CPV Manufacturing O-SEAL and Mark VIII Valves and Fittings

Transcription

1 CPV Manufacturing O-SEAL and Mark VIII Valves and Fittings January, Schoolhouse Road, Kennett Square, P: PA P: F:

2 CPV Manufacturing has produced valves and fi ttings for over a century. While successes throughout our long history have opened doors to new possibilities, we have maintained absolute focus on the core products that have made this company what it is today. Today, you will fi nd CPV valves and fi ttings across a wide spectrum of industries, including oil and gas, food, pharmaceutical, chemical, pulp and paper, and even the United States Navy. Since 1950, CPV s highly engineered valves have been used by the U.S. Navy for both standard and highly customized applications. While the principle of maintaining the highest possible quality of a few core products has been central to CPV s day-to-day work and larger development, it s not the only one that s guided our success. We place equal importance on beginning every design challenge with a complete picture of our client s needs and expectations, going beyond one size doesn t fi t all. We take the time to understand exactly how our products will be applied, and incorporate that information from the initial designs to the manufacturing process. For more information on how CPV Manufacturing can help your business, contact us at sales@cpvmfg.com Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted F: Worldwide

3 Table of Contents O-SEAL Valves...5 Check Valves...7 Relief Valves...8 OXNB Valves...10 Fittings...12 Union Nut...12 Tailpieces...13 Threadpieces...17 Tools & Maintenance...22 Valve Spacers...22 Valve Flush Plugs...22 Stem Seal Tools...23 Soft Goods Kits...24 Mark VIII Valve...27 Fittings...29 Tube...30 Tailpieces...30 Union Assemblies...31 Elbow Assemblies...35 Tee Assemblies...37 Cross Assembly & Etc Pipe...41 Tailpiece...41 Union Assemblies...41 Elbow Assemblies...44 Tee Assemblies...46 Cross Assembly Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, Kennett PA Square, PA P: P: F: P:

4 O-SEAL A full line of soft-seated valve and separable fittings for positive control of high-pressure liquids and gases. Quick, easy, leak-proof performance from vacuum up to 6000 PSI (414 bar) Full line of shutoff valves, check valves, relief valves, unions, and fi ttings Standard High Tensile Bronze body and Viton O-ring; other materials such as Naval Brass, 300 Series Stainless Steel, and Monel are available, as well as EPDM and Buna-N O-Rings Soft seats for bubble-tight performance, even with elusive gases like hydrogen and helium O-SEAL valves can be quickly removed or reinstalled in-line, and have replaceable seats and cartridges Mix-and-match tailpieces and threadpieces to create a variety of connections Please note for colored diagrams: Union nuts will be shown in orange. Tailpieces will be shown in purple. Threaded bodies and fi ttings will be shown in blue Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted F: Worldwide

5 O-SEAL Connection Valves O-SEAL - Valves Cartridge Only (X65) Weld Globe Valve (X70) Weld Angle Valve (X71) Globe Valve (X80) Angle Valve (X81) Offset Valve (X82) Shutoff (3XX) Needle (4XX) Stop- Check (5XX) Check (6XX) Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

6 O-SEAL Connection Valves O-SEAL - Valves Globe Angle Offset *Centerline of the valve stem in and Globe Valves is angled at approximately 13 from the perpeindicular to the piping. Drawing upon request. Dimensions also valid for Needle (4XX) and Stop-Check (5XX) valves Welded Globe Welded Angle 6 * When ordering, please indicate the specifi c PIPE SIZE or TUBE SIZE in addition to the catalogue number. e.g., Globe Shutoff Valve for 1/2 NPS e.g., Globe Shutoff Valve for 3/4 O.D. Tube Dimensions also valid for Needle (4XX) and Stop-Check (5XX) valves. 503 Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

7 O-SEAL Check Valves All O-SEAL check valves are spring-actuated, effectively eliminating pressure surges and reverse fl ow associated with swing checks All O-SEAL check valves offer the same body styles and bubble-tight seal found in O-SEAL hand valves. Check valve cartridges can be swapped into existing shutoff, needle, or stop-check bodies. The 123A model features a compact in-line body and bubble-tight seal. Can be installed in vertical, horizontal, or diagonal orientation. Working pressure up to 6000 PSI (414 bar). Standard temperature from -20 F to 225 F (29 C to 107 C). An option is availble for temperatures up to 400 F (204 C). Please consult customer service for more information. O-SEAL - Check Valves 123A - In-Line Check *When a 1/8 or 1/4 Pipe Size In-Line Check Valve is required, order Catalogue No. 123A-2 with appropriate reducing tailpieces for 1/8 or 1/4 Pipe Size Globe Check 123A - In-line NOTE: To order a check valve with a different body, substitute the applicable 2-digit end code to create a catalogue number. For example: Angle: 681 Offset: 682 Weld Globe: 670 Weld Angle: Globe Please reference the previous page (6) to review Dimension A for the various body styles; all standard for hand and check valves Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

8 O-SEAL Relief Valves O-SEAL - Relief Valves Application High pressure hydraulic systems High pressure pumping systems High and low pressure tanks High pressure piping systems High pressure test systems Features Wide range of options to relieve high or over pressure. Sensitive spring adjustment permits accurate control of the blowdown pressure setting Guided lift and the energized poppet seal design assure positive, leakproof reseating every time O-SEAL union connections providing exceptional adaptability Pressure ratings from vacuum up to 6000 PSI (414 bar) Temperature ranges (dependant on elastomer) between -70 F and 400 F (29 C to 107 C) Soft seated for bubble-tight performance Models 157A offers a full-size body with increased fl ow capacity 158 uses a compact body where clearance is a concern Materials Body: High Tensile Bronze Poppet: 300 Series Stainless Steel Seat Assembly: 300 Series Stainless Steel Sleeve: High Tensile Bronze Spring: Pretempered Alloy Steel Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

9 O-SEAL Relief Valves O-SEAL - Relief Valves *Discharge capacities are computed for set pressure plus accumulation (or overpressure) shown in tables with air and water at ambient conditions. Notes: 1. Formulas used to calculate capacities are derived from API Recommended Practice 520 and ASTM F Relief Valve Standards: Set Pressure Tolerance: ±2% Reseat (Blowdown) Pressure Tolerance: -7% 157A *Discharge capacities are computed for set pressure plus accumulation (or overpressure) shown in tables with air and water at ambient conditions. Notes: 1. Formulas used to calculate capacities are derived from API Recommended Practice 520 and ASTM F Relief Valve Standards: Set Pressure Tolerance: ±2% Reseat (Blowdown) Pressure Tolerance: -7% Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

10 O-SEAL Naval Brass Oxygen Valves O-SEAL - OXNB Valves The new CPV OXNB High Pressure Valve is optimized for critical requirements of oxygen service, including fi ll plants, high pressure manifolds, and various other piping system applications. The new oxygen-service brass valve design utilizes the same reliable sealing method as CPV s standard O-SEAL Series valves which have been used throughout the industrial gas industry for more than 75 years. Features Oxygen compatible Size ranges between 1/8 and 1 pipe size Rising stem design Low operating torque Standard panel mount design Standard vacuum service design Canadian registered valves - CRN approved IAW ASME B31.3 IAW ASME B16.34 Reliable bubble-tight, leak free operation Pressure-bound materials of construction IAW ASME B31.3 Pressure rating of 4,000 PSI Full replacement or factory rebuild of valve recommended Component Body, Bonnet, Retainer, Stem Retainer, Panel Nut Stem Assembly Guide Assembly (-2 through -5 sizes) Disc (Seal) O-Rings and Stem Seal Seat Ring Back-up Ring, Gasket Material Naval Brass ASTM B283/ASTM B21 Monel NiCu ASTM B164 CuNi ASTM B466 Vespel SP-21 Viton Fluorocarbon Type 1, Class 2 (90 durometer) Copper Tefl on PTFE Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

11 O-SEAL Naval Brass Oxygen Valves O-SEAL - OXNB Valves Globe Style Hand Valve Globe Style Check Valve Globe Style Pneumatic Actuated Valve Notes: 1. All dimensions listed are in inches. 2. When ordering, be sure to include Union Nuts, Catalogue No. 50N, and proper tailpieces from the O-Seal Fittings section of this catalogue (page 13). 503 Schoolhouse Road, Kennett Square, P: PA P: F:

12 O-SEAL Fittings O-SEAL - Fittings Application Piping systems Aerospace Compressed Gas Drilling Petrochemical Refi ning Shipbuilding Features Most effective and reliable connection for controlling high pressure liquids and gases Unique union O-ring face seal design ensures maximum reliability and optimum fl exibility for all your system needs Pressure ratings up to and exceeding 6000 PSI (414 bar) Temperature ranges (dependant on elastomer) between -70 F and 400 F (29 C to 107 C) Line sizes range from 1/8 up to 2.50 pipe size (tube and metric sizes as well) Flexible break-remake self-sealing connections Low torque assembly Can be used with standard O-SEAL and G-Series valves Various connection orientations, types, and materials 50N - Union Nut Common Materials 300 Series Stainless Steel Monel Naval Brass High Tensile Bronze Carbon Steel Other materials are available. Please consult customer service. O-SEAL Fitting Assemblies come standard with Viton O-Ring, unless otherwise specifi ed Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

13 O-SEAL Fittings Tailpieces* *Tailpieces come standard with Viton O-Ring, unless otherwise specifi ed. 51R - Socketweld O-SEAL - Tailpieces Reducing Fittings are available. Please contact customer service. 58R - Buttweld *C, bore corresponds to pipe schedule. Please specify pipe schedule when ordering. 62R - Male Pipe Weld Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

14 O-SEAL Fittings Tailpieces O-SEAL - Tailpieces 52R - Socket Braze Reducing Fittings are available. Please contact customer service. Preinserted silver brazing ring(s) are normally furnished. When ordering, state grade desired. Number of braze grooves varies with size: 1/8-1/2 : 2 grooves; 3/4-2 : 1 groove. 48R - Socketweld Tube Reducing Fittings are available. Please contact customer service. 63R - Male Tube Weld Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

15 O-SEAL Fittings Tailpieces 53R - Female Pipe Thread O-SEAL - Tailpieces Reducing Fittings are available. Please contact customer service. 54R - Male Pipe Thread Reducing Fittings are available. Please contact customer service. 104R - Blank Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

16 O-SEAL Fittings Tailpieces O-SEAL - Tailpieces 59R - Male Straight Thread Reducing Fittings are available. Please contact customer service. 64R - Female Straight Thread Further Reducing Fittings are available. Please contact customer service Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

17 O-SEAL Fittings Threadpieces 51T - Socketweld O-SEAL - Threadpieces Reducing Fittings are available. Please contact customer service. 58T - Buttweld *C, bore, corresponds to pipe schedule. Please specify pipe schedule when ordering. 62T - Male Pipe Weld Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

18 O-SEAL Fittings Threadpieces O-SEAL - Threadpieces 52T - Socket Braze Reducing Fittings are available. Please contact customer service. Preinserted silver brazing ring(s) are normally furnished. When ordering state grade desired. Number of braze grooves varies with size: 1/8-1/2 : 2 grooves; 3/4-2 : 1 groove. 48T - Socketweld Tube Reducing Fittings are available. Please contact customer service. 63T - Male Tube Weld Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

19 O-SEAL Fittings Threadpieces 53T - Female Pipe Thread O-SEAL - Threadpieces Reducing Fittings are available. Please contact customer service. 54T - Male Pipe Thread Reducing Fittings are available. Please contact customer service. 104T - Blank Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

20 O-SEAL Fittings Threadpieces O-SEAL - Threadpieces 59T - Male Straight Thread Reducing Fittings are available. Please contact customer service. 64T - Female Straight Thread Reducing Fittings are available. Please contact customer service. 89T - Bulkhead 20 Jam nut is furnished with bulkhead fi tting. Maximum Panel Thickness: -0 through -4 sizes: 0.38 thick; -5 through -8 sizes: 0.50 thick. Panel Bore Diameter: -0 through -3 sizes: to be larger than B-Thread diameter; -4 through -8 sizes: to be larger than B-Thread diameter. 503 Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

21 O-SEAL Fittings Threadpieces 40 - Tee O-SEAL - Threadpieces 41/42 - Elbow (90 and 45 ) 43 - Cross Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

22 O-SEAL Tools & Maintenance O-SEAL - Tools & Maintenance Valve Spacers CPV Valve Spacers are the exact face-to-face dimension of CPV O-SEAL valves. They can be used to protect valves during installation, and can be reused again and again for maintenance operations. CPV O-SEAL valves provide years of reliable service. However, the heat of welding or brazing during installation can compromise the cleanliness and/or integrity of the O-SEAL valve. Using CPV s hollow core valve spacers enables users to avoid that risk. These spacers replicate the exact face-to-face dimension of the O-SEAL valve being installed. After welding or brazing has taken place, the entire system can be fl ushed. The spacer is then slipped out and the valve slipped in. Users are thus assured of both a perfect fi t and a leakproof connection for years to come. Moreover, once the O-SEAL Valve is in service, the valve spacer can be saved and re-used over and over again. For example, if fl ushing the system could cause problems or contaminate the O-SEAL Valves, users simply slip the valves out and slip the spacers in. To order, enter the letter F in front of the catalogue number for the CPV O-SEAL valve you are installing. Be sure to specify the complete catalog number for each spacer you wish to order, including the size code or dash number. For example: F (spacer for Globe Valve No , size 1/2 ) F (spacer for Angle Valve No , size 3/4 ) F-123A-5 (spacer for Check Valve No. 123A-5, size 1 ) Valve Flush Plugs If one section of a piping system needs to be altered, cleaned or fl ushed, CPV O-SEAL Flush Plugs can be used to protect the rest of a system from contamination. Simply remove the valve cartridge and insert the appropriate Flush Plugs into the O-SEAL valve bodies at either end of the affected area and the rest of the system will be totally cut off from the cleaning or fl ushing process. There are three types of fl ush plugs available: Under-Seat, Over-Seat, and Flow-thru. As can be seen in the schematic drawings, the Over-Seat and Under-Seat have threaded connections in the top of the plug for trouble-free connection to the fl ushing pump. The Flow-Thru Plugs are intended for insertion in valves located in the middle of the section being fl ushed or cleaned. Once installed, these plugs allow the fl ush to fl ow through without contaminating the O-SEAL valve cartridges. When these valve bodies are equipped with O-SEAL Flush Plugs, future system expansion or section fl ushing will be much easier Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

23 Soft Goods Kits In the event that the sealing elements used in an O-SEAL system valve ever need replacement, a soft goods kit can be obtained containing all four of the items required. To order a soft goods kit, determine the proper material grouping shown across the top of the chart below. Read down the column and select the Kit Number on the horizon line matching the valve size or Dash Number. For example: A 1/2 in Globe valve requires a soft goods kit. The valve is used in compressor air service, and the compressor is lubricated with a petroleum-based oil. The materials listed in the fi rst column under Material Grouping are satisfactory for this service. Continue down this column to the line for Dash No. -3 (1/2 in. pipe size) to determine that the Kit Number is O-SEAL - Tools & Maintenance *DuPont registered trademark Schoolhouse 503 Schoolhouse Road, Kennett Road, Square, P: Kennett PA Square, PA P: P: F:

24 Stem Seal Tools O-SEAL - Tools & Maintenance Every new CPV O-SEAL valve provides leakproof assurance to 6000 PSI (414 bar). Properly maintained they should provide long, reliable service. The stem seals are made of polyurethane, Viton, ethylene propylene, etc. and should be inspected at appropriate intervals depending on system conditions and frequency of use. To maintain CPV s leakproof standard after stem seal replacement, the U cup installation tool developed by CPV should be used. This tool is inexpensive, easy to use, and enables users to replace a stem seal in less than a minute. By compressing the outer sealing lip and expanding the inner lip, the kit makes it easy to slip the U cup stem seal over the valve stem. Once the stem seal is properly installed on the valve stem, it can be easily inserted into the bonnet gland and secured without damaging the critical edges of the seal. A CPV Replacement Soft Goods Kit can also be ordered in the pipe size and soft goods material specifi ed for the user s application. This kit contains one of each: stem seal, body O-ring, back-up ring, and seat O-ring. The CPV U Cup Installation Tool can be used on O-SEAL Shutoff, Needle, or Stop- Check valve cartridges. The relevant catalogue numbers are as follows: Shutoff: 365, 370, 371, 380, 381, and 382 Needle: 465, 470, 471, 480, 481, and 482 Stop-Check: 565, 570, 571, 580, 581, and 582 For information on how to install the U cup stem seal, please see page Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Trusted Worldwide Worldwide F:

25 How to Install U Cup Stem Seals in CPV O-SEAL System Valves O-SEAL - Tools & Maintenance 1. Insert items A and C onto item B. 2. With the sealing lips facing away from the tool, slide the U cup over the taper on item A. 3. Continue to press the U cup over item A until the cup is stopped by the shoulder of item B. At the same time, pull up on item C until it covers the U cup. 4. Remove item A. 5. Invert items B and C with the U cup. Slip the tool assembly over the valve stem and into the bonnet gland. 6. Hold down item C while removing item B. 7. Insert item D. 8. Press down on item D to seat the U cup in the gland. Remove tool assembly Schoolhouse Road, Kennett Square, American P: PA Engineering P: Trusted Worldwide F:

26 Mark VIII Mark VIII offers a vast array of tube fittings, with an affordable streamlined design. High pressure leak-proof reliability, especially in systems with ambient vibration and cyclic stresses Flat-faced O-ring seals allow for: - Quick make/break connections with low tightening torques - Slip-in and slip-out of components and fi ttings - Joint will not vibrate loose or need retightening when properly torqued Reducing tailpieces and reducing inserts can be combined to create unique solutions Valve pressure ratings up to 3,000 PSI; fi ttings up to 6,000 PSI Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted F: Worldwide

27 Mark VIII Valve Mark VIII - Valve Inline Angle NOTE: Replace the S with an N to order a Regulating (Needle) valve. See Valve Type Confi gurations on the next page. NOTE: Order Sil-Braze rings (H801) separately. See the Sil-Braze ring chart on the next page Schoolhouse Road, Kennett Square, P: PA P: F:

28 Mark VIII Valve Mark VIII - Valves Valve Types Sealing Disc Configurations Shutoff Regulating Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

29 Mark VIII Fittings Application Piping systems Aerospace Compressed Gas Drilling Petrochemical Refi ning Shipbuilding Features Excellent for vacuum service and high purity gases Temperature ranges (dependant on elastomer) between -70 F and 400 F (29 C to 107 C) Line sizes range from 1/8 up to 2 tube size (pipe sizes available as well) Tailpieces can be used with standard Mark VIII and G-Series M8 valves Socket-weld, male NPT, and female NPT pipe sizes available as well Mark VIII Union Assemblies come standard with Viton O-Ring, unless otherwise specifi ed. Standard Materials Union Nut: 316 Stainless Steel Tailpiece and Threadpiece: 316L Stainless Steel Other Material Options (contact customer service) Monel (NiCu) Naval Brass Carbon Steel High Tensile Bronze (union nut only) Copper-Nickel (tailpieces only) Mark VIII - Fittings H850N - Union Nut Schoolhouse Road, Kennett Square, P: PA P: F:

30 Mark VIII Tube Fittings Mark VIII - Tube Tailpieces Tailpieces H849R - Socketweld/braze Tube Tailpiece NOTE: Order Sil-Braze rings (H801) separately. For more information, see page 25. H863R - Male Tube Weld Tailpiece *For welding or brazing into a socket. H804R - Blank Tailpiece Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

31 Mark VIII Tube Fittings Union Assemblies* *Unions come standard with Viton O-Ring, unless otherwise specifi ed. H849 - Socketweld Tube Union Assembly Mark VIII - Tube Union Assemblies Reducing and Increasing Union Assemblies are available. Please contact customer service. Reducing Tailpiece Example For the tailpiece (underlined in red): A double dash number indicates a reducer. The fi rst dash number must agree with the dash number for the union nut. The second dash number represents the tube size. Note: There is no reducing tailpiece chart in this catalogue. For specifi c reducing tailpiece requests, please contact customer service Schoolhouse Road, Kennett Square, P: PA P: F:

32 Mark VIII Tube Fittings Union Assemblies Mark VIII - Tube Union Assemblies H854 - Tube to Male Pipe Thread Union Assembly H853 - Tube to Female Pipe Thread Union Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. 32 Reducing and Increasing Union Assemblies are available. Please contact customer service. 503 Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

33 Mark VIII Tube Fittings Union Assemblies H859 - Tube to Male Straight Thread Union Assembly Mark VIII - Tube Union Assemblies Reducing and Increasing Union Assemblies are available. Please contact customer service. H864 - Tube to Female Straight Thread Union Assembly Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, P: PA P: F:

34 Mark VIII Tube Fittings Union Assemblies Mark VIII - Tube Union Assemblies H890 - Socketweld Tube Bulkhead Union Assembly *Panel Thickness: Maximum - 1/2 ; Minimum - 1/16. Reducing Union Assemblies are available. Please contact customer service. H863 - Socketweld Tube to Male Tube Union Assembly *For welding or brazing into a socket. Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

35 Mark VIII Tube Fittings Elbow Assemblies H820 - Socketweld Tube Elbow Assembly Mark VIII - Tube Elbow Assemblies H821 - Tube to Male Pipe Thread Elbow Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, P: PA P: F:

36 Mark VIII Tube Fittings Elbow Assemblies Mark VIII - Tube Elbow Assemblies H822 - Tube to Female Pipe Thread Elbow Assembly H823 - Tube to Male Straight Thread Elbow Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. 36 Reducing and Increasing Union Assemblies are available. Please contact customer service. 503 Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

37 Mark VIII Tube Fittings Tee Assemblies H810 - Socketweld Tube Tee Assembly Mark VIII - Tube Tee Assemblies Various Reducing and Increasing Union Assemblies are available. The Tube O.D. sizes of A, A, and A can be requested for a specifi c size; i.e., H , H , H , etc. Please contact customer service for other size options. H811 - Tube to Male Pipe Thread Branch Tee Assembly Various Reducing and Increasing Union Assemblies are available. The Tube O.D. sizes of A and A can be requested for a specifi c size; i.e., H , H , H , etc. Please contact customer service for other size options. 503 Schoolhouse Road, Kennett Square, P: PA P: F:

38 Mark VIII Tube Fittings Tee Assemblies Mark VIII - Tube Tee Assemblies H812 - Tube to Male Pipe Thread Run Tee Assembly Various Reducing and Increasing Union Assemblies are available. The Tube O.D. sizes of A and A can be requested for a specifi c size; i.e., H , H , H , etc. Please contact customer service for other size options. H813 - Tube to Female Pipe Thread Branch Tee Assembly Various Reducing and Increasing Union Assemblies are available. The Tube O.D. sizes of A and A can be requested for a specifi c size; i.e., H , H , H , etc. Please contact customer service for other size options Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

39 Mark VIII Tube Fittings Tee Assemblies H814 - Tube to Female Pipe Thread Run Tee Assembly Mark VIII - Tube Tee Assemblies H815 - Tube to Male Straight Thread Branch Tee Assembly Various Reducing and Increasing Union Assemblies are available. The Tube O.D. sizes of A and A can be requested for a specifi c size; i.e., H , H , H , etc. Please contact customer service for other size options. H816 - Tube to Male Straight Thread Run Tee Assembly Various Reducing and Increasing Union Assemblies are available. The Tube O.D. sizes of A and A can be requested for a specifi c size; i.e., H , H , H , etc. Please contact customer service for other size options. Various Reducing and Increasing Union Assemblies are available. The Tube O.D. sizes of A and A can be requested for a specifi c size; i.e., H , H , H , etc. Please contact customer service for other size options. 503 Schoolhouse Road, Kennett Square, P: PA P: F:

40 Mark VIII Tube Fittings Cross Assembly Mark VIII - Tube Cross Assembly & Etc. H809 - Socketweld Tube Cross Assembly Various Reducing and Increasing Union Assemblies are available. The Tube O.D. sizes of A can be requested for 4 different sizes; i.e., H , H , H , etc. Please contact customer service for other size options. Assorted Pieces H804T - Blank Threadpiece H805 - Straight Thread Plug Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

41 Mark VIII Pipe Fittings Tailpiece H851R - Socketweld Pipe Tailpiece Mark VIII - Pipe Fittings Union Assemblies H749 - Socketweld Pipe Union Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, P: PA P: F:

42 Mark VIII Pipe Fittings Union Assemblies Mark VIII - Pipe Union Assemblies H754 - Pipe to Male Pipe Thread Union Assembly H753 - Pipe to Female Pipe Thread Union Assembly Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

43 Mark VIII Pipe Fittings Union Assemblies H759 - Pipe to Male Straight Thread Union Assembly Mark VIII - Pipe Union Assemblies H764 - Pipe to Female Straight Thread Union Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. H790 - Socketweld Pipe Bulkhead Union Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. *Panel Thickness: Maximum - 1/2 ; Minimum - 1/6. Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, P: PA P: F:

44 Mark VIII Pipe Fittings Elbow Assemblies Mark VIII - Pipe Elbow Assemblies H720 - Socketweld Pipe Elbow Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. H721 - Pipe to Male Pipe Thread Elbow Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

45 Mark VIII Pipe Fittings Elbow Assemblies H722 - Pipe to Female Pipe Thread Elbow Assembly Mark VIII - Pipe Elbow Assemblies Reducing and Increasing Union Assemblies are available. Please contact customer service. H723 - Pipe to Male Straight Thread Elbow Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, P: PA P: F:

46 Mark VIII Pipe Fittings Tee Assemblies Mark VIII - Pipe Tee Assemblies H710 - Socketweld Pipe Tee Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. H711 - Pipe to Male Pipe Thread Branch Tee Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

47 Mark VIII Pipe Fittings Tee Assemblies H712 - Pipe to Male Pipe Thread Run Tee Assembly Mark VIII - Pipe Tee Assemblies Reducing and Increasing Union Assemblies are available. Please contact customer service. H713 - Pipe to Female Pipe Thread Branch Tee Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, P: PA P: F:

48 Mark VIII Pipe Fittings Tee Assemblies Mark VIII - Pipe Tee Assemblies H714 - Pipe to Male Pipe Thread Run Tee Assembly H715 - Pipe to Male Straight Thread Branch Tee Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

49 Mark VIII Pipe Fittings Tee Assemblies H716 - Pipe to Male Straight Thread Run Tee Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service. Mark VIII - Pipe Tee & Cross Assemblies Cross Assemblies H709 - Socketweld Pipe Cross Assembly Reducing and Increasing Union Assemblies are available. Please contact customer service Schoolhouse Road, Kennett Square, P: PA P: F:

50 G-Series Simplified and compact version of our proven soft-seat design provides reliable heavy-duty service and long life. Manufactured with permanent soft seats (sealing disc) to provide years of bubble tight shutoff for applications requiring long term dependability All G-Series valves have the advantage of large fl ow areas and construction of wetted parts in 316 Stainless Steel A full line of shutoff, needle, and check valves Six common orifi ce sizes ranging from.219 to.813 Pressure ratings from vacuum to 6,000 PSI (414 bar) Temperature ratings (dependent on elastomer) between -70 F and 400 F (29 C to 107 C) Standard panel mount confi guration with a replaceable valve cartridge Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted F: Worldwide

51 G-Series Ordering Information G-Series - Ordering Information **Where two materials are listed, the fi rst material is the Stem Seal and the second material is the O-Ring. Valve Types Sealing Disc Configurations Shutoff Needle Check Fully contained soft seat Flat seated for extended wear Bubble tight performance Soft seated - bubble tight Tapered plug for excellent fl ow control Full fl ow capability Fully ported Soft seated Spring actuated Schoolhouse Road, Kennett Square, P: PA P: F:

52 G-Series Valves PF End Connection Female Pipe Thread (NPT) G-Series - Valves Note: Replace the third digit, S with an N to order a Needle valve. Example: G2NGPS-06-C Note: Replace the third digit, S with a C to order a Check valve. Example: G2CGPS-06-C *Add seal material letter designation. See ordering matrix on page 51. Globe Hand Valve Globe Check Valve Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F:

53 G-Series Valves PS End Connection Socketweld Pipe G-Series - Valves Note: Replace the third digit, S with an N to order a Needle valve. Example: G2NGPS-06-C Note: Replace the third digit, S with a C to order a Check valve. Example: G2CGPS-06-C *Add seal material letter designation. See ordering matrix on page 51. Globe Hand Valve Globe Check Valve Schoolhouse Road, Kennett Square, P: PA P: F:

54 CPV Manufacturing is a member of 503 Schoolhouse Road, Kennett Square, American PA Engineering P: Trusted Worldwide F: