G1994HFC Safety Station with WideArea Eye/Face Wash, Hand and Foot Control, All-Stainless Steel

Transcription

1 Safety Stations with Widerea ye/face Wash G1994HF Safety Station with Widerea ye/face Wash, Hand and Foot ontrol, ll-stainless Steel pplication: ll-stainless steel combination Widerea eye/face wash and shower safety station. Stainless steel construction is ideal for highly corrosive environments and clean room applications. ye/face wash is activated by flag handle or foot treadle. Four GS-Plus spray-type outlet heads deliver a flood of water over a wide area of coverage for complete rinsing of eyes and face. Shower Head: 10" diameter stainless steel. Shower Valve: 1" IPS Type 316 stainless steel stay-open ball valve. Valve has stainless steel ball and Teflon seals. Furnished with stainless steel actuating arm and 29" stainless steel pull rod. Spray Head ssembly: Four GS-Plus spray heads. ach head has a flip top dust cover, internal flow control and filter to remove impurities from the water flow. ye/face Wash owl: 11-1/2" diameter stainless steel. ye/face Wash Valve: 1/2" IPS Type 316 stainless steel stayopen ball valve. Valve has stainless steel ball and Teflon seals. Valve is activated by flag handle or foot treadle. Unit remains in operation until handle is returned to closed position. Pipe nd Fittings: Schedule 40 Type 304 brushed stainless steel. Furnished with orange polyethylene covers for vertical piping for high visibility. Supply: 1-1/4" NPT female top or side inlet. Waste: 1-1/4" NPT female outlet. Sign: Furnished with NSI-compliant identification sign. Quality ssurance: Valve and spray head assemblies are factory assembled and water tested prior to shipment. vailable Options Stainless steel cover for eye/face wash bowl. F20 Regulates shower flow rate to 20 GPM. P lectric Light and larm Horn Light and alarm horn summon assistance when eye/face wash or shower is activated. P Modesty urtain Modesty curtain for mounting on safety station. TMV G3800LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as required by NSI Z

2 Safety Stations with Widerea ye/face Wash G1994HF Safety Station with Widerea ye/face Wash, Hand and Foot ontrol, ll-stainless Steel 1" IPS STY-OPN LL VLV 5 3/4" (146mm) TUTING RM 24" (610mm) 1 1/4" NPT FML INLT 29" (737mm) SHOWR H 10" I. (254mm) 23 1/2" (597mm) NOTS: 1. H GS-PLUS SPRY H HS "FLIP-TOP" UST OVR, INTRNL FLOW ONTROL N FILTR TO RMOV IMPURITIS FROM TH WTR FLOW. PULL RO PIP N FITTINGS 1 1/4" NPT FML INLT (PLUGG) 89 1/4" (2267mm) 83" (2108mm) 5" (127mm) (4) GS-PLUS SPRY HS OWL FLG HNL Ø11 1/8" (283mm) 1/2" IPS STINLSS STL STY-OPN LL VLV 65" (1651mm) 5 1/8" (130mm) 4 1/2" (114mm) 9 1/4" (235mm) 29" HIN TIL "" FLOOR FLNG 38" (965mm) 1 1/4" NPT FML OUTLT (4) 5/8" I. MOUNTING HOLS ON 3 1/2"OLT IRL 8 1/4" (210mm) FOOT TRL 5" (127mm) this space for architect/engineer approval FLOOR FLNG (S TIL "") Sign Included ue to continuing product improvement, the information contained in this document is subject to change without notice. ll dimensions are ± 1/4" (6mm).

3 Parts List Stainless Steel Safety Stations Item Part Number escription P ia. Stainless Steel Shower Head IPS Stainless Steel lbow Shower Valve ssembly P H 1 IPS Stainless Steel Stay-Open all Valve, Single ctivation. Furnished with stainless steel actualing arm. Pipe Packs P Stainless Steel Pipe Pack for Units with yewash owl P Stainless Steel Pipe Pack for arrier-free Units P Orange Pipe overs I J yewash Valve ssemblies P H 1/2 IPS Stainless Steel all Valve with Stainless Steel Flag Handle P H-HF 1/2 IPS Stainless Steel all Valve with Stainless Steel Flag Handle for Units with Hand/Foot ontrol F F Stainless Steel Floor Flange, 1 1/4 NPT Female onnection G P SS Stainless Steel Foot Treadle and Return Spring with luminum levis Pin H See Page 2 yewash and ye/face Wash ssemblies Shower Pull Rods H I P Stainless Steel Pull Rod P /2 Stainless Steel Pull Rod Sign J P G mergency Safety Station Sign G F

4 Parts List yewash and ye/face Wash ssemblies for Stainless Steel Safety Stations Item Part Number escription Spray Head ust overs GS-Plus Spray Head ssy FS-Plus Spray Head ssy. Outlet ssemblies P SS-R (2) GS-Plus Spray Heads with Stainless Steel Fittings P SS-R (2) FS-Plus Spray Heads with Stainless Steel Fittings P SS-R (4) GS-Plus Spray Heads with Stainless Steel Fittings P SS-R (4) GS-Plus Spray Heads with Stainless Steel Fittings for arrier-free Units SI /8 IPS X 2-1/4 Stainless Steel Shank Item Part Number escription owls R Stainless Steel owl R Stainless Steel owl for arrier-free Units X Stainless Steel owl with Neck X Stainless Steel owl with Neck for arrier-free Units rain Plate ssemblies P rain Plate ssembly for Plastic owls P rain Plate ssembly for Stainless owls Note: Includes rain Plate, upped Washer, nd Gasket

5 ssembly Instructions Stainless Steel Safety Stations Safety stations are designed for easy assembly in the field. ssentially, these units are assembled from the bottom up, as described below: 1. ssemble floor flange (), 1 1/4 IPS x 6 5/8 plugged nipple (), and outlet tee (). If unit has a foot treadle, the floor flange and treadle are pre-assembled. Position foot treadle for proper access by users, and tee for connection to drain. 2. ssemble 1 1/4 IPS x 17 3/4 nipple () and frame assembly (). Position frame assembly for proper access by users. 3. ssemble 1 1/4 IPS x 32 nipple (F) and inlet tee (G). Position tee for connection to supply. If the top vertical inlet will be employed, plug tee with supplied 1 1/4 IPS square head plug. 4. ssemble 1 1/4 IPS x 22 nipple (H) and 1 1/4 x 1 IPS reducing inlet tee (I). Position tee forward for proper location of shower. If the back horizontal inlet will be employed, plug tee with supplied 1 1/4 IPS square head plug. 5. ssemble 1 IPS x 8 7/8 nipple (J), emergency shower valve (K), 1 IPS x 10 1/2 nipple (L), elbow (M), and shower head (N). 6. Place cupped, stainless steel washer (O), rubber gasket (P), and bowl (Q) onto waste receptor. enter components to assure a watertight seal. 7. Thread drain plate (R) down onto mounting shank as far as possible. If neccessary, rotate bowl clockwise to draw drain plate down onto mounting shank. 8. Thread eye or eye/face wash spray head assembly onto mounting shank. Position outlet heads for proper access by user. 9. Secure entire unit to floor and/or wall for stability. 10. If unit has foot treadle, connect foot treadle chain to valve/handle assembly. 11. ttach orange plastic pipe wrap and sign. Notes: 1. ll threads are tapered pipe and require pipe joint compound or Teflon tape to assure watertight connection. 2. If unit is furnished with corrosion-resistant powder coating, care must be taken to avoid damaging finish during assembly. For best results, a strap wrench should be used. 3. Test the entire unit for proper operation. 4. The use of dielectric unions is required when connecting to copper supply to avoid premature corrosion. N M L 10 1/2 Nipple K J 8 7/8 Nipple I 22 Nipple H G 32 Nipple F R Q P O 17 3/4 Nipple

6 Parts List GS-Plus and FS-Plus Spray Heads ach spray head head features: Tough polypropylene plastic construction Highly visible integrated nylon dust cover asily accessible 1.8 GPM (GS-Plus ) or 3.2 GPM (FS-Plus ) flow controls. ense (60 pore per inch) polyurethane filter Unique design provides a consistently soft, full spray of water across a range of working pressures from 30 to 100 PSI Item Part Number escription P GS-Plus Spray Head (assembled) P R ust over and ap ssembly R 60 PPI Polyurethane Filter R 1.8 GPM Flow ontrol P FS-Plus Spray Head (assembled) F P R ust over and ap ssembly G R 60 PPI Polyurethane Filter H R 3.2 GPM Flow ontrol F G IMPORTNT In order to operate properly, the flow control must be inserted into the body concave end first. H

7 . SS-37* - orrosion resistant, all stainless steel construction, combination eye/face wash and shower safety station with hand and foot control, stainless steel shower head, stainless steel bowl, stainless steel flag handle and floor flange, 1 ¼ IPS Schedule 40 stainless steel pipe and fittings, 1 IPS and ½ IPS U.S. made stainless steel stay open ball valves, and polished stainless steel pull rod. Unit shall have (4) polypropylene GS Plus spray heads with integral flip-top dust covers, filters, and 1.8-GPM flow control orifices mounted on a stainless steel head assembly. Unit shall include NSI compliant sign.. Performance: Unit shall meet or exceed NSI Z , and come with a full 2- year warranty.. Fixture: Guardian quipment G1994HF