CREEK Technical Services, LLC
|
|
- Merryl Smith
- 5 years ago
- Views:
Transcription
1 Technicl Services, LLC Certificte of uthoriztion No Edinburgh Dr Tmp, FL (813) EVLUTION REPORT FLORID BUILDING CODE, 6 TH EDITION (2017) Mnufcturer: VRITILE INC. Issued ugust 13, Denny Rd. Ste. 200 Wilmington, DE (541) Mnufcturing: Qulity ssurnce: Belgium UL LLC (QU9625) SCOPE Ctegory: Roofing Subctegory: Metl Roofing Code Sections: , , , , Properties: Wind Resistnce, Wind-Driven Rin, Physicl Properties REFERENCES Entity Report No. Stndrd Yer PRI Construction Mterils Technologies (TST5878) MTTE STM G TS PRI Construction Mterils Technologies (TST5878) MTTE STM B TS PRI Construction Mterils Technologies (TST5878) MTTE STM E PRI Construction Mterils Technologies (TST5878) VRT UL PRI Construction Mterils Technologies (TST5878) VRT TS 125 UL 580 UL PRI Construction Mterils Technologies (TST5878) VRT TS PRI Construction Mterils Technologies (TST5878) VRT TS 125 UL 580 UL PRI Construction Mterils Technologies (TST5878) VRT TS UL LLC (TST9628) ER ICC-ES C10 ICC-ES C VR b FL17750-R4 Pge 1 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
2 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck PRODUCT DESCRIPTION Bond (7 pn) Mteril: Bevertil Tile; in. x 50 in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section Clssic Mteril: Metl pnel; in. x 49.8 in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section Gllo Mteril: Metl pnel; in. x in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section VR b FL17750-R4 Pge 2 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
3 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck ipnel (non-hvhz only) Mteril: Shingle; in. x in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section ishke (non-hvhz only) Mteril: Shke; in. x in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section ishingle (non-hvhz only) Mteril: Shingle; in. x in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section VR b FL17750-R4 Pge 3 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
4 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck islte (non-hvhz only) Mteril: Slte; in. x in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section Mistrl Mteril: Metl pnel; in. x in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section Rivier Mteril: Metl pnel; in. x in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section VR b FL17750-R4 Pge 4 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
5 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck Shke Mteril: Wood shke; in. x 49.8 in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section Viksen Mteril: Wood shingle; in. x in. coverge Preformed, fstened, stoned-coted steel pnels Min. 26 g. STM 792 Z50; F y = min. 50 ksi; Shll conform with FBC Section VR b FL17750-R4 Pge 5 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
6 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck PPROVED SSEMBLIES System 1 10 Fsteners Bond (7 pn), Clssic, Gllo, Mistrl, Shke, or Viksen Slope: Roof Deck: Underlyment: ttchment: Mximum Design Pressures: Exposure 3:12 or greter Solid or closely fitted min. 15/32 in. plywood shething for new nd existing construction t mx. 24 in. spn; In the HVHZ, new construction shll be min. 19/32 in. plywood t mx. 24 in. spn; Designed by others in ccordnce with FBC requirements. Instlled in ccordnce with FBC requirements. In the HVHZ, the minimum underlyment shll be STM D 226, Type II instlled s described in RS 115 Section 4. t the eve nd rke edges, the underlyment shll be folded down to cover the edge of the shething. Bond (7 pn), Clssic, Gllo, Mistrl, Shke or Viksen pnels instlled with five (5) #10-15 x 2-1/2 WoodGrip HiLo HWH wood screws long the bck shelf of ech pnel nd five (5) #10-15 x 2-1/2 WoodGrip HiLo HWH wood screws through the nose of ech pnel s shown on following pge. Pnels pplied with 14-1/2 in. exposure nd overlpped djcently 2-1/2 in. Fsteners must be corrosion resistnt in ccordnce with section psf Pressure clculted using 2:1 mrgin of sfety per Mximum Men Roof Heights for Gble/Hip Roofs Slopes 2:12 12:12 9 Bsic Wind Speed (mph) Zone 1 Field D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft Zone 2 Perimeter C 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 38 ft D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 50 ft 27 ft 19 ft Zone 3 Corner B 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 42 ft N C 60 ft 60 ft 60 ft 60 ft 48 ft 27 ft 19 ft N N D 60 ft 60 ft 60 ft 42 ft 20 ft N N N N Notes: 1) Exposure ctegory for the structure loction shll be s defined in the Florid Building Code 2) Limittions re bsed on the exposed re of 10ft 2 or less 3) Topogrphic fctors such s escrpments or hills re not included in the bove ssessment 4) pplicble for Enclosed Buildings without overhngs 5) N = Not llowed 6) K d = ) Projects with men roof heights of greter thn 60 ft shll be evluted by licensed design professionl 8) See pge 13 for detils for dimensions nd locles of Zone 1, 2, nd 3 9) V ult is shown in the bove tble. Design pressures re clculted using V sd = V ult 0.6 per ) For Hip roofs between 2:12 nd 5.6:12, Zone 3 shll be treted s Zone 2. Continued on next pge VR b FL17750-R4 Pge 6 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
7 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck System 1 10 Fsteners Bond (7 pn), Clssic, Gllo, Mistrl, Shke, or Viksen Bond Clssic Gllo Mistrl Shke Viksen VR b FL17750-R4 Pge 7 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
8 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck System 2 16 Fsteners Bond (7 pn), Clssic, Gllo, Mistrl, Shke, or Viksen Slope: Roof Deck: Underlyment: ttchment: Mximum Design Pressures: Exposure 3:12 or greter Solid or closely fitted min. 15/32 in. plywood shething for new nd existing construction t mx. 24 in. spn; In the HVHZ, new construction shll be min. 19/32 in. plywood t mx. 24 in. spn; Designed by others in ccordnce with FBC requirements. Instlled in ccordnce with FBC requirements. In the HVHZ, the minimum underlyment shll be STM D 226, Type II instlled s described in RS 115 Section 4. t the eve nd rke edges, the underlyment shll be folded down to cover the edge of the shething. Bond (7 pn), Clssic, Gllo, Mistrl, Shke or Viksen pnels instlled with eight (8) #10-15 x 2-1/2 WoodGrip HiLo HWH wood screws long the bck shelf of ech pnel nd eight (8) #10-15 x 2-1/2 WoodGrip HiLo HWH wood screws through the nose of ech pnel s shown on following pge. Pnels pplied with 14-1/2 in. exposure nd overlpped djcently 2-1/2 in. Fsteners must be corrosion resistnt in ccordnce with section psf Pressure clculted using 2:1 mrgin of sfety per Mximum Men Roof Heights for Gble/Hip Roofs Slopes 2:12 12:12 9 Bsic Wind Speed (mph) Zone 1 Field D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft Zone 2 Perimeter D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 48 ft 27 ft Zone 3 Corner B 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 42 ft C 60 ft 60 ft 60 ft 60 ft 60 ft 46 ft 26 ft 19 ft N D 60 ft 60 ft 60 ft 60 ft 38 ft 19 ft N N N Notes: 1) Exposure ctegory for the structure loction shll be s defined in the Florid Building Code 2) Limittions re bsed on the exposed re of 10ft 2 or less 3) Topogrphic fctors such s escrpments or hills re not included in the bove ssessment 4) pplicble for Enclosed Buildings without overhngs 5) N = Not llowed 6) K d = ) Projects with men roof heights of greter thn 60 ft shll be evluted by licensed design professionl 8) See pge 13 for detils for dimensions nd locles of Zone 1, 2, nd 3 9) V ult is shown in the bove tble. Design pressures re clculted using V sd = V ult 0.6 per ) For Hip roofs between 2:12 nd 5.6:12, Zone 3 shll be treted s Zone 2. Continued on next pge VR b FL17750-R4 Pge 8 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
9 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck System 2 16 Fsteners Bond (7 pn), Clssic, Gllo, Mistrl, Shke, or Viksen Bond Clssic Gllo Mistrl Shke Viksen VR b FL17750-R4 Pge 9 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
10 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck System 3 10 Fsteners Rivier Slope: Roof Deck: Underlyment: 3:12 or greter Solid or closely fitted min. 15/32 in. plywood shething for new nd existing construction t mx. 24 in. spn; In the HVHZ, new construction shll be min. 19/32 in. plywood t mx. 24 in. spn; Designed by others in ccordnce with FBC requirements. Instlled in ccordnce with FBC requirements. In the HVHZ, the minimum underlyment shll be STM D 226, Type II instlled s described in RS 115 Section 4. t the eve nd rke edges, the underlyment shll be folded down to cover the edge of the shething. ttchment: Mximum Design Pressures: Rivier pnels instlled with five (5) #10-15 x 2-1/2 WoodGrip HiLo HWH wood screws long the bck shelf of ech pnel nd five (5) #10-15 x 2-1/2 WoodGrip HiLo HWH wood screws through the nose of ech pnel. Pnels pplied with 14-1/2 in. exposure nd overlpped djcently 2-1/2 in. Fsteners must be corrosion resistnt in ccordnce with section psf Pressure clculted using 2:1 mrgin of sfety per Exposure Mximum Men Roof Heights for Gble/Hip Roofs Slopes 2:12 12:12 9 Bsic Wind Speed (mph) Zone 1 Field D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft Zone 2 Perimeter C 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 52 ft D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 40 ft 22 ft Zone 3 Corner B 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 52 ft 36 ft C 60 ft 60 ft 60 ft 60 ft 60 ft 38 ft 22 ft N N D 60 ft 60 ft 60 ft 60 ft 31 ft 19 ft N N N VR b FL17750-R4 Pge 10 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
11 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck System 4 16 Fsteners Rivier Slope: Roof Deck: Underlyment: ttchment: Mximum Design Pressures: 3:12 or greter Solid or closely fitted min. 15/32 in. plywood shething for new nd existing construction t mx. 24 in. spn; In the HVHZ, new construction shll be min. 19/32 in. plywood t mx. 24 in. spn; Designed by others in ccordnce with FBC requirements. Instlled in ccordnce with FBC requirements. In the HVHZ, the minimum underlyment shll be STM D 226, Type II instlled s described in RS 115 Section 4. t the eve nd rke edges, the underlyment shll be folded down to cover the edge of the shething. Rivier pnels instlled with eight (8) #10-15 x 2-1/2 WoodGrip HiLo HWH wood screws long the bck shelf of ech pnel nd eight (8) #10-15 x 2-1/2 WoodGrip HiLo HWH wood screws through the nose of ech pnel s shown on following pge. Pnels pplied with 14-1/2 in. exposure nd overlpped djcently 2-1/2 in. Fsteners must be corrosion resistnt in ccordnce with section psf Pressure clculted using 2:1 mrgin of sfety per Exposure Mximum Men Roof Heights for Gble/Hip Roofs Slopes 2:12 12:12 9 Bsic Wind Speed (mph) Zone 1 Field D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft Zone 2 Perimeter D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft Zone 3 Corner D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 55 ft Notes: 1) Exposure ctegory for the structure loction shll be s defined in the Florid Building Code 2) Limittions re bsed on the exposed re of 10ft 2 or less 3) Topogrphic fctors such s escrpments or hills re not included in the bove ssessment 4) pplicble for Enclosed Buildings without overhngs 5) N = Not llowed 6) K d = ) Projects with men roof heights of greter thn 60 ft shll be evluted by licensed design professionl 8) See pge 13 for detils for dimensions nd locles of Zone 1, 2, nd 3 9) V ult is shown in the bove tble. Design pressures re clculted using V sd = V ult 0.6 per ) For Hip roofs between 2:12 nd 5.6:12, Zone 3 shll be treted s Zone 2. VR b FL17750-R4 Pge 11 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
12 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck System 5 ipnel, ishke, ishingle or islte (non-hvhz only) Slope: Roof Deck: Underlyment: ttchment: Mximum Design Pressures: 3:12 or greter Solid or closely fitted min. 15/32 in. plywood shething for new nd existing construction t mx. 24 in. spn; Designed by others in ccordnce with FBC requirements. Instlled in ccordnce with FBC requirements. ipnel, ishke, ishingle or islte pnels instlled with ten (10) #10 x 1.5 in. HWH dul thred fsteners with 0.5 in. O.D. seling wshers locted 1 in. down from the top of the pnel nd pproximtely 5 in. on center between edge fsteners. Edge fsteners instlled 2 in. from ech edge. Fsteners must be corrosion resistnt in ccordnce with section nd penetrte through the shething min. 3/8 in psf Pressure clculted using 2:1 mrgin of sfety per Exposure Mximum Men Roof Heights for Gble/Hip Roofs Slopes 2:12 12:12 9 Bsic Wind Speed (mph) Zone 1 Field D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft Zone 2 Perimeter C 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 52 ft 31 ft D 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 40 ft 22 ft N Zone 3 Corner B 60 ft 60 ft 60 ft 60 ft 60 ft 60 ft 52 ft 36 ft N C 60 ft 60 ft 60 ft 60 ft 40 ft 22 ft N N N D 60 ft 60 ft 60 ft 35 ft 19 ft N N N N Notes: 1) Exposure ctegory for the structure loction shll be s defined in the Florid Building Code 2) Limittions re bsed on the exposed re of 10ft 2 or less 3) Topogrphic fctors such s escrpments or hills re not included in the bove ssessment 4) pplicble for Enclosed Buildings without overhngs 5) N = Not llowed 6) K d = ) Projects with men roof heights of greter thn 60 ft shll be evluted by licensed design professionl 8) See pge 13 for detils for dimensions nd locles of Zone 1, 2, nd 3 9) V ult is shown in the bove tble. Design pressures re clculted using V sd = V ult 0.6 per ) For Hip roofs between 2:12 nd 5.6:12, Zone 3 shll be treted s Zone 2. VR b FL17750-R4 Pge 12 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
13 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck Gble Hip Dimension shll be 10% of the lest horizontl dimension or (0.4 x Men Roof Height), whichever is smller, but not less thn either 4% of the lest horizontl dimension or 3ft. LIMITTIONS 1. Fire clssifiction is not within the scope of this evlution. 2. The roof deck nd the roof deck ttchment shll be designed by others to meet the minimum design lods estblished for components nd cldding nd in ccordnce with FBC requirements. 3. Reroofing shll be in ccordnce with FBC Section 1511 or Section 1521 within the HVHZ. 4. Instlltion of the evluted products shll comply with this report, the FBC nd RS 133 in the HVHZ nd the mnufcturer s published ppliction instructions. Where discrepncies exist between these sources, the more restrictive nd FBC complint instlltion detil shll previl. 5. ll products listed in this report shll be mnufctured under qulity ssurnce progrm in complince with Rule 61G20-3. VR b FL17750-R4 Pge 13 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
14 Technicl Services, LLC VRITILE INC. Metl Roofing Direct to Deck COMPLINCE STTEMENT The products evluted herein by Zchry R. Priest, P.E. hve demonstrted complince with the Florid Building Code, 6 th Edition (2017) s evidenced in the referenced documents submitted by the nmed mnufcturer. Zchry R. Priest, P.E. Florid Registrtion No Orgniztion No. NE9641 CERTIFICTION OF INDEPENDENCE Technicl Services, LLC does not hve, nor will it cquire, finncil interest in ny compny mnufcturing or distributing products under this evlution. Technicl Services, LLC is not owned, operted, or controlled by ny compny mnufcturing or distributing products under this evlution. Zchry R. Priest, P.E. does not hve, nor will cquire, finncil interest in ny compny mnufcturing or distributing products under this evlution. Zchry R. Priest, P.E. does not hve, nor will cquire, finncil interest in ny other entity involved in the pprovl process of the product. END OF REPORT VR b FL17750-R4 Pge 14 of 14 This evlution report is provided for Stte of Florid product pprovl under Rule 61G20-3. The mnufcturer shll notify Technicl Services, LLC of ny product chnges or qulity ssurnce chnges throughout the durtion for which this report is vlid. This evlution report does not express nor imply wrrnty, instlltion, recommended use, or other product ttributes tht re not specificlly ddressed herein.
CREEK Technical Services, LLC
EVALUATION REPORT 2010 FLORIDA BUILDING CODE Manufacturer: ALUCOM, LLC Issued October 21, 2014 2145 NW 115 th Street Miami, FL 33172 (305) 414-2705 www.alucom.com Manufacturing Plants: Quality Assurance:
More informationCREEK Technical Services, LLC
a Certificate of Authorization No. 29824 17520 Edinburgh Drive Tampa, FL 33647 (813) 480-3421 EVALUATION REPORT FLORIDA BUILDING CODE, 6 TH EDITION (2017) Manufacturer: Issued March 19, 2018 2145 NW 115
More informationWATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
More informationCASEMENT - LARGE MISSILE IMPACT
CSEMENT - LRGE MISSILE IMPCT 1/4" MX. O.. FLNGE WIDTH 7" MX. UNIT WIDTH 6 1/4" MX. SSH WIDTH 1 /4" GLSS DLO GENERL NOTES: 1. THE PRODUCT SHOWN HEREIN IS DESIGNED ND MNUFCTURED TO COMPLY WITH THE FLORID
More informationPOWER BUTTON: 25mm (1") CONDUIT X 3048mm (10'-0") LONG TO HOUSE POWER AND CONTROL CABLES (SUPPLIED BY DIEBOLD)
R Easy-aire GX PNEUMTIC DELIVERY SYSTEM 24mm(") DI. PNEUMTIC TUBE SYSTEM 86G OPERTOR ND 8G CUSTOMER DETILS L962 CLL -8-999-6 OPERTOR CONTROL PNEL PROJECTION FILE NO. 8-26 REV. SUBJECT TO CHNGE W ITHOUT
More informationCCD-493 KIT SERIES INSTRUCTION SHEET
(COMPLETE CCD-493-W KIT ILLUSTRTED. CUT-OUTS IN TRCK TO EXPOSE COMPONENTS) CCD-493 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING S. CN BE INSTLLED
More informationTITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exia & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH
TITAN DIFFERENTIAL PRESSURE DPF266 ATEX/IECEx Exd, Exi & INDUSTRIAL DIFFERENTIAL PRESSURE, SWITCH This rnge hs been used to monitor very smll chnges in vcuums nd hs been specified extensively for offshore
More informationCC-410 KIT SERIES INSTRUCTION SHEET
(COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN
More informationALUMINUM ENTRANCE DOORS
DOORS REVISION SHEET DESRIPTION 1 - GENERL NOTES & GLZING DETIL 2 - ELEVTIONS, NHOR LYOUT & ONFIGURTIONS 3 ELEVTIONS, NHOR LYOUT & ONFIGURTIONS - - VERTIL DETILS - HED & SILL OPTIONS 2. DEQUY OF THE EXISTING
More informationCCS-810 KIT SERIES INSTRUCTION SHEET
(COMPLETE KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CCS-810 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMMING OF SLIDING DOORS. CN BE INSTLLED
More informationFire dampers. The art of handling air. Type FKA-EU tested to EN FKA-EU/DE/BE/en. according to Declaration of Performance
FKA-EU/DE/BE/en Fire dmpers Type FKA-EU tested to EN 1366-2 ccording to Declrtion of Performnce DoP / FKA-EU / DE / 2013 / 001 The rt of hndling ir Contents Description Description 2 Correct use 3 Construction
More informationS»'94**gres* 6,=4.4.0 R\OF e.. S Z * 0 10.,5251, *S .//0/1111\\\\\\ VIWINCO INC. S-SERIES IMPACT AW/FIX STACKED 04/13/12
ISIONS DTE 07/27/5 ISED INSTLLTION DETILS RL THE PRODUCT SHOWIN HEREIN IS DESIGNED ND MNUFCTURED TO COMPLY WITH REQUIREME OF THE FLORID UILDING CODE 2 WOOD FRMING ND MSONRY OPENIING TO E DESIGNED l\id
More informationABB industrial drives. Mechanical installation instructions ACS880 multidrive cabinets
ABB industril drives Mechnicl instlltion instructions ACS880 multidrive cbinets List of relted mnuls Generl drive mnuls (in ll deliveries) Electricl plnning instructions for ACS880 multidrive cbinets nd
More informationInstallation and Operational Instructions for ROBA -slip hubs Sizes 0 12 (B.1.0.GB)
Plese red these Opertionl Instructions crefully nd follow them ccordingly! Ignoring these Instructions my led to mlfunctions or to clutch filure, resulting in dmge to other prts. These Instlltion nd Opertionl
More informationCable Trolleys for C-Rails Program
Cble Trolleys for C-Rils Progrm 02 0 0260 Contents C-Ril nd Accessories Progrm 02 C-Ril x... 2 Trck Coupler... 2 End Stop... 2 Trck Support Brcket... 2 Support Arm nd Girder Clip... 3 Brcket... 3 Cble
More information631 ALLOWANES AND TOLERANCES
631 ALLOWANES AND TOLERANCES ANSI Fits. Tbles 3 through 9 inclusive show series of stndrd types nd clsses of fits on unilterl hole bsis, such tht the fit produced by mting prts in ny one clss will produce
More informationGUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
More informationRPEA3-06. Functional Description HA /2011. Directional Control Valves Solenoid Operated with 8W Coil. Replaces HA /2007
Directionl Control Vlves Solenoid Operted with 8W Coil RPEA3-06 0/20 Size 06 (D 03) 350 br (5076 PSI) 80 L/min (2 GPM) Replces 2/2007 /3-, /2- wy directionl control vlves Enclosure type to IP65 Push button
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L08 CLL -800--600 R CS 0 FULL FUNCTION TERMINL " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I, CEN III GS OR CEN IV GS SFES SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS
More information203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT NOTE: 203mm (8") MAXIMUM WALL THICKNESS IN AREA OF UNIT (2) EACH SIDE OF SAFE CEN I SAFE ONLY
L0 CLL -800--600 R CS 0 FULL FUNCTION VESTIBULE TERMINL " OR " DISPLY-THROUGH 0mm ( MXIMUM WLL 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More information330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT. 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT TYPICAL ACCESS TO LEVELING 15
L CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL 0mm ( 6" ) CEN I, CEN III GS, or CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationRoller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
More informationProduct range MEGAlife
Product rnge Fx enquiries: +49 89 76909-11 sles@iwis.com MEGAlife MEGAlife mintennce free roller nd conveyor chins cn be pplied in ll res where post instlltion lubriction is not t ll or only prtly possible.
More information6'R 2'-4" 5'RR 5-4"'
24'R 1'-3" INLET 24'R 1'-3" 24'R 1'-3" INLET 5'R 5' 5'R 4'/INLET REVISION HISTORY REV. DESCRIPTION DTE ECO BY RELESED FOR QUOTE RHOUSTON B DDED DIGS MWILLIMS 11 MIRROR NUMBER: MDE FROM: CHECK IN DTE/TIME:
More informationTITAN ULTRA LOW. PF266 ATEX/IECEx Exd, Exia & INDUSTRIAL ULTRA LOW PRESSURE SWITCH FEATURES ULTRA LOW PRESSURE
IAN ULRA LOW PF266 AEX/IECEx Exd, Exi & INDUSRIAL ULRA LOW SWICH his rnge hs been used to monitor extremely smll chnges in pressure nd hs been specified extensively for offshore pplictions. Incorporting
More informationData Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
More informationDIEBOLD 3750 CASH RECYCLER TERMINAL. 13mm ( 2") UL SAFE - 15" OR 19" DISPLAY THROUGH THE WALL 330mm (13") PLAN VIEW FRONT ELEVATION SECTION
L8 CLL -800--600 R DIEBOLD 0 CSH RECYCLER TERMINL mm ( ") UL SFE - " OR " DISPLY THROUGH THE WLL 0mm (") 64 SFE ( 6 ") CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationAltRider LLC. Enjoy it, show it off, and most of all, RIDE IT! Venture On, Jeremy LeBreton. Triumph Tiger Explorer 1200 Crash Bars.
AltRider Crsh Brs for the Triumph Tiger Explorer 00 INSTALLATION INSTRUCTIONS Der Rider, Thnk you for choosing AltRider! Whether sesoned world dventurer or first time ADV-Newie, we welcome you to the AltRider
More informationDIEBOLD IN LOBBY TELLER (ILT) PORTRAIT OR LANDSCAPE INSTALLED WITH A COIN RECYCLER SIDE CAR PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7
L2 CLL -800--600 TP-826-00. R CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE DIEBOLD 00 - IN LOBBY TELLER (ILT) PORTRIT OR LNDSCPE
More informationDIEBOLD 5550 CASH DISPENSER THROUGH 330mm (13") MAXIMUM WALL PLAN VIEW FRONT ELEVATION SIDE ELEVATION CONSUMER ACCESS DIMENSIONS
L0 CLL -800--600 R DIEBOLD 0 CSH DISPENSER THROUGH 0mm (") MXIMUM WLL mm ( " ) UL CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationCS 7750 FULL FUNCTION TERMINAL 15" OR 19" DISPLAY - THROUGH THE WALL 330mm (13")
L08 CLL -800--600 " OR " DISPLY - THROUGH THE WLL 0mm (") 40mm ( 6") CEN I CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationCOIN DISPENSER SIDE CAR FOR INSTALLATION NEXT TO DIEBOLD IN LOBBY TELLER (ILT) PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 7 CALL
SIDE CR FOR INSTLLTION NEXT TO DIEBOLD 00 - IN LOBBY TELLER (ILT) L2 CLL -800--600 CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND SITE PREPRTION GUIDE
More informationPERSEUS ULTRA LOW PRESSURE
PERSEUS ULTRA LOW PRESSURE PF60 ATEX & IECEx Exd, Exi & INDUSTRIAL ULTRA LOW PRESSURE SWITCH This rnge of switches fetures robust high qulity housing with 1 or 2 seled SPDT microswitches nd hs been designed
More informationR E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO E R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO E EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT ECOMES
More informationSpecifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits
PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4
More informationMPC COBRA SERIES. Manually Programmable Cylindrical Lock D
51120-D MPC COBRA SERIES Mnully Progrmmle Cylindricl Lock 575 Birch Street Forestville, CT 06010 technicl support: 866-322-1237 fx: 866-322-1233 http://www.irsupport.net 57010-H 12-19-2005 Introduction
More information422 South Forest Street, Seattle, WA Tel: Fax:
422 South Forest Street, Settle, WA 98134 Tel: 206-623-8750 Fx: 206-623-2091 Februry 23, 2015 PCI Job # 15-2210 McDonld Miller 7717 Detroit Ave SW Settle, WA 98106 Attention: Dn McCrtt Project: Block 45
More informationChain conveyors with endless chains with feed dogs in closed troughs are suitable for the transport of bulky material.
C o n v e y ing PPliCtiON Chin conveyors with endless chins with feed dogs in closed troughs re suitble for the trnsport of bulky mteril. This version of Vecopln-chin conveyors trnsports the mteril in
More informationSUNCOAST CREDIT UNION
INSTLLTION LOCTION OWNER OF RECORD: 0 E HILLSOROUGH VE TMP, FL 04 PV SYSTEM DT PV MODULES: POWER. KW C POWER KW INVERTER 0KW0KWKW MODULES SW W M: W.4"/L." RE:.04 SQFT WEIGHT:. L MEN ROOF HEIGHT: FT STRINGS:
More informationOPTIONAL 178mm (7") SPACER AVAILABLE FOR WALL THICKNESSES UP TO 152mm (6") 330mm (13") MAXIMUM WALL THICKNESS IN AREA OF UNIT
L88 CLL -0--600 R DIEBOLD 0 CSH RECYCLER WITH COIN 40mm ( 6") CEN I, CEN III GS or CEN IV GS SFES THROUGH 0mm (") MXIMUM WLL 64 SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND
More informationPERSEUS MEDIUM PRESSURE PF61 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED WITH AEx (NEC 505) Exd, Exia & INDUSTRIAL PRESSURE SWITCH
PERSEUS MEDIUM PRESSURE PF6 & PF62 PERSEUS ATEX/ IECEx OR TRI- CERTIFIED ITH AEx (NEC 5) Exd, Exi & INDUSTRIAL PRESSURE SITCH This rnge of switches fetures robust high qulity housing with or 2 seled SPDT
More informationJob Sheet 3. Pump Installation OBJECTIVE PROCEDURE. Installation of the Motor and Centrifugal Pump on the Pump Universal Base
Job Sheet 3 Pump Instlltion OBJECTIVE To instll pump, perform shft lignment, nd instll coupling. PROCEDURE Before proceeding with this job, complete the sfety check list in Appendix B. Instlltion of the
More informationJUMO MIDAS C18 SW. OEM seawater pressure transmitter. Applications. Brief description. Customer benefits. Special features. Approvals/approval marks
Pge /8 JUMO MIDAS C8 SW OEM sewter pressure trnsmitter Applictions wter tretment reverse osmosis, e.g. sewter deslintion plnts purifiction plnts orgnic cids, e.g. cetic cid solutions contining chloride,
More informationDIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CEN I, CEN III GAS, CEN IV GAS or CEN IV GAS EX SAFES
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY CEN I, CEN III GS, CEN IV GS or CEN IV GS EX SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL
More informationCS 7780 FULL FUNCTION DRIVE-UP TERMINAL
L CLL -800--600 CS 80 FULL FUNCTION DRIVE-UP TERMINL mm ( ") UL - "or " DISPLY THROUGH 0mm (8") MXIMUM WLL CONSULT WITH DIEBOLD NIXDORF INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE
More informationORIENTAL MOTOR GENERAL CATALOG. Linear Heads A-227. Features A-228 General Specifications A-232 Product Specifications A-233. Standard AC Motors
ORIENTAL MOTOR GENERAL CATALOG Stndrd AC Motors Induction Motors Reversible Motors Synchronous Motors Liner Heds Fetures A-228 Generl Specifictions A-232 Product Specifictions A-233 Torque Motors FBL2
More information(mω) 1. Temperature ( C) Voltage (V) ULRG1 /
Resistors Metl Strip Current Sense Resistors Surfce Mount Metl Element Current Metl Element Sense Resistor UR Series UR Current Series Sense Resistor Mke Possible Resistnce R0005 (m ) to R015 (15m ) Metl
More informationDecor Radiators Baseboard
Decor Rditors Bsebord Pedestl 11 (with fins) Avilble in outputs from 1,561 to 10,282 Btu/hr; 2, nd 4 tubes high. 28 (igh Output, with fins) Avilble in outputs from 5,05 to 19,552 Btu/hr; 2 nd 4 tubes high.
More information9900 IN LOBBY TELLER - (ILT) PORTRAIT AND LANDSCAPE DISPLAY PLAN FRONT VIEW SIDE VIEW PAGE 1 OF 6 CALL
00 IN LOBBY TELLER - (ILT) PORTRIT ND L CLL -800--600 40mm ( 6") CEN I / CEN III GS / CEN IV GS SFES CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE PLNNING ND
More informationSHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
More informationSTANDARD AND FULL HEIGHT - REAR LOAD - WITH 40mm (1 16") CEN I, CEN III GAS or CEN IV GAS SAFES
L STNDRD ND FULL HEIGHT - RER LOD - WITH 0mm ( 6") "LL DIMENSIONS ND DESIGN CRITERI PGE OF 8 FRONT - STNDRD HEIGHT SEE PGES and FOR CS 00 STNDRD HEIGHT DETILS FRONT - FULL HEIGHT SEE PGES and FOR CS 00
More informationINSTALLATION GUIDE INSTALLATION GUIDE
INSTALLATION GUIDE INSTALLATION GUIDE CONTACT US By selecting Hiku fn, you ve chosen qulity design, heightened comfort nd effortless conservtion. Use this guide to sfely instll your fn. Plese contct us
More informationJUMO MIDAS S05 OEM pressure transmitter - universal
Delivery ddress: Mckenrodtstrße 4 609 Fuld, Germny Postl ddress: 605 Fuld, Germny Phone: +49 66 600-0 Fx: +49 66 600-607 Hrlow, Essex CM0 DY, UK Phone: +44 79 655 Fx: +44 79 656 Cnstot, NY 0, USA Phone:
More informationSEE PAGES 3 AND 4 OF 7 FOR 3700 CASH RECYCLER THROUGH THE WALL WITH VESTIBULE TRIM KIT REFERENCE FRONT EDGE OF BEZEL FOR DEPTH DIMENSIONS
R DIEBOLD 00 LOBBY CSH RECYCLER- RER LOD L2 CLL -0--600 64 SFE (2 6 ") 40mm ( 6") CEN I SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH
More informationPrint This Page. Return To Index
PLASTI-BOND REDH2OT KNOCKOUT HUBS KNOCKOUT HUBS PRST2 PRSTG2 Knockout Hubs Specifictions Knockout Hubs Configurtions ST STG2 b c STTB STTTB d COMPLIANCES PLASTI-BOND REDH 2 OT ST style knockout hubs re
More information* * * DIEBOLD 3700 LOBBY CASH RECYCLER- FRONT LOAD 15" DISPLAY OR 19" DISPLAY CONSUMER ACCESS DIMENSIONS PLAN VIEW 19" DISPLAY FRONT ELEVATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER- FRONT LOD " DISPLY OR " DISPLY WITH mm ( ") UL SFE CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR DDITIONL DETILS ND INFORMTION. PLESE SEE
More informationConversion to 235/45 R 17 tyres and 8 J x 17 H 2 ET 28 disk wheel 40.01
mb s Instlltion Instructions Conversion to 235/45 R 17 tyres nd 8 J x 17 H 2 ET 28 disk wheel 40.01 Model 124 Excluding vehicles with specil bodywork, sedns with long wheelbse nd 124.020/036/120. All the
More informationHORIZONTAL SLIDER - NON-IMPACT
2 /" FLNGE WIDTH " MX. UNIT WIDTH 3 /" MX. SSH WIDTH HORIZONTL SLIDER - NON-IMPT 3 /" MX. SSH WIDTH 3/" GLSS DLO 3/" GLSS DLO GENERL NOTES:. THE PRODUT SHOWN HEREIN IS DESIGNED ND MNUFTURED TO OMPLY WITH
More informationFLUID SYSTEMS. Products are available from MARYLAND METRICS
FLUID SYSTEMS Products re vilble from MARYLAND METRICS P.O. Box 26 Owings Mills, MD 27 USA ph: (40)58-0 (800)68-80 fx: (40)58-42 (800)872-929 web: http://mdmetric.com emil: sles@mdmetric.com RFQ form:
More information3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationSpark Plug Fouling 3.0 Liter OptiMax
WARRANTY INFORMATION PARTS INFORMATION SERVICE INFORMATION Bulletin No. 2002-07 Circulte to: Sles Mnger Accounting Service Mnger Technicin Prts Mnger Sprk Plug Fouling 3.0 Liter OptiMx Models Affected
More informationVB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
More informationBMW K1600 GT / GTL Engine Protection Bars INSTALLATION INSTRUCTIONS
mde in USA BMW K00 GT / GTL Engine Protection Brs INSTALLATION INSTRUCTIONS The most up to dte instructions cn e downloded from the product pge t ltrider.com, under the instructions t. Der Rider, Thnk
More informationSINEAX C 402 Alarm unit
for DC currents or DC voltges 00 II () G Appliction The lrm unit SINEAX C40 (Figure ) is normlly pplied to monitor the limits of oth current nd voltge mesurements. The sttus of the device is signlled remotely
More informationCommercial Condensing Units
COMMERCIAL C O N D E N S I N G UNITS Commercil Condensing s Heronhill Air Conditioning AN INTRODUCTION TO... Commercil Condensing s J & E Hll Fusion nd Fusion Scroll units offer the perfect solution for
More information* * * 3700 LOBBY CASH RECYCLER. REAR LOAD 13mm ( 2") UL SAFE - 15" DISPLAY OR 19" DISPLAY WITH DETAILS FOR OPTIONAL VESTIBULE INSTALLATION
R L CLL -0--600 64 SFE ( 6 ") DIEBOLD 00 LOBBY CSH RECYCLER RER LOD mm ( ") UL SFE - " DISPLY OR " DISPLY WITH DETILS FOR OPTIONL VESTIBULE INSTLLTION CONSULT WITH DIEBOLD INSTLLTION/SERVICE BRNCH FOR
More informationSECTION BITUMINOUS CONCRETE PAVING AND ATHLETIC SURFACING. PART A and DIVISION 1 of PART B are hereby made a part of this SECTION.
SETION 321800 ITUMINOUS ONRETE PVING ND THLETI SURFING PRT 1 GENERL 1.01 GENERL REQUIREMENTS PRT nd DIVISION 1 of PRT re hereby mde prt of this SETION. Exmine ll conditions s they exist t the project prior
More information2190DF / 2575DF / 2700DF / 2702DF FIRE THEFT SAFE WITH DIGITAL LOCK. Operation and Installation Guide. MANUAL # M
Opertion nd Instlltion Guide 2190DF / 2575DF / 2700DF / 2702DF MANUAL # M08-0284-004 www.firstalert.com FIRE THEFT SAFE WITH DIGITAL LOCK ELECTRONIC LOCK THEFT FIRE Cj de llves MANUAL # M08-0284-004 Overview
More informationCooling Efficiency 2017/2018 Cooling Equipment Rebate Application
Business Appliction Cooling Efficiency 2017/2018 Cooling Equipment Rebte Appliction For use with invoices dted on or fter Jnury 1, 2017 OID: (Internl use only) Business customer informtion Compny nme Dte
More informationtel. +44 (0) 28 37 518111 fx +44 (0) 28 37 528181 e.mil sles@technidrive.co.uk points for considertion when shft mounting direct drive ger units. modern hollow bore output hub ger units lend themselves
More informationSECTION A-A
40.08 D 8 6 5 4 3 2 1 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D C 51.1 48 20.25 18 C 23.68 15.12 NOTE: DRWER UNIT NOT INCLUDED,
More informationu-tec UT Our change system, that makes EVERYTHING possible
u-tec UT Our chnge system, tht mkes EVERYTHING possible Terms nd conditions: You will find them on our website www.heimtec.com Home/Imprint/Terms nd Conditions This ctlogue, including ll its prts, is protected
More informationDPST-NO None 2 channels Auto-reset Inverse 24 VAC/VDC G9SB-2002-A 4 1 channel or 2
Sfety Rely Unit Ultr Slim Sfety Rely Unit Models of width 17.5 mm vilble with 2 or 3 poles. Models of width 22.5 mm with 3 poles lso vilble. Conforms to EN stndrds. (TÜV pprovl) DIN trck mounting possible.
More informationBrazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
More informationPush-in RTD temperature probe for heat meters with connecting cable for thermowells (type PS/PL)
elivery ddress: Mckenrodtstrße 14 36039 Fuld, Germny Postl ddress: 36035 Fuld, Germny Fx: +49 661 6003-607 Emil: mil@jumo.net Temple Bnk, Riverwy Hrlow, Essex, CM20 2Y, UK Fx: +44 1279 62 50 29 Emil: sles@jumo.co.uk
More informationModel 1001/1001HPS Drinking Fountain
INSTLLTION, OPERTION & MINTENNCE INSTRUCTIONS Kleppe Lane Sparks, NV 89-667 (77) 9-72 Fax (77) 9-72 E-mail: haws@hawsco.com website: www.hawsco.com Model 00/00HPS Drinking Fountain No. 20760(9) NOTE TO
More informationCompact Design. Geislinger
Compct Design Geislinger SAE-Coupling he technology behind the Geislinger steel spring coupling with its extrordinry relibility hs been proven for more thn 50 yers. his successful design hs now been further
More informationPrecision Pressure Transmitter with Switching Contacts and Display. Interface Setup program. Display 4 characters. Switching output 1.
Dt sheet 405054 Pge 1/7 JUMO DLOS HP Precision Pressure Trnsmitter with Switching Contcts nd Disply Appliction Hydrulic plnts Mchine nd plnt engineering Test benches Lbortory equipment Brief description
More informationAGNES SCOTT OBSERVATORY - SOLAR
GNES SCOTT OBSERVTORY - SOLR ELECTRICL NOTES ELECTRICL REQUIREME PV SYSTEM NOTES Roof-Mounted Installation 6kW W N S E MTERILS ND METHODS REVISION NUMBER - FOR CONSTRUCTION REVISION HISTORY DESCRIPTION
More informationSSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
More informationThe widest range to provide the optimum tailor made solutions to your fume and gas extraction needs.
FUME XTRACTION ARMS Improving your workspce Chemicl resistnt Antisttic Stndrd FX ARMS The widest rnge to provide the optimum tilor mde solutions to your fume nd gs extrction needs. Avilble in Stndrd, Antisttic
More informationJUMO MIDAS C08. OEM Pressure Transmitter Basic. Applications. Brief description. Special features. Customer benefits
Mckenrodtstrße 4 609 Fuld, Allemgne 605 Fuld, Allemgne Tél. : +49 66 600-0 Fx. : +49 66 600-607 B.P. 4500 57075 Metz Cedex, Frnce Tél. : + 87 7 5 00 Fx. : + 87 7 89 00 Industriestrße 8 4700 Eupen, Belgique
More informationHYDRANT & GATE VALVE INSTALLATION
HYDRNT FLG TO BE INSTLLED ON THE NOZZLE SECTION 5' TYPICL (3' MINIMUM) HYDRNT, CLOW MEDLLION 1.0' HYDRNT STEMER KIT - 4.5" NH - 5" STORZ METL FCE DPTER WITH STORZ CP. IF OPTIONL LOCKING CP IS DESIRED,
More informationMNPV6 REV A DISCO 4X FINAL ASSY
NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N
More informationPneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
More informationKING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2
KING COBRA/KING COBRA-2 NARROW STILE SERIES KC9357/KC9357-2 Keypd Progrmmble nd SNAP Comptible Trim For Rim Exit Devices Mounted On Aluminum Doors. 57047-B 04-2007 Contents of the Box KC9357/KC9357-2 INSTALLATION
More informationELECTRICAL SYSTEM 4 D INSTRUMENTATION
ELECTRICAL SYSTEM 4 D 72747 INSTRUMENTATION Tle of Contents Pge Identifiction............................. 4D-1 Specil Informtion....................... 4D-1 Lighting Options....................... 4D-1
More informationPlug-in connectors for power electronics
Courtesy of Steven Engineering, Inc. - 230 Ryn Wy, South Sn Frncisco, CA 980-5370 - Min Office: (650) 588-9200 - Outside Locl Are: (800) 258-9200 - www.stevenengineering.com 480 PHOENIX CONTACT Plug-in
More information76" MAX. FRAME WIDTH 72" MAX. DOOR OPENING 36" MAX. LEAF WIDTH 30 3/8" MAX. D.L.O. A 4 36" MAX. LEAF WIDTH 30 3/8" MAX. D.L.O. F 5
8 3/" X. 8" X. DO OPENING 83 1/2" X. 7" X. H3 " 30" X. " X. JB NERS IDRIL OPTIONL X. DESIGN LOD ± 0.0 PS WHERE USED 3" X. INTIVE B 7" X. 72" X. DO OPENING 3" 3" 3" 3" 3" X. G 3 L1 IN 20" 0 7/8" 1" TIVE
More information1. Energy. Reference approach Sectoral approach Difference Explanation for difference as reported in table 1.A(c) of the CRF
1. Energy Energy - Totl CO 2 emissions from the reference pproch nd the sectorl pproch (2000) CO 2 emissions from totl fuel combustion Reference pproch Sectorl pproch Difference Explntion for difference
More informationSeries 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
More informationTechnical and Performance Aspects of a Dynamic Voltage Restorer
Technicl nd Perfornce Aspects of Dynic Voltge Restorer Author: K. Chn, ABB High Voltge Technologies Ltd., Syste ngineering Division, Switzerlnd Keywords: Voltge sgs itigtion, DVR, GCT, Rel-tie siultor,
More information6/2 way directional valve type 6/2UREM6 and 6/2URMM6
6/2 wy directionl vlve type 6/2UREM6 nd 6/2URMM6 NS 6 dm 3 up to 35 MP up to 5 /min DT SHEET - SERVICE MNU NUL WK 421 54 11.212 PPLICTION Moile 6 wy 2 position stckle directionl vlves type 6/2UREM6...
More information152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
More informationHazardous Location Push Button Specifications
Technicl Dt Hzrdous Loction Push Button Specifictions Bulletin Numers 800G, 800H, nd 800R Topic Pge Topic Pge 800H Type 7&9 Hzrdous Loction Push Buttons 800G Hzrdous Loction Push Buttons Specifictions
More informationSuspension Control Module
User Mnul Suspension Control Module 0099 Before Instlltion Wrning: This owering Module should be instlled by n individul with extensive knowledge in electronics, including: wire identifiction, extrcting
More informationPlan Review Response Letter for Permit PVS02172 Tampa,
llen Gezelman, PE, CSICDT, LEEDP FL 980 88 State Road, # Lutz, FL 8 89099 www.gezelmanpe.com, allen@allengezelmanpe.com To: Hillsborough County 0 E. Kennedy lvd. Tampa, FL 0 uilding Permits Plan Review
More informationDeclaration of Conformance Mercury MerCruiser
NOTE: The following pplies to CE mrked products only. Declrtion of Conformnce Mercury MerCruiser This sterndrive or inbord engine when instlled in ccordnce to Mercury MerCruisers instructions complies
More informationSection 6. Transformers. Table of Contents. General Purpose, Dry Type, 600 Volts and Below. Industrial Control. Instrument, 600 Volt Class
Tble of ontents Section Trnsformers Generl Purpose, Dry Type, 00 Volts nd elow Three-Phse, Energy Efficient Trnsformers -2 Single-Phse, Energy Efficient Trnsformers -2 K-Rted Trnsformers -3 Drive Isoltion
More informationName Model Description/Function. Directional Control Valve Station 5914 Used to activate the Pneumatic Box Feeder B
Job Sheet 4 PLC-Controlled Conveyor nd Sensors OBJECTIVE To fmilirize yourself with the vrious sensors provided with the Flexible Mnufcturing System nd mesure their respective sensing rnges. To use the
More information