partner: capacity 634 ABCDEFG- 25 mm 404 mm 150 mm 27 mm 567 mm 200 mm Base plan 634 A2980 mm B954 mm C744 mm D500 mm E1740 mm F2118 mm G2630 mm Machine height (both models) mm 2245 mm 744 mm 500 mm 2080 mm 2458 mm 2630 mm 2590 mm Certificate No. FS ISO 9001: 2008 Jones & Shipman also offer Large Capacity Surface Grinders, Creepfeed Grinders & Cylindrical Grinders for Toolroom and Production applications.

6 General capacities Maximum grinding length x width Maximum wheelhead movement Maximum table load (Including chuck, if used) Standard magnetic chuck size 250 kg 800 x 390 mm 500 kg 800 x Distance between table and grinding wheel (new wheel) Size of grinding wheel: Maximum Speed of grinding wheel - 50Hz motor Speed of grinding wheel - 60Hz motor motor 3,7 kw (5,5 kw Option) 355 mm 5,5 kw Table Working surface Maximum longitudinal traverse, Manual/Hydraulic Traverse speed range (per minute) Traverse per revolution of handwheel 710 / 650 mm 800 x 960 / 920 mm Crossfeed Total cross traverse Automatic feed, least programmable increment Automatic feed rate (per minute) Sparkout under wheel Crossfeed control Feedback 0,0001-0, Wheelfeed Automatic two rate: Maximum increment programmable Downfeed control Feedback (Linear scale) Data Transfer Protocol Dimensions Machine weight, (approx.) Shipping dimensions 2800 kg 10,42 m kg 14 m3 World-wide sales and service Through our Group Companies and an established network of distribution Jones & Shipman guarantee competent advice and support in evaluating, purchasing and using high-quality cylindrical, surface and creepfeed grinding systems. Sales and service: Jones & Shipman Hardinge Limited Murrayfield Road, Leicester LE3 1UW, England +44 (0) (0) Jones & Shipman S.A.R.L. Zone Activillage, 8 allée des Ginkgos, B.P. 112, BRON Cedex, France +33 (0) (0) * (Heidenhain Absolute Linear Scale option) Heiligkreuzstrasse St.Gallen / Switzerland +41 (0) (0) info@kellenberger.net Längfeldweg Biel-Bienne 8 / Switzerland +41 (0) (0) Sales and service in USA & Canada: Hardinge Inc. One Hardinge Drive P.O. Box 1507 Elmira, New York USA +1 (607) (607) info@kellenberger.com JONES & SHIPMAN TECHMASTER EASY Touchscreen Controlled, Heavy duty Surface and Profile Grinders Specification 634Easy Easy GRINDING Sales and service for China: Hardinge China Ltd. No.1388 Kangqiao Rd (East), Shanghai, China Service: Sales: ext Usach Technologies Inc Davis Road Elgin, IL USA +1 (847) (847) info@usach.com Your nearest Jones & Shipman Partner: capacity 634 ABCDEFG- 25 mm 404 mm 150 mm 27 mm 567 mm 200 mm Base plan 634 A2980 mm B954 mm C744 mm D500 mm E1740 mm F2118 mm G2630 mm Machine height (both models) mm 2245 mm 744 mm 500 mm 2080 mm 2458 mm 2630 mm 2590 mm Certificate No. FS ISO 9001: 2008 Jones & Shipman also offer Large Capacity Surface Grinders, Creepfeed Grinders & Cylindrical Grinders for Toolroom and Production applications.