Flare Fittings. The World Standard. SAE 45 Flare. Inverted Flare. Access Valves
|
|
- Jayson Reynard Fox
- 5 years ago
- Views:
Transcription
1 Flare Fittings SA 45 Flare eets SA Functional Requirements Resists Vibration Resists echanical Pull-out U isted Inverted Flare U isted conomical Steel ut option Access Valves Teflon Seal on Valve core achined to ARI Standards Finger Tight Quick Seal Cap The World Standard
2 Flare Fittings 48F ale Connector 48IFH ale Connector AVU1 ale Connector 149F/249F ale lbow 249IFH/249IF ale lbow AV1 ale lbow Flare to ale PT 145F Branch Tee 245IFH Branch Tee Page 8 Page 16 Page 20 Page 10 Page 16 Page F Run Tee 251IFH Run Tee AVT3 Run Tee 159H/259F 45 ale lbow 259IFH 45 ale lbow 256F Adapter Tee Page 9 Page 16 Page 11 Page 17 Page 20 Page 12 Page 17 Flare to Flare 42F Union 42IFH Union AVU2 Union 144F Union Tee 244IFH Union Tee AVT2 Union Tee Page 12 Page 7 Page 15 Page 19 Page 9 Page F Union lbow 255IFH Union lbow 660FH Flare Union 147F Cross AVC1 Cross Page 20 Page 11 Page 17 Page 13 Page 9 Page 20 46F Female Connector 46IFH Female Connector AVUR3 Female Connector 150F Female lbow 250IFH Female lbow 252IFH Branch Tee Flare to Female PT Flare to etric Straight Thread 1495F ale lbow 48F-I ale Connector 1595F 45 ale lbow Page 8 Page 15 Page 21 Page 11 Page F-I ale lbow Flare to Straight Thread Page 8 Page 10 Page 12 Page 20 Swivels 159F-I 45 ale lbow 14FSV Swivel ut Connector US5 Flare Adapter AVU1F1 ale Connector 166FSV Swivel lbow Page F ale Connector AVCS4 Cross Page 9 Page 10 Page 12 Page 6 Page 6 Page 12 Page 21 AVUS4 Swivel Connector AVTS4 Swivel Run Tee AVTS6 Swivel Branch Tee Page 21 Page 21 Page 22 2
3 Flare Fittings 1F Refrigerant rum 66IFH Reducer 664FH Female Flare to Pipe 88AC Refrigerant Adapter 880AC Refrigerant Adapter 881AC Refrigerant Adapter Adapters Bulkheads AVU2BH Bulkhead Union Page 5 Page 13 Page 13 Page 23 Page 23 Page 23 AVUS3BH Solder Union Flare to Solder 43F Connector AVUS xtended Copper Tube AVTS Solder tee AVTS xtended Solder Tee AVUS Way Solder Page 19 Page 19 Page 7 Page 19 Page 19 AVUS Way Solder AVUS Solder Connector Page 19 Page 21 Page 21 Page 21 14F ong Forged ut 14FSX Short Forged ut 14FS Forged Reducing ut 41F ong ut 41FS/41FX Shorter ut 41IF Inverted Flare ut Auxiliary Page 5 Page 5 Page 6 Page 6 Page 6, 7 Page 15 41IFS Inverted Flare ut Steel 41IFF Inverted Flare Piloted ut 639F Seal Plug 640F CAP UT 640QSFC Seal Cap with Chain 640QSFCR Seal Cap with Core Remover 2GF Flace Gasket 3GF Seal Bonnet Page 15 Page 15 Page 13 Page 13 Page 22 Page 22 Page 5 CR Core Remover VC Valve Core Page 5 Page 22 Page 22 3
4 SA 45 Flared Fittings Advantages This economical fitting resists mechanical pullout. Can be assembled and disassembled repeatedly. anufactured from CA 360, CA 345 or CA 377 brass. Specifications isted with Underwriter s aboratories for flammable liquid, marine, refrigeration and gas applications. eets functional requirements of SA J512 and J513. Refer to list of U listed fittings on page 10 for specific configurations. Applications Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. anufactured especially for hard-to-hold liquids and gases. Working Pressure Ranges Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73 F with copper tubing: PSI TUB TUB O.. (I.) WA (I.) / / / / / / / / /8.035 Temperature Ranges From -65 to +250 F. Vibration Short nut may be used when vibration is minimal. The long nut offers additional vibration capacity. Assembly Instructions 1. Cut tubing squarely and clean tube end thoroughly to remove burrs. 2. Place nut onto tube. Place threaded end of nut toward end of tube. 3. Flare tube end with flaring tool to provide 45 flare. 4. Clamp tube flare between nut and nose of fitting body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 to 1/2 turn past finger tight for a metal-to-metal seal. Flare fittings are easy to disassemble and may be reassembled repeatedly, for a leak-proof connection. Order By part number and name. SA 45 flared bodies and nuts are separate items. Both numbers must be indicated when ordered. omenclature Part numbers are constructed from symbols that identify the style and size of the fitting. The first series of numbers and letters identifies the style and type fitting. The second series of numbers describes the size. xample: 1 49 F 6 4 Forging (1) xtrusion (2) Flare to external pipe, 90 elbow Flare fitting 3/8" (6/16) tube O.. size 1/4" (4/16) pipe size Sizes Tube sizes are determined by the numbers of sixteenths of an inch in the tube O.. Special Fittings Fitting configurations and/or sizes other than those shown in the catalog can be furnished. It is suggested that a print or sketch be submitted with the inquiry. Special U stamped fittings are available. Please consult price list. Pricing Only items priced in current supplementary price list P3501 are carried in stock. Price and delivery for non-stock items furnished on request for specified quantity. 4
5 45 Flare Fittings Refrigerant rum a Aapter 1F Ref. SA TUB PIP C FOW O. O.. THRA HX IA. 1F-4-8 1/4 1/2 1-1/ F-4-12* 1/4 3/4 1-1/ F-6-12* 3/8 3/4 1-1/ F-8-12* 1/2 3/4 1-1/ Gasket Furnished with each 1F adapter C HX Copper Flare Gasket 2GF Ref. SA TUB O. SIZ A 2GF-3 3/ GF-4 1/4.36 2GF-5 5/ GF-6 3/8.56 2GF-8 1/2.67 2GF-10 5/8.78 2GF-12* 3/4.97 A Seal Bonnet 3GF Ref. SA TUB O. SIZ A 3GF-3 3/ GF-4 1/4.37 3GF-5 5/ GF-6 3/8.56 3GF-8 1/2.67 3GF-10 5/8.78 3GF-12* 3/ A ong Forged ut 14F Ref. SA TUB STRAIGHT C O. SIZ THRA HX 14F-4 1/4 7/ / F-6 3/8 5/ / F-8 1/2 3/ / F-10 5/8 7/ / C HX Short Forged ut 14FSX Ref. SA TUB STRAIGHT C O. SIZ THRA HX 14FSX-4 1/4 7/ / FSX-5 5/16 1/ / FSX-6 3/8 5/ / FSX-8 1/2 3/ / FSX-10 5/8 7/ / FSX-12* 3/4 1-1/ / C HX *Comes standard with thread protectors 5
6 45 Flare Fittings Short Forged Reducing uts 14FS TUB STRAIGHT C O. SIZ THRA HX 14FS-6-4 3/8 to 1/4 5/ / FS-8-6 1/2 to 3/8 3/ / FS /8 to 1/2 7/ / C HX Swivel ut Valve Connector 14FSV Ref. SA TUB STRAIGHT C O. SIZ THRA HX 14FSV-4 1/4 7/ / FSV-6 3/8 5/ / FSV-8 1/2 3/ / FSV-10 5/8 7/ / Flare Adapter US5 TUB STRAIGHT C O. SIZ THRA HX US5-4 1/4 7/ / US5-6 3/8 5/ / US5-8 1/2 3/ / US5-10 5/8 7/ / C HX C Hex ong ut 41F Ref. SA TUB STRAIGHT C O. SIZ THRA HX 41F-2 1/8 5/ / F-3 3/16 3/8-24 7/ F-4 1/4 7/ / F-5 5/16 1/2-20 5/ F-6 3/8 5/8-18 3/ F-8 1/2 3/4-16 7/ F-10 5/8 7/ / F-12* 3/4 1-1/ / C HX Short ut 41FS / Shorter ut 41FX Ref. SA TUB STRAIGHT C O. SIZ THRA HX 41FS-2 1/8 5/ / FS-3 3/16 3/8-24 7/ FS-4 1/4 7/ / FS-5 5/16 1/2-20 5/ FS-6 3/8 5/8-18 3/ FX-6 3/8 5/8-18 3/ FS-8 1/2 3/4-16 7/ FX-8 1/2 3/4-16 7/ FS-10 5/8 7/ / FX-10 5/8 7/ / FX-12 3/4 1-1/ / FS-12* 3/4 1-1/ / FS-14* 7/8 1-1/ / C HX *Comes standard with thread protectors 6
7 45 Flare Fittings Reducing uts 41FS TUB STRAIGHT C O. SIZ THRA HX 41FS-6-4 3/8 to 1/4 5/8-18 3/ FS-8-6 1/2 to 3/8 3/4-16 7/ FS /8 to 1/2 7/ / C HX Union 42F Ref. SA *Thread Protectors TUB STRAIGHT C O. SIZ THRA HX 42F-2 1/8 5/ / F-3 3/16 3/8-24 3/ F-4 1/4 7/ / F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-16 3/ F-10 5/8 7/8-14 7/ F-12* 3/4 1-1/ / F-14* 7/8 1-1/ / C HX Union Reducers 42F Ref. SA TUB 2 TUB 1 STRAIGHT 2 STRAIGHT C FOW FOW O. SIZ SIZ THRA THRA HX IA. 1 IA. 2 42F-6-4 1/4 3/8 7/ /8-18 5/ F-6-5 5/16 3/8 1/2-20 5/8-18 5/ F-8-4 1/4 1/2 7/ /4-16 3/ F-8-6 3/8 1/2 5/8-18 3/4-16 3/ F /8 5/8 5/8-18 7/8-14 7/ F /2 5/8 3/4-16 7/8-14 7/ C HX Flare to Solder 43F Ref. SA TUB SOR STRAIGHT C FOW O. SIZ O THRA HX IA. 43F-4-4 1/4 1/4 7/ / F-4-5 1/4 5/16 7/ / F-4-6 1/4 3/8 7/ / F-6-4 3/8 1/4 5/8-18 5/ F-6-5 3/8 5/16 5/8-18 5/ F-6-6 3/8 3/8 5/8-18 5/ F-6-8 3/8 1/2 5/8-18 5/ F /8 5/8 5/8-18 3/ F-8-6 1/2 3/8 3/4-16 3/ F-8-8 1/2 1/2 3/4-16 3/ F /2 5/8 3/4-16 3/ F /8 1/2 7/8-14 7/ F /8 5/8 7/8-14 7/ F-10-12* 5/8 3/4 7/8-14 7/ F-10-14* 5/8 7/8 7/ F-12-12* 3/4 3/4 1-1/ / F-12-14* 3/4 7/8 1-1/ / C HX *Comes standard with thread protectors 7
8 45 Flare Fittings Female Connector 46F Ref. SA TUB PIP STRAIGHT C FOW O. SIZ THRA THRA HX IA. 46F-2-2 1/8 1/8 5/ / F-3-2 3/16 1/8 3/8-24 9/ F-4-2 1/4 1/8 7/ / F-4-4 1/4 1/4 7/ / F-4-6 1/4 3/8 7/ / F-5-2 5/16 1/8 1/2-20 9/ F-5-4 5/16 1/4 1/ / F-6-2 3/8 1/8 5/8-18 5/ F-6-4 3/8 1/4 5/ / F-6-6 3/8 3/8 5/ / F-6-8 3/8 1/2 5/ F-8-4 1/2 1/4 3/4-16 3/ F-8-6 1/2 3/8 3/ / F-8-8 1/2 1/2 3/ F-8-12* 1/2 3/4 3/ / F /8 3/8 7/8-14 7/ F /8 1/2 7/ F-10-12* 5/8 3/4 7/ / C HX ale Connector 48F Ref. SA TUB PIP STRAIGHT C FOW O. SIZ THRA THRA HX IA. 48F-2-2 1/8 1/8 5/ / F-3-2 3/16 1/8 3/8-24 7/ F-3-4 3/16 1/4 3/8-24 9/ F-4-2 1/4 1/8 7/ / F-4-4 1/4 1/4 7/ / F-4-6 1/4 3/8 7/ / F-4-8 1/4 1/2 7/ / F-5-2 5/16 1/8 1/2-20 1/ F-5-4 5/16 1/4 1/2-20 9/ F-5-6 5/16 3/8 1/ / F-6-2 3/8 1/8 5/8-18 5/ F-6-4 3/8 1/4 5/8-18 5/ F-6-6 3/8 3/8 5/ / F-6-8 3/8 1/2 5/8-18 7/ F-6-12* 3/8 3/4 5/ / F-8-4 1/2 1/4 3/4-16 3/ F-8-6 1/2 3/8 3/4-16 3/ F-8-8 1/2 1/2 3/4-16 7/ F /2 3/4 3/ / F /8 1/4 7/8-14 7/ F /8 3/8 7/8-14 7/ F /8 1/2 7/8-14 7/ F-10-12* 5/8 3/4 7/ / F-12-8* 3/4 1/2 1-1/ / F-12-12* 3/4 3/4 1-1/ / F-14-12* 7/8 3/4 1-1/ / C HX Flare to etric Adaptor 48F-X-IX TUB TRIC UBR SIZ THRA HX 48F-8-II6 1/2 16 X 1.5 7/ F-10-I27 5/8 27 x / F-12-I27* 3/4 27 x / ote: Fluorocarbon o-ring is standard Hex Viton O-Ring *Comes standard with thread protectors 8
9 45 Flare Fittings Flare to SA Straight Thread 485F TUB STRAIGHT FOW O. SIZ THRA HX IA. 485F-12-8* 3/4 3/ / F-12-12* 3/4 1 1/ / Viton O-Ring Hex Union Tee 144F-244F Ref. SA TUB STRAIGHT FOW O. SIZ THRA IA. 144F-3 3/16 3/ F-4 1/4 7/ F-4 1/4 7/ F-5 5/16 1/ F-6 3/8 5/ F-8 1/2 3/ F-10 5/8 7/ F 244F Union Tee 144F-244F combination sizes 1 TUB 2 TUB 3 TUB FOW O. SIZ SIZ SIZ 1 IA. 144F /8 3/8 1/ F /2 1/2 3/ ale Branch Tee 145F 3 Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 145F-2-2 1/8 1/8 5/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 1/2 7/ Cross 147F Ref. SA TUB STRAIGHT FOW O. SIZ THRA IA. 147F-6 3/8 5/ *Comes standard with thread protectors 9
10 45 Flare Fittings ale lbow 149F-249F Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 149F-2-2 1/8 1/8 5/ F-3-2 3/16 1/8 3/ F-3-2 3/16 1/8 3/ F-4-2 1/4 1/8 7/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-4-4 1/4 1/4 7/ F-4-6 1/4 3/8 7/ F-4-6 1/4 3/8 7/ F-4-8 1/4 1/2 7/ F-5-2 5/16 1/8 1/ F-5-2 5/16 1/8 1/ F-5-4 5/16 1/4 1/ F-5-4 5/16 1/4 1/ F-5-6 5/16 3/8 1/ F-6-2 3/8 1/8 5/ F-6-2 3/8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-6-8 3/8 1/2 5/ F-6-12* 3/8 3/4 5/ F-8-4 1/2 1/4 3/ F-8-6 1/2 3/8 3/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F-8-8 1/2 1/2 3/ F-8-12* 1/2 3/4 3/ F /8 1/4 7/ F /8 3/8 7/ F /8 1/2 7/ F /8 1/2 7/ F-10-12* 5/8 3/4 7/ F-12-8* 3/4 1/2 1-1/ F-12-12* 3/4 3/4 1-1/ F-14-12* 7/8 3/4 1-1/ F 249F Flare lbow to SA etric Straight Thread 149F-X-IX TUB TRIC UBR SIZ THRA 1 149F-10-I27 5/8 27 x ote: Fluorocarbon o-ring is standard 1 Viton O-Ring Flare lbow to SA Straight Thread 1495F TUB STRAIGHT FOW O. SIZ THRA HX IA. 1495F-12-8* 3/4 3/4-16 7/ F-12-12* 3/4 1-1/ / Hex Viton O-Ring *Comes standard with thread protectors 10
11 45 Flare Fittings Female lbow 150F Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 150F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-2 3/8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-6 3//8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /2 3/4 3/ F-10-8* 5/8 1/2 7/ F-10-12* 5/8 3/4 7/ ale Run Tee 151F Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 151F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-5-4 5/16 1/4 1/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-8 3/8 1/2 5/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 1/2 7/ Union lbow 155F Ref. SA TUB STRAIGHT FOW O. SIZ THRA IA. 155F-2 1/8 5/ F-3 3/16 3/ F-4 1/4 7/ F-5 5/16 1/ F-6 3/8 5/ F-8 1/2 3/ F-10 5/8 7/ F-12* 3/4 1-1/ *Comes standard with thread protectors 11
12 45 Flare Fittings 45 lbow 159F-259F Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 159F-4-2 1/4 1/8 7/ F-4-2 1/4 1/8 7/ F-4-4 1/4 1/4 7/ F-4-4 1/4 1/4 7/ F-5-2 5/16 1/8 1/ F-5-4 5/16 1/4 1/ F-6-2 3/8 1/8 5/ F-6-4 3/8 1/4 5/ F-6-4 3/8 1/4 5/ F-6-6 3/8 3/8 5/ F-6-6 3/8 3/8 5/ F-8-4 1/2 1/4 3/ F-8-6 1/2 3/8 3/ F-8-6 1/2 3/8 3/ F-8-8 1/2 1/2 3/ F /8 3/8 7/ F /8 3/8 7/ F /8 1/2 7/ F /8 1/2 7/ F-12-8* 3/4 1/2 1-1/ F 259F 45 Flare lbow to SA etric Straight Thread 159F-X-IX TUB TRIC UBR SIZ THRA HX 159F-8-II6 1/2 16 X mm F-10-I27 5/8 27 x / ote: Fluorocarbon o-ring is standard Hex Viton O-Ring 45 Flare to SA Straight Thread 1595F TUB STRAIGHT FOW O. SIZ THRA HX IA. 1595F-8-8 1/2 3/4-16 7/ F-12-8* 3/4 3/4-16 7/ F-12-12* 3/4 1 1/ / Hex Viton O-Ring 90 Swivel lbow 166FSV TUB STRAIGHT C FOW O. SIZ THRA HX IA. 166FSV-4-4 1/4 7/ / FSV-6-6 3/8 5/8-18 3/ FSV-8-8 1/2 3/4-16 7/ FSV /8 7/ FSV-12-12* 3/4 1-1/ / C Hex Adapter Tee 256F TUB PIP STRAIGHT FOW O. SIZ THRA THRA 1 IA F-4-2 1/4 1/8 7/ *Comes standard with thread protectors 12
13 45 Flare Fittings Flared Seal Plug 639F Ref. SA TUB STRAIGHT C O. SIZ THRA HX 639F-4 1/4 7/ / F-5 5/16 1/2-20 1/ F-6 3/8 5/8-18 5/ F-8 1/2 3/4-16 3/ F-10 5/8 7/8-14 7/ C HX Cap ut 640F Ref. SA TUB STRAIGHT C O. SIZ THRA HX 640F-3 3/16 3/8-24 1/ F-4 1/4 7/ / F-5 5/16 1/2-20 5/ F-6 3/8 5/8-18 3/ F-8 1/2 3/4-16 7/ F-10 5/8 7/ /16.97 C HX Flared Union Female Flare to Female Flare 660FH Ref. SA TUB STRAIGHT C FOW O. SIZ THRA HX IA. 660FH-4 1/4 7/ / FH-6 3/8 5/ / FH-8 1/2 3/ / FH-10 5/8 7/ / C HX Reducer ale Flare to Female Flare 661FH Ref. SA TUB 2 TUB 1 STRAIGHT 2 STRAIGHT C FOW O. SIZ SIZ THRA THRA HX IA. 661FH-4-6 1/4 3/8 7/ / / FH-4-8 1/4 1/2 7/ / / FH-6-4 3/8 1/4 5/8-18 7/ / FH-6-8 3/8 1/2 5/8-18 3/ / FH-8-6 1/2 3/8 3/4-16 5/ / FH /2 5/8 3/4-16 7/ / FH /8 1/2 7/8-14 3/ / FH-10-12* 5/8 3/4 7/ / / FH-12-10* 3/4 5/8 1-1/ / / C HX Female Flare to ale Pipe Thread 664FH Ref. SA TUB PIP STRAIGHT C FOW O. SIZ THRA THRA HX IA. 664FH-4-2 1/4 1/8 7/ / FH-4-4 1/4 1/4 7/ / FH-6-4 3/8 1/4 5/ / FH-8-6 1/2 3/8 3/ / C HX Should be used with 2GF copper flare gasket. *Comes standard with thread protectors 13
14 Inverted Flared Fittings Advantages Built to resist mechanical pullout. This economical fitting can be assembled and disassembled repeatedly. Readily available in a broad selection of styles to fill your specific needs. anufactured from CA 360 or CA 345 brass. Specifications isted with Underwriter s aboratories for flammable liquid and gas. eets functional requirements of SA, J512. Refer to list of U listed fittings on page 10 for specific configurations. Applications Use with copper, brass, aluminum and welded steel hydraulic tubing that can be flared. anufactured especially for hard-to-hold liquids and gases. Working Pressure Ranges Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73 F with copper tubing: PSI TUB TUB O.. (I.) WA (I.) / / / / / / / /4.035 Temperature Ranges From -65 to +250 F. Vibration Will withstand minimal vibration movements. Assembly Instructions 1. Cut tubing squarely and clean tube end thoroughly to remove burrs. 2. Place nut onto tube. Place threaded end of nut toward end of tube. 3. On thin wall copper, welded or brazed tubing, use double flare to prevent pinch-off or cracked flares. 4. Clamp tube flare between nut and flare seat of body by screwing nut on finger-tight. Tighten with a wrench an additional 1/4 turn for a metal-to-metal seal. ote: The seat dimensions are predicated on practical threading limitations and use of these fittings with double flared tubing. Order By part number and name. Bodies and nuts are separate items and individual part numbers must be indicated when ordered. omenclature Part numbers are constructed from symbols that identify the style and size of the fitting. The first series of numbers and letters identifies the style and type fitting. The second series of numbers describes the size. xample: 48 1F 1FH 4 2 Half Union Inverted Flared (ight uty) Inverted Flared (Heavy uty) 1/4 (4/16) tube O.. 1/8 (2/16) pipe thread Sizes Tube sizes are determined by the numbers of sixteenths of an inch in the tube O.. Special Fittings Fitting configurations and/or sizes other than those shown in the catalog can be furnished. It is suggested that a print or sketch be submitted with the inquiry. Special U stamped fittings are available. Please consult price list. Pricing Only items priced in current supplementary price list P3501 are carried in stock. Price and delivery for non-stock items furnished on request for specified quantity. 14
15 Inverted Flare Fittings ut 41IF Ref. SA TUB STRAIGHT C O. SIZ THRA HX 41IF-2 1/8 5/ / IF-3 3/16 3/8-24 3/ IF-4 1/4 7/ / IF-5 5/16 1/2-20 1/ IF-6 3/8 5/8-18 5/ IF-8 1/2 3/4-18 3/ C HX Steel ut Zinc Chromate 41IFS Ref. SA TUB STRAIGHT C O. SIZ THRA HX 41IFS-3 3/16 3/8-24 3/ IFS-4 1/4 7/ / IFS-5 5/16 1/2-20 1/ IFS-6 3/8 5/8-18 5/ IFS-8 1/2 3/4-18 3/ IFS-10 5/8 7/8-18 7/ IFS-12 3/4 1-1/ / C HX Piloted ut 41IFF for Single Flared Tubing Ref. SA TUB STRAIGHT C O. SIZ THRA HX 41IFF-2 1/8 5/ / IFF-3 3/16 3/8-24 3/ IFF-4 1/4 7/ / IFF-5 5/16 1/2-20 1/ IFF-6 3/8 5/8-18 5/ IFF-8 1/2 3/4-18 3/ C HX Union 42IFH Ref. SA TUB STRAIGHT C O. SIZ THRA HX 42IFH-2 1/8 5/ / IFH-3 3/16 3/ / IFH-4 1/4 7/ / IFH-5 5/16 1/ / IFH-6 3/8 5/8-18 3/ IFH-8 1/2 3/ / C HX Female Connector 46IFH Ref. SA TUB PIP STRAIGHT C FOW O. SIZ THRA THRA HX IA. 46IFH-3-2 3/16 1/8 3/8-24 1/ IFH-4-2 1/4 1/8 7/ / IFH-5-2 5/16 1/8 1/ / IFH-6-4 3/8 1/4 5/8-18 3/ IFH-8-6 1/2 3/8 3/ / C HX 15
16 Inverted Flare Fittings ale Connector 48IFH Ref. SA TUB PIP STRAIGHT C FOW O. SIZ THRA THRA HX IA. 48IFH-2-2 1/8 1/8 5/ / IFH-3-2 3/16 1/8 3/ / IFH-4-2 1/4 1/8 7/ / IFH-4-4 1/4 1/4 7/ / IFH-5-2 5/16 1/8 1/ / IFH-5-4 5/16 1/4 1/ / IFH-6-2 3/8 1/8 5/8-18 3/ IFH-6-4 3/8 1/4 5/8-18 3/ IFH-6-6 3/8 3/8 5/8-18 3/ IFH-8-4 1/2 1/4 3/ / IFH-8-6 1/2 3/8 3/ / IFH-8-8 1/2 1/2 3/ / IFH /8 1/2 7/ / IFH /4 3/4 1-1/ / C HX Union Tee 244IFH Ref. SA TUB STRAIGHT FOW O. SIZ THRA IA. 244IFH-3 3/16 3/ IFH-4 1/4 7/ IFH-5 5/16 1/ IFH-6 3/8 5/ IFH-8 1/2 3/ ale Branch Tee 245IFH Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 245IFH-4-2 1/4 1/8 7/ IFH-6-4 3/8 1/4 5/ ale lbow 249IFH 249IF Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 249IFH-2-2 1/8 1/8 5/ IFH-3-2 3/16 1/8 3/ IFH-4-2 1/4 1/8 7/ IFH-4-4 1/4 1/4 7/ IFH-5-2 5/16 1/8 1/ IFH-5-4 5/16 1/4 1/ IFH-6-2 3/8 1/8 5/ IF-6-4 3/8 1/4 5/ IFH-6-4 3/8 1/4 5/ IFH-6-6 3/8 3/8 5/ IFH-8-4 1/2 1/4 3/ IF /2 3/8 3/ IFH-8-6 1/2 3/8 3/ IFH-8-8 1/2 1/2 3/ IFH /8 3/8 7/ IFH /8 1/2 7/ ight uty Series 16
17 Inverted Flare Fittings Female lbow 250IFH Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 250IFH-3-2 3/16 1/8 3/ IFH-4-2 1/4 1/8 7/ IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ ale Run Tee 251IFH Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA 1 IA IFH-3-2 3/16 1/8 3/ IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ Female Branch Tee 252IFH Ref. SA TUB PIP STRAIGHT FOW O. SIZ THRA THRA IA. 252IFH-5-2 5/16 1/8 1/ IFH-6-4 3/8 1/4 5/ Union lbow 255IFH TUB STRAIGHT FOW O. SIZ THRA IA. 255IFH-4 1/4 7/ lbow 259IFH Ref. SA TUB PIP STRAIGHT C FOW O. SIZ THRA THRA HX IA. 259IFH-3-2 3/16 1/8 3/ / IFH-4-2 1/4 1/8 7/ / IFH-5-2 5/16 1/8 1/2-20 5/ IFH-5-4 5/16 1/4 1/2-20 5/ IFH-6-4 3/8 1/4 5/ / IFH-8-6 1/2 3/8 3/4-18 7/ IFH /8 1/2 7/ / C HX 17
18 Access Valves Advantages Access Valves are designed to offer convenient low cost access ports for Refrigeration service. All Access Valves feature 1/4" SA male flare access ports and are furnished with a finger tight quick seal cap. For greater flexibility, all Tees and Crosses are machined to receive an access core in all 1/4" SA flare ends. This allows for 2 or more access connections in one fitting plus greater flexibility in the positioning of the valves. All Access Valves with pipe connections have internal OS solder cups so that these valves may be installed in either of 2 ways. Applications Access Valves may be installed in any position on either high or low side for quick testing, pressure checking, purging or charging. Valve Bodies Straight Access Valve bodies are manufactured from brass rod CA360 or CA345. Shaped Access Valve bodies are manufactured from brass forge rod CA377. All Access Valve bodies are machined in accordance with ARI standard 720. Valve Core Parker valve cores meet ARI standard 720 and are designed for use with all florocarbon refrigerants such as R-12,R-22 and R-502, R- 134a and are resistant to oils, alkalies and dilute mineral acids. Working Pressure and Temperature Ranges Up to 500 PSI -20 F to +220 F Order By part number and name. omenclature Part numbers are constructed from symbols that identify the style and size of the valve. The first series of letters identifies the style and type valve. The second series of numbers describes the size. xample: X AV T1 2 Packaged Access Valve ale Branch Tee 1/8" (2/16) Pipe Thread Sizes Tube sized are determined by the number of sixteenths of an inch in the tube O.. Special Fittings Fitting configurations and/or sizes other than those shown in the catalog can be furnished. It is suggested that a print or sketch be submitted with the inquiry. Pricing Only items priced in current supplementary price list P3501 are carried in stock. Price and delivery for non-stock items furnished on request for specified quantity. 18
19 Access Valves xtended Copper Tube AVUS O. COCTIO SIZ AVUS-2 1/8 O.. Tube AVUS-3 3/16 O.. Tube AVUS-4 1/4 O.. Tube AVUS-5 5/16 O.. Tube AVUS-6 3/8 O.. Tube AVUS-8 1/2 O.. Tube AVUS-9 1/8 O.. Tube; Additional steps on body for 3/16, 1/4, 5/16, 3/8 O.. Tube. 3/16, 1/4, or 5/16 Solder Fitting/Swaged Tube. AVUS-11 3/16 O.. Tube; Additional steps on body for 1/4 or 3/8 Solder Fittings/Swaged Tubes 5/16 O.. Tube. Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. Solder Tee AVTS O. COCTIO SIZ AVTS-4 1/4 O.. Tube or 3/8 Solder Fitting/Swaged Tube AVTS-5 5/16 O.. Tube or 3/8 Solder Fitting/Swaged Tube AVTS-6 3/8 O.. Tube or 1/2 Solder Fitting/Swaged Tube AVTS-8 1/2 O.. Tube or 5/8 Solder Fitting/Swaged Tube Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. xtended Solder Tee AVTS O. COCTIO SIZ AVTS-6 3/8 O.. Tube/Solder 5/16, 3/8 & 7/16 Tube Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. Full Union AVU2 O. AVU2-4 COCTIO SIZ 1/4 O.. Flare Tube With Forged Flare ut Bulkhead Union AVU2BH O. AVU2BH-4 COCTIO SIZ 1/4" Bulkhead Access X 1/4" SA With Forged ut Bulkhead Solder Union AVUS3BH O. COCTIO SIZ AVUS3BH-4 1/4" Bulkhead Access X 3 Way OS Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. 19
20 Access Valves Forged Union Tee AVT2 O. AVT2-4 COCTIO SIZ 1/4" Access All nds With 2 Forged Flare uts and One Core and Cap ale Connector AVU1 O. COCTIO SIZ AVU1-2 1/8" ale Pipe or 1/4" O.. Solder AVU1-4 1/4" ale Pipe or 5/16" O.. Solder Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. Access Valve Assembly AVUIFI O. COCTIO SIZ AVUIFI-4 7/16-20 SA Straight thread O-Ring Port ote: Standard o-ring is neoprene. Consult Brass Products ivision for optional o-rings Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. Forged ale lbow AV1 O. COCTIO SIZ AV1-2 1/8" ale Pipe or 1/4" O.. Solder Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. Forged ale Run Tee AVT3 O. AVT3-2 AVT3-4 COCTIO SIZ 1/8" ale Pipe or 1/4" O.. Solder on Run x 1/4" Access on Run and Branch With One Core and Cap 1/4" ale Pipe or 5/16" O.. Solder on Run x 1/4" Access on Run and Branch With One Core and Cap Forged ale Cross AVC1 O. AVC1-4 COCTIO SIZ 1/4" ale Pipe or 5/16" O.. Solder x 1/4" Access on all Flare nds With One Core and Cap 20
21 Access Valves Swivel Cross AVCS4-4 O. COCTIO SIZ AVCS4-4 1/4" Forged Female Flare Swivel With epressor x 1/4" Access on all Flare nds with One Core and Cap Female Connector AVUR3 O. AVUR3-4 COCTIO SIZ 1/4" Female Flare with Copper Gasket 3 Way Solder Connector AVUS3 O. COCTIO SIZ AVUS3-40 For 3/16" O.. Tube or 1/4" and 3/8" Solder Fitting/Swaged Tube Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. 9 Way Solder Connector AVUS3 O. COCTIO SIZ AVUS3-49 For 3/16", 1/4", 5/16", 3/8" or 1/2" O.. Tube. Also Fits 3/16",1/4" and 5/16" Solder Fitting/Swaged Tube or 1/8" Hole ay Be Punched in arger Size Tube Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. Straight Solder Connector AVUS O. COCTIO SIZ AVUS-42 1/8" O.. Tube or 1/4" Solder Fitting/Swaged Tube AVUS-43 3/16" O.. Tube or 1/4" Solder Fitting/Swaged Tube AVUS-44 1/4" O.. Tube or 3/8" Solder Fitting/Swaged Tube AVUS-45 5/16" O..Tube or 1/2" Solder Fitting/Swaged Tube AVUS-46 3/8" O.. Tube or 1/2" Solder Fitting/Swaged Tube Product comes with valve core loose and should be torqued after brazing to ARI 720 standard. Swivel Connector AVUS4 O. AVUS4-4 COCTIO SIZ 1/4" Forged Female Flare Swivel ut with epressor Forged Female Run Swivel Tee AVTS4 O. AVTS4-4 COCTIO SIZ 1/4" Female Flare Swivel x 1/4" Access on Both Run and Branch AVTS4-4 1/4" Female Flare Swivel on Run with epressor x 1/4" Access on Both Run and Branch 21
22 Access Valves Forged Female Branch Tee AVTS6 O. AVTS6-4 AVTS6-4 COCTIO SIZ 1/4" Female Flare Swivel x 1/4" Access on Both nds 1/4" Female Flare Swivel on Branch with epressor x 1/4" Access on Both nds Quick Seal Caps 640QSF O. 640QSF-4 640QSF-6 COCTIO SIZ 1/4" SA Seal Cap with Seal Gasket 3/8" SA Seal Cap with Seal Gasket Quick Seal Cap with Core Remover 640QSFCR O. COCTIO SIZ 640QSFCR-4 1/4" SA Seal Cap Core Remover with internal Seal Gasket Core Remover CR O. CR-001 COCTIO SIZ Standard Core Remover Valve Cores VC O. VC-001 COCTIO SIZ Replacement Valve Cores For all 1/4" Access Valves 22
23 Access Valves Refrigerant adapter 88AC O. 88AC-8-2 COCTIO SIZ 1/8" male pipe to SA J2197 Acme threaded male connector Refrigerant adapter 880AC O. 880AC-8-4 COCTIO SIZ 1/4" female SA flare to SA J2197 Acme threaded male connector Refrigerant adapter 881AC O. 881AC-8-4 COCTIO SIZ 1/4" SA male flare to SA J2197 Acme threaded female connector 23
24 Access Valves otes 24
Industrial: Flare Fittings
Industria: Fare Fittings SAE 45 Fare Resists echanica Pu-out eets SAE Functiona Requirements Resists Vibration U isted Inverted Fare Stee ut option Economica U isted Access Vaves Finger Tight Quick Sea
More informationCompression Style Transportation
Compression Style Transportation Air Brake Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Reusable Use with Copper Tubing TA Fittings eets.o.t. FVSS 571.106 eets SAE J246 & J1131 Staked in Tube
More informationVibra-Lok Fittings. Example: 68 VL V 4 2
Vibra-ok Fittings Advantages Vibra-ok provides a positive reliable seal under vibration conditions, mechanical shock or tube movement. The sleeve cushions the tubing permitting the tube to flex back and
More informationHi-Duty Flareless Tube Fittings
Hi-uty Flareless Tube Fittings dvantages zfc10 No flaring, soldering or other preparation of tubing is necessary. Pre-assembled brass fitting, with sleeve machined onto nut. This two piece flareless compression
More informationatalog /USA otes ontrol omponents 2 Parker Hannifin orporation ivision
Section 1 Parker Hannifin orporation ivision atalog 0802-2/USA otes ontrol omponents 2 Parker Hannifin orporation ivision atalog 0802-2/USA Index ontrol omponents Advantages, Assembly, Ordering Information...
More informationBrass Fittings and Valves
Brass Fittings and Valves Catalog 3501E USA January 2004 The World Standard OTSEGO, ICHIGA AKEVIEW, ICHIGA ABIO, IIAA AEASSE, FRACE WARIG FAIURE OR IPROPER SEECTIO OR IPROPER USE OF THE PROUCTS A/OR SYSTES
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of D.O.T. FMVSS 571.106 Meets Dimensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor costs
More informationBRASS FITTINGS (R410a) BRASS FITTINGS
(R410a) R410a Short Barrel Flare Nuts 5010404410A 1/4 $4.21 5010808410A 1/2 $8.52 5010504410A 5/16fl x 1/4 tube $5.73 5011010410A 5/8 $13.50 5010606410A 3/8 $7.08 5011212410A 3/4 $20.54 BRASS FITTINGS
More informationCartridges & Manifolds
Cartridges & Manifolds SAE Encapsulated Cartridge Meets Performance Requirements of.o.t. FMVSS 571.106 Meets Proposed imensional Standards of SAE 2494-4 in 6061-T6 Aluminum Eliminate the space and labor
More informationInstrument Thread Fittings High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More information$1.50 $3.00 U.S. &adaptors chart
$.50 $.00 U.S. &adaptors chart Our trained Quality Assurance Personnel follow a rigid inspection program to ensure that our fittings meet or surpass the strictest requirements of SAE. Quality Assurance
More informationInstrument Thread Fittings. High Technology Valve & Fitting Series
igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size
More informationNeoprene. Steel or Brass
The low air inclusion product line is designed for air conditioning, refrigerant, gaseous and fluid transfer applications. Product Features connections for versatility of installation on tubing or hose
More informationBrass Fittings and Valves
Brass Fittings and Valves Catalog 3501E USA December 1999 The World Standard WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
More informationEasy to assemble Available with long or short nut in wide range of styles and sizes 651 MALE ELBOW 5/16 O.D. TUBE 1/8 PIPE MALE CONNECTOR
A29-1 TM CIC 200 BRASS COMPRESSION TUBE FITTINGS ASSORTMENT P/N 7745 Medium pressure air, oil, water and natural gas applications Manufactured from high density brass alloy No flaring or soldering required
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable ittings and dapter ittings vailable in tube sizes from / to 2 in. and 2 to 50 mm Consistent gaugeability upon initial make-up asy to disconnect and retighten Wide variety of
More informationTrueSeal Thermoplastic Push-In Fittings
True Thermoplastic Push-In Fittings atalog 3501 aterials of onstruction aterial Fitting olor O-Ring P Polypropylene P Fluorocarbon omenclature xample: a4mc4-mg-v a 4 mc ttribute: Fitting body material
More informationBrass Push-Type Fittings. Tube Thread. Part O.D. (M) NPT. No. in. in.
Brass Push-Type Fittings MALE ADAPTER SWIVEL MALE ELBOW 35.0 /8 0-3 35. /8 /6 35.4 /8 /8 35.6 5/3 0-3 35.8 5/3 /8 35.34 5/3 /4 35.40 3/6 0-3 35.4 3/6 /8 35.54 /4 0-3 35.56 /4 /8 35.58 /4 /4 35.6 /4 3/8
More informationSpecializing in DOT Air Brake Parts for Heavy Duty Vehicle 2015 CATALOG 版权所有翻版必究 ALL RIGHTS RESERVED 未经授权禁止转载 UNAUTHORIZED COPY PROHIBIT
Specializing in OT Air Brake Parts for Heavy uty Vehicle 2015 CATAOG www.justinhardware.com (China mainland) www.justinfitting.com (Taiwan) JIH Table of Content Company Profile -----------------------------------------------------------------------------------
More informationINSTRUMENTATION. Tube Fittings. Catalog Number 01-5 November,
INSTRUMNTATION Tube Fittings Catalog Number 0-5 November, 009 www.dklok.com Index Union U Tube to Tube Union Thermocouple Connector MCT Tube to Female Pipe Female Connector CF-N 9,40 Union lbow Union Tee
More informationInstrumentation Thread Fittings
www.superlok.com INDEX ICN 4P IRHB 6P IRSE 8P Close Nipple Reducing Hex Bushing Reducing Street Elbow IHC 6P IME 8P Hex Coupling Male Elbow IHN 4P Hex Nipple IHRC 6P IFT 8P Hex Reducing Coupling Female
More informationNon-Valved Unisex Coupling
SM64019 October 2010 Aerospace Group Conveyance Systems Division Applicable additional manuals: None Carter Brand Ground Fueling Equipment Maintenance Manual Non-Valved Unisex Coupling Model 64019 Model
More informationPneumatic Fittings & Tubing
Pneumatic Fittings & Tubing General Information Fitting escriptions Working Pressure Style Maximum Nominal onstruction pplication ompatible Tubing Poly-Flo 500 PSI 125 PSI Three-piece: body, nut Pneumatic
More informationSKY Refrigeration Brass Fittings. Forged Short Barrel Flare Nuts (Co 2. Forged Long Barrel Flare Nuts (Frost Free & Co 2
Forged Short Barrel Flare Nuts (Co 2 ) 13 SKY Item No. Item Description CO2 Pack qty 201-0404 1/4 SAE Yes 10 201-0504 5/16 SAE X 1/4 Tube Yes 10 201-0505 5/16 SAE Yes 10 201-0606 3/8 SAE Yes 10 201-0808
More informationPipe Fittings. HP Series
Pipe Fittings HP Series Contents Pipe Plug Hollow Hex Plug Close Nipple Special Pipe Nipple Hex Nipple Hex Long Nipple Reducing ushing Pipe Cap Hex Coupling Union all Joints Adaper Male lbow Street lbow
More informationTable Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
More informationPipe Fittings 1/16 to 1 in. sizes 316 stainless steel, brass, and carbon steel NPT, ISO/BSP, and SAE threads
www.swagelok.com Pipe Fittings 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Pipe Fittings Contents Nipples Page 4 dapters, Gaskets Page 6 Reducing ushings, Reducers
More informationProduct warranty. Quality Policy. The Goal
About the Company SEALEXCEL (INDIA) PVT. LTD. is a fast growing manufacturing company in the field of design, development, production and marketing of high quality valves and fittings for international
More informationPhone: Fax: Toll Free: PUMP ACCESSORIES
PUMP ACCESSORIES BALL CHECK VALVES Plainsman Ball Check Valves Reliable, field proven check valves. Metal to metal seats Simple design makes it easy to install and maintain, with only two moving parts
More informationVACUUM AND CHARGING HOSES
VACUUM AND HOSES RECOVERY YELLOW JACKET HVAC&R VACUUM SUPEREVAC AND HOSES YELLOW JACKET PLUS II Charging Hoses Double barrier protection for CFC, HCFC and HFC refrigerants 20 EDITION 62 CATALOG RECOVERY
More informationPipe Fittings. We deliver confidence through quality products
We deliver confidence through quality products INTRODUCTION I ITTINGS SD's recision pipe fittings are designed and manufactured to very stringent tolerances under rigid quality control procedures, to provide
More informationGaugeable Alloy 400 Mechanically Attached Pipe and Tube Fittings
www.swagelok.com Gaugeable Alloy 400 Mechanically Attached and Fittings For use with MIL-T-16420K 70/30 and 90/10 copper-nickel tubing and pipe Excellent corrosion resistance in chloride-containing environments
More information2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More information1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationTubing & Fittings G97. Catalog 9EM-TK-190-5
atalog 9E-TK-90-5 Tubing & Fittings Polyethylene Tubing... 98-99 ylon Tubing... 00-0 Polyurethane Tubing... 02 Push-to-onnect, Prestolok etal Fittings... 04-5 Fittings... 6-2 etric Adapters... 22-23 97
More informationBall Valves. Plug Valves. 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented. 1/8" to 1/4" Pipe Size. Section B. Pneumatic
Ball Valves 1/4" to 2", 2-Way 1/4" to 1", 2-Way Vented Plug Valves 1/8" to 1/4" Pipe Size B Section B Ball Valve Basic Features...2 Ball Valve Part umbers & imensions... 3-4 Plug Valve Basic Features...5
More informationUltraSeal Fittings. Catalog 4245-UltraSeal June 2006
UltraSeal Fittings June 2006 High Purity Components Introduction Parker UHP products are designed as leak-free connections where ultrahigh pure conditions are required. UltraSeal products, with their o-ring
More informationChlorine Valves and Accessories
Chlorine Valves and Accessories Chlorine Cylinder & Ton Container Valves Standard Chlorine Institute Design & Alternate Design 1 ALTERNATE VALVE DESIGN vs. STANDARD CHLORINE INSTITUTE VALVE DESIGN FOR
More informationHigh Pressure Equipment High Pressure Valves, Fittings and Tubing
igh quipment igh Valves, ittings and Tubing 0,000, 40,000 and psi service igh quipment Company has developed a line of igh products to assure safe and easy plumbing for 0,000, 40,000 and psi. These needle
More information82 Series Fittings Table of Contents
Table of Contents ase Part Number with Description Table of Contents (page 1 of 1)... Page Number 30182 Male NPTF Pipe - Rigid Straight... -234 31382 Male NPTF Pipe - Swivel - Straight... -235 30282 Female
More informationJones Stephens Corp. PlumBest LTConnections SECTION D - FITTINGS & VALVES. Brass Compression Fittings
SECTION - FITTINGS & VALVES Brass Compression Fittings... 131-132 Chrome Plated Compression Fittings... 133 45 Flare Tube Fittings... 134-135 Space Heater & Gas Range Fittings... 136 Yellow Brass Pipe
More informationMicroCoat System Operating Manual MC4000 Series MC785M, MC785M-WF Spray Valves
MicroCoat System Operating Manual MC Series MC785M, MC785M-WF Spray Valves A NORDSON COMPANY Introduction The MicroCoat System provides precise lubrication control for metal stamping operations. The MC
More information1 1/4 NPT FILTER SIZE DESIGNATION PRICE 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS HOLE SIZE DESIGNATION PRICE
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
More informationSwagelok Medium-Pressure, Gaugeable Tube Fit tings and Adapte r Fit tings
www.swagelok.com Swagelok Medium-Pressure, Gaugeable Fit tings and dapte r Fit tings For Pre s sure s up to 15 0 0 0 psig (1034 ba r) asy installation, no special tools required ssembly by one full turn
More informationB R E N N A N c a t a l o g
B R E N N A N c a t a l o g $ 15 00 Dear Valued Customer: We are pleased to present our hydraulic tube fitting and adapter catalog. Since 1953, Brennan Industries, Inc. has been supplying hydraulic tube
More informationBRASS HOSE BARBS G21B
BRASS HOSE BARBS For clamshell packaged parts add: PAK to the part number. Eg... G20B-025:PAK, etc. Part Pipe Hose PRICE EACH Pkg Number Size I.D. PAK Loose Std Pkg Qty G2B45 45 MALE NPT HOSE BARB Part
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationMetering Valves Catalog 4170-MV December 2010
Metering alves Catalog 4170-M December 2010 M and L Series Metering alves Catalog 4170-M Introduction The Parker M and L Series of metering valves provide higher flow rates than the S Series of metering
More informationUnisex Couplings, Valved. Model Model SM October Applicable additional manuals: None. Maintenance Manual
SM64020 October 2010 Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment Applicable additional manuals: None Maintenance Manual Unisex Couplings, Valved Model 64020 Model
More informationBRASS BAFFLES TURBO BAFFLES STRAIGHT BAFFLES. Application Machine as shown for both the turbo and straight baffles.
rogressive affles are constructed by precisely silver brazing brass blades to the highest quality forged brass pressure plugs. Turbo affles ease installation and removal, while improving cooling balance
More informationSafety Stations with Eye/Face Wash
Safety Stations with ye/face Wash F G1950 Safety Station with ye/face Wash, Stainless Steel owl pplication: ombination eye/face wash and shower safety station. Two large FS-Plus spray-type outlet heads
More informationREFCO Product Guide by Designation 2016
Vacuum Pumps REFCO Product Guide by Designation 2016 Part No. Designation Description Pg 4674079 2277 Tune-Up Kit 18 4674079 2277 Tune-Up Kit 19 9881562 14142 Fin comb, six sizes in one 69 9881561 14144
More informationWARNINGs! Read all instructions before starting installation of this product! Installing the improper FASS Pump can cause severe engine damage.
WARNINGs! Read all instructions before starting installation of this product! Installing the improper FASS Pump can cause severe engine damage. FASS Recommended Application T F17 150G Powerstroke (6.7L)
More informationREFCO Product Guide by Description 2016
REFCO Product Guide by Description 2016 Part No. Designation Description Pg Vacuum Pumps 9881610 T21018 1 1/8" punch, swaging tool 68 4661601 RL-2 1.35 cfm vacuum pump 12 9881614 T21008 1/2" punch, swaging
More informationAn Installer s Pocket Guide for Swagelok Tube Fittings
www.swagelok.com An Installer s Pocket Guide for Swagelok Fittings 2 CONTENTS Intermixing/Interchanging... 8 Metric Swagelok Fittings... 8 Installation Instructions Safety Precautions... 9 Up to /25 mm
More informationMale - Swivel B-168. Female - Swivel. Female - Swivel B-170. Standpipe. Female - Swivel 90 Elbow - Long 3D082 B-172.
Visual Index 30182-166 31382-166 30282-167 37G82-167 NPTF Pipe Male - Rigid 30382-167 Male - Swivel 30682-168 Female - Rigid 33782-168 NPSM Pipe 33982-168 Gasket Joint 34182-168 JI 37 S Male - Rigid 30482-169
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationPipe Fittings. 1/16 to 1 in. sizes. 316 stainless steel, brass, and carbon steel. NPT, ISO/BSP, and SAE threads.
Pipe Fittings 1 www.swagelok.com Pipe Fittings PIP 1/16 to 1 sizes 316 stainless steel, brass, and carbon steel, /SP, and S threads 2 Weld, VCR, VCO, Pipe, and Vacuum Fittings Contents Nipples Page 4 Crosses
More informationHigh-Flow Stainless Tubes. Standard Tubes BRASS 18 LONG STAINLESS STEEL 18 LONG H11. All stainless construction for high strength and durability
High-Flow Stainless Tubes H11 ll stainless construction for high strength and durability Use with all PCS cascades J in part number indicates next largest thread TUE TUE L = 12 18 24 36 HF093T-.090.076
More informationVCR Metal Gasket Face Seal Fittings
VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,
More informationSM64052 Maintenance & Repair Manual Commercial 2" Unisex Coupling - Valved Model 64052
Aerospace Group Conveyance Systems Division Carter Brand Ground Fueling Equipment SM64052 July 2004 Applicable additional manuals: SM64051 Commercial 2" Unisex Coupling, Non-Valved Maintenance & Repair
More informationTL960 PARTS MANUAL. Fuel Section. Page 9-1. Fuel 09/97
Fuel Section Fuel Page 9-1 Fuel Tank Between The Rails Page 9-2 Fuel Fuel Tank Between The Rail Item Part Num. Number Qty. Description Notes 1 61360662 1 Elbow, 90 o, 1/2" NPT x 5/8" T 2 61270100 1 Sender
More informationLeft: Custom EOAT spring levelers, vacuum fitting and cup assembly. Right: Vacuum fitting and Vacuum cup. Ø D E B VCF1-1032M
Vacuum up Fittings Ideal pplications: utomation assembly fixtures Robotic end effectors nd-of-rm Tooling devices Left: ustom OT spring levelers, vacuum fitting cup assembly. Right: Vacuum fitting Vacuum
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationGaugeable Tube Fittings and Adapter Fittings
www.swagelok.com Gaugeable Fittings and dapter Fittings vailable in tube sizes from / to 2 and 2 to 50 mm Consistent gaugeability upon initial installation asy to disconnect and retighten Wide variety
More informationPneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting air t
Pneumatic Quick ouplings Pneumatics -1 Quick oupling ivision Pneumatics Pneumatic Quick ouplings Single Shut-Off ouplings Single Shut-Off couplings are primarily used for pneumatic applications, connecting
More informationProduct Catalog. Fittings ½ AIR PIPE FITTINGS Fitting, 1/2 Air Pipe End Cap Coupler, with Tank Valve
To complement our extensive line of cable pressurization products, System Studies also sells a variety of air pipe and pressure tube fittings. This section of the catalog describes these commonly used
More informationBRASS FITTINGS and Related Products
Discount Hydraulic Hose.com Cat. BR602 February, 2006 Prices Subject to change BRASS FITTINGS and Related Products Air Brake Fittings: Nylon Tubing 2 Push-In Air Brake Fittings 4 Pre-Assembled Air Brake
More informationVCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels
www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page
More informationTHE LEADING MANUFACTURER OF SMALL VALVES PRODUCT CATALOG VOLUME 50
THE LEADING MANUFACTURER OF SMALL VALVES PRODUCT CATALOG VOLUME 50 A HISTORY MADE IN THE USA INDUSTRY COMPLIANCE Access fittings manufactured and sold by C&D Valve meet ARI Standard 720-2002 and are manufactured
More informationD. S. HULL COMPANY, INC
PVC Slip x Female Pipe Adapters Mfg Slip Female Pipe 235736 435-005 1/2 1/2 $0.81 235747 435-007 3/4 3/4 $1.03 235758 435-010 1 1 $1.18 235769 435-012 1-1/4 1-1/4 $1.84 235770 435-015 1-1/2 1-1/2 $2.11
More informationTube. Flared I.D. Flared I.D. can prevent the tubing from deforming inwards. Specifications
Self-align Fittings Series H, D,, Flared ridge ferrule Prevents accidental loss of ferrule when inserting tubing into the fitting body. Hardened ridge ferrule Prevents breakage of ferrule when tightening
More informationAIR/HYDRAULIC INJECTION GUN MODEL INSTRUCTIONS
I. OPERATION & DESCRIPTION The Air / Hydraulic Injection Gun is a high-pressure tool that should be used with caution and according to these instructions. IMPORTANT: The Gun is 0,000 psi rated. Do not
More informationINERGEN. 150-BAR SYSTEMS Design, Installation, Recharge, and Maintenance Manual
INERGEN 150-BAR SYSTEMS Design, Installation, Recharge, and Maintenance Manual REVISION RECORD 3-1-06 REV. 10 Page 1 DATE PAGE REV. NO. DATE PAGE REV. NO. 4-1-94 6-5 1 6-1-94 6-17 1 6-1-94 Appendix Orifice
More informationHAM-LET PRECISION INSTRUMENT PIPE FITTINGS
HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured
More informationTable of Contents. Page. See Catalog and Product Updates on our Website
2 Table of Contents Page Sapphire Orifice Assemblies... 3-5 Metal Orifice Assemblies - Barb Connections... 6-7 Metal Orifice Assemblies - NPT Connections... 8-9 Metal Orifice Assemblies - Inserts... 10-13
More informationLOKRING Automotive Service Connectors For the Automotive AC Field
Local Distributor: LOKRING Automotive Service Connectors For the Automotive AC Field American LOKRING Corporation 2525 Dundee Road Winter Haven, FL 33884 863-325-9262 www.lokringusa.com FX-863-324-8626
More informationBRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING
BRASS OVERVIEW REUSABLE HOSE FITTINGS FRAME FITTINGS - STEEL TERMINAL BOLTS DOT AIR BRAKE FITTINGS - NYLON TUBING DOT AIR BRAKE FITTINGS - COPPER TUBING DOT PUSH LOCK FITTINGS - NYLON TUBING DOT COMPOSITE
More informationFluid Flow Components Composantes pour un monde fluide
6011 Fluid Flow Components Composantes pour un monde fluide Vancouver Edmonton Winnipeg Toronto Montreal Moncton Product Index BRASS FITTINGS Page Carded...45-46 Closet Bolt...42 Compression...9-12 Compression
More informationHVAC/R. Australia New Zealand Edition
HVAC/R Australia New Zealand Edition 2011 2012 MANIFOLDS 481CKPC 400 Series Deluxe 2 Valve Brass Manifold 580CKPSC 680CKPSC 513CC Dual O ring Valve seals and Soft Seat Valves Precision engineered with
More informationPlumbing. Controls, Drains, Piping, Flanges, Couplings, Caps and Plugs
Plumbing Hale offers a wide variety of plumbing components to make the pump installation and operation easier for the OEM and End User. Hale controls allow for a clean and compact pump panel. Controls
More informationCPV Manufacturing O-SEAL and Mark VIII Valves and Fittings
CPV Manufacturing O-SEAL and Mark VIII Valves and Fittings January, 2017 503 Schoolhouse Road, Kennett Square, P: 215-386-6508 PA 19348 P: 215-386-6508 www.cpvmfg.com F: 215-387-9043 www.cpvmfg.com CPV
More informationHANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1
HANDBOOK Ed. 2017 AT-ED 01/2017 - ENG 1 CHAPTER 3 ACCESS FITTINGS AND VALVE CORES FOR REFRIGERATION PLANTS THAT USE HCFC, HFC, HC, HFO, OR R744 REFRIGERANTS APPLICATIONS The access fittings illustrated
More informationSafety Stations with Eyewash
Safety Stations with yewash F G1942 Safety Station with yewash, Freeze and Scald Protection Valves pplication: ombination eyewash and shower safety station. Unit is furnished with temperature-actuated
More informationFig Variable Speed Valve Parts
5 DISASSEMBLY OF VARIABLE SPEED CONTROL VALVE (Seal Replacement with Control Valve in the Bobcat). Remove seat and seat plate (Fig. ).. Remove variable speed control lever linkage rod. 3. Remove temperature
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity
More informationParts List. Item # Part # # Reqd. Description
5.2017.6.f 1 3800 Series Injector 1 2 3 4 5 6 7 21 8 9 20 10 11 12 19 18 17 16 15 14 13 Parts List Item # Part # # Reqd. Description 1 A-0664 1 5 Gallon 430 Reservoir 2 A-0575 1 Thumb Screw 3 A-0172 1
More informationWEIGHT (lb) PART NO WITH ACCESS CONNECTION (ODS) BALL PORT DIAMETER WA WAS
SUPERIOR - BALL VALVES WA SERIES (WELDED) WAS Series (Welded with Access Fittings) Full Service Temperature Range of -40 F to +325 F. Forged Brass Body and Seal Cap. Design Working Pressure: 700 psig.
More informationCAPS & CONNECTORS. Rubber Caps (Special Heat Resistant EPDM Rubber) Ford - GM - Chrysler NYLON CONNECTORS
Sec.1 Sec. 10 CAPS & CONNECTORS Vinyl Vacuum Caps Can be used for capping lines and hoses while testing carburetors, emission control systems, vacuum lines etc. Color coded for size identification. Fits
More informationBRUTE II 4-VALVE Manifold
gauges Leak Detectors Detectors 20 BRUTE II 4-VALVE Manifold The Brute II 4-Valve Test Charging Manifold provides the flow that s proven faster than any conventional manifold. The aluminum alloy is forged
More informationHERMETIC VALVES APPLICATIONS
Valves HERMETIC VALVES APPLICATIONS The hermetic valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97/23/EC, Article 1, Section 2.1.4 and
More informationMrPEX 1 ¼ Stainless Steel Manifold. Installation Guide
MrPEX 1 ¼ Stainless Steel Manifold Installation Guide Design MrPEX 1 ¼ Stainless Steel Manifold is made from high quality stainless steel, and is offered in 2 through 12 loop configurations. The manifold
More informationSeries HB Solid Brass Cylinders
Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity
More informationEdition 1
RAYPEX 800-628-5044 Edition 1 RELATIVE ORDER OF RESISTANCE TO GAS PENETRATION Impurity levels after six hours of flushing with helium 4.5 (100 1/h) Moisture (H20) Oxygen (O2) 1. Stainless Steel 1-2 ppm
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationPage 1 of 19. Part# /10/2006
Part# 1002733-01 10/10/2006 This manual contains important information concerning the installation and operation of the gun washers listed above. Read manual thoroughly and keep for future reference INSTRUCTIONS
More informationCOMPRESSION TUBE FITTINGS PRODUCT CATALOG UNIQUE FITTINGS MOLDED FROM FOUR CORROSION-RESISTANT THERMORESINS
COMPRESSION TUBE FITTINGS PRODUCT CATALOG UNIQUE FITTINGS MOLDED FROM FOUR CORROSION-RESISTANT THERMORESINS Plastic Fittings That Revolutionized The Techniques of Connecting Tubes. understands the needs
More informationSec. 11 NYLON CONNECTORS
Sec. 11 NYLON CONNECTORS 12946 Connector 5/16" x 5/16" 1/8 1/8 12916 12919 12921 12938 Connector 3/8" x 1/4" 1/8 12924 1/4" 12934 Connector 3/8" x 3/8" 18835 (E1ZE-9E499-EA) Nylon 1/8 12926 17629 12922
More informationMade in USA. Unilok. Tube Fittings. QUALITY INSTRUMENTATION FITTINGS
Unilok Tube Fittings Made in USA www.sspfittings.com QUALITY INSTRUMENTATION FITTINGS SSP Fittings Corp. / SSP Instrumentation Table of Contents How to Order...3 Tube Fittings Selection Guide... 4-6 Unilok
More informationApplicable tube O.D. ø3.2, ø4, ø6 Thread M3, M5, R(PT) 1/8 Series KJ. Applicable Tubing. Tube materterial Tube O.D. Specifications
iniature One-touch Fittings One-touch ini pplicable tube O.D. ø, ø, ø,, R(P) 1/ Series KJ Guide 1 Guide Chuck ccepts nylon and polyurethane tubes. as large retaining force. Release button (ight gray) Small
More information