Safety Stations with Eye/Face Wash

Transcription

1 Safety Stations with ye/face Wash F G1950 Safety Station with ye/face Wash, Stainless Steel owl pplication: ombination eye/face wash and shower safety station. Two large FS-Plus spray-type outlet heads deliver a flood of water for rinsing eyes and face. Shower Head: 10" diameter orange S plastic. Shower Valve: 1" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod. Spray Head ssembly: Two FS-Plus spray heads. ach head has a flip top dust cover, internal flow control and filter to remove impurities from water. ye/face Wash owl: 11-1/2" stainless steel. ye/face Wash Valve: 1/2" IPS chrome plated brass stay-open ball valve. Valve is US-made with chrome plated brass ball and Teflon seals. Pipe and Fittings: Schedule 40 galvanized steel. Furnished with orange polyethylene covers for vertical piping for high visibility and corrosion resistance. Supply: 1-1/4" NPT female top or side inlet. Waste: 1-1/4" NPT female outlet. Outlet can be positioned at either 9-1/4" or 19-5/8" above finished floor by reversing lower pipe nipples. Sign: Furnished with NSI-compliant identification sign. Quality ssurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment. vailable Options F G Powder coated finish on galvanized Pipe and Fittings:. vailable colors include orange, yellow, red and green. F F20 Regulates shower flow rate to 20 GPM. F HS uxiliary hand-held drench hose for rinsing eyes, face or body. F GRN Green S plastic shower head. F YL Yellow S plastic shower head. F SSH Stainless steel shower head. F P lectric Light and larm Horn Light and alarm horn summon assistance when eye/face wash or shower is activated. F P Modesty urtain Modesty curtain for mounting on safety station. F TMV G3800LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by NSI Z

2 Safety Stations with ye/face Wash F G1950 Safety Station with ye/face Wash, Stainless Steel owl 5 3/4" (146mm) STINLSS STL TUTING RM 24" (610mm) 1" IPS HROM PLT RSS STY-OPN LL VLV 1-1/4" NPT FML INLT 29" (737mm) S PLSTI SHOWR H N LOW Ø10" (254mm) 23 1/2" (597mm) NOTS: 1. H GS-PLUS SPRY H HS "FLIP-TOP" UST OVR, INTRNL FLOW ONTROL N FILTR TO RMOV IMPURITIS FROM TH WTR FLOW. 2. RVRSING TH TWO LOWST PIP NIPPLS RISS TH RIN OUTLT TO 19-5/8".F.F. 89" (2261mm) 84" (2134mm) STINLSS STL PULL RO GLVNIZ STL PIP N FITTINGS 1-1/4" NPT FML INLT (PLUGG) 6 1/2" (165mm) (2) FS-PLUS SPRY HS STINLSS STL OWL Ø11 1/8" (283mm) 64 3/4" (1645mm) POWR-OT ST LUMINUM FLG HNL 1/2" IPS HROM PLT RSS STY- OPN LL VLV 6" (152mm) 5" (127mm) 37 1/2" (953mm) 9 1/4" (235mm) TIL "" UNIVRSL FLOOR FLNG POWR OT ST LUMINUM FLOOR FLNG (S TIL "") Ø7/16" MOUNTING SLOTS ON 7-5/8" OLT IRL Ø9" (229mm) 9 1/4" (235mm) 1-1/4" NPT FML OUTLT this space for architect/engineer approval Sign Included ue to continuing product improvement, the information contained in this document is subject to change without notice. ll dimensions are ± 1/4" (6mm).

3 Parts List Safety Stations Item Part Number escription Shower Heads P ORG Orange S Plastic Shower Head P GRN Green S Plastic Shower Head P YL Yellow S Plastic Shower Head P ia. Stainless Steel Shower Head Shower Head lbows RS-OR Orange S Plastic lbow RS-GR Green S Plastic lbow RS-Y Yellow S Plastic lbow S 1 IPS Galvanized Steel Street lbow Shower Valve ssembly I P H 1 IPS hrome Plated rass Stay-Open all Valve, Single ctivation. Furnished with stainless steel actuating arm. Galvanized Pipe Packs P Galvanized Steel Pipe Pack for Units with yewash owl P Galvanized Steel Pipe Pack for arrier- Free Units P Orange Pipe overs yewash Valve ssemblies P H 1/2 IPS hrome Plated rass all Valve with Power oated luminum Flag Handle P H-HF 1/2 IPS hrome Plated rass all Valve with Power oated luminum Flag Handle for Units with Hand/Foot ontrol F Powder oated ast luminum Floor Flange, 1-1/4 NPT Female onnection G P Stainless Steel Foot Treadle and Return Spring with luminum levis Pin H See Page 2 yewash and ye/face Wash ssemblies H Shower Pull Rods I P Stainless Steel Pull Rod P /2 Stainless Steel Pull Rod G F

4 Parts List yewash and ye/face Wash ssemblies for Safety Stations Item Part Number escription Spray Head ust overs P GS-Plus Spray Head ssy. P Outlet ssemblies FS-Plus Spray Head ssy. P R (2) GS-Plus Spray Heads with hrome Plated rass Fittings P R (2) FS-Plus Spray Heads with hrome Plated rass Fittings P R (4) GS-Plus Spray Heads with hrome Plated rass Fittings P R (4) GS-Plus Spray Heads with hrome Plated rass Fittings for arrier-free Units I /8 IPS X 2-1/4 rass Shank Item Part Number escription owls ORG-R Orange S Plastic owl GRN-R Green S Plastic owl YL-R Yellow S Plastic owl R Stainless Steel owl R Stainless Steel owl for arrier-free Units rain Plate ssemblies P rain Plate ssembly for Plastic owls P rain Plate ssembly for Stainless owls Note: Includes rain Plate, upped Washer, nd Gasket Waste Receptor R Waste Receptor with Flared Nipple oupling and Gasket, 1 1/2 NPT Male Outlet

5 ssembly Instructions Safety Stations Safety stations are designed for easy assembly in the field. ssentially, these units are assembled from the bottom up, as described below: 1. ssemble floor flange (), 1 1/4 IPS x 6 1/4 nipple (), and plugged outlet tee (). If unit has a foot treadle, the floor flange and treadle are pre-assembled. Position foot treadle for proper access by users, and tee for connection to drain. IMPORTNT: Plugged tee () must be oriented with plugged end down to assure proper drainage. 2. ssemble 1 1/4 IPS x 16 5/8 nipple () and frame assembly (). Position frame assembly for proper access by users. 3. ssemble 1 1/4 IPS x 32 nipple (F) and inlet tee (G). Position tee for connection to supply. If the top vertical inlet will be employed, plug tee with supplied 1 1/4 IPS square head plug. 4. ssemble 1 1/4 IPS x 22 nipple (H) and 1 1/4 x 1 IPS reducing inlet tee (I). Position tee forward for proper location of shower. If the back horizontal inlet will be employed, plug tee with supplied 1 1/4 IPS square head plug. 5. ssemble 1 IPS x 8 7/8 nipple (J), emergency shower valve (K), 1 IPS x 10 1/2 nipple (L), elbow (M), and shower head (N). 6. Place cupped, stainless steel washer (O), rubber gasket (P), and bowl (Q) onto waste receptor. enter components to assure a watertight seal. 7. Thread drain plate (R) down onto mounting shank as far as possible. If neccessary, rotate bowl clockwise to draw drain plate down onto mounting shank. 8. Thread eye or eye/face wash spray head assembly onto mounting shank. Position outlet heads for proper access by user. 9. Secure entire unit to floor and/or wall for stability. 10. If unit has foot treadle, connect foot treadle chain to valve/handle assembly. 11. ttach orange plastic pipe wrap and sign. Notes: 1. ll threads are tapered pipe and require pipe joint compound or Teflon tape to assure watertight connection. 2. If unit is furnished with corrosion-resistant powder coating, care must be taken to avoid damaging finish during assembly. For best results, a strap wrench should be used. 3. Test the entire unit for proper operation. 4. The use of dielectric unions is required when connecting to copper supply to avoid premature corrosion. N M L 10 1/2 Nipple K J 8 7/8 Nipple I 22 NIPPL H G 32 Nipple F R Q P O 16 5/8 Nipple

6 Parts List GS-Plus and FS-Plus Spray Heads ach spray head head features: Tough polypropylene plastic construction Highly visible integrated nylon dust cover asily accessible 1.8 GPM (GS-Plus ) or 3.2 GPM (FS-Plus ) flow controls. ense (60 pore per inch) polyurethane filter Unique design provides a consistently soft, full spray of water across a range of working pressures from 30 to 100 PSI Item Part Number escription P GS-Plus Spray Head (assembled) P R ust over and ap ssembly R 60 PPI Polyurethane Filter R 1.8 GPM Flow ontrol P FS-Plus Spray Head (assembled) F P R ust over and ap ssembly G R 60 PPI Polyurethane Filter H R 3.2 GPM Flow ontrol F G IMPORTNT In order to operate properly, the flow control must be inserted into the body concave end first. H

7 . SS-25* - ombination eye/face wash and shower safety station with S plastic shower head (optional stainless steel shower head SSH ), stainless steel bowl, powder coated cast aluminum flag handle and floor flange, 1 ¼ IPS Schedule 40 galvanized pipe and fittings, 1 IPS and ½ IPS U.S. made chrome plated brass stay open ball valves, and polished stainless steel pull rod. Unit shall have (2) polypropylene FS Plus spray heads with integral flip-top dust covers, filters, and 3.2-GPM flow control orifices mounted on a chrome plated brass eyewash assembly. Unit shall include NSI compliant sign.. Performance: Unit shall meet or exceed NSI Z , and come with a full 2- year warranty.. Fixture: Guardian quipment G1950 and G1950SSH